BLE_API - BLE

Users » tlon_citizen » Code » BLE_API

BLE

Fork of BLE_API by Bluetooth Low Energy

ble/BLE.h@753:424c2ae44553, 2015-07-21 (annotated)

Committer:: rgrover1
Date:: Tue Jul 21 13:25:39 2015 +0100
Revision:: 753:424c2ae44553
Parent:: 752:868b6dd7a6bf
Child:: 807:50c121156a71

Synchronized with git rev 5eda1ad9

Author: Rohit Grover

make signature of BLE::onRadioNotification() more explicit.



void onRadioNotification(void (*callback)(bool))

This then is extended in Gap.h by:



    template <typename T>

    void onRadioNotification(T *tptr, void (T::*mptr)(bool));

Who changed what in which revision?

User	Revision	Line number	New contents of line
rgrover1	717:11b41f651697	1	/* mbed Microcontroller Library
rgrover1	717:11b41f651697	2	* Copyright (c) 2006-2013 ARM Limited
rgrover1	717:11b41f651697	3	*
rgrover1	717:11b41f651697	4	* Licensed under the Apache License, Version 2.0 (the "License");
rgrover1	717:11b41f651697	5	* you may not use this file except in compliance with the License.
rgrover1	717:11b41f651697	6	* You may obtain a copy of the License at
rgrover1	717:11b41f651697	7	*
rgrover1	717:11b41f651697	8	* http://www.apache.org/licenses/LICENSE-2.0
rgrover1	717:11b41f651697	9	*
rgrover1	717:11b41f651697	10	* Unless required by applicable law or agreed to in writing, software
rgrover1	717:11b41f651697	11	* distributed under the License is distributed on an "AS IS" BASIS,
rgrover1	717:11b41f651697	12	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1	717:11b41f651697	13	* See the License for the specific language governing permissions and
rgrover1	717:11b41f651697	14	* limitations under the License.
rgrover1	717:11b41f651697	15	*/
rgrover1	717:11b41f651697	16
rgrover1	717:11b41f651697	17	#ifndef __BLE_H__
rgrover1	717:11b41f651697	18	#define __BLE_H__
rgrover1	717:11b41f651697	19
rgrover1	717:11b41f651697	20	#include "blecommon.h"
rgrover1	717:11b41f651697	21	#include "Gap.h"
rgrover1	717:11b41f651697	22	#include "GattServer.h"
rgrover1	717:11b41f651697	23	#include "GattClient.h"
rgrover1	717:11b41f651697	24	#include "BLEInstanceBase.h"
rgrover1	717:11b41f651697	25
rgrover1	717:11b41f651697	26	/**
rgrover1	717:11b41f651697	27	* The base class used to abstract away BLE capable radio transceivers or SOCs,
rgrover1	717:11b41f651697	28	* to enable this BLE API to work with any radio transparently.
rgrover1	717:11b41f651697	29	*/
rgrover1	717:11b41f651697	30	class BLE
rgrover1	717:11b41f651697	31	{
rgrover1	717:11b41f651697	32	public:
rgrover1	717:11b41f651697	33	/**
rgrover1	717:11b41f651697	34	* Initialize the BLE controller. This should be called before using
rgrover1	717:11b41f651697	35	* anything else in the BLE_API.
rgrover1	717:11b41f651697	36	*
rgrover1	717:11b41f651697	37	* init() hands control to the underlying BLE module to accomplish
rgrover1	717:11b41f651697	38	* initialization. This initialization may tacitly depend on other hardware
rgrover1	717:11b41f651697	39	* setup (such as clocks or power-modes) which happens early on during
rgrover1	717:11b41f651697	40	* system startup. It may not be safe to call init() from global static
rgrover1	717:11b41f651697	41	* context where ordering is compiler specific and can't be guaranteed--it
rgrover1	717:11b41f651697	42	* is safe to call BLE::init() from within main().
rgrover1	717:11b41f651697	43	*/
rgrover1	717:11b41f651697	44	ble_error_t init();
rgrover1	717:11b41f651697	45
rgrover1	717:11b41f651697	46	/**
rgrover1	717:11b41f651697	47	* Purge the BLE stack of GATT and GAP state. init() must be called
rgrover1	717:11b41f651697	48	* afterwards to re-instate services and GAP state. This API offers a way to
rgrover1	717:11b41f651697	49	* repopulate the GATT database with new services and characteristics.
rgrover1	717:11b41f651697	50	*/
rgrover1	717:11b41f651697	51	ble_error_t shutdown(void) {
rgrover1	717:11b41f651697	52	clearAdvertisingPayload();
rgrover1	717:11b41f651697	53	return transport->shutdown();
rgrover1	717:11b41f651697	54	}
rgrover1	717:11b41f651697	55
rgrover1	717:11b41f651697	56	/**
rgrover1	717:11b41f651697	57	* This call allows the application to get the BLE stack version information.
rgrover1	717:11b41f651697	58	*
rgrover1	717:11b41f651697	59	* @return A pointer to a const string representing the version.
rgrover1	717:11b41f651697	60	* Note: The string is owned by the BLE_API.
rgrover1	717:11b41f651697	61	*/
rgrover1	717:11b41f651697	62	const char *getVersion(void) {
rgrover1	717:11b41f651697	63	return transport->getVersion();
rgrover1	717:11b41f651697	64	}
rgrover1	717:11b41f651697	65
rgrover1	717:11b41f651697	66	/*
rgrover1	717:11b41f651697	67	* Accessors to GAP. Please refer to Gap.h. All GAP related functionality requires
rgrover1	717:11b41f651697	68	* going through this accessor.
rgrover1	717:11b41f651697	69	*/
rgrover1	717:11b41f651697	70	const Gap &gap() const {
rgrover1	717:11b41f651697	71	return transport->getGap();
rgrover1	717:11b41f651697	72	}
rgrover1	717:11b41f651697	73	Gap &gap() {
rgrover1	717:11b41f651697	74	return transport->getGap();
rgrover1	717:11b41f651697	75	}
rgrover1	717:11b41f651697	76
rgrover1	717:11b41f651697	77	/*
rgrover1	717:11b41f651697	78	* Accessors to GATT Server. Please refer to GattServer.h. All GATTServer related
rgrover1	717:11b41f651697	79	* functionality requires going through this accessor.
rgrover1	717:11b41f651697	80	*/
rgrover1	717:11b41f651697	81	const GattServer& gattServer() const {
rgrover1	717:11b41f651697	82	return transport->getGattServer();
rgrover1	717:11b41f651697	83	}
rgrover1	717:11b41f651697	84	GattServer& gattServer() {
rgrover1	717:11b41f651697	85	return transport->getGattServer();
rgrover1	717:11b41f651697	86	}
rgrover1	717:11b41f651697	87
rgrover1	717:11b41f651697	88	/*
rgrover1	717:11b41f651697	89	* Accessors to GATT Client. Please refer to GattClient.h. All GATTClient related
rgrover1	717:11b41f651697	90	* functionality requires going through this accessor.
rgrover1	717:11b41f651697	91	*/
rgrover1	717:11b41f651697	92	const GattClient& gattClient() const {
rgrover1	717:11b41f651697	93	return transport->getGattClient();
rgrover1	717:11b41f651697	94	}
rgrover1	717:11b41f651697	95	GattClient& gattClient() {
rgrover1	717:11b41f651697	96	return transport->getGattClient();
rgrover1	717:11b41f651697	97	}
rgrover1	717:11b41f651697	98
rgrover1	717:11b41f651697	99	/*
rgrover1	717:11b41f651697	100	* Accessors to Security Manager. Please refer to SecurityManager.h. All
rgrover1	717:11b41f651697	101	* SecurityManager related functionality requires going through this
rgrover1	717:11b41f651697	102	* accessor.
rgrover1	717:11b41f651697	103	*/
rgrover1	717:11b41f651697	104	const SecurityManager& securityManager() const {
rgrover1	717:11b41f651697	105	return transport->getSecurityManager();
rgrover1	717:11b41f651697	106	}
rgrover1	717:11b41f651697	107	SecurityManager& securityManager() {
rgrover1	717:11b41f651697	108	return transport->getSecurityManager();
rgrover1	717:11b41f651697	109	}
rgrover1	717:11b41f651697	110
rgrover1	717:11b41f651697	111	/**
rgrover1	717:11b41f651697	112	* Yield control to the BLE stack or to other tasks waiting for events. This
rgrover1	717:11b41f651697	113	* is a sleep function which will return when there is an application
rgrover1	717:11b41f651697	114	* specific interrupt, but the MCU might wake up several times before
rgrover1	717:11b41f651697	115	* returning (to service the stack). This is not always interchangeable with
rgrover1	717:11b41f651697	116	* WFE().
rgrover1	717:11b41f651697	117	*/
rgrover1	717:11b41f651697	118	void waitForEvent(void) {
rgrover1	717:11b41f651697	119	transport->waitForEvent();
rgrover1	717:11b41f651697	120	}
rgrover1	717:11b41f651697	121
rgrover1	717:11b41f651697	122	/*
rgrover1	717:11b41f651697	123	* Deprecation alert!
rgrover1	717:11b41f651697	124	* All of the following are deprecated and may be dropped in a future
rgrover1	717:11b41f651697	125	* release. Documentation should refer to alternative APIs.
rgrover1	717:11b41f651697	126	*/
rgrover1	717:11b41f651697	127
rgrover1	717:11b41f651697	128	/* GAP specific APIs. */
rgrover1	717:11b41f651697	129	public:
rgrover1	717:11b41f651697	130	/**
rgrover1	717:11b41f651697	131	* Set the BTLE MAC address and type.
rgrover1	717:11b41f651697	132	* @return BLE_ERROR_NONE on success.
rgrover1	717:11b41f651697	133	*
rgrover1	717:11b41f651697	134	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	135	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	136	* ble.setAddress(...) should be replaced with
rgrover1	717:11b41f651697	137	* ble.gap().setAddress(...).
rgrover1	717:11b41f651697	138	*/
rgrover1	717:11b41f651697	139	ble_error_t setAddress(Gap::AddressType_t type, const Gap::Address_t address) {
rgrover1	717:11b41f651697	140	return gap().setAddress(type, address);
rgrover1	717:11b41f651697	141	}
rgrover1	717:11b41f651697	142
rgrover1	717:11b41f651697	143	/**
rgrover1	717:11b41f651697	144	* Fetch the BTLE MAC address and type.
rgrover1	717:11b41f651697	145	* @return BLE_ERROR_NONE on success.
rgrover1	717:11b41f651697	146	*
rgrover1	717:11b41f651697	147	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	148	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	149	* ble.getAddress(...) should be replaced with
rgrover1	717:11b41f651697	150	* ble.gap().getAddress(...).
rgrover1	717:11b41f651697	151	*/
rgrover1	717:11b41f651697	152	ble_error_t getAddress(Gap::AddressType_t *typeP, Gap::Address_t address) {
rgrover1	717:11b41f651697	153	return gap().getAddress(typeP, address);
rgrover1	717:11b41f651697	154	}
rgrover1	717:11b41f651697	155
rgrover1	717:11b41f651697	156	/**
rgrover1	717:11b41f651697	157	* Set the GAP advertising mode to use for this device.
rgrover1	717:11b41f651697	158	*
rgrover1	717:11b41f651697	159	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	160	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	161	* ble.setAdvertisingType(...) should be replaced with
rgrover1	717:11b41f651697	162	* ble.gap().setAdvertisingType(...).
rgrover1	717:11b41f651697	163	*/
rgrover1	717:11b41f651697	164	void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
rgrover1	717:11b41f651697	165	gap().setAdvertisingType(advType);
rgrover1	717:11b41f651697	166	}
rgrover1	717:11b41f651697	167
rgrover1	717:11b41f651697	168	/**
rgrover1	717:11b41f651697	169	* @param[in] interval
rgrover1	717:11b41f651697	170	* Advertising interval in units of milliseconds. Advertising
rgrover1	717:11b41f651697	171	* is disabled if interval is 0. If interval is smaller than
rgrover1	717:11b41f651697	172	* the minimum supported value, then the minimum supported
