thomas ya / TextLCD

for

Dependents:   LV_FGSE_Controller_Interface

TextLCD_Config.h@39:e9c2319de9c5, 2015-05-19 (annotated)

Committer:
wim
Date:
Tue May 19 18:13:00 2015 +0000
Revision:
39:e9c2319de9c5
Parent:
38:cbe275b0b647
Child:
40:d3496c3ea301
Working version PCF2119

Who changed what in which revision?

UserRevisionLine numberNew contents of line
wim 37:ce348c002929 1 /* mbed TextLCD Library, for LCDs based on HD44780 controllers
wim 34:e5a0dcb43ecc 2 * Copyright (c) 2014, WH
wim 34:e5a0dcb43ecc 3 * 2014, v01: WH, Extracted from TextLCD.h as of v14
wim 35:311be6444a39 4 * 2014, v02: WH, Added AC780 support, added I2C expander modules, fixed setBacklight() for inverted logic modules. Fixed bug in LCD_SPI_N define
wim 36:9f5f86dfd44a 5 * 2014, v03: WH, Added LCD_SPI_N_3_8 define for ST7070
wim 37:ce348c002929 6 * 2015, v04: WH, Added support for alternative fonttables (eg PCF21XX)
wim 37:ce348c002929 7 * 2015, v05: WH, Clean up low-level _writeCommand() and _writeData(), Added support for alt fonttables (eg PCF21XX), Added ST7066_ACM for ACM1602 module, fixed contrast for ST7032
wim 38:cbe275b0b647 8 * 2015, v06: WH, Performance improvement I2C portexpander
wim 38:cbe275b0b647 9 * 2015, v07: WH, Fixed Adafruit I2C/SPI portexpander pinmappings, fixed SYDZ Backlight
wim 39:e9c2319de9c5 10 * 2015, v08: WH, Added defines to reduce memory footprint (eg LCD_ICON), added some I2C portexpander defines
wim 34:e5a0dcb43ecc 11 *
wim 34:e5a0dcb43ecc 12 * Permission is hereby granted, free of charge, to any person obtaining a copy
wim 34:e5a0dcb43ecc 13 * of this software and associated documentation files (the "Software"), to deal
wim 34:e5a0dcb43ecc 14 * in the Software without restriction, including without limitation the rights
wim 34:e5a0dcb43ecc 15 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
wim 34:e5a0dcb43ecc 16 * copies of the Software, and to permit persons to whom the Software is
wim 34:e5a0dcb43ecc 17 * furnished to do so, subject to the following conditions:
wim 34:e5a0dcb43ecc 18 *
wim 34:e5a0dcb43ecc 19 * The above copyright notice and this permission notice shall be included in
wim 34:e5a0dcb43ecc 20 * all copies or substantial portions of the Software.
wim 34:e5a0dcb43ecc 21 *
wim 34:e5a0dcb43ecc 22 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
wim 34:e5a0dcb43ecc 23 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
wim 34:e5a0dcb43ecc 24 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
wim 34:e5a0dcb43ecc 25 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
wim 34:e5a0dcb43ecc 26 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
wim 34:e5a0dcb43ecc 27 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
wim 34:e5a0dcb43ecc 28 * THE SOFTWARE.
wim 34:e5a0dcb43ecc 29 */
wim 34:e5a0dcb43ecc 30 #ifndef MBED_TEXTLCDCONFIG_H
wim 34:e5a0dcb43ecc 31 #define MBED_TEXTLCDCONFIG_H
wim 34:e5a0dcb43ecc 32
wim 34:e5a0dcb43ecc 33 //Select hardware interface options to reduce memory footprint (multiple options allowed)
wim 34:e5a0dcb43ecc 34 #define LCD_I2C 1 /* I2C Expander PCF8574/MCP23008 */
wim 34:e5a0dcb43ecc 35 #define LCD_SPI 1 /* SPI Expander SN74595 */
wim 34:e5a0dcb43ecc 36 #define LCD_I2C_N 1 /* Native I2C bus */
wim 35:311be6444a39 37 #define LCD_SPI_N 1 /* Native SPI bus */
wim 36:9f5f86dfd44a 38 #define LCD_SPI_N_3_8 1 /* Native SPI bus */
wim 34:e5a0dcb43ecc 39 #define LCD_SPI_N_3_9 1 /* Native SPI bus */
wim 34:e5a0dcb43ecc 40 #define LCD_SPI_N_3_10 1 /* Native SPI bus */
wim 34:e5a0dcb43ecc 41 #define LCD_SPI_N_3_16 1 /* Native SPI bus */
wim 34:e5a0dcb43ecc 42 #define LCD_SPI_N_3_24 1 /* Native SPI bus */
wim 35:311be6444a39 43
wim 34:e5a0dcb43ecc 44 //Select options to reduce memory footprint (multiple options allowed)
wim 39:e9c2319de9c5 45 #define LCD_UDC 1 /* Enable predefined UDC example*/
wim 39:e9c2319de9c5 46 #define LCD_PRINTF 1 /* Enable Stream implementation */
wim 39:e9c2319de9c5 47 #define LCD_ICON 1 /* Enable Icon implementation -2.0K codesize*/
wim 39:e9c2319de9c5 48 #define LCD_ORIENT 1 /* Enable Orientation switch implementation -0.9K codesize*/
wim 39:e9c2319de9c5 49 #define LCD_BIGFONT 0 /* Enable Big Font implementation -0.6K codesize */
wim 39:e9c2319de9c5 50 #define LCD_INVERT 0 /* Enable display Invert implementation -0.5K codesize*/
wim 39:e9c2319de9c5 51 #define LCD_POWER 0 /* Enable Power control implementation -0.1K codesize*/
wim 39:e9c2319de9c5 52 #define LCD_BLINK 1 /* Enable UDC and Icon Blink control implementation -0.8K codesize*/
wim 34:e5a0dcb43ecc 53
wim 39:e9c2319de9c5 54 //Select option to activate default fonttable or alternatively use conversion for specific controller versions (eg PCF2119C, PCF2119R)
wim 39:e9c2319de9c5 55 #define LCD_DEFAULT_FONT 0
wim 37:ce348c002929 56
wim 34:e5a0dcb43ecc 57 //Pin Defines for I2C PCF8574/PCF8574A or MCP23008 and SPI 74595 bus expander interfaces
wim 37:ce348c002929 58 //Different commercially available LCD portexpanders use different wiring conventions.
