This is the open source Pawn interpreter ported to mbed. See here: http://www.compuphase.com/pawn/pawn.htm and here: http://code.google.com/p/pawnscript/
Some instructions:
- Put the attached include folder next to your source, so when you compile you get all the proper definitions
- Use the attached main.p as a starting point if you wish
- Compile your main.p into main.amx - Put your main.amx on the mbed 'drive'
- Reset and be amazed.
Important Compile Notes:
- You should use the -S# option to define a smaller default stack size. Start with -S64 and go up from there if needed.
- To use on the Cortex-M0 version of the mbed (LPC11U24), you MUST include the TARGET=3 command-line option as well, so the pin names are properly defined. In the future this may be handled on the native code side.
Known Issues:
At the moment it appears the kbhit() function is not working right - at least on my mac. Will continue testing on Windows.Working fine.
Todo:
- Add more wrappers for the mbed peripherals
- Add Pawn overlay support, to allow much larger scripts to run (even on the LPC11U24)
Diff: amxtime.h
- Revision:
- 2:01588bd27169
diff -r cc719e522b5d -r 01588bd27169 amxtime.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/amxtime.h Wed May 22 16:30:01 2013 +0000 @@ -0,0 +1,17 @@ +#ifndef AMXTIME_H_INCLUDED +#define AMXTIME_H_INCLUDED + +// define the public interface to the amxtime module + +#ifdef __cplusplus +extern "C" { +#endif + +int AMXEXPORT AMXAPI amx_TimeInit(AMX *amx); +int AMXEXPORT AMXAPI amx_TimeCleanup(AMX *amx); + +#ifdef __cplusplus +} +#endif + +#endif /* AMXTIME_H_INCLUDED */