rgrover1	717:11b41f651697	173	* value is used instead. This minimum value can be discovered
rgrover1	717:11b41f651697	174	* using getMinAdvertisingInterval().
rgrover1	717:11b41f651697	175	*
rgrover1	717:11b41f651697	176	* This field must be set to 0 if connectionMode is equal
rgrover1	717:11b41f651697	177	* to ADV_CONNECTABLE_DIRECTED.
rgrover1	717:11b41f651697	178	*
rgrover1	717:11b41f651697	179	* @note: Decreasing this value will allow central devices to detect a
rgrover1	717:11b41f651697	180	* peripheral faster at the expense of more power being used by the radio
rgrover1	717:11b41f651697	181	* due to the higher data transmit rate.
rgrover1	717:11b41f651697	182	*
rgrover1	717:11b41f651697	183	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	184	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	185	* ble.setAdvertisingInterval(...) should be replaced with
rgrover1	717:11b41f651697	186	* ble.gap().setAdvertisingInterval(...).
rgrover1	717:11b41f651697	187	*
rgrover1	717:11b41f651697	188	* @note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1	717:11b41f651697	189	* 'interval' argument. That required an explicit conversion from
rgrover1	717:11b41f651697	190	* milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1	717:11b41f651697	191	* no longer required as the new units are milliseconds. Any application
rgrover1	717:11b41f651697	192	* code depending on the old semantics would need to be updated accordingly.
rgrover1	717:11b41f651697	193	*/
rgrover1	717:11b41f651697	194	void setAdvertisingInterval(uint16_t interval) {
rgrover1	717:11b41f651697	195	gap().setAdvertisingInterval(interval);
rgrover1	717:11b41f651697	196	}
rgrover1	717:11b41f651697	197
rgrover1	717:11b41f651697	198	/**
rgrover1	717:11b41f651697	199	* @return Minimum Advertising interval in milliseconds.
rgrover1	717:11b41f651697	200	*
rgrover1	717:11b41f651697	201	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	202	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	203	* ble.getMinAdvertisingInterval(...) should be replaced with
rgrover1	717:11b41f651697	204	* ble.gap().getMinAdvertisingInterval(...).
rgrover1	717:11b41f651697	205	*/
rgrover1	717:11b41f651697	206	uint16_t getMinAdvertisingInterval(void) const {
rgrover1	717:11b41f651697	207	return gap().getMinAdvertisingInterval();
rgrover1	717:11b41f651697	208	}
rgrover1	717:11b41f651697	209
rgrover1	717:11b41f651697	210	/**
rgrover1	717:11b41f651697	211	* @return Minimum Advertising interval in milliseconds for non-connectible mode.
rgrover1	717:11b41f651697	212	*
rgrover1	717:11b41f651697	213	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	214	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	215	* ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
rgrover1	717:11b41f651697	216	* ble.gap().getMinNonConnectableAdvertisingInterval(...).
rgrover1	717:11b41f651697	217	*/
rgrover1	717:11b41f651697	218	uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1	717:11b41f651697	219	return gap().getMinNonConnectableAdvertisingInterval();
rgrover1	717:11b41f651697	220	}
rgrover1	717:11b41f651697	221
rgrover1	717:11b41f651697	222	/**
rgrover1	717:11b41f651697	223	* @return Maximum Advertising interval in milliseconds.
rgrover1	717:11b41f651697	224	*
rgrover1	717:11b41f651697	225	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	226	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	227	* ble.getMaxAdvertisingInterval(...) should be replaced with
rgrover1	717:11b41f651697	228	* ble.gap().getMaxAdvertisingInterval(...).
rgrover1	717:11b41f651697	229	*/
rgrover1	717:11b41f651697	230	uint16_t getMaxAdvertisingInterval(void) const {
rgrover1	717:11b41f651697	231	return gap().getMaxAdvertisingInterval();
rgrover1	717:11b41f651697	232	}
rgrover1	717:11b41f651697	233
rgrover1	717:11b41f651697	234	/**
rgrover1	717:11b41f651697	235	* @param[in] timeout
rgrover1	717:11b41f651697	236	* Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1	717:11b41f651697	237	* and 16383). Use 0 to disable the advertising timeout.
rgrover1	717:11b41f651697	238	*
rgrover1	717:11b41f651697	239	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	240	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	241	* ble.setAdvertisingTimeout(...) should be replaced with
rgrover1	717:11b41f651697	242	* ble.gap().setAdvertisingTimeout(...).
rgrover1	717:11b41f651697	243	*/
rgrover1	717:11b41f651697	244	void setAdvertisingTimeout(uint16_t timeout) {
rgrover1	717:11b41f651697	245	gap().setAdvertisingTimeout(timeout);
rgrover1	717:11b41f651697	246	}
rgrover1	717:11b41f651697	247
rgrover1	717:11b41f651697	248	/**
rgrover1	717:11b41f651697	249	* Setup a particular, user-constructed set of advertisement parameters for
rgrover1	717:11b41f651697	250	* the underlying stack. It would be uncommon for this API to be used
rgrover1	717:11b41f651697	251	* directly; there are other APIs to tweak advertisement parameters
rgrover1	717:11b41f651697	252	* individually (see above).
rgrover1	717:11b41f651697	253	*
rgrover1	717:11b41f651697	254	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	255	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	256	* ble.setAdvertisingParams(...) should be replaced with
rgrover1	717:11b41f651697	257	* ble.gap().setAdvertisingParams(...).
rgrover1	717:11b41f651697	258	*/
rgrover1	717:11b41f651697	259	void setAdvertisingParams(const GapAdvertisingParams &advParams) {
rgrover1	717:11b41f651697	260	gap().setAdvertisingParams(advParams);
rgrover1	717:11b41f651697	261	}
rgrover1	717:11b41f651697	262
rgrover1	717:11b41f651697	263	/**
rgrover1	717:11b41f651697	264	* @return Read back advertising parameters. Useful for storing and
rgrover1	717:11b41f651697	265	* restoring parameters rapidly.
rgrover1	717:11b41f651697	266	*
rgrover1	717:11b41f651697	267	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	268	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	269	* ble.getAdvertisingParams(...) should be replaced with
rgrover1	717:11b41f651697	270	* ble.gap().getAdvertisingParams(...).
rgrover1	717:11b41f651697	271	*/
rgrover1	717:11b41f651697	272	const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1	717:11b41f651697	273	return gap().getAdvertisingParams();
rgrover1	717:11b41f651697	274	}
rgrover1	717:11b41f651697	275
rgrover1	717:11b41f651697	276	/**
rgrover1	717:11b41f651697	277	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	717:11b41f651697	278	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	717:11b41f651697	279	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	717:11b41f651697	280	* small.
rgrover1	717:11b41f651697	281	*
rgrover1	717:11b41f651697	282	* @param[in] flags
rgrover1	717:11b41f651697	283	* The flags to be added. Please refer to
rgrover1	717:11b41f651697	284	* GapAdvertisingData::Flags for valid flags. Multiple
rgrover1	717:11b41f651697	285	* flags may be specified in combination.
rgrover1	717:11b41f651697	286	*
rgrover1	717:11b41f651697	287	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	288	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	289	* ble.accumulateAdvertisingPayload(flags) should be replaced with
rgrover1	717:11b41f651697	290	* ble.gap().accumulateAdvertisingPayload(flags).
rgrover1	717:11b41f651697	291	*/
rgrover1	717:11b41f651697	292	ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1	717:11b41f651697	293	return gap().accumulateAdvertisingPayload(flags);
rgrover1	717:11b41f651697	294	}
rgrover1	717:11b41f651697	295
rgrover1	717:11b41f651697	296	/**
rgrover1	717:11b41f651697	297	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	717:11b41f651697	298	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	717:11b41f651697	299	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	717:11b41f651697	300	* small.
rgrover1	717:11b41f651697	301	*
rgrover1	717:11b41f651697	302	* @param[in] app
rgrover1	717:11b41f651697	303	* The appearance of the peripheral.
rgrover1	717:11b41f651697	304	*
rgrover1	717:11b41f651697	305	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	306	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	307	* ble.accumulateAdvertisingPayload(appearance) should be replaced with
rgrover1	717:11b41f651697	308	* ble.gap().accumulateAdvertisingPayload(appearance).
rgrover1	717:11b41f651697	309	*/
rgrover1	717:11b41f651697	310	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1	717:11b41f651697	311	return gap().accumulateAdvertisingPayload(app);
rgrover1	717:11b41f651697	312	}
rgrover1	717:11b41f651697	313
rgrover1	717:11b41f651697	314	/**
rgrover1	717:11b41f651697	315	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	717:11b41f651697	316	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	717:11b41f651697	317	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	717:11b41f651697	318	* small.
rgrover1	717:11b41f651697	319	*
rgrover1	717:11b41f651697	320	* @param[in] app
rgrover1	717:11b41f651697	321	* The max transmit power to be used by the controller. This
rgrover1	717:11b41f651697	322	* is only a hint.
rgrover1	717:11b41f651697	323	*
rgrover1	717:11b41f651697	324	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	325	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	326	* ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
rgrover1	717:11b41f651697	327	* ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
rgrover1	717:11b41f651697	328	*/
rgrover1	717:11b41f651697	329	ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1	717:11b41f651697	330	return gap().accumulateAdvertisingPayloadTxPower(power);
rgrover1	717:11b41f651697	331	}
rgrover1	717:11b41f651697	332
rgrover1	717:11b41f651697	333	/**
rgrover1	717:11b41f651697	334	* Accumulate a variable length byte-stream as an AD structure in the
rgrover1	717:11b41f651697	335	* advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1	717:11b41f651697	336	* The SCAN_RESPONSE message may be used as an additional 31 bytes if the
rgrover1	717:11b41f651697	337	* advertising payload proves to be too small.
rgrover1	717:11b41f651697	338	*
rgrover1	717:11b41f651697	339	* @param type The type which describes the variable length data.
rgrover1	717:11b41f651697	340	* @param data data bytes.
rgrover1	717:11b41f651697	341	* @param len length of data.
rgrover1	717:11b41f651697	342	*
rgrover1	717:11b41f651697	343	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	344	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	345	* ble.accumulateAdvertisingPayload(...) should be replaced with
rgrover1	717:11b41f651697	346	* ble.gap().accumulateAdvertisingPayload(...).
rgrover1	717:11b41f651697	347	*/
rgrover1	717:11b41f651697	348	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1	717:11b41f651697	349	return gap().accumulateAdvertisingPayload(type, data, len);
