![](/media/cache/profiles/89a26a363b87a87ac6a94277e841b7f4.50x50_q85.jpg)
The codebase to run the *spark d-fuser controller www.sparkav.co.uk/dvimixer
Dependencies: SPK-TVOne DMX DmxArtNet NetServicesMin OSC PinDetect mRotaryEncoder iniparser mbed spk_oled_ssd1305 filter
SPKDF_ini.h
- Committer:
- tobyspark
- Date:
- 2014-07-09
- Revision:
- 78:7517f0060611
- Parent:
- 77:20f948d4885e
File content as of revision 78:7517f0060611:
########################################################################## # _____ _____ _____ _____ _____ ____ _____ _____ _____ _____ _____ # # | __| _ | _ | __ | | | | \| __| | | __| __| __ | # # |__ | __| | -| -| | | | __| | |__ | __| -| # # |_____|__| |__|__|__|__|__|__| |____/|__| |_____|_____|_____|__|__| # # # ######################################### A PROJECT BY TOBY HARRIS ####### ### NETWORK # # Parameters for the various network modes # # OSC: if DHCP is set to Yes, the IP address parameters will be ignored. # DMX: no universe setting, it's the cable you plug in! # Artnet: Will use the channel mapping set in the DMX section, along with the universe set here. [OSC] DHCP = No ControllerAddress = 10.0.0.02 ControllerPort = 10000 ControllerSubnetMask = 255.255.255.0 ControllerGateway = 10.0.0.1 ControllerDNS = 10.0.0.1 SendAddress = 255.255.255.255 SendPort = 10000 [ArtNet] ControllerAddress = 2.0.0.100 BroadcastAddress = 2.255.255.255 Universe = 0 [DMX] InChannelXFade = 0 InChannelFadeUp = 1 OutChannelXFade = 0 OutChannelFadeUp = 1 ### KEYS # # Name = What is shown in menu # MinY...MaxV = As per TVOne keyer settings. # Note these are super sensitive, one laptop will have slightly different # numbers to another to achieve otherwise the same -- ie. pure blue -- key. # # Keying advice from the 1T-C2-750 Manual: The Min/Max parameters are used to # select what range of Y (luminance/grey-scale) values are made transparent # within the selected window/lock source. In order to key out part of an image, # start with the max value and increase it until the required lighter parts # within the window/lock source disappear. Then adjust the min level to bring # back any darker parts of the image. [Key1] Name = White In MinY = 0 MaxY = 166 MinU = 128 MaxU = 129 MinV = 128 MaxV = 129 [Key2] Name = Black Out MinY = 0 MaxY = 50 MinU = 128 MaxU = 129 MinV = 128 MaxV = 129 [Key3] Name = Blue Out MinY = 30 MaxY = 35 MinU = 237 MaxU = 242 MinV = 114 MaxV = 121 [Key4] Name = Green Out MinY = 144 MaxY = 145 MinU = 53 MaxU = 135 MinV = 34 MaxV = 35 # Edit the above, or add your own keys here, up to Key99 ### RESOLUTIONS # # Name = What is shown in menu # Number = Resolution number in TVOne. ie. what would be set in Menu > Outputs > Set Resolution # EDID Number = The EDID to use on the inputs, which what your computer will think its connected to. ie. what would be set in Menu > Windows > Display Emul. EDID # # EDID numbers are as follows # 0 = Mem1, 1 = Mem2, 2 = Mem3, # 3 = Mem4 which we use for Matrox EDID, its uploaded by the controller as part of 'Conform Processor' # 4 = 3D, 5 = HDMI, 6 = DVI, 7 = Monitor Passthrough [Resolution1] Name = VGA (640x480) Number = 8 EDIDNumber = 6 [Resolution2] Name = SVGA (800x600) Number = 18 EDIDNumber = 6 [Resolution3] Name = XGA (1024x768) Number = 28 EDIDNumber = 6 [Resolution4] Name = WSXGA+ (1650x1050) Number = 85 EDIDNumber = 6 [Resolution5] Name = WUXGA (1920x1200) Number = 115 EDIDNumber = 6 [Resolution6] Name = HD 720P50 (1280x720) Number = 44 EDIDNumber = 5 [Resolution7] Name = HD 720P60 (1280x720) Number = 48 EDIDNumber = 5 [Resolution8] Name = HD 1080P24 (1920x1080) Number = 101 EDIDNumber = 5 [Resolution9] Name = HD 1080P30 (1920x1080) Number = 105 EDIDNumber = 5 [Resolution10] Name = HD 1080P50 (1920x1080) Number = 106 EDIDNumber = 5 [Resolution11] Name = HD 1080P60 (1920x1080) Number = 109 EDIDNumber = 5 [Resolution12] Name = Dualhead SVGA (1600x600) Number = 75 EDIDNumber = 3 [Resolution13] Name = Dualhead XGA (2048x768) Number = 123 EDIDNumber = 3 [Resolution14] Name = Triplehead VGA (1920x480) Number = 90 EDIDNumber = 3 [Resolution15] Name = Quadhead XGA (2048x1536) Number = 128 EDIDNumber = 2 # Edit the above, or add your own keys here, up to Resolution99 # End of SPKDF.ini -- Ensure there is a blank line below this.