How to measure water in a reservoir
Dependencies: Cayenne-MQTT-mbed Cayenne-LPP
mbed-lora-radio-drv/SX1276/registers/sx1276Regs-LoRa.h
- Committer:
- wamae
- Date:
- 2019-03-08
- Revision:
- 0:7bfeb237e600
File content as of revision 0:7bfeb237e600:
/** / _____) _ | | ( (____ _____ ____ _| |_ _____ ____| |__ \____ \| ___ | (_ _) ___ |/ ___) _ \ _____) ) ____| | | || |_| ____( (___| | | | (______/|_____)_|_|_| \__)_____)\____)_| |_| (C) 2014 Semtech Description: SX1276 LoRa modem registers and bits definitions License: Revised BSD License, see LICENSE.TXT file include in the project Maintainer: Miguel Luis and Gregory Cristian Copyright (c) 2017, Arm Limited and affiliates. SPDX-License-Identifier: BSD-3-Clause */ #ifndef __SX1276_REGS_LORA_H__ #define __SX1276_REGS_LORA_H__ /*! * ============================================================================ * SX1276 Internal registers Address * ============================================================================ */ #define REG_LR_FIFO 0x00 // Common settings #define REG_LR_OPMODE 0x01 #define REG_LR_FRFMSB 0x06 #define REG_LR_FRFMID 0x07 #define REG_LR_FRFLSB 0x08 // Tx settings #define REG_LR_PACONFIG 0x09 #define REG_LR_PARAMP 0x0A #define REG_LR_OCP 0x0B // Rx settings #define REG_LR_LNA 0x0C // LoRa registers #define REG_LR_FIFOADDRPTR 0x0D #define REG_LR_FIFOTXBASEADDR 0x0E #define REG_LR_FIFORXBASEADDR 0x0F #define REG_LR_FIFORXCURRENTADDR 0x10 #define REG_LR_IRQFLAGSMASK 0x11 #define REG_LR_IRQFLAGS 0x12 #define REG_LR_RXNBBYTES 0x13 #define REG_LR_RXHEADERCNTVALUEMSB 0x14 #define REG_LR_RXHEADERCNTVALUELSB 0x15 #define REG_LR_RXPACKETCNTVALUEMSB 0x16 #define REG_LR_RXPACKETCNTVALUELSB 0x17 #define REG_LR_MODEMSTAT 0x18 #define REG_LR_PKTSNRVALUE 0x19 #define REG_LR_PKTRSSIVALUE 0x1A #define REG_LR_RSSIVALUE 0x1B #define REG_LR_HOPCHANNEL 0x1C #define REG_LR_MODEMCONFIG1 0x1D #define REG_LR_MODEMCONFIG2 0x1E #define REG_LR_SYMBTIMEOUTLSB 0x1F #define REG_LR_PREAMBLEMSB 0x20 #define REG_LR_PREAMBLELSB 0x21 #define REG_LR_PAYLOADLENGTH 0x22 #define REG_LR_PAYLOADMAXLENGTH 0x23 #define REG_LR_HOPPERIOD 0x24 #define REG_LR_FIFORXBYTEADDR 0x25 #define REG_LR_MODEMCONFIG3 0x26 #define REG_LR_FEIMSB 0x28 #define REG_LR_FEIMID 0x29 #define REG_LR_FEILSB 0x2A #define REG_LR_RSSIWIDEBAND 0x2C #define REG_LR_TEST2F 0x2F #define REG_LR_TEST30 0x30 #define REG_LR_DETECTOPTIMIZE 0x31 #define REG_LR_INVERTIQ 0x33 #define REG_LR_TEST36 0x36 #define REG_LR_DETECTIONTHRESHOLD 0x37 #define REG_LR_SYNCWORD 0x39 #define REG_LR_TEST3A 0x3A #define REG_LR_INVERTIQ2 0x3B // end of documented register in datasheet // I/O settings #define REG_LR_DIOMAPPING1 0x40 #define REG_LR_DIOMAPPING2 0x41 // Version #define REG_LR_VERSION 0x42 // Additional settings #define REG_LR_PLLHOP 0x44 #define REG_LR_TCXO 0x4B #define REG_LR_PADAC 0x4D #define REG_LR_FORMERTEMP 0x5B #define REG_LR_BITRATEFRAC 0x5D #define REG_LR_AGCREF 0x61 #define REG_LR_AGCTHRESH1 0x62 #define REG_LR_AGCTHRESH2 0x63 #define REG_LR_AGCTHRESH3 0x64 #define REG_LR_PLL 0x70 /*! * ============================================================================ * SX1276 LoRa bits control definition * ============================================================================ */ /*! * RegFifo */ /*! * RegOpMode */ #define RFLR_OPMODE_LONGRANGEMODE_MASK 0x7F #define RFLR_OPMODE_LONGRANGEMODE_OFF 0x00 // Default #define RFLR_OPMODE_LONGRANGEMODE_ON 0x80 #define RFLR_OPMODE_ACCESSSHAREDREG_MASK 0xBF #define RFLR_OPMODE_ACCESSSHAREDREG_ENABLE 0x40 #define RFLR_OPMODE_ACCESSSHAREDREG_DISABLE 0x00 // Default #define RFLR_OPMODE_FREQMODE_ACCESS_MASK 0xF7 #define RFLR_OPMODE_FREQMODE_ACCESS_LF 0x08 // Default #define RFLR_OPMODE_FREQMODE_ACCESS_HF 0x00 #define RFLR_OPMODE_MASK 0xF8 #define RFLR_OPMODE_SLEEP 0x00 #define RFLR_OPMODE_STANDBY 0x01 // Default #define RFLR_OPMODE_SYNTHESIZER_TX 0x02 #define RFLR_OPMODE_TRANSMITTER 0x03 #define RFLR_OPMODE_SYNTHESIZER_RX 0x04 #define RFLR_OPMODE_RECEIVER 0x05 // LoRa specific modes #define RFLR_OPMODE_RECEIVER_SINGLE 0x06 #define RFLR_OPMODE_CAD 0x07 /*! * RegFrf (MHz) */ #define RFLR_FRFMSB_434_MHZ 0x6C // Default #define RFLR_FRFMID_434_MHZ 0x80 // Default #define RFLR_FRFLSB_434_MHZ 0x00 // Default /*! * RegPaConfig */ #define RFLR_PACONFIG_PASELECT_MASK 0x7F #define RFLR_PACONFIG_PASELECT_PABOOST 0x80 #define RFLR_PACONFIG_PASELECT_RFO 0x00 // Default #define RFLR_PACONFIG_MAX_POWER_MASK 0x8F #define RFLR_PACONFIG_OUTPUTPOWER_MASK 0xF0 /*! * RegPaRamp */ #define RFLR_PARAMP_TXBANDFORCE_MASK 0xEF #define RFLR_PARAMP_TXBANDFORCE_BAND_SEL 0x10 #define RFLR_PARAMP_TXBANDFORCE_AUTO 0x00 // Default #define RFLR_PARAMP_MASK 0xF0 #define RFLR_PARAMP_3400_US 0x00 #define