rgrover1	717:11b41f651697	350	}
rgrover1	717:11b41f651697	351
rgrover1	717:11b41f651697	352	/**
rgrover1	717:11b41f651697	353	* Setup a particular, user-constructed advertisement payload for the
rgrover1	717:11b41f651697	354	* underlying stack. It would be uncommon for this API to be used directly;
rgrover1	717:11b41f651697	355	* there are other APIs to build an advertisement payload (see above).
rgrover1	717:11b41f651697	356	*
rgrover1	717:11b41f651697	357	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	358	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	359	* ble.setAdvertisingData(...) should be replaced with
rgrover1	717:11b41f651697	360	* ble.gap().setAdvertisingPayload(...).
rgrover1	717:11b41f651697	361	*/
rgrover1	717:11b41f651697	362	ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
rgrover1	717:11b41f651697	363	return gap().setAdvertisingPayload(advData);
rgrover1	717:11b41f651697	364	}
rgrover1	717:11b41f651697	365
rgrover1	717:11b41f651697	366	/**
rgrover1	717:11b41f651697	367	* @return Read back advertising data. Useful for storing and
rgrover1	717:11b41f651697	368	* restoring payload.
rgrover1	717:11b41f651697	369	*
rgrover1	717:11b41f651697	370	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	371	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	372	* ble.getAdvertisingData(...) should be replaced with
rgrover1	717:11b41f651697	373	* ble.gap().getAdvertisingPayload()(...).
rgrover1	717:11b41f651697	374	*/
rgrover1	717:11b41f651697	375	const GapAdvertisingData &getAdvertisingData(void) const {
rgrover1	717:11b41f651697	376	return gap().getAdvertisingPayload();
rgrover1	717:11b41f651697	377	}
rgrover1	717:11b41f651697	378
rgrover1	717:11b41f651697	379	/**
rgrover1	717:11b41f651697	380	* Reset any advertising payload prepared from prior calls to
rgrover1	717:11b41f651697	381	* accumulateAdvertisingPayload(). This automatically propagates the re-
rgrover1	717:11b41f651697	382	* initialized adv payload to the underlying stack.
rgrover1	717:11b41f651697	383	*
rgrover1	717:11b41f651697	384	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	385	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	386	* ble.clearAdvertisingPayload(...) should be replaced with
rgrover1	717:11b41f651697	387	* ble.gap().clearAdvertisingPayload(...).
rgrover1	717:11b41f651697	388	*/
rgrover1	717:11b41f651697	389	void clearAdvertisingPayload(void) {
rgrover1	717:11b41f651697	390	gap().clearAdvertisingPayload();
rgrover1	717:11b41f651697	391	}
rgrover1	717:11b41f651697	392
rgrover1	717:11b41f651697	393	/**
rgrover1	717:11b41f651697	394	* This API is deprecated and resolves to a no-operation. It is left here
rgrover1	717:11b41f651697	395	* to allow older code to compile. Please avoid using this API in new code.
rgrover1	717:11b41f651697	396	* This API will be dropped in a future release.
rgrover1	717:11b41f651697	397	*
rgrover1	717:11b41f651697	398	* Formerly, it would be used to dynamically reset the accumulated advertising
rgrover1	717:11b41f651697	399	* payload and scanResponse; to do this, the application would clear and re-
rgrover1	717:11b41f651697	400	* accumulate a new advertising payload (and scanResponse) before using this
rgrover1	717:11b41f651697	401	* API. Updates to the underlying advertisement payload now happen
rgrover1	717:11b41f651697	402	* implicitly.
rgrover1	717:11b41f651697	403	*/
rgrover1	717:11b41f651697	404	ble_error_t setAdvertisingPayload(void) {
rgrover1	717:11b41f651697	405	return BLE_ERROR_NONE;
rgrover1	717:11b41f651697	406	}
rgrover1	717:11b41f651697	407
rgrover1	717:11b41f651697	408	/**
rgrover1	717:11b41f651697	409	* Accumulate a variable length byte-stream as an AD structure in the
rgrover1	717:11b41f651697	410	* scanResponse payload.
rgrover1	717:11b41f651697	411	*
rgrover1	717:11b41f651697	412	* @param[in] type The type which describes the variable length data.
rgrover1	717:11b41f651697	413	* @param[in] data data bytes.
rgrover1	717:11b41f651697	414	* @param[in] len length of data.
rgrover1	717:11b41f651697	415	*
rgrover1	717:11b41f651697	416	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	417	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	418	* ble.accumulateScanResponse(...) should be replaced with
rgrover1	717:11b41f651697	419	* ble.gap().accumulateScanResponse(...).
rgrover1	717:11b41f651697	420	*/
rgrover1	717:11b41f651697	421	ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1	717:11b41f651697	422	return gap().accumulateScanResponse(type, data, len);
rgrover1	717:11b41f651697	423	}
rgrover1	717:11b41f651697	424
rgrover1	717:11b41f651697	425	/**
rgrover1	717:11b41f651697	426	* Reset any scan response prepared from prior calls to
rgrover1	717:11b41f651697	427	* accumulateScanResponse().
rgrover1	717:11b41f651697	428	*
rgrover1	717:11b41f651697	429	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	430	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	431	* ble.clearScanResponse(...) should be replaced with
rgrover1	717:11b41f651697	432	* ble.gap().clearScanResponse(...).
rgrover1	717:11b41f651697	433	*/
rgrover1	717:11b41f651697	434	void clearScanResponse(void) {
rgrover1	717:11b41f651697	435	gap().clearScanResponse();
rgrover1	717:11b41f651697	436	}
rgrover1	717:11b41f651697	437
rgrover1	717:11b41f651697	438	/**
rgrover1	717:11b41f651697	439	* Start advertising.
rgrover1	717:11b41f651697	440	*
rgrover1	717:11b41f651697	441	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	442	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	443	* ble.startAdvertising(...) should be replaced with
rgrover1	717:11b41f651697	444	* ble.gap().startAdvertising(...).
rgrover1	717:11b41f651697	445	*/
rgrover1	717:11b41f651697	446	ble_error_t startAdvertising(void) {
rgrover1	717:11b41f651697	447	return gap().startAdvertising();
rgrover1	717:11b41f651697	448	}
rgrover1	717:11b41f651697	449
rgrover1	717:11b41f651697	450	/**
rgrover1	717:11b41f651697	451	* Stop advertising.
rgrover1	717:11b41f651697	452	*
rgrover1	717:11b41f651697	453	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	454	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	455	* ble.stopAdvertising(...) should be replaced with
rgrover1	717:11b41f651697	456	* ble.gap().stopAdvertising(...).
rgrover1	717:11b41f651697	457	*/
rgrover1	717:11b41f651697	458	ble_error_t stopAdvertising(void) {
rgrover1	717:11b41f651697	459	return gap().stopAdvertising();
rgrover1	717:11b41f651697	460	}
rgrover1	717:11b41f651697	461
rgrover1	717:11b41f651697	462	/**
rgrover1	717:11b41f651697	463	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	717:11b41f651697	464	* @param[in] interval
rgrover1	717:11b41f651697	465	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	717:11b41f651697	466	* @param[in] window
rgrover1	717:11b41f651697	467	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	717:11b41f651697	468	* @param[in] timeout
rgrover1	717:11b41f651697	469	* Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1	717:11b41f651697	470	* @param[in] activeScanning
rgrover1	717:11b41f651697	471	* Set to True if active-scanning is required. This is used to fetch the
rgrover1	717:11b41f651697	472	* scan response from a peer if possible.
rgrover1	717:11b41f651697	473	*
rgrover1	717:11b41f651697	474	* The scanning window divided by the interval determines the duty cycle for
rgrover1	717:11b41f651697	475	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	717:11b41f651697	476	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	717:11b41f651697	477	* to have the interval and window set to the same value. In this case,
rgrover1	717:11b41f651697	478	* scanning is continuous, with a change of scanning frequency once every
rgrover1	717:11b41f651697	479	* interval.
rgrover1	717:11b41f651697	480	*
rgrover1	717:11b41f651697	481	* Once the scanning parameters have been configured, scanning can be
rgrover1	717:11b41f651697	482	* enabled by using startScan().
rgrover1	717:11b41f651697	483	*
rgrover1	717:11b41f651697	484	* @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1	717:11b41f651697	485	*
rgrover1	717:11b41f651697	486	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	487	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	488	* ble.setScanParams(...) should be replaced with
rgrover1	717:11b41f651697	489	* ble.gap().setScanParams(...).
rgrover1	717:11b41f651697	490	*/
rgrover1	717:11b41f651697	491	ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1	717:11b41f651697	492	uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1	717:11b41f651697	493	uint16_t timeout = 0,
rgrover1	717:11b41f651697	494	bool activeScanning = false) {
rgrover1	717:11b41f651697	495	return gap().setScanParams(interval, window, timeout, activeScanning);
rgrover1	717:11b41f651697	496	}
rgrover1	717:11b41f651697	497
rgrover1	717:11b41f651697	498	/**
rgrover1	717:11b41f651697	499	* Setup the scanInterval parameter for GAP scanning--i.e. observer mode.
rgrover1	717:11b41f651697	500	* @param[in] interval
rgrover1	717:11b41f651697	501	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	717:11b41f651697	502	*
rgrover1	717:11b41f651697	503	* The scanning window divided by the interval determines the duty cycle for
rgrover1	717:11b41f651697	504	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	717:11b41f651697	505	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	717:11b41f651697	506	* to have the interval and window set to the same value. In this case,
rgrover1	717:11b41f651697	507	* scanning is continuous, with a change of scanning frequency once every
rgrover1	717:11b41f651697	508	* interval.
rgrover1	717:11b41f651697	509	*
rgrover1	717:11b41f651697	510	* Once the scanning parameters have been configured, scanning can be
rgrover1	717:11b41f651697	511	* enabled by using startScan().
rgrover1	717:11b41f651697	512	*
rgrover1	717:11b41f651697	513	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	514	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	515	* ble.setScanInterval(interval) should be replaced with
rgrover1	717:11b41f651697	516	* ble.gap().setScanInterval(interval).
rgrover1	717:11b41f651697	517	*/
rgrover1	717:11b41f651697	518	ble_error_t setScanInterval(uint16_t interval) {
rgrover1	717:11b41f651697	519	return gap().setScanInterval(interval);
rgrover1	717:11b41f651697	520	}
rgrover1	717:11b41f651697	521
rgrover1	717:11b41f651697	522	/**
rgrover1	717:11b41f651697	523	* Setup the scanWindow parameter for GAP scanning--i.e. observer mode.
rgrover1	717:11b41f651697	524	* @param[in] window
rgrover1	717:11b41f651697	525	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	717:11b41f651697	526	*
