Hervé DELACOURT
adaptation for bkap
Fork of
X_NUCLEO_IDB0XA1
by 
ST
Diff: source/BlueNRGGap.cpp
- Branch:
- 9bb31e3d89ab51aca24fe8b1162853fbc70fe791
- Revision:
- 270:ca649990a830
- Parent:
- 268:c0a1e03c5736
- Child:
- 272:4639da7705e1
--- a/source/BlueNRGGap.cpp Thu Sep 15 10:51:31 2016 +0100
+++ b/source/BlueNRGGap.cpp Thu Sep 15 10:51:32 2016 +0100
@@ -44,10 +44,6 @@
#include "Utils.h"
#include "debug.h"
-//Local Variables
-//const char *local_name = NULL;
-//uint8_t local_name_length = 0;
-
/*
* Utility to process GAP specific events (e.g., Advertising timeout)
*/
@@ -103,18 +99,8 @@
return BLE_ERROR_BUFFER_OVERFLOW;
}
- // Reset the length of the ADV payload each time
- // since we get fields of argument 'advData' iteratively
- AdvLen = 0;
-
/* Make sure we have a payload! */
- if (advData.getPayloadLen() == 0) {
- PRINTF("advData.getPayloadLen() == 0\n\r");
- //return BLE_ERROR_PARAM_OUT_OF_RANGE;
- local_name_length = 0;
- txPowLevSet = 0;
- servUuidlength = 0;
- } else {
+ if (advData.getPayloadLen() != 0) {
PayloadPtr loadPtr(advData.getPayload(), advData.getPayloadLen());
/* Align the GAP Service Appearance Char value coherently
@@ -132,79 +118,8 @@
PRINTF("adData[%d].AdType=0x%x\n\r", index,(uint8_t)(*loadPtr.getUnitAtIndex(index).getAdTypePtr()));
switch(*loadPtr.getUnitAtIndex(index).getAdTypePtr()) {
- case GapAdvertisingData::FLAGS: /* ref *Flags */
- {
- PRINTF("Advertising type: FLAGS\n\r");
- //Check if Flags are OK. BlueNRG only supports LE Mode.
- uint8_t *flags = loadPtr.getUnitAtIndex(index).getDataPtr();
- if((*flags & GapAdvertisingData::BREDR_NOT_SUPPORTED) != GapAdvertisingData::BREDR_NOT_SUPPORTED) {
- PRINTF("BlueNRG does not support BR/EDR Mode");
- return BLE_ERROR_PARAM_OUT_OF_RANGE;
- }
-
- break;
- }
- case GapAdvertisingData::INCOMPLETE_LIST_16BIT_SERVICE_IDS: /**< Incomplete list of 16-bit Service IDs */
- case GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS: /**< Complete list of 16-bit Service IDs */
- case GapAdvertisingData::INCOMPLETE_LIST_128BIT_SERVICE_IDS: /**< Incomplete list of 128-bit Service IDs */
- case GapAdvertisingData::COMPLETE_LIST_128BIT_SERVICE_IDS: /**< Complete list of 128-bit Service IDs */
- {
- PRINTF("Advertising type: INCOMPLETE_LIST SERVICE_IDS/COMPLETE_LIST SERVICE_IDS\n\r");
-
- uint8_t buffSize = *loadPtr.getUnitAtIndex(index).getLenPtr()-1;
- // The total lenght should include the Data Type Value
- if(buffSize>UUID_BUFFER_SIZE-1) {
- return BLE_ERROR_INVALID_PARAM;
- }
-
- servUuidlength = buffSize+1; // +1 to include the Data Type Value
- servUuidData[0] = (uint8_t)(*loadPtr.getUnitAtIndex(index).getAdTypePtr()); //Data Type Value
-
- PRINTF("servUuidlength=%d servUuidData[0]=%d buffSize=%d\n\r", servUuidlength, servUuidData[0], buffSize);
- // Save the Service UUID list just after the Data Type Value field
- memcpy(servUuidData+1, loadPtr.getUnitAtIndex(index).getDataPtr(), buffSize);
-#ifdef DEBUG
- for(unsigned i=0; i<servUuidlength; i++) {
- PRINTF("servUuidData[%d] = 0x%x\n\r", i, servUuidData[i]);
- }
-
- for(unsigned i=0; i<buffSize; i++) {
- PRINTF("loadPtr.getUnitAtIndex(index).getDataPtr()[%d] = 0x%x\n\r",
- i, loadPtr.getUnitAtIndex(index).getDataPtr()[i]);
- }
-#endif /* DEBUG */
- break;
- }
- case GapAdvertisingData::INCOMPLETE_LIST_32BIT_SERVICE_IDS: /**< Incomplete list of 32-bit Service IDs (not relevant for Bluetooth 4.0) */
- {
- PRINTF("Advertising type: INCOMPLETE_LIST_32BIT_SERVICE_IDS\n\r");
- return BLE_ERROR_NOT_IMPLEMENTED;
- }
- case GapAdvertisingData::COMPLETE_LIST_32BIT_SERVICE_IDS: /**< Complete list of 32-bit Service IDs (not relevant for Bluetooth 4.0) */
- {
- PRINTF("Advertising type: COMPLETE_LIST_32BIT_SERVICE_IDS\n\r");
- return BLE_ERROR_NOT_IMPLEMENTED;
- }
- case GapAdvertisingData::SHORTENED_LOCAL_NAME: /**< Shortened Local Name */
- {
- break;
- }
- case GapAdvertisingData::COMPLETE_LOCAL_NAME: /**< Complete Local Name */
- {
- PRINTF("Advertising type: COMPLETE_LOCAL_NAME\n\r");
- loadPtr.getUnitAtIndex(index).printDataAsString();
- local_name_length = *loadPtr.getUnitAtIndex(index).getLenPtr()-1;
- // The total length should include the Data Type Value
- if(local_name_length>ADV_DATA_MAX_SIZE-1) {
- return BLE_ERROR_INVALID_PARAM;
- }
- local_name[0] = (uint8_t)(*loadPtr.getUnitAtIndex(index).getAdTypePtr()); //Data Type Value
- memcpy(local_name+1, (uint8_t*)loadPtr.getUnitAtIndex(index).getDataPtr(), local_name_length-1);
- PRINTF("Advertising type: COMPLETE_LOCAL_NAME local_name=%s local_name_length=%d\n\r", local_name+1, local_name_length);
-
- break;
- }
- case GapAdvertisingData::TX_POWER_LEVEL: /**< TX Power Level (in dBm) */
+ /**< TX Power Level (in dBm) */
+ case GapAdvertisingData::TX_POWER_LEVEL:
{
PRINTF("Advertising type: TX_POWER_LEVEL\n\r");
int8_t enHighPower = 0;
@@ -218,47 +133,11 @@
#endif
if(ret == BLE_STATUS_SUCCESS) {
aci_hal_set_tx_power_level(enHighPower, paLevel);
- txPowLevSet = 1;
}
break;
}
- case GapAdvertisingData::DEVICE_ID: /**< Device ID */
- {
- break;
- }
- case GapAdvertisingData::SLAVE_CONNECTION_INTERVAL_RANGE: /**< Slave :Connection Interval Range */
- {
- PRINTF("Advertising type: SLAVE_CONNECTION_INTERVAL_RANGE\n\r");
- uint8_t *ptr = loadPtr.getUnitAtIndex(index).getDataPtr();
- slaveConnIntervMin = ptr[0]|ptr[1]<<8;
- slaveConnIntervMax = ptr[2]|ptr[3]<<8;
-
- break;
- }
- case GapAdvertisingData::SERVICE_DATA: /**< Service Data */
- {
- PRINTF("Advertising type: SERVICE_DATA\n\r");
- uint8_t buffSize = *loadPtr.getUnitAtIndex(index).getLenPtr()-1;
- PRINTF("Advertising type: SERVICE_DATA (buffSize=%d)\n\r", buffSize);
- // the total ADV DATA LEN should include two more bytes: the buffer size byte; and the Service Data Type Value byte
- if(buffSize>ADV_DATA_MAX_SIZE-2) {
- return BLE_ERROR_PARAM_OUT_OF_RANGE;
- }
-#ifdef DEBUG
- for(int i=0; i<buffSize+1; i++) {
- PRINTF("Advertising type: SERVICE_DATA loadPtr.getUnitAtIndex(index).getDataPtr()[%d] = 0x%x\n\r",
- i, loadPtr.getUnitAtIndex(index).getDataPtr()[i]);
- }
-#endif
- // the total ADV DATA LEN should include two more bytes: the buffer size byte; and the Service Data Type Value byte
- AdvData[AdvLen++] = buffSize+1; // the fisrt byte is the data buffer size (type+data)
- AdvData[AdvLen++] = AD_TYPE_SERVICE_DATA;
- memcpy(&AdvData[AdvLen], loadPtr.getUnitAtIndex(index).getDataPtr(), buffSize);
- AdvLen += buffSize;
- break;
- }
-
- case GapAdvertisingData::APPEARANCE: /**< Appearance */
+ /**< Appearance */
+ case GapAdvertisingData::APPEARANCE:
{
PRINTF("Advertising type: APPEARANCE\n\r");
@@ -273,59 +152,14 @@
break;
}
- case GapAdvertisingData::ADVERTISING_INTERVAL: /**< Advertising Interval */
- {
- PRINTF("Advertising type: ADVERTISING_INTERVAL\n\r");
- uint8_t buffSize = *loadPtr.getUnitAtIndex(index).getLenPtr()-1;
- AdvData[AdvLen++] = buffSize+1; // the fisrt byte is the data buffer size (type+data)
- AdvData[AdvLen++] = AD_TYPE_ADVERTISING_INTERVAL;
- memcpy(&AdvData[AdvLen], loadPtr.getUnitAtIndex(index).getDataPtr(), buffSize);
- AdvLen += buffSize;
- break;
- }
- case GapAdvertisingData::MANUFACTURER_SPECIFIC_DATA: /**< Manufacturer Specific Data */
- {
- PRINTF("Advertising type: MANUFACTURER_SPECIFIC_DATA\n\r");
- uint8_t buffSize = *loadPtr.getUnitAtIndex(index).getLenPtr()-1;
- PRINTF("Advertising type: MANUFACTURER_SPECIFIC_DATA (buffSize=%d)\n\r", buffSize);
- // the total ADV DATA LEN should include two more bytes:
- // the buffer size byte;
- // and the Manufacturer Specific Data Type Value byte
- if(buffSize>ADV_DATA_MAX_SIZE-2) {
- return BLE_ERROR_PARAM_OUT_OF_RANGE;
- }
-#ifdef DBEUG
- for(int i=0; i<buffSize+1; i++) {
- PRINTF("Advertising type: MANUFACTURER_SPECIFIC_DATA loadPtr.getUnitAtIndex(index).getDataPtr()[%d] = 0x%x\n\r",
- i, loadPtr.getUnitAtIndex(index).getDataPtr()[i]);
- }
-#endif
- // the total ADV DATA LEN should include two more bytes: the buffer size byte; and the Manufacturer Specific Data Type Value byte
- AdvData[AdvLen++] = buffSize+1; // the fisrt byte is the data buffer size (type+data)
- AdvData[AdvLen++] = AD_TYPE_MANUFACTURER_SPECIFIC_DATA;
- memcpy(&AdvData[AdvLen], loadPtr.getUnitAtIndex(index).getDataPtr(), buffSize);
- AdvLen += buffSize;
- break;
- }
} // end switch
} //end for
- //Set the SCAN_RSP Payload
- if(scanResponse.getPayloadLen() > 0) {
- scan_response_payload = scanResponse.getPayload();
- scan_rsp_length = scanResponse.getPayloadLen();
- }
-
- _advData = advData;
}
- int err = hci_le_set_advertising_data(advData.getPayloadLen(), advData.getPayload());
-
- if (err) {
- PRINTF("error while setting the payload\r\n");
- return BLE_ERROR_UNSPECIFIED;
- }
+ _advData = advData;
+ _scanResponse = scanResponse;
return BLE_ERROR_NONE;
}
@@ -396,7 +230,7 @@
ble_error_t BlueNRGGap::startAdvertising(const GapAdvertisingParams ¶ms)
{
tBleStatus ret;
- ble_error_t rc;
+ int err;
/* Make sure we support the advertising type */
if (params.getAdvertisingType() == GapAdvertisingParams::ADV_CONNECTABLE_DIRECTED) {
@@ -465,8 +299,8 @@
params.getAdvertisingType() == GapAdvertisingParams::ADV_SCANNABLE_UNDIRECTED) {
/* set scan response data */
- PRINTF(" setting scan response data (scan_rsp_length=%u)\n", scan_rsp_length);
- ret = hci_le_set_scan_resp_data(scan_rsp_length, scan_response_payload);
+ PRINTF(" setting scan response data (_scanResponseLen=%u)\n", _scanResponse.getPayloadLen());
+ ret = hci_le_set_scan_resp_data(_scanResponse.getPayloadLen(), _scanResponse.getPayload());
if(BLE_STATUS_SUCCESS!=ret) {
PRINTF(" error while setting scan response data (ret=0x%x)\n", ret);
@@ -481,15 +315,21 @@
hci_le_set_scan_resp_data(0, NULL);
}
- //advInterval = params.getIntervalInADVUnits();
setAdvParameters();
PRINTF("advInterval=%d advType=%d\n\r", advInterval, params.getAdvertisingType());
+ err = hci_le_set_advertising_data(_advData.getPayloadLen(), _advData.getPayload());
+
+ if (err) {
+ PRINTF("error while setting the payload\r\n");
+ return BLE_ERROR_UNSPECIFIED;
+ }
+
tBDAddr dummy_addr = { 0 };
uint16_t advIntervalMin = advInterval == GapAdvertisingParams::GAP_ADV_PARAMS_INTERVAL_MAX ? advInterval - 1 : advInterval;
uint16_t advIntervalMax = advIntervalMin + 1;
- int err = hci_le_set_advertising_parameters(
+ err = hci_le_set_advertising_parameters(
advIntervalMin,
advIntervalMax,
params.getAdvertisingType(),
@@ -527,124 +367,8 @@
return BLE_ERROR_NONE;
-
-
-
- // /* Setting discoverable mode */
- // ret = aci_gap_set_discoverable(params.getAdvertisingType(), // AdvType
- // advInterval, // AdvIntervMin
- // advInterval, // AdvIntervMax
- // addr_type, // OwnAddrType
- // advFilterPolicy, // AdvFilterPolicy
- // local_name_length, // LocalNameLen
- // (const char*)local_name, // LocalName
- // servUuidlength, // ServiceUUIDLen
- // servUuidData, // ServiceUUIDList
- // slaveConnIntervMin, // SlaveConnIntervMin
- // slaveConnIntervMax); // SlaveConnIntervMax
-
-
- PRINTF("!!!setting discoverable (servUuidlength=0x%x)\n\r", servUuidlength);
- if(BLE_STATUS_SUCCESS!=ret) {
- PRINTF("error occurred while setting discoverable (ret=0x%x)\n\r", ret);
- switch (ret) {
- case BLE_STATUS_INVALID_PARAMS:
- case ERR_INVALID_HCI_CMD_PARAMS:
- return BLE_ERROR_INVALID_PARAM;
- case ERR_COMMAND_DISALLOWED:
- return BLE_ERROR_OPERATION_NOT_PERMITTED;
- case ERR_UNSUPPORTED_FEATURE:
- return BLE_ERROR_NOT_IMPLEMENTED;
- case BLE_STATUS_TIMEOUT:
- return BLE_STACK_BUSY;
- default:
- return BLE_ERROR_UNSPECIFIED;
- }
- }
-
- // Since AD_TYPE_TX_POWER_LEVEL has not been set by application, we delete it
- if(!txPowLevSet) {
- PRINTF("Deleting TX POW LEV\n");
- aci_gap_delete_ad_type(AD_TYPE_TX_POWER_LEVEL);
- txPowLevSet = 0;
- }
-
- // Stop Advertising if an error occurs while updating ADV data
- rc = updateAdvertisingData();
- if(rc != BLE_ERROR_NONE) {
- aci_gap_set_non_discoverable();
- return rc;
- }
}
-ble_error_t BlueNRGGap::updateAdvertisingData(void)
-{
- tBleStatus ret;
-
- // Before updating the ADV data, delete COMPLETE_LOCAL_NAME field
- if(AdvLen > 0) {
- if(local_name_length > 0) {
- ret = aci_gap_delete_ad_type(AD_TYPE_COMPLETE_LOCAL_NAME);
- if (BLE_STATUS_SUCCESS!=ret){
- PRINTF("aci_gap_delete_ad_type failed return=%d\n", ret);
- switch (ret) {
- case BLE_STATUS_TIMEOUT:
- return BLE_STACK_BUSY;
- case ERR_COMMAND_DISALLOWED:
- return BLE_ERROR_OPERATION_NOT_PERMITTED;
- case ERR_INVALID_HCI_CMD_PARAMS:
- return BLE_ERROR_INVALID_PARAM;
- default:
- return BLE_ERROR_UNSPECIFIED;
- }
- }
- }
-
- // ...and TX_POWER_LEVEL field to make the needed room in ADV payload
- if(txPowLevSet) {
- ret = aci_gap_delete_ad_type(AD_TYPE_TX_POWER_LEVEL);
- if (BLE_STATUS_SUCCESS!=ret){
- PRINTF("aci_gap_delete_ad_type failed return=%d\n", ret);
- switch (ret) {
- case BLE_STATUS_TIMEOUT:
- return BLE_STACK_BUSY;
- case ERR_COMMAND_DISALLOWED:
- return BLE_ERROR_OPERATION_NOT_PERMITTED;
- case ERR_INVALID_HCI_CMD_PARAMS:
- return BLE_ERROR_INVALID_PARAM;
- default:
- return BLE_ERROR_UNSPECIFIED;
- }
- }
- }
-
- ret = aci_gap_update_adv_data(AdvLen, AdvData);
- if(BLE_STATUS_SUCCESS!=ret) {
- PRINTF("error occurred while adding adv data (ret=0x%x)\n\r", ret);
- switch (ret) {
- case BLE_STATUS_TIMEOUT:
- return BLE_STACK_BUSY;
- case ERR_INVALID_HCI_CMD_PARAMS:
- case BLE_STATUS_INVALID_PARAMS:
- return BLE_ERROR_INVALID_PARAM;
- case BLE_STATUS_FAILED:
- return BLE_ERROR_PARAM_OUT_OF_RANGE;
- default:
- return BLE_ERROR_UNSPECIFIED;
- }
- }
-
- } // AdvLen>0
-
- if(deviceAppearance != 0) {
- uint8_t appearance[] = {3, AD_TYPE_APPEARANCE, deviceAppearance[0], deviceAppearance[1]};
- // just ignore error code while setting appearance
- aci_gap_update_adv_data(4, appearance);
- }
-
- return BLE_ERROR_NONE;
-
-}
/**************************************************************************/
/*!
@@ -664,29 +388,14 @@
/**************************************************************************/
ble_error_t BlueNRGGap::stopAdvertising(void)
{
- tBleStatus ret;
if(state.advertising == 1) {
- //Set non-discoverable to stop advertising
- //
-// ret = aci_gap_set_non_discoverable();
int err = hci_le_set_advertise_enable(0);
if (err) {
return BLE_ERROR_OPERATION_NOT_PERMITTED;
}
- // if (BLE_STATUS_SUCCESS!=ret){
- // PRINTF("Error in stopping advertisement (ret=0x%x)!!\n\r", ret) ;
- // switch (ret) {
- // case ERR_COMMAND_DISALLOWED:
- // return BLE_ERROR_OPERATION_NOT_PERMITTED;
- // case BLE_STATUS_TIMEOUT:
- // return BLE_STACK_BUSY;
- // default:
- // return BLE_ERROR_UNSPECIFIED;
- // }
- // }
PRINTF("Advertisement stopped!!\n\r") ;
//Set GapState_t::advertising state
state.advertising = 0;
@@ -1663,11 +1372,6 @@
/* Clear derived class members */
m_connectionHandle = BLE_CONN_HANDLE_INVALID;
- memset(deviceAppearance, 0, sizeof(deviceAppearance));
- memset(local_name, 0, LOCAL_NAME_MAX_SIZE);
- memset(local_name, 0, UUID_BUFFER_SIZE);
- memset(AdvData, 0, ADV_DATA_MAX_SIZE);
-
/* Set the whitelist policy filter modes to IGNORE_WHITELIST */
advertisingPolicyMode = Gap::ADV_POLICY_IGNORE_WHITELIST;
scanningPolicyMode = Gap::SCAN_POLICY_IGNORE_WHITELIST;