RFLR_PARAMP_2000_US 0x01 #define RFLR_PARAMP_1000_US 0x02 #define RFLR_PARAMP_0500_US 0x03 #define RFLR_PARAMP_0250_US 0x04 #define RFLR_PARAMP_0125_US 0x05 #define RFLR_PARAMP_0100_US 0x06 #define RFLR_PARAMP_0062_US 0x07 #define RFLR_PARAMP_0050_US 0x08 #define RFLR_PARAMP_0040_US 0x09 // Default #define RFLR_PARAMP_0031_US 0x0A #define RFLR_PARAMP_0025_US 0x0B #define RFLR_PARAMP_0020_US 0x0C #define RFLR_PARAMP_0015_US 0x0D #define RFLR_PARAMP_0012_US 0x0E #define RFLR_PARAMP_0010_US 0x0F /*! * RegOcp */ #define RFLR_OCP_MASK 0xDF #define RFLR_OCP_ON 0x20 // Default #define RFLR_OCP_OFF 0x00 #define RFLR_OCP_TRIM_MASK 0xE0 #define RFLR_OCP_TRIM_045_MA 0x00 #define RFLR_OCP_TRIM_050_MA 0x01 #define RFLR_OCP_TRIM_055_MA 0x02 #define RFLR_OCP_TRIM_060_MA 0x03 #define RFLR_OCP_TRIM_065_MA 0x04 #define RFLR_OCP_TRIM_070_MA 0x05 #define RFLR_OCP_TRIM_075_MA 0x06 #define RFLR_OCP_TRIM_080_MA 0x07 #define RFLR_OCP_TRIM_085_MA 0x08 #define RFLR_OCP_TRIM_090_MA 0x09 #define RFLR_OCP_TRIM_095_MA 0x0A #define RFLR_OCP_TRIM_100_MA 0x0B // Default #define RFLR_OCP_TRIM_105_MA 0x0C #define RFLR_OCP_TRIM_110_MA 0x0D #define RFLR_OCP_TRIM_115_MA 0x0E #define RFLR_OCP_TRIM_120_MA 0x0F #define RFLR_OCP_TRIM_130_MA 0x10 #define RFLR_OCP_TRIM_140_MA 0x11 #define RFLR_OCP_TRIM_150_MA 0x12 #define RFLR_OCP_TRIM_160_MA 0x13 #define RFLR_OCP_TRIM_170_MA 0x14 #define RFLR_OCP_TRIM_180_MA 0x15 #define RFLR_OCP_TRIM_190_MA 0x16 #define RFLR_OCP_TRIM_200_MA 0x17 #define RFLR_OCP_TRIM_210_MA 0x18 #define RFLR_OCP_TRIM_220_MA 0x19 #define RFLR_OCP_TRIM_230_MA 0x1A #define RFLR_OCP_TRIM_240_MA 0x1B /*! * RegLna */ #define RFLR_LNA_GAIN_MASK 0x1F #define RFLR_LNA_GAIN_G1 0x20 // Default #define RFLR_LNA_GAIN_G2 0x40 #define RFLR_LNA_GAIN_G3 0x60 #define RFLR_LNA_GAIN_G4 0x80 #define RFLR_LNA_GAIN_G5 0xA0 #define RFLR_LNA_GAIN_G6 0xC0 #define RFLR_LNA_BOOST_LF_MASK 0xE7 #define RFLR_LNA_BOOST_LF_DEFAULT 0x00 // Default #define RFLR_LNA_BOOST_HF_MASK 0xFC #define RFLR_LNA_BOOST_HF_OFF 0x00 // Default #define RFLR_LNA_BOOST_HF_ON 0x03 /*! * RegFifoAddrPtr */ #define RFLR_FIFOADDRPTR 0x00 // Default /*! * RegFifoTxBaseAddr */ #define RFLR_FIFOTXBASEADDR 0x80 // Default /*! * RegFifoTxBaseAddr */ #define RFLR_FIFORXBASEADDR 0x00 // Default /*! * RegFifoRxCurrentAddr (Read Only) */ /*! * RegIrqFlagsMask */ #define RFLR_IRQFLAGS_RXTIMEOUT_MASK 