rgrover1	717:11b41f651697	527	* The scanning window divided by the interval determines the duty cycle for
rgrover1	717:11b41f651697	528	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	717:11b41f651697	529	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	717:11b41f651697	530	* to have the interval and window set to the same value. In this case,
rgrover1	717:11b41f651697	531	* scanning is continuous, with a change of scanning frequency once every
rgrover1	717:11b41f651697	532	* interval.
rgrover1	717:11b41f651697	533	*
rgrover1	717:11b41f651697	534	* Once the scanning parameters have been configured, scanning can be
rgrover1	717:11b41f651697	535	* enabled by using startScan().
rgrover1	717:11b41f651697	536	*
rgrover1	717:11b41f651697	537	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	538	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	539	* ble.setScanWindow(window) should be replaced with
rgrover1	717:11b41f651697	540	* ble.gap().setScanWindow(window).
rgrover1	717:11b41f651697	541	*/
rgrover1	717:11b41f651697	542	ble_error_t setScanWindow(uint16_t window) {
rgrover1	717:11b41f651697	543	return gap().setScanWindow(window);
rgrover1	717:11b41f651697	544	}
rgrover1	717:11b41f651697	545
rgrover1	717:11b41f651697	546	/**
rgrover1	717:11b41f651697	547	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	717:11b41f651697	548	* @param[in] timeout
rgrover1	717:11b41f651697	549	* Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1	717:11b41f651697	550	*
rgrover1	717:11b41f651697	551	* The scanning window divided by the interval determines the duty cycle for
rgrover1	717:11b41f651697	552	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	717:11b41f651697	553	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	717:11b41f651697	554	* to have the interval and window set to the same value. In this case,
rgrover1	717:11b41f651697	555	* scanning is continuous, with a change of scanning frequency once every
rgrover1	717:11b41f651697	556	* interval.
rgrover1	717:11b41f651697	557	*
rgrover1	717:11b41f651697	558	* Once the scanning parameters have been configured, scanning can be
rgrover1	717:11b41f651697	559	* enabled by using startScan().
rgrover1	717:11b41f651697	560	*
rgrover1	717:11b41f651697	561	* @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1	717:11b41f651697	562	*
rgrover1	717:11b41f651697	563	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	564	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	565	* ble.setScanTimeout(...) should be replaced with
rgrover1	717:11b41f651697	566	* ble.gap().setScanTimeout(...).
rgrover1	717:11b41f651697	567	*/
rgrover1	717:11b41f651697	568	ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1	717:11b41f651697	569	return gap().setScanTimeout(timeout);
rgrover1	717:11b41f651697	570	}
rgrover1	717:11b41f651697	571
rgrover1	717:11b41f651697	572	/**
rgrover1	717:11b41f651697	573	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	717:11b41f651697	574	* @param[in] activeScanning
rgrover1	717:11b41f651697	575	* Set to True if active-scanning is required. This is used to fetch the
rgrover1	717:11b41f651697	576	* scan response from a peer if possible.
rgrover1	717:11b41f651697	577	*
rgrover1	717:11b41f651697	578	* Once the scanning parameters have been configured, scanning can be
rgrover1	717:11b41f651697	579	* enabled by using startScan().
rgrover1	717:11b41f651697	580	*
rgrover1	717:11b41f651697	581	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	582	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	583	* ble.setActiveScan(...) should be replaced with
rgrover1	717:11b41f651697	584	* ble.gap().setActiveScanning(...).
rgrover1	717:11b41f651697	585	*/
rgrover1	717:11b41f651697	586	void setActiveScan(bool activeScanning) {
rgrover1	717:11b41f651697	587	gap().setActiveScanning(activeScanning);
rgrover1	717:11b41f651697	588	}
rgrover1	717:11b41f651697	589
rgrover1	717:11b41f651697	590	/**
rgrover1	717:11b41f651697	591	* Start scanning (Observer Procedure) based on the parameters currently in
rgrover1	717:11b41f651697	592	* effect.
rgrover1	717:11b41f651697	593	*
rgrover1	717:11b41f651697	594	* @param[in] callback
rgrover1	717:11b41f651697	595	* The application specific callback to be invoked upon
rgrover1	717:11b41f651697	596	* receiving every advertisement report. This can be passed in
rgrover1	717:11b41f651697	597	* as NULL, in which case scanning may not be enabled at all.
rgrover1	717:11b41f651697	598	*
rgrover1	717:11b41f651697	599	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	600	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	601	* ble.startScan(callback) should be replaced with
rgrover1	717:11b41f651697	602	* ble.gap().startScan(callback).
rgrover1	717:11b41f651697	603	*/
rgrover1	717:11b41f651697	604	ble_error_t startScan(void (callback)(const Gap::AdvertisementCallbackParams_t params)) {
rgrover1	717:11b41f651697	605	return gap().startScan(callback);
rgrover1	717:11b41f651697	606	}
rgrover1	717:11b41f651697	607
rgrover1	717:11b41f651697	608	/**
rgrover1	717:11b41f651697	609	* Same as above, but this takes an (object, method) pair for a callback.
rgrover1	717:11b41f651697	610	*
rgrover1	717:11b41f651697	611	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	612	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	613	* ble.startScan(callback) should be replaced with
rgrover1	717:11b41f651697	614	* ble.gap().startScan(object, callback).
rgrover1	717:11b41f651697	615	*/
rgrover1	717:11b41f651697	616	template<typename T>
rgrover1	717:11b41f651697	617	ble_error_t startScan(T object, void (T::memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
rgrover1	717:11b41f651697	618
rgrover1	717:11b41f651697	619	/**
rgrover1	717:11b41f651697	620	* Stop scanning. The current scanning parameters remain in effect.
rgrover1	717:11b41f651697	621	*
rgrover1	717:11b41f651697	622	* @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1	717:11b41f651697	623	*
rgrover1	717:11b41f651697	624	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	625	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	626	* ble.stopScan() should be replaced with
rgrover1	717:11b41f651697	627	* ble.gap().stopScan().
rgrover1	717:11b41f651697	628	*/
rgrover1	717:11b41f651697	629	ble_error_t stopScan(void) {
rgrover1	717:11b41f651697	630	return gap().stopScan();
rgrover1	717:11b41f651697	631	}
rgrover1	717:11b41f651697	632
rgrover1	717:11b41f651697	633	/**
rgrover1	717:11b41f651697	634	* Create a connection (GAP Link Establishment).
rgrover1	717:11b41f651697	635	* @param peerAddr
rgrover1	717:11b41f651697	636	* 48-bit address, LSB format.
rgrover1	717:11b41f651697	637	* @param peerAddrType
rgrover1	717:11b41f651697	638	* Address type of the peer.
rgrover1	717:11b41f651697	639	* @param connectionParams
rgrover1	717:11b41f651697	640	* Connection parameters.
rgrover1	717:11b41f651697	641	* @param scanParams
rgrover1	717:11b41f651697	642	* Paramters to be used while scanning for the peer.
rgrover1	717:11b41f651697	643	* @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1	717:11b41f651697	644	* successfully. The onConnection callback (if set) will be invoked upon
rgrover1	717:11b41f651697	645	* a connection event.
rgrover1	717:11b41f651697	646	*
rgrover1	717:11b41f651697	647	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	648	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	649	* ble.connect(...) should be replaced with
rgrover1	717:11b41f651697	650	* ble.gap().connect(...).
rgrover1	717:11b41f651697	651	*/
rgrover1	717:11b41f651697	652	ble_error_t connect(const Gap::Address_t peerAddr,
rgrover1	717:11b41f651697	653	Gap::AddressType_t peerAddrType = Gap::ADDR_TYPE_RANDOM_STATIC,
rgrover1	717:11b41f651697	654	const Gap::ConnectionParams_t *connectionParams = NULL,
rgrover1	717:11b41f651697	655	const GapScanningParams *scanParams = NULL) {
rgrover1	717:11b41f651697	656	return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
rgrover1	717:11b41f651697	657	}
rgrover1	717:11b41f651697	658
rgrover1	717:11b41f651697	659	/**
rgrover1	717:11b41f651697	660	* This call initiates the disconnection procedure, and its completion will
rgrover1	717:11b41f651697	661	* be communicated to the application with an invocation of the
rgrover1	717:11b41f651697	662	* onDisconnection callback.
rgrover1	717:11b41f651697	663	*
rgrover1	717:11b41f651697	664	* @param[in] connectionHandle
rgrover1	717:11b41f651697	665	* @param[in] reason
rgrover1	717:11b41f651697	666	* The reason for disconnection to be sent back to the peer.
rgrover1	717:11b41f651697	667	*/
rgrover1	717:11b41f651697	668	ble_error_t disconnect(Gap::Handle_t connectionHandle, Gap::DisconnectionReason_t reason) {
rgrover1	717:11b41f651697	669	return gap().disconnect(connectionHandle, reason);
rgrover1	717:11b41f651697	670	}
rgrover1	717:11b41f651697	671
rgrover1	717:11b41f651697	672	/**
rgrover1	717:11b41f651697	673	* This call initiates the disconnection procedure, and its completion will
rgrover1	717:11b41f651697	674	* be communicated to the application with an invocation of the
rgrover1	717:11b41f651697	675	* onDisconnection callback.
rgrover1	717:11b41f651697	676	*
rgrover1	717:11b41f651697	677	* @param reason
rgrover1	717:11b41f651697	678	* The reason for disconnection to be sent back to the peer.
rgrover1	717:11b41f651697	679	*
rgrover1	717:11b41f651697	680	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	681	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	682	* ble.disconnect(reason) should be replaced with
rgrover1	717:11b41f651697	683	* ble.gap().disconnect(reason).
rgrover1	717:11b41f651697	684	*
rgrover1	717:11b41f651697	685	* @note: this version of disconnect() doesn't take a connection handle. It
rgrover1	717:11b41f651697	686	* will work reliably only for stacks which are limited to a single
rgrover1	717:11b41f651697	687	* connection. This API should be considered deprecated in favour of the
rgrover1	717:11b41f651697	688	* alternative which takes a connection handle. It will be dropped in the future.
rgrover1	717:11b41f651697	689	*/
rgrover1	717:11b41f651697	690	ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
rgrover1	717:11b41f651697	691	return gap().disconnect(reason);
rgrover1	717:11b41f651697	692	}
rgrover1	717:11b41f651697	693
rgrover1	717:11b41f651697	694	/**
rgrover1	717:11b41f651697	695	* Returns the current GAP state of the device using a bitmask which
rgrover1	717:11b41f651697	696	* describes whether the device is advertising and/or connected.
rgrover1	717:11b41f651697	697	*
