Diff: SX1276GenericLib/sx1276/sx1276.h

Revision:

12:046346a16ff4

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/SX1276GenericLib/sx1276/sx1276.h	Sat May 19 15:42:38 2018 +0000
@@ -0,0 +1,642 @@
+/*
+ / _____)             _              | |
+( (____  _____ ____ _| |_ _____  ____| |__
+ \____ \| ___ |    (_   _) ___ |/ ___)  _ \
+ _____) ) ____| | | || |_| ____( (___| | | |
+(______/|_____)_|_|_| \__)_____)\____)_| |_|
+    (C) 2014 Semtech
+
+Description: Actual implementation of a SX1276 radio, inherits Radio
+
+License: Revised BSD License, see LICENSE.TXT file include in the project
+
+Maintainers: Miguel Luis, Gregory Cristian and Nicolas Huguenin
+*/
+
+/*
+ * additional development to make it more generic across multiple OS versions
+ * (c) 2017 Helmut Tschemernjak
+ * 30826 Garbsen (Hannover) Germany
+ */
+
+#ifndef __SX1276_H__
+#define __SX1276_H__
+
+#include "radio.h"
+#include "sx1276Regs-Fsk.h"
+#include "sx1276Regs-LoRa.h"
+
+
+
+/*!
+ * Radio wake-up time from sleep
+ */
+#define RADIO_WAKEUP_TIME                           1 // [ms]
+
+/*!
+ * Sync word for Private LoRa networks
+ */
+#define LORA_MAC_PRIVATE_SYNCWORD                   0x12
+
+/*!
+ * Sync word for Public LoRa networks
+ */
+#define LORA_MAC_PUBLIC_SYNCWORD                    0x34
+
+
+/*!
+ * SX1276 definitions
+ */
+#define XTAL_FREQ                                   32000000
+#define FREQ_STEP                                   61.03515625
+
+#define RX_BUFFER_SIZE                              256
+
+/*!
+ * Constant values need to compute the RSSI value
+ */
+#define RSSI_OFFSET_LF                              -164.0
+#define RSSI_OFFSET_HF                              -157.0
+
+#define RF_MID_BAND_THRESH                          525000000
+
+
+
+
+/*!
+ * Type of the supported board. [SX1276MB1MAS / SX1276MB1LAS]
+ */
+typedef enum BoardType
+{
+    SX1276MB1MAS = 0,
+    SX1276MB1LAS,
+    RFM95_SX1276,
+    MURATA_SX1276,
+    UNKNOWN
+}BoardType_t;
+
+
+typedef enum {
+    LORA_SF6 =  6,  //   64 chips/symbol, SF6 requires an TCXO!
+    LORA_SF7 =  7,  //  128 chips/symbol
+    LORA_SF8 =  8,  //  256 chips/symbol
+    LORA_SF9 =  9,  //  512 chips/symbol
+    LORA_SF10 = 10, // 1024 chips/symbol
+    LORA_SF11 = 11, // 2048 chips/symbol
+    LORA_SF12 = 12, // 4096 chips/symbol
+} lora_spreading_factor_t;
+
+
+typedef enum {  // cyclic error coding to perform forward error detection and correction
+    LORA_ERROR_CODING_RATE_4_5 = 1,   // 1.25x overhead
+    LORA_ERROR_CODING_RATE_4_6 = 2,   // 1.50x overhead
+    LORA_ERROR_CODING_RATE_4_7 = 3,   // 1.75x overhead
+    LORA_ERROR_CODING_RATE_4_8 = 4,   // 2.00x overhead
+} lora_coding_rate_t;
+
+
+typedef enum {
+    RF_FREQUENCY_868_0 = 868000000, // Hz
+    RF_FREQUENCY_868_1 = 868100000, // Hz
+    RF_FREQUENCY_868_3 = 868300000, // Hz
+    RF_FREQUENCY_868_5 = 868500000, // Hz
+} rf_frequency_t;
+
+
+
+/*!
+ * Actual implementation of a SX1276 radio, inherits Radio
+ */
+class SX1276 : public Radio
+{
+protected:
+
+    bool isRadioActive;
+
+    BoardType_t boardConnected; //1 = SX1276MB1LAS; 0 = SX1276MB1MAS
+
+    uint8_t *rxtxBuffer;
+    
+    /*!
+     * Hardware IO IRQ callback function definition
+     */
+    typedef void ( SX1276::*DioIrqHandler )( void );
+
+    /*!
+     * Hardware DIO IRQ functions
+     */
+    DioIrqHandler *dioIrq;
+
+
+
+    RadioSettings_t settings;
+
+    /*!
+     * FSK bandwidth definition
+     */
+    struct BandwidthMap {
+        uint32_t bandwidth;
+        uint8_t  RegValue;
+    };
+    static const struct BandwidthMap FskBandwidths[];
+    static const struct BandwidthMap LoRaBandwidths[];
+    
+protected:
+
+    /*!
+    * Performs the Rx chain calibration for LF and HF bands
+    * \remark Must be called just after the reset so all registers are at their
+    *         default values
+    */
+    void RxChainCalibration( void );
+
+public:
+    SX1276( RadioEvents_t *events);
+    virtual ~SX1276( );
+    
+    
+    
+    
+    //-------------------------------------------------------------------------
+    //                        Redefined Radio functions
+    //-------------------------------------------------------------------------
+    /*!
+     * @brief Return current radio status, returns true if a radios has been found.
+     *
+     * @param [IN] events Structure containing the driver callback functions
+     */
+    virtual bool Init( RadioEvents_t *events );
+
+    /*!
+     *  @brief Initializes the radio registers
+     */
+    virtual void RadioRegistersInit(void);
+
+    /*!
+     * Return current radio status
+     *
+     * @param status Radio status. [RF_IDLE, RX_RUNNING, TX_RUNNING, CAD_RUNNING]
+     */
+    virtual RadioState GetStatus( void ); 
+
+    /*!
+     * @brief Configures the SX1276 with the given modem
+     *
+     * @param [IN] modem Modem to be used [0: FSK, 1: LoRa] 
+     */
+    virtual void SetModem( RadioModems_t modem );
+
+    /*!
+     * @brief Sets the channel frequency
+     *
+     * @param [IN] freq         Channel RF frequency
+     */
+    virtual void SetChannel( uint32_t freq );
+
+    /*!
+     * @brief Sets the channels configuration
+     *
+     * @param [IN] modem      Radio modem to be used [0: FSK, 1: LoRa]
+     * @param [IN] freq       Channel RF frequency
+     * @param [IN] rssiThresh RSSI threshold
+     *
+     * @retval isFree         [true: Channel is free, false: Channel is not free]
+     */
+    virtual bool IsChannelFree( RadioModems_t modem, uint32_t freq, int16_t rssiThresh );
+
+    /*!
+     * @brief Generates a 32 bits random value based on the RSSI readings
+     *
+     * \remark This function sets the radio in LoRa modem mode and disables
+     *         all interrupts.
+     *         After calling this function either Radio.SetRxConfig or
+     *         Radio.SetTxConfig functions must be called.
+     *
+     * @retval randomValue    32 bits random value
+     */
+    virtual uint32_t Random( void );
+
+    /*!
+     * @brief Sets the reception parameters
+     *
+     * @param [IN] modem        Radio modem to be used [0: FSK, 1: LoRa]
+     * @param [IN] bandwidth    Sets the bandwidth
+     *                          FSK : >= 2600 and <= 250000 Hz
+     *                          LoRa: [0: 125 kHz, 1: 250 kHz,
+     *                                 2: 500 kHz, 3: Reserved]
+     * @param [IN] datarate     Sets the Datarate
+     *                          FSK : 600..300000 bits/s
+     *                          LoRa: [6: 64, 7: 128, 8: 256, 9: 512,
+     *                                10: 1024, 11: 2048, 12: 4096  chips]
+     * @param [IN] coderate     Sets the coding rate ( LoRa only )
+     *                          FSK : N/A ( set to 0 )
+     *                          LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8]
+     * @param [IN] bandwidthAfc Sets the AFC Bandwidth ( FSK only )
+     *                          FSK : >= 2600 and <= 250000 Hz
+     *                          LoRa: N/A ( set to 0 )
+     * @param [IN] preambleLen  Sets the Preamble length ( LoRa only )
+     *                          FSK : N/A ( set to 0 )
+     *                          LoRa: Length in symbols ( the hardware adds 4 more symbols )
+     * @param [IN] symbTimeout  Sets the RxSingle timeout value
+     *                          FSK : timeout number of bytes
+     *                          LoRa: timeout in symbols
+     * @param [IN] fixLen       Fixed length packets [0: variable, 1: fixed]
+     * @param [IN] payloadLen   Sets payload length when fixed lenght is used
+     * @param [IN] crcOn        Enables/Disables the CRC [0: OFF, 1: ON]
+     * @param [IN] freqHopOn    Enables disables the intra-packet frequency hopping  [0: OFF, 1: ON] (LoRa only)
+     * @param [IN] hopPeriod    Number of symbols bewteen each hop (LoRa only)
+     * @param [IN] iqInverted   Inverts IQ signals ( LoRa only )
+     *                          FSK : N/A ( set to 0 )
+     *                          LoRa: [0: not inverted, 1: inverted]
+     * @param [IN] rxContinuous Sets the reception in continuous mode
+     *                          [false: single mode, true: continuous mode]
+     */
+    virtual void SetRxConfig ( RadioModems_t modem, uint32_t bandwidth,
+                               uint32_t datarate, uint8_t coderate,
+                               uint32_t bandwidthAfc, uint16_t preambleLen,
+                               uint16_t symbTimeout, bool fixLen,
+                               uint8_t payloadLen,
+                               bool crcOn, bool freqHopOn, uint8_t hopPeriod,
+                               bool iqInverted, bool rxContinuous );
+
+    /*!
+     * @brief Sets the transmission parameters
+     *
+     * @param [IN] modem        Radio modem to be used [0: FSK, 1: LoRa]
+     * @param [IN] power        Sets the output power [dBm]
+     * @param [IN] fdev         Sets the frequency deviation ( FSK only )
+     *                          FSK : [Hz]
+     *                          LoRa: 0
+     * @param [IN] bandwidth    Sets the bandwidth ( LoRa only )
+     *                          FSK : 0
+     *                          LoRa: [0: 125 kHz, 1: 250 kHz,
+     *                                 2: 500 kHz, 3: Reserved]
+     * @param [IN] datarate     Sets the Datarate
+     *                          FSK : 600..300000 bits/s
+     *                          LoRa: [6: 64, 7: 128, 8: 256, 9: 512,
+     *                                10: 1024, 11: 2048, 12: 4096  chips]
+     * @param [IN] coderate     Sets the coding rate ( LoRa only )
+     *                          FSK : N/A ( set to 0 )
+     *                          LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8]
+     * @param [IN] preambleLen  Sets the preamble length
+     * @param [IN] fixLen       Fixed length packets [0: variable, 1: fixed]
+     * @param [IN] crcOn        Enables disables the CRC [0: OFF, 1: ON]
+     * @param [IN] freqHopOn    Enables disables the intra-packet frequency hopping  [0: OFF, 1: ON] (LoRa only)
+     * @param [IN] hopPeriod    Number of symbols bewteen each hop (LoRa only)
+     * @param [IN] iqInverted   Inverts IQ signals ( LoRa only )
+     *                          FSK : N/A ( set to 0 )
+     *                          LoRa: [0: not inverted, 1: inverted]
+     * @param [IN] timeout      Transmission timeout [ms]
+     */
+    virtual void SetTxConfig( RadioModems_t modem, int8_t power, uint32_t fdev,
+                              uint32_t bandwidth, uint32_t datarate,
+                              uint8_t coderate, uint16_t preambleLen,
+                              bool fixLen, bool crcOn, bool freqHopOn,
+                              uint8_t hopPeriod, bool iqInverted, uint32_t timeout );
+
+    
+    /*!
