Ward Mattar
This is code is part of a Technion course project in advanced IoT, implementing a device to receive and present sensors data from a Formula racing car built by students at Technion - Israel Institute of Technology.
Fork of
DISCO-L072CZ-LRWAN1_LoRa_PingPong
by 
ST
This is code is part of a Technion course project in advanced IoT, implementing a device to receive sensors data from another L072CZ-LRWAN1 installed on a Formula racing car (built by students at Technion - Israel Institute of Technology), and sends it to a GUI presenting the data (GUI project: github.com/ward-mattar/TechnionFormulaGUI).
How to install
- Create an account on Mbed: https://os.mbed.com/account/signup/
- Import project into Compiler
- In the Program Workspace select "Formula_Nucleo_Receiver"
- Select a Platform like so:
- Click button at top-left
- Add Board
- Search "NUCLEO F103RB" and then "Add to your Mbed Compiler"
- Finally click "Compile", if the build was successful, the binary would download automatically
- To install it on device simply plug it in to a PC, open device drive and drag then drop binary file in it
Diff: FATFileSystem/ChaN/diskio.h
- Revision:
- 12:046346a16ff4
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FATFileSystem/ChaN/diskio.h Sat May 19 15:42:38 2018 +0000
@@ -0,0 +1,80 @@
+/*-----------------------------------------------------------------------/
+/ Low level disk interface modlue include file (C)ChaN, 2014 /
+/-----------------------------------------------------------------------*/
+
+#ifndef _DISKIO_DEFINED
+#define _DISKIO_DEFINED
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define _USE_WRITE 1 /* 1: Enable disk_write function */
+#define _USE_IOCTL 1 /* 1: Enable disk_ioctl fucntion */
+
+#include "integer.h"
+
+
+/* Status of Disk Functions */
+typedef BYTE DSTATUS;
+
+/* Results of Disk Functions */
+typedef enum {
+ RES_OK = 0, /* 0: Successful */
+ RES_ERROR, /* 1: R/W Error */
+ RES_WRPRT, /* 2: Write Protected */
+ RES_NOTRDY, /* 3: Not Ready */
+ RES_PARERR /* 4: Invalid Parameter */
+} DRESULT;
+
+
+/*---------------------------------------*/
+/* Prototypes for disk control functions */
+
+
+DSTATUS disk_initialize (BYTE pdrv);
+DSTATUS disk_status (BYTE pdrv);
+DRESULT disk_read (BYTE pdrv, BYTE* buff, DWORD sector, UINT count);
+DRESULT disk_write (BYTE pdrv, const BYTE* buff, DWORD sector, UINT count);
+DRESULT disk_ioctl (BYTE pdrv, BYTE cmd, void* buff);
+
+
+/* Disk Status Bits (DSTATUS) */
+
+#define STA_NOINIT 0x01 /* Drive not initialized */
+#define STA_NODISK 0x02 /* No medium in the drive */
+#define STA_PROTECT 0x04 /* Write protected */
+
+
+/* Command code for disk_ioctrl fucntion */
+
+/* Generic command (Used by FatFs) */
+#define CTRL_SYNC 0 /* Complete pending write process (needed at _FS_READONLY == 0) */
+#define GET_SECTOR_COUNT 1 /* Get media size (needed at _USE_MKFS == 1) */
+#define GET_SECTOR_SIZE 2 /* Get sector size (needed at _MAX_SS != _MIN_SS) */
+#define GET_BLOCK_SIZE 3 /* Get erase block size (needed at _USE_MKFS == 1) */
+#define CTRL_TRIM 4 /* Inform device that the data on the block of sectors is no longer used (needed at _USE_TRIM == 1) */
+
+/* Generic command (Not used by FatFs) */
+#define CTRL_POWER 5 /* Get/Set power status */
+#define CTRL_LOCK 6 /* Lock/Unlock media removal */
+#define CTRL_EJECT 7 /* Eject media */
+#define CTRL_FORMAT 8 /* Create physical format on the media */
+
+/* MMC/SDC specific ioctl command */
+#define MMC_GET_TYPE 10 /* Get card type */
+#define MMC_GET_CSD 11 /* Get CSD */
+#define MMC_GET_CID 12 /* Get CID */
+#define MMC_GET_OCR 13 /* Get OCR */
+#define MMC_GET_SDSTAT 14 /* Get SD status */
+
+/* ATA/CF specific ioctl command */
+#define ATA_GET_REV 20 /* Get F/W revision */
+#define ATA_GET_MODEL 21 /* Get model name */
+#define ATA_GET_SN 22 /* Get serial number */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif