Varun Bahl
Updated
Fork of
BLE_API
by 
Bluetooth Low Energy
Diff: ble/BLE.h
- Revision:
- 1131:692ddf04fc42
- Parent:
- 1119:7a487d506451
- Child:
- 1135:22aada733dbd
--- a/ble/BLE.h Tue Jan 12 19:47:52 2016 +0000
+++ b/ble/BLE.h Wed Apr 06 19:13:46 2016 +0100
@@ -1,1444 +1,1444 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __BLE_H__
-#define __BLE_H__
-
-#include "blecommon.h"
-#include "Gap.h"
-#include "GattServer.h"
-#include "GattClient.h"
-
-#include "ble/FunctionPointerWithContext.h"
-
-#ifdef YOTTA_CFG_MBED_OS
-#include "mbed-drivers/mbed_error.h"
-#else
-#include "mbed_error.h"
-#endif
-
-/* Forward declaration for the implementation class */
-class BLEInstanceBase;
-
-/**
- * The base class used to abstract away BLE-capable radio transceivers or SOCs,
- * so that the BLE API can work with any radio transparently.
- */
-class BLE
-{
-public:
- typedef unsigned InstanceID_t; /** The type returned by BLE::getInstanceID(). */
-
- /**
- * The context provided to init-completion-callbacks (see init() below).
- *
- * @param ble
- * A reference to the BLE instance being initialized.
- * @param error
- * Captures the result of initialization. It is set to
- * BLE_ERROR_NONE if initialization completed successfully. Else
- * the error value is implementation specific.
- */
- struct InitializationCompleteCallbackContext {
- BLE& ble; /* Reference to the BLE object that has been initialized */
- ble_error_t error; /* Error status of the initialization. It is set to BLE_ERROR_NONE if initialization completed successfully. */
- };
-
- /**
- * The signature for function-pointer like callbacks for initialization-completion.
- *
- * @note There are two versions of init(). In addition to the simple
- * function-pointer, init() can also take a <Object, member> tuple as its
- * callback target. In case of the latter, the following declaration doesn't apply.
- */
- typedef void (*InitializationCompleteCallback_t)(InitializationCompleteCallbackContext *context);
-
- /**
- * Initialize the BLE controller. This should be called before using
- * anything else in the BLE_API.
- *
- * init() hands control to the underlying BLE module to accomplish
- * initialization. This initialization may tacitly depend on other hardware
- * setup (such as clocks or power-modes) that happens early on during
- * system startup. It may not be safe to call init() from a global static
- * context where ordering is compiler-specific and can't be guaranteed - it
- * is safe to call BLE::init() from within main().
- *
- * @param initCompleteCallback
- * A callback for when initialization completes for a BLE
- * instance. This is an optional parameter; if no callback is
- * set up the application can still determine the status of
- * initialization using BLE::hasInitialized() (see below).
- *
- * @return BLE_ERROR_NONE if the initialization procedure was started
- * successfully.
- *
- * @note If init() returns BLE_ERROR_NONE, the underlying stack must invoke
- * the initialization completion callback at some point.
- *
- * @note In some cases, initialization is instantaneous (or blocking); if
- * so, it is acceptable for the stack-specific implementation of init()
- * to invoke the completion callback directly (within its own
- * context).
- *
- * @note Nearly all BLE APIs would return
- * BLE_ERROR_INITIALIZATION_INCOMPLETE if used on an instance before the
- * corresponding transport is initialized.
- *
- * @note There are two versions of init(). In addition to the simple
- * function-pointer, init() can also take an <Object, member> tuple as its
- * callback target.
- */
- ble_error_t init(InitializationCompleteCallback_t initCompleteCallback = NULL) {
- FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(initCompleteCallback);
- return initImplementation(callback);
- }
-
- /**
- * An alternate declaration for init(). This one takes an <Object, member> tuple as its
- * callback target.
- */
- template<typename T>
- ble_error_t init(T *object, void (T::*initCompleteCallback)(InitializationCompleteCallbackContext *context)) {
- FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(object, initCompleteCallback);
- return initImplementation(callback);
- }
-
- /**
- * @return true if initialization has completed for the underlying BLE
- * transport.
- *
- * The application can set up a callback to signal completion of
- * initialization when using init(). Otherwise, this method can be used to
- * poll the state of initialization.
- */
- bool hasInitialized(void) const;
-
- /**
- * Purge the BLE stack of GATT and GAP state. init() must be called
- * afterwards to re-instate services and GAP state. This API offers a way to
- * repopulate the GATT database with new services and characteristics.
- */
- ble_error_t shutdown(void);
-
- /**
- * This call allows the application to get the BLE stack version information.
- *
- * @return A pointer to a const string representing the version.
- * Note: The string is owned by BLE_API.
- */
- const char *getVersion(void);
-
- /*
- * Accessors to GAP. Please refer to Gap.h. All GAP related functionality requires
- * going through this accessor.
- */
- const Gap &gap() const;
- Gap &gap();
-
- /*
- * Accessors to GATT Server. Please refer to GattServer.h. All GATTServer related
- * functionality requires going through this accessor.
- */
- const GattServer& gattServer() const;
- GattServer& gattServer();
-
- /*
- * Accessors to GATT Client. Please refer to GattClient.h. All GATTClient related
- * functionality requires going through this accessor.
- */
- const GattClient& gattClient() const;
- GattClient& gattClient();
-
- /*
- * Accessors to Security Manager. Please refer to SecurityManager.h. All
- * SecurityManager related functionality requires going through this
- * accessor.
- */
- const SecurityManager& securityManager() const;
- SecurityManager& securityManager();
-
- /**
- * Yield control to the BLE stack or to other tasks waiting for events. This
- * is a sleep function that will return when there is an application-specific
- * interrupt, but the MCU might wake up several times before
- * returning (to service the stack). This is not always interchangeable with
- * WFE().
- */
- void waitForEvent(void);
-
-public:
- static const InstanceID_t DEFAULT_INSTANCE = 0;
-#ifndef YOTTA_CFG_BLE_INSTANCES_COUNT
- static const InstanceID_t NUM_INSTANCES = 1;
-#else
- static const InstanceID_t NUM_INSTANCES = YOTTA_CFG_BLE_INSTANCES_COUNT;
-#endif
-
- /**
- * Get a reference to the BLE singleton corresponding to a given interface.
- * There is a static array of BLE singletons.
- *
- * @Note: Calling Instance() is preferred over constructing a BLE object
- * directly, as it returns references to singletons.
- *
- * @param[in] id
- * Instance-ID. This should be less than NUM_INSTANCES
- * for the returned BLE singleton to be useful.
- *
- * @return a reference to a single object.
- */
- static BLE &Instance(InstanceID_t id = DEFAULT_INSTANCE);
-
- /**
- * Constructor for a handle to a BLE instance (the BLE stack). BLE handles
- * are thin wrappers around a transport object (that is, ptr. to
- * BLEInstanceBase).
- *
- * It is better to create BLE objects as singletons accessed through the
- * Instance() method. If multiple BLE handles are constructed for the same
- * interface (using this constructor), they will share the same underlying
- * transport object.
- */
- BLE(InstanceID_t instanceID = DEFAULT_INSTANCE);
-
- /**
- * Fetch the ID of a BLE instance. Typically there would only be the DEFAULT_INSTANCE.
- */
- InstanceID_t getInstanceID(void) const {
- return instanceID;
- }
-
- /*
- * Deprecation alert!
- * All of the following are deprecated and may be dropped in a future
- * release. Documentation should refer to alternative APIs.
- */
-
- /* GAP specific APIs. */
-public:
- /**
- * Set the BTLE MAC address and type.
- * @return BLE_ERROR_NONE on success.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAddress(...) should be replaced with
- * ble.gap().setAddress(...).
- */
- ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::AddressBytes_t address) {
- return gap().setAddress(type, address);
- }
-
- /**
- * Fetch the BTLE MAC address and type.
- * @return BLE_ERROR_NONE on success.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getAddress(...) should be replaced with
- * ble.gap().getAddress(...).
- */
- ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::AddressBytes_t address) {
- return gap().getAddress(typeP, address);
- }
-
- /**
- * Set the GAP advertising mode to use for this device.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAdvertisingType(...) should be replaced with
- * ble.gap().setAdvertisingType(...).
- */
- void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
- gap().setAdvertisingType(advType);
- }
-
- /**
- * @param[in] interval
- * Advertising interval in units of milliseconds. Advertising
- * is disabled if interval is 0. If interval is smaller than
- * the minimum supported value, then the minimum supported
- * value is used instead. This minimum value can be discovered
- * using getMinAdvertisingInterval().
- *
- * This field must be set to 0 if connectionMode is equal
- * to ADV_CONNECTABLE_DIRECTED.
- *
- * @note: Decreasing this value allows central devices to detect a
- * peripheral faster, at the expense of more power being used by the radio
- * due to the higher data transmit rate.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAdvertisingInterval(...) should be replaced with
- * ble.gap().setAdvertisingInterval(...).
- *
- * @note: [WARNING] This API previously used 0.625ms as the unit for its
- * 'interval' argument. That required an explicit conversion from
- * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
- * no longer required as the new units are milliseconds. Any application
- * code depending on the old semantics needs to be updated accordingly.
- */
- void setAdvertisingInterval(uint16_t interval) {
- gap().setAdvertisingInterval(interval);
- }
-
- /**
- * @return Minimum Advertising interval in milliseconds.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getMinAdvertisingInterval(...) should be replaced with
- * ble.gap().getMinAdvertisingInterval(...).
- */
- uint16_t getMinAdvertisingInterval(void) const {
- return gap().getMinAdvertisingInterval();
- }
-
- /**
- * @return Minimum Advertising interval in milliseconds for non-connectible mode.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
- * ble.gap().getMinNonConnectableAdvertisingInterval(...).
- */
- uint16_t getMinNonConnectableAdvertisingInterval(void) const {
- return gap().getMinNonConnectableAdvertisingInterval();
- }
-
- /**
- * @return Maximum Advertising interval in milliseconds.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getMaxAdvertisingInterval(...) should be replaced with
- * ble.gap().getMaxAdvertisingInterval(...).
- */
- uint16_t getMaxAdvertisingInterval(void) const {
- return gap().getMaxAdvertisingInterval();
- }
-
- /**
- * @param[in] timeout
- * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
- * and 16383). Use 0 to disable the advertising timeout.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAdvertisingTimeout(...) should be replaced with
- * ble.gap().setAdvertisingTimeout(...).
- */
- void setAdvertisingTimeout(uint16_t timeout) {
- gap().setAdvertisingTimeout(timeout);
- }
-
- /**
- * Set up a particular, user-constructed set of advertisement parameters for
- * the underlying stack. It would be uncommon for this API to be used
- * directly; there are other APIs to tweak advertisement parameters
- * individually (see above).
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAdvertisingParams(...) should be replaced with
- * ble.gap().setAdvertisingParams(...).
- */
- void setAdvertisingParams(const GapAdvertisingParams &advParams) {
- gap().setAdvertisingParams(advParams);
- }
-
- /**
- * @return Read back advertising parameters. Useful for storing and
- * restoring parameters rapidly.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getAdvertisingParams(...) should be replaced with
- * ble.gap().getAdvertisingParams(...).
- */
- const GapAdvertisingParams &getAdvertisingParams(void) const {
- return gap().getAdvertisingParams();
- }
-
- /**
- * Accumulate an AD structure in the advertising payload. Please note that
- * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
- * as an additional 31 bytes if the advertising payload is too
- * small.
- *
- * @param[in] flags
- * The flags to add. Please refer to
- * GapAdvertisingData::Flags for valid flags. Multiple
- * flags may be specified in combination.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.accumulateAdvertisingPayload(flags) should be replaced with
- * ble.gap().accumulateAdvertisingPayload(flags).
- */
- ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
- return gap().accumulateAdvertisingPayload(flags);
- }
-
- /**
- * Accumulate an AD structure in the advertising payload. Please note that
- * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
- * as an additional 31 bytes if the advertising payload is too
- * small.
- *
- * @param[in] app
- * The appearance of the peripheral.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.accumulateAdvertisingPayload(appearance) should be replaced with
- * ble.gap().accumulateAdvertisingPayload(appearance).
- */
- ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
- return gap().accumulateAdvertisingPayload(app);
- }
-
- /**
- * Accumulate an AD structure in the advertising payload. Please note that
- * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
- * as an additional 31 bytes if the advertising payload is too
- * small.
- *
- * @param[in] app
- * The max transmit power to be used by the controller. This
- * is only a hint.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
- * ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
- */
- ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
- return gap().accumulateAdvertisingPayloadTxPower(power);
- }
-
- /**
- * Accumulate a variable length byte-stream as an AD structure in the
- * advertising payload. Please note that the payload is limited to 31 bytes.
- * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
- * advertising payload is too small.
- *
- * @param type The type that describes the variable length data.
- * @param data Data bytes.
- * @param len Data length.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.accumulateAdvertisingPayload(...) should be replaced with
- * ble.gap().accumulateAdvertisingPayload(...).
- */
- ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
- return gap().accumulateAdvertisingPayload(type, data, len);
- }
-
- /**
- * Setup a particular, user-constructed advertisement payload for the
- * underlying stack. It would be uncommon for this API to be used directly;
- * there are other APIs to build an advertisement payload (see above).
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAdvertisingData(...) should be replaced with
- * ble.gap().setAdvertisingPayload(...).
- */
- ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
- return gap().setAdvertisingPayload(advData);
- }
-
- /**
- * @return Read back advertising data. Useful for storing and
- * restoring payload.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getAdvertisingData(...) should be replaced with
- * ble.gap().getAdvertisingPayload()(...).
- */
- const GapAdvertisingData &getAdvertisingData(void) const {
- return gap().getAdvertisingPayload();
- }
-
- /**
- * Reset any advertising payload prepared from prior calls to
- * accumulateAdvertisingPayload(). This automatically propagates the re-
- * initialized advertising payload to the underlying stack.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.clearAdvertisingPayload(...) should be replaced with
- * ble.gap().clearAdvertisingPayload(...).
- */
- void clearAdvertisingPayload(void) {
- gap().clearAdvertisingPayload();
- }
-
- /**
- * This API is *deprecated* and resolves to a no-operation. It is left here
- * to allow older code to compile. Please avoid using this API in new code.
- * This API will be dropped in a future release.
- *
- * Formerly, it would be used to dynamically reset the accumulated advertising
- * payload and scanResponse; to do this, the application would clear and re-
- * accumulate a new advertising payload (and scanResponse) before using this
- * API. Updates to the underlying advertisement payload now happen
- * implicitly.
- */
- ble_error_t setAdvertisingPayload(void) {
- return BLE_ERROR_NONE;
- }
-
- /**
- * Accumulate a variable length byte-stream as an AD structure in the
- * scanResponse payload.
- *
- * @param[in] type The type that describes the variable length data.
- * @param[in] data Data bytes.
- * @param[in] len Data length.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.accumulateScanResponse(...) should be replaced with
- * ble.gap().accumulateScanResponse(...).
- */
- ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
- return gap().accumulateScanResponse(type, data, len);
- }
-
- /**
- * Reset any scan response prepared from prior calls to
- * accumulateScanResponse().
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.clearScanResponse(...) should be replaced with
- * ble.gap().clearScanResponse(...).
- */
- void clearScanResponse(void) {
- gap().clearScanResponse();
- }
-
- /**
- * Start advertising.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.startAdvertising(...) should be replaced with
- * ble.gap().startAdvertising(...).
- */
- ble_error_t startAdvertising(void) {
- return gap().startAdvertising();
- }
-
- /**
- * Stop advertising.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.stopAdvertising(...) should be replaced with
- * ble.gap().stopAdvertising(...).
- */
- ble_error_t stopAdvertising(void) {
- return gap().stopAdvertising();
- }
-
- /**
- * Set up parameters for GAP scanning (observer mode).
- * @param[in] interval
- * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
- * @param[in] window
- * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
- * @param[in] timeout
- * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
- * @param[in] activeScanning
- * Set to True if active-scanning is required. This is used to fetch the
- * scan response from a peer if possible.
- *
- * The scanning window divided by the interval determines the duty cycle for
- * scanning. For example, if the interval is 100ms and the window is 10ms,
- * then the controller will scan for 10 percent of the time. It is possible
- * to have the interval and window set to the same value. In this case,
- * scanning is continuous, with a change of scanning frequency once every
- * interval.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- *
- * @Note: The scan interval and window are recommendations to the BLE stack.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setScanParams(...) should be replaced with
- * ble.gap().setScanParams(...).
- */
- ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
- uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
- uint16_t timeout = 0,
- bool activeScanning = false) {
- return gap().setScanParams(interval, window, timeout, activeScanning);
- }
-
- /**
- * Set up the scanInterval parameter for GAP scanning (observer mode).
- * @param[in] interval
- * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
- *
- * The scanning window divided by the interval determines the duty cycle for
- * scanning. For example, if the interval is 100ms and the window is 10ms,
- * then the controller will scan for 10 percent of the time. It is possible
- * to have the interval and window set to the same value. In this case,
- * scanning is continuous, with a change of scanning frequency once every
- * interval.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setScanInterval(interval) should be replaced with
- * ble.gap().setScanInterval(interval).
- */
- ble_error_t setScanInterval(uint16_t interval) {
- return gap().setScanInterval(interval);
- }
-
- /**
- * Set up the scanWindow parameter for GAP scanning (observer mode).
- * @param[in] window
- * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
- *
- * The scanning window divided by the interval determines the duty cycle for
- * scanning. For example, if the interval is 100ms and the window is 10ms,
- * then the controller will scan for 10 percent of the time. It is possible
- * to have the interval and window set to the same value. In this case,
- * scanning is continuous, with a change of scanning frequency once every
- * interval.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setScanWindow(window) should be replaced with
- * ble.gap().setScanWindow(window).
- */
- ble_error_t setScanWindow(uint16_t window) {
- return gap().setScanWindow(window);
- }
-
- /**
- * Set up parameters for GAP scanning (observer mode).
- * @param[in] timeout
- * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
- *
- * The scanning window divided by the interval determines the duty cycle for
- * scanning. For example, if the interval is 100ms and the window is 10ms,
- * then the controller will scan for 10 percent of the time. It is possible
- * to have the interval and window set to the same value. In this case,
- * scanning is continuous, with a change of scanning frequency once every
- * interval.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- *
- * @Note: The scan interval and window are recommendations to the BLE stack.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setScanTimeout(...) should be replaced with
- * ble.gap().setScanTimeout(...).
- */
- ble_error_t setScanTimeout(uint16_t timeout) {
- return gap().setScanTimeout(timeout);
- }
-
- /**
- * Set up parameters for GAP scanning (observer mode).
- * @param[in] activeScanning
- * Set to True if active-scanning is required. This is used to fetch the
- * scan response from a peer if possible.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setActiveScan(...) should be replaced with
- * ble.gap().setActiveScanning(...).
- */
- void setActiveScan(bool activeScanning) {
- gap().setActiveScanning(activeScanning);
- }
-
- /**
- * Start scanning (Observer Procedure) based on the parameters currently in
- * effect.
- *
- * @param[in] callback
- * The application-specific callback to be invoked upon
- * receiving every advertisement report. This can be passed in
- * as NULL, in which case scanning may not be enabled at all.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.startScan(callback) should be replaced with
- * ble.gap().startScan(callback).
- */
- ble_error_t startScan(void (*callback)(const Gap::AdvertisementCallbackParams_t *params)) {
- return gap().startScan(callback);
- }
-
- /**
- * Same as above, but this takes an (object, method) pair for a callback.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.startScan(callback) should be replaced with
- * ble.gap().startScan(object, callback).
- */
- template<typename T>
- ble_error_t startScan(T *object, void (T::*memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
-
- /**
- * Stop scanning. The current scanning parameters remain in effect.
- *
- * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.stopScan() should be replaced with
- * ble.gap().stopScan().
- */
- ble_error_t stopScan(void) {
- return gap().stopScan();
- }
-
- /**
- * Create a connection (GAP Link Establishment).
- * @param peerAddr
- * 48-bit address, LSB format.
- * @param peerAddrType
- * Address type of the peer.
- * @param connectionParams
- * Connection parameters.
- * @param scanParams
- * Paramters to use while scanning for the peer.
- * @return BLE_ERROR_NONE if connection establishment procedure is started
- * successfully. The onConnection callback (if set) is invoked upon
- * a connection event.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.connect(...) should be replaced with
- * ble.gap().connect(...).
