Diff: KS0713.h

Revision:

0:1cfbf6b8d116

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/KS0713.h	Fri Nov 19 23:48:18 2010 +0000
@@ -0,0 +1,77 @@
+#ifndef GLCD_H
+#define GLCD_H
+
+#include "mbed.h"
+#include "bitmap.h"
+#include "font.h"
+
+
+    
+class gLCD : public Stream {
+public:
+
+   
+    /* rst = Reset rs = Register Select   e = Enable   d0 - d7 = 8bit data bus */
+   
+    gLCD(PinName rst, PinName rs, PinName e, PinName d0, PinName d1, PinName d2, PinName d3, PinName d4, PinName d5, PinName d6, PinName d7, PinName led);
+
+
+#if DOXYGEN_ONLY
+       int putc(int c);
+       int printf(const char* format, ...);
+#endif
+    
+   
+    
+    /*  locate(page address, column address)
+        Function to locate a position on the display */   
+        void locate(int page, int column);
+        
+    /*  clearScreen()
+        Function to clear entire display */
+        void clearScreen();
+    
+    /*  writeBitmap(name of bitmap array)
+        Function to write a bitmap to the display */
+        void writeBitmap(const int *ptrBitmap);
+    
+    
+        void locateChar(int page, int column);
+        
+  protected:     
+        
+        virtual int _putc(int value);
+        virtual int _getc();
+         
+         /* writeCommand(Command to send to display)
+       Function to write a command to the display
+       RS is low for commands */
+       
+       void writeCommand(int command);
+       
+    /* writeData(Data to send to display RAM)
+       Function to send data to the display */
+       
+       void writeData(int data);
+   
+    /* writeByte(Byte to send to the display via the data bus)
+        Function to write a byte to the display */
+        
+        void writeByte(int value); 
+    /*Initialize Digital Outputs for RS signal and E signal */
+    
+         void writeChar5x8(int p, int col, int c);
+         
+    DigitalOut _rs, _e, _rst, _led;
+    
+    /*Initialize bus for data*/
+    
+    BusOut _d;
+            
+    int _page;
+    int _column;
+    
+};
+
+
+#endif
\ No newline at end of file