Diff: x-nucleo-idb0xa1/x_nucleo_idb0xa1_targets.h

Revision:

130:770ce14d3d15

Child:

140:0cd922dca83c

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/x-nucleo-idb0xa1/x_nucleo_idb0xa1_targets.h	Tue Oct 06 14:25:08 2015 +0200
@@ -0,0 +1,67 @@
+/**
+  ******************************************************************************
+  * @file    x_nucleo_idb0xa1_targets.h
+  * @author  AST / EST
+  * @version V0.0.1
+  * @date    24-July-2015
+  * @brief   This header file is intended to manage the differences between 
+  *          the different supported base-boards which might mount the
+  *          X_NUCLEO_IDB0XA1 BlueNRG BLE Expansion Board.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+ 
+/* Define to prevent from recursive inclusion --------------------------------*/
+#ifndef _X_NUCLEO_IDB0XA1_TARGETS_H_
+#define _X_NUCLEO_IDB0XA1_TARGETS_H_
+ 
+/*** SPI ***/
+/* Use Arduino I2C Connectors */
+#define IDB0XA1_PIN_SPI_MOSI   (D11)
+#define IDB0XA1_PIN_SPI_MISO   (D12)
+#define IDB0XA1_PIN_SPI_nCS    (A1)
+#define IDB0XA1_PIN_SPI_RESET  (D7)
+#define IDB0XA1_PIN_SPI_IRQ    (A0)
+
+/* NOTE: Define beyond macro if you want to compile for a specifically
+         modified version of the X_NUCLEO_IDB0XA1 expansion board in
+         which pin 'D13' (rather than the standard pin 'D3') is used 
+         in order to provide the SPI serial clock.
+	 Expansion boards modified in this way allow to be used on almost
+	 any Arduino-compliant base board.
+*/
+//#define IDB0XA1_D13_PATCH
+
+#if defined(IDB0XA1_D13_PATCH)
+#define IDB0XA1_PIN_SPI_SCK    (D13)
+#else // !defined(IDB0XA1_D13_PATCH)
+#define IDB0XA1_PIN_SPI_SCK    (D3)
+#endif // !defined(IDB0XA1_D13_PATCH)
+
+#endif // _X_NUCLEO_IDB0XA1_TARGETS_H_