Lee Kai Xuan
mbed-os
Fork of
mbed-os
by 
erkin yucel
Diff: targets/TARGET_ONSEMI/TARGET_NCS36510/objects.h
- Revision:
- 0:f269e3021894
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_ONSEMI/TARGET_NCS36510/objects.h Sun Oct 23 15:10:02 2016 +0000
@@ -0,0 +1,200 @@
+/**
+ ******************************************************************************
+ * @file Objects.h
+ * @brief Implements an assertion.
+ * @internal
+ * @author ON Semiconductor
+ * $Rev: 0.1 $
+ * $Date: 2015-11-06 $
+ ******************************************************************************
+ * Copyright 2016 Semiconductor Components Industries LLC (d/b/a ON Semiconductor).
+ * All rights reserved. This software and/or documentation is licensed by ON Semiconductor
+ * under limited terms and conditions. The terms and conditions pertaining to the software
+ * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf
+ * (ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software) and
+ * if applicable the software license agreement. Do not use this software and/or
+ * documentation unless you have carefully read and you agree to the limited terms and
+ * conditions. By using this software and/or documentation, you agree to the limited
+ * terms and conditions.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL,
+ * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ * @endinternal
+ *
+ * @ingroup debug
+ */
+#ifndef OBJECTS_H_
+#define OBJECTS_H_
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "gpio_map.h"
+#include "uart_16c550_map.h"
+#include "PinNames.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "target_config.h"
+#include "spi.h"
+
+typedef enum {
+ FlowControlNone_1,
+ FlowControlRTS_1,
+ FlowControlCTS_1,
+ FlowControlRTSCTS_1
+} FlowControl_1;
+
+struct serial_s {
+ Uart16C550Reg_pt UARTREG;
+ FlowControl_1 FlowCtrl;
+ IRQn_Type IRQType;
+ int index;
+};
+
+typedef struct _gpio_t {
+ GpioReg_pt GPIOMEMBASE;
+ PinName gpioPin;
+ uint32_t gpioMask;
+
+} gpio_t;
+
+
+/* TODO: This is currently a dummy structure; implementation will be done along
+ * with the sleep API implementation
+ */
+typedef struct sleep_s {
+ uint32_t timeToSleep; /* 0: Use sleep type variable to select low power mode; Noz-zero: Selects sleep type based on timeToSleep duration using table 1. sleep below */
+ uint8_t SleepType; /* 0: Sleep; 1: DeepSleep; 2: Coma */
+} sleep_t;
+
+/* Table 1. Sleep
+ ___________________________________________________________________________________
+ | Sleep duration | Sleep Type |
+ |-------------------------------------------------------------------|---------------|
+ | > Zero AND <= SLEEP_DURATION_SLEEP_MAX | sleep |
+ | > SLEEP_DURATION_SLEEP_MAX AND <= SLEEP_DURATION_DEEPSLEEP_MAX | deepsleep |
+ | > SLEEP_DURATION_DEEPSLEEP_MAX | coma |
+ |___________________________________________________________________|_______________|
+
+*/
+
+struct gpio_irq_s {
+ uint32_t pin;
+ uint32_t pinMask;
+ GpioReg_pt GPIOMEMBASE;
+};
+
+typedef struct {
+
+ /* options to configure the ADC */
+ uint8_t interruptConfig; /**< 1= interrupt Enable 0=Interrupt Disable */
+ uint8_t PrescaleVal; /**< Prescaler: Sets the converter clock frequency. Fclk = 32 MHz/(prescaler + 1) where prescaler is the value of this register segment. The minimum tested value is 07 (4 MHz clock) */
+ uint8_t measurementType; /**< 1= Absolute 0= Differential */
+ uint8_t mode; /**< 1= Continuous Conversion 0= Single Shot */
+ uint8_t referenceCh; /**< Selects 1 to 8 channels for reference channel */
+ uint8_t convCh; /**< Selects 1 or 8 channels to do a conversion on.*/