+     * @brief Checks if the given RF frequency is supported by the hardware
+     *
+     * @param [IN] frequency RF frequency to be checked
+     * @retval isSupported [true: supported, false: unsupported]
+     */
+    virtual bool CheckRfFrequency( uint32_t frequency ) = 0;
+    
+    /*!
+     * @brief Computes the packet time on air for the given payload
+     *
+     * \Remark Can only be called once SetRxConfig or SetTxConfig have been called
+     *
+     * @param [IN] modem      Radio modem to be used [0: FSK, 1: LoRa]
+     * @param [IN] pktLen     Packet payload length
+     *
+     * @retval airTime        Computed airTime for the given packet payload length
+     */
+    virtual uint32_t TimeOnAir ( RadioModems_t modem, int16_t pktLen );
+
+    /*!
+     * @brief Sends the buffer of size. Prepares the packet to be sent and sets
+     *        the radio in transmission
+     *
+     * @param [IN]: buffer     Buffer pointer
+     * @param [IN]: size       Buffer size
+     * @param [IN]: buffer     Header pointer
+     * @param [IN]: size       Header size
+     */
+    virtual void Send(void *buffer, int16_t size, void *header = NULL, int16_t hsize = 0);
+
+    /*!
+     * @brief Sets the radio in sleep mode
+     */
+    virtual void Sleep( void );
+    
+    /*!
+     * @brief Sets the radio in standby mode
+     */
+    virtual void Standby( void );
+    
+    /*!
+     * @brief Sets the radio in CAD mode
+     */
+    virtual void StartCad( void );
+
+    /*!
+     * @brief Sets the radio in reception mode for the given time
+     * @param [IN] timeout Reception timeout [ms]
+     *                     [0: continuous, others timeout]
+     */
+    virtual void Rx( uint32_t timeout );
+    
+    /*!
+     * @brief Check is radio receives a signal
+     */
+    virtual bool RxSignalPending();
+
+
+    /*!
+     * @brief Sets the radio in transmission mode for the given time
+     * @param [IN] timeout Transmission timeout [ms]
+     *                     [0: continuous, others timeout]
+     */
+    virtual void Tx( uint32_t timeout );
+
+    /*!
+     * @brief Sets the radio in continuous wave transmission mode
+     *
+     * @param [IN]: freq       Channel RF frequency
+     * @param [IN]: power      Sets the output power [dBm]
+     * @param [IN]: time       Transmission mode timeout [s]
+     */
+
+    virtual void SetTxContinuousWave( uint32_t freq, int8_t power, uint16_t time );
+
+    /*!
+     * @brief Returns the maximal transfer unit for a given modem
+     *
+     * @retval MTU size in bytes
+     */
+    virtual int16_t MaxMTUSize( RadioModems_t modem );
+    
+    /*!
+     * @brief Reads the current RSSI value
+     *
+     * @retval rssiValue Current RSSI value in [dBm]
+     */
+    virtual int16_t GetRssi ( RadioModems_t modem );
+    
+    /*!
+     * @brief Reads the current frequency error
+     *
+     * @retval frequency error value in [Hz]
+     */
+    virtual int32_t GetFrequencyError( RadioModems_t modem );
+    
+    /*!
+     * @brief Writes the radio register at the specified address
+     *
+     * @param [IN]: addr Register address
+     * @param [IN]: data New register value
+     */
+    virtual void Write ( uint8_t addr, uint8_t data ) = 0;
+
+    /*!