wim 37:ce348c002929 59 //LCD and serial portexpanders should be wired according to the tables below.
wim 34:e5a0dcb43ecc 60 //
wim 37:ce348c002929 61 //Select Serial Port Expander Hardware module (one option only)
wim 39:e9c2319de9c5 62 #define DEFAULT 0
wim 34:e5a0dcb43ecc 63 #define ADAFRUIT 0
wim 34:e5a0dcb43ecc 64 #define DFROBOT 0
wim 39:e9c2319de9c5 65 #define LCM1602 0
wim 35:311be6444a39 66 #define YWROBOT 0
wim 35:311be6444a39 67 #define GYLCD 0
wim 39:e9c2319de9c5 68 #define MJKDZ 0
wim 39:e9c2319de9c5 69 #define SYDZ 1
wim 39:e9c2319de9c5 70 #define WIDEHK 0
wim 39:e9c2319de9c5 71 #define LCDPLUG 0
wim 34:e5a0dcb43ecc 72
wim 34:e5a0dcb43ecc 73 #if (DEFAULT==1)
wim 34:e5a0dcb43ecc 74 //Definitions for default (WH) mapping between serial port expander pins and LCD controller
wim 34:e5a0dcb43ecc 75 //This hardware supports the I2C bus expander (PCF8574/PCF8574A or MCP23008) and SPI bus expander (74595) interfaces
wim 34:e5a0dcb43ecc 76 //See https://mbed.org/cookbook/Text-LCD-Enhanced
wim 34:e5a0dcb43ecc 77 //
wim 34:e5a0dcb43ecc 78 //Note: LCD RW pin must be connected to GND
wim 34:e5a0dcb43ecc 79 // E2 is used for LCD40x4 (second controller)
wim 34:e5a0dcb43ecc 80 // BL may be used to control backlight
wim 38:cbe275b0b647 81
wim 38:cbe275b0b647 82 //I2C bus expander (PCF8574/PCF8574A or MCP23008) interface
wim 38:cbe275b0b647 83 #define LCD_BUS_I2C_D4 (1 << 0)
wim 38:cbe275b0b647 84 #define LCD_BUS_I2C_D5 (1 << 1)
wim 38:cbe275b0b647 85 #define LCD_BUS_I2C_D6 (1 << 2)
wim 38:cbe275b0b647 86 #define LCD_BUS_I2C_D7 (1 << 3)
wim 38:cbe275b0b647 87 #define LCD_BUS_I2C_RS (1 << 4)
wim 38:cbe275b0b647 88 #define LCD_BUS_I2C_E (1 << 5)
wim 38:cbe275b0b647 89 #define LCD_BUS_I2C_E2 (1 << 6)
wim 38:cbe275b0b647 90 #define LCD_BUS_I2C_BL (1 << 7)
wim 34:e5a0dcb43ecc 91
wim 38:cbe275b0b647 92 #define LCD_BUS_I2C_RW (1 << 6)
wim 38:cbe275b0b647 93
wim 38:cbe275b0b647 94 //SPI bus expander (74595) interface, same as I2C
wim 38:cbe275b0b647 95 #define LCD_BUS_SPI_D4 LCD_BUS_I2C_D4
wim 38:cbe275b0b647 96 #define LCD_BUS_SPI_D5 LCD_BUS_I2C_D5
wim 38:cbe275b0b647 97 #define LCD_BUS_SPI_D6 LCD_BUS_I2C_D6
wim 38:cbe275b0b647 98 #define LCD_BUS_SPI_D7 LCD_BUS_I2C_D7
wim 38:cbe275b0b647 99 #define LCD_BUS_SPI_RS LCD_BUS_I2C_RS
wim 38:cbe275b0b647 100 #define LCD_BUS_SPI_E LCD_BUS_I2C_E
wim 38:cbe275b0b647 101 #define LCD_BUS_SPI_E2 LCD_BUS_I2C_E2
wim 38:cbe275b0b647 102 #define LCD_BUS_SPI_BL LCD_BUS_I2C_BL
wim 38:cbe275b0b647 103
wim 38:cbe275b0b647 104 #define LCD_BUS_SPI_RW LCD_BUS_I2C_RW
wim 34:e5a0dcb43ecc 105
wim 34:e5a0dcb43ecc 106 //Select I2C Portexpander type (one option only)
wim 34:e5a0dcb43ecc 107 #define PCF8574 1
wim 34:e5a0dcb43ecc 108 #define MCP23008 0
wim 35:311be6444a39 109
wim 35:311be6444a39 110 //Inverted Backlight control
wim 35:311be6444a39 111 #define BACKLIGHT_INV 0
wim 34:e5a0dcb43ecc 112 #endif
wim 34:e5a0dcb43ecc 113
wim 34:e5a0dcb43ecc 114 #if (ADAFRUIT==1)
wim 34:e5a0dcb43ecc 115 //Definitions for Adafruit i2cspilcdbackpack mapping between serial port expander pins and LCD controller
wim 34:e5a0dcb43ecc 116 //This hardware supports both an I2C expander (MCP23008) and an SPI expander (74595) selectable by a jumper.
wim 35:311be6444a39 117 //Slaveaddress may be set by solderbridges (default 0x40). SDA/SCL has pullup Resistors onboard.
wim 34:e5a0dcb43ecc 118 //See http://www.ladyada.net/products/i2cspilcdbackpack
wim 34:e5a0dcb43ecc 119 //
wim 34:e5a0dcb43ecc 120 //Note: LCD RW pin must be kept LOW
wim 34:e5a0dcb43ecc 121 // E2 is not available on this hardware and so it does not support LCD40x4 (second controller)
wim 34:e5a0dcb43ecc 122 // BL is used to control backlight
wim 38:cbe275b0b647 123 //Note: The pinmappings are different for the MCP23008 and the 74595!
wim 38:cbe275b0b647 124
wim 38:cbe275b0b647 125 //I2C bus expander (MCP23008) interface
wim 38:cbe275b0b647 126 #define LCD_BUS_I2C_0 (1 << 0)
wim 38:cbe275b0b647 127 #define LCD_BUS_I2C_RS (1 << 1)
wim 38:cbe275b0b647 128 #define LCD_BUS_I2C_E (1 << 2)
wim 38:cbe275b0b647 129 #define LCD_BUS_I2C_D4 (1 << 3)
wim 38:cbe275b0b647 130 #define LCD_BUS_I2C_D5 (1 << 4)
wim 38:cbe275b0b647 131 #define LCD_BUS_I2C_D6 (1 << 5)
wim 38:cbe275b0b647 132 #define LCD_BUS_I2C_D7 (1 << 6)
wim 38:cbe275b0b647 133 #define LCD_BUS_I2C_BL (1 << 7)
wim 34:e5a0dcb43ecc 134
wim 38:cbe275b0b647 135 #define LCD_BUS_I2C_E2 (1 << 0)
wim 38:cbe275b0b647 136 #define LCD_BUS_I2C_RW (1 << 0)
wim 38:cbe275b0b647 137
wim 38:cbe275b0b647 138 //SPI bus expander (74595) interface
wim 38:cbe275b0b647 139 #define LCD_BUS_SPI_0 (1 << 0)
wim 38:cbe275b0b647 140 #define LCD_BUS_SPI_RS (1 << 1)
wim 38:cbe275b0b647 141 #define LCD_BUS_SPI_E (1 << 2)
wim 38:cbe275b0b647 142 #define LCD_BUS_SPI_D7 (1 << 3)
wim 38:cbe275b0b647 143 #define LCD_BUS_SPI_D6 (1 << 4)
wim 38:cbe275b0b647 144 #define LCD_BUS_SPI_D5 (1 << 5)
wim 38:cbe275b0b647 145 #define LCD_BUS_SPI_D4 (1 << 6)
wim 38:cbe275b0b647 146 #define LCD_BUS_SPI_BL (1 << 7)
wim 38:cbe275b0b647 147
wim 38:cbe275b0b647 148 #define LCD_BUS_SPI_E2 (1 << 0)
wim 38:cbe275b0b647 149 #define LCD_BUS_SPI_RW (1 << 0)
wim 34:e5a0dcb43ecc 150
wim 34:e5a0dcb43ecc 151 //Force I2C portexpander type
wim 34:e5a0dcb43ecc 152 #define PCF8574 0
wim 34:e5a0dcb43ecc 153 #define MCP23008 1
wim 35:311be6444a39 154
wim 35:311be6444a39 155 //Inverted Backlight control
wim 35:311be6444a39 156 #define BACKLIGHT_INV 0
wim 34:e5a0dcb43ecc 157 #endif
wim 34:e5a0dcb43ecc 158
wim 34:e5a0dcb43ecc 159 #if (DFROBOT==1)
wim 34:e5a0dcb43ecc 160 //Definitions for DFROBOT LCD2004 Module mapping between serial port expander pins and LCD controller
wim 34:e5a0dcb43ecc 161 //This hardware uses PCF8574 and is different from earlier/different Arduino I2C LCD displays
wim 35:311be6444a39 162 //Slaveaddress hardwired to 0x4E. SDA/SCL has pullup Resistors onboard.
wim 35:311be6444a39 163 //See http://arduino-info.wikispaces.com/LCD-Blue-I2C
wim 35:311be6444a39 164 //
wim 35:311be6444a39 165 //Definitions for DFROBOT V1.1
wim 35:311be6444a39 166 //This hardware uses PCF8574. Slaveaddress may be set by jumpers (default 0x40).
wim 35:311be6444a39 167 //SDA/SCL has pullup Resistors onboard and features a voltage level converter 3V3 <-> 5V.
wim 35:311be6444a39 168 //See http://www.dfrobot.com/index.php?route=product/product&product_id=135
wim 35:311be6444a39 169 //
wim 35:311be6444a39 170 //
wim 35:311be6444a39 171 //Note: LCD RW pin must be kept LOW
wim 35:311be6444a39 172 // E2 is not available on default Arduino hardware and so it does not support LCD40x4 (second controller)
wim 35:311be6444a39 173 // BL is used to control backlight
wim 38:cbe275b0b647 174
wim 38:cbe275b0b647 175 //I2C bus expander PCF8574 interface
wim 38:cbe275b0b647 176 #define LCD_BUS_I2C_RS (1 << 0)
wim 38:cbe275b0b647 177 #define LCD_BUS_I2C_RW (1 << 1)
wim 38:cbe275b0b647 178 #define LCD_BUS_I2C_E (1 << 2)
wim 38:cbe275b0b647 179 #define LCD_BUS_I2C_BL (1 << 3)
wim 38:cbe275b0b647 180 #define LCD_BUS_I2C_D4 (1 << 4)
wim 38:cbe275b0b647 181 #define LCD_BUS_I2C_D5 (1 << 5)
wim 38:cbe275b0b647 182 #define LCD_BUS_I2C_D6 (1 << 6)
wim 38:cbe275b0b647 183 #define LCD_BUS_I2C_D7 (1 << 7)
wim 38:cbe275b0b647 184
wim 38:cbe275b0b647 185 #define LCD_BUS_I2C_E2 (1 << 1)
wim 35:311be6444a39 186
wim 38:cbe275b0b647 187 //SPI bus expander (74595) interface, same as I2C
wim 38:cbe275b0b647 188 #define LCD_BUS_SPI_RS LCD_BUS_I2C_RS
wim 38:cbe275b0b647 189 #define LCD_BUS_SPI_RW LCD_BUS_I2C_RW
wim 38:cbe275b0b647 190 #define LCD_BUS_SPI_E LCD_BUS_I2C_E
wim 38:cbe275b0b647 191 #define LCD_BUS_SPI_BL LCD_BUS_I2C_BL
wim 38:cbe275b0b647 192 #define LCD_BUS_SPI_D4 LCD_BUS_I2C_D4
wim 38:cbe275b0b647 193 #define LCD_BUS_SPI_D5 LCD_BUS_I2C_D5
wim 38:cbe275b0b647 194 #define LCD_BUS_SPI_D6 LCD_BUS_I2C_D6
wim 38:cbe275b0b647 195 #define LCD_BUS_SPI_D7 LCD_BUS_I2C_D7
wim 38:cbe275b0b647 196
wim 38:cbe275b0b647 197 #define LCD_BUS_SPI_E2 LCD_BUS_I2C_E2
wim 38:cbe275b0b647 198
wim 35:311be6444a39 199
wim 35:311be6444a39 200 //Force I2C portexpander type
wim 35:311be6444a39 201 #define PCF8574 1
wim 35:311be6444a39 202 #define MCP23008 0
wim 35:311be6444a39 203
wim 35:311be6444a39 204 //Inverted Backlight control
wim 35:311be6444a39 205 #define BACKLIGHT_INV 0
wim 35:311be6444a39 206 #endif
wim 35:311be6444a39 207
wim 39:e9c2319de9c5 208 #if ((YWROBOT==1) || (LCM1602==1))
wim 35:311be6444a39 209 //Definitions for YWROBOT LCM1602 V1 Module mapping between serial port expander pins and LCD controller.
