thomas ya
for
Dependents: LV_FGSE_Controller_Interface
TextLCD_Config.h@37:ce348c002929, 2015-03-29 (annotated)
- Committer:
- wim
- Date:
- Sun Mar 29 13:08:03 2015 +0000
- Revision:
- 37:ce348c002929
- Parent:
- 36:9f5f86dfd44a
- Child:
- 38:cbe275b0b647
Cleaned up low level command and data write operations to improve speed of I2C expander versions (PCF8574 and MCP23008). Added initial support for controllers with alternative fonttables.
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| wim | 37:ce348c002929 | 1 | /* mbed TextLCD Library, for LCDs based on HD44780 controllers |
| wim | 34:e5a0dcb43ecc | 2 | * Copyright (c) 2014, WH |
| wim | 34:e5a0dcb43ecc | 3 | * 2014, v01: WH, Extracted from TextLCD.h as of v14 |
| wim | 35:311be6444a39 | 4 | * 2014, v02: WH, Added AC780 support, added I2C expander modules, fixed setBacklight() for inverted logic modules. Fixed bug in LCD_SPI_N define |
| wim | 36:9f5f86dfd44a | 5 | * 2014, v03: WH, Added LCD_SPI_N_3_8 define for ST7070 |
| wim | 37:ce348c002929 | 6 | * 2015, v04: WH, Added support for alternative fonttables (eg PCF21XX) |
| wim | 37:ce348c002929 | 7 | * 2015, v05: WH, Clean up low-level _writeCommand() and _writeData(), Added support for alt fonttables (eg PCF21XX), Added ST7066_ACM for ACM1602 module, fixed contrast for ST7032 |
| wim | 34:e5a0dcb43ecc | 8 | * |
| wim | 34:e5a0dcb43ecc | 9 | * Permission is hereby granted, free of charge, to any person obtaining a copy |
| wim | 34:e5a0dcb43ecc | 10 | * of this software and associated documentation files (the "Software"), to deal |
| wim | 34:e5a0dcb43ecc | 11 | * in the Software without restriction, including without limitation the rights |
| wim | 34:e5a0dcb43ecc | 12 | * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| wim | 34:e5a0dcb43ecc | 13 | * copies of the Software, and to permit persons to whom the Software is |
| wim | 34:e5a0dcb43ecc | 14 | * furnished to do so, subject to the following conditions: |
| wim | 34:e5a0dcb43ecc | 15 | * |
| wim | 34:e5a0dcb43ecc | 16 | * The above copyright notice and this permission notice shall be included in |
| wim | 34:e5a0dcb43ecc | 17 | * all copies or substantial portions of the Software. |
| wim | 34:e5a0dcb43ecc | 18 | * |
| wim | 34:e5a0dcb43ecc | 19 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| wim | 34:e5a0dcb43ecc | 20 | * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| wim | 34:e5a0dcb43ecc | 21 | * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
| wim | 34:e5a0dcb43ecc | 22 | * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| wim | 34:e5a0dcb43ecc | 23 | * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| wim | 34:e5a0dcb43ecc | 24 | * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| wim | 34:e5a0dcb43ecc | 25 | * THE SOFTWARE. |