- */
- ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
- BLEProtocol::AddressType_t peerAddrType = BLEProtocol::AddressType::RANDOM_STATIC,
- const Gap::ConnectionParams_t *connectionParams = NULL,
- const GapScanningParams *scanParams = NULL) {
- return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
- }
-
- /**
- * This call initiates the disconnection procedure, and its completion is
- * communicated to the application with an invocation of the
- * onDisconnection callback.
- *
- * @param[in] connectionHandle
- * @param[in] reason
- * The reason for disconnection; sent back to the peer.
- */
- ble_error_t disconnect(Gap::Handle_t connectionHandle, Gap::DisconnectionReason_t reason) {
- return gap().disconnect(connectionHandle, reason);
- }
-
- /**
- * This call initiates the disconnection procedure, and its completion
- * is communicated to the application with an invocation of the
- * onDisconnection callback.
- *
- * @param reason
- * The reason for disconnection; sent back to the peer.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.disconnect(reason) should be replaced with
- * ble.gap().disconnect(reason).
- *
- * @note: This version of disconnect() doesn't take a connection handle. It
- * works reliably only for stacks that are limited to a single
- * connection. This API should be considered *deprecated* in favour of the
- * alternative, which takes a connection handle. It will be dropped in the future.
- */
- ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
- return gap().disconnect(reason);
- }
-
- /**
- * Returns the current GAP state of the device using a bitmask that
- * describes whether the device is advertising or connected.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getGapState() should be replaced with
- * ble.gap().getState().
- */
- Gap::GapState_t getGapState(void) const {
- return gap().getState();
- }
-
- /**
- * Get the GAP peripheral's preferred connection parameters. These are the
- * defaults that the peripheral would like to have in a connection. The
- * choice of the connection parameters is eventually up to the central.
- *
- * @param[out] params
- * The structure where the parameters will be stored. Memory
- * for this is owned by the caller.
- *
- * @return BLE_ERROR_NONE if the parameters were successfully filled into
- * the given structure pointed to by params.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getPreferredConnectionParams() should be replaced with
- * ble.gap().getPreferredConnectionParams().
- */
- ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
- return gap().getPreferredConnectionParams(params);
- }
-
- /**
- * Set the GAP peripheral's preferred connection parameters. These are the
- * defaults that the peripheral would like to have in a connection. The
- * choice of the connection parameters is eventually up to the central.
- *
- * @param[in] params
- * The structure containing the desired parameters.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setPreferredConnectionParams() should be replaced with
- * ble.gap().setPreferredConnectionParams().
- */
- ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
- return gap().setPreferredConnectionParams(params);
- }
-
- /**
- * Update connection parameters while in the peripheral role.
- * @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
- * the central to perform the procedure.
- * @param[in] handle
- * Connection Handle
- * @param[in] params
- * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
- * the parameters in the PPCP characteristic of the GAP service will be used instead.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.updateConnectionParams() should be replaced with
- * ble.gap().updateConnectionParams().
- */
- ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
- return gap().updateConnectionParams(handle, params);
- }
-
- /**
- * Set the device name characteristic in the GAP service.
- * @param[in] deviceName
- * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setDeviceName() should be replaced with
- * ble.gap().setDeviceName().
- */
- ble_error_t setDeviceName(const uint8_t *deviceName) {
- return gap().setDeviceName(deviceName);
- }
-
- /**
- * Get the value of the device name characteristic in the GAP service.
- * @param[out] deviceName
- * Pointer to an empty buffer where the UTF-8 *non NULL-
- * terminated* string will be placed. Set this
- * value to NULL in order to obtain the deviceName-length
- * from the 'length' parameter.
- *
- * @param[in/out] lengthP
- * (on input) Length of the buffer pointed to by deviceName;
- * (on output) the complete device name length (without the
- * null terminator).
- *
- * @note If the device name is longer than the size of the supplied buffer,
- * length will return the complete device name length, and not the
- * number of bytes actually returned in deviceName. The application may
- * use this information to retry with a suitable buffer size.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getDeviceName() should be replaced with
- * ble.gap().getDeviceName().
- */
- ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
- return gap().getDeviceName(deviceName, lengthP);
- }
-
- /**
- * Set the appearance characteristic in the GAP service.
- * @param[in] appearance
- * The new value for the device-appearance.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAppearance() should be replaced with
- * ble.gap().setAppearance().
- */
- ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
- return gap().setAppearance(appearance);
- }
-
- /**
- * Get the appearance characteristic in the GAP service.
- * @param[out] appearance
- * The new value for the device-appearance.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getAppearance() should be replaced with
- * ble.gap().getAppearance().
- */
- ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
- return gap().getAppearance(appearanceP);
- }
-
- /**
- * Set the radio's transmit power.
- * @param[in] txPower Radio transmit power in dBm.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setTxPower() should be replaced with
- * ble.gap().setTxPower().
- */
- ble_error_t setTxPower(int8_t txPower) {
- return gap().setTxPower(txPower);
- }
-
- /**
- * Query the underlying stack for permitted arguments for setTxPower().
- *
- * @param[out] valueArrayPP
- * Out parameter to receive the immutable array of Tx values.
- * @param[out] countP
- * Out parameter to receive the array's size.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getPermittedTxPowerValues() should be replaced with
- * ble.gap().getPermittedTxPowerValues().
- */
- void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
- gap().getPermittedTxPowerValues(valueArrayPP, countP);
- }
-
- /**
- * Add a service declaration to the local server ATT table. Also add the
- * characteristics contained within.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.addService() should be replaced with
- * ble.gattServer().addService().
- */
- ble_error_t addService(GattService &service) {
- return gattServer().addService(service);
- }
-
- /**
- * Read the value of a characteristic from the local GattServer.
- * @param[in] attributeHandle
- * Attribute handle for the value attribute of the characteristic.
- * @param[out] buffer
- * A buffer to hold the value being read.
- * @param[in/out] lengthP
- * Length of the buffer being supplied. If the attribute
- * value is longer than the size of the supplied buffer,
- * this variable will return the total attribute value length
- * (excluding offset). The application may use this
- * information to allocate a suitable buffer size.
- *
- * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.readCharacteristicValue() should be replaced with
- * ble.gattServer().read().
- */
- ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
- return gattServer().read(attributeHandle, buffer, lengthP);
- }
-
- /**
- * Read the value of a characteristic from the local GattServer.
- * @param[in] connectionHandle
- * Connection Handle.
- * @param[in] attributeHandle
- * Attribute handle for the value attribute of the characteristic.
- * @param[out] buffer
- * A buffer to hold the value being read.
- * @param[in/out] lengthP
- * Length of the buffer being supplied. If the attribute
- * value is longer than the size of the supplied buffer,
- * this variable will return the total attribute value length
- * (excluding offset). The application may use this
- * information to allocate a suitable buffer size.
- *
- * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
- *
- * @note This API is a version of the above, with an additional connection handle
- * parameter to allow fetches for connection-specific multivalued
- * attributes (such as the CCCDs).
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.readCharacteristicValue() should be replaced with
- * ble.gattServer().read().
- */
- ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
- return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
- }
-
- /**
- * Update the value of a characteristic on the local GattServer.
- *
- * @param[in] attributeHandle
- * Handle for the value attribute of the characteristic.
- * @param[in] value
- * A pointer to a buffer holding the new value.
- * @param[in] size
- * Size of the new value (in bytes).
- * @param[in] localOnly
- * Should this update be kept on the local
- * GattServer regardless of the state of the
- * notify/indicate flag in the CCCD for this
- * characteristic? If set to true, no notification
- * or indication is generated.
- *
- * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.updateCharacteristicValue() should be replaced with
- * ble.gattServer().write().
- */
- ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
- const uint8_t *value,
- uint16_t size,
- bool localOnly = false) {
- return gattServer().write(attributeHandle, value, size, localOnly);
- }
-
- /**
- * Update the value of a characteristic on the local GattServer. A version
- * of the above, with a connection handle parameter to allow updates
- * for connection-specific multivalued attributes (such as the CCCDs).
- *
- * @param[in] connectionHandle
- * Connection Handle.
- * @param[in] attributeHandle
- * Handle for the value attribute of the Characteristic.
- * @param[in] value
- * A pointer to a buffer holding the new value.
- * @param[in] size
- * Size of the new value (in bytes).
- * @param[in] localOnly
- * Should this update be kept on the local
- * GattServer regardless of the state of the
- * notify/indicate flag in the CCCD for this
- * Characteristic? If set to true, no notification
- * or indication is generated.
- *
- * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.updateCharacteristicValue() should be replaced with
- * ble.gattServer().write().
- */
- ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
- GattAttribute::Handle_t attributeHandle,
- const uint8_t *value,
- uint16_t size,
- bool localOnly = false) {
- return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
- }
-
- /**
- * Enable the BLE stack's Security Manager. The Security Manager implements
- * the cryptographic algorithms and protocol exchanges that allow two
- * devices to securely exchange data and privately detect each other.
- * Calling this API is a prerequisite for encryption and pairing (bonding).
- *
- * @param[in] enableBonding Allow for bonding.
- * @param[in] requireMITM Require protection against man-in-the-middle attacks.
- * @param[in] iocaps To specify the I/O capabilities of this peripheral,
- * such as availability of a display or keyboard, to
- * support out-of-band exchanges of security data.
- * @param[in] passkey To specify a static passkey.
- *
- * @return BLE_ERROR_NONE on success.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.initializeSecurity(...) should be replaced with
- * ble.securityManager().init(...).
- */
- ble_error_t initializeSecurity(bool enableBonding = true,
- bool requireMITM = true,
- SecurityManager::SecurityIOCapabilities_t iocaps = SecurityManager::IO_CAPS_NONE,
- const SecurityManager::Passkey_t passkey = NULL) {
- return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
- }
-
- /**
- * Get the security status of a connection.
- *
- * @param[in] connectionHandle Handle to identify the connection.
- * @param[out] securityStatusP Security status.
- *
- * @return BLE_SUCCESS or appropriate error code indicating the reason of failure.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.getLinkSecurity(...) should be replaced with
- * ble.securityManager().getLinkSecurity(...).
- */
- ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
- return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
- }
-
- /**
- * Delete all peer device context and all related bonding information from
- * the database within the security manager.
- *
- * @retval BLE_ERROR_NONE On success; else returns an error code indicating the reason for the failure.
- * @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization or
- * application registration.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.purgeAllBondingState() should be replaced with
- * ble.securityManager().purgeAllBondingState().
- */
- ble_error_t purgeAllBondingState(void) {
- return securityManager().purgeAllBondingState();
- }
-
- /**
- * Set up a callback for timeout events. Refer to Gap::TimeoutSource_t for
- * possible event types.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call
- * to ble.onTimeout(callback) should be replaced with
- * ble.gap().onTimeout(callback).
- */
- void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
- gap().onTimeout(timeoutCallback);
- }
-
- /**
- * Set up a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call
- * to ble.onConnection(callback) should be replaced with
- * ble.gap().onConnection(callback).
- */
- void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
- gap().onConnection(connectionCallback);
- }
-
- /**
- * Append to a chain of callbacks to be invoked upon GAP disconnection.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call
- * to ble.onDisconnection(callback) should be replaced with
- * ble.gap().onDisconnection(callback).
- */
- void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
- gap().onDisconnection(disconnectionCallback);
- }
-
- template<typename T>
- void onDisconnection(T *tptr, void (T::*mptr)(const Gap::DisconnectionCallbackParams_t*)) {
- gap().onDisconnection(tptr, mptr);
- }
-
- /**
- * Radio Notification is a feature that enables ACTIVE and INACTIVE
- * (nACTIVE) signals from the stack. These notify the application when the
- * radio is in use. The signal is sent using software interrupt.
- *
- * The ACTIVE signal is sent before the radio event starts. The nACTIVE
- * signal is sent at the end of the radio event. These signals can be used
- * by the application programmer to synchronize application logic with radio
- * activity. For example, the ACTIVE signal can be used to shut off external
- * devices to manage peak current drawn during periods when the radio is on,
- * or to trigger sensor data collection for transmission in the radio event.
- *
- * @param callback
- * The application handler to be invoked in response to a radio
- * ACTIVE/INACTIVE event.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call
- * to ble.onRadioNotification(...) should be replaced with
- * ble.gap().onRadioNotification(...).
- */
- void onRadioNotification(void (*callback)(bool)) {
- gap().onRadioNotification(callback);
- }
-
- /**
- * Add a callback for the GATT event DATA_SENT (which is triggered when
- * updates are sent out by GATT in the form of notifications).
- *
- * @Note: It is possible to chain together multiple onDataSent callbacks
- * (potentially from different modules of an application) to receive updates
- * to characteristics.
- *
- * @Note: It is also possible to set up a callback into a member function of
- * some object.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onDataSent(...) should be replaced with
- * ble.gattServer().onDataSent(...).
- */
- void onDataSent(void (*callback)(unsigned count)) {
- gattServer().onDataSent(callback);
- }
- template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
- gattServer().onDataSent(objPtr, memberPtr);
- }
-
- /**
- * Set up a callback for when an attribute has its value updated by or at the
- * connected peer. For a peripheral, this callback is triggered when the local
- * GATT server has an attribute updated by a write command from the peer.
- * For a Central, this callback is triggered when a response is received for
- * a write request.
- *
- * @Note: It is possible to chain together multiple onDataWritten callbacks
- * (potentially from different modules of an application) to receive updates
- * to characteristics. Many services, such as DFU and UART, add their own
- * onDataWritten callbacks behind the scenes to trap interesting events.
- *
- * @Note: It is also possible to set up a callback into a member function of
- * some object.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onDataWritten(...) should be replaced with
- * ble.gattServer().onDataWritten(...).
- */
- void onDataWritten(void (*callback)(const GattWriteCallbackParams *eventDataP)) {
- gattServer().onDataWritten(callback);
- }
- template <typename T> void onDataWritten(T * objPtr, void (T::*memberPtr)(const GattWriteCallbackParams *context)) {
- gattServer().onDataWritten(objPtr, memberPtr);
- }
-
- /**
- * Set up a callback to be invoked on the peripheral when an attribute is
- * being read by a remote client.
- *
- * @Note: This functionality may not be available on all underlying stacks.
- * You could use GattCharacteristic::setReadAuthorizationCallback() as an
- * alternative.
- *
- * @Note: It is possible to chain together multiple onDataRead callbacks
- * (potentially from different modules of an application) to receive updates
- * to characteristics. Services may add their own onDataRead callbacks
- * behind the scenes to trap interesting events.
- *
- * @Note: It is also possible to set up a callback into a member function of
- * some object.
- *
- * @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
- * else BLE_ERROR_NONE.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onDataRead(...) should be replaced with
- * ble.gattServer().onDataRead(...).
- */
- ble_error_t onDataRead(void (*callback)(const GattReadCallbackParams *eventDataP)) {
- return gattServer().onDataRead(callback);
- }
- template <typename T> ble_error_t onDataRead(T * objPtr, void (T::*memberPtr)(const GattReadCallbackParams *context)) {
- return gattServer().onDataRead(objPtr, memberPtr);
- }
-
- /**
- * Set up a callback for when notifications or indications are enabled for a
- * characteristic on the local GattServer.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onUpdatesEnabled(callback) should be replaced with
- * ble.gattServer().onUpdatesEnabled(callback).
- */
- void onUpdatesEnabled(GattServer::EventCallback_t callback) {
- gattServer().onUpdatesEnabled(callback);
- }
-
- /**
- * Set up a callback for when notifications or indications are disabled for a
- * characteristic on the local GattServer.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onUpdatesEnabled(callback) should be replaced with
- * ble.gattServer().onUpdatesEnabled(callback).
- */
- void onUpdatesDisabled(GattServer::EventCallback_t callback) {
- gattServer().onUpdatesDisabled(callback);
- }
-
- /**
- * Set up a callback for when the GATT server receives a response for an
- * indication event sent previously.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onConfirmationReceived(callback) should be replaced with
- * ble.gattServer().onConfirmationReceived(callback).
- */
- void onConfirmationReceived(GattServer::EventCallback_t callback) {
- gattServer().onConfirmationReceived(callback);
- }
-
- /**
- * Set up a callback for when the security setup procedure (key generation
- * and exchange) for a link has started. This will be skipped for bonded
- * devices. The callback is passed in parameters received from the peer's
- * security request: bool allowBonding, bool requireMITM, and
- * SecurityIOCapabilities_t.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.onSecuritySetupInitiated(callback) should be replaced with
- * ble.securityManager().onSecuritySetupInitiated(callback).
- */
- void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
- securityManager().onSecuritySetupInitiated(callback);
- }
-
- /**
- * Set up a callback for when the security setup procedure (key generation
- * and exchange) for a link has completed. This will be skipped for bonded
- * devices. The callback is passed in the success/failure status of the
- * security setup procedure.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.onSecuritySetupCompleted(callback) should be replaced with
- * ble.securityManager().onSecuritySetupCompleted(callback).
- */
- void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
- securityManager().onSecuritySetupCompleted(callback);
- }
-
- /**
- * Set up a callback for when a link with the peer is secured. For bonded
- * devices, subsequent reconnections with a bonded peer will result only in
- * this callback when the link is secured, and setup procedures will not
- * occur unless the bonding information is either lost or deleted on either
- * or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
- * to the level of security in effect for the secured link.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.onLinkSecured(callback) should be replaced with
- * ble.securityManager().onLinkSecured(callback).
- */
- void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
- securityManager().onLinkSecured(callback);
- }
-
- /**
- * Set up a callback for successful bonding, meaning that link-specific security
- * context is stored persistently for a peer device.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.onSecurityContextStored(callback) should be replaced with
- * ble.securityManager().onSecurityContextStored(callback).
- */
- void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
- securityManager().onSecurityContextStored(callback);
- }
-
- /**
- * Set up a callback for when the passkey needs to be displayed on a
- * peripheral with DISPLAY capability. This happens when security is
- * configured to prevent Man-In-The-Middle attacks, and the peers need to exchange
- * a passkey (or PIN) to authenticate the connection
- * attempt.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.onPasskeyDisplay(callback) should be replaced with
- * ble.securityManager().onPasskeyDisplay(callback).
- */
- void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
- return securityManager().onPasskeyDisplay(callback);
- }
-
-private:
- /**
- * Implementation of init() [internal to BLE_API].
- *
- * The implementation is separated into a private method because it isn't
- * suitable to be included in the header.
- */
- ble_error_t initImplementation(FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback);
-
-private:
- BLE(const BLE&);
- BLE &operator=(const BLE &);
-
-private:
- InstanceID_t instanceID;
- BLEInstanceBase *transport; /* The device-specific backend */
-};
-
-typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
- * code. Will be dropped at some point soon.*/
-
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __BLE_H__
+#define __BLE_H__
+
+#include "blecommon.h"
+#include "Gap.h"
+#include "GattServer.h"
+#include "GattClient.h"
+
+#include "ble/FunctionPointerWithContext.h"
+
+#ifdef YOTTA_CFG_MBED_OS
+#include "mbed-drivers/mbed_error.h"
+#else
+#include "mbed_error.h"
+#endif
+
+/* Forward declaration for the implementation class */
+class BLEInstanceBase;
+
+/**
+ * The base class used to abstract away BLE-capable radio transceivers or SOCs,
+ * so that the BLE API can work with any radio transparently.
+ */
+class BLE
+{
+public:
+ typedef unsigned InstanceID_t; /** The type returned by BLE::getInstanceID(). */
+
+ /**
+ * The context provided to init-completion-callbacks (see init() below).
+ *
+ * @param ble
+ * A reference to the BLE instance being initialized.
+ * @param error
+ * Captures the result of initialization. It is set to
+ * BLE_ERROR_NONE if initialization completed successfully. Else
+ * the error value is implementation specific.
+ */
+ struct InitializationCompleteCallbackContext {
+ BLE& ble; /* Reference to the BLE object that has been initialized */
+ ble_error_t error; /* Error status of the initialization. It is set to BLE_ERROR_NONE if initialization completed successfully. */
+ };
+
+ /**
+ * The signature for function-pointer like callbacks for initialization-completion.
+ *
+ * @note There are two versions of init(). In addition to the simple
+ * function-pointer, init() can also take a <Object, member> tuple as its
+ * callback target. In case of the latter, the following declaration doesn't apply.
+ */
+ typedef void (*InitializationCompleteCallback_t)(InitializationCompleteCallbackContext *context);
+
+ /**
+ * Initialize the BLE controller. This should be called before using
+ * anything else in the BLE_API.