rgrover1	717:11b41f651697	698	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	699	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	700	* ble.getGapState() should be replaced with
rgrover1	717:11b41f651697	701	* ble.gap().getState().
rgrover1	717:11b41f651697	702	*/
rgrover1	717:11b41f651697	703	Gap::GapState_t getGapState(void) const {
rgrover1	717:11b41f651697	704	return gap().getState();
rgrover1	717:11b41f651697	705	}
rgrover1	717:11b41f651697	706
rgrover1	717:11b41f651697	707	/**
rgrover1	717:11b41f651697	708	* Get the GAP peripheral preferred connection parameters. These are the
rgrover1	717:11b41f651697	709	* defaults that the peripheral would like to have in a connection. The
rgrover1	717:11b41f651697	710	* choice of the connection parameters is eventually up to the central.
rgrover1	717:11b41f651697	711	*
rgrover1	717:11b41f651697	712	* @param[out] params
rgrover1	717:11b41f651697	713	* The structure where the parameters will be stored. Memory
rgrover1	717:11b41f651697	714	* for this is owned by the caller.
rgrover1	717:11b41f651697	715	*
rgrover1	717:11b41f651697	716	* @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1	717:11b41f651697	717	* the given structure pointed to by params.
rgrover1	717:11b41f651697	718	*
rgrover1	717:11b41f651697	719	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	720	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	721	* ble.getPreferredConnectionParams() should be replaced with
rgrover1	717:11b41f651697	722	* ble.gap().getPreferredConnectionParams().
rgrover1	717:11b41f651697	723	*/
rgrover1	717:11b41f651697	724	ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
rgrover1	717:11b41f651697	725	return gap().getPreferredConnectionParams(params);
rgrover1	717:11b41f651697	726	}
rgrover1	717:11b41f651697	727
rgrover1	717:11b41f651697	728	/**
rgrover1	717:11b41f651697	729	* Set the GAP peripheral preferred connection parameters. These are the
rgrover1	717:11b41f651697	730	* defaults that the peripheral would like to have in a connection. The
rgrover1	717:11b41f651697	731	* choice of the connection parameters is eventually up to the central.
rgrover1	717:11b41f651697	732	*
rgrover1	717:11b41f651697	733	* @param[in] params
rgrover1	717:11b41f651697	734	* The structure containing the desired parameters.
rgrover1	717:11b41f651697	735	*
rgrover1	717:11b41f651697	736	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	737	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	738	* ble.setPreferredConnectionParams() should be replaced with
rgrover1	717:11b41f651697	739	* ble.gap().setPreferredConnectionParams().
rgrover1	717:11b41f651697	740	*/
rgrover1	717:11b41f651697	741	ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
rgrover1	717:11b41f651697	742	return gap().setPreferredConnectionParams(params);
rgrover1	717:11b41f651697	743	}
rgrover1	717:11b41f651697	744
rgrover1	717:11b41f651697	745	/**
rgrover1	717:11b41f651697	746	* Update connection parameters while in the peripheral role.
rgrover1	717:11b41f651697	747	* @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
rgrover1	717:11b41f651697	748	* the central to perform the procedure.
rgrover1	717:11b41f651697	749	* @param[in] handle
rgrover1	717:11b41f651697	750	* Connection Handle
rgrover1	717:11b41f651697	751	* @param[in] params
rgrover1	717:11b41f651697	752	* Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1	717:11b41f651697	753	* the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1	717:11b41f651697	754	*
rgrover1	717:11b41f651697	755	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	756	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	757	* ble.updateConnectionParams() should be replaced with
rgrover1	717:11b41f651697	758	* ble.gap().updateConnectionParams().
rgrover1	717:11b41f651697	759	*/
rgrover1	717:11b41f651697	760	ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
rgrover1	717:11b41f651697	761	return gap().updateConnectionParams(handle, params);
rgrover1	717:11b41f651697	762	}
rgrover1	717:11b41f651697	763
rgrover1	717:11b41f651697	764	/**
rgrover1	717:11b41f651697	765	* Set the device name characteristic in the GAP service.
rgrover1	717:11b41f651697	766	* @param[in] deviceName
rgrover1	717:11b41f651697	767	* The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1	717:11b41f651697	768	*
rgrover1	717:11b41f651697	769	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	770	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	771	* ble.setDeviceName() should be replaced with
rgrover1	717:11b41f651697	772	* ble.gap().setDeviceName().
rgrover1	717:11b41f651697	773	*/
rgrover1	717:11b41f651697	774	ble_error_t setDeviceName(const uint8_t *deviceName) {
rgrover1	717:11b41f651697	775	return gap().setDeviceName(deviceName);
rgrover1	717:11b41f651697	776	}
rgrover1	717:11b41f651697	777
rgrover1	717:11b41f651697	778	/**
rgrover1	717:11b41f651697	779	* Get the value of the device name characteristic in the GAP service.
rgrover1	717:11b41f651697	780	* @param[out] deviceName
rgrover1	717:11b41f651697	781	* Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1	717:11b41f651697	782	* terminated* string will be placed. Set this
rgrover1	717:11b41f651697	783	* value to NULL in order to obtain the deviceName-length
rgrover1	717:11b41f651697	784	* from the 'length' parameter.
rgrover1	717:11b41f651697	785	*
rgrover1	717:11b41f651697	786	* @param[in/out] lengthP
rgrover1	717:11b41f651697	787	* (on input) Length of the buffer pointed to by deviceName;
rgrover1	717:11b41f651697	788	* (on output) the complete device name length (without the
rgrover1	717:11b41f651697	789	* null terminator).
rgrover1	717:11b41f651697	790	*
rgrover1	717:11b41f651697	791	* @note If the device name is longer than the size of the supplied buffer,
rgrover1	717:11b41f651697	792	* length will return the complete device name length, and not the
rgrover1	717:11b41f651697	793	* number of bytes actually returned in deviceName. The application may
rgrover1	717:11b41f651697	794	* use this information to retry with a suitable buffer size.
rgrover1	717:11b41f651697	795	*
rgrover1	717:11b41f651697	796	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	797	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	798	* ble.getDeviceName() should be replaced with
rgrover1	717:11b41f651697	799	* ble.gap().getDeviceName().
rgrover1	717:11b41f651697	800	*/
rgrover1	717:11b41f651697	801	ble_error_t getDeviceName(uint8_t deviceName, unsigned lengthP) {
rgrover1	717:11b41f651697	802	return gap().getDeviceName(deviceName, lengthP);
rgrover1	717:11b41f651697	803	}
rgrover1	717:11b41f651697	804
rgrover1	717:11b41f651697	805	/**
rgrover1	717:11b41f651697	806	* Set the appearance characteristic in the GAP service.
rgrover1	717:11b41f651697	807	* @param[in] appearance
rgrover1	717:11b41f651697	808	* The new value for the device-appearance.
rgrover1	717:11b41f651697	809	*
rgrover1	717:11b41f651697	810	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	811	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	812	* ble.setAppearance() should be replaced with
rgrover1	717:11b41f651697	813	* ble.gap().setAppearance().
rgrover1	717:11b41f651697	814	*/
rgrover1	717:11b41f651697	815	ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
rgrover1	717:11b41f651697	816	return gap().setAppearance(appearance);
rgrover1	717:11b41f651697	817	}
rgrover1	717:11b41f651697	818
rgrover1	717:11b41f651697	819	/**
rgrover1	717:11b41f651697	820	* Get the appearance characteristic in the GAP service.
rgrover1	717:11b41f651697	821	* @param[out] appearance
rgrover1	717:11b41f651697	822	* The new value for the device-appearance.
rgrover1	717:11b41f651697	823	*
rgrover1	717:11b41f651697	824	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	825	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	826	* ble.getAppearance() should be replaced with
rgrover1	717:11b41f651697	827	* ble.gap().getAppearance().
rgrover1	717:11b41f651697	828	*/
rgrover1	717:11b41f651697	829	ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
rgrover1	717:11b41f651697	830	return gap().getAppearance(appearanceP);
rgrover1	717:11b41f651697	831	}
rgrover1	717:11b41f651697	832
rgrover1	717:11b41f651697	833	/**
rgrover1	717:11b41f651697	834	* Set the radio's transmit power.
rgrover1	717:11b41f651697	835	* @param[in] txPower Radio transmit power in dBm.
rgrover1	717:11b41f651697	836	*
rgrover1	717:11b41f651697	837	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	838	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	839	* ble.setTxPower() should be replaced with
rgrover1	717:11b41f651697	840	* ble.gap().setTxPower().
rgrover1	717:11b41f651697	841	*/
rgrover1	717:11b41f651697	842	ble_error_t setTxPower(int8_t txPower) {
rgrover1	717:11b41f651697	843	return gap().setTxPower(txPower);
rgrover1	717:11b41f651697	844	}
rgrover1	717:11b41f651697	845
rgrover1	717:11b41f651697	846	/**
rgrover1	717:11b41f651697	847	* Query the underlying stack for permitted arguments for setTxPower().
rgrover1	717:11b41f651697	848	*
rgrover1	717:11b41f651697	849	* @param[out] valueArrayPP
rgrover1	717:11b41f651697	850	* Out parameter to receive the immutable array of Tx values.
rgrover1	717:11b41f651697	851	* @param[out] countP
rgrover1	717:11b41f651697	852	* Out parameter to receive the array's size.
rgrover1	717:11b41f651697	853	*
rgrover1	717:11b41f651697	854	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	855	* You should use the parallel API from Gap directly. A former call to
rgrover1	717:11b41f651697	856	* ble.getPermittedTxPowerValues() should be replaced with
rgrover1	717:11b41f651697	857	* ble.gap().getPermittedTxPowerValues().
rgrover1	717:11b41f651697	858	*/
rgrover1	717:11b41f651697	859	void getPermittedTxPowerValues(const int8_t *valueArrayPP, size_t countP) {
rgrover1	717:11b41f651697	860	gap().getPermittedTxPowerValues(valueArrayPP, countP);
rgrover1	717:11b41f651697	861	}
rgrover1	717:11b41f651697	862
rgrover1	717:11b41f651697	863	/**
rgrover1	717:11b41f651697	864	* Add a service declaration to the local server ATT table. Also add the
rgrover1	717:11b41f651697	865	* characteristics contained within.
rgrover1	717:11b41f651697	866	*
rgrover1	717:11b41f651697	867	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	868	* You should use the parallel API from GattServer directly. A former call
rgrover1	717:11b41f651697	869	* to ble.addService() should be replaced with
rgrover1	717:11b41f651697	870	* ble.gattServer().addService().
rgrover1	717:11b41f651697	871	*/
rgrover1	717:11b41f651697	872	ble_error_t addService(GattService &service) {
rgrover1	717:11b41f651697	873	return gattServer().addService(service);
rgrover1	717:11b41f651697	874	}