wim 39:e9c2319de9c5 210 //Very similar to DFROBOT. Also marked as 'Funduino'. This hardware uses PCF8574.
wim 35:311be6444a39 211 //Slaveaddress may be set by solderbridges (default 0x4E). SDA/SCL has no pullup Resistors onboard.
wim 34:e5a0dcb43ecc 212 //See http://arduino-info.wikispaces.com/LCD-Blue-I2C
wim 34:e5a0dcb43ecc 213 //
wim 34:e5a0dcb43ecc 214 //Note: LCD RW pin must be kept LOW
wim 35:311be6444a39 215 // E2 is not available on default hardware and so it does not support LCD40x4 (second controller)
wim 39:e9c2319de9c5 216 // BL is used to control backlight.
wim 38:cbe275b0b647 217
wim 38:cbe275b0b647 218 //I2C bus expander PCF8574 interface
wim 38:cbe275b0b647 219 #define LCD_BUS_I2C_RS (1 << 0)
wim 38:cbe275b0b647 220 #define LCD_BUS_I2C_RW (1 << 1)
wim 38:cbe275b0b647 221 #define LCD_BUS_I2C_E (1 << 2)
wim 38:cbe275b0b647 222 #define LCD_BUS_I2C_BL (1 << 3)
wim 38:cbe275b0b647 223 #define LCD_BUS_I2C_D4 (1 << 4)
wim 38:cbe275b0b647 224 #define LCD_BUS_I2C_D5 (1 << 5)
wim 38:cbe275b0b647 225 #define LCD_BUS_I2C_D6 (1 << 6)
wim 38:cbe275b0b647 226 #define LCD_BUS_I2C_D7 (1 << 7)
wim 34:e5a0dcb43ecc 227
wim 38:cbe275b0b647 228 #define LCD_BUS_I2C_E2 (1 << 1)
wim 38:cbe275b0b647 229
wim 38:cbe275b0b647 230 //SPI bus expander (74595) interface, same as I2C
wim 38:cbe275b0b647 231 #define LCD_BUS_SPI_RS LCD_BUS_I2C_RS
wim 38:cbe275b0b647 232 #define LCD_BUS_SPI_RW LCD_BUS_I2C_RW
wim 38:cbe275b0b647 233 #define LCD_BUS_SPI_E LCD_BUS_I2C_E
wim 38:cbe275b0b647 234 #define LCD_BUS_SPI_BL LCD_BUS_I2C_BL
wim 38:cbe275b0b647 235 #define LCD_BUS_SPI_D4 LCD_BUS_I2C_D4
wim 38:cbe275b0b647 236 #define LCD_BUS_SPI_D5 LCD_BUS_I2C_D5
wim 38:cbe275b0b647 237 #define LCD_BUS_SPI_D6 LCD_BUS_I2C_D6
wim 38:cbe275b0b647 238 #define LCD_BUS_SPI_D7 LCD_BUS_I2C_D7
wim 38:cbe275b0b647 239
wim 38:cbe275b0b647 240 #define LCD_BUS_SPI_E2 LCD_BUS_I2C_E2
wim 34:e5a0dcb43ecc 241
wim 34:e5a0dcb43ecc 242 //Force I2C portexpander type
wim 34:e5a0dcb43ecc 243 #define PCF8574 1
wim 34:e5a0dcb43ecc 244 #define MCP23008 0
wim 35:311be6444a39 245
wim 35:311be6444a39 246 //Inverted Backlight control
wim 35:311be6444a39 247 #define BACKLIGHT_INV 0
wim 34:e5a0dcb43ecc 248 #endif
wim 34:e5a0dcb43ecc 249
wim 39:e9c2319de9c5 250 #if ((GYLCD==1) || (MJKDZ==1))
wim 39:e9c2319de9c5 251 //Definitions for Arduino-IIC-LCD GY-LCD-V1, for GY-IICLCD and for MJKDZ Module mapping between serial port expander pins and LCD controller.
wim 35:311be6444a39 252 //Very similar to DFROBOT. This hardware uses PCF8574.
wim 35:311be6444a39 253 //Slaveaddress may be set by solderbridges (default 0x4E). SDA/SCL has pullup Resistors onboard.