+     * @brief Reads the radio register at the specified address
+     *
+     * @param [IN]: addr Register address
+     * @retval data Register value
+     */
+    virtual uint8_t Read ( uint8_t addr ) = 0;
+
+    /*!
+     * @brief Writes multiple radio registers starting at address
+     *
+     * @param [IN] addr   First Radio register address
+     * @param [IN] buffer Buffer containing the new register's values
+     * @param [IN] size   Number of registers to be written
+     */
+    virtual void Write( uint8_t addr, void *buffer, uint8_t size ) = 0;
+
+    /*!
+     * @brief Reads multiple radio registers starting at address
+     *
+     * @param [IN] addr First Radio register address
+     * @param [OUT] buffer Buffer where to copy the registers data
+     * @param [IN] size Number of registers to be read
+     */
+    virtual void Read ( uint8_t addr, void *buffer, uint8_t size ) = 0;
+
+    /*!
+     * @brief Writes the buffer contents to the SX1276 FIFO
+     *
+     * @param [IN] buffer Buffer containing data to be put on the FIFO.
+     * @param [IN] size Number of bytes to be written to the FIFO
+     */
+    virtual void WriteFifo( void *buffer, uint8_t size ) = 0;
+
+    /*!
+     * @brief Reads the contents of the SX1276 FIFO
+     *
+     * @param [OUT] buffer Buffer where to copy the FIFO read data.
+     * @param [IN] size Number of bytes to be read from the FIFO
+     */
+    virtual void ReadFifo( void *buffer, uint8_t size ) = 0;
+    /*!
+     * @brief Resets the SX1276
+     */
+    virtual void Reset( void ) = 0;
+
+    /*!
+     * @brief Sets the maximum payload length.
+     *
+     * @param [IN] modem      Radio modem to be used [0: FSK, 1: LoRa]
+     * @param [IN] max        Maximum payload length in bytes
+     */
+    virtual void SetMaxPayloadLength( RadioModems_t modem, uint8_t max );
+
+    /*!
+     * \brief Sets the network to public or private. Updates the sync byte.
+     *
+     * \remark Applies to LoRa modem only
+     *
+     * \param [IN] enable if true, it enables a public network
+     */
+    virtual void SetPublicNetwork( bool enable );
+
+    /*!
+     * @brief Sets the radio output power.
+     *
+     * @param [IN] power Sets the RF output power
+     */
+    virtual void SetRfTxPower( int8_t power ) = 0;
+    
+    //-------------------------------------------------------------------------
+    //                        Board relative functions
+    //-------------------------------------------------------------------------
+    /*!
+     * Radio registers definition
+     */
+    struct RadioRegisters {
+        ModemType   Modem;
+        uint8_t     Addr;
+        uint8_t     Value;
+    };
+    
+    
+    static const struct RadioRegisters RadioRegsInit[];
+
+    typedef enum {
+        RXTimeoutTimer,
+        TXTimeoutTimer,
+        RXTimeoutSyncWordTimer
+    } TimeoutTimer_t;
+
+
+protected:
+    /*!
+     * @brief Initializes the radio I/Os pins interface
+     */
+    virtual void IoInit( void ) = 0;
+    
+    /*!
+     * @brief Initializes the radio SPI
+     */
+    virtual void SpiInit( void ) = 0;
+
+    /*!
+     * @brief Initializes DIO IRQ handlers
+     *
+     * @param [IN] irqHandlers Array containing the IRQ callback functions
+     */
+    virtual void IoIrqInit( DioIrqHandler *irqHandlers ) = 0;
+
+    /*!
+     * @brief De-initializes the radio I/Os pins interface. 
+     *
+     * \remark Useful when going in MCU lowpower modes
+     */
+    virtual void IoDeInit( void ) = 0;
+
+    /*!
+     * @brief Gets the board PA selection configuration
+     *
+     * @param [IN] channel Channel frequency in Hz
+     * @retval PaSelect RegPaConfig PaSelect value
+     */
+    virtual uint8_t GetPaSelect( uint32_t channel ) = 0;
+
+    /*!
