Diff: mbed-lora-radio-drv/SX1276/registers/sx1276Regs-LoRa.h

Revision:

0:7bfeb237e600

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-lora-radio-drv/SX1276/registers/sx1276Regs-LoRa.h	Fri Mar 08 11:34:56 2019 +0000
@@ -0,0 +1,569 @@
+/**
+ / _____)             _              | |
+( (____  _____ ____ _| |_ _____  ____| |__
+ \____ \| ___ |    (_   _) ___ |/ ___)  _ \
+ _____) ) ____| | | || |_| ____( (___| | | |
+(______/|_____)_|_|_| \__)_____)\____)_| |_|
+    (C) 2014 Semtech
+
+Description: SX1276 LoRa modem registers and bits definitions
+
+License: Revised BSD License, see LICENSE.TXT file include in the project
+
+Maintainer: Miguel Luis and Gregory Cristian
+
+Copyright (c) 2017, Arm Limited and affiliates.
+
+SPDX-License-Identifier: BSD-3-Clause
+*/
+#ifndef __SX1276_REGS_LORA_H__
+#define __SX1276_REGS_LORA_H__
+
+/*!
+ * ============================================================================
+ * SX1276 Internal registers Address
+ * ============================================================================
+ */
+#define REG_LR_FIFO                                 0x00
+// Common settings
+#define REG_LR_OPMODE                               0x01
+#define REG_LR_FRFMSB                               0x06
+#define REG_LR_FRFMID                               0x07
+#define REG_LR_FRFLSB                               0x08
+// Tx settings
+#define REG_LR_PACONFIG                             0x09
+#define REG_LR_PARAMP                               0x0A
+#define REG_LR_OCP                                  0x0B
+// Rx settings
+#define REG_LR_LNA                                  0x0C
+// LoRa registers
+#define REG_LR_FIFOADDRPTR                          0x0D
+#define REG_LR_FIFOTXBASEADDR                       0x0E
+#define REG_LR_FIFORXBASEADDR                       0x0F
+#define REG_LR_FIFORXCURRENTADDR                    0x10
+#define REG_LR_IRQFLAGSMASK                         0x11
+#define REG_LR_IRQFLAGS                             0x12
+#define REG_LR_RXNBBYTES                            0x13
+#define REG_LR_RXHEADERCNTVALUEMSB                  0x14
+#define REG_LR_RXHEADERCNTVALUELSB                  0x15
+#define REG_LR_RXPACKETCNTVALUEMSB                  0x16
+#define REG_LR_RXPACKETCNTVALUELSB                  0x17
+#define REG_LR_MODEMSTAT                            0x18
+#define REG_LR_PKTSNRVALUE                          0x19
+#define REG_LR_PKTRSSIVALUE                         0x1A
+#define REG_LR_RSSIVALUE                            0x1B
+#define REG_LR_HOPCHANNEL                           0x1C
+#define REG_LR_MODEMCONFIG1                         0x1D
+#define REG_LR_MODEMCONFIG2                         0x1E
+#define REG_LR_SYMBTIMEOUTLSB                       0x1F
+#define REG_LR_PREAMBLEMSB                          0x20
+#define REG_LR_PREAMBLELSB                          0x21
+#define REG_LR_PAYLOADLENGTH                        0x22
+#define REG_LR_PAYLOADMAXLENGTH                     0x23
+#define REG_LR_HOPPERIOD                            0x24
+#define REG_LR_FIFORXBYTEADDR                       0x25
+#define REG_LR_MODEMCONFIG3                         0x26
+#define REG_LR_FEIMSB                               0x28
+#define REG_LR_FEIMID                               0x29
+#define REG_LR_FEILSB                               0x2A
+#define REG_LR_RSSIWIDEBAND                         0x2C
+#define REG_LR_TEST2F                               0x2F
+#define REG_LR_TEST30                               0x30
+#define REG_LR_DETECTOPTIMIZE                       0x31
+#define REG_LR_INVERTIQ                             0x33
+#define REG_LR_TEST36                               0x36
+#define REG_LR_DETECTIONTHRESHOLD                   0x37
+#define REG_LR_SYNCWORD                             0x39
+#define REG_LR_TEST3A                               0x3A
+#define REG_LR_INVERTIQ2                            0x3B
+
+// end of documented register in datasheet
+// I/O settings
+#define REG_LR_DIOMAPPING1                          0x40
+#define REG_LR_DIOMAPPING2                          0x41
+// Version
+#define REG_LR_VERSION                              0x42
+// Additional settings
+#define REG_LR_PLLHOP                               0x44
+#define REG_LR_TCXO                                 0x4B
+#define REG_LR_PADAC                                0x4D
+#define REG_LR_FORMERTEMP                           0x5B
+#define REG_LR_BITRATEFRAC                          0x5D
+#define REG_LR_AGCREF                               0x61
+#define REG_LR_AGCTHRESH1                           0x62
+#define REG_LR_AGCTHRESH2                           0x63
+#define REG_LR_AGCTHRESH3                           0x64
+#define REG_LR_PLL                                  0x70
+
+/*!