+ *
+ * init() hands control to the underlying BLE module to accomplish
+ * initialization. This initialization may tacitly depend on other hardware
+ * setup (such as clocks or power-modes) that happens early on during
+ * system startup. It may not be safe to call init() from a global static
+ * context where ordering is compiler-specific and can't be guaranteed - it
+ * is safe to call BLE::init() from within main().
+ *
+ * @param initCompleteCallback
+ * A callback for when initialization completes for a BLE
+ * instance. This is an optional parameter; if no callback is
+ * set up the application can still determine the status of
+ * initialization using BLE::hasInitialized() (see below).
+ *
+ * @return BLE_ERROR_NONE if the initialization procedure was started
+ * successfully.
+ *
+ * @note If init() returns BLE_ERROR_NONE, the underlying stack must invoke
+ * the initialization completion callback at some point.
+ *
+ * @note In some cases, initialization is instantaneous (or blocking); if
+ * so, it is acceptable for the stack-specific implementation of init()
+ * to invoke the completion callback directly (within its own
+ * context).
+ *
+ * @note Nearly all BLE APIs would return
+ * BLE_ERROR_INITIALIZATION_INCOMPLETE if used on an instance before the
+ * corresponding transport is initialized.
+ *
+ * @note There are two versions of init(). In addition to the simple
+ * function-pointer, init() can also take an <Object, member> tuple as its
+ * callback target.
+ */
+ ble_error_t init(InitializationCompleteCallback_t initCompleteCallback = NULL) {
+ FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(initCompleteCallback);
+ return initImplementation(callback);
+ }
+
+ /**
+ * An alternate declaration for init(). This one takes an <Object, member> tuple as its
+ * callback target.
+ */
+ template<typename T>
+ ble_error_t init(T *object, void (T::*initCompleteCallback)(InitializationCompleteCallbackContext *context)) {
+ FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(object, initCompleteCallback);
+ return initImplementation(callback);
+ }
+
+ /**
+ * @return true if initialization has completed for the underlying BLE
+ * transport.
+ *
+ * The application can set up a callback to signal completion of
+ * initialization when using init(). Otherwise, this method can be used to
+ * poll the state of initialization.
+ */
+ bool hasInitialized(void) const;
+
+ /**
+ * Purge the BLE stack of GATT and GAP state. init() must be called
+ * afterwards to re-instate services and GAP state. This API offers a way to
+ * repopulate the GATT database with new services and characteristics.
+ */
+ ble_error_t shutdown(void);
+
+ /**
+ * This call allows the application to get the BLE stack version information.
+ *
+ * @return A pointer to a const string representing the version.
+ * Note: The string is owned by BLE_API.
+ */
+ const char *getVersion(void);
+
+ /*
+ * Accessors to GAP. Please refer to Gap.h. All GAP related functionality requires
+ * going through this accessor.
+ */
+ const Gap &gap() const;
+ Gap &gap();
+
+ /*
+ * Accessors to GATT Server. Please refer to GattServer.h. All GATTServer related
+ * functionality requires going through this accessor.
+ */
+ const GattServer& gattServer() const;
+ GattServer& gattServer();
+
+ /*
+ * Accessors to GATT Client. Please refer to GattClient.h. All GATTClient related
+ * functionality requires going through this accessor.
+ */
+ const GattClient& gattClient() const;
+ GattClient& gattClient();
+
+ /*
+ * Accessors to Security Manager. Please refer to SecurityManager.h. All
+ * SecurityManager related functionality requires going through this
+ * accessor.
+ */
+ const SecurityManager& securityManager() const;
+ SecurityManager& securityManager();
+
+ /**
+ * Yield control to the BLE stack or to other tasks waiting for events. This
+ * is a sleep function that will return when there is an application-specific
+ * interrupt, but the MCU might wake up several times before
+ * returning (to service the stack). This is not always interchangeable with
+ * WFE().
+ */
+ void waitForEvent(void);
+
+public:
+ static const InstanceID_t DEFAULT_INSTANCE = 0;
+#ifndef YOTTA_CFG_BLE_INSTANCES_COUNT
+ static const InstanceID_t NUM_INSTANCES = 1;
+#else
+ static const InstanceID_t NUM_INSTANCES = YOTTA_CFG_BLE_INSTANCES_COUNT;
+#endif
+
+ /**
+ * Get a reference to the BLE singleton corresponding to a given interface.
+ * There is a static array of BLE singletons.
+ *
+ * @Note: Calling Instance() is preferred over constructing a BLE object
+ * directly, as it returns references to singletons.
+ *
+ * @param[in] id
+ * Instance-ID. This should be less than NUM_INSTANCES
+ * for the returned BLE singleton to be useful.
+ *
+ * @return a reference to a single object.
+ */
+ static BLE &Instance(InstanceID_t id = DEFAULT_INSTANCE);
+
+ /**
+ * Constructor for a handle to a BLE instance (the BLE stack). BLE handles
+ * are thin wrappers around a transport object (that is, ptr. to
+ * BLEInstanceBase).
+ *
+ * It is better to create BLE objects as singletons accessed through the
+ * Instance() method. If multiple BLE handles are constructed for the same
+ * interface (using this constructor), they will share the same underlying
+ * transport object.
+ */
+ BLE(InstanceID_t instanceID = DEFAULT_INSTANCE);
+
+ /**
+ * Fetch the ID of a BLE instance. Typically there would only be the DEFAULT_INSTANCE.
+ */
+ InstanceID_t getInstanceID(void) const {
+ return instanceID;
+ }
+
+ /*
+ * Deprecation alert!
+ * All of the following are deprecated and may be dropped in a future
+ * release. Documentation should refer to alternative APIs.
+ */
+
+ /* GAP specific APIs. */
+public:
+ /**
+ * Set the BTLE MAC address and type.
+ * @return BLE_ERROR_NONE on success.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.setAddress(...) should be replaced with
+ * ble.gap().setAddress(...).
+ */
+ ble_error_t setAddress(Gap::AddressType_t type, const Gap::Address_t address) {
+ return gap().setAddress(type, address);
+ }
+
+ /**
+ * Fetch the BTLE MAC address and type.
+ * @return BLE_ERROR_NONE on success.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.getAddress(...) should be replaced with
+ * ble.gap().getAddress(...).
+ */
+ ble_error_t getAddress(Gap::AddressType_t *typeP, Gap::Address_t address) {
+ return gap().getAddress(typeP, address);
+ }
+
+ /**
+ * Set the GAP advertising mode to use for this device.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.setAdvertisingType(...) should be replaced with
+ * ble.gap().setAdvertisingType(...).
+ */
+ void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
+ gap().setAdvertisingType(advType);
+ }
+
+ /**
+ * @param[in] interval
+ * Advertising interval in units of milliseconds. Advertising
+ * is disabled if interval is 0. If interval is smaller than
+ * the minimum supported value, then the minimum supported
+ * value is used instead. This minimum value can be discovered
+ * using getMinAdvertisingInterval().
+ *
+ * This field must be set to 0 if connectionMode is equal
+ * to ADV_CONNECTABLE_DIRECTED.
+ *
+ * @note: Decreasing this value allows central devices to detect a
+ * peripheral faster, at the expense of more power being used by the radio
+ * due to the higher data transmit rate.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.setAdvertisingInterval(...) should be replaced with
+ * ble.gap().setAdvertisingInterval(...).
+ *
+ * @note: [WARNING] This API previously used 0.625ms as the unit for its
+ * 'interval' argument. That required an explicit conversion from
+ * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
+ * no longer required as the new units are milliseconds. Any application
+ * code depending on the old semantics needs to be updated accordingly.
+ */
+ void setAdvertisingInterval(uint16_t interval) {
+ gap().setAdvertisingInterval(interval);
+ }
+
+ /**
+ * @return Minimum Advertising interval in milliseconds.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.getMinAdvertisingInterval(...) should be replaced with
+ * ble.gap().getMinAdvertisingInterval(...).
+ */
+ uint16_t getMinAdvertisingInterval(void) const {
+ return gap().getMinAdvertisingInterval();
+ }
+
+ /**
+ * @return Minimum Advertising interval in milliseconds for non-connectible mode.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
+ * ble.gap().getMinNonConnectableAdvertisingInterval(...).
+ */
+ uint16_t getMinNonConnectableAdvertisingInterval(void) const {
+ return gap().getMinNonConnectableAdvertisingInterval();
+ }
+
+ /**
+ * @return Maximum Advertising interval in milliseconds.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.getMaxAdvertisingInterval(...) should be replaced with
+ * ble.gap().getMaxAdvertisingInterval(...).
+ */
+ uint16_t getMaxAdvertisingInterval(void) const {
+ return gap().getMaxAdvertisingInterval();
+ }
+
+ /**
+ * @param[in] timeout
+ * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
+ * and 16383). Use 0 to disable the advertising timeout.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.setAdvertisingTimeout(...) should be replaced with
+ * ble.gap().setAdvertisingTimeout(...).
+ */
+ void setAdvertisingTimeout(uint16_t timeout) {
+ gap().setAdvertisingTimeout(timeout);
+ }
+
+ /**
+ * Set up a particular, user-constructed set of advertisement parameters for
+ * the underlying stack. It would be uncommon for this API to be used
+ * directly; there are other APIs to tweak advertisement parameters
+ * individually (see above).
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.setAdvertisingParams(...) should be replaced with
+ * ble.gap().setAdvertisingParams(...).
+ */
+ void setAdvertisingParams(const GapAdvertisingParams &advParams) {
+ gap().setAdvertisingParams(advParams);
+ }
+
+ /**
+ * @return Read back advertising parameters. Useful for storing and
+ * restoring parameters rapidly.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.getAdvertisingParams(...) should be replaced with
+ * ble.gap().getAdvertisingParams(...).
+ */
+ const GapAdvertisingParams &getAdvertisingParams(void) const {
+ return gap().getAdvertisingParams();
+ }
+
+ /**
+ * Accumulate an AD structure in the advertising payload. Please note that
+ * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
+ * as an additional 31 bytes if the advertising payload is too
+ * small.
+ *
+ * @param[in] flags
+ * The flags to add. Please refer to
+ * GapAdvertisingData::Flags for valid flags. Multiple
+ * flags may be specified in combination.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.accumulateAdvertisingPayload(flags) should be replaced with
+ * ble.gap().accumulateAdvertisingPayload(flags).