| wim | 34:e5a0dcb43ecc | 26 | */ |
| wim | 34:e5a0dcb43ecc | 27 | #ifndef MBED_TEXTLCDCONFIG_H |
| wim | 34:e5a0dcb43ecc | 28 | #define MBED_TEXTLCDCONFIG_H |
| wim | 34:e5a0dcb43ecc | 29 | |
| wim | 34:e5a0dcb43ecc | 30 | //Select hardware interface options to reduce memory footprint (multiple options allowed) |
| wim | 34:e5a0dcb43ecc | 31 | #define LCD_I2C 1 /* I2C Expander PCF8574/MCP23008 */ |
| wim | 34:e5a0dcb43ecc | 32 | #define LCD_SPI 1 /* SPI Expander SN74595 */ |
| wim | 34:e5a0dcb43ecc | 33 | #define LCD_I2C_N 1 /* Native I2C bus */ |
| wim | 35:311be6444a39 | 34 | #define LCD_SPI_N 1 /* Native SPI bus */ |
| wim | 36:9f5f86dfd44a | 35 | #define LCD_SPI_N_3_8 1 /* Native SPI bus */ |
| wim | 34:e5a0dcb43ecc | 36 | #define LCD_SPI_N_3_9 1 /* Native SPI bus */ |
| wim | 34:e5a0dcb43ecc | 37 | #define LCD_SPI_N_3_10 1 /* Native SPI bus */ |
| wim | 34:e5a0dcb43ecc | 38 | #define LCD_SPI_N_3_16 1 /* Native SPI bus */ |
| wim | 34:e5a0dcb43ecc | 39 | #define LCD_SPI_N_3_24 1 /* Native SPI bus */ |
| wim | 35:311be6444a39 | 40 | |
| wim | 34:e5a0dcb43ecc | 41 | //Select options to reduce memory footprint (multiple options allowed) |
| wim | 34:e5a0dcb43ecc | 42 | #define LCD_UDC 1 /* Enable predefined UDC example*/ |
| wim | 34:e5a0dcb43ecc | 43 | #define LCD_PRINTF 1 /* Enable Stream implementation */ |
| wim | 34:e5a0dcb43ecc | 44 | |
| wim | 37:ce348c002929 | 45 | //Select option to activate default fonttable or alternatively use conversion for specific controller versions (eg PCF2119C) |
| wim | 37:ce348c002929 | 46 | #define LCD_DEFAULT_FONT 1 |
| wim | 37:ce348c002929 | 47 | |
| wim | 34:e5a0dcb43ecc | 48 | //Pin Defines for I2C PCF8574/PCF8574A or MCP23008 and SPI 74595 bus expander interfaces |
| wim | 37:ce348c002929 | 49 | //Different commercially available LCD portexpanders use different wiring conventions. |
| wim | 37:ce348c002929 | 50 | //LCD and serial portexpanders should be wired according to the tables below. |
| wim | 34:e5a0dcb43ecc | 51 | // |
| wim | 37:ce348c002929 | 52 | //Select Serial Port Expander Hardware module (one option only) |
| wim | 34:e5a0dcb43ecc | 53 | #define DEFAULT 1 |
| wim | 34:e5a0dcb43ecc | 54 | #define ADAFRUIT 0 |
| wim | 34:e5a0dcb43ecc | 55 | #define DFROBOT 0 |
| wim | 35:311be6444a39 | 56 | #define YWROBOT 0 |
| wim | 35:311be6444a39 | 57 | #define GYLCD 0 |
| wim | 35:311be6444a39 | 58 | #define SYDZ 0 |
| wim | 34:e5a0dcb43ecc | 59 | |
| wim | 34:e5a0dcb43ecc | 60 | #if (DEFAULT==1) |
| wim | 34:e5a0dcb43ecc | 61 | //Definitions for default (WH) mapping between serial port expander pins and LCD controller |
| wim | 34:e5a0dcb43ecc | 62 | //This hardware supports the I2C bus expander (PCF8574/PCF8574A or MCP23008) and SPI bus expander (74595) interfaces |