+ * ============================================================================
+ * SX1276 LoRa bits control definition
+ * ============================================================================
+ */
+
+/*!
+ * RegFifo
+ */
+
+/*!
+ * RegOpMode
+ */
+#define RFLR_OPMODE_LONGRANGEMODE_MASK              0x7F
+#define RFLR_OPMODE_LONGRANGEMODE_OFF               0x00 // Default
+#define RFLR_OPMODE_LONGRANGEMODE_ON                0x80
+
+#define RFLR_OPMODE_ACCESSSHAREDREG_MASK            0xBF
+#define RFLR_OPMODE_ACCESSSHAREDREG_ENABLE          0x40
+#define RFLR_OPMODE_ACCESSSHAREDREG_DISABLE         0x00 // Default
+
+#define RFLR_OPMODE_FREQMODE_ACCESS_MASK            0xF7
+#define RFLR_OPMODE_FREQMODE_ACCESS_LF              0x08 // Default
+#define RFLR_OPMODE_FREQMODE_ACCESS_HF              0x00
+
+#define RFLR_OPMODE_MASK                            0xF8
+#define RFLR_OPMODE_SLEEP                           0x00
+#define RFLR_OPMODE_STANDBY                         0x01 // Default
+#define RFLR_OPMODE_SYNTHESIZER_TX                  0x02
+#define RFLR_OPMODE_TRANSMITTER                     0x03
+#define RFLR_OPMODE_SYNTHESIZER_RX                  0x04
+#define RFLR_OPMODE_RECEIVER                        0x05
+// LoRa specific modes
+#define RFLR_OPMODE_RECEIVER_SINGLE                 0x06
+#define RFLR_OPMODE_CAD                             0x07
+
+/*!
+ * RegFrf (MHz)
+ */
+#define RFLR_FRFMSB_434_MHZ                         0x6C // Default
+#define RFLR_FRFMID_434_MHZ                         0x80 // Default
+#define RFLR_FRFLSB_434_MHZ                         0x00 // Default
+
+/*!
+ * RegPaConfig
+ */
+#define RFLR_PACONFIG_PASELECT_MASK                 0x7F
+#define RFLR_PACONFIG_PASELECT_PABOOST              0x80
+#define RFLR_PACONFIG_PASELECT_RFO                  0x00 // Default
+
+#define RFLR_PACONFIG_MAX_POWER_MASK                0x8F
+
+#define RFLR_PACONFIG_OUTPUTPOWER_MASK              0xF0
+
+/*!
+ * RegPaRamp
+ */
+#define RFLR_PARAMP_TXBANDFORCE_MASK                0xEF
+#define RFLR_PARAMP_TXBANDFORCE_BAND_SEL            0x10
+#define RFLR_PARAMP_TXBANDFORCE_AUTO                0x00 // Default
+
+#define RFLR_PARAMP_MASK                            0xF0
+#define RFLR_PARAMP_3400_US                         0x00
+#define RFLR_PARAMP_2000_US                         0x01
+#define RFLR_PARAMP_1000_US                         0x02
+#define RFLR_PARAMP_0500_US                         0x03
+#define RFLR_PARAMP_0250_US                         0x04
+#define RFLR_PARAMP_0125_US                         0x05
+#define RFLR_PARAMP_0100_US                         0x06
+#define RFLR_PARAMP_0062_US                         0x07
+#define RFLR_PARAMP_0050_US                         0x08
+#define RFLR_PARAMP_0040_US                         0x09 // Default
+#define RFLR_PARAMP_0031_US                         0x0A
+#define RFLR_PARAMP_0025_US                         0x0B
+#define RFLR_PARAMP_0020_US                         0x0C
+#define RFLR_PARAMP_0015_US                         0x0D
+#define RFLR_PARAMP_0012_US                         0x0E
+#define RFLR_PARAMP_0010_US                         0x0F
+
+/*!