wim 35:311be6444a39 254 //See http://arduino-info.wikispaces.com/LCD-Blue-I2C
wim 35:311be6444a39 255 //
wim 35:311be6444a39 256 //Note: LCD RW pin must be kept LOW
wim 35:311be6444a39 257 // E2 is not available on default hardware and so it does not support LCD40x4 (second controller)
wim 35:311be6444a39 258 // BL is used to control backlight, reverse logic: Low turns on Backlight. This is handled in setBacklight()
wim 38:cbe275b0b647 259
wim 38:cbe275b0b647 260 //I2C bus expander PCF8574 interface
wim 38:cbe275b0b647 261 #define LCD_BUS_I2C_D4 (1 << 0)
wim 38:cbe275b0b647 262 #define LCD_BUS_I2C_D5 (1 << 1)
wim 38:cbe275b0b647 263 #define LCD_BUS_I2C_D6 (1 << 2)
wim 38:cbe275b0b647 264 #define LCD_BUS_I2C_D7 (1 << 3)
wim 38:cbe275b0b647 265 #define LCD_BUS_I2C_E (1 << 4)
wim 38:cbe275b0b647 266 #define LCD_BUS_I2C_RW (1 << 5)
wim 38:cbe275b0b647 267 #define LCD_BUS_I2C_RS (1 << 6)
wim 38:cbe275b0b647 268 #define LCD_BUS_I2C_BL (1 << 7)
wim 35:311be6444a39 269
wim 38:cbe275b0b647 270 #define LCD_BUS_I2C_E2 (1 << 5)
wim 38:cbe275b0b647 271
wim 38:cbe275b0b647 272 //SPI bus expander (74595) interface
wim 38:cbe275b0b647 273 #define LCD_BUS_SPI_D4 LCD_BUS_I2C_D4
wim 38:cbe275b0b647 274 #define LCD_BUS_SPI_D5 LCD_BUS_I2C_D5
wim 38:cbe275b0b647 275 #define LCD_BUS_SPI_D6 LCD_BUS_I2C_D6
wim 38:cbe275b0b647 276 #define LCD_BUS_SPI_D7 LCD_BUS_I2C_D7
wim 38:cbe275b0b647 277 #define LCD_BUS_SPI_E LCD_BUS_I2C_E
wim 38:cbe275b0b647 278 #define LCD_BUS_SPI_RW LCD_BUS_I2C_RW
wim 38:cbe275b0b647 279 #define LCD_BUS_SPI_RS LCD_BUS_I2C_RS
wim 38:cbe275b0b647 280 #define LCD_BUS_SPI_BL LCD_BUS_I2C_BL
wim 38:cbe275b0b647 281
wim 38:cbe275b0b647 282 #define LCD_BUS_SPI_E2 LCD_BUS_I2C_E2
wim 35:311be6444a39 283
wim 35:311be6444a39 284 //Force I2C portexpander type
wim 35:311be6444a39 285 #define PCF8574 1
wim 35:311be6444a39 286 #define MCP23008 0
wim 35:311be6444a39 287
wim 35:311be6444a39 288 //Force Inverted Backlight control
wim 35:311be6444a39 289 #define BACKLIGHT_INV 1
wim 35:311be6444a39 290 #endif
wim 35:311be6444a39 291
wim 35:311be6444a39 292 #if (SYDZ==1)
wim 35:311be6444a39 293 //Definitions for SYDZ Module mapping between serial port expander pins and LCD controller.
wim 38:cbe275b0b647 294 //Very similar to DFROBOT. This hardware uses PCF8574A.
wim 38:cbe275b0b647 295 //Slaveaddress may be set by switches (default 0x70). SDA/SCL has pullup Resistors onboard.
wim 35:311be6444a39 296 //See ebay
wim 35:311be6444a39 297 //
wim 35:311be6444a39 298 //Note: LCD RW pin must be kept LOW
wim 35:311be6444a39 299 // E2 is not available on default hardware and so it does not support LCD40x4 (second controller)
wim 38:cbe275b0b647 300 // BL is used to control backlight
wim 38:cbe275b0b647 301
wim 38:cbe275b0b647 302 //I2C bus expander PCF8574A interface
wim 38:cbe275b0b647 303 #define LCD_BUS_I2C_RS (1 << 0)
wim 38:cbe275b0b647 304 #define LCD_BUS_I2C_RW (1 << 1)
wim 38:cbe275b0b647 305 #define LCD_BUS_I2C_E (1 << 2)
wim 38:cbe275b0b647 306 #define LCD_BUS_I2C_BL (1 << 3)
wim 38:cbe275b0b647 307 #define LCD_BUS_I2C_D4 (1 << 4)
wim 38:cbe275b0b647 308 #define LCD_BUS_I2C_D5 (1 << 5)
wim 38:cbe275b0b647 309 #define LCD_BUS_I2C_D6 (1 << 6)
wim 38:cbe275b0b647 310 #define LCD_BUS_I2C_D7 (1 << 7)
wim 35:311be6444a39 311
wim 38:cbe275b0b647 312 #define LCD_BUS_I2C_E2 (1 << 1)
wim 38:cbe275b0b647 313
wim 38:cbe275b0b647 314 //SPI bus expander (74595) interface, same as I2C
wim 38:cbe275b0b647 315 #define LCD_BUS_SPI_RS LCD_BUS_I2C_RS
wim 38:cbe275b0b647 316 #define LCD_BUS_SPI_RW LCD_BUS_I2C_RW
wim 38:cbe275b0b647 317 #define LCD_BUS_SPI_E LCD_BUS_I2C_E
wim 38:cbe275b0b647 318 #define LCD_BUS_SPI_BL LCD_BUS_I2C_BL
wim 38:cbe275b0b647 319 #define LCD_BUS_SPI_D4 LCD_BUS_I2C_D4
wim 38:cbe275b0b647 320 #define LCD_BUS_SPI_D5 LCD_BUS_I2C_D5
wim 38:cbe275b0b647 321 #define LCD_BUS_SPI_D6 LCD_BUS_I2C_D6
wim 38:cbe275b0b647 322 #define LCD_BUS_SPI_D7 LCD_BUS_I2C_D7
wim 38:cbe275b0b647 323
wim 38:cbe275b0b647 324 #define LCD_BUS_SPI_E2 LCD_BUS_I2C_E2
wim 35:311be6444a39 325
wim 35:311be6444a39 326 //Force I2C portexpander type
wim 35:311be6444a39 327 #define PCF8574 1
wim 35:311be6444a39 328 #define MCP23008 0
wim 35:311be6444a39 329
wim 35:311be6444a39 330 //Force Inverted Backlight control
wim 38:cbe275b0b647 331 #define BACKLIGHT_INV 0
wim 35:311be6444a39 332 #endif
wim 34:e5a0dcb43ecc 333
wim 39:e9c2319de9c5 334 #if (WIDEHK==1)
wim 39:e9c2319de9c5 335 //Definitions for WIDE.HK I2C backpack mapping between serial port expander pins and LCD controller
wim 39:e9c2319de9c5 336 //This hardware uses an MCP23008 I2C expander.
wim 39:e9c2319de9c5 337 //Slaveaddress is hardcoded at 0x4E. SDA/SCL has pullup Resistors onboard (3k3).