0x80 #define RFLR_IRQFLAGS_RXDONE_MASK 0x40 #define RFLR_IRQFLAGS_PAYLOADCRCERROR_MASK 0x20 #define RFLR_IRQFLAGS_VALIDHEADER_MASK 0x10 #define RFLR_IRQFLAGS_TXDONE_MASK 0x08 #define RFLR_IRQFLAGS_CADDONE_MASK 0x04 #define RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL_MASK 0x02 #define RFLR_IRQFLAGS_CADDETECTED_MASK 0x01 /*! * RegIrqFlags */ #define RFLR_IRQFLAGS_RXTIMEOUT 0x80 #define RFLR_IRQFLAGS_RXDONE 0x40 #define RFLR_IRQFLAGS_PAYLOADCRCERROR 0x20 #define RFLR_IRQFLAGS_VALIDHEADER 0x10 #define RFLR_IRQFLAGS_TXDONE 0x08 #define RFLR_IRQFLAGS_CADDONE 0x04 #define RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL 0x02 #define RFLR_IRQFLAGS_CADDETECTED 0x01 /*! * RegFifoRxNbBytes (Read Only) */ /*! * RegRxHeaderCntValueMsb (Read Only) */ /*! * RegRxHeaderCntValueLsb (Read Only) */ /*! * RegRxPacketCntValueMsb (Read Only) */ /*! * RegRxPacketCntValueLsb (Read Only) */ /*! * RegModemStat (Read Only) */ #define RFLR_MODEMSTAT_RX_CR_MASK 0x1F #define RFLR_MODEMSTAT_MODEM_STATUS_MASK 0xE0 /*! * RegPktSnrValue (Read Only) */ /*! * RegPktRssiValue (Read Only) */ /*! * RegRssiValue (Read Only) */ /*! * RegHopChannel (Read Only) */ #define RFLR_HOPCHANNEL_PLL_LOCK_TIMEOUT_MASK 0x7F #define RFLR_HOPCHANNEL_PLL_LOCK_FAIL 0x80 #define RFLR_HOPCHANNEL_PLL_LOCK_SUCCEED 0x00 // Default #define RFLR_HOPCHANNEL_CRCONPAYLOAD_MASK 0xBF #define RFLR_HOPCHANNEL_CRCONPAYLOAD_ON 0x40 #define RFLR_HOPCHANNEL_CRCONPAYLOAD_OFF 0x00 // Default #define RFLR_HOPCHANNEL_CHANNEL_MASK 0x3F /*! * RegModemConfig1 */ #define RFLR_MODEMCONFIG1_BW_MASK 0x0F #define RFLR_MODEMCONFIG1_BW_7_81_KHZ 0x00 #define RFLR_MODEMCONFIG1_BW_10_41_KHZ 0x10 #define RFLR_MODEMCONFIG1_BW_15_62_KHZ 0x20 #define RFLR_MODEMCONFIG1_BW_20_83_KHZ 0x30 #define RFLR_MODEMCONFIG1_BW_31_25_KHZ 0x40 #define RFLR_MODEMCONFIG1_BW_41_66_KHZ 0x50 #define RFLR_MODEMCONFIG1_BW_62_50_KHZ 0x60 #define RFLR_MODEMCONFIG1_BW_125_KHZ 0x70 // Default #define RFLR_MODEMCONFIG1_BW_250_KHZ 0x80 #define RFLR_MODEMCONFIG1_BW_500_KHZ 0x90 #define RFLR_MODEMCONFIG1_CODINGRATE_MASK 0xF1 #define RFLR_MODEMCONFIG1_CODINGRATE_4_5 0x02 #define RFLR_MODEMCONFIG1_CODINGRATE_4_6 0x04 // Default #define RFLR_MODEMCONFIG1_CODINGRATE_4_7 0x06 #define RFLR_MODEMCONFIG1_CODINGRATE_4_8 0x08 #define RFLR_MODEMCONFIG1_IMPLICITHEADER_MASK 0xFE #define RFLR_MODEMCONFIG1_IMPLICITHEADER_ON 