+ * RegOcp
+ */
+#define RFLR_OCP_MASK                               0xDF
+#define RFLR_OCP_ON                                 0x20 // Default
+#define RFLR_OCP_OFF                                0x00
+
+#define RFLR_OCP_TRIM_MASK                          0xE0
+#define RFLR_OCP_TRIM_045_MA                        0x00
+#define RFLR_OCP_TRIM_050_MA                        0x01
+#define RFLR_OCP_TRIM_055_MA                        0x02
+#define RFLR_OCP_TRIM_060_MA                        0x03
+#define RFLR_OCP_TRIM_065_MA                        0x04
+#define RFLR_OCP_TRIM_070_MA                        0x05
+#define RFLR_OCP_TRIM_075_MA                        0x06
+#define RFLR_OCP_TRIM_080_MA                        0x07
+#define RFLR_OCP_TRIM_085_MA                        0x08
+#define RFLR_OCP_TRIM_090_MA                        0x09
+#define RFLR_OCP_TRIM_095_MA                        0x0A
+#define RFLR_OCP_TRIM_100_MA                        0x0B  // Default
+#define RFLR_OCP_TRIM_105_MA                        0x0C
+#define RFLR_OCP_TRIM_110_MA                        0x0D
+#define RFLR_OCP_TRIM_115_MA                        0x0E
+#define RFLR_OCP_TRIM_120_MA                        0x0F
+#define RFLR_OCP_TRIM_130_MA                        0x10
+#define RFLR_OCP_TRIM_140_MA                        0x11
+#define RFLR_OCP_TRIM_150_MA                        0x12
+#define RFLR_OCP_TRIM_160_MA                        0x13
+#define RFLR_OCP_TRIM_170_MA                        0x14
+#define RFLR_OCP_TRIM_180_MA                        0x15
+#define RFLR_OCP_TRIM_190_MA                        0x16
+#define RFLR_OCP_TRIM_200_MA                        0x17
+#define RFLR_OCP_TRIM_210_MA                        0x18
+#define RFLR_OCP_TRIM_220_MA                        0x19
+#define RFLR_OCP_TRIM_230_MA                        0x1A
+#define RFLR_OCP_TRIM_240_MA                        0x1B
+
+/*!
+ * RegLna
+ */
+#define RFLR_LNA_GAIN_MASK                          0x1F
+#define RFLR_LNA_GAIN_G1                            0x20 // Default
+#define RFLR_LNA_GAIN_G2                            0x40
+#define RFLR_LNA_GAIN_G3                            0x60
+#define RFLR_LNA_GAIN_G4                            0x80
+#define RFLR_LNA_GAIN_G5                            0xA0
+#define RFLR_LNA_GAIN_G6                            0xC0
+
+#define RFLR_LNA_BOOST_LF_MASK                      0xE7
+#define RFLR_LNA_BOOST_LF_DEFAULT                   0x00 // Default
+
+#define RFLR_LNA_BOOST_HF_MASK                      0xFC
+#define RFLR_LNA_BOOST_HF_OFF                       0x00 // Default
+#define RFLR_LNA_BOOST_HF_ON                        0x03
+
+/*!
+ * RegFifoAddrPtr
+ */
+#define RFLR_FIFOADDRPTR                            0x00 // Default
+
+/*!
+ * RegFifoTxBaseAddr
+ */
+#define RFLR_FIFOTXBASEADDR                         0x80 // Default
+
+/*!
+ * RegFifoTxBaseAddr
+ */
+#define RFLR_FIFORXBASEADDR                         0x00 // Default
+
+/*!
+ * RegFifoRxCurrentAddr (Read Only)
+ */
+
+/*!
+ * RegIrqFlagsMask
+ */
+#define RFLR_IRQFLAGS_RXTIMEOUT_MASK                0x80
+#define RFLR_IRQFLAGS_RXDONE_MASK                   0x40
+#define RFLR_IRQFLAGS_PAYLOADCRCERROR_MASK          0x20
+#define RFLR_IRQFLAGS_VALIDHEADER_MASK              0x10
+#define RFLR_IRQFLAGS_TXDONE_MASK                   0x08
+#define RFLR_IRQFLAGS_CADDONE_MASK                  0x04
+#define RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL_MASK       0x02
+#define RFLR_IRQFLAGS_CADDETECTED_MASK              0x01
+
+/*!