wim 39:e9c2319de9c5 338 //See http://www.wide.hk
wim 39:e9c2319de9c5 339 //
wim 39:e9c2319de9c5 340 //Note: LCD RW pin must be kept LOW
wim 39:e9c2319de9c5 341 // E2 is not available on this hardware and so it does not support LCD40x4 (second controller)
wim 39:e9c2319de9c5 342 // BL is used to control backlight
wim 39:e9c2319de9c5 343 //
wim 39:e9c2319de9c5 344
wim 39:e9c2319de9c5 345 //I2C bus expander (MCP23008) interface
wim 39:e9c2319de9c5 346 #define LCD_BUS_I2C_D4 (1 << 0)
wim 39:e9c2319de9c5 347 #define LCD_BUS_I2C_D5 (1 << 1)
wim 39:e9c2319de9c5 348 #define LCD_BUS_I2C_D6 (1 << 2)
wim 39:e9c2319de9c5 349 #define LCD_BUS_I2C_D7 (1 << 3)
wim 39:e9c2319de9c5 350 #define LCD_BUS_I2C_RS (1 << 4)
wim 39:e9c2319de9c5 351 #define LCD_BUS_I2C_RW (1 << 5)
wim 39:e9c2319de9c5 352 #define LCD_BUS_I2C_BL (1 << 6)
wim 39:e9c2319de9c5 353 #define LCD_BUS_I2C_E (1 << 7)
wim 39:e9c2319de9c5 354
wim 39:e9c2319de9c5 355 #define LCD_BUS_I2C_E2 (1 << 5)
wim 39:e9c2319de9c5 356
wim 39:e9c2319de9c5 357 //SPI bus expander (74595) interface, same as I2C
wim 39:e9c2319de9c5 358 #define LCD_BUS_SPI_D4 LCD_BUS_I2C_D4
wim 39:e9c2319de9c5 359 #define LCD_BUS_SPI_D5 LCD_BUS_I2C_D5
wim 39:e9c2319de9c5 360 #define LCD_BUS_SPI_D6 LCD_BUS_I2C_D6
wim 39:e9c2319de9c5 361 #define LCD_BUS_SPI_D7 LCD_BUS_I2C_D7
wim 39:e9c2319de9c5 362 #define LCD_BUS_SPI_RS LCD_BUS_I2C_RS
wim 39:e9c2319de9c5 363 #define LCD_BUS_SPI_RW LCD_BUS_I2C_RW
wim 39:e9c2319de9c5 364 #define LCD_BUS_SPI_BL LCD_BUS_I2C_BL
wim 39:e9c2319de9c5 365 #define LCD_BUS_SPI_E LCD_BUS_I2C_E
wim 39:e9c2319de9c5 366
wim 39:e9c2319de9c5 367 #define LCD_BUS_SPI_E2 LCD_BUS_I2C_E2
wim 39:e9c2319de9c5 368
wim 39:e9c2319de9c5 369 //Force I2C portexpander type
wim 39:e9c2319de9c5 370 #define PCF8574 0
wim 39:e9c2319de9c5 371 #define MCP23008 1
wim 39:e9c2319de9c5 372
wim 39:e9c2319de9c5 373 //Inverted Backlight control
wim 39:e9c2319de9c5 374 #define BACKLIGHT_INV 0
wim 39:e9c2319de9c5 375 #endif
wim 39:e9c2319de9c5 376
wim 39:e9c2319de9c5 377 #if (LCDPLUG==1)
wim 39:e9c2319de9c5 378 //Definitions for Jeelabs LCD_Plug I2C backpack mapping between serial port expander pins and LCD controller
wim 39:e9c2319de9c5 379 //This hardware uses an MCP23008 I2C expander.
wim 39:e9c2319de9c5 380 //Slaveaddress is hardcoded at 0x48. SDA/SCL has no pullup Resistors onboard.
wim 39:e9c2319de9c5 381 //See http://jeelabs.net/projects/hardware/wiki/lcd_plug
wim 39:e9c2319de9c5 382 //
wim 39:e9c2319de9c5 383 //Note: LCD RW pin must be kept LOW
wim 39:e9c2319de9c5 384 // E2 is available on a plug and so it does support LCD40x4 (second controller)
wim 39:e9c2319de9c5 385 // BL is used to control backlight
wim 39:e9c2319de9c5 386 //
wim 39:e9c2319de9c5 387
wim 39:e9c2319de9c5 388 //I2C bus expander (MCP23008) interface
wim 39:e9c2319de9c5 389 #define LCD_BUS_I2C_D4 (1 << 0)
wim 39:e9c2319de9c5 390 #define LCD_BUS_I2C_D5 (1 << 1)
wim 39:e9c2319de9c5 391 #define LCD_BUS_I2C_D6 (1 << 2)
wim 39:e9c2319de9c5 392 #define LCD_BUS_I2C_D7 (1 << 3)
wim 39:e9c2319de9c5 393 #define LCD_BUS_I2C_RS (1 << 4)
wim 39:e9c2319de9c5 394 #define LCD_BUS_I2C_E2 (1 << 5)
wim 39:e9c2319de9c5 395 #define LCD_BUS_I2C_E (1 << 6)
wim 39:e9c2319de9c5 396 #define LCD_BUS_I2C_BL (1 << 7)
wim 39:e9c2319de9c5 397
wim 39:e9c2319de9c5 398 #define LCD_BUS_I2C_RW (1 << 5)
wim 39:e9c2319de9c5 399
wim 39:e9c2319de9c5 400 //SPI bus expander (74595) interface, same as I2C
wim 39:e9c2319de9c5 401 #define LCD_BUS_SPI_D4 LCD_BUS_I2C_D4
wim 39:e9c2319de9c5 402 #define LCD_BUS_SPI_D5 LCD_BUS_I2C_D5
wim 39:e9c2319de9c5 403 #define LCD_BUS_SPI_D6 LCD_BUS_I2C_D6
wim 39:e9c2319de9c5 404 #define LCD_BUS_SPI_D7 LCD_BUS_I2C_D7
wim 39:e9c2319de9c5 405 #define LCD_BUS_SPI_RS LCD_BUS_I2C_RS
wim 39:e9c2319de9c5 406 #define LCD_BUS_SPI_E2 LCD_BUS_I2C_E2
wim 39:e9c2319de9c5 407 #define LCD_BUS_SPI_E LCD_BUS_I2C_E
wim 39:e9c2319de9c5 408 #define LCD_BUS_SPI_BL LCD_BUS_I2C_BL
wim 39:e9c2319de9c5 409
wim 39:e9c2319de9c5 410 #define LCD_BUS_SPI_RW LCD_BUS_I2C_RW
wim 39:e9c2319de9c5 411
wim 39:e9c2319de9c5 412 //Force I2C portexpander type
wim 39:e9c2319de9c5 413 #define PCF8574 0
wim 39:e9c2319de9c5 414 #define MCP23008 1
wim 39:e9c2319de9c5 415
wim 39:e9c2319de9c5 416 //Inverted Backlight control
wim 39:e9c2319de9c5 417 #define BACKLIGHT_INV 0
wim 39:e9c2319de9c5 418 #endif
wim 39:e9c2319de9c5 419
wim 39:e9c2319de9c5 420
wim 34:e5a0dcb43ecc 421 //Bitpattern Defines for I2C PCF8574/PCF8574A, MCP23008 and SPI 74595 Bus expanders
wim 37:ce348c002929 422 //Don't change!