0x01 #define RFLR_MODEMCONFIG1_IMPLICITHEADER_OFF 0x00 // Default /*! * RegModemConfig2 */ #define RFLR_MODEMCONFIG2_SF_MASK 0x0F #define RFLR_MODEMCONFIG2_SF_6 0x60 #define RFLR_MODEMCONFIG2_SF_7 0x70 // Default #define RFLR_MODEMCONFIG2_SF_8 0x80 #define RFLR_MODEMCONFIG2_SF_9 0x90 #define RFLR_MODEMCONFIG2_SF_10 0xA0 #define RFLR_MODEMCONFIG2_SF_11 0xB0 #define RFLR_MODEMCONFIG2_SF_12 0xC0 #define RFLR_MODEMCONFIG2_TXCONTINUOUSMODE_MASK 0xF7 #define RFLR_MODEMCONFIG2_TXCONTINUOUSMODE_ON 0x08 #define RFLR_MODEMCONFIG2_TXCONTINUOUSMODE_OFF 0x00 #define RFLR_MODEMCONFIG2_RXPAYLOADCRC_MASK 0xFB #define RFLR_MODEMCONFIG2_RXPAYLOADCRC_ON 0x04 #define RFLR_MODEMCONFIG2_RXPAYLOADCRC_OFF 0x00 // Default #define RFLR_MODEMCONFIG2_SYMBTIMEOUTMSB_MASK 0xFC #define RFLR_MODEMCONFIG2_SYMBTIMEOUTMSB 0x00 // Default /*! * RegSymbTimeoutLsb */ #define RFLR_SYMBTIMEOUTLSB_SYMBTIMEOUT 0x64 // Default /*! * RegPreambleLengthMsb */ #define RFLR_PREAMBLELENGTHMSB 0x00 // Default /*! * RegPreambleLengthLsb */ #define RFLR_PREAMBLELENGTHLSB 0x08 // Default /*! * RegPayloadLength */ #define RFLR_PAYLOADLENGTH 0x0E // Default /*! * RegPayloadMaxLength */ #define RFLR_PAYLOADMAXLENGTH 0xFF // Default /*! * RegHopPeriod */ #define RFLR_HOPPERIOD_FREQFOPPINGPERIOD 0x00 // Default /*! * RegFifoRxByteAddr (Read Only) */ /*! * RegModemConfig3 */ #define RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_MASK 0xF7 #define RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_ON 0x08 #define RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_OFF 0x00 // Default #define RFLR_MODEMCONFIG3_AGCAUTO_MASK 0xFB #define RFLR_MODEMCONFIG3_AGCAUTO_ON 0x04 // Default #define RFLR_MODEMCONFIG3_AGCAUTO_OFF 0x00 /*! * RegFeiMsb (Read Only) */ /*! * RegFeiMid (Read Only) */ /*! * RegFeiLsb (Read Only) */ /*! * RegRssiWideband (Read Only) */ /*! * RegDetectOptimize */ #define RFLR_DETECTIONOPTIMIZE_MASK 0xF8 #define RFLR_DETECTIONOPTIMIZE_SF7_TO_SF12 0x03 // Default #define RFLR_DETECTIONOPTIMIZE_SF6 0x05 /*! * RegInvertIQ */ #define RFLR_INVERTIQ_RX_MASK 0xBF #define RFLR_INVERTIQ_RX_OFF 0x00 #define RFLR_INVERTIQ_RX_ON 0x40 #define RFLR_INVERTIQ_TX_MASK 0xFE #define RFLR_INVERTIQ_TX_OFF 0x01 #define RFLR_INVERTIQ_TX_ON 0x00 /*! * RegDetectionThreshold */ #define RFLR_DETECTIONTHRESH_SF7_TO_SF12 0x0A // Default #define RFLR_DETECTIONTHRESH_SF6 