The codebase to run the *spark d-fuser controller www.sparkav.co.uk/dvimixer
Dependencies: SPK-TVOne DMX DmxArtNet NetServicesMin OSC PinDetect mRotaryEncoder iniparser mbed spk_oled_ssd1305 filter
Diff: SPKDF_ini.h
- Revision:
- 59:bb17773d0051
- Parent:
- 36:8b5c75c8bc23
- Child:
- 68:c26478f42ca4
--- a/SPKDF_ini.h Sun May 12 23:50:33 2013 +0000 +++ b/SPKDF_ini.h Tue May 21 23:39:34 2013 +0000 @@ -10,9 +10,15 @@ # # Name = What is shown in menu # MinY...MaxV = As per TVOne keyer settings. -# Note these are super sensitive, one laptop will have slightly different numbers to another to acheive otherwise the same -- ie. pure blue -- key. +# Note these are super sensitive, one laptop will have slightly different +# numbers to another to achieve otherwise the same -- ie. pure blue -- key. # -# Keying advice from the 1T-C2-750 Manual: The Min/Max parameters are used to select what range of Y (luminance/grey-scale) values are made transparent within the selected window/lock source. In order to key out part of an image, start with the max value and increase it until the required lighter parts within the window/lock source disappear. Then adjust the min level to bring back any darker parts of the image. +# Keying advice from the 1T-C2-750 Manual: The Min/Max parameters are used to +# select what range of Y (luminance/grey-scale) values are made transparent +# within the selected window/lock source. In order to key out part of an image, +# start with the max value and increase it until the required lighter parts +# within the window/lock source disappear. Then adjust the min level to bring +# back any darker parts of the image. [Key1] Name = Lumakey @@ -34,7 +40,7 @@ # Edit the above, or add your own keys here, up to Key99 -### RESOLUTIONS +### RESOLUTIONS # # Name = What is shown in menu # Number = Resolution number in TVOne. ie. what would be set in Menu > Outputs > Set Resolution @@ -71,28 +77,50 @@ EDIDNumber = 6 [Resolution6] -Name = HD 720P60 (1280x720) -Number = 46 +Name = HD 720P24 (1280x720) +Number = 40 EDIDNumber = 5 [Resolution7] +Name = HD 720P50 (1280x720) +Number = 44 +EDIDNumber = 5 + +[Resolution8] +Name = HD 720P60 (1280x720) +Number = 48 +EDIDNumber = 5 + +[Resolution9] +Name = HD 1080P24 (1920x1080) +Number = 101 +EDIDNumber = 5 + +[Resolution10] +Name = HD 1080P50 (1920x1080) +Number = 106 +EDIDNumber = 5 + +[Resolution11] Name = HD 1080P60 (1920x1080) Number = 109 EDIDNumber = 5 -[Resolution8] +[Resolution12] Name = Dual head SVGA (1600x600) Number = 75 EDIDNumber = 3 -[Resolution9] +[Resolution13] Name = Dual head XGA (2048x768) Number = 123 EDIDNumber = 3 -[Resolution10] +[Resolution14] Name = Triple head VGA (1920x480) Number = 90 EDIDNumber = 3 -# Edit the above, or add your own keys here, up to Resolution99 \ No newline at end of file +# Edit the above, or add your own keys here, up to Resolution99 + +# End of SPKDF.ini -- Ensure there is a blank line below this.