+ */
+ ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
+ return gap().accumulateAdvertisingPayload(flags);
+ }
+
+ /**
+ * Accumulate an AD structure in the advertising payload. Please note that
+ * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
+ * as an additional 31 bytes if the advertising payload is too
+ * small.
+ *
+ * @param[in] app
+ * The appearance of the peripheral.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.accumulateAdvertisingPayload(appearance) should be replaced with
+ * ble.gap().accumulateAdvertisingPayload(appearance).
+ */
+ ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
+ return gap().accumulateAdvertisingPayload(app);
+ }
+
+ /**
+ * Accumulate an AD structure in the advertising payload. Please note that
+ * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
+ * as an additional 31 bytes if the advertising payload is too
+ * small.
+ *
+ * @param[in] app
+ * The max transmit power to be used by the controller. This
+ * is only a hint.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
+ * ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
+ */
+ ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
+ return gap().accumulateAdvertisingPayloadTxPower(power);
+ }
+
+ /**
+ * Accumulate a variable length byte-stream as an AD structure in the
+ * advertising payload. Please note that the payload is limited to 31 bytes.
+ * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
+ * advertising payload is too small.
+ *
+ * @param type The type that describes the variable length data.
+ * @param data Data bytes.
+ * @param len Data length.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.accumulateAdvertisingPayload(...) should be replaced with
+ * ble.gap().accumulateAdvertisingPayload(...).
+ */
+ ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
+ return gap().accumulateAdvertisingPayload(type, data, len);
+ }
+
+ /**
+ * Setup a particular, user-constructed advertisement payload for the
+ * underlying stack. It would be uncommon for this API to be used directly;
+ * there are other APIs to build an advertisement payload (see above).
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.setAdvertisingData(...) should be replaced with
+ * ble.gap().setAdvertisingPayload(...).
+ */
+ ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
+ return gap().setAdvertisingPayload(advData);
+ }
+
+ /**
+ * @return Read back advertising data. Useful for storing and
+ * restoring payload.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.getAdvertisingData(...) should be replaced with
+ * ble.gap().getAdvertisingPayload()(...).
+ */
+ const GapAdvertisingData &getAdvertisingData(void) const {
+ return gap().getAdvertisingPayload();
+ }
+
+ /**
+ * Reset any advertising payload prepared from prior calls to
+ * accumulateAdvertisingPayload(). This automatically propagates the re-
+ * initialized advertising payload to the underlying stack.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.clearAdvertisingPayload(...) should be replaced with
+ * ble.gap().clearAdvertisingPayload(...).
+ */
+ void clearAdvertisingPayload(void) {
+ gap().clearAdvertisingPayload();
+ }
+
+ /**
+ * This API is *deprecated* and resolves to a no-operation. It is left here
+ * to allow older code to compile. Please avoid using this API in new code.
+ * This API will be dropped in a future release.
+ *
+ * Formerly, it would be used to dynamically reset the accumulated advertising
+ * payload and scanResponse; to do this, the application would clear and re-
+ * accumulate a new advertising payload (and scanResponse) before using this
+ * API. Updates to the underlying advertisement payload now happen
+ * implicitly.
+ */
+ ble_error_t setAdvertisingPayload(void) {
+ return BLE_ERROR_NONE;
+ }
+
+ /**
+ * Accumulate a variable length byte-stream as an AD structure in the
+ * scanResponse payload.
+ *
+ * @param[in] type The type that describes the variable length data.
+ * @param[in] data Data bytes.
+ * @param[in] len Data length.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.accumulateScanResponse(...) should be replaced with
+ * ble.gap().accumulateScanResponse(...).
+ */
+ ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
+ return gap().accumulateScanResponse(type, data, len);
+ }
+
+ /**
+ * Reset any scan response prepared from prior calls to
+ * accumulateScanResponse().
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.clearScanResponse(...) should be replaced with
+ * ble.gap().clearScanResponse(...).
+ */
+ void clearScanResponse(void) {
+ gap().clearScanResponse();
+ }
+
+ /**
+ * Start advertising.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.startAdvertising(...) should be replaced with
+ * ble.gap().startAdvertising(...).
+ */
+ ble_error_t startAdvertising(void) {
+ return gap().startAdvertising();
+ }
+
+ /**
+ * Stop advertising.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.stopAdvertising(...) should be replaced with
+ * ble.gap().stopAdvertising(...).
+ */
+ ble_error_t stopAdvertising(void) {
+ return gap().stopAdvertising();
+ }
+
+ /**
+ * Set up parameters for GAP scanning (observer mode).
+ * @param[in] interval
+ * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
+ * @param[in] window
+ * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
+ * @param[in] timeout
+ * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
+ * @param[in] activeScanning
+ * Set to True if active-scanning is required. This is used to fetch the
+ * scan response from a peer if possible.
+ *
+ * The scanning window divided by the interval determines the duty cycle for
+ * scanning. For example, if the interval is 100ms and the window is 10ms,
+ * then the controller will scan for 10 percent of the time. It is possible
+ * to have the interval and window set to the same value. In this case,
+ * scanning is continuous, with a change of scanning frequency once every
+ * interval.
+ *
+ * Once the scanning parameters have been configured, scanning can be
+ * enabled by using startScan().
+ *
+ * @Note: The scan interval and window are recommendations to the BLE stack.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.setScanParams(...) should be replaced with
+ * ble.gap().setScanParams(...).
+ */
+ ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
+ uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
+ uint16_t timeout = 0,
+ bool activeScanning = false) {
+ return gap().setScanParams(interval, window, timeout, activeScanning);
+ }
+
+ /**
+ * Set up the scanInterval parameter for GAP scanning (observer mode).
+ * @param[in] interval
+ * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
+ *
+ * The scanning window divided by the interval determines the duty cycle for
+ * scanning. For example, if the interval is 100ms and the window is 10ms,
+ * then the controller will scan for 10 percent of the time. It is possible
+ * to have the interval and window set to the same value. In this case,
+ * scanning is continuous, with a change of scanning frequency once every
+ * interval.
+ *
+ * Once the scanning parameters have been configured, scanning can be
+ * enabled by using startScan().
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.setScanInterval(interval) should be replaced with
+ * ble.gap().setScanInterval(interval).
+ */
+ ble_error_t setScanInterval(uint16_t interval) {
+ return gap().setScanInterval(interval);
+ }
+
+ /**
+ * Set up the scanWindow parameter for GAP scanning (observer mode).
+ * @param[in] window
+ * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
+ *
+ * The scanning window divided by the interval determines the duty cycle for
+ * scanning. For example, if the interval is 100ms and the window is 10ms,
+ * then the controller will scan for 10 percent of the time. It is possible
+ * to have the interval and window set to the same value. In this case,
+ * scanning is continuous, with a change of scanning frequency once every
+ * interval.
+ *
+ * Once the scanning parameters have been configured, scanning can be
+ * enabled by using startScan().
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.setScanWindow(window) should be replaced with
+ * ble.gap().setScanWindow(window).
+ */
+ ble_error_t setScanWindow(uint16_t window) {
+ return gap().setScanWindow(window);
+ }
+
+ /**
+ * Set up parameters for GAP scanning (observer mode).
+ * @param[in] timeout
+ * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
+ *
+ * The scanning window divided by the interval determines the duty cycle for
+ * scanning. For example, if the interval is 100ms and the window is 10ms,
+ * then the controller will scan for 10 percent of the time. It is possible
+ * to have the interval and window set to the same value. In this case,
+ * scanning is continuous, with a change of scanning frequency once every
+ * interval.
+ *
+ * Once the scanning parameters have been configured, scanning can be
+ * enabled by using startScan().
+ *
+ * @Note: The scan interval and window are recommendations to the BLE stack.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.setScanTimeout(...) should be replaced with
+ * ble.gap().setScanTimeout(...).
+ */
+ ble_error_t setScanTimeout(uint16_t timeout) {
+ return gap().setScanTimeout(timeout);
+ }
+
+ /**
+ * Set up parameters for GAP scanning (observer mode).
+ * @param[in] activeScanning
+ * Set to True if active-scanning is required. This is used to fetch the
+ * scan response from a peer if possible.
+ *
+ * Once the scanning parameters have been configured, scanning can be
+ * enabled by using startScan().
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.setActiveScan(...) should be replaced with
+ * ble.gap().setActiveScanning(...).
+ */
+ void setActiveScan(bool activeScanning) {
+ gap().setActiveScanning(activeScanning);
+ }
+
+ /**
+ * Start scanning (Observer Procedure) based on the parameters currently in
+ * effect.
+ *
+ * @param[in] callback
+ * The application-specific callback to be invoked upon
+ * receiving every advertisement report. This can be passed in
+ * as NULL, in which case scanning may not be enabled at all.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.startScan(callback) should be replaced with
+ * ble.gap().startScan(callback).
+ */
+ ble_error_t startScan(void (*callback)(const Gap::AdvertisementCallbackParams_t *params)) {
+ return gap().startScan(callback);
+ }
+
+ /**
+ * Same as above, but this takes an (object, method) pair for a callback.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.startScan(callback) should be replaced with
+ * ble.gap().startScan(object, callback).
+ */
+ template<typename T>
+ ble_error_t startScan(T *object, void (T::*memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
+
+ /**
+ * Stop scanning. The current scanning parameters remain in effect.
+ *
+ * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.stopScan() should be replaced with
+ * ble.gap().stopScan().
+ */
+ ble_error_t stopScan(void) {
+ return gap().stopScan();
+ }
+
+ /**
+ * Create a connection (GAP Link Establishment).
+ * @param peerAddr
+ * 48-bit address, LSB format.
+ * @param peerAddrType
+ * Address type of the peer.
+ * @param connectionParams
+ * Connection parameters.
+ * @param scanParams
+ * Paramters to use while scanning for the peer.
+ * @return BLE_ERROR_NONE if connection establishment procedure is started
+ * successfully. The onConnection callback (if set) is invoked upon
+ * a connection event.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.connect(...) should be replaced with
+ * ble.gap().connect(...).
+ */
+ ble_error_t connect(const Gap::Address_t peerAddr,
+ Gap::AddressType_t peerAddrType = Gap::ADDR_TYPE_RANDOM_STATIC,
+ const Gap::ConnectionParams_t *connectionParams = NULL,
+ const GapScanningParams *scanParams = NULL) {
+ return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
+ }
+
+ /**
+ * This call initiates the disconnection procedure, and its completion is
+ * communicated to the application with an invocation of the
+ * onDisconnection callback.
+ *
+ * @param[in] connectionHandle
+ * @param[in] reason
+ * The reason for disconnection; sent back to the peer.
+ */
+ ble_error_t disconnect(Gap::Handle_t connectionHandle, Gap::DisconnectionReason_t reason) {
+ return gap().disconnect(connectionHandle, reason);
+ }
+
+ /**
+ * This call initiates the disconnection procedure, and its completion
+ * is communicated to the application with an invocation of the
+ * onDisconnection callback.
+ *
+ * @param reason
+ * The reason for disconnection; sent back to the peer.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.disconnect(reason) should be replaced with
+ * ble.gap().disconnect(reason).
+ *
+ * @note: This version of disconnect() doesn't take a connection handle. It
+ * works reliably only for stacks that are limited to a single
+ * connection. This API should be considered *deprecated* in favour of the
+ * alternative, which takes a connection handle. It will be dropped in the future.
+ */
+ ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
+ return gap().disconnect(reason);
+ }
+
+ /**
+ * Returns the current GAP state of the device using a bitmask that
+ * describes whether the device is advertising or connected.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.getGapState() should be replaced with
+ * ble.gap().getState().
+ */
+ Gap::GapState_t getGapState(void) const {
+ return gap().getState();
+ }
+
+ /**
+ * Get the GAP peripheral's preferred connection parameters. These are the
+ * defaults that the peripheral would like to have in a connection. The
+ * choice of the connection parameters is eventually up to the central.
+ *
+ * @param[out] params
+ * The structure where the parameters will be stored. Memory
+ * for this is owned by the caller.
+ *
+ * @return BLE_ERROR_NONE if the parameters were successfully filled into
+ * the given structure pointed to by params.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.getPreferredConnectionParams() should be replaced with
+ * ble.gap().getPreferredConnectionParams().
+ */
+ ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
+ return gap().getPreferredConnectionParams(params);
+ }
+
+ /**
+ * Set the GAP peripheral's preferred connection parameters. These are the
+ * defaults that the peripheral would like to have in a connection. The
+ * choice of the connection parameters is eventually up to the central.
+ *
+ * @param[in] params
+ * The structure containing the desired parameters.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.setPreferredConnectionParams() should be replaced with
+ * ble.gap().setPreferredConnectionParams().
+ */
+ ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
+ return gap().setPreferredConnectionParams(params);
+ }
+
+ /**
+ * Update connection parameters while in the peripheral role.
+ * @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
+ * the central to perform the procedure.
+ * @param[in] handle
+ * Connection Handle
+ * @param[in] params
+ * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
+ * the parameters in the PPCP characteristic of the GAP service will be used instead.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.updateConnectionParams() should be replaced with
+ * ble.gap().updateConnectionParams().
+ */
+ ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
+ return gap().updateConnectionParams(handle, params);
+ }
+
+ /**
+ * Set the device name characteristic in the GAP service.
+ * @param[in] deviceName
+ * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.setDeviceName() should be replaced with
+ * ble.gap().setDeviceName().
+ */
+ ble_error_t setDeviceName(const uint8_t *deviceName) {
+ return gap().setDeviceName(deviceName);
+ }
+
+ /**
+ * Get the value of the device name characteristic in the GAP service.
+ * @param[out] deviceName
+ * Pointer to an empty buffer where the UTF-8 *non NULL-
+ * terminated* string will be placed. Set this
+ * value to NULL in order to obtain the deviceName-length
+ * from the 'length' parameter.
+ *
+ * @param[in/out] lengthP
+ * (on input) Length of the buffer pointed to by deviceName;
+ * (on output) the complete device name length (without the
+ * null terminator).
+ *
+ * @note If the device name is longer than the size of the supplied buffer,
+ * length will return the complete device name length, and not the
+ * number of bytes actually returned in deviceName. The application may
+ * use this information to retry with a suitable buffer size.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.getDeviceName() should be replaced with
+ * ble.gap().getDeviceName().
+ */
+ ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
+ return gap().getDeviceName(deviceName, lengthP);
+ }
+
+ /**
+ * Set the appearance characteristic in the GAP service.
+ * @param[in] appearance
+ * The new value for the device-appearance.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.setAppearance() should be replaced with
+ * ble.gap().setAppearance().
+ */
+ ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
+ return gap().setAppearance(appearance);
+ }
+
+ /**
+ * Get the appearance characteristic in the GAP service.
+ * @param[out] appearance
+ * The new value for the device-appearance.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.getAppearance() should be replaced with
+ * ble.gap().getAppearance().
+ */
+ ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
+ return gap().getAppearance(appearanceP);
+ }
+
+ /**
+ * Set the radio's transmit power.
+ * @param[in] txPower Radio transmit power in dBm.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.setTxPower() should be replaced with
+ * ble.gap().setTxPower().
+ */
+ ble_error_t setTxPower(int8_t txPower) {
+ return gap().setTxPower(txPower);
+ }
+
+ /**
+ * Query the underlying stack for permitted arguments for setTxPower().
+ *
+ * @param[out] valueArrayPP
+ * Out parameter to receive the immutable array of Tx values.
+ * @param[out] countP
+ * Out parameter to receive the array's size.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.getPermittedTxPowerValues() should be replaced with
+ * ble.gap().getPermittedTxPowerValues().
+ */
+ void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
+ gap().getPermittedTxPowerValues(valueArrayPP, countP);
+ }
+
+ /**
+ * Add a service declaration to the local server ATT table. Also add the
+ * characteristics contained within.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from GattServer directly. A former call
+ * to ble.addService() should be replaced with
+ * ble.gattServer().addService().
+ */
+ ble_error_t addService(GattService &service) {
+ return gattServer().addService(service);
+ }
+
+ /**
+ * Read the value of a characteristic from the local GattServer.
+ * @param[in] attributeHandle
+ * Attribute handle for the value attribute of the characteristic.
+ * @param[out] buffer
+ * A buffer to hold the value being read.
+ * @param[in/out] lengthP
+ * Length of the buffer being supplied. If the attribute
+ * value is longer than the size of the supplied buffer,
+ * this variable will return the total attribute value length
+ * (excluding offset). The application may use this
+ * information to allocate a suitable buffer size.
+ *
+ * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from GattServer directly. A former call
+ * to ble.readCharacteristicValue() should be replaced with
+ * ble.gattServer().read().
+ */
+ ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
+ return gattServer().read(attributeHandle, buffer, lengthP);
+ }
+
+ /**
+ * Read the value of a characteristic from the local GattServer.
+ * @param[in] connectionHandle
+ * Connection Handle.
+ * @param[in] attributeHandle
+ * Attribute handle for the value attribute of the characteristic.
+ * @param[out] buffer
+ * A buffer to hold the value being read.
+ * @param[in/out] lengthP
+ * Length of the buffer being supplied. If the attribute
+ * value is longer than the size of the supplied buffer,
+ * this variable will return the total attribute value length
+ * (excluding offset). The application may use this
+ * information to allocate a suitable buffer size.
+ *
+ * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
+ *
+ * @note This API is a version of the above, with an additional connection handle
+ * parameter to allow fetches for connection-specific multivalued
+ * attributes (such as the CCCDs).
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from GattServer directly. A former call
+ * to ble.readCharacteristicValue() should be replaced with
+ * ble.gattServer().read().
+ */
+ ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
+ return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
+ }
+
+ /**
+ * Update the value of a characteristic on the local GattServer.
+ *
+ * @param[in] attributeHandle
+ * Handle for the value attribute of the characteristic.
+ * @param[in] value
+ * A pointer to a buffer holding the new value.
+ * @param[in] size
+ * Size of the new value (in bytes).
+ * @param[in] localOnly
+ * Should this update be kept on the local
+ * GattServer regardless of the state of the
+ * notify/indicate flag in the CCCD for this
+ * characteristic? If set to true, no notification
+ * or indication is generated.
+ *
+ * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from GattServer directly. A former call
+ * to ble.updateCharacteristicValue() should be replaced with
+ * ble.gattServer().write().
+ */
+ ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
+ const uint8_t *value,
+ uint16_t size,
+ bool localOnly = false) {
+ return gattServer().write(attributeHandle, value, size, localOnly);
+ }
+
+ /**
+ * Update the value of a characteristic on the local GattServer. A version
+ * of the above, with a connection handle parameter to allow updates
+ * for connection-specific multivalued attributes (such as the CCCDs).
+ *
+ * @param[in] connectionHandle
+ * Connection Handle.
+ * @param[in] attributeHandle
+ * Handle for the value attribute of the Characteristic.
+ * @param[in] value
+ * A pointer to a buffer holding the new value.
+ * @param[in] size
+ * Size of the new value (in bytes).
+ * @param[in] localOnly
+ * Should this update be kept on the local
+ * GattServer regardless of the state of the
+ * notify/indicate flag in the CCCD for this
+ * Characteristic? If set to true, no notification
+ * or indication is generated.
+ *
+ * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from GattServer directly. A former call
+ * to ble.updateCharacteristicValue() should be replaced with
+ * ble.gattServer().write().
+ */
+ ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
+ GattAttribute::Handle_t attributeHandle,
+ const uint8_t *value,
+ uint16_t size,
+ bool localOnly = false) {
+ return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
+ }
+
+ /**
+ * Enable the BLE stack's Security Manager. The Security Manager implements
+ * the cryptographic algorithms and protocol exchanges that allow two
+ * devices to securely exchange data and privately detect each other.
+ * Calling this API is a prerequisite for encryption and pairing (bonding).
+ *
+ * @param[in] enableBonding Allow for bonding.
+ * @param[in] requireMITM Require protection against man-in-the-middle attacks.
+ * @param[in] iocaps To specify the I/O capabilities of this peripheral,
+ * such as availability of a display or keyboard, to
+ * support out-of-band exchanges of security data.
+ * @param[in] passkey To specify a static passkey.
+ *
+ * @return BLE_ERROR_NONE on success.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from SecurityManager directly. A former
+ * call to ble.initializeSecurity(...) should be replaced with
+ * ble.securityManager().init(...).
+ */
+ ble_error_t initializeSecurity(bool enableBonding = true,
+ bool requireMITM = true,
+ SecurityManager::SecurityIOCapabilities_t iocaps = SecurityManager::IO_CAPS_NONE,
+ const SecurityManager::Passkey_t passkey = NULL) {
+ return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
+ }
+
+ /**
+ * Get the security status of a connection.