rgrover1	717:11b41f651697	875
rgrover1	717:11b41f651697	876	/**
rgrover1	717:11b41f651697	877	* Read the value of a characteristic from the local GattServer
rgrover1	717:11b41f651697	878	* @param[in] attributeHandle
rgrover1	717:11b41f651697	879	* Attribute handle for the value attribute of the characteristic.
rgrover1	717:11b41f651697	880	* @param[out] buffer
rgrover1	717:11b41f651697	881	* A buffer to hold the value being read.
rgrover1	717:11b41f651697	882	* @param[in/out] lengthP
rgrover1	717:11b41f651697	883	* Length of the buffer being supplied. If the attribute
rgrover1	717:11b41f651697	884	* value is longer than the size of the supplied buffer,
rgrover1	717:11b41f651697	885	* this variable will hold upon return the total attribute value length
rgrover1	717:11b41f651697	886	* (excluding offset). The application may use this
rgrover1	717:11b41f651697	887	* information to allocate a suitable buffer size.
rgrover1	717:11b41f651697	888	*
rgrover1	717:11b41f651697	889	* @return BLE_ERROR_NONE if a value was read successfully into the buffer.
rgrover1	717:11b41f651697	890	*
rgrover1	717:11b41f651697	891	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	892	* You should use the parallel API from GattServer directly. A former call
rgrover1	717:11b41f651697	893	* to ble.readCharacteristicValue() should be replaced with
rgrover1	717:11b41f651697	894	* ble.gattServer().read().
rgrover1	717:11b41f651697	895	*/
rgrover1	717:11b41f651697	896	ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP) {
rgrover1	717:11b41f651697	897	return gattServer().read(attributeHandle, buffer, lengthP);
rgrover1	717:11b41f651697	898	}
rgrover1	717:11b41f651697	899
rgrover1	717:11b41f651697	900	/**
rgrover1	717:11b41f651697	901	* Read the value of a characteristic from the local GattServer
rgrover1	717:11b41f651697	902	* @param[in] connectionHandle
rgrover1	717:11b41f651697	903	* Connection Handle.
rgrover1	717:11b41f651697	904	* @param[in] attributeHandle
rgrover1	717:11b41f651697	905	* Attribute handle for the value attribute of the characteristic.
rgrover1	717:11b41f651697	906	* @param[out] buffer
rgrover1	717:11b41f651697	907	* A buffer to hold the value being read.
rgrover1	717:11b41f651697	908	* @param[in/out] lengthP
rgrover1	717:11b41f651697	909	* Length of the buffer being supplied. If the attribute
rgrover1	717:11b41f651697	910	* value is longer than the size of the supplied buffer,
rgrover1	717:11b41f651697	911	* this variable will hold upon return the total attribute value length
rgrover1	717:11b41f651697	912	* (excluding offset). The application may use this
rgrover1	717:11b41f651697	913	* information to allocate a suitable buffer size.
rgrover1	717:11b41f651697	914	*
rgrover1	717:11b41f651697	915	* @return BLE_ERROR_NONE if a value was read successfully into the buffer.
rgrover1	717:11b41f651697	916	*
rgrover1	717:11b41f651697	917	* @note This API is a version of above with an additional connection handle
rgrover1	717:11b41f651697	918	* parameter to allow fetches for connection-specific multivalued
rgrover1	734:718a3566b4ce	919	* attributes (such as the CCCDs).
rgrover1	717:11b41f651697	920	*
rgrover1	717:11b41f651697	921	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	922	* You should use the parallel API from GattServer directly. A former call
rgrover1	717:11b41f651697	923	* to ble.readCharacteristicValue() should be replaced with
rgrover1	717:11b41f651697	924	* ble.gattServer().read().
rgrover1	717:11b41f651697	925	*/
rgrover1	717:11b41f651697	926	ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP) {
rgrover1	717:11b41f651697	927	return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
rgrover1	717:11b41f651697	928	}
rgrover1	717:11b41f651697	929
rgrover1	717:11b41f651697	930	/**
rgrover1	717:11b41f651697	931	* Update the value of a characteristic on the local GattServer.
rgrover1	717:11b41f651697	932	*
rgrover1	717:11b41f651697	933	* @param[in] attributeHandle
rgrover1	717:11b41f651697	934	* Handle for the value attribute of the Characteristic.
rgrover1	717:11b41f651697	935	* @param[in] value
rgrover1	717:11b41f651697	936	* A pointer to a buffer holding the new value
rgrover1	717:11b41f651697	937	* @param[in] size
rgrover1	717:11b41f651697	938	* Size of the new value (in bytes).
rgrover1	717:11b41f651697	939	* @param[in] localOnly
rgrover1	717:11b41f651697	940	* Should this update be kept on the local
rgrover1	717:11b41f651697	941	* GattServer regardless of the state of the
rgrover1	717:11b41f651697	942	* notify/indicate flag in the CCCD for this
rgrover1	717:11b41f651697	943	* Characteristic? If set to true, no notification
rgrover1	717:11b41f651697	944	* or indication is generated.
rgrover1	717:11b41f651697	945	*
rgrover1	717:11b41f651697	946	* @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
rgrover1	717:11b41f651697	947	*
rgrover1	717:11b41f651697	948	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	949	* You should use the parallel API from GattServer directly. A former call
rgrover1	717:11b41f651697	950	* to ble.updateCharacteristicValue() should be replaced with
rgrover1	717:11b41f651697	951	* ble.gattServer().write().
rgrover1	717:11b41f651697	952	*/
rgrover1	717:11b41f651697	953	ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
rgrover1	717:11b41f651697	954	const uint8_t *value,
rgrover1	717:11b41f651697	955	uint16_t size,
rgrover1	717:11b41f651697	956	bool localOnly = false) {
rgrover1	717:11b41f651697	957	return gattServer().write(attributeHandle, value, size, localOnly);
rgrover1	717:11b41f651697	958	}
rgrover1	717:11b41f651697	959
rgrover1	717:11b41f651697	960	/**
rgrover1	717:11b41f651697	961	* Update the value of a characteristic on the local GattServer. A version
rgrover1	717:11b41f651697	962	* of the same as above with connection handle parameter to allow updates
rgrover1	734:718a3566b4ce	963	* for connection-specific multivalued attributes (such as the CCCDs).
rgrover1	717:11b41f651697	964	*
rgrover1	717:11b41f651697	965	* @param[in] connectionHandle
rgrover1	717:11b41f651697	966	* Connection Handle.
rgrover1	717:11b41f651697	967	* @param[in] attributeHandle
rgrover1	717:11b41f651697	968	* Handle for the value attribute of the Characteristic.
rgrover1	717:11b41f651697	969	* @param[in] value
rgrover1	717:11b41f651697	970	* A pointer to a buffer holding the new value
rgrover1	717:11b41f651697	971	* @param[in] size
rgrover1	717:11b41f651697	972	* Size of the new value (in bytes).
rgrover1	717:11b41f651697	973	* @param[in] localOnly
rgrover1	717:11b41f651697	974	* Should this update be kept on the local
rgrover1	717:11b41f651697	975	* GattServer regardless of the state of the
rgrover1	717:11b41f651697	976	* notify/indicate flag in the CCCD for this
rgrover1	717:11b41f651697	977	* Characteristic? If set to true, no notification
rgrover1	717:11b41f651697	978	* or indication is generated.
rgrover1	717:11b41f651697	979	*
rgrover1	717:11b41f651697	980	* @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
rgrover1	717:11b41f651697	981	*
rgrover1	717:11b41f651697	982	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	983	* You should use the parallel API from GattServer directly. A former call
rgrover1	717:11b41f651697	984	* to ble.updateCharacteristicValue() should be replaced with
rgrover1	717:11b41f651697	985	* ble.gattServer().write().
rgrover1	717:11b41f651697	986	*/
rgrover1	717:11b41f651697	987	ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
rgrover1	717:11b41f651697	988	GattAttribute::Handle_t attributeHandle,
rgrover1	717:11b41f651697	989	const uint8_t *value,
rgrover1	717:11b41f651697	990	uint16_t size,
rgrover1	717:11b41f651697	991	bool localOnly = false) {
rgrover1	717:11b41f651697	992	return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
rgrover1	717:11b41f651697	993	}
rgrover1	717:11b41f651697	994
rgrover1	717:11b41f651697	995	/**
rgrover1	717:11b41f651697	996	* Enable the BLE stack's Security Manager. The Security Manager implements
rgrover1	717:11b41f651697	997	* the actual cryptographic algorithms and protocol exchanges that allow two
rgrover1	717:11b41f651697	998	* devices to securely exchange data and privately detect each other.
rgrover1	717:11b41f651697	999	* Calling this API is a prerequisite for encryption and pairing (bonding).
rgrover1	717:11b41f651697	1000	*
rgrover1	717:11b41f651697	1001	* @param[in] enableBonding Allow for bonding.
rgrover1	717:11b41f651697	1002	* @param[in] requireMITM Require protection for man-in-the-middle attacks.
rgrover1	717:11b41f651697	1003	* @param[in] iocaps To specify IO capabilities of this peripheral,
rgrover1	717:11b41f651697	1004	* such as availability of a display or keyboard to
rgrover1	717:11b41f651697	1005	* support out-of-band exchanges of security data.
rgrover1	717:11b41f651697	1006	* @param[in] passkey To specify a static passkey.
rgrover1	717:11b41f651697	1007	*
rgrover1	717:11b41f651697	1008	* @return BLE_ERROR_NONE on success.
rgrover1	717:11b41f651697	1009	*
rgrover1	717:11b41f651697	1010	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	1011	* You should use the parallel API from SecurityManager directly. A former
rgrover1	717:11b41f651697	1012	* call to ble.initializeSecurity(...) should be replaced with
rgrover1	717:11b41f651697	1013	* ble.securityManager().init(...).
rgrover1	717:11b41f651697	1014	*/
rgrover1	717:11b41f651697	1015	ble_error_t initializeSecurity(bool enableBonding = true,
rgrover1	717:11b41f651697	1016	bool requireMITM = true,
rgrover1	717:11b41f651697	1017	SecurityManager::SecurityIOCapabilities_t iocaps = SecurityManager::IO_CAPS_NONE,
rgrover1	717:11b41f651697	1018	const SecurityManager::Passkey_t passkey = NULL) {
rgrover1	717:11b41f651697	1019	return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
rgrover1	717:11b41f651697	1020	}
rgrover1	717:11b41f651697	1021
rgrover1	717:11b41f651697	1022	/**
rgrover1	717:11b41f651697	1023	* Get the security status of a connection.
rgrover1	717:11b41f651697	1024	*
rgrover1	717:11b41f651697	1025	* @param[in] connectionHandle Handle to identify the connection.
rgrover1	717:11b41f651697	1026	* @param[out] securityStatusP security status.
rgrover1	717:11b41f651697	1027	*
rgrover1	717:11b41f651697	1028	* @return BLE_SUCCESS Or appropriate error code indicating reason for failure.
rgrover1	717:11b41f651697	1029	*
rgrover1	717:11b41f651697	1030	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	1031	* You should use the parallel API from SecurityManager directly. A former
rgrover1	717:11b41f651697	1032	* call to ble.getLinkSecurity(...) should be replaced with
rgrover1	717:11b41f651697	1033	* ble.securityManager().getLinkSecurity(...).
