Oscar Ariza
BLE
Fork of
BLE_API
by 
Bluetooth Low Energy
ble.doxyfile@981:07ce7d9ed5ff, 2015-11-26 (annotated)
- Committer:
- rgrover1
- Date:
- Thu Nov 26 12:52:37 2015 +0000
- Revision:
- 981:07ce7d9ed5ff
- Child:
- 987:5292837107a3
- Child:
- 996:287604cca609
Synchronized with git rev fa755f1a
Author: Rohit Grover
Restoring previous layout of doxygen related files.
These files will undergo further re-organization in the coming
weeks. It is too early to fix on creating a subfolder for doxygen (as
the original pull request suggested).
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| rgrover1 | 981:07ce7d9ed5ff | 1 | # Doxyfile 1.8.4 |
| rgrover1 | 981:07ce7d9ed5ff | 2 | |
| rgrover1 | 981:07ce7d9ed5ff | 3 | # This file describes the settings to be used by the documentation system |
| rgrover1 | 981:07ce7d9ed5ff | 4 | # doxygen (www.doxygen.org) for a project. |
| rgrover1 | 981:07ce7d9ed5ff | 5 | # |
| rgrover1 | 981:07ce7d9ed5ff | 6 | # All text after a double hash (##) is considered a comment and is placed |
| rgrover1 | 981:07ce7d9ed5ff | 7 | # in front of the TAG it is preceding . |
| rgrover1 | 981:07ce7d9ed5ff | 8 | # All text after a hash (#) is considered a comment and will be ignored. |
| rgrover1 | 981:07ce7d9ed5ff | 9 | # The format is: |
| rgrover1 | 981:07ce7d9ed5ff | 10 | # TAG = value [value, ...] |
| rgrover1 | 981:07ce7d9ed5ff | 11 | # For lists items can also be appended using: |
| rgrover1 | 981:07ce7d9ed5ff | 12 | # TAG += value [value, ...] |
| rgrover1 | 981:07ce7d9ed5ff | 13 | # Values that contain spaces should be placed between quotes (" "). |
| rgrover1 | 981:07ce7d9ed5ff | 14 | |
| rgrover1 | 981:07ce7d9ed5ff | 15 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 16 | # Project related configuration options |
| rgrover1 | 981:07ce7d9ed5ff | 17 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 18 | |
| rgrover1 | 981:07ce7d9ed5ff | 19 | # This tag specifies the encoding used for all characters in the config file |
| rgrover1 | 981:07ce7d9ed5ff | 20 | # that follow. The default is UTF-8 which is also the encoding used for all |
| rgrover1 | 981:07ce7d9ed5ff | 21 | # text before the first occurrence of this tag. Doxygen uses libiconv (or the |
| rgrover1 | 981:07ce7d9ed5ff | 22 | # iconv built into libc) for the transcoding. See |
| rgrover1 | 981:07ce7d9ed5ff | 23 | # http://www.gnu.org/software/libiconv for the list of possible encodings. |
| rgrover1 | 981:07ce7d9ed5ff | 24 | |
| rgrover1 | 981:07ce7d9ed5ff | 25 | DOXYFILE_ENCODING = UTF-8 |
| rgrover1 | 981:07ce7d9ed5ff | 26 | |
| rgrover1 | 981:07ce7d9ed5ff | 27 | # The PROJECT_NAME tag is a single word (or sequence of words) that should |
| rgrover1 | 981:07ce7d9ed5ff | 28 | # identify the project. Note that if you do not use Doxywizard you need |
| rgrover1 | 981:07ce7d9ed5ff | 29 | # to put quotes around the project name if it contains spaces. |
| rgrover1 | 981:07ce7d9ed5ff | 30 | |
| rgrover1 | 981:07ce7d9ed5ff | 31 | PROJECT_NAME = "BLE API" |
| rgrover1 | 981:07ce7d9ed5ff | 32 | |
| rgrover1 | 981:07ce7d9ed5ff | 33 | # The PROJECT_NUMBER tag can be used to enter a project or revision number. |
| rgrover1 | 981:07ce7d9ed5ff | 34 | # This could be handy for archiving the generated documentation or |
| rgrover1 | 981:07ce7d9ed5ff | 35 | # if some version control system is used. |
| rgrover1 | 981:07ce7d9ed5ff | 36 | |
| rgrover1 | 981:07ce7d9ed5ff | 37 | PROJECT_NUMBER = v2 |
| rgrover1 | 981:07ce7d9ed5ff | 38 | |
| rgrover1 | 981:07ce7d9ed5ff | 39 | # Using the PROJECT_BRIEF tag one can provide an optional one line description |
| rgrover1 | 981:07ce7d9ed5ff | 40 | # for a project that appears at the top of each page and should give viewer |
| rgrover1 | 981:07ce7d9ed5ff | 41 | # a quick idea about the purpose of the project. Keep the description short. |
| rgrover1 | 981:07ce7d9ed5ff | 42 | |
| rgrover1 | 981:07ce7d9ed5ff | 43 | PROJECT_BRIEF = "An abstraction for using Bluetooth Low Energy." |
| rgrover1 | 981:07ce7d9ed5ff | 44 | |
| rgrover1 | 981:07ce7d9ed5ff | 45 | # With the PROJECT_LOGO tag one can specify an logo or icon that is |
| rgrover1 | 981:07ce7d9ed5ff | 46 | # included in the documentation. The maximum height of the logo should not |
| rgrover1 | 981:07ce7d9ed5ff | 47 | # exceed 55 pixels and the maximum width should not exceed 200 pixels. |
| rgrover1 | 981:07ce7d9ed5ff | 48 | # Doxygen will copy the logo to the output directory. |
| rgrover1 | 981:07ce7d9ed5ff | 49 | |
| rgrover1 | 981:07ce7d9ed5ff | 50 | PROJECT_LOGO = |
| rgrover1 | 981:07ce7d9ed5ff | 51 | |
| rgrover1 | 981:07ce7d9ed5ff | 52 | # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) |
| rgrover1 | 981:07ce7d9ed5ff | 53 | # base path where the generated documentation will be put. |
| rgrover1 | 981:07ce7d9ed5ff | 54 | # If a relative path is entered, it will be relative to the location |
| rgrover1 | 981:07ce7d9ed5ff | 55 | # where doxygen was started. If left blank the current directory will be used. |
| rgrover1 | 981:07ce7d9ed5ff | 56 | |
| rgrover1 | 981:07ce7d9ed5ff | 57 | OUTPUT_DIRECTORY = apidoc/ |
| rgrover1 | 981:07ce7d9ed5ff | 58 | |
| rgrover1 | 981:07ce7d9ed5ff | 59 | # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create |
| rgrover1 | 981:07ce7d9ed5ff | 60 | # 4096 sub-directories (in 2 levels) under the output directory of each output |
| rgrover1 | 981:07ce7d9ed5ff | 61 | # format and will distribute the generated files over these directories. |
| rgrover1 | 981:07ce7d9ed5ff | 62 | # Enabling this option can be useful when feeding doxygen a huge amount of |
| rgrover1 | 981:07ce7d9ed5ff | 63 | # source files, where putting all generated files in the same directory would |
| rgrover1 | 981:07ce7d9ed5ff | 64 | # otherwise cause performance problems for the file system. |
| rgrover1 | 981:07ce7d9ed5ff | 65 | |
| rgrover1 | 981:07ce7d9ed5ff | 66 | CREATE_SUBDIRS = NO |
| rgrover1 | 981:07ce7d9ed5ff | 67 | |
| rgrover1 | 981:07ce7d9ed5ff | 68 | # The OUTPUT_LANGUAGE tag is used to specify the language in which all |
| rgrover1 | 981:07ce7d9ed5ff | 69 | # documentation generated by doxygen is written. Doxygen will use this |
| rgrover1 | 981:07ce7d9ed5ff | 70 | # information to generate all constant output in the proper language. |
| rgrover1 | 981:07ce7d9ed5ff | 71 | # The default language is English, other supported languages are: |
| rgrover1 | 981:07ce7d9ed5ff | 72 | # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, |
| rgrover1 | 981:07ce7d9ed5ff | 73 | # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, |
| rgrover1 | 981:07ce7d9ed5ff | 74 | # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English |
| rgrover1 | 981:07ce7d9ed5ff | 75 | # messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, |
| rgrover1 | 981:07ce7d9ed5ff | 76 | # Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, |
| rgrover1 | 981:07ce7d9ed5ff | 77 | # Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. |
| rgrover1 | 981:07ce7d9ed5ff | 78 | |
| rgrover1 | 981:07ce7d9ed5ff | 79 | OUTPUT_LANGUAGE = English |
| rgrover1 | 981:07ce7d9ed5ff | 80 | |
| rgrover1 | 981:07ce7d9ed5ff | 81 | # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will |
| rgrover1 | 981:07ce7d9ed5ff | 82 | # include brief member descriptions after the members that are listed in |
| rgrover1 | 981:07ce7d9ed5ff | 83 | # the file and class documentation (similar to JavaDoc). |
| rgrover1 | 981:07ce7d9ed5ff | 84 | # Set to NO to disable this. |
| rgrover1 | 981:07ce7d9ed5ff | 85 | |
| rgrover1 | 981:07ce7d9ed5ff | 86 | BRIEF_MEMBER_DESC = YES |
| rgrover1 | 981:07ce7d9ed5ff | 87 | |
| rgrover1 | 981:07ce7d9ed5ff | 88 | # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend |
| rgrover1 | 981:07ce7d9ed5ff | 89 | # the brief description of a member or function before the detailed description. |
| rgrover1 | 981:07ce7d9ed5ff | 90 | # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the |
| rgrover1 | 981:07ce7d9ed5ff | 91 | # brief descriptions will be completely suppressed. |
| rgrover1 | 981:07ce7d9ed5ff | 92 | |
| rgrover1 | 981:07ce7d9ed5ff | 93 | REPEAT_BRIEF = YES |
| rgrover1 | 981:07ce7d9ed5ff | 94 | |
| rgrover1 | 981:07ce7d9ed5ff | 95 | # This tag implements a quasi-intelligent brief description abbreviator |
| rgrover1 | 981:07ce7d9ed5ff | 96 | # that is used to form the text in various listings. Each string |
| rgrover1 | 981:07ce7d9ed5ff | 97 | # in this list, if found as the leading text of the brief description, will be |
| rgrover1 | 981:07ce7d9ed5ff | 98 | # stripped from the text and the result after processing the whole list, is |
| rgrover1 | 981:07ce7d9ed5ff | 99 | # used as the annotated text. Otherwise, the brief description is used as-is. |
| rgrover1 | 981:07ce7d9ed5ff | 100 | # If left blank, the following values are used ("$name" is automatically |
| rgrover1 | 981:07ce7d9ed5ff | 101 | # replaced with the name of the entity): "The $name class" "The $name widget" |
| rgrover1 | 981:07ce7d9ed5ff | 102 | # "The $name file" "is" "provides" "specifies" "contains" |
| rgrover1 | 981:07ce7d9ed5ff | 103 | # "represents" "a" "an" "the" |
| rgrover1 | 981:07ce7d9ed5ff | 104 | |
| rgrover1 | 981:07ce7d9ed5ff | 105 | ABBREVIATE_BRIEF = "The $name class" \ |
| rgrover1 | 981:07ce7d9ed5ff | 106 | "The $name widget" \ |
| rgrover1 | 981:07ce7d9ed5ff | 107 | "The $name file" \ |
| rgrover1 | 981:07ce7d9ed5ff | 108 | is \ |
| rgrover1 | 981:07ce7d9ed5ff | 109 | provides \ |
| rgrover1 | 981:07ce7d9ed5ff | 110 | specifies \ |
| rgrover1 | 981:07ce7d9ed5ff | 111 | contains \ |
| rgrover1 | 981:07ce7d9ed5ff | 112 | represents \ |
| rgrover1 | 981:07ce7d9ed5ff | 113 | a \ |
| rgrover1 | 981:07ce7d9ed5ff | 114 | an \ |
| rgrover1 | 981:07ce7d9ed5ff | 115 | the |
| rgrover1 | 981:07ce7d9ed5ff | 116 | |
| rgrover1 | 981:07ce7d9ed5ff | 117 | # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then |
| rgrover1 | 981:07ce7d9ed5ff | 118 | # Doxygen will generate a detailed section even if there is only a brief |
| rgrover1 | 981:07ce7d9ed5ff | 119 | # description. |
| rgrover1 | 981:07ce7d9ed5ff | 120 | |
| rgrover1 | 981:07ce7d9ed5ff | 121 | ALWAYS_DETAILED_SEC = NO |
| rgrover1 | 981:07ce7d9ed5ff | 122 | |
| rgrover1 | 981:07ce7d9ed5ff | 123 | # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all |
| rgrover1 | 981:07ce7d9ed5ff | 124 | # inherited members of a class in the documentation of that class as if those |
| rgrover1 | 981:07ce7d9ed5ff | 125 | # members were ordinary class members. Constructors, destructors and assignment |
| rgrover1 | 981:07ce7d9ed5ff | 126 | # operators of the base classes will not be shown. |
| rgrover1 | 981:07ce7d9ed5ff | 127 | |
| rgrover1 | 981:07ce7d9ed5ff | 128 | INLINE_INHERITED_MEMB = NO |
| rgrover1 | 981:07ce7d9ed5ff | 129 | |
| rgrover1 | 981:07ce7d9ed5ff | 130 | # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full |
| rgrover1 | 981:07ce7d9ed5ff | 131 | # path before files name in the file list and in the header files. If set |
| rgrover1 | 981:07ce7d9ed5ff | 132 | # to NO the shortest path that makes the file name unique will be used. |
| rgrover1 | 981:07ce7d9ed5ff | 133 | |
| rgrover1 | 981:07ce7d9ed5ff | 134 | FULL_PATH_NAMES = NO |
| rgrover1 | 981:07ce7d9ed5ff | 135 | |
| rgrover1 | 981:07ce7d9ed5ff | 136 | # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag |
| rgrover1 | 981:07ce7d9ed5ff | 137 | # can be used to strip a user-defined part of the path. Stripping is |
| rgrover1 | 981:07ce7d9ed5ff | 138 | # only done if one of the specified strings matches the left-hand part of |
| rgrover1 | 981:07ce7d9ed5ff | 139 | # the path. The tag can be used to show relative paths in the file list. |
| rgrover1 | 981:07ce7d9ed5ff | 140 | # If left blank the directory from which doxygen is run is used as the |
| rgrover1 | 981:07ce7d9ed5ff | 141 | # path to strip. Note that you specify absolute paths here, but also |
| rgrover1 | 981:07ce7d9ed5ff | 142 | # relative paths, which will be relative from the directory where doxygen is |
| rgrover1 | 981:07ce7d9ed5ff | 143 | # started. |
| rgrover1 | 981:07ce7d9ed5ff | 144 | |
| rgrover1 | 981:07ce7d9ed5ff | 145 | STRIP_FROM_PATH = |
| rgrover1 | 981:07ce7d9ed5ff | 146 | |
| rgrover1 | 981:07ce7d9ed5ff | 147 | # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of |
| rgrover1 | 981:07ce7d9ed5ff | 148 | # the path mentioned in the documentation of a class, which tells |
| rgrover1 | 981:07ce7d9ed5ff | 149 | # the reader which header file to include in order to use a class. |
| rgrover1 | 981:07ce7d9ed5ff | 150 | # If left blank only the name of the header file containing the class |
| rgrover1 | 981:07ce7d9ed5ff | 151 | # definition is used. Otherwise one should specify the include paths that |
| rgrover1 | 981:07ce7d9ed5ff | 152 | # are normally passed to the compiler using the -I flag. |
| rgrover1 | 981:07ce7d9ed5ff | 153 | |
| rgrover1 | 981:07ce7d9ed5ff | 154 | STRIP_FROM_INC_PATH = |
| rgrover1 | 981:07ce7d9ed5ff | 155 | |
| rgrover1 | 981:07ce7d9ed5ff | 156 | # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter |
| rgrover1 | 981:07ce7d9ed5ff | 157 | # (but less readable) file names. This can be useful if your file system |
| rgrover1 | 981:07ce7d9ed5ff | 158 | # doesn't support long names like on DOS, Mac, or CD-ROM. |
| rgrover1 | 981:07ce7d9ed5ff | 159 | |
| rgrover1 | 981:07ce7d9ed5ff | 160 | SHORT_NAMES = NO |
| rgrover1 | 981:07ce7d9ed5ff | 161 | |
| rgrover1 | 981:07ce7d9ed5ff | 162 | # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen |
| rgrover1 | 981:07ce7d9ed5ff | 163 | # will interpret the first line (until the first dot) of a JavaDoc-style |
| rgrover1 | 981:07ce7d9ed5ff | 164 | # comment as the brief description. If set to NO, the JavaDoc |
| rgrover1 | 981:07ce7d9ed5ff | 165 | # comments will behave just like regular Qt-style comments |
| rgrover1 | 981:07ce7d9ed5ff | 166 | # (thus requiring an explicit @brief command for a brief description.) |
| rgrover1 | 981:07ce7d9ed5ff | 167 | |
| rgrover1 | 981:07ce7d9ed5ff | 168 | JAVADOC_AUTOBRIEF = YES |
| rgrover1 | 981:07ce7d9ed5ff | 169 | |
| rgrover1 | 981:07ce7d9ed5ff | 170 | # If the QT_AUTOBRIEF tag is set to YES then Doxygen will |
| rgrover1 | 981:07ce7d9ed5ff | 171 | # interpret the first line (until the first dot) of a Qt-style |
| rgrover1 | 981:07ce7d9ed5ff | 172 | # comment as the brief description. If set to NO, the comments |
| rgrover1 | 981:07ce7d9ed5ff | 173 | # will behave just like regular Qt-style comments (thus requiring |
| rgrover1 | 981:07ce7d9ed5ff | 174 | # an explicit \brief command for a brief description.) |
| rgrover1 | 981:07ce7d9ed5ff | 175 | |
| rgrover1 | 981:07ce7d9ed5ff | 176 | QT_AUTOBRIEF = NO |
| rgrover1 | 981:07ce7d9ed5ff | 177 | |
| rgrover1 | 981:07ce7d9ed5ff | 178 | # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen |
| rgrover1 | 981:07ce7d9ed5ff | 179 | # treat a multi-line C++ special comment block (i.e. a block of //! or /// |
| rgrover1 | 981:07ce7d9ed5ff | 180 | # comments) as a brief description. This used to be the default behaviour. |
| rgrover1 | 981:07ce7d9ed5ff | 181 | # The new default is to treat a multi-line C++ comment block as a detailed |
| rgrover1 | 981:07ce7d9ed5ff | 182 | # description. Set this tag to YES if you prefer the old behaviour instead. |
| rgrover1 | 981:07ce7d9ed5ff | 183 | |
| rgrover1 | 981:07ce7d9ed5ff | 184 | MULTILINE_CPP_IS_BRIEF = NO |
| rgrover1 | 981:07ce7d9ed5ff | 185 | |
| rgrover1 | 981:07ce7d9ed5ff | 186 | # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented |
| rgrover1 | 981:07ce7d9ed5ff | 187 | # member inherits the documentation from any documented member that it |
| rgrover1 | 981:07ce7d9ed5ff | 188 | # re-implements. |
| rgrover1 | 981:07ce7d9ed5ff | 189 | |
| rgrover1 | 981:07ce7d9ed5ff | 190 | INHERIT_DOCS = YES |
| rgrover1 | 981:07ce7d9ed5ff | 191 | |
| rgrover1 | 981:07ce7d9ed5ff | 192 | # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce |
| rgrover1 | 981:07ce7d9ed5ff | 193 | # a new page for each member. If set to NO, the documentation of a member will |
| rgrover1 | 981:07ce7d9ed5ff | 194 | # be part of the file/class/namespace that contains it. |
| rgrover1 | 981:07ce7d9ed5ff | 195 | |
| rgrover1 | 981:07ce7d9ed5ff | 196 | SEPARATE_MEMBER_PAGES = NO |
| rgrover1 | 981:07ce7d9ed5ff | 197 | |
| rgrover1 | 981:07ce7d9ed5ff | 198 | # The TAB_SIZE tag can be used to set the number of spaces in a tab. |
| rgrover1 | 981:07ce7d9ed5ff | 199 | # Doxygen uses this value to replace tabs by spaces in code fragments. |
| rgrover1 | 981:07ce7d9ed5ff | 200 | |
| rgrover1 | 981:07ce7d9ed5ff | 201 | TAB_SIZE = 4 |
| rgrover1 | 981:07ce7d9ed5ff | 202 | |
| rgrover1 | 981:07ce7d9ed5ff | 203 | # This tag can be used to specify a number of aliases that acts |
| rgrover1 | 981:07ce7d9ed5ff | 204 | # as commands in the documentation. An alias has the form "name=value". |
| rgrover1 | 981:07ce7d9ed5ff | 205 | # For example adding "sideeffect=\par Side Effects:\n" will allow you to |
| rgrover1 | 981:07ce7d9ed5ff | 206 | # put the command \sideeffect (or @sideeffect) in the documentation, which |
| rgrover1 | 981:07ce7d9ed5ff | 207 | # will result in a user-defined paragraph with heading "Side Effects:". |
| rgrover1 | 981:07ce7d9ed5ff | 208 | # You can put \n's in the value part of an alias to insert newlines. |
| rgrover1 | 981:07ce7d9ed5ff | 209 | |
| rgrover1 | 981:07ce7d9ed5ff | 210 | ALIASES = |
| rgrover1 | 981:07ce7d9ed5ff | 211 | |
| rgrover1 | 981:07ce7d9ed5ff | 212 | # This tag can be used to specify a number of word-keyword mappings (TCL only). |
| rgrover1 | 981:07ce7d9ed5ff | 213 | # A mapping has the form "name=value". For example adding |
| rgrover1 | 981:07ce7d9ed5ff | 214 | # "class=itcl::class" will allow you to use the command class in the |
| rgrover1 | 981:07ce7d9ed5ff | 215 | # itcl::class meaning. |
| rgrover1 | 981:07ce7d9ed5ff | 216 | |
| rgrover1 | 981:07ce7d9ed5ff | 217 | TCL_SUBST = |
| rgrover1 | 981:07ce7d9ed5ff | 218 | |
| rgrover1 | 981:07ce7d9ed5ff | 219 | # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C |
| rgrover1 | 981:07ce7d9ed5ff | 220 | # sources only. Doxygen will then generate output that is more tailored for C. |
| rgrover1 | 981:07ce7d9ed5ff | 221 | # For instance, some of the names that are used will be different. The list |
| rgrover1 | 981:07ce7d9ed5ff | 222 | # of all members will be omitted, etc. |
| rgrover1 | 981:07ce7d9ed5ff | 223 | |
| rgrover1 | 981:07ce7d9ed5ff | 224 | OPTIMIZE_OUTPUT_FOR_C = NO |
| rgrover1 | 981:07ce7d9ed5ff | 225 | |
| rgrover1 | 981:07ce7d9ed5ff | 226 | # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java |
| rgrover1 | 981:07ce7d9ed5ff | 227 | # sources only. Doxygen will then generate output that is more tailored for |
| rgrover1 | 981:07ce7d9ed5ff | 228 | # Java. For instance, namespaces will be presented as packages, qualified |
| rgrover1 | 981:07ce7d9ed5ff | 229 | # scopes will look different, etc. |
| rgrover1 | 981:07ce7d9ed5ff | 230 | |
| rgrover1 | 981:07ce7d9ed5ff | 231 | OPTIMIZE_OUTPUT_JAVA = NO |
| rgrover1 | 981:07ce7d9ed5ff | 232 | |
