Diff: main.cpp

Revision:

11:9ebbb4dd9760

Parent:

10:d9a6a2fede8c

Child:

12:1404f010d12c

diff -r d9a6a2fede8c -r 9ebbb4dd9760 main.cpp
--- a/main.cpp	Wed Feb 25 23:48:02 2015 +0000
+++ b/main.cpp	Thu Feb 26 00:05:22 2015 +0000
@@ -21,37 +21,16 @@
 #include "spi_master.h"
 #include "Adafruit_SSD1306.h"
 
-#define SSD1306_SETCONTRAST 0x81
-#define SSD1306_DISPLAYALLON_RESUME 0xA4
-#define SSD1306_DISPLAYALLON 0xA5
-#define SSD1306_NORMALDISPLAY 0xA6
-#define SSD1306_INVERTDISPLAY 0xA7
-#define SSD1306_DISPLAYOFF 0xAE
-#define SSD1306_DISPLAYON 0xAF
-#define SSD1306_SETDISPLAYOFFSET 0xD3
-#define SSD1306_SETCOMPINS 0xDA
-#define SSD1306_SETVCOMDETECT 0xDB
-#define SSD1306_SETDISPLAYCLOCKDIV 0xD5
-#define SSD1306_SETPRECHARGE 0xD9
-#define SSD1306_SETMULTIPLEX 0xA8
-#define SSD1306_SETLOWCOLUMN 0x00
-#define SSD1306_SETHIGHCOLUMN 0x10
-#define SSD1306_SETSTARTLINE 0x40
-#define SSD1306_MEMORYMODE 0x20
-#define SSD1306_COMSCANINC 0xC0
-#define SSD1306_COMSCANDEC 0xC8
-#define SSD1306_SEGREMAP 0xA0
-#define SSD1306_CHARGEPUMP 0x8D
 //DigitalOut spi_cs(P0_10);
-DigitalOut rst(A3);
-DigitalOut dc(A4);
-DigitalOut cs(D2);
+//DigitalOut rst(A3);
+//DigitalOut dc(A4);
+//DigitalOut cs(D2);
 DigitalOut led(D13);
 
-SPIClass SPI1(NRF_SPI1);
+//SPIClass SPI1(NRF_SPI1);
 
 
-//Adafruit_SSD1306_nrf gOled1(A4,A3,D2);// SPI, DC, RST, CS
+Adafruit_SSD1306_nrf gOled1(P0_5,P0_4,P0_10);// DC, RST, CS
 
 int main(void)
 {   
@@ -61,59 +40,6 @@
         led = 0; // ON
         wait (0.3);
         led = 1; // off
-    SPI1.begin(P0_8, P0_9, P0_11);//SCK, MOSI, MISO
-
-//Display initialisation
-    rst = 1;
-    // VDD (3.3V) goes high at start, lets just chill for a ms
-    wait_ms(1);
-    // bring reset low
-    rst = 0;
-    // wait 10ms
-    wait_ms(10);
-    // bring out of reset
-    rst = 1;
-    // turn on VCC (9V?)
-    SPI1.transfer(SSD1306_DISPLAYOFF);
-    SPI1.transfer(SSD1306_SETDISPLAYCLOCKDIV);
-    SPI1.transfer(0x80);                                  // the suggested ratio 0x80
-
-    SPI1.transfer(SSD1306_SETMULTIPLEX);
-    SPI1.transfer(31);
-
-    SPI1.transfer(SSD1306_SETDISPLAYOFFSET);
-    SPI1.transfer(0x0);                                   // no offset
-
-    SPI1.transfer(SSD1306_SETSTARTLINE | 0x0);            // line #0
-
-    SPI1.transfer(SSD1306_CHARGEPUMP);
-    SPI1.transfer(0x14);
-
-    SPI1.transfer(SSD1306_MEMORYMODE);
-    SPI1.transfer(0x00);                                  // 0x0 act like ks0108
-
-    SPI1.transfer(SSD1306_SEGREMAP | 0x1);
-
-    SPI1.transfer(SSD1306_COMSCANDEC);
-
-    SPI1.transfer(SSD1306_SETCOMPINS);
-    SPI1.transfer(0x02);        // TODO - calculate based on _rawHieght ?
-
-    SPI1.transfer(SSD1306_SETCONTRAST);
-    SPI1.transfer(0x8F  );
-
-    SPI1.transfer(SSD1306_SETPRECHARGE);
-    SPI1.transfer( 0x22);
-
-    SPI1.transfer(SSD1306_SETVCOMDETECT);
-    SPI1.transfer(0x40);
-
-    SPI1.transfer(SSD1306_DISPLAYALLON_RESUME);
-
-    SPI1.transfer(SSD1306_NORMALDISPLAY);
-    
-    SPI1.transfer(SSD1306_DISPLAYON);
-
 
 
     while(1){