0x0C /*! * RegInvertIQ2 */ #define RFLR_INVERTIQ2_ON 0x19 #define RFLR_INVERTIQ2_OFF 0x1D /*! * RegDioMapping1 */ #define RFLR_DIOMAPPING1_DIO0_MASK 0x3F #define RFLR_DIOMAPPING1_DIO0_00 0x00 // Default #define RFLR_DIOMAPPING1_DIO0_01 0x40 #define RFLR_DIOMAPPING1_DIO0_10 0x80 #define RFLR_DIOMAPPING1_DIO0_11 0xC0 #define RFLR_DIOMAPPING1_DIO1_MASK 0xCF #define RFLR_DIOMAPPING1_DIO1_00 0x00 // Default #define RFLR_DIOMAPPING1_DIO1_01 0x10 #define RFLR_DIOMAPPING1_DIO1_10 0x20 #define RFLR_DIOMAPPING1_DIO1_11 0x30 #define RFLR_DIOMAPPING1_DIO2_MASK 0xF3 #define RFLR_DIOMAPPING1_DIO2_00 0x00 // Default #define RFLR_DIOMAPPING1_DIO2_01 0x04 #define RFLR_DIOMAPPING1_DIO2_10 0x08 #define RFLR_DIOMAPPING1_DIO2_11 0x0C #define RFLR_DIOMAPPING1_DIO3_MASK 0xFC #define RFLR_DIOMAPPING1_DIO3_00 0x00 // Default #define RFLR_DIOMAPPING1_DIO3_01 0x01 #define RFLR_DIOMAPPING1_DIO3_10 0x02 #define RFLR_DIOMAPPING1_DIO3_11 0x03 /*! * RegDioMapping2 */ #define RFLR_DIOMAPPING2_DIO4_MASK 0x3F #define RFLR_DIOMAPPING2_DIO4_00 0x00 // Default #define RFLR_DIOMAPPING2_DIO4_01 0x40 #define RFLR_DIOMAPPING2_DIO4_10 0x80 #define RFLR_DIOMAPPING2_DIO4_11 0xC0 #define RFLR_DIOMAPPING2_DIO5_MASK 0xCF #define RFLR_DIOMAPPING2_DIO5_00 0x00 // Default #define RFLR_DIOMAPPING2_DIO5_01 0x10 #define RFLR_DIOMAPPING2_DIO5_10 0x20 #define RFLR_DIOMAPPING2_DIO5_11 0x30 #define RFLR_DIOMAPPING2_MAP_MASK 0xFE #define RFLR_DIOMAPPING2_MAP_PREAMBLEDETECT 0x01 #define RFLR_DIOMAPPING2_MAP_RSSI 0x00 // Default /*! * RegVersion (Read Only) */ /*! * RegPllHop */ #define RFLR_PLLHOP_FASTHOP_MASK 0x7F #define RFLR_PLLHOP_FASTHOP_ON 0x80 #define RFLR_PLLHOP_FASTHOP_OFF 0x00 // Default /*! * RegTcxo */ #define RFLR_TCXO_TCXOINPUT_MASK 0xEF #define RFLR_TCXO_TCXOINPUT_ON 0x10 #define RFLR_TCXO_TCXOINPUT_OFF 0x00 // Default /*! * RegPaDac */ #define RFLR_PADAC_20DBM_MASK 0xF8 #define RFLR_PADAC_20DBM_ON 0x07 #define RFLR_PADAC_20DBM_OFF 0x04 // Default /*! * RegFormerTemp */ /*! * RegBitrateFrac */ #define RF_BITRATEFRAC_MASK 0xF0 /*! * RegAgcRef */ /*! * RegAgcThresh1 */ /*! * RegAgcThresh2 */ /*! * RegAgcThresh3 */ /*! * RegPll */ #define RF_PLL_BANDWIDTH_MASK 0x3F #define RF_PLL_BANDWIDTH_75 0x00 #define RF_PLL_BANDWIDTH_150 0x40 #define RF_PLL_BANDWIDTH_225 0x80 #define RF_PLL_BANDWIDTH_300 0xC0 // Default #endif // __SX1276_REGS_LORA_H__