wim 38:cbe275b0b647 423 #define LCD_BUS_I2C_MSK (LCD_BUS_I2C_D4 | LCD_BUS_I2C_D5 | LCD_BUS_I2C_D6 | LCD_BUS_I2C_D7)
wim 38:cbe275b0b647 424 #if (BACKLIGHT_INV == 1)
wim 38:cbe275b0b647 425 #define LCD_BUS_I2C_DEF (0x00 | LCD_BUS_I2C_BL)
wim 38:cbe275b0b647 426 #else
wim 38:cbe275b0b647 427 #define LCD_BUS_I2C_DEF 0x00
wim 38:cbe275b0b647 428 #endif
wim 34:e5a0dcb43ecc 429
wim 38:cbe275b0b647 430 #define LCD_BUS_SPI_MSK (LCD_BUS_SPI_D4 | LCD_BUS_SPI_D5 | LCD_BUS_SPI_D6 | LCD_BUS_SPI_D7)
wim 38:cbe275b0b647 431 #if (BACKLIGHT_INV == 1)
wim 38:cbe275b0b647 432 #define LCD_BUS_SPI_DEF (0x00 | LCD_BUS_SPI_BL)
wim 38:cbe275b0b647 433 #else
wim 38:cbe275b0b647 434 #define LCD_BUS_SPI_DEF 0x00
wim 38:cbe275b0b647 435 #endif
wim 38:cbe275b0b647 436
wim 34:e5a0dcb43ecc 437
wim 34:e5a0dcb43ecc 438 /* PCF8574/PCF8574A I2C portexpander slave address */
wim 34:e5a0dcb43ecc 439 #define PCF8574_SA0 0x40
wim 34:e5a0dcb43ecc 440 #define PCF8574_SA1 0x42
wim 34:e5a0dcb43ecc 441 #define PCF8574_SA2 0x44
wim 34:e5a0dcb43ecc 442 #define PCF8574_SA3 0x46
wim 34:e5a0dcb43ecc 443 #define PCF8574_SA4 0x48
wim 34:e5a0dcb43ecc 444 #define PCF8574_SA5 0x4A
wim 34:e5a0dcb43ecc 445 #define PCF8574_SA6 0x4C
wim 34:e5a0dcb43ecc 446 #define PCF8574_SA7 0x4E
wim 34:e5a0dcb43ecc 447
wim 34:e5a0dcb43ecc 448 #define PCF8574A_SA0 0x70
wim 34:e5a0dcb43ecc 449 #define PCF8574A_SA1 0x72
wim 34:e5a0dcb43ecc 450 #define PCF8574A_SA2 0x74
wim 34:e5a0dcb43ecc 451 #define PCF8574A_SA3 0x76
wim 34:e5a0dcb43ecc 452 #define PCF8574A_SA4 0x78
wim 34:e5a0dcb43ecc 453 #define PCF8574A_SA5 0x7A
wim 34:e5a0dcb43ecc 454 #define PCF8574A_SA6 0x7C
wim 34:e5a0dcb43ecc 455 #define PCF8574A_SA7 0x7E
wim 34:e5a0dcb43ecc 456
wim 34:e5a0dcb43ecc 457 /* MCP23008 I2C portexpander slave address */
wim 34:e5a0dcb43ecc 458 #define MCP23008_SA0 0x40
wim 34:e5a0dcb43ecc 459 #define MCP23008_SA1 0x42
wim 34:e5a0dcb43ecc 460 #define MCP23008_SA2 0x44
wim 34:e5a0dcb43ecc 461 #define MCP23008_SA3 0x46
wim 34:e5a0dcb43ecc 462 #define MCP23008_SA4 0x48
wim 34:e5a0dcb43ecc 463 #define MCP23008_SA5 0x4A
wim 34:e5a0dcb43ecc 464 #define MCP23008_SA6 0x4C
wim 34:e5a0dcb43ecc 465 #define MCP23008_SA7 0x4E
wim 34:e5a0dcb43ecc 466
wim 34:e5a0dcb43ecc 467 /* MCP23008 I2C portexpander internal registers */
wim 34:e5a0dcb43ecc 468 #define IODIR 0x00
wim 34:e5a0dcb43ecc 469 #define IPOL 0x01
wim 34:e5a0dcb43ecc 470 #define GPINTEN 0x02
wim 34:e5a0dcb43ecc 471 #define DEFVAL 0x03
wim 34:e5a0dcb43ecc 472 #define INTCON 0x04
wim 34:e5a0dcb43ecc 473 #define IOCON 0x05
wim 34:e5a0dcb43ecc 474 #define GPPU 0x06
wim 34:e5a0dcb43ecc 475 #define INTF 0x07
wim 34:e5a0dcb43ecc 476 #define INTCAP 0x08
wim 34:e5a0dcb43ecc 477 #define GPIO 0x09
wim 34:e5a0dcb43ecc 478 #define OLAT 0x0A
wim 34:e5a0dcb43ecc 479
wim 34:e5a0dcb43ecc 480 /* ST7032i I2C slave address */
wim 34:e5a0dcb43ecc 481 #define ST7032_SA 0x7C
wim 34:e5a0dcb43ecc 482
wim 34:e5a0dcb43ecc 483 /* ST7036i I2C slave address */
wim 34:e5a0dcb43ecc 484 #define ST7036_SA0 0x78
wim 34:e5a0dcb43ecc 485 #define ST7036_SA1 0x7A
wim 34:e5a0dcb43ecc 486 #define ST7036_SA2 0x7C
wim 34:e5a0dcb43ecc 487 #define ST7036_SA3 0x7E
wim 34:e5a0dcb43ecc 488
wim 37:ce348c002929 489 /* ST7066_ACM I2C slave address, Added for ACM1602 module */
wim 37:ce348c002929 490 #define ST7066_SA0 0xA0
wim 37:ce348c002929 491
wim 34:e5a0dcb43ecc 492 /* PCF21XX I2C slave address */