| rgrover1 | 981:07ce7d9ed5ff | 233 | # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran |
| rgrover1 | 981:07ce7d9ed5ff | 234 | # sources only. Doxygen will then generate output that is more tailored for |
| rgrover1 | 981:07ce7d9ed5ff | 235 | # Fortran. |
| rgrover1 | 981:07ce7d9ed5ff | 236 | |
| rgrover1 | 981:07ce7d9ed5ff | 237 | OPTIMIZE_FOR_FORTRAN = NO |
| rgrover1 | 981:07ce7d9ed5ff | 238 | |
| rgrover1 | 981:07ce7d9ed5ff | 239 | # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL |
| rgrover1 | 981:07ce7d9ed5ff | 240 | # sources. Doxygen will then generate output that is tailored for |
| rgrover1 | 981:07ce7d9ed5ff | 241 | # VHDL. |
| rgrover1 | 981:07ce7d9ed5ff | 242 | |
| rgrover1 | 981:07ce7d9ed5ff | 243 | OPTIMIZE_OUTPUT_VHDL = NO |
| rgrover1 | 981:07ce7d9ed5ff | 244 | |
| rgrover1 | 981:07ce7d9ed5ff | 245 | # Doxygen selects the parser to use depending on the extension of the files it |
| rgrover1 | 981:07ce7d9ed5ff | 246 | # parses. With this tag you can assign which parser to use for a given |
| rgrover1 | 981:07ce7d9ed5ff | 247 | # extension. Doxygen has a built-in mapping, but you can override or extend it |
| rgrover1 | 981:07ce7d9ed5ff | 248 | # using this tag. The format is ext=language, where ext is a file extension, |
| rgrover1 | 981:07ce7d9ed5ff | 249 | # and language is one of the parsers supported by doxygen: IDL, Java, |
| rgrover1 | 981:07ce7d9ed5ff | 250 | # Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, |
| rgrover1 | 981:07ce7d9ed5ff | 251 | # C++. For instance to make doxygen treat .inc files as Fortran files (default |
| rgrover1 | 981:07ce7d9ed5ff | 252 | # is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note |
| rgrover1 | 981:07ce7d9ed5ff | 253 | # that for custom extensions you also need to set FILE_PATTERNS otherwise the |
| rgrover1 | 981:07ce7d9ed5ff | 254 | # files are not read by doxygen. |
| rgrover1 | 981:07ce7d9ed5ff | 255 | |
| rgrover1 | 981:07ce7d9ed5ff | 256 | EXTENSION_MAPPING = |
| rgrover1 | 981:07ce7d9ed5ff | 257 | |
| rgrover1 | 981:07ce7d9ed5ff | 258 | # If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all |
| rgrover1 | 981:07ce7d9ed5ff | 259 | # comments according to the Markdown format, which allows for more readable |
| rgrover1 | 981:07ce7d9ed5ff | 260 | # documentation. See http://daringfireball.net/projects/markdown/ for details. |
| rgrover1 | 981:07ce7d9ed5ff | 261 | # The output of markdown processing is further processed by doxygen, so you |
| rgrover1 | 981:07ce7d9ed5ff | 262 | # can mix doxygen, HTML, and XML commands with Markdown formatting. |
| rgrover1 | 981:07ce7d9ed5ff | 263 | # Disable only in case of backward compatibilities issues. |
| rgrover1 | 981:07ce7d9ed5ff | 264 | |
| rgrover1 | 981:07ce7d9ed5ff | 265 | MARKDOWN_SUPPORT = YES |
| rgrover1 | 981:07ce7d9ed5ff | 266 | |
| rgrover1 | 981:07ce7d9ed5ff | 267 | # When enabled doxygen tries to link words that correspond to documented |
| rgrover1 | 981:07ce7d9ed5ff | 268 | # classes, or namespaces to their corresponding documentation. Such a link can |
| rgrover1 | 981:07ce7d9ed5ff | 269 | # be prevented in individual cases by by putting a % sign in front of the word |
| rgrover1 | 981:07ce7d9ed5ff | 270 | # or globally by setting AUTOLINK_SUPPORT to NO. |
| rgrover1 | 981:07ce7d9ed5ff | 271 | |
| rgrover1 | 981:07ce7d9ed5ff | 272 | AUTOLINK_SUPPORT = YES |
| rgrover1 | 981:07ce7d9ed5ff | 273 | |
| rgrover1 | 981:07ce7d9ed5ff | 274 | # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want |
| rgrover1 | 981:07ce7d9ed5ff | 275 | # to include (a tag file for) the STL sources as input, then you should |
| rgrover1 | 981:07ce7d9ed5ff | 276 | # set this tag to YES in order to let doxygen match functions declarations and |
| rgrover1 | 981:07ce7d9ed5ff | 277 | # definitions whose arguments contain STL classes (e.g. func(std::string); v.s. |
| rgrover1 | 981:07ce7d9ed5ff | 278 | # func(std::string) {}). This also makes the inheritance and collaboration |
| rgrover1 | 981:07ce7d9ed5ff | 279 | # diagrams that involve STL classes more complete and accurate. |
| rgrover1 | 981:07ce7d9ed5ff | 280 | |
| rgrover1 | 981:07ce7d9ed5ff | 281 | BUILTIN_STL_SUPPORT = NO |
| rgrover1 | 981:07ce7d9ed5ff | 282 | |
| rgrover1 | 981:07ce7d9ed5ff | 283 | # If you use Microsoft's C++/CLI language, you should set this option to YES to |
| rgrover1 | 981:07ce7d9ed5ff | 284 | # enable parsing support. |
| rgrover1 | 981:07ce7d9ed5ff | 285 | |
| rgrover1 | 981:07ce7d9ed5ff | 286 | CPP_CLI_SUPPORT = NO |
| rgrover1 | 981:07ce7d9ed5ff | 287 | |
| rgrover1 | 981:07ce7d9ed5ff | 288 | # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. |
| rgrover1 | 981:07ce7d9ed5ff | 289 | # Doxygen will parse them like normal C++ but will assume all classes use public |
| rgrover1 | 981:07ce7d9ed5ff | 290 | # instead of private inheritance when no explicit protection keyword is present. |
| rgrover1 | 981:07ce7d9ed5ff | 291 | |
| rgrover1 | 981:07ce7d9ed5ff | 292 | SIP_SUPPORT = NO |
| rgrover1 | 981:07ce7d9ed5ff | 293 | |
| rgrover1 | 981:07ce7d9ed5ff | 294 | # For Microsoft's IDL there are propget and propput attributes to indicate |
| rgrover1 | 981:07ce7d9ed5ff | 295 | # getter and setter methods for a property. Setting this option to YES (the |
| rgrover1 | 981:07ce7d9ed5ff | 296 | # default) will make doxygen replace the get and set methods by a property in |
| rgrover1 | 981:07ce7d9ed5ff | 297 | # the documentation. This will only work if the methods are indeed getting or |
| rgrover1 | 981:07ce7d9ed5ff | 298 | # setting a simple type. If this is not the case, or you want to show the |
| rgrover1 | 981:07ce7d9ed5ff | 299 | # methods anyway, you should set this option to NO. |
| rgrover1 | 981:07ce7d9ed5ff | 300 | |
| rgrover1 | 981:07ce7d9ed5ff | 301 | IDL_PROPERTY_SUPPORT = YES |
| rgrover1 | 981:07ce7d9ed5ff | 302 | |
| rgrover1 | 981:07ce7d9ed5ff | 303 | # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC |
| rgrover1 | 981:07ce7d9ed5ff | 304 | # tag is set to YES, then doxygen will reuse the documentation of the first |
| rgrover1 | 981:07ce7d9ed5ff | 305 | # member in the group (if any) for the other members of the group. By default |
| rgrover1 | 981:07ce7d9ed5ff | 306 | # all members of a group must be documented explicitly. |
| rgrover1 | 981:07ce7d9ed5ff | 307 | |
| rgrover1 | 981:07ce7d9ed5ff | 308 | DISTRIBUTE_GROUP_DOC = NO |
| rgrover1 | 981:07ce7d9ed5ff | 309 | |
| rgrover1 | 981:07ce7d9ed5ff | 310 | # Set the SUBGROUPING tag to YES (the default) to allow class member groups of |
| rgrover1 | 981:07ce7d9ed5ff | 311 | # the same type (for instance a group of public functions) to be put as a |
| rgrover1 | 981:07ce7d9ed5ff | 312 | # subgroup of that type (e.g. under the Public Functions section). Set it to |
| rgrover1 | 981:07ce7d9ed5ff | 313 | # NO to prevent subgrouping. Alternatively, this can be done per class using |
| rgrover1 | 981:07ce7d9ed5ff | 314 | # the \nosubgrouping command. |
| rgrover1 | 981:07ce7d9ed5ff | 315 | |
| rgrover1 | 981:07ce7d9ed5ff | 316 | SUBGROUPING = YES |
| rgrover1 | 981:07ce7d9ed5ff | 317 | |
| rgrover1 | 981:07ce7d9ed5ff | 318 | # When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and |
| rgrover1 | 981:07ce7d9ed5ff | 319 | # unions are shown inside the group in which they are included (e.g. using |
| rgrover1 | 981:07ce7d9ed5ff | 320 | # @ingroup) instead of on a separate page (for HTML and Man pages) or |
| rgrover1 | 981:07ce7d9ed5ff | 321 | # section (for LaTeX and RTF). |
| rgrover1 | 981:07ce7d9ed5ff | 322 | |
| rgrover1 | 981:07ce7d9ed5ff | 323 | INLINE_GROUPED_CLASSES = NO |
| rgrover1 | 981:07ce7d9ed5ff | 324 | |
| rgrover1 | 981:07ce7d9ed5ff | 325 | # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and |
| rgrover1 | 981:07ce7d9ed5ff | 326 | # unions with only public data fields or simple typedef fields will be shown |
| rgrover1 | 981:07ce7d9ed5ff | 327 | # inline in the documentation of the scope in which they are defined (i.e. file, |
| rgrover1 | 981:07ce7d9ed5ff | 328 | # namespace, or group documentation), provided this scope is documented. If set |
| rgrover1 | 981:07ce7d9ed5ff | 329 | # to NO (the default), structs, classes, and unions are shown on a separate |
| rgrover1 | 981:07ce7d9ed5ff | 330 | # page (for HTML and Man pages) or section (for LaTeX and RTF). |
| rgrover1 | 981:07ce7d9ed5ff | 331 | |
| rgrover1 | 981:07ce7d9ed5ff | 332 | INLINE_SIMPLE_STRUCTS = YES |
| rgrover1 | 981:07ce7d9ed5ff | 333 | |
| rgrover1 | 981:07ce7d9ed5ff | 334 | # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum |
| rgrover1 | 981:07ce7d9ed5ff | 335 | # is documented as struct, union, or enum with the name of the typedef. So |
| rgrover1 | 981:07ce7d9ed5ff | 336 | # typedef struct TypeS {} TypeT, will appear in the documentation as a struct |
| rgrover1 | 981:07ce7d9ed5ff | 337 | # with name TypeT. When disabled the typedef will appear as a member of a file, |
| rgrover1 | 981:07ce7d9ed5ff | 338 | # namespace, or class. And the struct will be named TypeS. This can typically |
| rgrover1 | 981:07ce7d9ed5ff | 339 | # be useful for C code in case the coding convention dictates that all compound |
| rgrover1 | 981:07ce7d9ed5ff | 340 | # types are typedef'ed and only the typedef is referenced, never the tag name. |
| rgrover1 | 981:07ce7d9ed5ff | 341 | |
| rgrover1 | 981:07ce7d9ed5ff | 342 | TYPEDEF_HIDES_STRUCT = NO |
| rgrover1 | 981:07ce7d9ed5ff | 343 | |
| rgrover1 | 981:07ce7d9ed5ff | 344 | # The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This |
| rgrover1 | 981:07ce7d9ed5ff | 345 | # cache is used to resolve symbols given their name and scope. Since this can |
| rgrover1 | 981:07ce7d9ed5ff | 346 | # be an expensive process and often the same symbol appear multiple times in |
| rgrover1 | 981:07ce7d9ed5ff | 347 | # the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too |
| rgrover1 | 981:07ce7d9ed5ff | 348 | # small doxygen will become slower. If the cache is too large, memory is wasted. |
| rgrover1 | 981:07ce7d9ed5ff | 349 | # The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid |
| rgrover1 | 981:07ce7d9ed5ff | 350 | # range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 |
| rgrover1 | 981:07ce7d9ed5ff | 351 | # symbols. |
| rgrover1 | 981:07ce7d9ed5ff | 352 | |
| rgrover1 | 981:07ce7d9ed5ff | 353 | LOOKUP_CACHE_SIZE = 0 |
| rgrover1 | 981:07ce7d9ed5ff | 354 | |
| rgrover1 | 981:07ce7d9ed5ff | 355 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 356 | # Build related configuration options |
| rgrover1 | 981:07ce7d9ed5ff | 357 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 358 | |
| rgrover1 | 981:07ce7d9ed5ff | 359 | # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in |
| rgrover1 | 981:07ce7d9ed5ff | 360 | # documentation are documented, even if no documentation was available. |
| rgrover1 | 981:07ce7d9ed5ff | 361 | # Private class members and static file members will be hidden unless |
| rgrover1 | 981:07ce7d9ed5ff | 362 | # the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES |
| rgrover1 | 981:07ce7d9ed5ff | 363 | |
| rgrover1 | 981:07ce7d9ed5ff | 364 | EXTRACT_ALL = YES |
| rgrover1 | 981:07ce7d9ed5ff | 365 | |
| rgrover1 | 981:07ce7d9ed5ff | 366 | # If the EXTRACT_PRIVATE tag is set to YES all private members of a class |
| rgrover1 | 981:07ce7d9ed5ff | 367 | # will be included in the documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 368 | |
| rgrover1 | 981:07ce7d9ed5ff | 369 | EXTRACT_PRIVATE = YES |
| rgrover1 | 981:07ce7d9ed5ff | 370 | |
| rgrover1 | 981:07ce7d9ed5ff | 371 | # If the EXTRACT_PACKAGE tag is set to YES all members with package or internal |
| rgrover1 | 981:07ce7d9ed5ff | 372 | # scope will be included in the documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 373 | |
| rgrover1 | 981:07ce7d9ed5ff | 374 | EXTRACT_PACKAGE = NO |
| rgrover1 | 981:07ce7d9ed5ff | 375 | |
| rgrover1 | 981:07ce7d9ed5ff | 376 | # If the EXTRACT_STATIC tag is set to YES all static members of a file |
| rgrover1 | 981:07ce7d9ed5ff | 377 | # will be included in the documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 378 | |
| rgrover1 | 981:07ce7d9ed5ff | 379 | EXTRACT_STATIC = YES |
| rgrover1 | 981:07ce7d9ed5ff | 380 | |
| rgrover1 | 981:07ce7d9ed5ff | 381 | # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) |
| rgrover1 | 981:07ce7d9ed5ff | 382 | # defined locally in source files will be included in the documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 383 | # If set to NO only classes defined in header files are included. |
| rgrover1 | 981:07ce7d9ed5ff | 384 | |
| rgrover1 | 981:07ce7d9ed5ff | 385 | EXTRACT_LOCAL_CLASSES = YES |
| rgrover1 | 981:07ce7d9ed5ff | 386 | |
| rgrover1 | 981:07ce7d9ed5ff | 387 | # This flag is only useful for Objective-C code. When set to YES local |
| rgrover1 | 981:07ce7d9ed5ff | 388 | # methods, which are defined in the implementation section but not in |
| rgrover1 | 981:07ce7d9ed5ff | 389 | # the interface are included in the documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 390 | # If set to NO (the default) only methods in the interface are included. |
| rgrover1 | 981:07ce7d9ed5ff | 391 | |
| rgrover1 | 981:07ce7d9ed5ff | 392 | EXTRACT_LOCAL_METHODS = YES |
| rgrover1 | 981:07ce7d9ed5ff | 393 | |
| rgrover1 | 981:07ce7d9ed5ff | 394 | # If this flag is set to YES, the members of anonymous namespaces will be |
| rgrover1 | 981:07ce7d9ed5ff | 395 | # extracted and appear in the documentation as a namespace called |
| rgrover1 | 981:07ce7d9ed5ff | 396 | # 'anonymous_namespace{file}', where file will be replaced with the base |
| rgrover1 | 981:07ce7d9ed5ff | 397 | # name of the file that contains the anonymous namespace. By default |
| rgrover1 | 981:07ce7d9ed5ff | 398 | # anonymous namespaces are hidden. |
| rgrover1 | 981:07ce7d9ed5ff | 399 | |
| rgrover1 | 981:07ce7d9ed5ff | 400 | EXTRACT_ANON_NSPACES = YES |
| rgrover1 | 981:07ce7d9ed5ff | 401 | |
| rgrover1 | 981:07ce7d9ed5ff | 402 | # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all |
| rgrover1 | 981:07ce7d9ed5ff | 403 | # undocumented members of documented classes, files or namespaces. |
| rgrover1 | 981:07ce7d9ed5ff | 404 | # If set to NO (the default) these members will be included in the |
| rgrover1 | 981:07ce7d9ed5ff | 405 | # various overviews, but no documentation section is generated. |
| rgrover1 | 981:07ce7d9ed5ff | 406 | # This option has no effect if EXTRACT_ALL is enabled. |
| rgrover1 | 981:07ce7d9ed5ff | 407 | |
| rgrover1 | 981:07ce7d9ed5ff | 408 | HIDE_UNDOC_MEMBERS = NO |
| rgrover1 | 981:07ce7d9ed5ff | 409 | |
| rgrover1 | 981:07ce7d9ed5ff | 410 | # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all |
| rgrover1 | 981:07ce7d9ed5ff | 411 | # undocumented classes that are normally visible in the class hierarchy. |
| rgrover1 | 981:07ce7d9ed5ff | 412 | # If set to NO (the default) these classes will be included in the various |
| rgrover1 | 981:07ce7d9ed5ff | 413 | # overviews. This option has no effect if EXTRACT_ALL is enabled. |
| rgrover1 | 981:07ce7d9ed5ff | 414 | |
| rgrover1 | 981:07ce7d9ed5ff | 415 | HIDE_UNDOC_CLASSES = NO |
| rgrover1 | 981:07ce7d9ed5ff | 416 | |
| rgrover1 | 981:07ce7d9ed5ff | 417 | # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all |
| rgrover1 | 981:07ce7d9ed5ff | 418 | # friend (class|struct|union) declarations. |
| rgrover1 | 981:07ce7d9ed5ff | 419 | # If set to NO (the default) these declarations will be included in the |
| rgrover1 | 981:07ce7d9ed5ff | 420 | # documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 421 | |
| rgrover1 | 981:07ce7d9ed5ff | 422 | HIDE_FRIEND_COMPOUNDS = NO |
| rgrover1 | 981:07ce7d9ed5ff | 423 | |
| rgrover1 | 981:07ce7d9ed5ff | 424 | # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any |
| rgrover1 | 981:07ce7d9ed5ff | 425 | # documentation blocks found inside the body of a function. |
| rgrover1 | 981:07ce7d9ed5ff | 426 | # If set to NO (the default) these blocks will be appended to the |
| rgrover1 | 981:07ce7d9ed5ff | 427 | # function's detailed documentation block. |
| rgrover1 | 981:07ce7d9ed5ff | 428 | |
| rgrover1 | 981:07ce7d9ed5ff | 429 | HIDE_IN_BODY_DOCS = NO |
| rgrover1 | 981:07ce7d9ed5ff | 430 | |
| rgrover1 | 981:07ce7d9ed5ff | 431 | # The INTERNAL_DOCS tag determines if documentation |
| rgrover1 | 981:07ce7d9ed5ff | 432 | # that is typed after a \internal command is included. If the tag is set |
| rgrover1 | 981:07ce7d9ed5ff | 433 | # to NO (the default) then the documentation will be excluded. |
| rgrover1 | 981:07ce7d9ed5ff | 434 | # Set it to YES to include the internal documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 435 | |
| rgrover1 | 981:07ce7d9ed5ff | 436 | INTERNAL_DOCS = NO |
| rgrover1 | 981:07ce7d9ed5ff | 437 | |
| rgrover1 | 981:07ce7d9ed5ff | 438 | # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate |
| rgrover1 | 981:07ce7d9ed5ff | 439 | # file names in lower-case letters. If set to YES upper-case letters are also |
| rgrover1 | 981:07ce7d9ed5ff | 440 | # allowed. This is useful if you have classes or files whose names only differ |
| rgrover1 | 981:07ce7d9ed5ff | 441 | # in case and if your file system supports case sensitive file names. Windows |
| rgrover1 | 981:07ce7d9ed5ff | 442 | # and Mac users are advised to set this option to NO. |
| rgrover1 | 981:07ce7d9ed5ff | 443 | |
| rgrover1 | 981:07ce7d9ed5ff | 444 | CASE_SENSE_NAMES = NO |
| rgrover1 | 981:07ce7d9ed5ff | 445 | |
| rgrover1 | 981:07ce7d9ed5ff | 446 | # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen |
| rgrover1 | 981:07ce7d9ed5ff | 447 | # will show members with their full class and namespace scopes in the |
| rgrover1 | 981:07ce7d9ed5ff | 448 | # documentation. If set to YES the scope will be hidden. |
| rgrover1 | 981:07ce7d9ed5ff | 449 | |
| rgrover1 | 981:07ce7d9ed5ff | 450 | HIDE_SCOPE_NAMES = NO |
| rgrover1 | 981:07ce7d9ed5ff | 451 | |
| rgrover1 | 981:07ce7d9ed5ff | 452 | # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen |
| rgrover1 | 981:07ce7d9ed5ff | 453 | # will put a list of the files that are included by a file in the documentation |
| rgrover1 | 981:07ce7d9ed5ff | 454 | # of that file. |
| rgrover1 | 981:07ce7d9ed5ff | 455 | |
| rgrover1 | 981:07ce7d9ed5ff | 456 | SHOW_INCLUDE_FILES = YES |
| rgrover1 | 981:07ce7d9ed5ff | 457 | |
| rgrover1 | 981:07ce7d9ed5ff | 458 | # If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen |
| rgrover1 | 981:07ce7d9ed5ff | 459 | # will list include files with double quotes in the documentation |
| rgrover1 | 981:07ce7d9ed5ff | 460 | # rather than with sharp brackets. |
| rgrover1 | 981:07ce7d9ed5ff | 461 | |
| rgrover1 | 981:07ce7d9ed5ff | 462 | FORCE_LOCAL_INCLUDES = NO |
| rgrover1 | 981:07ce7d9ed5ff | 463 | |
| rgrover1 | 981:07ce7d9ed5ff | 464 | # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] |
| rgrover1 | 981:07ce7d9ed5ff | 465 | # is inserted in the documentation for inline members. |
| rgrover1 | 981:07ce7d9ed5ff | 466 | |
| rgrover1 | 981:07ce7d9ed5ff | 467 | INLINE_INFO = YES |
| rgrover1 | 981:07ce7d9ed5ff | 468 | |
| rgrover1 | 981:07ce7d9ed5ff | 469 | # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen |
| rgrover1 | 981:07ce7d9ed5ff | 470 | # will sort the (detailed) documentation of file and class members |
| rgrover1 | 981:07ce7d9ed5ff | 471 | # alphabetically by member name. If set to NO the members will appear in |
| rgrover1 | 981:07ce7d9ed5ff | 472 | # declaration order. |
| rgrover1 | 981:07ce7d9ed5ff | 473 | |
| rgrover1 | 981:07ce7d9ed5ff | 474 | SORT_MEMBER_DOCS = YES |
| rgrover1 | 981:07ce7d9ed5ff | 475 | |
| rgrover1 | 981:07ce7d9ed5ff | 476 | # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the |
| rgrover1 | 981:07ce7d9ed5ff | 477 | # brief documentation of file, namespace and class members alphabetically |
| rgrover1 | 981:07ce7d9ed5ff | 478 | # by member name. If set to NO (the default) the members will appear in |
| rgrover1 | 981:07ce7d9ed5ff | 479 | # declaration order. |
| rgrover1 | 981:07ce7d9ed5ff | 480 | |
| rgrover1 | 981:07ce7d9ed5ff | 481 | SORT_BRIEF_DOCS = NO |
| rgrover1 | 981:07ce7d9ed5ff | 482 | |
| rgrover1 | 981:07ce7d9ed5ff | 483 | # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen |
| rgrover1 | 981:07ce7d9ed5ff | 484 | # will sort the (brief and detailed) documentation of class members so that |
| rgrover1 | 981:07ce7d9ed5ff | 485 | # constructors and destructors are listed first. If set to NO (the default) |
| rgrover1 | 981:07ce7d9ed5ff | 486 | # the constructors will appear in the respective orders defined by |
| rgrover1 | 981:07ce7d9ed5ff | 487 | # SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. |
| rgrover1 | 981:07ce7d9ed5ff | 488 | # This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO |
| rgrover1 | 981:07ce7d9ed5ff | 489 | # and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. |
| rgrover1 | 981:07ce7d9ed5ff | 490 | |
| rgrover1 | 981:07ce7d9ed5ff | 491 | SORT_MEMBERS_CTORS_1ST = NO |
| rgrover1 | 981:07ce7d9ed5ff | 492 | |
| rgrover1 | 981:07ce7d9ed5ff | 493 | # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the |
| rgrover1 | 981:07ce7d9ed5ff | 494 | # hierarchy of group names into alphabetical order. If set to NO (the default) |
| rgrover1 | 981:07ce7d9ed5ff | 495 | # the group names will appear in their defined order. |
| rgrover1 | 981:07ce7d9ed5ff | 496 | |
| rgrover1 | 981:07ce7d9ed5ff | 497 | SORT_GROUP_NAMES = NO |
| rgrover1 | 981:07ce7d9ed5ff | 498 | |
| rgrover1 | 981:07ce7d9ed5ff | 499 | # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be |
| rgrover1 | 981:07ce7d9ed5ff | 500 | # sorted by fully-qualified names, including namespaces. If set to |
| rgrover1 | 981:07ce7d9ed5ff | 501 | # NO (the default), the class list will be sorted only by class name, |
| rgrover1 | 981:07ce7d9ed5ff | 502 | # not including the namespace part. |
| rgrover1 | 981:07ce7d9ed5ff | 503 | # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. |
| rgrover1 | 981:07ce7d9ed5ff | 504 | # Note: This option applies only to the class list, not to the |
| rgrover1 | 981:07ce7d9ed5ff | 505 | # alphabetical list. |
| rgrover1 | 981:07ce7d9ed5ff | 506 | |
| rgrover1 | 981:07ce7d9ed5ff | 507 | SORT_BY_SCOPE_NAME = NO |
| rgrover1 | 981:07ce7d9ed5ff | 508 | |
| rgrover1 | 981:07ce7d9ed5ff | 509 | # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to |
| rgrover1 | 981:07ce7d9ed5ff | 510 | # do proper type resolution of all parameters of a function it will reject a |
| rgrover1 | 981:07ce7d9ed5ff | 511 | # match between the prototype and the implementation of a member function even |
| rgrover1 | 981:07ce7d9ed5ff | 512 | # if there is only one candidate or it is obvious which candidate to choose |
| rgrover1 | 981:07ce7d9ed5ff | 513 | # by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen |
| rgrover1 | 981:07ce7d9ed5ff | 514 | # will still accept a match between prototype and implementation in such cases. |
| rgrover1 | 981:07ce7d9ed5ff | 515 | |
| rgrover1 | 981:07ce7d9ed5ff | 516 | STRICT_PROTO_MATCHING = NO |
| rgrover1 | 981:07ce7d9ed5ff | 517 | |
| rgrover1 | 981:07ce7d9ed5ff | 518 | # The GENERATE_TODOLIST tag can be used to enable (YES) or |
| rgrover1 | 981:07ce7d9ed5ff | 519 | # disable (NO) the todo list. This list is created by putting \todo |
| rgrover1 | 981:07ce7d9ed5ff | 520 | # commands in the documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 521 | |
| rgrover1 | 981:07ce7d9ed5ff | 522 | GENERATE_TODOLIST = YES |
| rgrover1 | 981:07ce7d9ed5ff | 523 | |
| rgrover1 | 981:07ce7d9ed5ff | 524 | # The GENERATE_TESTLIST tag can be used to enable (YES) or |
| rgrover1 | 981:07ce7d9ed5ff | 525 | # disable (NO) the test list. This list is created by putting \test |
| rgrover1 | 981:07ce7d9ed5ff | 526 | # commands in the documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 527 | |
| rgrover1 | 981:07ce7d9ed5ff | 528 | GENERATE_TESTLIST = YES |
| rgrover1 | 981:07ce7d9ed5ff | 529 | |
| rgrover1 | 981:07ce7d9ed5ff | 530 | # The GENERATE_BUGLIST tag can be used to enable (YES) or |
| rgrover1 | 981:07ce7d9ed5ff | 531 | # disable (NO) the bug list. This list is created by putting \bug |
| rgrover1 | 981:07ce7d9ed5ff | 532 | # commands in the documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 533 | |
| rgrover1 | 981:07ce7d9ed5ff | 534 | GENERATE_BUGLIST = YES |
| rgrover1 | 981:07ce7d9ed5ff | 535 | |
| rgrover1 | 981:07ce7d9ed5ff | 536 | # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or |
| rgrover1 | 981:07ce7d9ed5ff | 537 | # disable (NO) the deprecated list. This list is created by putting |
| rgrover1 | 981:07ce7d9ed5ff | 538 | # \deprecated commands in the documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 539 | |
| rgrover1 | 981:07ce7d9ed5ff | 540 | GENERATE_DEPRECATEDLIST= YES |
| rgrover1 | 981:07ce7d9ed5ff | 541 | |
| rgrover1 | 981:07ce7d9ed5ff | 542 | # The ENABLED_SECTIONS tag can be used to enable conditional |
| rgrover1 | 981:07ce7d9ed5ff | 543 | # documentation sections, marked by \if section-label ... \endif |
| rgrover1 | 981:07ce7d9ed5ff | 544 | # and \cond section-label ... \endcond blocks. |
| rgrover1 | 981:07ce7d9ed5ff | 545 | |
| rgrover1 | 981:07ce7d9ed5ff | 546 | ENABLED_SECTIONS = |
| rgrover1 | 981:07ce7d9ed5ff | 547 | |
| rgrover1 | 981:07ce7d9ed5ff | 548 | # The MAX_INITIALIZER_LINES tag determines the maximum number of lines |
| rgrover1 | 981:07ce7d9ed5ff | 549 | # the initial value of a variable or macro consists of for it to appear in |
| rgrover1 | 981:07ce7d9ed5ff | 550 | # the documentation. If the initializer consists of more lines than specified |
| rgrover1 | 981:07ce7d9ed5ff | 551 | # here it will be hidden. Use a value of 0 to hide initializers completely. |
| rgrover1 | 981:07ce7d9ed5ff | 552 | # The appearance of the initializer of individual variables and macros in the |
| rgrover1 | 981:07ce7d9ed5ff | 553 | # documentation can be controlled using \showinitializer or \hideinitializer |
| rgrover1 | 981:07ce7d9ed5ff | 554 | # command in the documentation regardless of this setting. |
| rgrover1 | 981:07ce7d9ed5ff | 555 | |
| rgrover1 | 981:07ce7d9ed5ff | 556 | MAX_INITIALIZER_LINES = 30 |
| rgrover1 | 981:07ce7d9ed5ff | 557 | |
| rgrover1 | 981:07ce7d9ed5ff | 558 | # Set the SHOW_USED_FILES tag to NO to disable the list of files generated |
| rgrover1 | 981:07ce7d9ed5ff | 559 | # at the bottom of the documentation of classes and structs. If set to YES the |
| rgrover1 | 981:07ce7d9ed5ff | 560 | # list will mention the files that were used to generate the documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 561 | |
| rgrover1 | 981:07ce7d9ed5ff | 562 | SHOW_USED_FILES = YES |
| rgrover1 | 981:07ce7d9ed5ff | 563 | |
| rgrover1 | 981:07ce7d9ed5ff | 564 | # Set the SHOW_FILES tag to NO to disable the generation of the Files page. |
| rgrover1 | 981:07ce7d9ed5ff | 565 | # This will remove the Files entry from the Quick Index and from the |
| rgrover1 | 981:07ce7d9ed5ff | 566 | # Folder Tree View (if specified). The default is YES. |
| rgrover1 | 981:07ce7d9ed5ff | 567 | |
| rgrover1 | 981:07ce7d9ed5ff | 568 | SHOW_FILES = YES |
| rgrover1 | 981:07ce7d9ed5ff | 569 | |
| rgrover1 | 981:07ce7d9ed5ff | 570 | # Set the SHOW_NAMESPACES tag to NO to disable the generation of the |
| rgrover1 | 981:07ce7d9ed5ff | 571 | # Namespaces page. |
| rgrover1 | 981:07ce7d9ed5ff | 572 | # This will remove the Namespaces entry from the Quick Index |
| rgrover1 | 981:07ce7d9ed5ff | 573 | # and from the Folder Tree View (if specified). The default is YES. |
| rgrover1 | 981:07ce7d9ed5ff | 574 | |
| rgrover1 | 981:07ce7d9ed5ff | 575 | SHOW_NAMESPACES = YES |
| rgrover1 | 981:07ce7d9ed5ff | 576 | |
| rgrover1 | 981:07ce7d9ed5ff | 577 | # The FILE_VERSION_FILTER tag can be used to specify a program or script that |
| rgrover1 | 981:07ce7d9ed5ff | 578 | # doxygen should invoke to get the current version for each file (typically from |
| rgrover1 | 981:07ce7d9ed5ff | 579 | # the version control system). Doxygen will invoke the program by executing (via |
| rgrover1 | 981:07ce7d9ed5ff | 580 | # popen()) the command <command> <input-file>, where <command> is the value of |
| rgrover1 | 981:07ce7d9ed5ff | 581 | # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file |
| rgrover1 | 981:07ce7d9ed5ff | 582 | # provided by doxygen. Whatever the program writes to standard output |
| rgrover1 | 981:07ce7d9ed5ff | 583 | # is used as the file version. See the manual for examples. |
| rgrover1 | 981:07ce7d9ed5ff | 584 | |
| rgrover1 | 981:07ce7d9ed5ff | 585 | FILE_VERSION_FILTER = |
| rgrover1 | 981:07ce7d9ed5ff | 586 | |
| rgrover1 | 981:07ce7d9ed5ff | 587 | # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed |
| rgrover1 | 981:07ce7d9ed5ff | 588 | # by doxygen. The layout file controls the global structure of the generated |
| rgrover1 | 981:07ce7d9ed5ff | 589 | # output files in an output format independent way. To create the layout file |
| rgrover1 | 981:07ce7d9ed5ff | 590 | # that represents doxygen's defaults, run doxygen with the -l option. |
| rgrover1 | 981:07ce7d9ed5ff | 591 | # You can optionally specify a file name after the option, if omitted |
| rgrover1 | 981:07ce7d9ed5ff | 592 | # DoxygenLayout.xml will be used as the name of the layout file. |
| rgrover1 | 981:07ce7d9ed5ff | 593 | |
| rgrover1 | 981:07ce7d9ed5ff | 594 | LAYOUT_FILE = |
| rgrover1 | 981:07ce7d9ed5ff | 595 | |
| rgrover1 | 981:07ce7d9ed5ff | 596 | # The CITE_BIB_FILES tag can be used to specify one or more bib files |
| rgrover1 | 981:07ce7d9ed5ff | 597 | # containing the references data. This must be a list of .bib files. The |
| rgrover1 | 981:07ce7d9ed5ff | 598 | # .bib extension is automatically appended if omitted. Using this command |
| rgrover1 | 981:07ce7d9ed5ff | 599 | # requires the bibtex tool to be installed. See also |
| rgrover1 | 981:07ce7d9ed5ff | 600 | # http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style |
| rgrover1 | 981:07ce7d9ed5ff | 601 | # of the bibliography can be controlled using LATEX_BIB_STYLE. To use this |
| rgrover1 | 981:07ce7d9ed5ff | 602 | # feature you need bibtex and perl available in the search path. Do not use |
| rgrover1 | 981:07ce7d9ed5ff | 603 | # file names with spaces, bibtex cannot handle them. |
| rgrover1 | 981:07ce7d9ed5ff | 604 | |
| rgrover1 | 981:07ce7d9ed5ff | 605 | CITE_BIB_FILES = |
| rgrover1 | 981:07ce7d9ed5ff | 606 | |
| rgrover1 | 981:07ce7d9ed5ff | 607 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 608 | # configuration options related to warning and progress messages |
| rgrover1 | 981:07ce7d9ed5ff | 609 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 610 | |
| rgrover1 | 981:07ce7d9ed5ff | 611 | # The QUIET tag can be used to turn on/off the messages that are generated |
| rgrover1 | 981:07ce7d9ed5ff | 612 | # by doxygen. Possible values are YES and NO. If left blank NO is used. |
| rgrover1 | 981:07ce7d9ed5ff | 613 | |
| rgrover1 | 981:07ce7d9ed5ff | 614 | QUIET = NO |
| rgrover1 | 981:07ce7d9ed5ff | 615 | |
| rgrover1 | 981:07ce7d9ed5ff | 616 | # The WARNINGS tag can be used to turn on/off the warning messages that are |
| rgrover1 | 981:07ce7d9ed5ff | 617 | # generated by doxygen. Possible values are YES and NO. If left blank |
| rgrover1 | 981:07ce7d9ed5ff | 618 | # NO is used. |
| rgrover1 | 981:07ce7d9ed5ff | 619 | |
| rgrover1 | 981:07ce7d9ed5ff | 620 | WARNINGS = YES |
| rgrover1 | 981:07ce7d9ed5ff | 621 | |
| rgrover1 | 981:07ce7d9ed5ff | 622 | # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings |
| rgrover1 | 981:07ce7d9ed5ff | 623 | # for undocumented members. If EXTRACT_ALL is set to YES then this flag will |
| rgrover1 | 981:07ce7d9ed5ff | 624 | # automatically be disabled. |
| rgrover1 | 981:07ce7d9ed5ff | 625 | |
| rgrover1 | 981:07ce7d9ed5ff | 626 | WARN_IF_UNDOCUMENTED = YES |
| rgrover1 | 981:07ce7d9ed5ff | 627 | |
| rgrover1 | 981:07ce7d9ed5ff | 628 | # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for |
| rgrover1 | 981:07ce7d9ed5ff | 629 | # potential errors in the documentation, such as not documenting some |
| rgrover1 | 981:07ce7d9ed5ff | 630 | # parameters in a documented function, or documenting parameters that |
| rgrover1 | 981:07ce7d9ed5ff | 631 | # don't exist or using markup commands wrongly. |
| rgrover1 | 981:07ce7d9ed5ff | 632 | |
| rgrover1 | 981:07ce7d9ed5ff | 633 | WARN_IF_DOC_ERROR = YES |
| rgrover1 | 981:07ce7d9ed5ff | 634 | |
| rgrover1 | 981:07ce7d9ed5ff | 635 | # The WARN_NO_PARAMDOC option can be enabled to get warnings for |
| rgrover1 | 981:07ce7d9ed5ff | 636 | # functions that are documented, but have no documentation for their parameters |
| rgrover1 | 981:07ce7d9ed5ff | 637 | # or return value. If set to NO (the default) doxygen will only warn about |
| rgrover1 | 981:07ce7d9ed5ff | 638 | # wrong or incomplete parameter documentation, but not about the absence of |
| rgrover1 | 981:07ce7d9ed5ff | 639 | # documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 640 | |
| rgrover1 | 981:07ce7d9ed5ff | 641 | WARN_NO_PARAMDOC = NO |
| rgrover1 | 981:07ce7d9ed5ff | 642 | |
| rgrover1 | 981:07ce7d9ed5ff | 643 | # The WARN_FORMAT tag determines the format of the warning messages that |
| rgrover1 | 981:07ce7d9ed5ff | 644 | # doxygen can produce. The string should contain the $file, $line, and $text |
| rgrover1 | 981:07ce7d9ed5ff | 645 | # tags, which will be replaced by the file and line number from which the |
| rgrover1 | 981:07ce7d9ed5ff | 646 | # warning originated and the warning text. Optionally the format may contain |
| rgrover1 | 981:07ce7d9ed5ff | 647 | # $version, which will be replaced by the version of the file (if it could |
| rgrover1 | 981:07ce7d9ed5ff | 648 | # be obtained via FILE_VERSION_FILTER) |
| rgrover1 | 981:07ce7d9ed5ff | 649 | |
| rgrover1 | 981:07ce7d9ed5ff | 650 | WARN_FORMAT = "$file:$line: $text" |
| rgrover1 | 981:07ce7d9ed5ff | 651 | |
| rgrover1 | 981:07ce7d9ed5ff | 652 | # The WARN_LOGFILE tag can be used to specify a file to which warning |
| rgrover1 | 981:07ce7d9ed5ff | 653 | # and error messages should be written. If left blank the output is written |
| rgrover1 | 981:07ce7d9ed5ff | 654 | # to stderr. |
| rgrover1 | 981:07ce7d9ed5ff | 655 | |
| rgrover1 | 981:07ce7d9ed5ff | 656 | WARN_LOGFILE = |
| rgrover1 | 981:07ce7d9ed5ff | 657 | |
| rgrover1 | 981:07ce7d9ed5ff | 658 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 659 | # configuration options related to the input files |
| rgrover1 | 981:07ce7d9ed5ff | 660 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 661 | |
| rgrover1 | 981:07ce7d9ed5ff | 662 | # The INPUT tag can be used to specify the files and/or directories that contain |
| rgrover1 | 981:07ce7d9ed5ff | 663 | # documented source files. You may enter file names like "myfile.cpp" or |
| rgrover1 | 981:07ce7d9ed5ff | 664 | # directories like "/usr/src/myproject". Separate the files or directories |
| rgrover1 | 981:07ce7d9ed5ff | 665 | # with spaces. |
| rgrover1 | 981:07ce7d9ed5ff | 666 | |
| rgrover1 | 981:07ce7d9ed5ff | 667 | INPUT = |
| rgrover1 | 981:07ce7d9ed5ff | 668 | |
| rgrover1 | 981:07ce7d9ed5ff | 669 | # This tag can be used to specify the character encoding of the source files |
| rgrover1 | 981:07ce7d9ed5ff | 670 | # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is |
| rgrover1 | 981:07ce7d9ed5ff | 671 | # also the default input encoding. Doxygen uses libiconv (or the iconv built |
| rgrover1 | 981:07ce7d9ed5ff | 672 | # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for |
| rgrover1 | 981:07ce7d9ed5ff | 673 | # the list of possible encodings. |
| rgrover1 | 981:07ce7d9ed5ff | 674 | |
| rgrover1 | 981:07ce7d9ed5ff | 675 | INPUT_ENCODING = UTF-8 |
| rgrover1 | 981:07ce7d9ed5ff | 676 | |
| rgrover1 | 981:07ce7d9ed5ff | 677 | # If the value of the INPUT tag contains directories, you can use the |
| rgrover1 | 981:07ce7d9ed5ff | 678 | # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp |
| rgrover1 | 981:07ce7d9ed5ff | 679 | # and *.h) to filter out the source-files in the directories. If left |
| rgrover1 | 981:07ce7d9ed5ff | 680 | # blank the following patterns are tested: |
| rgrover1 | 981:07ce7d9ed5ff | 681 | # *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh |
| rgrover1 | 981:07ce7d9ed5ff | 682 | # *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py |
| rgrover1 | 981:07ce7d9ed5ff | 683 | # *.f90 *.f *.for *.vhd *.vhdl |
| rgrover1 | 981:07ce7d9ed5ff | 684 | |
| rgrover1 | 981:07ce7d9ed5ff | 685 | FILE_PATTERNS = *.h *.cpp *.md |
| rgrover1 | 981:07ce7d9ed5ff | 686 | |
| rgrover1 | 981:07ce7d9ed5ff | 687 | # The RECURSIVE tag can be used to turn specify whether or not subdirectories |
| rgrover1 | 981:07ce7d9ed5ff | 688 | # should be searched for input files as well. Possible values are YES and NO. |
| rgrover1 | 981:07ce7d9ed5ff | 689 | # If left blank NO is used. |
| rgrover1 | 981:07ce7d9ed5ff | 690 | |
| rgrover1 | 981:07ce7d9ed5ff | 691 | RECURSIVE = YES |
| rgrover1 | 981:07ce7d9ed5ff | 692 | |
| rgrover1 | 981:07ce7d9ed5ff | 693 | # The EXCLUDE tag can be used to specify files and/or directories that should be |
| rgrover1 | 981:07ce7d9ed5ff | 694 | # excluded from the INPUT source files. This way you can easily exclude a |
| rgrover1 | 981:07ce7d9ed5ff | 695 | # subdirectory from a directory tree whose root is specified with the INPUT tag. |
| rgrover1 | 981:07ce7d9ed5ff | 696 | # Note that relative paths are relative to the directory from which doxygen is |
| rgrover1 | 981:07ce7d9ed5ff | 697 | # run. |
| rgrover1 | 981:07ce7d9ed5ff | 698 | |
| rgrover1 | 981:07ce7d9ed5ff | 699 | EXCLUDE = configs |
| rgrover1 | 981:07ce7d9ed5ff | 700 | |
| rgrover1 | 981:07ce7d9ed5ff | 701 | # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or |
| rgrover1 | 981:07ce7d9ed5ff | 702 | # directories that are symbolic links (a Unix file system feature) are excluded |
| rgrover1 | 981:07ce7d9ed5ff | 703 | # from the input. |
| rgrover1 | 981:07ce7d9ed5ff | 704 | |
| rgrover1 | 981:07ce7d9ed5ff | 705 | EXCLUDE_SYMLINKS = NO |
| rgrover1 | 981:07ce7d9ed5ff | 706 | |
| rgrover1 | 981:07ce7d9ed5ff | 707 | # If the value of the INPUT tag contains directories, you can use the |
| rgrover1 | 981:07ce7d9ed5ff | 708 | # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude |
| rgrover1 | 981:07ce7d9ed5ff | 709 | # certain files from those directories. Note that the wildcards are matched |
| rgrover1 | 981:07ce7d9ed5ff | 710 | # against the file with absolute path, so to exclude all test directories |
| rgrover1 | 981:07ce7d9ed5ff | 711 | # for example use the pattern */test/* |
| rgrover1 | 981:07ce7d9ed5ff | 712 | |
| rgrover1 | 981:07ce7d9ed5ff | 713 | EXCLUDE_PATTERNS = |
| rgrover1 | 981:07ce7d9ed5ff | 714 | |
| rgrover1 | 981:07ce7d9ed5ff | 715 | # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names |
| rgrover1 | 981:07ce7d9ed5ff | 716 | # (namespaces, classes, functions, etc.) that should be excluded from the |
| rgrover1 | 981:07ce7d9ed5ff | 717 | # output. The symbol name can be a fully qualified name, a word, or if the |
| rgrover1 | 981:07ce7d9ed5ff | 718 | # wildcard * is used, a substring. Examples: ANamespace, AClass, |
| rgrover1 | 981:07ce7d9ed5ff | 719 | # AClass::ANamespace, ANamespace::*Test |
| rgrover1 | 981:07ce7d9ed5ff | 720 | |
| rgrover1 | 981:07ce7d9ed5ff | 721 | EXCLUDE_SYMBOLS = |
| rgrover1 | 981:07ce7d9ed5ff | 722 | |
| rgrover1 | 981:07ce7d9ed5ff | 723 | # The EXAMPLE_PATH tag can be used to specify one or more files or |
| rgrover1 | 981:07ce7d9ed5ff | 724 | # directories that contain example code fragments that are included (see |
| rgrover1 | 981:07ce7d9ed5ff | 725 | # the \include command). |
| rgrover1 | 981:07ce7d9ed5ff | 726 | |
| rgrover1 | 981:07ce7d9ed5ff | 727 | EXAMPLE_PATH = |
| rgrover1 | 981:07ce7d9ed5ff | 728 | |
| rgrover1 | 981:07ce7d9ed5ff | 729 | # If the value of the EXAMPLE_PATH tag contains directories, you can use the |
| rgrover1 | 981:07ce7d9ed5ff | 730 | # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp |
| rgrover1 | 981:07ce7d9ed5ff | 731 | # and *.h) to filter out the source-files in the directories. If left |
| rgrover1 | 981:07ce7d9ed5ff | 732 | # blank all files are included. |
| rgrover1 | 981:07ce7d9ed5ff | 733 | |
| rgrover1 | 981:07ce7d9ed5ff | 734 | EXAMPLE_PATTERNS = * |
| rgrover1 | 981:07ce7d9ed5ff | 735 | |
| rgrover1 | 981:07ce7d9ed5ff | 736 | # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be |
| rgrover1 | 981:07ce7d9ed5ff | 737 | # searched for input files to be used with the \include or \dontinclude |
| rgrover1 | 981:07ce7d9ed5ff | 738 | # commands irrespective of the value of the RECURSIVE tag. |
| rgrover1 | 981:07ce7d9ed5ff | 739 | # Possible values are YES and NO. If left blank NO is used. |
| rgrover1 | 981:07ce7d9ed5ff | 740 | |
| rgrover1 | 981:07ce7d9ed5ff | 741 | EXAMPLE_RECURSIVE = NO |
| rgrover1 | 981:07ce7d9ed5ff | 742 | |
| rgrover1 | 981:07ce7d9ed5ff | 743 | # The IMAGE_PATH tag can be used to specify one or more files or |
| rgrover1 | 981:07ce7d9ed5ff | 744 | # directories that contain image that are included in the documentation (see |
| rgrover1 | 981:07ce7d9ed5ff | 745 | # the \image command). |
| rgrover1 | 981:07ce7d9ed5ff | 746 | |
| rgrover1 | 981:07ce7d9ed5ff | 747 | IMAGE_PATH = |
| rgrover1 | 981:07ce7d9ed5ff | 748 | |
| rgrover1 | 981:07ce7d9ed5ff | 749 | # The INPUT_FILTER tag can be used to specify a program that doxygen should |
| rgrover1 | 981:07ce7d9ed5ff | 750 | # invoke to filter for each input file. Doxygen will invoke the filter program |
| rgrover1 | 981:07ce7d9ed5ff | 751 | # by executing (via popen()) the command <filter> <input-file>, where <filter> |
| rgrover1 | 981:07ce7d9ed5ff | 752 | # is the value of the INPUT_FILTER tag, and <input-file> is the name of an |
| rgrover1 | 981:07ce7d9ed5ff | 753 | # input file. Doxygen will then use the output that the filter program writes |
| rgrover1 | 981:07ce7d9ed5ff | 754 | # to standard output. |
| rgrover1 | 981:07ce7d9ed5ff | 755 | # If FILTER_PATTERNS is specified, this tag will be ignored. |
| rgrover1 | 981:07ce7d9ed5ff | 756 | # Note that the filter must not add or remove lines; it is applied before the |
| rgrover1 | 981:07ce7d9ed5ff | 757 | # code is scanned, but not when the output code is generated. If lines are added |
| rgrover1 | 981:07ce7d9ed5ff | 758 | # or removed, the anchors will not be placed correctly. |
| rgrover1 | 981:07ce7d9ed5ff | 759 | |
| rgrover1 | 981:07ce7d9ed5ff | 760 | INPUT_FILTER = |
| rgrover1 | 981:07ce7d9ed5ff | 761 | |
| rgrover1 | 981:07ce7d9ed5ff | 762 | # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern |
| rgrover1 | 981:07ce7d9ed5ff | 763 | # basis. |
| rgrover1 | 981:07ce7d9ed5ff | 764 | # Doxygen will compare the file name with each pattern and apply the |
| rgrover1 | 981:07ce7d9ed5ff | 765 | # filter if there is a match. |
| rgrover1 | 981:07ce7d9ed5ff | 766 | # The filters are a list of the form: |
| rgrover1 | 981:07ce7d9ed5ff | 767 | # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further |
| rgrover1 | 981:07ce7d9ed5ff | 768 | # info on how filters are used. If FILTER_PATTERNS is empty or if |
| rgrover1 | 981:07ce7d9ed5ff | 769 | # non of the patterns match the file name, INPUT_FILTER is applied. |
| rgrover1 | 981:07ce7d9ed5ff | 770 | |
| rgrover1 | 981:07ce7d9ed5ff | 771 | FILTER_PATTERNS = |
| rgrover1 | 981:07ce7d9ed5ff | 772 | |
| rgrover1 | 981:07ce7d9ed5ff | 773 | # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using |
| rgrover1 | 981:07ce7d9ed5ff | 774 | # INPUT_FILTER) will be used to filter the input files when producing source |
| rgrover1 | 981:07ce7d9ed5ff | 775 | # files to browse (i.e. when SOURCE_BROWSER is set to YES). |
| rgrover1 | 981:07ce7d9ed5ff | 776 | |
| rgrover1 | 981:07ce7d9ed5ff | 777 | FILTER_SOURCE_FILES = NO |
| rgrover1 | 981:07ce7d9ed5ff | 778 | |
| rgrover1 | 981:07ce7d9ed5ff | 779 | # The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file |
| rgrover1 | 981:07ce7d9ed5ff | 780 | # pattern. A pattern will override the setting for FILTER_PATTERN (if any) |
| rgrover1 | 981:07ce7d9ed5ff | 781 | # and it is also possible to disable source filtering for a specific pattern |
| rgrover1 | 981:07ce7d9ed5ff | 782 | # using *.ext= (so without naming a filter). This option only has effect when |
| rgrover1 | 981:07ce7d9ed5ff | 783 | # FILTER_SOURCE_FILES is enabled. |
| rgrover1 | 981:07ce7d9ed5ff | 784 | |
| rgrover1 | 981:07ce7d9ed5ff | 785 | FILTER_SOURCE_PATTERNS = |
| rgrover1 | 981:07ce7d9ed5ff | 786 | |
| rgrover1 | 981:07ce7d9ed5ff | 787 | # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that |
| rgrover1 | 981:07ce7d9ed5ff | 788 | # is part of the input, its contents will be placed on the main page |
| rgrover1 | 981:07ce7d9ed5ff | 789 | # (index.html). This can be useful if you have a project on for instance GitHub |
| rgrover1 | 981:07ce7d9ed5ff | 790 | # and want reuse the introduction page also for the doxygen output. |
| rgrover1 | 981:07ce7d9ed5ff | 791 | |
| rgrover1 | 981:07ce7d9ed5ff | 792 | USE_MDFILE_AS_MAINPAGE = DOXYGEN_FRONTPAGE.md |
| rgrover1 | 981:07ce7d9ed5ff | 793 | |
| rgrover1 | 981:07ce7d9ed5ff | 794 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 795 | # configuration options related to source browsing |
| rgrover1 | 981:07ce7d9ed5ff | 796 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 797 | |
| rgrover1 | 981:07ce7d9ed5ff | 798 | # If the SOURCE_BROWSER tag is set to YES then a list of source files will |
| rgrover1 | 981:07ce7d9ed5ff | 799 | # be generated. Documented entities will be cross-referenced with these sources. |
| rgrover1 | 981:07ce7d9ed5ff | 800 | # Note: To get rid of all source code in the generated output, make sure also |
| rgrover1 | 981:07ce7d9ed5ff | 801 | # VERBATIM_HEADERS is set to NO. |
| rgrover1 | 981:07ce7d9ed5ff | 802 | |
| rgrover1 | 981:07ce7d9ed5ff | 803 | SOURCE_BROWSER = YES |
| rgrover1 | 981:07ce7d9ed5ff | 804 | |
| rgrover1 | 981:07ce7d9ed5ff | 805 | # Setting the INLINE_SOURCES tag to YES will include the body |
| rgrover1 | 981:07ce7d9ed5ff | 806 | # of functions and classes directly in the documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 807 | |
| rgrover1 | 981:07ce7d9ed5ff | 808 | INLINE_SOURCES = NO |
| rgrover1 | 981:07ce7d9ed5ff | 809 | |
| rgrover1 | 981:07ce7d9ed5ff | 810 | # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct |
| rgrover1 | 981:07ce7d9ed5ff | 811 | # doxygen to hide any special comment blocks from generated source code |
| rgrover1 | 981:07ce7d9ed5ff | 812 | # fragments. Normal C, C++ and Fortran comments will always remain visible. |
| rgrover1 | 981:07ce7d9ed5ff | 813 | |
| rgrover1 | 981:07ce7d9ed5ff | 814 | STRIP_CODE_COMMENTS = YES |
| rgrover1 | 981:07ce7d9ed5ff | 815 | |
| rgrover1 | 981:07ce7d9ed5ff | 816 | # If the REFERENCED_BY_RELATION tag is set to YES |
| rgrover1 | 981:07ce7d9ed5ff | 817 | # then for each documented function all documented |
| rgrover1 | 981:07ce7d9ed5ff | 818 | # functions referencing it will be listed. |
| rgrover1 | 981:07ce7d9ed5ff | 819 | |
| rgrover1 | 981:07ce7d9ed5ff | 820 | REFERENCED_BY_RELATION = YES |
| rgrover1 | 981:07ce7d9ed5ff | 821 | |
| rgrover1 | 981:07ce7d9ed5ff | 822 | # If the REFERENCES_RELATION tag is set to YES |
| rgrover1 | 981:07ce7d9ed5ff | 823 | # then for each documented function all documented entities |
| rgrover1 | 981:07ce7d9ed5ff | 824 | # called/used by that function will be listed. |
| rgrover1 | 981:07ce7d9ed5ff | 825 | |
| rgrover1 | 981:07ce7d9ed5ff | 826 | REFERENCES_RELATION = YES |
| rgrover1 | 981:07ce7d9ed5ff | 827 | |
| rgrover1 | 981:07ce7d9ed5ff | 828 | # If the REFERENCES_LINK_SOURCE tag is set to YES (the default) |
| rgrover1 | 981:07ce7d9ed5ff | 829 | # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from |
| rgrover1 | 981:07ce7d9ed5ff | 830 | # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will |
| rgrover1 | 981:07ce7d9ed5ff | 831 | # link to the source code. |
| rgrover1 | 981:07ce7d9ed5ff | 832 | # Otherwise they will link to the documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 833 | |
| rgrover1 | 981:07ce7d9ed5ff | 834 | REFERENCES_LINK_SOURCE = YES |
| rgrover1 | 981:07ce7d9ed5ff | 835 | |
| rgrover1 | 981:07ce7d9ed5ff | 836 | # If the USE_HTAGS tag is set to YES then the references to source code |
| rgrover1 | 981:07ce7d9ed5ff | 837 | # will point to the HTML generated by the htags(1) tool instead of doxygen |
| rgrover1 | 981:07ce7d9ed5ff | 838 | # built-in source browser. The htags tool is part of GNU's global source |
| rgrover1 | 981:07ce7d9ed5ff | 839 | # tagging system (see http://www.gnu.org/software/global/global.html). You |
| rgrover1 | 981:07ce7d9ed5ff | 840 | # will need version 4.8.6 or higher. |
| rgrover1 | 981:07ce7d9ed5ff | 841 | |
| rgrover1 | 981:07ce7d9ed5ff | 842 | USE_HTAGS = NO |
| rgrover1 | 981:07ce7d9ed5ff | 843 | |
| rgrover1 | 981:07ce7d9ed5ff | 844 | # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen |
| rgrover1 | 981:07ce7d9ed5ff | 845 | # will generate a verbatim copy of the header file for each class for |
| rgrover1 | 981:07ce7d9ed5ff | 846 | # which an include is specified. Set to NO to disable this. |
| rgrover1 | 981:07ce7d9ed5ff | 847 | |
| rgrover1 | 981:07ce7d9ed5ff | 848 | VERBATIM_HEADERS = YES |
| rgrover1 | 981:07ce7d9ed5ff | 849 | |
| rgrover1 | 981:07ce7d9ed5ff | 850 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 851 | # configuration options related to the alphabetical class index |
| rgrover1 | 981:07ce7d9ed5ff | 852 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 853 | |
| rgrover1 | 981:07ce7d9ed5ff | 854 | # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index |
| rgrover1 | 981:07ce7d9ed5ff | 855 | # of all compounds will be generated. Enable this if the project |
| rgrover1 | 981:07ce7d9ed5ff | 856 | # contains a lot of classes, structs, unions or interfaces. |
| rgrover1 | 981:07ce7d9ed5ff | 857 | |
| rgrover1 | 981:07ce7d9ed5ff | 858 | ALPHABETICAL_INDEX = NO |
| rgrover1 | 981:07ce7d9ed5ff | 859 | |
| rgrover1 | 981:07ce7d9ed5ff | 860 | # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then |
| rgrover1 | 981:07ce7d9ed5ff | 861 | # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns |
| rgrover1 | 981:07ce7d9ed5ff | 862 | # in which this list will be split (can be a number in the range [1..20]) |
| rgrover1 | 981:07ce7d9ed5ff | 863 | |
| rgrover1 | 981:07ce7d9ed5ff | 864 | COLS_IN_ALPHA_INDEX = 5 |
| rgrover1 | 981:07ce7d9ed5ff | 865 | |
| rgrover1 | 981:07ce7d9ed5ff | 866 | # In case all classes in a project start with a common prefix, all |
| rgrover1 | 981:07ce7d9ed5ff | 867 | # classes will be put under the same header in the alphabetical index. |
| rgrover1 | 981:07ce7d9ed5ff | 868 | # The IGNORE_PREFIX tag can be used to specify one or more prefixes that |
| rgrover1 | 981:07ce7d9ed5ff | 869 | # should be ignored while generating the index headers. |
| rgrover1 | 981:07ce7d9ed5ff | 870 | |
| rgrover1 | 981:07ce7d9ed5ff | 871 | IGNORE_PREFIX = |
| rgrover1 | 981:07ce7d9ed5ff | 872 | |
| rgrover1 | 981:07ce7d9ed5ff | 873 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 874 | # configuration options related to the HTML output |
| rgrover1 | 981:07ce7d9ed5ff | 875 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 876 | |
| rgrover1 | 981:07ce7d9ed5ff | 877 | # If the GENERATE_HTML tag is set to YES (the default) Doxygen will |
| rgrover1 | 981:07ce7d9ed5ff | 878 | # generate HTML output. |
| rgrover1 | 981:07ce7d9ed5ff | 879 | |
| rgrover1 | 981:07ce7d9ed5ff | 880 | GENERATE_HTML = YES |
| rgrover1 | 981:07ce7d9ed5ff | 881 | |
| rgrover1 | 981:07ce7d9ed5ff | 882 | # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. |
| rgrover1 | 981:07ce7d9ed5ff | 883 | # If a relative path is entered the value of OUTPUT_DIRECTORY will be |
| rgrover1 | 981:07ce7d9ed5ff | 884 | # put in front of it. If left blank `html' will be used as the default path. |
| rgrover1 | 981:07ce7d9ed5ff | 885 | |
| rgrover1 | 981:07ce7d9ed5ff | 886 | HTML_OUTPUT = . |
| rgrover1 | 981:07ce7d9ed5ff | 887 | |
| rgrover1 | 981:07ce7d9ed5ff | 888 | # The HTML_FILE_EXTENSION tag can be used to specify the file extension for |
| rgrover1 | 981:07ce7d9ed5ff | 889 | # each generated HTML page (for example: .htm,.php,.asp). If it is left blank |
| rgrover1 | 981:07ce7d9ed5ff | 890 | # doxygen will generate files with .html extension. |
| rgrover1 | 981:07ce7d9ed5ff | 891 | |
| rgrover1 | 981:07ce7d9ed5ff | 892 | HTML_FILE_EXTENSION = .html |
| rgrover1 | 981:07ce7d9ed5ff | 893 | |
| rgrover1 | 981:07ce7d9ed5ff | 894 | # The HTML_HEADER tag can be used to specify a personal HTML header for |
| rgrover1 | 981:07ce7d9ed5ff | 895 | # each generated HTML page. If it is left blank doxygen will generate a |
| rgrover1 | 981:07ce7d9ed5ff | 896 | # standard header. Note that when using a custom header you are responsible |
| rgrover1 | 981:07ce7d9ed5ff | 897 | # for the proper inclusion of any scripts and style sheets that doxygen |
| rgrover1 | 981:07ce7d9ed5ff | 898 | # needs, which is dependent on the configuration options used. |
| rgrover1 | 981:07ce7d9ed5ff | 899 | # It is advised to generate a default header using "doxygen -w html |
| rgrover1 | 981:07ce7d9ed5ff | 900 | # header.html footer.html stylesheet.css YourConfigFile" and then modify |
| rgrover1 | 981:07ce7d9ed5ff | 901 | # that header. Note that the header is subject to change so you typically |
| rgrover1 | 981:07ce7d9ed5ff | 902 | # have to redo this when upgrading to a newer version of doxygen or when |
| rgrover1 | 981:07ce7d9ed5ff | 903 | # changing the value of configuration settings such as GENERATE_TREEVIEW! |
| rgrover1 | 981:07ce7d9ed5ff | 904 | |
| rgrover1 | 981:07ce7d9ed5ff | 905 | HTML_HEADER = |
| rgrover1 | 981:07ce7d9ed5ff | 906 | |
| rgrover1 | 981:07ce7d9ed5ff | 907 | # The HTML_FOOTER tag can be used to specify a personal HTML footer for |
| rgrover1 | 981:07ce7d9ed5ff | 908 | # each generated HTML page. If it is left blank doxygen will generate a |
| rgrover1 | 981:07ce7d9ed5ff | 909 | # standard footer. |
| rgrover1 | 981:07ce7d9ed5ff | 910 | |
| rgrover1 | 981:07ce7d9ed5ff | 911 | HTML_FOOTER = |
| rgrover1 | 981:07ce7d9ed5ff | 912 | |
| rgrover1 | 981:07ce7d9ed5ff | 913 | # The HTML_STYLESHEET tag can be used to specify a user-defined cascading |
| rgrover1 | 981:07ce7d9ed5ff | 914 | # style sheet that is used by each HTML page. It can be used to |
| rgrover1 | 981:07ce7d9ed5ff | 915 | # fine-tune the look of the HTML output. If left blank doxygen will |
| rgrover1 | 981:07ce7d9ed5ff | 916 | # generate a default style sheet. Note that it is recommended to use |
| rgrover1 | 981:07ce7d9ed5ff | 917 | # HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this |
| rgrover1 | 981:07ce7d9ed5ff | 918 | # tag will in the future become obsolete. |
| rgrover1 | 981:07ce7d9ed5ff | 919 | |
| rgrover1 | 981:07ce7d9ed5ff | 920 | HTML_STYLESHEET = |
| rgrover1 | 981:07ce7d9ed5ff | 921 | |
| rgrover1 | 981:07ce7d9ed5ff | 922 | # The HTML_EXTRA_STYLESHEET tag can be used to specify an additional |
| rgrover1 | 981:07ce7d9ed5ff | 923 | # user-defined cascading style sheet that is included after the standard |
| rgrover1 | 981:07ce7d9ed5ff | 924 | # style sheets created by doxygen. Using this option one can overrule |
| rgrover1 | 981:07ce7d9ed5ff | 925 | # certain style aspects. This is preferred over using HTML_STYLESHEET |
| rgrover1 | 981:07ce7d9ed5ff | 926 | # since it does not replace the standard style sheet and is therefor more |
| rgrover1 | 981:07ce7d9ed5ff | 927 | # robust against future updates. Doxygen will copy the style sheet file to |
| rgrover1 | 981:07ce7d9ed5ff | 928 | # the output directory. |
| rgrover1 | 981:07ce7d9ed5ff | 929 | |
| rgrover1 | 981:07ce7d9ed5ff | 930 | HTML_EXTRA_STYLESHEET = |
| rgrover1 | 981:07ce7d9ed5ff | 931 | |
| rgrover1 | 981:07ce7d9ed5ff | 932 | # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or |
| rgrover1 | 981:07ce7d9ed5ff | 933 | # other source files which should be copied to the HTML output directory. Note |
| rgrover1 | 981:07ce7d9ed5ff | 934 | # that these files will be copied to the base HTML output directory. Use the |
| rgrover1 | 981:07ce7d9ed5ff | 935 | # $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these |
| rgrover1 | 981:07ce7d9ed5ff | 936 | # files. In the HTML_STYLESHEET file, use the file name only. Also note that |
| rgrover1 | 981:07ce7d9ed5ff | 937 | # the files will be copied as-is; there are no commands or markers available. |
| rgrover1 | 981:07ce7d9ed5ff | 938 | |
| rgrover1 | 981:07ce7d9ed5ff | 939 | HTML_EXTRA_FILES = |
| rgrover1 | 981:07ce7d9ed5ff | 940 | |
| rgrover1 | 981:07ce7d9ed5ff | 941 | # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. |
| rgrover1 | 981:07ce7d9ed5ff | 942 | # Doxygen will adjust the colors in the style sheet and background images |
| rgrover1 | 981:07ce7d9ed5ff | 943 | # according to this color. Hue is specified as an angle on a colorwheel, |
| rgrover1 | 981:07ce7d9ed5ff | 944 | # see http://en.wikipedia.org/wiki/Hue for more information. |
| rgrover1 | 981:07ce7d9ed5ff | 945 | # For instance the value 0 represents red, 60 is yellow, 120 is green, |
| rgrover1 | 981:07ce7d9ed5ff | 946 | # 180 is cyan, 240 is blue, 300 purple, and 360 is red again. |
| rgrover1 | 981:07ce7d9ed5ff | 947 | # The allowed range is 0 to 359. |
| rgrover1 | 981:07ce7d9ed5ff | 948 | |
| rgrover1 | 981:07ce7d9ed5ff | 949 | HTML_COLORSTYLE_HUE = 220 |
| rgrover1 | 981:07ce7d9ed5ff | 950 | |
| rgrover1 | 981:07ce7d9ed5ff | 951 | # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of |
| rgrover1 | 981:07ce7d9ed5ff | 952 | # the colors in the HTML output. For a value of 0 the output will use |
| rgrover1 | 981:07ce7d9ed5ff | 953 | # grayscales only. A value of 255 will produce the most vivid colors. |
| rgrover1 | 981:07ce7d9ed5ff | 954 | |
| rgrover1 | 981:07ce7d9ed5ff | 955 | HTML_COLORSTYLE_SAT = 100 |
| rgrover1 | 981:07ce7d9ed5ff | 956 | |
| rgrover1 | 981:07ce7d9ed5ff | 957 | # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to |
| rgrover1 | 981:07ce7d9ed5ff | 958 | # the luminance component of the colors in the HTML output. Values below |
| rgrover1 | 981:07ce7d9ed5ff | 959 | # 100 gradually make the output lighter, whereas values above 100 make |
| rgrover1 | 981:07ce7d9ed5ff | 960 | # the output darker. The value divided by 100 is the actual gamma applied, |
| rgrover1 | 981:07ce7d9ed5ff | 961 | # so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, |
| rgrover1 | 981:07ce7d9ed5ff | 962 | # and 100 does not change the gamma. |
| rgrover1 | 981:07ce7d9ed5ff | 963 | |
| rgrover1 | 981:07ce7d9ed5ff | 964 | HTML_COLORSTYLE_GAMMA = 80 |
| rgrover1 | 981:07ce7d9ed5ff | 965 | |
| rgrover1 | 981:07ce7d9ed5ff | 966 | # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML |
| rgrover1 | 981:07ce7d9ed5ff | 967 | # page will contain the date and time when the page was generated. Setting |
| rgrover1 | 981:07ce7d9ed5ff | 968 | # this to NO can help when comparing the output of multiple runs. |
| rgrover1 | 981:07ce7d9ed5ff | 969 | |
| rgrover1 | 981:07ce7d9ed5ff | 970 | HTML_TIMESTAMP = YES |
| rgrover1 | 981:07ce7d9ed5ff | 971 | |
| rgrover1 | 981:07ce7d9ed5ff | 972 | # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML |
| rgrover1 | 981:07ce7d9ed5ff | 973 | # documentation will contain sections that can be hidden and shown after the |
| rgrover1 | 981:07ce7d9ed5ff | 974 | # page has loaded. |
| rgrover1 | 981:07ce7d9ed5ff | 975 | |
| rgrover1 | 981:07ce7d9ed5ff | 976 | HTML_DYNAMIC_SECTIONS = NO |
| rgrover1 | 981:07ce7d9ed5ff | 977 | |
| rgrover1 | 981:07ce7d9ed5ff | 978 | # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of |
| rgrover1 | 981:07ce7d9ed5ff | 979 | # entries shown in the various tree structured indices initially; the user |
| rgrover1 | 981:07ce7d9ed5ff | 980 | # can expand and collapse entries dynamically later on. Doxygen will expand |
| rgrover1 | 981:07ce7d9ed5ff | 981 | # the tree to such a level that at most the specified number of entries are |
| rgrover1 | 981:07ce7d9ed5ff | 982 | # visible (unless a fully collapsed tree already exceeds this amount). |
| rgrover1 | 981:07ce7d9ed5ff | 983 | # So setting the number of entries 1 will produce a full collapsed tree by |
| rgrover1 | 981:07ce7d9ed5ff | 984 | # default. 0 is a special value representing an infinite number of entries |
| rgrover1 | 981:07ce7d9ed5ff | 985 | # and will result in a full expanded tree by default. |
| rgrover1 | 981:07ce7d9ed5ff | 986 | |
| rgrover1 | 981:07ce7d9ed5ff | 987 | HTML_INDEX_NUM_ENTRIES = 100 |
| rgrover1 | 981:07ce7d9ed5ff | 988 | |
| rgrover1 | 981:07ce7d9ed5ff | 989 | # If the GENERATE_DOCSET tag is set to YES, additional index files |
| rgrover1 | 981:07ce7d9ed5ff | 990 | # will be generated that can be used as input for Apple's Xcode 3 |
| rgrover1 | 981:07ce7d9ed5ff | 991 | # integrated development environment, introduced with OSX 10.5 (Leopard). |
| rgrover1 | 981:07ce7d9ed5ff | 992 | # To create a documentation set, doxygen will generate a Makefile in the |
| rgrover1 | 981:07ce7d9ed5ff | 993 | # HTML output directory. Running make will produce the docset in that |
| rgrover1 | 981:07ce7d9ed5ff | 994 | # directory and running "make install" will install the docset in |
| rgrover1 | 981:07ce7d9ed5ff | 995 | # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find |
| rgrover1 | 981:07ce7d9ed5ff | 996 | # it at startup. |
| rgrover1 | 981:07ce7d9ed5ff | 997 | # See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html |
| rgrover1 | 981:07ce7d9ed5ff | 998 | # for more information. |
| rgrover1 | 981:07ce7d9ed5ff | 999 | |
| rgrover1 | 981:07ce7d9ed5ff | 1000 | GENERATE_DOCSET = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1001 | |
| rgrover1 | 981:07ce7d9ed5ff | 1002 | # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the |
| rgrover1 | 981:07ce7d9ed5ff | 1003 | # feed. A documentation feed provides an umbrella under which multiple |
| rgrover1 | 981:07ce7d9ed5ff | 1004 | # documentation sets from a single provider (such as a company or product suite) |
| rgrover1 | 981:07ce7d9ed5ff | 1005 | # can be grouped. |
| rgrover1 | 981:07ce7d9ed5ff | 1006 | |
| rgrover1 | 981:07ce7d9ed5ff | 1007 | DOCSET_FEEDNAME = "Doxygen generated docs" |
| rgrover1 | 981:07ce7d9ed5ff | 1008 | |
| rgrover1 | 981:07ce7d9ed5ff | 1009 | # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that |
| rgrover1 | 981:07ce7d9ed5ff | 1010 | # should uniquely identify the documentation set bundle. This should be a |
| rgrover1 | 981:07ce7d9ed5ff | 1011 | # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen |
| rgrover1 | 981:07ce7d9ed5ff | 1012 | # will append .docset to the name. |
| rgrover1 | 981:07ce7d9ed5ff | 1013 | |
| rgrover1 | 981:07ce7d9ed5ff | 1014 | DOCSET_BUNDLE_ID = org.doxygen.Project |
| rgrover1 | 981:07ce7d9ed5ff | 1015 | |
| rgrover1 | 981:07ce7d9ed5ff | 1016 | # When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely |
| rgrover1 | 981:07ce7d9ed5ff | 1017 | # identify the documentation publisher. This should be a reverse domain-name |
| rgrover1 | 981:07ce7d9ed5ff | 1018 | # style string, e.g. com.mycompany.MyDocSet.documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 1019 | |
| rgrover1 | 981:07ce7d9ed5ff | 1020 | DOCSET_PUBLISHER_ID = org.doxygen.Publisher |
| rgrover1 | 981:07ce7d9ed5ff | 1021 | |
| rgrover1 | 981:07ce7d9ed5ff | 1022 | # The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. |
| rgrover1 | 981:07ce7d9ed5ff | 1023 | |
| rgrover1 | 981:07ce7d9ed5ff | 1024 | DOCSET_PUBLISHER_NAME = Publisher |
| rgrover1 | 981:07ce7d9ed5ff | 1025 | |
| rgrover1 | 981:07ce7d9ed5ff | 1026 | # If the GENERATE_HTMLHELP tag is set to YES, additional index files |
| rgrover1 | 981:07ce7d9ed5ff | 1027 | # will be generated that can be used as input for tools like the |
| rgrover1 | 981:07ce7d9ed5ff | 1028 | # Microsoft HTML help workshop to generate a compiled HTML help file (.chm) |
| rgrover1 | 981:07ce7d9ed5ff | 1029 | # of the generated HTML documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 1030 | |
| rgrover1 | 981:07ce7d9ed5ff | 1031 | GENERATE_HTMLHELP = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1032 | |
| rgrover1 | 981:07ce7d9ed5ff | 1033 | # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can |
| rgrover1 | 981:07ce7d9ed5ff | 1034 | # be used to specify the file name of the resulting .chm file. You |
| rgrover1 | 981:07ce7d9ed5ff | 1035 | # can add a path in front of the file if the result should not be |
| rgrover1 | 981:07ce7d9ed5ff | 1036 | # written to the html output directory. |
| rgrover1 | 981:07ce7d9ed5ff | 1037 | |
| rgrover1 | 981:07ce7d9ed5ff | 1038 | CHM_FILE = |
| rgrover1 | 981:07ce7d9ed5ff | 1039 | |
| rgrover1 | 981:07ce7d9ed5ff | 1040 | # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can |
| rgrover1 | 981:07ce7d9ed5ff | 1041 | # be used to specify the location (absolute path including file name) of |
| rgrover1 | 981:07ce7d9ed5ff | 1042 | # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run |
| rgrover1 | 981:07ce7d9ed5ff | 1043 | # the HTML help compiler on the generated index.hhp. |
| rgrover1 | 981:07ce7d9ed5ff | 1044 | |
| rgrover1 | 981:07ce7d9ed5ff | 1045 | HHC_LOCATION = |
| rgrover1 | 981:07ce7d9ed5ff | 1046 | |
| rgrover1 | 981:07ce7d9ed5ff | 1047 | # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag |
| rgrover1 | 981:07ce7d9ed5ff | 1048 | # controls if a separate .chi index file is generated (YES) or that |
| rgrover1 | 981:07ce7d9ed5ff | 1049 | # it should be included in the master .chm file (NO). |
| rgrover1 | 981:07ce7d9ed5ff | 1050 | |
| rgrover1 | 981:07ce7d9ed5ff | 1051 | GENERATE_CHI = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1052 | |
| rgrover1 | 981:07ce7d9ed5ff | 1053 | # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING |
| rgrover1 | 981:07ce7d9ed5ff | 1054 | # is used to encode HtmlHelp index (hhk), content (hhc) and project file |
| rgrover1 | 981:07ce7d9ed5ff | 1055 | # content. |
| rgrover1 | 981:07ce7d9ed5ff | 1056 | |
| rgrover1 | 981:07ce7d9ed5ff | 1057 | CHM_INDEX_ENCODING = |
| rgrover1 | 981:07ce7d9ed5ff | 1058 | |
| rgrover1 | 981:07ce7d9ed5ff | 1059 | # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag |
| rgrover1 | 981:07ce7d9ed5ff | 1060 | # controls whether a binary table of contents is generated (YES) or a |
| rgrover1 | 981:07ce7d9ed5ff | 1061 | # normal table of contents (NO) in the .chm file. |
| rgrover1 | 981:07ce7d9ed5ff | 1062 | |
| rgrover1 | 981:07ce7d9ed5ff | 1063 | BINARY_TOC = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1064 | |
| rgrover1 | 981:07ce7d9ed5ff | 1065 | # The TOC_EXPAND flag can be set to YES to add extra items for group members |
| rgrover1 | 981:07ce7d9ed5ff | 1066 | # to the contents of the HTML help documentation and to the tree view. |
| rgrover1 | 981:07ce7d9ed5ff | 1067 | |
| rgrover1 | 981:07ce7d9ed5ff | 1068 | TOC_EXPAND = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1069 | |
| rgrover1 | 981:07ce7d9ed5ff | 1070 | # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and |
| rgrover1 | 981:07ce7d9ed5ff | 1071 | # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated |
| rgrover1 | 981:07ce7d9ed5ff | 1072 | # that can be used as input for Qt's qhelpgenerator to generate a |
| rgrover1 | 981:07ce7d9ed5ff | 1073 | # Qt Compressed Help (.qch) of the generated HTML documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 1074 | |
| rgrover1 | 981:07ce7d9ed5ff | 1075 | GENERATE_QHP = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1076 | |
| rgrover1 | 981:07ce7d9ed5ff | 1077 | # If the QHG_LOCATION tag is specified, the QCH_FILE tag can |
| rgrover1 | 981:07ce7d9ed5ff | 1078 | # be used to specify the file name of the resulting .qch file. |
| rgrover1 | 981:07ce7d9ed5ff | 1079 | # The path specified is relative to the HTML output folder. |
| rgrover1 | 981:07ce7d9ed5ff | 1080 | |
| rgrover1 | 981:07ce7d9ed5ff | 1081 | QCH_FILE = |
| rgrover1 | 981:07ce7d9ed5ff | 1082 | |
| rgrover1 | 981:07ce7d9ed5ff | 1083 | # The QHP_NAMESPACE tag specifies the namespace to use when generating |
| rgrover1 | 981:07ce7d9ed5ff | 1084 | # Qt Help Project output. For more information please see |
| rgrover1 | 981:07ce7d9ed5ff | 1085 | # http://doc.trolltech.com/qthelpproject.html#namespace |
| rgrover1 | 981:07ce7d9ed5ff | 1086 | |
| rgrover1 | 981:07ce7d9ed5ff | 1087 | QHP_NAMESPACE = org.doxygen.Project |
| rgrover1 | 981:07ce7d9ed5ff | 1088 | |
| rgrover1 | 981:07ce7d9ed5ff | 1089 | # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating |
| rgrover1 | 981:07ce7d9ed5ff | 1090 | # Qt Help Project output. For more information please see |
| rgrover1 | 981:07ce7d9ed5ff | 1091 | # http://doc.trolltech.com/qthelpproject.html#virtual-folders |
| rgrover1 | 981:07ce7d9ed5ff | 1092 | |
| rgrover1 | 981:07ce7d9ed5ff | 1093 | QHP_VIRTUAL_FOLDER = doc |
| rgrover1 | 981:07ce7d9ed5ff | 1094 | |
| rgrover1 | 981:07ce7d9ed5ff | 1095 | # If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to |
| rgrover1 | 981:07ce7d9ed5ff | 1096 | # add. For more information please see |
| rgrover1 | 981:07ce7d9ed5ff | 1097 | # http://doc.trolltech.com/qthelpproject.html#custom-filters |
| rgrover1 | 981:07ce7d9ed5ff | 1098 | |
| rgrover1 | 981:07ce7d9ed5ff | 1099 | QHP_CUST_FILTER_NAME = |
| rgrover1 | 981:07ce7d9ed5ff | 1100 | |
| rgrover1 | 981:07ce7d9ed5ff | 1101 | # The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the |
| rgrover1 | 981:07ce7d9ed5ff | 1102 | # custom filter to add. For more information please see |
| rgrover1 | 981:07ce7d9ed5ff | 1103 | # <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters"> |
| rgrover1 | 981:07ce7d9ed5ff | 1104 | # Qt Help Project / Custom Filters</a>. |
| rgrover1 | 981:07ce7d9ed5ff | 1105 | |
| rgrover1 | 981:07ce7d9ed5ff | 1106 | QHP_CUST_FILTER_ATTRS = |
| rgrover1 | 981:07ce7d9ed5ff | 1107 | |
| rgrover1 | 981:07ce7d9ed5ff | 1108 | # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this |
| rgrover1 | 981:07ce7d9ed5ff | 1109 | # project's |
| rgrover1 | 981:07ce7d9ed5ff | 1110 | # filter section matches. |
| rgrover1 | 981:07ce7d9ed5ff | 1111 | # <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes"> |
| rgrover1 | 981:07ce7d9ed5ff | 1112 | # Qt Help Project / Filter Attributes</a>. |
| rgrover1 | 981:07ce7d9ed5ff | 1113 | |
| rgrover1 | 981:07ce7d9ed5ff | 1114 | QHP_SECT_FILTER_ATTRS = |
| rgrover1 | 981:07ce7d9ed5ff | 1115 | |
| rgrover1 | 981:07ce7d9ed5ff | 1116 | # If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can |
| rgrover1 | 981:07ce7d9ed5ff | 1117 | # be used to specify the location of Qt's qhelpgenerator. |
| rgrover1 | 981:07ce7d9ed5ff | 1118 | # If non-empty doxygen will try to run qhelpgenerator on the generated |
| rgrover1 | 981:07ce7d9ed5ff | 1119 | # .qhp file. |
| rgrover1 | 981:07ce7d9ed5ff | 1120 | |
| rgrover1 | 981:07ce7d9ed5ff | 1121 | QHG_LOCATION = |
| rgrover1 | 981:07ce7d9ed5ff | 1122 | |
| rgrover1 | 981:07ce7d9ed5ff | 1123 | # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files |
| rgrover1 | 981:07ce7d9ed5ff | 1124 | # will be generated, which together with the HTML files, form an Eclipse help |
| rgrover1 | 981:07ce7d9ed5ff | 1125 | # plugin. To install this plugin and make it available under the help contents |
| rgrover1 | 981:07ce7d9ed5ff | 1126 | # menu in Eclipse, the contents of the directory containing the HTML and XML |
| rgrover1 | 981:07ce7d9ed5ff | 1127 | # files needs to be copied into the plugins directory of eclipse. The name of |
| rgrover1 | 981:07ce7d9ed5ff | 1128 | # the directory within the plugins directory should be the same as |
| rgrover1 | 981:07ce7d9ed5ff | 1129 | # the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before |
| rgrover1 | 981:07ce7d9ed5ff | 1130 | # the help appears. |
| rgrover1 | 981:07ce7d9ed5ff | 1131 | |
| rgrover1 | 981:07ce7d9ed5ff | 1132 | GENERATE_ECLIPSEHELP = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1133 | |
| rgrover1 | 981:07ce7d9ed5ff | 1134 | # A unique identifier for the eclipse help plugin. When installing the plugin |
| rgrover1 | 981:07ce7d9ed5ff | 1135 | # the directory name containing the HTML and XML files should also have |
| rgrover1 | 981:07ce7d9ed5ff | 1136 | # this name. |
| rgrover1 | 981:07ce7d9ed5ff | 1137 | |
| rgrover1 | 981:07ce7d9ed5ff | 1138 | ECLIPSE_DOC_ID = org.doxygen.Project |
| rgrover1 | 981:07ce7d9ed5ff | 1139 | |
| rgrover1 | 981:07ce7d9ed5ff | 1140 | # The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) |
| rgrover1 | 981:07ce7d9ed5ff | 1141 | # at top of each HTML page. The value NO (the default) enables the index and |
| rgrover1 | 981:07ce7d9ed5ff | 1142 | # the value YES disables it. Since the tabs have the same information as the |
| rgrover1 | 981:07ce7d9ed5ff | 1143 | # navigation tree you can set this option to NO if you already set |
| rgrover1 | 981:07ce7d9ed5ff | 1144 | # GENERATE_TREEVIEW to YES. |
| rgrover1 | 981:07ce7d9ed5ff | 1145 | |
| rgrover1 | 981:07ce7d9ed5ff | 1146 | DISABLE_INDEX = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1147 | |
| rgrover1 | 981:07ce7d9ed5ff | 1148 | # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index |
| rgrover1 | 981:07ce7d9ed5ff | 1149 | # structure should be generated to display hierarchical information. |
| rgrover1 | 981:07ce7d9ed5ff | 1150 | # If the tag value is set to YES, a side panel will be generated |
| rgrover1 | 981:07ce7d9ed5ff | 1151 | # containing a tree-like index structure (just like the one that |
| rgrover1 | 981:07ce7d9ed5ff | 1152 | # is generated for HTML Help). For this to work a browser that supports |
| rgrover1 | 981:07ce7d9ed5ff | 1153 | # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). |
| rgrover1 | 981:07ce7d9ed5ff | 1154 | # Windows users are probably better off using the HTML help feature. |
| rgrover1 | 981:07ce7d9ed5ff | 1155 | # Since the tree basically has the same information as the tab index you |
| rgrover1 | 981:07ce7d9ed5ff | 1156 | # could consider to set DISABLE_INDEX to NO when enabling this option. |
| rgrover1 | 981:07ce7d9ed5ff | 1157 | |
| rgrover1 | 981:07ce7d9ed5ff | 1158 | GENERATE_TREEVIEW = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1159 | |
| rgrover1 | 981:07ce7d9ed5ff | 1160 | # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values |
| rgrover1 | 981:07ce7d9ed5ff | 1161 | # (range [0,1..20]) that doxygen will group on one line in the generated HTML |
| rgrover1 | 981:07ce7d9ed5ff | 1162 | # documentation. Note that a value of 0 will completely suppress the enum |
| rgrover1 | 981:07ce7d9ed5ff | 1163 | # values from appearing in the overview section. |
| rgrover1 | 981:07ce7d9ed5ff | 1164 | |
| rgrover1 | 981:07ce7d9ed5ff | 1165 | ENUM_VALUES_PER_LINE = 4 |
| rgrover1 | 981:07ce7d9ed5ff | 1166 | |
| rgrover1 | 981:07ce7d9ed5ff | 1167 | # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be |
| rgrover1 | 981:07ce7d9ed5ff | 1168 | # used to set the initial width (in pixels) of the frame in which the tree |
| rgrover1 | 981:07ce7d9ed5ff | 1169 | # is shown. |
| rgrover1 | 981:07ce7d9ed5ff | 1170 | |
| rgrover1 | 981:07ce7d9ed5ff | 1171 | TREEVIEW_WIDTH = 250 |
| rgrover1 | 981:07ce7d9ed5ff | 1172 | |
| rgrover1 | 981:07ce7d9ed5ff | 1173 | # When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open |
| rgrover1 | 981:07ce7d9ed5ff | 1174 | # links to external symbols imported via tag files in a separate window. |
| rgrover1 | 981:07ce7d9ed5ff | 1175 | |
| rgrover1 | 981:07ce7d9ed5ff | 1176 | EXT_LINKS_IN_WINDOW = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1177 | |
| rgrover1 | 981:07ce7d9ed5ff | 1178 | # Use this tag to change the font size of Latex formulas included |
| rgrover1 | 981:07ce7d9ed5ff | 1179 | # as images in the HTML documentation. The default is 10. Note that |
| rgrover1 | 981:07ce7d9ed5ff | 1180 | # when you change the font size after a successful doxygen run you need |
| rgrover1 | 981:07ce7d9ed5ff | 1181 | # to manually remove any form_*.png images from the HTML output directory |
| rgrover1 | 981:07ce7d9ed5ff | 1182 | # to force them to be regenerated. |
| rgrover1 | 981:07ce7d9ed5ff | 1183 | |
| rgrover1 | 981:07ce7d9ed5ff | 1184 | FORMULA_FONTSIZE = 10 |
| rgrover1 | 981:07ce7d9ed5ff | 1185 | |
| rgrover1 | 981:07ce7d9ed5ff | 1186 | # Use the FORMULA_TRANPARENT tag to determine whether or not the images |
| rgrover1 | 981:07ce7d9ed5ff | 1187 | # generated for formulas are transparent PNGs. Transparent PNGs are |
| rgrover1 | 981:07ce7d9ed5ff | 1188 | # not supported properly for IE 6.0, but are supported on all modern browsers. |
| rgrover1 | 981:07ce7d9ed5ff | 1189 | # Note that when changing this option you need to delete any form_*.png files |
| rgrover1 | 981:07ce7d9ed5ff | 1190 | # in the HTML output before the changes have effect. |
| rgrover1 | 981:07ce7d9ed5ff | 1191 | |
| rgrover1 | 981:07ce7d9ed5ff | 1192 | FORMULA_TRANSPARENT = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1193 | |
| rgrover1 | 981:07ce7d9ed5ff | 1194 | # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax |
| rgrover1 | 981:07ce7d9ed5ff | 1195 | # (see http://www.mathjax.org) which uses client side Javascript for the |
| rgrover1 | 981:07ce7d9ed5ff | 1196 | # rendering instead of using prerendered bitmaps. Use this if you do not |
| rgrover1 | 981:07ce7d9ed5ff | 1197 | # have LaTeX installed or if you want to formulas look prettier in the HTML |
| rgrover1 | 981:07ce7d9ed5ff | 1198 | # output. When enabled you may also need to install MathJax separately and |
| rgrover1 | 981:07ce7d9ed5ff | 1199 | # configure the path to it using the MATHJAX_RELPATH option. |
| rgrover1 | 981:07ce7d9ed5ff | 1200 | |
| rgrover1 | 981:07ce7d9ed5ff | 1201 | USE_MATHJAX = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1202 | |
| rgrover1 | 981:07ce7d9ed5ff | 1203 | # When MathJax is enabled you can set the default output format to be used for |
| rgrover1 | 981:07ce7d9ed5ff | 1204 | # the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and |
| rgrover1 | 981:07ce7d9ed5ff | 1205 | # SVG. The default value is HTML-CSS, which is slower, but has the best |
| rgrover1 | 981:07ce7d9ed5ff | 1206 | # compatibility. |
| rgrover1 | 981:07ce7d9ed5ff | 1207 | |
| rgrover1 | 981:07ce7d9ed5ff | 1208 | MATHJAX_FORMAT = HTML-CSS |
| rgrover1 | 981:07ce7d9ed5ff | 1209 | |
| rgrover1 | 981:07ce7d9ed5ff | 1210 | # When MathJax is enabled you need to specify the location relative to the |
| rgrover1 | 981:07ce7d9ed5ff | 1211 | # HTML output directory using the MATHJAX_RELPATH option. The destination |
| rgrover1 | 981:07ce7d9ed5ff | 1212 | # directory should contain the MathJax.js script. For instance, if the mathjax |
| rgrover1 | 981:07ce7d9ed5ff | 1213 | # directory is located at the same level as the HTML output directory, then |
| rgrover1 | 981:07ce7d9ed5ff | 1214 | # MATHJAX_RELPATH should be ../mathjax. The default value points to |
| rgrover1 | 981:07ce7d9ed5ff | 1215 | # the MathJax Content Delivery Network so you can quickly see the result without |
| rgrover1 | 981:07ce7d9ed5ff | 1216 | # installing MathJax. |
| rgrover1 | 981:07ce7d9ed5ff | 1217 | # However, it is strongly recommended to install a local |
| rgrover1 | 981:07ce7d9ed5ff | 1218 | # copy of MathJax from http://www.mathjax.org before deployment. |
| rgrover1 | 981:07ce7d9ed5ff | 1219 | |
| rgrover1 | 981:07ce7d9ed5ff | 1220 | MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest |
| rgrover1 | 981:07ce7d9ed5ff | 1221 | |
| rgrover1 | 981:07ce7d9ed5ff | 1222 | # The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension |
| rgrover1 | 981:07ce7d9ed5ff | 1223 | # names that should be enabled during MathJax rendering. |
| rgrover1 | 981:07ce7d9ed5ff | 1224 | |
| rgrover1 | 981:07ce7d9ed5ff | 1225 | MATHJAX_EXTENSIONS = |
| rgrover1 | 981:07ce7d9ed5ff | 1226 | |
| rgrover1 | 981:07ce7d9ed5ff | 1227 | # The MATHJAX_CODEFILE tag can be used to specify a file with javascript |
| rgrover1 | 981:07ce7d9ed5ff | 1228 | # pieces of code that will be used on startup of the MathJax code. |
| rgrover1 | 981:07ce7d9ed5ff | 1229 | |
| rgrover1 | 981:07ce7d9ed5ff | 1230 | MATHJAX_CODEFILE = |
| rgrover1 | 981:07ce7d9ed5ff | 1231 | |
| rgrover1 | 981:07ce7d9ed5ff | 1232 | # When the SEARCHENGINE tag is enabled doxygen will generate a search box |
| rgrover1 | 981:07ce7d9ed5ff | 1233 | # for the HTML output. The underlying search engine uses javascript |
| rgrover1 | 981:07ce7d9ed5ff | 1234 | # and DHTML and should work on any modern browser. Note that when using |
| rgrover1 | 981:07ce7d9ed5ff | 1235 | # HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets |
| rgrover1 | 981:07ce7d9ed5ff | 1236 | # (GENERATE_DOCSET) there is already a search function so this one should |
| rgrover1 | 981:07ce7d9ed5ff | 1237 | # typically be disabled. For large projects the javascript based search engine |
| rgrover1 | 981:07ce7d9ed5ff | 1238 | # can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. |
| rgrover1 | 981:07ce7d9ed5ff | 1239 | |
| rgrover1 | 981:07ce7d9ed5ff | 1240 | SEARCHENGINE = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1241 | |
| rgrover1 | 981:07ce7d9ed5ff | 1242 | # When the SERVER_BASED_SEARCH tag is enabled the search engine will be |
| rgrover1 | 981:07ce7d9ed5ff | 1243 | # implemented using a web server instead of a web client using Javascript. |
| rgrover1 | 981:07ce7d9ed5ff | 1244 | # There are two flavours of web server based search depending on the |
| rgrover1 | 981:07ce7d9ed5ff | 1245 | # EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for |
| rgrover1 | 981:07ce7d9ed5ff | 1246 | # searching and an index file used by the script. When EXTERNAL_SEARCH is |
| rgrover1 | 981:07ce7d9ed5ff | 1247 | # enabled the indexing and searching needs to be provided by external tools. |
| rgrover1 | 981:07ce7d9ed5ff | 1248 | # See the manual for details. |
| rgrover1 | 981:07ce7d9ed5ff | 1249 | |
| rgrover1 | 981:07ce7d9ed5ff | 1250 | SERVER_BASED_SEARCH = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1251 | |
| rgrover1 | 981:07ce7d9ed5ff | 1252 | # When EXTERNAL_SEARCH is enabled doxygen will no longer generate the PHP |
| rgrover1 | 981:07ce7d9ed5ff | 1253 | # script for searching. Instead the search results are written to an XML file |
| rgrover1 | 981:07ce7d9ed5ff | 1254 | # which needs to be processed by an external indexer. Doxygen will invoke an |
| rgrover1 | 981:07ce7d9ed5ff | 1255 | # external search engine pointed to by the SEARCHENGINE_URL option to obtain |
| rgrover1 | 981:07ce7d9ed5ff | 1256 | # the search results. Doxygen ships with an example indexer (doxyindexer) and |
| rgrover1 | 981:07ce7d9ed5ff | 1257 | # search engine (doxysearch.cgi) which are based on the open source search |
| rgrover1 | 981:07ce7d9ed5ff | 1258 | # engine library Xapian. See the manual for configuration details. |
| rgrover1 | 981:07ce7d9ed5ff | 1259 | |
| rgrover1 | 981:07ce7d9ed5ff | 1260 | EXTERNAL_SEARCH = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1261 | |
| rgrover1 | 981:07ce7d9ed5ff | 1262 | # The SEARCHENGINE_URL should point to a search engine hosted by a web server |
| rgrover1 | 981:07ce7d9ed5ff | 1263 | # which will returned the search results when EXTERNAL_SEARCH is enabled. |
| rgrover1 | 981:07ce7d9ed5ff | 1264 | # Doxygen ships with an example search engine (doxysearch) which is based on |
| rgrover1 | 981:07ce7d9ed5ff | 1265 | # the open source search engine library Xapian. See the manual for configuration |
| rgrover1 | 981:07ce7d9ed5ff | 1266 | # details. |
| rgrover1 | 981:07ce7d9ed5ff | 1267 | |
| rgrover1 | 981:07ce7d9ed5ff | 1268 | SEARCHENGINE_URL = |
| rgrover1 | 981:07ce7d9ed5ff | 1269 | |
| rgrover1 | 981:07ce7d9ed5ff | 1270 | # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed |
| rgrover1 | 981:07ce7d9ed5ff | 1271 | # search data is written to a file for indexing by an external tool. With the |
| rgrover1 | 981:07ce7d9ed5ff | 1272 | # SEARCHDATA_FILE tag the name of this file can be specified. |
| rgrover1 | 981:07ce7d9ed5ff | 1273 | |
| rgrover1 | 981:07ce7d9ed5ff | 1274 | SEARCHDATA_FILE = searchdata.xml |
| rgrover1 | 981:07ce7d9ed5ff | 1275 | |
| rgrover1 | 981:07ce7d9ed5ff | 1276 | # When SERVER_BASED_SEARCH AND EXTERNAL_SEARCH are both enabled the |
| rgrover1 | 981:07ce7d9ed5ff | 1277 | # EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is |
| rgrover1 | 981:07ce7d9ed5ff | 1278 | # useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple |
| rgrover1 | 981:07ce7d9ed5ff | 1279 | # projects and redirect the results back to the right project. |
| rgrover1 | 981:07ce7d9ed5ff | 1280 | |
| rgrover1 | 981:07ce7d9ed5ff | 1281 | EXTERNAL_SEARCH_ID = |
| rgrover1 | 981:07ce7d9ed5ff | 1282 | |
| rgrover1 | 981:07ce7d9ed5ff | 1283 | # The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen |
| rgrover1 | 981:07ce7d9ed5ff | 1284 | # projects other than the one defined by this configuration file, but that are |
| rgrover1 | 981:07ce7d9ed5ff | 1285 | # all added to the same external search index. Each project needs to have a |
| rgrover1 | 981:07ce7d9ed5ff | 1286 | # unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id |
| rgrover1 | 981:07ce7d9ed5ff | 1287 | # of to a relative location where the documentation can be found. |
| rgrover1 | 981:07ce7d9ed5ff | 1288 | # The format is: EXTRA_SEARCH_MAPPINGS = id1=loc1 id2=loc2 ... |
| rgrover1 | 981:07ce7d9ed5ff | 1289 | |
| rgrover1 | 981:07ce7d9ed5ff | 1290 | EXTRA_SEARCH_MAPPINGS = |
| rgrover1 | 981:07ce7d9ed5ff | 1291 | |
| rgrover1 | 981:07ce7d9ed5ff | 1292 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1293 | # configuration options related to the LaTeX output |
| rgrover1 | 981:07ce7d9ed5ff | 1294 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1295 | |
| rgrover1 | 981:07ce7d9ed5ff | 1296 | # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will |
| rgrover1 | 981:07ce7d9ed5ff | 1297 | # generate Latex output. |
| rgrover1 | 981:07ce7d9ed5ff | 1298 | |
| rgrover1 | 981:07ce7d9ed5ff | 1299 | GENERATE_LATEX = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1300 | |
| rgrover1 | 981:07ce7d9ed5ff | 1301 | # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. |
| rgrover1 | 981:07ce7d9ed5ff | 1302 | # If a relative path is entered the value of OUTPUT_DIRECTORY will be |
| rgrover1 | 981:07ce7d9ed5ff | 1303 | # put in front of it. If left blank `latex' will be used as the default path. |
| rgrover1 | 981:07ce7d9ed5ff | 1304 | |
| rgrover1 | 981:07ce7d9ed5ff | 1305 | LATEX_OUTPUT = latex |
| rgrover1 | 981:07ce7d9ed5ff | 1306 | |
| rgrover1 | 981:07ce7d9ed5ff | 1307 | # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be |
| rgrover1 | 981:07ce7d9ed5ff | 1308 | # invoked. If left blank `latex' will be used as the default command name. |
| rgrover1 | 981:07ce7d9ed5ff | 1309 | # Note that when enabling USE_PDFLATEX this option is only used for |
| rgrover1 | 981:07ce7d9ed5ff | 1310 | # generating bitmaps for formulas in the HTML output, but not in the |
| rgrover1 | 981:07ce7d9ed5ff | 1311 | # Makefile that is written to the output directory. |
| rgrover1 | 981:07ce7d9ed5ff | 1312 | |
| rgrover1 | 981:07ce7d9ed5ff | 1313 | LATEX_CMD_NAME = latex |
| rgrover1 | 981:07ce7d9ed5ff | 1314 | |
| rgrover1 | 981:07ce7d9ed5ff | 1315 | # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to |
| rgrover1 | 981:07ce7d9ed5ff | 1316 | # generate index for LaTeX. If left blank `makeindex' will be used as the |
| rgrover1 | 981:07ce7d9ed5ff | 1317 | # default command name. |
| rgrover1 | 981:07ce7d9ed5ff | 1318 | |
| rgrover1 | 981:07ce7d9ed5ff | 1319 | MAKEINDEX_CMD_NAME = makeindex |
| rgrover1 | 981:07ce7d9ed5ff | 1320 | |
| rgrover1 | 981:07ce7d9ed5ff | 1321 | # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact |
| rgrover1 | 981:07ce7d9ed5ff | 1322 | # LaTeX documents. This may be useful for small projects and may help to |
| rgrover1 | 981:07ce7d9ed5ff | 1323 | # save some trees in general. |
| rgrover1 | 981:07ce7d9ed5ff | 1324 | |
| rgrover1 | 981:07ce7d9ed5ff | 1325 | COMPACT_LATEX = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1326 | |
| rgrover1 | 981:07ce7d9ed5ff | 1327 | # The PAPER_TYPE tag can be used to set the paper type that is used |
| rgrover1 | 981:07ce7d9ed5ff | 1328 | # by the printer. Possible values are: a4, letter, legal and |
| rgrover1 | 981:07ce7d9ed5ff | 1329 | # executive. If left blank a4 will be used. |
| rgrover1 | 981:07ce7d9ed5ff | 1330 | |
| rgrover1 | 981:07ce7d9ed5ff | 1331 | PAPER_TYPE = a4wide |
| rgrover1 | 981:07ce7d9ed5ff | 1332 | |
| rgrover1 | 981:07ce7d9ed5ff | 1333 | # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX |
| rgrover1 | 981:07ce7d9ed5ff | 1334 | # packages that should be included in the LaTeX output. |
| rgrover1 | 981:07ce7d9ed5ff | 1335 | |
| rgrover1 | 981:07ce7d9ed5ff | 1336 | EXTRA_PACKAGES = |
| rgrover1 | 981:07ce7d9ed5ff | 1337 | |
| rgrover1 | 981:07ce7d9ed5ff | 1338 | # The LATEX_HEADER tag can be used to specify a personal LaTeX header for |
| rgrover1 | 981:07ce7d9ed5ff | 1339 | # the generated latex document. The header should contain everything until |
| rgrover1 | 981:07ce7d9ed5ff | 1340 | # the first chapter. If it is left blank doxygen will generate a |
| rgrover1 | 981:07ce7d9ed5ff | 1341 | # standard header. Notice: only use this tag if you know what you are doing! |
| rgrover1 | 981:07ce7d9ed5ff | 1342 | |
| rgrover1 | 981:07ce7d9ed5ff | 1343 | LATEX_HEADER = |
| rgrover1 | 981:07ce7d9ed5ff | 1344 | |
| rgrover1 | 981:07ce7d9ed5ff | 1345 | # The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for |
| rgrover1 | 981:07ce7d9ed5ff | 1346 | # the generated latex document. The footer should contain everything after |
| rgrover1 | 981:07ce7d9ed5ff | 1347 | # the last chapter. If it is left blank doxygen will generate a |
| rgrover1 | 981:07ce7d9ed5ff | 1348 | # standard footer. Notice: only use this tag if you know what you are doing! |
| rgrover1 | 981:07ce7d9ed5ff | 1349 | |
| rgrover1 | 981:07ce7d9ed5ff | 1350 | LATEX_FOOTER = |
| rgrover1 | 981:07ce7d9ed5ff | 1351 | |
| rgrover1 | 981:07ce7d9ed5ff | 1352 | # The LATEX_EXTRA_FILES tag can be used to specify one or more extra images |
| rgrover1 | 981:07ce7d9ed5ff | 1353 | # or other source files which should be copied to the LaTeX output directory. |
| rgrover1 | 981:07ce7d9ed5ff | 1354 | # Note that the files will be copied as-is; there are no commands or markers |
| rgrover1 | 981:07ce7d9ed5ff | 1355 | # available. |
| rgrover1 | 981:07ce7d9ed5ff | 1356 | |
| rgrover1 | 981:07ce7d9ed5ff | 1357 | LATEX_EXTRA_FILES = |
| rgrover1 | 981:07ce7d9ed5ff | 1358 | |
| rgrover1 | 981:07ce7d9ed5ff | 1359 | # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated |
| rgrover1 | 981:07ce7d9ed5ff | 1360 | # is prepared for conversion to pdf (using ps2pdf). The pdf file will |
| rgrover1 | 981:07ce7d9ed5ff | 1361 | # contain links (just like the HTML output) instead of page references |
| rgrover1 | 981:07ce7d9ed5ff | 1362 | # This makes the output suitable for online browsing using a pdf viewer. |
| rgrover1 | 981:07ce7d9ed5ff | 1363 | |
| rgrover1 | 981:07ce7d9ed5ff | 1364 | PDF_HYPERLINKS = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1365 | |
| rgrover1 | 981:07ce7d9ed5ff | 1366 | # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of |
| rgrover1 | 981:07ce7d9ed5ff | 1367 | # plain latex in the generated Makefile. Set this option to YES to get a |
| rgrover1 | 981:07ce7d9ed5ff | 1368 | # higher quality PDF documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 1369 | |
| rgrover1 | 981:07ce7d9ed5ff | 1370 | USE_PDFLATEX = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1371 | |
| rgrover1 | 981:07ce7d9ed5ff | 1372 | # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. |
| rgrover1 | 981:07ce7d9ed5ff | 1373 | # command to the generated LaTeX files. This will instruct LaTeX to keep |
| rgrover1 | 981:07ce7d9ed5ff | 1374 | # running if errors occur, instead of asking the user for help. |
| rgrover1 | 981:07ce7d9ed5ff | 1375 | # This option is also used when generating formulas in HTML. |
| rgrover1 | 981:07ce7d9ed5ff | 1376 | |
| rgrover1 | 981:07ce7d9ed5ff | 1377 | LATEX_BATCHMODE = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1378 | |
| rgrover1 | 981:07ce7d9ed5ff | 1379 | # If LATEX_HIDE_INDICES is set to YES then doxygen will not |
| rgrover1 | 981:07ce7d9ed5ff | 1380 | # include the index chapters (such as File Index, Compound Index, etc.) |
| rgrover1 | 981:07ce7d9ed5ff | 1381 | # in the output. |
| rgrover1 | 981:07ce7d9ed5ff | 1382 | |
| rgrover1 | 981:07ce7d9ed5ff | 1383 | LATEX_HIDE_INDICES = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1384 | |
| rgrover1 | 981:07ce7d9ed5ff | 1385 | # If LATEX_SOURCE_CODE is set to YES then doxygen will include |
| rgrover1 | 981:07ce7d9ed5ff | 1386 | # source code with syntax highlighting in the LaTeX output. |
| rgrover1 | 981:07ce7d9ed5ff | 1387 | # Note that which sources are shown also depends on other settings |
| rgrover1 | 981:07ce7d9ed5ff | 1388 | # such as SOURCE_BROWSER. |
| rgrover1 | 981:07ce7d9ed5ff | 1389 | |
| rgrover1 | 981:07ce7d9ed5ff | 1390 | LATEX_SOURCE_CODE = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1391 | |
| rgrover1 | 981:07ce7d9ed5ff | 1392 | # The LATEX_BIB_STYLE tag can be used to specify the style to use for the |
| rgrover1 | 981:07ce7d9ed5ff | 1393 | # bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See |
| rgrover1 | 981:07ce7d9ed5ff | 1394 | # http://en.wikipedia.org/wiki/BibTeX for more info. |
| rgrover1 | 981:07ce7d9ed5ff | 1395 | |
| rgrover1 | 981:07ce7d9ed5ff | 1396 | LATEX_BIB_STYLE = plain |
| rgrover1 | 981:07ce7d9ed5ff | 1397 | |
| rgrover1 | 981:07ce7d9ed5ff | 1398 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1399 | # configuration options related to the RTF output |
| rgrover1 | 981:07ce7d9ed5ff | 1400 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1401 | |
| rgrover1 | 981:07ce7d9ed5ff | 1402 | # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output |
| rgrover1 | 981:07ce7d9ed5ff | 1403 | # The RTF output is optimized for Word 97 and may not look very pretty with |
| rgrover1 | 981:07ce7d9ed5ff | 1404 | # other RTF readers or editors. |
| rgrover1 | 981:07ce7d9ed5ff | 1405 | |
| rgrover1 | 981:07ce7d9ed5ff | 1406 | GENERATE_RTF = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1407 | |
| rgrover1 | 981:07ce7d9ed5ff | 1408 | # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. |
| rgrover1 | 981:07ce7d9ed5ff | 1409 | # If a relative path is entered the value of OUTPUT_DIRECTORY will be |
| rgrover1 | 981:07ce7d9ed5ff | 1410 | # put in front of it. If left blank `rtf' will be used as the default path. |
| rgrover1 | 981:07ce7d9ed5ff | 1411 | |
| rgrover1 | 981:07ce7d9ed5ff | 1412 | RTF_OUTPUT = rtf |
| rgrover1 | 981:07ce7d9ed5ff | 1413 | |
| rgrover1 | 981:07ce7d9ed5ff | 1414 | # If the COMPACT_RTF tag is set to YES Doxygen generates more compact |
| rgrover1 | 981:07ce7d9ed5ff | 1415 | # RTF documents. This may be useful for small projects and may help to |
| rgrover1 | 981:07ce7d9ed5ff | 1416 | # save some trees in general. |
| rgrover1 | 981:07ce7d9ed5ff | 1417 | |
| rgrover1 | 981:07ce7d9ed5ff | 1418 | COMPACT_RTF = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1419 | |
| rgrover1 | 981:07ce7d9ed5ff | 1420 | # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated |
| rgrover1 | 981:07ce7d9ed5ff | 1421 | # will contain hyperlink fields. The RTF file will |
| rgrover1 | 981:07ce7d9ed5ff | 1422 | # contain links (just like the HTML output) instead of page references. |
| rgrover1 | 981:07ce7d9ed5ff | 1423 | # This makes the output suitable for online browsing using WORD or other |
| rgrover1 | 981:07ce7d9ed5ff | 1424 | # programs which support those fields. |
| rgrover1 | 981:07ce7d9ed5ff | 1425 | # Note: wordpad (write) and others do not support links. |
| rgrover1 | 981:07ce7d9ed5ff | 1426 | |
| rgrover1 | 981:07ce7d9ed5ff | 1427 | RTF_HYPERLINKS = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1428 | |
| rgrover1 | 981:07ce7d9ed5ff | 1429 | # Load style sheet definitions from file. Syntax is similar to doxygen's |
| rgrover1 | 981:07ce7d9ed5ff | 1430 | # config file, i.e. a series of assignments. You only have to provide |
| rgrover1 | 981:07ce7d9ed5ff | 1431 | # replacements, missing definitions are set to their default value. |
| rgrover1 | 981:07ce7d9ed5ff | 1432 | |
| rgrover1 | 981:07ce7d9ed5ff | 1433 | RTF_STYLESHEET_FILE = |
| rgrover1 | 981:07ce7d9ed5ff | 1434 | |
| rgrover1 | 981:07ce7d9ed5ff | 1435 | # Set optional variables used in the generation of an rtf document. |
| rgrover1 | 981:07ce7d9ed5ff | 1436 | # Syntax is similar to doxygen's config file. |
| rgrover1 | 981:07ce7d9ed5ff | 1437 | |
| rgrover1 | 981:07ce7d9ed5ff | 1438 | RTF_EXTENSIONS_FILE = |
| rgrover1 | 981:07ce7d9ed5ff | 1439 | |
| rgrover1 | 981:07ce7d9ed5ff | 1440 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1441 | # configuration options related to the man page output |
| rgrover1 | 981:07ce7d9ed5ff | 1442 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1443 | |
| rgrover1 | 981:07ce7d9ed5ff | 1444 | # If the GENERATE_MAN tag is set to YES (the default) Doxygen will |
| rgrover1 | 981:07ce7d9ed5ff | 1445 | # generate man pages |
| rgrover1 | 981:07ce7d9ed5ff | 1446 | |
| rgrover1 | 981:07ce7d9ed5ff | 1447 | GENERATE_MAN = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1448 | |
| rgrover1 | 981:07ce7d9ed5ff | 1449 | # The MAN_OUTPUT tag is used to specify where the man pages will be put. |
| rgrover1 | 981:07ce7d9ed5ff | 1450 | # If a relative path is entered the value of OUTPUT_DIRECTORY will be |
| rgrover1 | 981:07ce7d9ed5ff | 1451 | # put in front of it. If left blank `man' will be used as the default path. |
| rgrover1 | 981:07ce7d9ed5ff | 1452 | |
| rgrover1 | 981:07ce7d9ed5ff | 1453 | MAN_OUTPUT = man |
| rgrover1 | 981:07ce7d9ed5ff | 1454 | |
| rgrover1 | 981:07ce7d9ed5ff | 1455 | # The MAN_EXTENSION tag determines the extension that is added to |
| rgrover1 | 981:07ce7d9ed5ff | 1456 | # the generated man pages (default is the subroutine's section .3) |
| rgrover1 | 981:07ce7d9ed5ff | 1457 | |
| rgrover1 | 981:07ce7d9ed5ff | 1458 | MAN_EXTENSION = .3 |
| rgrover1 | 981:07ce7d9ed5ff | 1459 | |
| rgrover1 | 981:07ce7d9ed5ff | 1460 | # If the MAN_LINKS tag is set to YES and Doxygen generates man output, |
| rgrover1 | 981:07ce7d9ed5ff | 1461 | # then it will generate one additional man file for each entity |
| rgrover1 | 981:07ce7d9ed5ff | 1462 | # documented in the real man page(s). These additional files |
| rgrover1 | 981:07ce7d9ed5ff | 1463 | # only source the real man page, but without them the man command |
| rgrover1 | 981:07ce7d9ed5ff | 1464 | # would be unable to find the correct page. The default is NO. |
| rgrover1 | 981:07ce7d9ed5ff | 1465 | |
| rgrover1 | 981:07ce7d9ed5ff | 1466 | MAN_LINKS = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1467 | |
| rgrover1 | 981:07ce7d9ed5ff | 1468 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1469 | # configuration options related to the XML output |
| rgrover1 | 981:07ce7d9ed5ff | 1470 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1471 | |
| rgrover1 | 981:07ce7d9ed5ff | 1472 | # If the GENERATE_XML tag is set to YES Doxygen will |
| rgrover1 | 981:07ce7d9ed5ff | 1473 | # generate an XML file that captures the structure of |
| rgrover1 | 981:07ce7d9ed5ff | 1474 | # the code including all documentation. |
| rgrover1 | 981:07ce7d9ed5ff | 1475 | |
| rgrover1 | 981:07ce7d9ed5ff | 1476 | GENERATE_XML = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1477 | |
| rgrover1 | 981:07ce7d9ed5ff | 1478 | # The XML_OUTPUT tag is used to specify where the XML pages will be put. |
| rgrover1 | 981:07ce7d9ed5ff | 1479 | # If a relative path is entered the value of OUTPUT_DIRECTORY will be |
| rgrover1 | 981:07ce7d9ed5ff | 1480 | # put in front of it. If left blank `xml' will be used as the default path. |
| rgrover1 | 981:07ce7d9ed5ff | 1481 | |
| rgrover1 | 981:07ce7d9ed5ff | 1482 | XML_OUTPUT = xml |
| rgrover1 | 981:07ce7d9ed5ff | 1483 | |
| rgrover1 | 981:07ce7d9ed5ff | 1484 | # The XML_SCHEMA tag can be used to specify an XML schema, |
| rgrover1 | 981:07ce7d9ed5ff | 1485 | # which can be used by a validating XML parser to check the |
| rgrover1 | 981:07ce7d9ed5ff | 1486 | # syntax of the XML files. |
| rgrover1 | 981:07ce7d9ed5ff | 1487 | |
| rgrover1 | 981:07ce7d9ed5ff | 1488 | XML_SCHEMA = |
| rgrover1 | 981:07ce7d9ed5ff | 1489 | |
| rgrover1 | 981:07ce7d9ed5ff | 1490 | # The XML_DTD tag can be used to specify an XML DTD, |
| rgrover1 | 981:07ce7d9ed5ff | 1491 | # which can be used by a validating XML parser to check the |
| rgrover1 | 981:07ce7d9ed5ff | 1492 | # syntax of the XML files. |
| rgrover1 | 981:07ce7d9ed5ff | 1493 | |
| rgrover1 | 981:07ce7d9ed5ff | 1494 | XML_DTD = |
| rgrover1 | 981:07ce7d9ed5ff | 1495 | |
| rgrover1 | 981:07ce7d9ed5ff | 1496 | # If the XML_PROGRAMLISTING tag is set to YES Doxygen will |
| rgrover1 | 981:07ce7d9ed5ff | 1497 | # dump the program listings (including syntax highlighting |
| rgrover1 | 981:07ce7d9ed5ff | 1498 | # and cross-referencing information) to the XML output. Note that |
| rgrover1 | 981:07ce7d9ed5ff | 1499 | # enabling this will significantly increase the size of the XML output. |
| rgrover1 | 981:07ce7d9ed5ff | 1500 | |
| rgrover1 | 981:07ce7d9ed5ff | 1501 | XML_PROGRAMLISTING = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1502 | |
| rgrover1 | 981:07ce7d9ed5ff | 1503 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1504 | # configuration options related to the DOCBOOK output |
| rgrover1 | 981:07ce7d9ed5ff | 1505 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1506 | |
| rgrover1 | 981:07ce7d9ed5ff | 1507 | # If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files |
| rgrover1 | 981:07ce7d9ed5ff | 1508 | # that can be used to generate PDF. |
| rgrover1 | 981:07ce7d9ed5ff | 1509 | |
| rgrover1 | 981:07ce7d9ed5ff | 1510 | GENERATE_DOCBOOK = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1511 | |
| rgrover1 | 981:07ce7d9ed5ff | 1512 | # The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. |
| rgrover1 | 981:07ce7d9ed5ff | 1513 | # If a relative path is entered the value of OUTPUT_DIRECTORY will be put in |
| rgrover1 | 981:07ce7d9ed5ff | 1514 | # front of it. If left blank docbook will be used as the default path. |
| rgrover1 | 981:07ce7d9ed5ff | 1515 | |
| rgrover1 | 981:07ce7d9ed5ff | 1516 | DOCBOOK_OUTPUT = docbook |
| rgrover1 | 981:07ce7d9ed5ff | 1517 | |
| rgrover1 | 981:07ce7d9ed5ff | 1518 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1519 | # configuration options for the AutoGen Definitions output |
| rgrover1 | 981:07ce7d9ed5ff | 1520 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1521 | |
| rgrover1 | 981:07ce7d9ed5ff | 1522 | # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will |
| rgrover1 | 981:07ce7d9ed5ff | 1523 | # generate an AutoGen Definitions (see autogen.sf.net) file |
| rgrover1 | 981:07ce7d9ed5ff | 1524 | # that captures the structure of the code including all |
| rgrover1 | 981:07ce7d9ed5ff | 1525 | # documentation. Note that this feature is still experimental |
| rgrover1 | 981:07ce7d9ed5ff | 1526 | # and incomplete at the moment. |
| rgrover1 | 981:07ce7d9ed5ff | 1527 | |
| rgrover1 | 981:07ce7d9ed5ff | 1528 | GENERATE_AUTOGEN_DEF = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1529 | |
| rgrover1 | 981:07ce7d9ed5ff | 1530 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1531 | # configuration options related to the Perl module output |
| rgrover1 | 981:07ce7d9ed5ff | 1532 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1533 | |
| rgrover1 | 981:07ce7d9ed5ff | 1534 | # If the GENERATE_PERLMOD tag is set to YES Doxygen will |
| rgrover1 | 981:07ce7d9ed5ff | 1535 | # generate a Perl module file that captures the structure of |
| rgrover1 | 981:07ce7d9ed5ff | 1536 | # the code including all documentation. Note that this |
| rgrover1 | 981:07ce7d9ed5ff | 1537 | # feature is still experimental and incomplete at the |
| rgrover1 | 981:07ce7d9ed5ff | 1538 | # moment. |
| rgrover1 | 981:07ce7d9ed5ff | 1539 | |
| rgrover1 | 981:07ce7d9ed5ff | 1540 | GENERATE_PERLMOD = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1541 | |
| rgrover1 | 981:07ce7d9ed5ff | 1542 | # If the PERLMOD_LATEX tag is set to YES Doxygen will generate |
| rgrover1 | 981:07ce7d9ed5ff | 1543 | # the necessary Makefile rules, Perl scripts and LaTeX code to be able |
| rgrover1 | 981:07ce7d9ed5ff | 1544 | # to generate PDF and DVI output from the Perl module output. |
| rgrover1 | 981:07ce7d9ed5ff | 1545 | |
| rgrover1 | 981:07ce7d9ed5ff | 1546 | PERLMOD_LATEX = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1547 | |
| rgrover1 | 981:07ce7d9ed5ff | 1548 | # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be |
| rgrover1 | 981:07ce7d9ed5ff | 1549 | # nicely formatted so it can be parsed by a human reader. |
| rgrover1 | 981:07ce7d9ed5ff | 1550 | # This is useful |
| rgrover1 | 981:07ce7d9ed5ff | 1551 | # if you want to understand what is going on. |
| rgrover1 | 981:07ce7d9ed5ff | 1552 | # On the other hand, if this |
| rgrover1 | 981:07ce7d9ed5ff | 1553 | # tag is set to NO the size of the Perl module output will be much smaller |
| rgrover1 | 981:07ce7d9ed5ff | 1554 | # and Perl will parse it just the same. |
| rgrover1 | 981:07ce7d9ed5ff | 1555 | |
| rgrover1 | 981:07ce7d9ed5ff | 1556 | PERLMOD_PRETTY = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1557 | |
| rgrover1 | 981:07ce7d9ed5ff | 1558 | # The names of the make variables in the generated doxyrules.make file |
| rgrover1 | 981:07ce7d9ed5ff | 1559 | # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. |
| rgrover1 | 981:07ce7d9ed5ff | 1560 | # This is useful so different doxyrules.make files included by the same |
| rgrover1 | 981:07ce7d9ed5ff | 1561 | # Makefile don't overwrite each other's variables. |
| rgrover1 | 981:07ce7d9ed5ff | 1562 | |
| rgrover1 | 981:07ce7d9ed5ff | 1563 | PERLMOD_MAKEVAR_PREFIX = |
| rgrover1 | 981:07ce7d9ed5ff | 1564 | |
| rgrover1 | 981:07ce7d9ed5ff | 1565 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1566 | # Configuration options related to the preprocessor |
| rgrover1 | 981:07ce7d9ed5ff | 1567 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1568 | |
| rgrover1 | 981:07ce7d9ed5ff | 1569 | # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will |
| rgrover1 | 981:07ce7d9ed5ff | 1570 | # evaluate all C-preprocessor directives found in the sources and include |
| rgrover1 | 981:07ce7d9ed5ff | 1571 | # files. |
| rgrover1 | 981:07ce7d9ed5ff | 1572 | |
| rgrover1 | 981:07ce7d9ed5ff | 1573 | ENABLE_PREPROCESSING = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1574 | |
| rgrover1 | 981:07ce7d9ed5ff | 1575 | # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro |
| rgrover1 | 981:07ce7d9ed5ff | 1576 | # names in the source code. If set to NO (the default) only conditional |
| rgrover1 | 981:07ce7d9ed5ff | 1577 | # compilation will be performed. Macro expansion can be done in a controlled |
| rgrover1 | 981:07ce7d9ed5ff | 1578 | # way by setting EXPAND_ONLY_PREDEF to YES. |
| rgrover1 | 981:07ce7d9ed5ff | 1579 | |
| rgrover1 | 981:07ce7d9ed5ff | 1580 | MACRO_EXPANSION = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1581 | |
| rgrover1 | 981:07ce7d9ed5ff | 1582 | # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES |
| rgrover1 | 981:07ce7d9ed5ff | 1583 | # then the macro expansion is limited to the macros specified with the |
| rgrover1 | 981:07ce7d9ed5ff | 1584 | # PREDEFINED and EXPAND_AS_DEFINED tags. |
| rgrover1 | 981:07ce7d9ed5ff | 1585 | |
| rgrover1 | 981:07ce7d9ed5ff | 1586 | EXPAND_ONLY_PREDEF = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1587 | |
| rgrover1 | 981:07ce7d9ed5ff | 1588 | # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files |
| rgrover1 | 981:07ce7d9ed5ff | 1589 | # pointed to by INCLUDE_PATH will be searched when a #include is found. |
| rgrover1 | 981:07ce7d9ed5ff | 1590 | |
| rgrover1 | 981:07ce7d9ed5ff | 1591 | SEARCH_INCLUDES = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1592 | |
| rgrover1 | 981:07ce7d9ed5ff | 1593 | # The INCLUDE_PATH tag can be used to specify one or more directories that |
| rgrover1 | 981:07ce7d9ed5ff | 1594 | # contain include files that are not input files but should be processed by |
| rgrover1 | 981:07ce7d9ed5ff | 1595 | # the preprocessor. |
| rgrover1 | 981:07ce7d9ed5ff | 1596 | |
| rgrover1 | 981:07ce7d9ed5ff | 1597 | INCLUDE_PATH = |
| rgrover1 | 981:07ce7d9ed5ff | 1598 | |
| rgrover1 | 981:07ce7d9ed5ff | 1599 | # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard |
| rgrover1 | 981:07ce7d9ed5ff | 1600 | # patterns (like *.h and *.hpp) to filter out the header-files in the |
| rgrover1 | 981:07ce7d9ed5ff | 1601 | # directories. If left blank, the patterns specified with FILE_PATTERNS will |
| rgrover1 | 981:07ce7d9ed5ff | 1602 | # be used. |
| rgrover1 | 981:07ce7d9ed5ff | 1603 | |
| rgrover1 | 981:07ce7d9ed5ff | 1604 | INCLUDE_FILE_PATTERNS = |
| rgrover1 | 981:07ce7d9ed5ff | 1605 | |
| rgrover1 | 981:07ce7d9ed5ff | 1606 | # The PREDEFINED tag can be used to specify one or more macro names that |
| rgrover1 | 981:07ce7d9ed5ff | 1607 | # are defined before the preprocessor is started (similar to the -D option of |
| rgrover1 | 981:07ce7d9ed5ff | 1608 | # gcc). The argument of the tag is a list of macros of the form: name |
| rgrover1 | 981:07ce7d9ed5ff | 1609 | # or name=definition (no spaces). If the definition and the = are |
| rgrover1 | 981:07ce7d9ed5ff | 1610 | # omitted =1 is assumed. To prevent a macro definition from being |
| rgrover1 | 981:07ce7d9ed5ff | 1611 | # undefined via #undef or recursively expanded use the := operator |
| rgrover1 | 981:07ce7d9ed5ff | 1612 | # instead of the = operator. |
| rgrover1 | 981:07ce7d9ed5ff | 1613 | |
| rgrover1 | 981:07ce7d9ed5ff | 1614 | PREDEFINED = WIN32 \ |
| rgrover1 | 981:07ce7d9ed5ff | 1615 | NTLM \ |
| rgrover1 | 981:07ce7d9ed5ff | 1616 | USE_LZO \ |
| rgrover1 | 981:07ce7d9ed5ff | 1617 | ENABLE_FRAGMENT \ |
| rgrover1 | 981:07ce7d9ed5ff | 1618 | P2MP \ |
| rgrover1 | 981:07ce7d9ed5ff | 1619 | P2MP_SERVER \ |
| rgrover1 | 981:07ce7d9ed5ff | 1620 | USE_CRYPTO \ |
| rgrover1 | 981:07ce7d9ed5ff | 1621 | USE_SSL \ |
| rgrover1 | 981:07ce7d9ed5ff | 1622 | ENABLE_PLUGIN \ |
| rgrover1 | 981:07ce7d9ed5ff | 1623 | ENABLE_MANAGEMENT \ |
| rgrover1 | 981:07ce7d9ed5ff | 1624 | ENABLE_OCC \ |
| rgrover1 | 981:07ce7d9ed5ff | 1625 | HAVE_GETTIMEOFDAY |
| rgrover1 | 981:07ce7d9ed5ff | 1626 | |
| rgrover1 | 981:07ce7d9ed5ff | 1627 | # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then |
| rgrover1 | 981:07ce7d9ed5ff | 1628 | # this tag can be used to specify a list of macro names that should be expanded. |
| rgrover1 | 981:07ce7d9ed5ff | 1629 | # The macro definition that is found in the sources will be used. |
| rgrover1 | 981:07ce7d9ed5ff | 1630 | # Use the PREDEFINED tag if you want to use a different macro definition that |
| rgrover1 | 981:07ce7d9ed5ff | 1631 | # overrules the definition found in the source code. |
| rgrover1 | 981:07ce7d9ed5ff | 1632 | |
| rgrover1 | 981:07ce7d9ed5ff | 1633 | EXPAND_AS_DEFINED = |
| rgrover1 | 981:07ce7d9ed5ff | 1634 | |
| rgrover1 | 981:07ce7d9ed5ff | 1635 | # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then |
| rgrover1 | 981:07ce7d9ed5ff | 1636 | # doxygen's preprocessor will remove all references to function-like macros |
| rgrover1 | 981:07ce7d9ed5ff | 1637 | # that are alone on a line, have an all uppercase name, and do not end with a |
| rgrover1 | 981:07ce7d9ed5ff | 1638 | # semicolon, because these will confuse the parser if not removed. |
| rgrover1 | 981:07ce7d9ed5ff | 1639 | |
| rgrover1 | 981:07ce7d9ed5ff | 1640 | SKIP_FUNCTION_MACROS = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1641 | |
| rgrover1 | 981:07ce7d9ed5ff | 1642 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1643 | # Configuration::additions related to external references |
| rgrover1 | 981:07ce7d9ed5ff | 1644 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1645 | |
| rgrover1 | 981:07ce7d9ed5ff | 1646 | # The TAGFILES option can be used to specify one or more tagfiles. For each |
| rgrover1 | 981:07ce7d9ed5ff | 1647 | # tag file the location of the external documentation should be added. The |
| rgrover1 | 981:07ce7d9ed5ff | 1648 | # format of a tag file without this location is as follows: |
| rgrover1 | 981:07ce7d9ed5ff | 1649 | # |
| rgrover1 | 981:07ce7d9ed5ff | 1650 | # TAGFILES = file1 file2 ... |
| rgrover1 | 981:07ce7d9ed5ff | 1651 | # Adding location for the tag files is done as follows: |
| rgrover1 | 981:07ce7d9ed5ff | 1652 | # |
| rgrover1 | 981:07ce7d9ed5ff | 1653 | # TAGFILES = file1=loc1 "file2 = loc2" ... |
| rgrover1 | 981:07ce7d9ed5ff | 1654 | # where "loc1" and "loc2" can be relative or absolute paths |
| rgrover1 | 981:07ce7d9ed5ff | 1655 | # or URLs. Note that each tag file must have a unique name (where the name does |
| rgrover1 | 981:07ce7d9ed5ff | 1656 | # NOT include the path). If a tag file is not located in the directory in which |
| rgrover1 | 981:07ce7d9ed5ff | 1657 | # doxygen is run, you must also specify the path to the tagfile here. |
| rgrover1 | 981:07ce7d9ed5ff | 1658 | |
| rgrover1 | 981:07ce7d9ed5ff | 1659 | TAGFILES = |
| rgrover1 | 981:07ce7d9ed5ff | 1660 | |
| rgrover1 | 981:07ce7d9ed5ff | 1661 | # When a file name is specified after GENERATE_TAGFILE, doxygen will create |
| rgrover1 | 981:07ce7d9ed5ff | 1662 | # a tag file that is based on the input files it reads. |
| rgrover1 | 981:07ce7d9ed5ff | 1663 | |
| rgrover1 | 981:07ce7d9ed5ff | 1664 | GENERATE_TAGFILE = |
| rgrover1 | 981:07ce7d9ed5ff | 1665 | |
| rgrover1 | 981:07ce7d9ed5ff | 1666 | # If the ALLEXTERNALS tag is set to YES all external classes will be listed |
| rgrover1 | 981:07ce7d9ed5ff | 1667 | # in the class index. If set to NO only the inherited external classes |
| rgrover1 | 981:07ce7d9ed5ff | 1668 | # will be listed. |
| rgrover1 | 981:07ce7d9ed5ff | 1669 | |
| rgrover1 | 981:07ce7d9ed5ff | 1670 | ALLEXTERNALS = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1671 | |
| rgrover1 | 981:07ce7d9ed5ff | 1672 | # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed |
| rgrover1 | 981:07ce7d9ed5ff | 1673 | # in the modules index. If set to NO, only the current project's groups will |
| rgrover1 | 981:07ce7d9ed5ff | 1674 | # be listed. |
| rgrover1 | 981:07ce7d9ed5ff | 1675 | |
| rgrover1 | 981:07ce7d9ed5ff | 1676 | EXTERNAL_GROUPS = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1677 | |
| rgrover1 | 981:07ce7d9ed5ff | 1678 | # If the EXTERNAL_PAGES tag is set to YES all external pages will be listed |
| rgrover1 | 981:07ce7d9ed5ff | 1679 | # in the related pages index. If set to NO, only the current project's |
| rgrover1 | 981:07ce7d9ed5ff | 1680 | # pages will be listed. |
| rgrover1 | 981:07ce7d9ed5ff | 1681 | |
| rgrover1 | 981:07ce7d9ed5ff | 1682 | EXTERNAL_PAGES = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1683 | |
| rgrover1 | 981:07ce7d9ed5ff | 1684 | # The PERL_PATH should be the absolute path and name of the perl script |
| rgrover1 | 981:07ce7d9ed5ff | 1685 | # interpreter (i.e. the result of `which perl'). |
| rgrover1 | 981:07ce7d9ed5ff | 1686 | |
| rgrover1 | 981:07ce7d9ed5ff | 1687 | PERL_PATH = /usr/bin/perl |
| rgrover1 | 981:07ce7d9ed5ff | 1688 | |
| rgrover1 | 981:07ce7d9ed5ff | 1689 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1690 | # Configuration options related to the dot tool |
| rgrover1 | 981:07ce7d9ed5ff | 1691 | #--------------------------------------------------------------------------- |
| rgrover1 | 981:07ce7d9ed5ff | 1692 | |
| rgrover1 | 981:07ce7d9ed5ff | 1693 | # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will |
| rgrover1 | 981:07ce7d9ed5ff | 1694 | # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base |
| rgrover1 | 981:07ce7d9ed5ff | 1695 | # or super classes. Setting the tag to NO turns the diagrams off. Note that |
| rgrover1 | 981:07ce7d9ed5ff | 1696 | # this option also works with HAVE_DOT disabled, but it is recommended to |
| rgrover1 | 981:07ce7d9ed5ff | 1697 | # install and use dot, since it yields more powerful graphs. |
| rgrover1 | 981:07ce7d9ed5ff | 1698 | |
| rgrover1 | 981:07ce7d9ed5ff | 1699 | CLASS_DIAGRAMS = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1700 | |
| rgrover1 | 981:07ce7d9ed5ff | 1701 | # You can define message sequence charts within doxygen comments using the \msc |
| rgrover1 | 981:07ce7d9ed5ff | 1702 | # command. Doxygen will then run the mscgen tool (see |
| rgrover1 | 981:07ce7d9ed5ff | 1703 | # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the |
| rgrover1 | 981:07ce7d9ed5ff | 1704 | # documentation. The MSCGEN_PATH tag allows you to specify the directory where |
| rgrover1 | 981:07ce7d9ed5ff | 1705 | # the mscgen tool resides. If left empty the tool is assumed to be found in the |
| rgrover1 | 981:07ce7d9ed5ff | 1706 | # default search path. |
| rgrover1 | 981:07ce7d9ed5ff | 1707 | |
| rgrover1 | 981:07ce7d9ed5ff | 1708 | MSCGEN_PATH = |
| rgrover1 | 981:07ce7d9ed5ff | 1709 | |
| rgrover1 | 981:07ce7d9ed5ff | 1710 | # If set to YES, the inheritance and collaboration graphs will hide |
| rgrover1 | 981:07ce7d9ed5ff | 1711 | # inheritance and usage relations if the target is undocumented |
| rgrover1 | 981:07ce7d9ed5ff | 1712 | # or is not a class. |
| rgrover1 | 981:07ce7d9ed5ff | 1713 | |
| rgrover1 | 981:07ce7d9ed5ff | 1714 | HIDE_UNDOC_RELATIONS = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1715 | |
| rgrover1 | 981:07ce7d9ed5ff | 1716 | # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is |
| rgrover1 | 981:07ce7d9ed5ff | 1717 | # available from the path. This tool is part of Graphviz, a graph visualization |
| rgrover1 | 981:07ce7d9ed5ff | 1718 | # toolkit from AT&T and Lucent Bell Labs. The other options in this section |
| rgrover1 | 981:07ce7d9ed5ff | 1719 | # have no effect if this option is set to NO (the default) |
| rgrover1 | 981:07ce7d9ed5ff | 1720 | |
| rgrover1 | 981:07ce7d9ed5ff | 1721 | HAVE_DOT = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1722 | |
| rgrover1 | 981:07ce7d9ed5ff | 1723 | # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is |
| rgrover1 | 981:07ce7d9ed5ff | 1724 | # allowed to run in parallel. When set to 0 (the default) doxygen will |
| rgrover1 | 981:07ce7d9ed5ff | 1725 | # base this on the number of processors available in the system. You can set it |
| rgrover1 | 981:07ce7d9ed5ff | 1726 | # explicitly to a value larger than 0 to get control over the balance |
| rgrover1 | 981:07ce7d9ed5ff | 1727 | # between CPU load and processing speed. |
| rgrover1 | 981:07ce7d9ed5ff | 1728 | |
| rgrover1 | 981:07ce7d9ed5ff | 1729 | DOT_NUM_THREADS = 0 |
| rgrover1 | 981:07ce7d9ed5ff | 1730 | |
| rgrover1 | 981:07ce7d9ed5ff | 1731 | # By default doxygen will use the Helvetica font for all dot files that |
| rgrover1 | 981:07ce7d9ed5ff | 1732 | # doxygen generates. When you want a differently looking font you can specify |
| rgrover1 | 981:07ce7d9ed5ff | 1733 | # the font name using DOT_FONTNAME. You need to make sure dot is able to find |
| rgrover1 | 981:07ce7d9ed5ff | 1734 | # the font, which can be done by putting it in a standard location or by setting |
| rgrover1 | 981:07ce7d9ed5ff | 1735 | # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the |
| rgrover1 | 981:07ce7d9ed5ff | 1736 | # directory containing the font. |
| rgrover1 | 981:07ce7d9ed5ff | 1737 | |
| rgrover1 | 981:07ce7d9ed5ff | 1738 | DOT_FONTNAME = Helvetica |
| rgrover1 | 981:07ce7d9ed5ff | 1739 | |
| rgrover1 | 981:07ce7d9ed5ff | 1740 | # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. |
| rgrover1 | 981:07ce7d9ed5ff | 1741 | # The default size is 10pt. |
| rgrover1 | 981:07ce7d9ed5ff | 1742 | |
| rgrover1 | 981:07ce7d9ed5ff | 1743 | DOT_FONTSIZE = 10 |
| rgrover1 | 981:07ce7d9ed5ff | 1744 | |
| rgrover1 | 981:07ce7d9ed5ff | 1745 | # By default doxygen will tell dot to use the Helvetica font. |
| rgrover1 | 981:07ce7d9ed5ff | 1746 | # If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to |
| rgrover1 | 981:07ce7d9ed5ff | 1747 | # set the path where dot can find it. |
| rgrover1 | 981:07ce7d9ed5ff | 1748 | |
| rgrover1 | 981:07ce7d9ed5ff | 1749 | DOT_FONTPATH = |
| rgrover1 | 981:07ce7d9ed5ff | 1750 | |
| rgrover1 | 981:07ce7d9ed5ff | 1751 | # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen |
| rgrover1 | 981:07ce7d9ed5ff | 1752 | # will generate a graph for each documented class showing the direct and |
| rgrover1 | 981:07ce7d9ed5ff | 1753 | # indirect inheritance relations. Setting this tag to YES will force the |
| rgrover1 | 981:07ce7d9ed5ff | 1754 | # CLASS_DIAGRAMS tag to NO. |
| rgrover1 | 981:07ce7d9ed5ff | 1755 | |
| rgrover1 | 981:07ce7d9ed5ff | 1756 | CLASS_GRAPH = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1757 | |
| rgrover1 | 981:07ce7d9ed5ff | 1758 | # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen |
| rgrover1 | 981:07ce7d9ed5ff | 1759 | # will generate a graph for each documented class showing the direct and |
| rgrover1 | 981:07ce7d9ed5ff | 1760 | # indirect implementation dependencies (inheritance, containment, and |
| rgrover1 | 981:07ce7d9ed5ff | 1761 | # class references variables) of the class with other documented classes. |
| rgrover1 | 981:07ce7d9ed5ff | 1762 | |
| rgrover1 | 981:07ce7d9ed5ff | 1763 | COLLABORATION_GRAPH = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1764 | |
| rgrover1 | 981:07ce7d9ed5ff | 1765 | # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen |
| rgrover1 | 981:07ce7d9ed5ff | 1766 | # will generate a graph for groups, showing the direct groups dependencies |
| rgrover1 | 981:07ce7d9ed5ff | 1767 | |
| rgrover1 | 981:07ce7d9ed5ff | 1768 | GROUP_GRAPHS = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1769 | |
| rgrover1 | 981:07ce7d9ed5ff | 1770 | # If the UML_LOOK tag is set to YES doxygen will generate inheritance and |
| rgrover1 | 981:07ce7d9ed5ff | 1771 | # collaboration diagrams in a style similar to the OMG's Unified Modeling |
| rgrover1 | 981:07ce7d9ed5ff | 1772 | # Language. |
| rgrover1 | 981:07ce7d9ed5ff | 1773 | |
| rgrover1 | 981:07ce7d9ed5ff | 1774 | UML_LOOK = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1775 | |
| rgrover1 | 981:07ce7d9ed5ff | 1776 | # If the UML_LOOK tag is enabled, the fields and methods are shown inside |
| rgrover1 | 981:07ce7d9ed5ff | 1777 | # the class node. If there are many fields or methods and many nodes the |
| rgrover1 | 981:07ce7d9ed5ff | 1778 | # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS |
| rgrover1 | 981:07ce7d9ed5ff | 1779 | # threshold limits the number of items for each type to make the size more |
| rgrover1 | 981:07ce7d9ed5ff | 1780 | # manageable. Set this to 0 for no limit. Note that the threshold may be |
| rgrover1 | 981:07ce7d9ed5ff | 1781 | # exceeded by 50% before the limit is enforced. |
| rgrover1 | 981:07ce7d9ed5ff | 1782 | |
| rgrover1 | 981:07ce7d9ed5ff | 1783 | UML_LIMIT_NUM_FIELDS = 10 |
| rgrover1 | 981:07ce7d9ed5ff | 1784 | |
| rgrover1 | 981:07ce7d9ed5ff | 1785 | # If set to YES, the inheritance and collaboration graphs will show the |
| rgrover1 | 981:07ce7d9ed5ff | 1786 | # relations between templates and their instances. |
| rgrover1 | 981:07ce7d9ed5ff | 1787 | |
| rgrover1 | 981:07ce7d9ed5ff | 1788 | TEMPLATE_RELATIONS = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1789 | |
| rgrover1 | 981:07ce7d9ed5ff | 1790 | # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT |
| rgrover1 | 981:07ce7d9ed5ff | 1791 | # tags are set to YES then doxygen will generate a graph for each documented |
| rgrover1 | 981:07ce7d9ed5ff | 1792 | # file showing the direct and indirect include dependencies of the file with |
| rgrover1 | 981:07ce7d9ed5ff | 1793 | # other documented files. |
| rgrover1 | 981:07ce7d9ed5ff | 1794 | |
| rgrover1 | 981:07ce7d9ed5ff | 1795 | INCLUDE_GRAPH = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1796 | |
| rgrover1 | 981:07ce7d9ed5ff | 1797 | # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and |
| rgrover1 | 981:07ce7d9ed5ff | 1798 | # HAVE_DOT tags are set to YES then doxygen will generate a graph for each |
| rgrover1 | 981:07ce7d9ed5ff | 1799 | # documented header file showing the documented files that directly or |
| rgrover1 | 981:07ce7d9ed5ff | 1800 | # indirectly include this file. |
| rgrover1 | 981:07ce7d9ed5ff | 1801 | |
| rgrover1 | 981:07ce7d9ed5ff | 1802 | INCLUDED_BY_GRAPH = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1803 | |
| rgrover1 | 981:07ce7d9ed5ff | 1804 | # If the CALL_GRAPH and HAVE_DOT options are set to YES then |
| rgrover1 | 981:07ce7d9ed5ff | 1805 | # doxygen will generate a call dependency graph for every global function |
| rgrover1 | 981:07ce7d9ed5ff | 1806 | # or class method. Note that enabling this option will significantly increase |
| rgrover1 | 981:07ce7d9ed5ff | 1807 | # the time of a run. So in most cases it will be better to enable call graphs |
| rgrover1 | 981:07ce7d9ed5ff | 1808 | # for selected functions only using the \callgraph command. |
| rgrover1 | 981:07ce7d9ed5ff | 1809 | |
| rgrover1 | 981:07ce7d9ed5ff | 1810 | CALL_GRAPH = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1811 | |
| rgrover1 | 981:07ce7d9ed5ff | 1812 | # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then |
| rgrover1 | 981:07ce7d9ed5ff | 1813 | # doxygen will generate a caller dependency graph for every global function |
| rgrover1 | 981:07ce7d9ed5ff | 1814 | # or class method. Note that enabling this option will significantly increase |
| rgrover1 | 981:07ce7d9ed5ff | 1815 | # the time of a run. So in most cases it will be better to enable caller |
| rgrover1 | 981:07ce7d9ed5ff | 1816 | # graphs for selected functions only using the \callergraph command. |
| rgrover1 | 981:07ce7d9ed5ff | 1817 | |
| rgrover1 | 981:07ce7d9ed5ff | 1818 | CALLER_GRAPH = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1819 | |
| rgrover1 | 981:07ce7d9ed5ff | 1820 | # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen |
| rgrover1 | 981:07ce7d9ed5ff | 1821 | # will generate a graphical hierarchy of all classes instead of a textual one. |
| rgrover1 | 981:07ce7d9ed5ff | 1822 | |
| rgrover1 | 981:07ce7d9ed5ff | 1823 | GRAPHICAL_HIERARCHY = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1824 | |
| rgrover1 | 981:07ce7d9ed5ff | 1825 | # If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES |
| rgrover1 | 981:07ce7d9ed5ff | 1826 | # then doxygen will show the dependencies a directory has on other directories |
| rgrover1 | 981:07ce7d9ed5ff | 1827 | # in a graphical way. The dependency relations are determined by the #include |
| rgrover1 | 981:07ce7d9ed5ff | 1828 | # relations between the files in the directories. |
| rgrover1 | 981:07ce7d9ed5ff | 1829 | |
| rgrover1 | 981:07ce7d9ed5ff | 1830 | DIRECTORY_GRAPH = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1831 | |
| rgrover1 | 981:07ce7d9ed5ff | 1832 | # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images |
| rgrover1 | 981:07ce7d9ed5ff | 1833 | # generated by dot. Possible values are svg, png, jpg, or gif. |
| rgrover1 | 981:07ce7d9ed5ff | 1834 | # If left blank png will be used. If you choose svg you need to set |
| rgrover1 | 981:07ce7d9ed5ff | 1835 | # HTML_FILE_EXTENSION to xhtml in order to make the SVG files |
| rgrover1 | 981:07ce7d9ed5ff | 1836 | # visible in IE 9+ (other browsers do not have this requirement). |
| rgrover1 | 981:07ce7d9ed5ff | 1837 | |
| rgrover1 | 981:07ce7d9ed5ff | 1838 | DOT_IMAGE_FORMAT = png |
| rgrover1 | 981:07ce7d9ed5ff | 1839 | |
| rgrover1 | 981:07ce7d9ed5ff | 1840 | # If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to |
| rgrover1 | 981:07ce7d9ed5ff | 1841 | # enable generation of interactive SVG images that allow zooming and panning. |
| rgrover1 | 981:07ce7d9ed5ff | 1842 | # Note that this requires a modern browser other than Internet Explorer. |
| rgrover1 | 981:07ce7d9ed5ff | 1843 | # Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you |
| rgrover1 | 981:07ce7d9ed5ff | 1844 | # need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files |
| rgrover1 | 981:07ce7d9ed5ff | 1845 | # visible. Older versions of IE do not have SVG support. |
| rgrover1 | 981:07ce7d9ed5ff | 1846 | |
| rgrover1 | 981:07ce7d9ed5ff | 1847 | INTERACTIVE_SVG = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1848 | |
| rgrover1 | 981:07ce7d9ed5ff | 1849 | # The tag DOT_PATH can be used to specify the path where the dot tool can be |
| rgrover1 | 981:07ce7d9ed5ff | 1850 | # found. If left blank, it is assumed the dot tool can be found in the path. |
| rgrover1 | 981:07ce7d9ed5ff | 1851 | |
| rgrover1 | 981:07ce7d9ed5ff | 1852 | DOT_PATH = |
| rgrover1 | 981:07ce7d9ed5ff | 1853 | |
| rgrover1 | 981:07ce7d9ed5ff | 1854 | # The DOTFILE_DIRS tag can be used to specify one or more directories that |
| rgrover1 | 981:07ce7d9ed5ff | 1855 | # contain dot files that are included in the documentation (see the |
| rgrover1 | 981:07ce7d9ed5ff | 1856 | # \dotfile command). |
| rgrover1 | 981:07ce7d9ed5ff | 1857 | |
| rgrover1 | 981:07ce7d9ed5ff | 1858 | DOTFILE_DIRS = |
| rgrover1 | 981:07ce7d9ed5ff | 1859 | |
| rgrover1 | 981:07ce7d9ed5ff | 1860 | # The MSCFILE_DIRS tag can be used to specify one or more directories that |
| rgrover1 | 981:07ce7d9ed5ff | 1861 | # contain msc files that are included in the documentation (see the |
| rgrover1 | 981:07ce7d9ed5ff | 1862 | # \mscfile command). |
| rgrover1 | 981:07ce7d9ed5ff | 1863 | |
| rgrover1 | 981:07ce7d9ed5ff | 1864 | MSCFILE_DIRS = |
| rgrover1 | 981:07ce7d9ed5ff | 1865 | |
| rgrover1 | 981:07ce7d9ed5ff | 1866 | # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of |
| rgrover1 | 981:07ce7d9ed5ff | 1867 | # nodes that will be shown in the graph. If the number of nodes in a graph |
| rgrover1 | 981:07ce7d9ed5ff | 1868 | # becomes larger than this value, doxygen will truncate the graph, which is |
| rgrover1 | 981:07ce7d9ed5ff | 1869 | # visualized by representing a node as a red box. Note that doxygen if the |
| rgrover1 | 981:07ce7d9ed5ff | 1870 | # number of direct children of the root node in a graph is already larger than |
| rgrover1 | 981:07ce7d9ed5ff | 1871 | # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note |
| rgrover1 | 981:07ce7d9ed5ff | 1872 | # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. |
| rgrover1 | 981:07ce7d9ed5ff | 1873 | |
| rgrover1 | 981:07ce7d9ed5ff | 1874 | DOT_GRAPH_MAX_NODES = 200 |
| rgrover1 | 981:07ce7d9ed5ff | 1875 | |
| rgrover1 | 981:07ce7d9ed5ff | 1876 | # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the |
| rgrover1 | 981:07ce7d9ed5ff | 1877 | # graphs generated by dot. A depth value of 3 means that only nodes reachable |
| rgrover1 | 981:07ce7d9ed5ff | 1878 | # from the root by following a path via at most 3 edges will be shown. Nodes |
| rgrover1 | 981:07ce7d9ed5ff | 1879 | # that lay further from the root node will be omitted. Note that setting this |
| rgrover1 | 981:07ce7d9ed5ff | 1880 | # option to 1 or 2 may greatly reduce the computation time needed for large |
| rgrover1 | 981:07ce7d9ed5ff | 1881 | # code bases. Also note that the size of a graph can be further restricted by |
| rgrover1 | 981:07ce7d9ed5ff | 1882 | # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. |
| rgrover1 | 981:07ce7d9ed5ff | 1883 | |
| rgrover1 | 981:07ce7d9ed5ff | 1884 | MAX_DOT_GRAPH_DEPTH = 1000 |
| rgrover1 | 981:07ce7d9ed5ff | 1885 | |
| rgrover1 | 981:07ce7d9ed5ff | 1886 | # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent |
| rgrover1 | 981:07ce7d9ed5ff | 1887 | # background. This is disabled by default, because dot on Windows does not |
| rgrover1 | 981:07ce7d9ed5ff | 1888 | # seem to support this out of the box. Warning: Depending on the platform used, |
| rgrover1 | 981:07ce7d9ed5ff | 1889 | # enabling this option may lead to badly anti-aliased labels on the edges of |
| rgrover1 | 981:07ce7d9ed5ff | 1890 | # a graph (i.e. they become hard to read). |
| rgrover1 | 981:07ce7d9ed5ff | 1891 | |
| rgrover1 | 981:07ce7d9ed5ff | 1892 | DOT_TRANSPARENT = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1893 | |
| rgrover1 | 981:07ce7d9ed5ff | 1894 | # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output |
| rgrover1 | 981:07ce7d9ed5ff | 1895 | # files in one run (i.e. multiple -o and -T options on the command line). This |
| rgrover1 | 981:07ce7d9ed5ff | 1896 | # makes dot run faster, but since only newer versions of dot (>1.8.10) |
| rgrover1 | 981:07ce7d9ed5ff | 1897 | # support this, this feature is disabled by default. |
| rgrover1 | 981:07ce7d9ed5ff | 1898 | |
| rgrover1 | 981:07ce7d9ed5ff | 1899 | DOT_MULTI_TARGETS = NO |
| rgrover1 | 981:07ce7d9ed5ff | 1900 | |
| rgrover1 | 981:07ce7d9ed5ff | 1901 | # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will |
| rgrover1 | 981:07ce7d9ed5ff | 1902 | # generate a legend page explaining the meaning of the various boxes and |
| rgrover1 | 981:07ce7d9ed5ff | 1903 | # arrows in the dot generated graphs. |
| rgrover1 | 981:07ce7d9ed5ff | 1904 | |
| rgrover1 | 981:07ce7d9ed5ff | 1905 | GENERATE_LEGEND = YES |
| rgrover1 | 981:07ce7d9ed5ff | 1906 | |
| rgrover1 | 981:07ce7d9ed5ff | 1907 | # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will |
| rgrover1 | 981:07ce7d9ed5ff | 1908 | # remove the intermediate dot files that are used to generate |
| rgrover1 | 981:07ce7d9ed5ff | 1909 | # the various graphs. |
| rgrover1 | 981:07ce7d9ed5ff | 1910 | |
| rgrover1 | 981:07ce7d9ed5ff | 1911 | DOT_CLEANUP = YES |