+     * @brief Set the RF Switch I/Os pins in Low Power mode
+     *
+     * @param [IN] status enable or disable
+     */
+    virtual void SetAntSwLowPower( bool status ) = 0;
+
+    /*!
+     * @brief Initializes the RF Switch I/Os pins interface
+     */
+    virtual void AntSwInit( void ) = 0;
+
+    /*!
+     * @brief De-initializes the RF Switch I/Os pins interface 
+     *
+     * \remark Needed to decrease the power consumption in MCU lowpower modes
+     */
+    virtual void AntSwDeInit( void ) = 0;
+
+    /*!
+     * @brief Controls the antenna switch if necessary.
+     *
+     * \remark see errata note
+     *
+     * @param [IN] opMode Current radio operating mode
+     */
+    virtual void SetAntSw( uint8_t opMode ) = 0;
+    
+    typedef void ( SX1276::*timeoutFuncPtr)( void );
+    
+    
+    /*
+     * The the Timeout for a given Timer.
+     */
+    virtual void SetTimeout(TimeoutTimer_t timer, timeoutFuncPtr, int timeout_ms = 0) = 0;
+    
+    /*
+     * A simple ms sleep
+     */
+    virtual void Sleep_ms(int ms) = 0;
+
+protected:
+
+    /*!
+     * @brief Sets the SX1276 operating mode
+     *
+     * @param [IN] opMode New operating mode
+     */
+    virtual void SetOpMode( uint8_t opMode );
+
+    /*
+     * SX1276 DIO IRQ callback functions prototype
+     */
+
+    /*!
+     * @brief DIO 0 IRQ callback
+     */
+    virtual void OnDio0Irq( void );
+
+    /*!
+     * @brief DIO 1 IRQ callback
+     */
+    virtual void OnDio1Irq( void );
+
+    /*!
+     * @brief DIO 2 IRQ callback
+     */
+    virtual void OnDio2Irq( void );
+
+    /*!
+     * @brief DIO 3 IRQ callback
+     */
+    virtual void OnDio3Irq( void );
+
+    /*!
+     * @brief DIO 4 IRQ callback
+     */
+    virtual void OnDio4Irq( void );
+
+    /*!
+     * @brief DIO 5 IRQ callback
+     */
+    virtual void OnDio5Irq( void );
+
+    /*!
+     * @brief Tx & Rx timeout timer callback
+     */
+    virtual void OnTimeoutIrq( void );
+
+    /*!
+     * Returns the known FSK bandwidth registers value
+     *
+     * \param [IN] bandwidth Bandwidth value in Hz
+     * \retval regValue Bandwidth register value.
+     */
+    static uint8_t GetFskBandwidthRegValue( uint32_t bandwidth );
+
+    static uint8_t GetLoRaBandwidthRegValue( uint32_t bandwidth );
+    
+    enum {
+        LORA_BANKWIDTH_7kHz  = 0, //  7.8 kHz requires TCXO
+        LORA_BANKWIDTH_10kHz = 1, // 10.4 kHz requires TCXO
+        LORA_BANKWIDTH_15kHz = 2, // 15.6 kHz requires TCXO
+        LORA_BANKWIDTH_20kHz = 3, // 20.8 kHz requires TCXO
+        LORA_BANKWIDTH_31kHz = 4, // 31.2 kHz requires TCXO
+        LORA_BANKWIDTH_41kHz = 5, // 41.4 kHz requires TCXO
+        LORA_BANKWIDTH_62kHz = 6, // 62.5 kHz requires TCXO
+        LORA_BANKWIDTH_125kHz = 7,
+        LORA_BANKWIDTH_250kHz = 8,
+        LORA_BANKWIDTH_500kHz = 9,
+        LORA_BANKWIDTH_RESERVED = 10,
+    };
+};
+
+#endif // __SX1276_H__