+ uint8_t inputScale; /**< Sets the input scale, 000 ? 1.0, 001 ? 0.6923, 010 ? 0.5294, 011 ? 0.4286, 100 ? 0.3600, 101 ? 0.3103, 110 ? 0.2728, 111 ? 0.2432 */
+ uint8_t samplingTime; /**< Sample Time. Sets the measure time in units of PCLKperiod * (Prescale + 1).*/
+ uint8_t WarmUpTime; /**< The number of converter clock cycles that the state machine dwells in the warm or warm_meas state */
+ uint16_t samplingRate; /**< Sets the sample rate in units of PCLKperiod * (Prescale + 1). */
+
+} analog_config_s;
+
+struct analogin_s {
+
+ analog_config_s *adcConf;
+ AdcReg_pt adcReg;
+ PinName pin;
+ uint8_t pinFlag;
+};
+
+struct pwmout_s {
+
+ PwmReg_pt pwmReg;
+};
+
+struct port_s {
+ GpioReg_pt GPIOMEMBASE;
+ PortName port;
+ uint32_t mask;
+};
+
+typedef enum {
+ littleEndian = 0,
+ bigEndian
+} spi_ipc7207_endian_t, *spi_ipc7207_endian_pt;
+
+/** Type for the clock polarity. */
+typedef enum {
+ activeLow = 0,
+ activeHigh
+} spi_clockPolarity_t, *spi_clockPolarity_pt;
+
+/** Type for the clock phase. */
+typedef enum {
+ risingEdge = 0,
+ fallingEdge
+} spi_clockPhase_t, *spi_clockPhase_pt;
+
+struct spi_s {
+ SpiIpc7207Reg_pt membase; /* Register address */
+ IRQn_Type irq; /* IRQ number of the IRQ associated to the device. */
+ uint8_t irqEnable; /* IRQ enables for 8 IRQ sources:
+ * - bit 7 = Receive FIFO Full
+ * - bit 6 = Receive FIFO 'Half' Full (watermark level)
+ * - bit 5 = Receive FIFO Not Empty
+ * - bit 4 = Transmit FIFO Not Full
+ * - bit 3 = Transmit FIFO 'Half' Empty (watermark level)
+ * - bit 2 = Transmit FIFO Empty
+ * - bit 1 = Transfer Error
+ * - bit 0 = ssIn (conditionally inverted and synchronized to PCLK)
+ * (unused option in current implementation / irq 6 and 7 used) */
+ uint8_t slaveSelectEnable; /* Slave Select enables (x4):
+ * - 0 (x4) = Slave select enable
+ * - 1 (x4) = Slave select disable */
+ uint8_t slaveSelectBurst; /* Slave Select burst mode:
+ * - NO_BURST_MODE = Burst mode disable
+ * - BURST_MODE = Burst mode enable */
+ uint8_t slaveSelectPolarity; /* Slave Select polarity (x4) for up to 4 slaves:
+ * - 0 (x4) = Slave select is active low
+ * - 1 (x4) = Slave select is active high */
+ uint8_t txWatermark; /* Transmit FIFO Watermark: Defines level of RX Half Full Flag
+ * - Value between 1 and 15
+ * (unused option in current implementation / not txWatermark irq used) */
+ uint8_t rxWatermark; /* Receive FIFO Watermark: Defines level of TX Half Full Flag:
+ * - Value between 1 and 15
+ * * (unused option in current implementation / rxWatermark fixed to 1) */
+ spi_ipc7207_endian_t endian; /* Bits endianness:
+ * - LITTLE_ENDIAN = LSB first
+ * - BIG_ENDIAN = MSB first */
+ uint8_t samplingEdge; /* SDI sampling edge (relative to SDO sampling edge):
+ * - 0 = opposite to SDO sampling edge
+ * - 1 = same as SDO sampling edge */
+ uint32_t baudrate; /* The expected baud rate. */
+ spi_clockPolarity_t clockPolarity; /* The clock polarity (active high or low). */
+ spi_clockPhase_t clockPhase; /* The clock phase (sample on rising or falling edge). */
+ uint8_t wordSize; /* The size word size in number of bits. */
+ uint8_t Mode;
+ uint32_t event;
+};
+
+struct i2c_s {
+ uint32_t baudrate; /**< The expected baud rate. */
+ uint32_t I2cStatusFromInt;
+ uint8_t ClockSource; /**< I2C clock source, 0 clkI2C pin, 1 PCLK */
+ uint8_t irqEnable; /**< IRQs to be enabled */
+ I2cIpc7208Reg_pt membase; /**< The memory base for the device's registers. */
+ IRQn_Type irq; /**< The IRQ number of the IRQ associated to the device. */
+ //queue_pt rxQueue; /**< The receive queue for the device instance. */
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif //OBJECTS_H_