+ *
+ * @param[in] connectionHandle Handle to identify the connection.
+ * @param[out] securityStatusP Security status.
+ *
+ * @return BLE_SUCCESS or appropriate error code indicating the reason of failure.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from SecurityManager directly. A former
+ * call to ble.getLinkSecurity(...) should be replaced with
+ * ble.securityManager().getLinkSecurity(...).
+ */
+ ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
+ return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
+ }
+
+ /**
+ * Delete all peer device context and all related bonding information from
+ * the database within the security manager.
+ *
+ * @retval BLE_ERROR_NONE On success; else returns an error code indicating the reason for the failure.
+ * @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization or
+ * application registration.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from SecurityManager directly. A former
+ * call to ble.purgeAllBondingState() should be replaced with
+ * ble.securityManager().purgeAllBondingState().
+ */
+ ble_error_t purgeAllBondingState(void) {
+ return securityManager().purgeAllBondingState();
+ }
+
+ /**
+ * Set up a callback for timeout events. Refer to Gap::TimeoutSource_t for
+ * possible event types.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call
+ * to ble.onTimeout(callback) should be replaced with
+ * ble.gap().onTimeout(callback).
+ */
+ void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
+ gap().onTimeout(timeoutCallback);
+ }
+
+ /**
+ * Set up a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call
+ * to ble.onConnection(callback) should be replaced with
+ * ble.gap().onConnection(callback).
+ */
+ void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
+ gap().onConnection(connectionCallback);
+ }
+
+ /**
+ * Append to a chain of callbacks to be invoked upon GAP disconnection.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call
+ * to ble.onDisconnection(callback) should be replaced with
+ * ble.gap().onDisconnection(callback).
+ */
+ void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
+ gap().onDisconnection(disconnectionCallback);
+ }
+
+ template<typename T>
+ void onDisconnection(T *tptr, void (T::*mptr)(const Gap::DisconnectionCallbackParams_t*)) {
+ gap().onDisconnection(tptr, mptr);
+ }
+
+ /**
+ * Radio Notification is a feature that enables ACTIVE and INACTIVE
+ * (nACTIVE) signals from the stack. These notify the application when the
+ * radio is in use. The signal is sent using software interrupt.
+ *
+ * The ACTIVE signal is sent before the radio event starts. The nACTIVE
+ * signal is sent at the end of the radio event. These signals can be used
+ * by the application programmer to synchronize application logic with radio
+ * activity. For example, the ACTIVE signal can be used to shut off external
+ * devices to manage peak current drawn during periods when the radio is on,
+ * or to trigger sensor data collection for transmission in the radio event.
+ *
+ * @param callback
+ * The application handler to be invoked in response to a radio
+ * ACTIVE/INACTIVE event.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call
+ * to ble.onRadioNotification(...) should be replaced with
+ * ble.gap().onRadioNotification(...).
+ */
+ void onRadioNotification(void (*callback)(bool)) {
+ gap().onRadioNotification(callback);
+ }
+
+ /**
+ * Add a callback for the GATT event DATA_SENT (which is triggered when
+ * updates are sent out by GATT in the form of notifications).
+ *
+ * @Note: It is possible to chain together multiple onDataSent callbacks
+ * (potentially from different modules of an application) to receive updates
+ * to characteristics.
+ *
+ * @Note: It is also possible to set up a callback into a member function of
+ * some object.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from GattServer directly. A former call
+ * to ble.onDataSent(...) should be replaced with
+ * ble.gattServer().onDataSent(...).
+ */
+ void onDataSent(void (*callback)(unsigned count)) {
+ gattServer().onDataSent(callback);
+ }
+ template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
+ gattServer().onDataSent(objPtr, memberPtr);
+ }
+
+ /**
+ * Set up a callback for when an attribute has its value updated by or at the
+ * connected peer. For a peripheral, this callback is triggered when the local
+ * GATT server has an attribute updated by a write command from the peer.
+ * For a Central, this callback is triggered when a response is received for
+ * a write request.
+ *
+ * @Note: It is possible to chain together multiple onDataWritten callbacks
+ * (potentially from different modules of an application) to receive updates
+ * to characteristics. Many services, such as DFU and UART, add their own
+ * onDataWritten callbacks behind the scenes to trap interesting events.
+ *
+ * @Note: It is also possible to set up a callback into a member function of
+ * some object.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from GattServer directly. A former call
+ * to ble.onDataWritten(...) should be replaced with
+ * ble.gattServer().onDataWritten(...).
+ */
+ void onDataWritten(void (*callback)(const GattWriteCallbackParams *eventDataP)) {
+ gattServer().onDataWritten(callback);
+ }
+ template <typename T> void onDataWritten(T * objPtr, void (T::*memberPtr)(const GattWriteCallbackParams *context)) {
+ gattServer().onDataWritten(objPtr, memberPtr);
+ }
+
+ /**
+ * Set up a callback to be invoked on the peripheral when an attribute is
+ * being read by a remote client.
+ *
+ * @Note: This functionality may not be available on all underlying stacks.
+ * You could use GattCharacteristic::setReadAuthorizationCallback() as an
+ * alternative.
+ *
+ * @Note: It is possible to chain together multiple onDataRead callbacks
+ * (potentially from different modules of an application) to receive updates
+ * to characteristics. Services may add their own onDataRead callbacks
+ * behind the scenes to trap interesting events.
+ *
+ * @Note: It is also possible to set up a callback into a member function of
+ * some object.
+ *
+ * @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
+ * else BLE_ERROR_NONE.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from GattServer directly. A former call
+ * to ble.onDataRead(...) should be replaced with
+ * ble.gattServer().onDataRead(...).
+ */
+ ble_error_t onDataRead(void (*callback)(const GattReadCallbackParams *eventDataP)) {
+ return gattServer().onDataRead(callback);
+ }
+ template <typename T> ble_error_t onDataRead(T * objPtr, void (T::*memberPtr)(const GattReadCallbackParams *context)) {
+ return gattServer().onDataRead(objPtr, memberPtr);
+ }
+
+ /**
+ * Set up a callback for when notifications or indications are enabled for a
+ * characteristic on the local GattServer.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from GattServer directly. A former call
+ * to ble.onUpdatesEnabled(callback) should be replaced with
+ * ble.gattServer().onUpdatesEnabled(callback).
+ */
+ void onUpdatesEnabled(GattServer::EventCallback_t callback) {
+ gattServer().onUpdatesEnabled(callback);
+ }
+
+ /**
+ * Set up a callback for when notifications or indications are disabled for a
+ * characteristic on the local GattServer.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from GattServer directly. A former call
+ * to ble.onUpdatesEnabled(callback) should be replaced with
+ * ble.gattServer().onUpdatesEnabled(callback).
+ */
+ void onUpdatesDisabled(GattServer::EventCallback_t callback) {
+ gattServer().onUpdatesDisabled(callback);
+ }
+
+ /**
+ * Set up a callback for when the GATT server receives a response for an
+ * indication event sent previously.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from GattServer directly. A former call
+ * to ble.onConfirmationReceived(callback) should be replaced with
+ * ble.gattServer().onConfirmationReceived(callback).
+ */
+ void onConfirmationReceived(GattServer::EventCallback_t callback) {
+ gattServer().onConfirmationReceived(callback);
+ }
+
+ /**
+ * Set up a callback for when the security setup procedure (key generation
+ * and exchange) for a link has started. This will be skipped for bonded
+ * devices. The callback is passed in parameters received from the peer's
+ * security request: bool allowBonding, bool requireMITM, and
+ * SecurityIOCapabilities_t.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from SecurityManager directly. A former
+ * call to ble.onSecuritySetupInitiated(callback) should be replaced with
+ * ble.securityManager().onSecuritySetupInitiated(callback).
+ */
+ void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
+ securityManager().onSecuritySetupInitiated(callback);
+ }
+
+ /**
+ * Set up a callback for when the security setup procedure (key generation
+ * and exchange) for a link has completed. This will be skipped for bonded
+ * devices. The callback is passed in the success/failure status of the
+ * security setup procedure.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from SecurityManager directly. A former
+ * call to ble.onSecuritySetupCompleted(callback) should be replaced with
+ * ble.securityManager().onSecuritySetupCompleted(callback).
+ */
+ void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
+ securityManager().onSecuritySetupCompleted(callback);
+ }
+
+ /**
+ * Set up a callback for when a link with the peer is secured. For bonded
+ * devices, subsequent reconnections with a bonded peer will result only in
+ * this callback when the link is secured, and setup procedures will not
+ * occur unless the bonding information is either lost or deleted on either
+ * or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
+ * to the level of security in effect for the secured link.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from SecurityManager directly. A former
+ * call to ble.onLinkSecured(callback) should be replaced with
+ * ble.securityManager().onLinkSecured(callback).
+ */
+ void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
+ securityManager().onLinkSecured(callback);
+ }
+
+ /**
+ * Set up a callback for successful bonding, meaning that link-specific security
+ * context is stored persistently for a peer device.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from SecurityManager directly. A former
+ * call to ble.onSecurityContextStored(callback) should be replaced with
+ * ble.securityManager().onSecurityContextStored(callback).
+ */
+ void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
+ securityManager().onSecurityContextStored(callback);
+ }
+
+ /**
+ * Set up a callback for when the passkey needs to be displayed on a
+ * peripheral with DISPLAY capability. This happens when security is
+ * configured to prevent Man-In-The-Middle attacks, and the peers need to exchange
+ * a passkey (or PIN) to authenticate the connection
+ * attempt.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from SecurityManager directly. A former
+ * call to ble.onPasskeyDisplay(callback) should be replaced with
+ * ble.securityManager().onPasskeyDisplay(callback).
+ */
+ void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
+ return securityManager().onPasskeyDisplay(callback);
+ }
+
+private:
+ /**
+ * Implementation of init() [internal to BLE_API].
+ *
+ * The implementation is separated into a private method because it isn't
+ * suitable to be included in the header.
+ */
+ ble_error_t initImplementation(FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback);
+
+private:
+ BLE(const BLE&);
+ BLE &operator=(const BLE &);
+
+private:
+ InstanceID_t instanceID;
+ BLEInstanceBase *transport; /* The device-specific backend */
+};
+
+typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
+ * code. Will be dropped at some point soon.*/
+
#endif // ifndef __BLE_H__
\ No newline at end of file