+ * RegIrqFlags
+ */
+#define RFLR_IRQFLAGS_RXTIMEOUT                     0x80
+#define RFLR_IRQFLAGS_RXDONE                        0x40
+#define RFLR_IRQFLAGS_PAYLOADCRCERROR               0x20
+#define RFLR_IRQFLAGS_VALIDHEADER                   0x10
+#define RFLR_IRQFLAGS_TXDONE                        0x08
+#define RFLR_IRQFLAGS_CADDONE                       0x04
+#define RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL            0x02
+#define RFLR_IRQFLAGS_CADDETECTED                   0x01
+
+/*!
+ * RegFifoRxNbBytes (Read Only)
+ */
+
+/*!
+ * RegRxHeaderCntValueMsb (Read Only)
+ */
+
+/*!
+ * RegRxHeaderCntValueLsb (Read Only)
+ */
+
+/*!
+ * RegRxPacketCntValueMsb (Read Only)
+ */
+
+/*!
+ * RegRxPacketCntValueLsb (Read Only)
+ */
+
+/*!
+ * RegModemStat (Read Only)
+ */
+#define RFLR_MODEMSTAT_RX_CR_MASK                   0x1F
+#define RFLR_MODEMSTAT_MODEM_STATUS_MASK            0xE0
+
+/*!
+ * RegPktSnrValue (Read Only)
+ */
+
+/*!
+ * RegPktRssiValue (Read Only)
+ */
+
+/*!
+ * RegRssiValue (Read Only)
+ */
+
+/*!
+ * RegHopChannel (Read Only)
+ */
+#define RFLR_HOPCHANNEL_PLL_LOCK_TIMEOUT_MASK       0x7F
+#define RFLR_HOPCHANNEL_PLL_LOCK_FAIL               0x80
+#define RFLR_HOPCHANNEL_PLL_LOCK_SUCCEED            0x00 // Default
+
+#define RFLR_HOPCHANNEL_CRCONPAYLOAD_MASK           0xBF
+#define RFLR_HOPCHANNEL_CRCONPAYLOAD_ON             0x40
+#define RFLR_HOPCHANNEL_CRCONPAYLOAD_OFF            0x00 // Default
+
+#define RFLR_HOPCHANNEL_CHANNEL_MASK                0x3F
+
+/*!
+ * RegModemConfig1
+ */
+#define RFLR_MODEMCONFIG1_BW_MASK                   0x0F
+#define RFLR_MODEMCONFIG1_BW_7_81_KHZ               0x00
+#define RFLR_MODEMCONFIG1_BW_10_41_KHZ              0x10
+#define RFLR_MODEMCONFIG1_BW_15_62_KHZ              0x20
+#define RFLR_MODEMCONFIG1_BW_20_83_KHZ              0x30
+#define RFLR_MODEMCONFIG1_BW_31_25_KHZ              0x40
+#define RFLR_MODEMCONFIG1_BW_41_66_KHZ              0x50
+#define RFLR_MODEMCONFIG1_BW_62_50_KHZ              0x60
+#define RFLR_MODEMCONFIG1_BW_125_KHZ                0x70 // Default
+#define RFLR_MODEMCONFIG1_BW_250_KHZ                0x80
+#define RFLR_MODEMCONFIG1_BW_500_KHZ                0x90
+
+#define RFLR_MODEMCONFIG1_CODINGRATE_MASK           0xF1
+#define RFLR_MODEMCONFIG1_CODINGRATE_4_5            0x02
+#define RFLR_MODEMCONFIG1_CODINGRATE_4_6            0x04 // Default
+#define RFLR_MODEMCONFIG1_CODINGRATE_4_7            0x06
+#define RFLR_MODEMCONFIG1_CODINGRATE_4_8            0x08
+
+#define RFLR_MODEMCONFIG1_IMPLICITHEADER_MASK       0xFE
+#define RFLR_MODEMCONFIG1_IMPLICITHEADER_ON         0x01
+#define RFLR_MODEMCONFIG1_IMPLICITHEADER_OFF        0x00 // Default
+
+/*!