rgrover1	717:11b41f651697	1034	*/
rgrover1	717:11b41f651697	1035	ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
rgrover1	717:11b41f651697	1036	return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
rgrover1	717:11b41f651697	1037	}
rgrover1	717:11b41f651697	1038
rgrover1	717:11b41f651697	1039	/**
rgrover1	717:11b41f651697	1040	* Delete all peer device context and all related bonding information from
rgrover1	717:11b41f651697	1041	* the database within the security manager.
rgrover1	717:11b41f651697	1042	*
rgrover1	717:11b41f651697	1043	* @retval BLE_ERROR_NONE On success, else an error code indicating reason for failure.
rgrover1	717:11b41f651697	1044	* @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization and/or
rgrover1	717:11b41f651697	1045	* application registration.
rgrover1	717:11b41f651697	1046	*
rgrover1	717:11b41f651697	1047	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	1048	* You should use the parallel API from SecurityManager directly. A former
rgrover1	717:11b41f651697	1049	* call to ble.purgeAllBondingState() should be replaced with
rgrover1	717:11b41f651697	1050	* ble.securityManager().purgeAllBondingState().
rgrover1	717:11b41f651697	1051	*/
rgrover1	717:11b41f651697	1052	ble_error_t purgeAllBondingState(void) {
rgrover1	717:11b41f651697	1053	return securityManager().purgeAllBondingState();
rgrover1	717:11b41f651697	1054	}
rgrover1	717:11b41f651697	1055
rgrover1	717:11b41f651697	1056	/**
rgrover1	717:11b41f651697	1057	* Setup a callback for timeout events. Refer to Gap::TimeoutSource_t for
rgrover1	717:11b41f651697	1058	* possible event types.
rgrover1	717:11b41f651697	1059	*
rgrover1	717:11b41f651697	1060	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	752:868b6dd7a6bf	1061	* You should use the parallel API from Gap directly. A former call
rgrover1	717:11b41f651697	1062	* to ble.onTimeout(callback) should be replaced with
rgrover1	717:11b41f651697	1063	* ble.gap().onTimeout(callback).
rgrover1	717:11b41f651697	1064	*/
rgrover1	717:11b41f651697	1065	void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
rgrover1	717:11b41f651697	1066	gap().onTimeout(timeoutCallback);
rgrover1	717:11b41f651697	1067	}
rgrover1	717:11b41f651697	1068
rgrover1	717:11b41f651697	1069	/**
rgrover1	717:11b41f651697	1070	* Setup a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
rgrover1	717:11b41f651697	1071	*
rgrover1	717:11b41f651697	1072	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	752:868b6dd7a6bf	1073	* You should use the parallel API from Gap directly. A former call
rgrover1	717:11b41f651697	1074	* to ble.onConnection(callback) should be replaced with
rgrover1	717:11b41f651697	1075	* ble.gap().onConnection(callback).
rgrover1	717:11b41f651697	1076	*/
rgrover1	717:11b41f651697	1077	void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
rgrover1	717:11b41f651697	1078	gap().onConnection(connectionCallback);
rgrover1	717:11b41f651697	1079	}
rgrover1	717:11b41f651697	1080
rgrover1	717:11b41f651697	1081	/**
rgrover1	717:11b41f651697	1082	* Used to setup a callback for GAP disconnection.
rgrover1	717:11b41f651697	1083	*
rgrover1	717:11b41f651697	1084	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	752:868b6dd7a6bf	1085	* You should use the parallel API from Gap directly. A former call
rgrover1	717:11b41f651697	1086	* to ble.onDisconnection(callback) should be replaced with
rgrover1	717:11b41f651697	1087	* ble.gap().onDisconnection(callback).
rgrover1	717:11b41f651697	1088	*/
rgrover1	717:11b41f651697	1089	void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
rgrover1	717:11b41f651697	1090	gap().onDisconnection(disconnectionCallback);
rgrover1	717:11b41f651697	1091	}
rgrover1	717:11b41f651697	1092
rgrover1	717:11b41f651697	1093	/**
rgrover1	717:11b41f651697	1094	* Append to a chain of callbacks to be invoked upon disconnection; these
rgrover1	717:11b41f651697	1095	* callbacks receive no context and are therefore different from the
rgrover1	717:11b41f651697	1096	* onDisconnection callback.
rgrover1	717:11b41f651697	1097	*
rgrover1	717:11b41f651697	1098	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	752:868b6dd7a6bf	1099	* You should use the parallel API from Gap directly. A former call
rgrover1	717:11b41f651697	1100	* to ble.addToDisconnectionCallchain(...) should be replaced with
rgrover1	717:11b41f651697	1101	* ble.gap().addToDisconnectionCallchain(...).
rgrover1	717:11b41f651697	1102	*/
rgrover1	717:11b41f651697	1103	template<typename T>
rgrover1	717:11b41f651697	1104	void addToDisconnectionCallChain(T tptr, void (T::mptr)(void)) {
rgrover1	717:11b41f651697	1105	gap().addToDisconnectionCallChain(tptr, mptr);
rgrover1	717:11b41f651697	1106	}
rgrover1	717:11b41f651697	1107
rgrover1	717:11b41f651697	1108	/**
rgrover1	717:11b41f651697	1109	* Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1	717:11b41f651697	1110	* (nACTIVE) signals from the stack that notify the application when the
rgrover1	717:11b41f651697	1111	* radio is in use. The signal is sent using software interrupt.
rgrover1	717:11b41f651697	1112	*
rgrover1	717:11b41f651697	1113	* The ACTIVE signal is sent before the Radio Event starts. The nACTIVE
rgrover1	717:11b41f651697	1114	* signal is sent at the end of the Radio Event. These signals can be used
rgrover1	717:11b41f651697	1115	* by the application programmer to synchronize application logic with radio
rgrover1	717:11b41f651697	1116	* activity. For example, the ACTIVE signal can be used to shut off external
rgrover1	717:11b41f651697	1117	* devices to manage peak current drawn during periods when the radio is on,
rgrover1	717:11b41f651697	1118	* or to trigger sensor data collection for transmission in the Radio Event.
rgrover1	717:11b41f651697	1119	*
rgrover1	717:11b41f651697	1120	* @param callback
rgrover1	717:11b41f651697	1121	* The application handler to be invoked in response to a radio
rgrover1	717:11b41f651697	1122	* ACTIVE/INACTIVE event.
rgrover1	717:11b41f651697	1123	*
rgrover1	717:11b41f651697	1124	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	752:868b6dd7a6bf	1125	* You should use the parallel API from Gap directly. A former call
rgrover1	717:11b41f651697	1126	* to ble.onRadioNotification(...) should be replaced with
rgrover1	717:11b41f651697	1127	* ble.gap().onRadioNotification(...).
rgrover1	717:11b41f651697	1128	*/
rgrover1	753:424c2ae44553	1129	void onRadioNotification(void (*callback)(bool)) {
rgrover1	717:11b41f651697	1130	gap().onRadioNotification(callback);
rgrover1	717:11b41f651697	1131	}
rgrover1	717:11b41f651697	1132
rgrover1	717:11b41f651697	1133	/**
rgrover1	717:11b41f651697	1134	* Add a callback for the GATT event DATA_SENT (which is triggered when
rgrover1	717:11b41f651697	1135	* updates are sent out by GATT in the form of notifications).
rgrover1	717:11b41f651697	1136	*
rgrover1	717:11b41f651697	1137	* @Note: it is possible to chain together multiple onDataSent callbacks
rgrover1	717:11b41f651697	1138	* (potentially from different modules of an application) to receive updates
rgrover1	717:11b41f651697	1139	* to characteristics.
rgrover1	717:11b41f651697	1140	*
rgrover1	717:11b41f651697	1141	* @Note: it is also possible to setup a callback into a member function of
rgrover1	717:11b41f651697	1142	* some object.
rgrover1	717:11b41f651697	1143	*
rgrover1	717:11b41f651697	1144	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	1145	* You should use the parallel API from GattServer directly. A former call
rgrover1	717:11b41f651697	1146	* to ble.onDataSent(...) should be replaced with
rgrover1	717:11b41f651697	1147	* ble.gattServer().onDataSent(...).
rgrover1	717:11b41f651697	1148	*/
rgrover1	717:11b41f651697	1149	void onDataSent(void (*callback)(unsigned count)) {
rgrover1	717:11b41f651697	1150	gattServer().onDataSent(callback);
rgrover1	717:11b41f651697	1151	}
rgrover1	717:11b41f651697	1152	template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
rgrover1	717:11b41f651697	1153	gattServer().onDataSent(objPtr, memberPtr);
rgrover1	717:11b41f651697	1154	}
rgrover1	717:11b41f651697	1155
rgrover1	717:11b41f651697	1156	/**
rgrover1	717:11b41f651697	1157	* Setup a callback for when an attribute has its value updated by or at the
rgrover1	717:11b41f651697	1158	* connected peer. For a peripheral, this callback triggered when the local
rgrover1	717:11b41f651697	1159	* GATT server has an attribute updated by a write command from the peer.
rgrover1	717:11b41f651697	1160	* For a Central, this callback is triggered when a response is received for
rgrover1	717:11b41f651697	1161	* a write request.
rgrover1	717:11b41f651697	1162	*
rgrover1	717:11b41f651697	1163	* @Note: it is possible to chain together multiple onDataWritten callbacks
rgrover1	717:11b41f651697	1164	* (potentially from different modules of an application) to receive updates
rgrover1	717:11b41f651697	1165	* to characteristics. Many services, such as DFU and UART add their own
rgrover1	717:11b41f651697	1166	* onDataWritten callbacks behind the scenes to trap interesting events.
rgrover1	717:11b41f651697	1167	*
rgrover1	717:11b41f651697	1168	* @Note: it is also possible to setup a callback into a member function of
rgrover1	717:11b41f651697	1169	* some object.
rgrover1	717:11b41f651697	1170	*
rgrover1	717:11b41f651697	1171	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	1172	* You should use the parallel API from GattServer directly. A former call
rgrover1	717:11b41f651697	1173	* to ble.onDataWritten(...) should be replaced with
rgrover1	717:11b41f651697	1174	* ble.gattServer().onDataWritten(...).
rgrover1	717:11b41f651697	1175	*/
rgrover1	717:11b41f651697	1176	void onDataWritten(void (callback)(const GattWriteCallbackParams eventDataP)) {
rgrover1	717:11b41f651697	1177	gattServer().onDataWritten(callback);
rgrover1	717:11b41f651697	1178	}
rgrover1	717:11b41f651697	1179	template <typename T> void onDataWritten(T * objPtr, void (T::memberPtr)(const GattWriteCallbackParams context)) {
rgrover1	717:11b41f651697	1180	gattServer().onDataWritten(objPtr, memberPtr);
rgrover1	717:11b41f651697	1181	}
rgrover1	717:11b41f651697	1182
rgrover1	717:11b41f651697	1183	/**
rgrover1	717:11b41f651697	1184	* Setup a callback to be invoked on the peripheral when an attribute is
rgrover1	717:11b41f651697	1185	* being read by a remote client.
rgrover1	717:11b41f651697	1186	*
rgrover1	717:11b41f651697	1187	* @Note: this functionality may not be available on all underlying stacks.
rgrover1	717:11b41f651697	1188	* You could use GattCharacteristic::setReadAuthorizationCallback() as an
rgrover1	717:11b41f651697	1189	* alternative.
rgrover1	717:11b41f651697	1190	*
