This is the open source Pawn interpreter ported to mbed. See here: http://www.compuphase.com/pawn/pawn.htm and here: http://code.google.com/p/pawnscript/
Some instructions:
- Put the attached include folder next to your source, so when you compile you get all the proper definitions
- Use the attached main.p as a starting point if you wish
- Compile your main.p into main.amx - Put your main.amx on the mbed 'drive'
- Reset and be amazed.
Important Compile Notes:
- You should use the -S# option to define a smaller default stack size. Start with -S64 and go up from there if needed.
- To use on the Cortex-M0 version of the mbed (LPC11U24), you MUST include the TARGET=3 command-line option as well, so the pin names are properly defined. In the future this may be handled on the native code side.
Known Issues:
At the moment it appears the kbhit() function is not working right - at least on my mac. Will continue testing on Windows.Working fine.
Todo:
- Add more wrappers for the mbed peripherals
- Add Pawn overlay support, to allow much larger scripts to run (even on the LPC11U24)
_amxmbed.h@0:3ab1d2d14eb3, 2012-11-15 (annotated)
- Committer:
- tylerwilson
- Date:
- Thu Nov 15 17:41:21 2012 +0000
- Revision:
- 0:3ab1d2d14eb3
Initial Pawn 4.x interpreter for mbed check-in
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
tylerwilson | 0:3ab1d2d14eb3 | 1 | /** |
tylerwilson | 0:3ab1d2d14eb3 | 2 | * Include file for the interface to mbed from Pawn interpreter. |
tylerwilson | 0:3ab1d2d14eb3 | 3 | * |
tylerwilson | 0:3ab1d2d14eb3 | 4 | * Copyright 2011 Pulse-Robotics, Inc. |
tylerwilson | 0:3ab1d2d14eb3 | 5 | * Author: Tyler Wilson |
tylerwilson | 0:3ab1d2d14eb3 | 6 | */ |
tylerwilson | 0:3ab1d2d14eb3 | 7 | |
tylerwilson | 0:3ab1d2d14eb3 | 8 | #ifndef _AMXMBED_H |
tylerwilson | 0:3ab1d2d14eb3 | 9 | #define _AMXMBED_H |
tylerwilson | 0:3ab1d2d14eb3 | 10 | |
tylerwilson | 0:3ab1d2d14eb3 | 11 | //#include "mbed.h" |
tylerwilson | 0:3ab1d2d14eb3 | 12 | |
tylerwilson | 0:3ab1d2d14eb3 | 13 | //void mbed_set_serial(Serial* serial); |
tylerwilson | 0:3ab1d2d14eb3 | 14 | |
tylerwilson | 0:3ab1d2d14eb3 | 15 | #ifdef __cplusplus |
tylerwilson | 0:3ab1d2d14eb3 | 16 | extern "C" { |
tylerwilson | 0:3ab1d2d14eb3 | 17 | #endif |
tylerwilson | 0:3ab1d2d14eb3 | 18 | |
tylerwilson | 0:3ab1d2d14eb3 | 19 | // from amxcons.c. need to declare them as extrn "C" so we build correctly |
tylerwilson | 0:3ab1d2d14eb3 | 20 | int amx_putstr(const char *); |
tylerwilson | 0:3ab1d2d14eb3 | 21 | int amx_putchar(int); |
tylerwilson | 0:3ab1d2d14eb3 | 22 | int amx_fflush(void); |
tylerwilson | 0:3ab1d2d14eb3 | 23 | int amx_getch(void); |
tylerwilson | 0:3ab1d2d14eb3 | 24 | char* amx_gets(char* ,int); |
tylerwilson | 0:3ab1d2d14eb3 | 25 | int amx_termctl(int,int); |
tylerwilson | 0:3ab1d2d14eb3 | 26 | void amx_clrscr(void); |
tylerwilson | 0:3ab1d2d14eb3 | 27 | void amx_clreol(void); |
tylerwilson | 0:3ab1d2d14eb3 | 28 | int amx_gotoxy(int x,int y); |
tylerwilson | 0:3ab1d2d14eb3 | 29 | void amx_wherexy(int *x,int *y); |
tylerwilson | 0:3ab1d2d14eb3 | 30 | unsigned int amx_setattr(int foregr,int backgr,int highlight); |
tylerwilson | 0:3ab1d2d14eb3 | 31 | void amx_console(int columns, int lines, int flags); |
tylerwilson | 0:3ab1d2d14eb3 | 32 | void amx_viewsize(int *width,int *height); |
tylerwilson | 0:3ab1d2d14eb3 | 33 | int amx_kbhit(void); |
tylerwilson | 0:3ab1d2d14eb3 | 34 | |
tylerwilson | 0:3ab1d2d14eb3 | 35 | //int mbed_getc(void); |
tylerwilson | 0:3ab1d2d14eb3 | 36 | //int mbed_putc(int character); |
tylerwilson | 0:3ab1d2d14eb3 | 37 | //int mbed_puts(const char* str); |
tylerwilson | 0:3ab1d2d14eb3 | 38 | //int mbed_kbhit(void); |
tylerwilson | 0:3ab1d2d14eb3 | 39 | |
tylerwilson | 0:3ab1d2d14eb3 | 40 | #ifdef __cplusplus |
tylerwilson | 0:3ab1d2d14eb3 | 41 | } |
tylerwilson | 0:3ab1d2d14eb3 | 42 | #endif |
tylerwilson | 0:3ab1d2d14eb3 | 43 | |
tylerwilson | 0:3ab1d2d14eb3 | 44 | #endif /* _AMXMBED_H */ |