+ * RegModemConfig2
+ */
+#define RFLR_MODEMCONFIG2_SF_MASK                   0x0F
+#define RFLR_MODEMCONFIG2_SF_6                      0x60
+#define RFLR_MODEMCONFIG2_SF_7                      0x70 // Default
+#define RFLR_MODEMCONFIG2_SF_8                      0x80
+#define RFLR_MODEMCONFIG2_SF_9                      0x90
+#define RFLR_MODEMCONFIG2_SF_10                     0xA0
+#define RFLR_MODEMCONFIG2_SF_11                     0xB0
+#define RFLR_MODEMCONFIG2_SF_12                     0xC0
+
+#define RFLR_MODEMCONFIG2_TXCONTINUOUSMODE_MASK     0xF7
+#define RFLR_MODEMCONFIG2_TXCONTINUOUSMODE_ON       0x08
+#define RFLR_MODEMCONFIG2_TXCONTINUOUSMODE_OFF      0x00
+
+#define RFLR_MODEMCONFIG2_RXPAYLOADCRC_MASK         0xFB
+#define RFLR_MODEMCONFIG2_RXPAYLOADCRC_ON           0x04
+#define RFLR_MODEMCONFIG2_RXPAYLOADCRC_OFF          0x00 // Default
+
+#define RFLR_MODEMCONFIG2_SYMBTIMEOUTMSB_MASK       0xFC
+#define RFLR_MODEMCONFIG2_SYMBTIMEOUTMSB            0x00 // Default
+
+/*!
+ * RegSymbTimeoutLsb
+ */
+#define RFLR_SYMBTIMEOUTLSB_SYMBTIMEOUT             0x64 // Default
+
+/*!
+ * RegPreambleLengthMsb
+ */
+#define RFLR_PREAMBLELENGTHMSB                      0x00 // Default
+
+/*!
+ * RegPreambleLengthLsb
+ */
+#define RFLR_PREAMBLELENGTHLSB                      0x08 // Default
+
+/*!
+ * RegPayloadLength
+ */
+#define RFLR_PAYLOADLENGTH                          0x0E // Default
+
+/*!
+ * RegPayloadMaxLength
+ */
+#define RFLR_PAYLOADMAXLENGTH                       0xFF // Default
+
+/*!
+ * RegHopPeriod
+ */
+#define RFLR_HOPPERIOD_FREQFOPPINGPERIOD            0x00 // Default
+
+/*!
+ * RegFifoRxByteAddr (Read Only)
+ */
+
+/*!
+ * RegModemConfig3
+ */
+#define RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_MASK  0xF7
+#define RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_ON    0x08
+#define RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_OFF   0x00 // Default
+
+#define RFLR_MODEMCONFIG3_AGCAUTO_MASK              0xFB
+#define RFLR_MODEMCONFIG3_AGCAUTO_ON                0x04 // Default
+#define RFLR_MODEMCONFIG3_AGCAUTO_OFF               0x00
+
+/*!
+ * RegFeiMsb (Read Only)
+ */
+
+/*!
+ * RegFeiMid (Read Only)
+ */
+
+/*!
+ * RegFeiLsb (Read Only)
+ */
+
+/*!
+ * RegRssiWideband (Read Only)
+ */
+
+/*!
+ * RegDetectOptimize
+ */
+#define RFLR_DETECTIONOPTIMIZE_MASK                 0xF8
+#define RFLR_DETECTIONOPTIMIZE_SF7_TO_SF12          0x03 // Default
+#define RFLR_DETECTIONOPTIMIZE_SF6                  0x05
+
+/*!
+ * RegInvertIQ
+ */
+#define RFLR_INVERTIQ_RX_MASK                       0xBF
+#define RFLR_INVERTIQ_RX_OFF                        0x00
+#define RFLR_INVERTIQ_RX_ON                         0x40
+#define RFLR_INVERTIQ_TX_MASK                       0xFE
+#define RFLR_INVERTIQ_TX_OFF                        0x01
+#define RFLR_INVERTIQ_TX_ON                         0x00
+
+/*!
+ * RegDetectionThreshold
+ */
+#define RFLR_DETECTIONTHRESH_SF7_TO_SF12            0x0A // Default
+#define RFLR_DETECTIONTHRESH_SF6                    0x0C
+
+/*!
+ * RegInvertIQ2
+ */
+#define RFLR_INVERTIQ2_ON                           0x19
+#define RFLR_INVERTIQ2_OFF                          0x1D
+
+/*!