wim 34:e5a0dcb43ecc 493 #define PCF21XX_SA0 0x74
wim 34:e5a0dcb43ecc 494 #define PCF21XX_SA1 0x76
wim 34:e5a0dcb43ecc 495
wim 34:e5a0dcb43ecc 496 /* AIP31068 I2C slave address */
wim 34:e5a0dcb43ecc 497 #define AIP31068_SA 0x7C
wim 34:e5a0dcb43ecc 498
wim 34:e5a0dcb43ecc 499 /* SSD1803 I2C slave address */
wim 34:e5a0dcb43ecc 500 #define SSD1803_SA0 0x78
wim 34:e5a0dcb43ecc 501 #define SSD1803_SA1 0x7A
wim 34:e5a0dcb43ecc 502
wim 34:e5a0dcb43ecc 503 /* US2066/SSD1311 I2C slave address */
wim 34:e5a0dcb43ecc 504 #define US2066_SA0 0x78
wim 34:e5a0dcb43ecc 505 #define US2066_SA1 0x7A
wim 34:e5a0dcb43ecc 506
wim 34:e5a0dcb43ecc 507 /* AC780 I2C slave address */
wim 34:e5a0dcb43ecc 508 #define AC780_SA0 0x78
wim 34:e5a0dcb43ecc 509 #define AC780_SA1 0x7A
wim 34:e5a0dcb43ecc 510 #define AC780_SA2 0x7C
wim 34:e5a0dcb43ecc 511 #define AC780_SA3 0x7E
wim 34:e5a0dcb43ecc 512
wim 34:e5a0dcb43ecc 513 //Some native I2C controllers dont support ACK. Set define to '0' to allow code to proceed even without ACK
wim 34:e5a0dcb43ecc 514 //#define LCD_I2C_ACK 0
wim 34:e5a0dcb43ecc 515 #define LCD_I2C_ACK 1
wim 34:e5a0dcb43ecc 516
wim 34:e5a0dcb43ecc 517
wim 34:e5a0dcb43ecc 518 // Contrast setting, 6 significant bits (only supported for controllers with extended features)
wim 34:e5a0dcb43ecc 519 // Voltage Multiplier setting, 2 or 3 significant bits (only supported for controllers with extended features)
wim 34:e5a0dcb43ecc 520 #define LCD_DEF_CONTRAST 0x20
wim 34:e5a0dcb43ecc 521
wim 34:e5a0dcb43ecc 522 //ST7032 EastRising ERC1602FS-4 display
wim 34:e5a0dcb43ecc 523 //Contrast setting 6 significant bits
wim 34:e5a0dcb43ecc 524 //Voltage Multiplier setting 3 significant bits
wim 37:ce348c002929 525 #define LCD_ST7032_CONTRAST 0x28
wim 34:e5a0dcb43ecc 526 #define LCD_ST7032_RAB 0x04
wim 34:e5a0dcb43ecc 527
wim 34:e5a0dcb43ecc 528 //ST7036 EA DOGM1603 display
wim 34:e5a0dcb43ecc 529 //Contrast setting 6 significant bits
wim 34:e5a0dcb43ecc 530 //Voltage Multiplier setting 3 significant bits
wim 34:e5a0dcb43ecc 531 #define LCD_ST7036_CONTRAST 0x28
wim 34:e5a0dcb43ecc 532 #define LCD_ST7036_RAB 0x04
wim 34:e5a0dcb43ecc 533
wim 34:e5a0dcb43ecc 534 //SSD1803 EA DOGM204 display
wim 34:e5a0dcb43ecc 535 //Contrast setting 6 significant bits
wim 34:e5a0dcb43ecc 536 //Voltage Multiplier setting 3 significant bits
wim 34:e5a0dcb43ecc 537 #define LCD_SSD1_CONTRAST 0x28
wim 34:e5a0dcb43ecc 538 #define LCD_SSD1_RAB 0x06
wim 34:e5a0dcb43ecc 539
wim 34:e5a0dcb43ecc 540 //US2066/SSD1311 EastRising ER-OLEDM2002-4 display
wim 34:e5a0dcb43ecc 541 //Contrast setting 8 significant bits, use 6 for compatibility
wim 34:e5a0dcb43ecc 542 #define LCD_US20_CONTRAST 0x3F
wim 34:e5a0dcb43ecc 543 //#define LCD_US20_CONTRAST 0x1F
wim 34:e5a0dcb43ecc 544
wim 34:e5a0dcb43ecc 545 //PCF2113, PCF2119 display
wim 34:e5a0dcb43ecc 546 //Contrast setting 6 significant bits
wim 34:e5a0dcb43ecc 547 //Voltage Multiplier setting 2 significant bits
wim 34:e5a0dcb43ecc 548 #define LCD_PCF2_CONTRAST 0x20
wim 34:e5a0dcb43ecc 549 #define LCD_PCF2_S12 0x02
wim 34:e5a0dcb43ecc 550
wim 34:e5a0dcb43ecc 551 //PT6314 VFD display
wim 34:e5a0dcb43ecc 552 //Contrast setting 2 significant bits, use 6 for compatibility
wim 34:e5a0dcb43ecc 553 #define LCD_PT63_CONTRAST 0x3F
wim 34:e5a0dcb43ecc 554
wim 34:e5a0dcb43ecc 555
wim 34:e5a0dcb43ecc 556 #endif //MBED_TEXTLCDCONFIG_H