rgrover1	717:11b41f651697	1191	* @Note: it is possible to chain together multiple onDataRead callbacks
rgrover1	717:11b41f651697	1192	* (potentially from different modules of an application) to receive updates
rgrover1	717:11b41f651697	1193	* to characteristics. Services may add their own onDataRead callbacks
rgrover1	717:11b41f651697	1194	* behind the scenes to trap interesting events.
rgrover1	717:11b41f651697	1195	*
rgrover1	717:11b41f651697	1196	* @Note: it is also possible to setup a callback into a member function of
rgrover1	717:11b41f651697	1197	* some object.
rgrover1	717:11b41f651697	1198	*
rgrover1	717:11b41f651697	1199	* @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
rgrover1	717:11b41f651697	1200	* else BLE_ERROR_NONE.
rgrover1	717:11b41f651697	1201	*
rgrover1	717:11b41f651697	1202	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	1203	* You should use the parallel API from GattServer directly. A former call
rgrover1	717:11b41f651697	1204	* to ble.onDataRead(...) should be replaced with
rgrover1	717:11b41f651697	1205	* ble.gattServer().onDataRead(...).
rgrover1	717:11b41f651697	1206	*/
rgrover1	717:11b41f651697	1207	ble_error_t onDataRead(void (callback)(const GattReadCallbackParams eventDataP)) {
rgrover1	717:11b41f651697	1208	return gattServer().onDataRead(callback);
rgrover1	717:11b41f651697	1209	}
rgrover1	717:11b41f651697	1210	template <typename T> ble_error_t onDataRead(T * objPtr, void (T::memberPtr)(const GattReadCallbackParams context)) {
rgrover1	717:11b41f651697	1211	return gattServer().onDataRead(objPtr, memberPtr);
rgrover1	717:11b41f651697	1212	}
rgrover1	717:11b41f651697	1213
rgrover1	717:11b41f651697	1214	/**
rgrover1	717:11b41f651697	1215	* Setup a callback for when notifications/indications are enabled for a
rgrover1	717:11b41f651697	1216	* characteristic on the local GattServer.
rgrover1	717:11b41f651697	1217	*
rgrover1	717:11b41f651697	1218	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	1219	* You should use the parallel API from GattServer directly. A former call
rgrover1	717:11b41f651697	1220	* to ble.onUpdatesEnabled(callback) should be replaced with
rgrover1	717:11b41f651697	1221	* ble.gattServer().onUpdatesEnabled(callback).
rgrover1	717:11b41f651697	1222	*/
rgrover1	717:11b41f651697	1223	void onUpdatesEnabled(GattServer::EventCallback_t callback) {
rgrover1	717:11b41f651697	1224	gattServer().onUpdatesEnabled(callback);
rgrover1	717:11b41f651697	1225	}
rgrover1	717:11b41f651697	1226
rgrover1	717:11b41f651697	1227	/**
rgrover1	717:11b41f651697	1228	* Setup a callback for when notifications/indications are disabled for a
rgrover1	717:11b41f651697	1229	* characteristic on the local GattServer.
rgrover1	717:11b41f651697	1230	*
rgrover1	717:11b41f651697	1231	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	1232	* You should use the parallel API from GattServer directly. A former call
rgrover1	717:11b41f651697	1233	* to ble.onUpdatesEnabled(callback) should be replaced with
rgrover1	717:11b41f651697	1234	* ble.gattServer().onUpdatesEnabled(callback).
rgrover1	717:11b41f651697	1235	*/
rgrover1	717:11b41f651697	1236	void onUpdatesDisabled(GattServer::EventCallback_t callback) {
rgrover1	717:11b41f651697	1237	gattServer().onUpdatesDisabled(callback);
rgrover1	717:11b41f651697	1238	}
rgrover1	717:11b41f651697	1239
rgrover1	717:11b41f651697	1240	/**
rgrover1	717:11b41f651697	1241	* Setup a callback for when the GATT server receives a response for an
rgrover1	717:11b41f651697	1242	* indication event sent previously.
rgrover1	717:11b41f651697	1243	*
rgrover1	717:11b41f651697	1244	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	1245	* You should use the parallel API from GattServer directly. A former call
rgrover1	717:11b41f651697	1246	* to ble.onConfirmationReceived(callback) should be replaced with
rgrover1	717:11b41f651697	1247	* ble.gattServer().onConfirmationReceived(callback).
rgrover1	717:11b41f651697	1248	*/
rgrover1	717:11b41f651697	1249	void onConfirmationReceived(GattServer::EventCallback_t callback) {
rgrover1	717:11b41f651697	1250	gattServer().onConfirmationReceived(callback);
rgrover1	717:11b41f651697	1251	}
rgrover1	717:11b41f651697	1252
rgrover1	717:11b41f651697	1253	/**
rgrover1	717:11b41f651697	1254	* Setup a callback for when the security setup procedure (key generation
rgrover1	717:11b41f651697	1255	* and exchange) for a link has started. This will be skipped for bonded
rgrover1	717:11b41f651697	1256	* devices. The callback is passed in parameters received from the peer's
rgrover1	717:11b41f651697	1257	* security request: bool allowBonding, bool requireMITM, and
rgrover1	717:11b41f651697	1258	* SecurityIOCapabilities_t.
rgrover1	717:11b41f651697	1259	*
rgrover1	717:11b41f651697	1260	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	1261	* You should use the parallel API from SecurityManager directly. A former
rgrover1	717:11b41f651697	1262	* call to ble.onSecuritySetupInitiated(callback) should be replaced with
rgrover1	717:11b41f651697	1263	* ble.securityManager().onSecuritySetupInitiated(callback).
rgrover1	717:11b41f651697	1264	*/
rgrover1	717:11b41f651697	1265	void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
rgrover1	717:11b41f651697	1266	securityManager().onSecuritySetupInitiated(callback);
rgrover1	717:11b41f651697	1267	}
rgrover1	717:11b41f651697	1268
rgrover1	717:11b41f651697	1269	/**
rgrover1	717:11b41f651697	1270	* Setup a callback for when the security setup procedure (key generation
rgrover1	717:11b41f651697	1271	* and exchange) for a link has completed. This will be skipped for bonded
rgrover1	717:11b41f651697	1272	* devices. The callback is passed in the success/failure status of the
rgrover1	717:11b41f651697	1273	* security setup procedure.
rgrover1	717:11b41f651697	1274	*
rgrover1	717:11b41f651697	1275	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	1276	* You should use the parallel API from SecurityManager directly. A former
rgrover1	717:11b41f651697	1277	* call to ble.onSecuritySetupCompleted(callback) should be replaced with
rgrover1	717:11b41f651697	1278	* ble.securityManager().onSecuritySetupCompleted(callback).
rgrover1	717:11b41f651697	1279	*/
rgrover1	717:11b41f651697	1280	void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
rgrover1	717:11b41f651697	1281	securityManager().onSecuritySetupCompleted(callback);
rgrover1	717:11b41f651697	1282	}
rgrover1	717:11b41f651697	1283
rgrover1	717:11b41f651697	1284	/**
rgrover1	717:11b41f651697	1285	* Setup a callback for when a link with the peer is secured. For bonded
rgrover1	717:11b41f651697	1286	* devices, subsequent reconnections with bonded peer will result only in
rgrover1	717:11b41f651697	1287	* this callback when the link is secured and setup procedures will not
rgrover1	717:11b41f651697	1288	* occur unless the bonding information is either lost or deleted on either
rgrover1	717:11b41f651697	1289	* or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
rgrover1	717:11b41f651697	1290	* to the level of security in effect for the secured link.
rgrover1	717:11b41f651697	1291	*
rgrover1	717:11b41f651697	1292	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	1293	* You should use the parallel API from SecurityManager directly. A former
rgrover1	717:11b41f651697	1294	* call to ble.onLinkSecured(callback) should be replaced with
rgrover1	717:11b41f651697	1295	* ble.securityManager().onLinkSecured(callback).
rgrover1	717:11b41f651697	1296	*/
rgrover1	717:11b41f651697	1297	void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
rgrover1	717:11b41f651697	1298	securityManager().onLinkSecured(callback);
rgrover1	717:11b41f651697	1299	}
rgrover1	717:11b41f651697	1300
rgrover1	717:11b41f651697	1301	/**
rgrover1	717:11b41f651697	1302	* Setup a callback for successful bonding; i.e. that link-specific security
rgrover1	717:11b41f651697	1303	* context is stored persistently for a peer device.
rgrover1	717:11b41f651697	1304	*
rgrover1	717:11b41f651697	1305	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	1306	* You should use the parallel API from SecurityManager directly. A former
rgrover1	717:11b41f651697	1307	* call to ble.onSecurityContextStored(callback) should be replaced with
rgrover1	717:11b41f651697	1308	* ble.securityManager().onSecurityContextStored(callback).
rgrover1	717:11b41f651697	1309	*/
rgrover1	717:11b41f651697	1310	void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
rgrover1	717:11b41f651697	1311	securityManager().onSecurityContextStored(callback);
rgrover1	717:11b41f651697	1312	}
rgrover1	717:11b41f651697	1313
rgrover1	717:11b41f651697	1314	/**
rgrover1	717:11b41f651697	1315	* Setup a callback for when the passkey needs to be displayed on a
rgrover1	717:11b41f651697	1316	* peripheral with DISPLAY capability. This happens when security is
rgrover1	717:11b41f651697	1317	* configured to prevent Man-In-The-Middle attacks, and a PIN (or passkey)
rgrover1	717:11b41f651697	1318	* needs to be exchanged between the peers to authenticate the connection
rgrover1	717:11b41f651697	1319	* attempt.
rgrover1	717:11b41f651697	1320	*
rgrover1	717:11b41f651697	1321	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	717:11b41f651697	1322	* You should use the parallel API from SecurityManager directly. A former
rgrover1	717:11b41f651697	1323	* call to ble.onPasskeyDisplay(callback) should be replaced with
rgrover1	717:11b41f651697	1324	* ble.securityManager().onPasskeyDisplay(callback).
rgrover1	717:11b41f651697	1325	*/
rgrover1	717:11b41f651697	1326	void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
rgrover1	717:11b41f651697	1327	return securityManager().onPasskeyDisplay(callback);
rgrover1	717:11b41f651697	1328	}
rgrover1	717:11b41f651697	1329
rgrover1	717:11b41f651697	1330	public:
rgrover1	717:11b41f651697	1331	BLE() : transport(createBLEInstance()) {
rgrover1	717:11b41f651697	1332	/* empty */
rgrover1	717:11b41f651697	1333	}
rgrover1	717:11b41f651697	1334
rgrover1	717:11b41f651697	1335	private:
rgrover1	717:11b41f651697	1336	BLEInstanceBase const transport; / the device specific backend */
rgrover1	717:11b41f651697	1337	};
rgrover1	717:11b41f651697	1338
rgrover1	717:11b41f651697	1339	typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
rgrover1	717:11b41f651697	1340	* code. Will be dropped at some point soon.*/
rgrover1	717:11b41f651697	1341
rgrover1	717:11b41f651697	1342	#endif // ifndef __BLE_H__

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	02 Mar 2016
Imports:	2
Forks:	0
Commits:	1132
Dependents:	0
Dependencies:	0
Followers:	1

ble/BLE.h@753:424c2ae44553, 2015-07-21 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning