Diff: Components/CLT01_38SQ7/CLT01_38S.cpp

Revision:

5:0845d4141a01

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/CLT01_38SQ7/CLT01_38S.cpp	Thu Jul 13 16:43:31 2017 +0000
@@ -0,0 +1,222 @@
+/**
+  ******************************************************************************
+  * @file    CLT01_38S_class.cpp
+  * @author  System Lab Noida
+  * @version V1.0.0
+  * @date    08-July-2015
+  * @brief   PLC_CLT01-38SQ7
+  * This file provides firmware functions for how  to manage I/O from CLT01-38SQ7
+  ==============================================================================    
+ 
+           
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+  
+  /* Includes ------------------------------------------------------------------*/
+#include "plc.h"
+
+#include "CLT01_38S.h"
+    
+/** @addtogroup Drivers     Drivers
+  * @{
+  * @brief Demo Driver Layer
+  */    
+  
+/** @addtogroup BSP     BSP
+  * @{
+  */    
+    
+/** @addtogroup Components     Components
+  * @{
+  */
+
+/** @defgroup CLT01_38S    CLT01_38S
+  * @{ 
+  * @brief Digital Input Driver Layer
+  */
+
+/** @defgroup CLT01_38S_Private_variables     CLT01 38S Private variables
+  * @{
+  * @brief Digital Input Private variables
+  */
+
+/* Number of components */
+uint8_t CLT01_38S::number_of_plc_input_components = 0;
+
+
+/** @defgroup CLT01_38S_Exported_Functions     CLT01 38S Exported Functions
+  * @{
+  * @brief Digital Input exported Function 
+  */
+
+/**********************************************************
+ * @brief Starts the CLT01_38S library
+ * @param  init Initialization structure.
+ * @retval COMPONENT_OK in case of success.
+ **********************************************************/
+status_t CLT01_38S::CLT01_38S_Init(void *init)
+{
+    OTA_Buffer = 0x00;
+    CLT_PARITY_Buffer = 0x00;
+    UVA_Buffer = 0x00;
+    CLT_INPUT_STATUS_Buffer = 0x00;
+    FLAG_CLT_READ = 0;
+    
+    /* Unselect the CLT chip at startup to avoid FAULT */
+    ssel = 1;
+
+    return COMPONENT_OK;
+}
+
+/**********************************************************
+ * @brief Read id
+ * @param id pointer to the identifier to be read.
+ * @retval COMPONENT_OK in case of success.
+ **********************************************************/
+status_t CLT01_38S::CLT01_38S_ReadID(uint8_t *id)
+{
+  *id = plc_input_component_instance;
+
+  return COMPONENT_OK;
+}
+
+/**********************************************************
+ * @brief      CLT Read Status
+ * @param      None
+ * @retval     Status
+ **********************************************************/
+uint8_t CLT01_38S::CLT01_38S_GetReadStatus(void)
+{
+  return FLAG_CLT_READ;
+}
+
+/**********************************************************
+ * @brief      Set CLT Read Status
+ * @param      Status
+ * @retval     None
+ **********************************************************/
+void CLT01_38S::CLT01_38S_SetReadStatus(uint8_t status)
+{
+  FLAG_CLT_READ = status;
+}
+
+/**********************************************************
+ * @brief      INPUT status
+ * @param      None
+ * @retval     Channels status corresponding to 8 inputs 
+ **********************************************************/
+uint8_t CLT01_38S::CLT01_38S_GetInputData(void)
+{
+  CLT_INPUT_STATUS_Buffer = spi_rx_buff[1];
+  
+  return CLT_INPUT_STATUS_Buffer;
+}
+
+/**********************************************************
+ * @brief      CLT Over_Temprature_Alarm
+ * @param      None
+ * @retval     Overtemperature bit, COMPONENT_ERROR in case of alarm
+ **********************************************************/
+status_t CLT01_38S::CLT01_38S_OverTempAlarm(void)
+{
+  OTA_Buffer = spi_rx_buff[0];
+  OTA_Buffer = OTA_Buffer & (0x40);
+ 
+  if(OTA_Buffer == 0x40) {
+    return COMPONENT_OK;
+  } else {
+    return COMPONENT_ERROR;
+  }
+}
+
+/**********************************************************
+ * @brief      CLT Parity_Check_bits
+ * @param      None
+ * @retval     Parity bits for diagnosing inconsistency in data transmission 
+ **********************************************************/
+uint8_t CLT01_38S::CLT01_38S_CheckParity(void)
+{
+  CLT_PARITY_Buffer = spi_rx_buff[0];
+  CLT_PARITY_Buffer = CLT_PARITY_Buffer & (0x3C);
+  CLT_PARITY_Buffer = CLT_PARITY_Buffer >> 2;
+  return CLT_PARITY_Buffer; 
+}
+
+/**********************************************************
+ * @brief      CLT Under_Voltage_Alarm_bit
+ * @param      None
+ * @retval     Under voltage alarm bit, COMPONENT_ERROR in case of alarm
+ **********************************************************/
+status_t CLT01_38S::CLT01_38S_UnderVoltAlarm(void)
+{
+  UVA_Buffer = spi_rx_buff[0];
+  UVA_Buffer = UVA_Buffer & (0x80);
+  
+  if(UVA_Buffer == 0x80) {
+    return COMPONENT_OK;
+  } else{ 
+    return COMPONENT_ERROR; 
+  }
+}
+
+/**********************************************************
+ * @brief  Get input information from input channels component 
+ * @param  rxBuff
+ * @retval None
+ **********************************************************/
+void CLT01_38S::CLT01_38S_DigInpArray_GetInput(uint8_t *inputArray)
+{
+  if(CLT01_38S_SpiReadBytes(spi_tx_buff, spi_rx_buff) != 0) {
+    /* Aborting the program */
+    exit(EXIT_FAILURE);
+  }
+  inputArray[0] = spi_rx_buff[0];
+  inputArray[1] = spi_rx_buff[1];
+}
+
+/**
+  * @} //end CLT01_38S Exported Functions
+  */
+
+/**
+  * @}  //end CLT01_38S Device Driver
+  */
+/**
+  * @}  //end Components
+   */
+/**
+  * @}  //close group  BSP
+  */
+
+/**
+  * @}  //close group  Drivers
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/