+ * RegDioMapping1
+ */
+#define RFLR_DIOMAPPING1_DIO0_MASK                  0x3F
+#define RFLR_DIOMAPPING1_DIO0_00                    0x00  // Default
+#define RFLR_DIOMAPPING1_DIO0_01                    0x40
+#define RFLR_DIOMAPPING1_DIO0_10                    0x80
+#define RFLR_DIOMAPPING1_DIO0_11                    0xC0
+
+#define RFLR_DIOMAPPING1_DIO1_MASK                  0xCF
+#define RFLR_DIOMAPPING1_DIO1_00                    0x00  // Default
+#define RFLR_DIOMAPPING1_DIO1_01                    0x10
+#define RFLR_DIOMAPPING1_DIO1_10                    0x20
+#define RFLR_DIOMAPPING1_DIO1_11                    0x30
+
+#define RFLR_DIOMAPPING1_DIO2_MASK                  0xF3
+#define RFLR_DIOMAPPING1_DIO2_00                    0x00  // Default
+#define RFLR_DIOMAPPING1_DIO2_01                    0x04
+#define RFLR_DIOMAPPING1_DIO2_10                    0x08
+#define RFLR_DIOMAPPING1_DIO2_11                    0x0C
+
+#define RFLR_DIOMAPPING1_DIO3_MASK                  0xFC
+#define RFLR_DIOMAPPING1_DIO3_00                    0x00  // Default
+#define RFLR_DIOMAPPING1_DIO3_01                    0x01
+#define RFLR_DIOMAPPING1_DIO3_10                    0x02
+#define RFLR_DIOMAPPING1_DIO3_11                    0x03
+
+/*!
+ * RegDioMapping2
+ */
+#define RFLR_DIOMAPPING2_DIO4_MASK                  0x3F
+#define RFLR_DIOMAPPING2_DIO4_00                    0x00  // Default
+#define RFLR_DIOMAPPING2_DIO4_01                    0x40
+#define RFLR_DIOMAPPING2_DIO4_10                    0x80
+#define RFLR_DIOMAPPING2_DIO4_11                    0xC0
+
+#define RFLR_DIOMAPPING2_DIO5_MASK                  0xCF
+#define RFLR_DIOMAPPING2_DIO5_00                    0x00  // Default
+#define RFLR_DIOMAPPING2_DIO5_01                    0x10
+#define RFLR_DIOMAPPING2_DIO5_10                    0x20
+#define RFLR_DIOMAPPING2_DIO5_11                    0x30
+
+#define RFLR_DIOMAPPING2_MAP_MASK                   0xFE
+#define RFLR_DIOMAPPING2_MAP_PREAMBLEDETECT         0x01
+#define RFLR_DIOMAPPING2_MAP_RSSI                   0x00  // Default
+
+/*!
+ * RegVersion (Read Only)
+ */
+
+/*!
+ * RegPllHop
+ */
+#define RFLR_PLLHOP_FASTHOP_MASK                    0x7F
+#define RFLR_PLLHOP_FASTHOP_ON                      0x80
+#define RFLR_PLLHOP_FASTHOP_OFF                     0x00 // Default
+
+/*!
+ * RegTcxo
+ */
+#define RFLR_TCXO_TCXOINPUT_MASK                    0xEF
+#define RFLR_TCXO_TCXOINPUT_ON                      0x10
+#define RFLR_TCXO_TCXOINPUT_OFF                     0x00  // Default
+
+/*!
+ * RegPaDac
+ */
+#define RFLR_PADAC_20DBM_MASK                       0xF8
+#define RFLR_PADAC_20DBM_ON                         0x07
+#define RFLR_PADAC_20DBM_OFF                        0x04  // Default
+
+/*!
+ * RegFormerTemp
+ */
+
+/*!
+ * RegBitrateFrac
+ */
+#define RF_BITRATEFRAC_MASK                         0xF0
+
+/*!
+ * RegAgcRef
+ */
+
+/*!
+ * RegAgcThresh1
+ */
+
+/*!
+ * RegAgcThresh2
+ */
+
+/*!
+ * RegAgcThresh3
+ */
+
+/*!
+ * RegPll
+ */
+#define RF_PLL_BANDWIDTH_MASK                       0x3F
+#define RF_PLL_BANDWIDTH_75                         0x00
+#define RF_PLL_BANDWIDTH_150                        0x40
+#define RF_PLL_BANDWIDTH_225                        0x80
+#define RF_PLL_BANDWIDTH_300                        0xC0  // Default
+
+#endif // __SX1276_REGS_LORA_H__