| wim | 34:e5a0dcb43ecc | 63 | //See https://mbed.org/cookbook/Text-LCD-Enhanced |
| wim | 34:e5a0dcb43ecc | 64 | // |
| wim | 34:e5a0dcb43ecc | 65 | //Note: LCD RW pin must be connected to GND |
| wim | 34:e5a0dcb43ecc | 66 | // E2 is used for LCD40x4 (second controller) |
| wim | 34:e5a0dcb43ecc | 67 | // BL may be used to control backlight |
| wim | 34:e5a0dcb43ecc | 68 | #define D_LCD_PIN_D4 0 |
| wim | 34:e5a0dcb43ecc | 69 | #define D_LCD_PIN_D5 1 |
| wim | 34:e5a0dcb43ecc | 70 | #define D_LCD_PIN_D6 2 |
| wim | 34:e5a0dcb43ecc | 71 | #define D_LCD_PIN_D7 3 |
| wim | 34:e5a0dcb43ecc | 72 | #define D_LCD_PIN_RS 4 |
| wim | 34:e5a0dcb43ecc | 73 | #define D_LCD_PIN_E 5 |
| wim | 34:e5a0dcb43ecc | 74 | #define D_LCD_PIN_E2 6 |
| wim | 34:e5a0dcb43ecc | 75 | #define D_LCD_PIN_BL 7 |
| wim | 34:e5a0dcb43ecc | 76 | |
| wim | 34:e5a0dcb43ecc | 77 | #define D_LCD_PIN_RW D_LCD_PIN_E2 |
| wim | 34:e5a0dcb43ecc | 78 | |
| wim | 34:e5a0dcb43ecc | 79 | //Select I2C Portexpander type (one option only) |
| wim | 34:e5a0dcb43ecc | 80 | #define PCF8574 1 |
| wim | 34:e5a0dcb43ecc | 81 | #define MCP23008 0 |
| wim | 35:311be6444a39 | 82 | |
| wim | 35:311be6444a39 | 83 | //Inverted Backlight control |
| wim | 35:311be6444a39 | 84 | #define BACKLIGHT_INV 0 |
| wim | 34:e5a0dcb43ecc | 85 | #endif |
| wim | 34:e5a0dcb43ecc | 86 | |
| wim | 34:e5a0dcb43ecc | 87 | #if (ADAFRUIT==1) |
| wim | 34:e5a0dcb43ecc | 88 | //Definitions for Adafruit i2cspilcdbackpack mapping between serial port expander pins and LCD controller |
| wim | 34:e5a0dcb43ecc | 89 | //This hardware supports both an I2C expander (MCP23008) and an SPI expander (74595) selectable by a jumper. |
| wim | 35:311be6444a39 | 90 | //Slaveaddress may be set by solderbridges (default 0x40). SDA/SCL has pullup Resistors onboard. |
| wim | 34:e5a0dcb43ecc | 91 | //See http://www.ladyada.net/products/i2cspilcdbackpack |
| wim | 34:e5a0dcb43ecc | 92 | // |
| wim | 34:e5a0dcb43ecc | 93 | //Note: LCD RW pin must be kept LOW |
| wim | 34:e5a0dcb43ecc | 94 | // E2 is not available on this hardware and so it does not support LCD40x4 (second controller) |
| wim | 34:e5a0dcb43ecc | 95 | // BL is used to control backlight |
| wim | 34:e5a0dcb43ecc | 96 | #define D_LCD_PIN_0 0 |
| wim | 34:e5a0dcb43ecc | 97 | #define D_LCD_PIN_RS 1 |
| wim | 34:e5a0dcb43ecc | 98 | #define D_LCD_PIN_E 2 |
| wim | 34:e5a0dcb43ecc | 99 | #define D_LCD_PIN_D4 3 |
| wim | 34:e5a0dcb43ecc | 100 | #define D_LCD_PIN_D5 4 |
| wim | 34:e5a0dcb43ecc | 101 | #define D_LCD_PIN_D6 5 |
| wim | 34:e5a0dcb43ecc | 102 | #define D_LCD_PIN_D7 6 |
| wim | 34:e5a0dcb43ecc | 103 | #define D_LCD_PIN_BL 7 |
| wim | 34:e5a0dcb43ecc | 104 | |
| wim | 34:e5a0dcb43ecc | 105 | #define D_LCD_PIN_E2 D_LCD_PIN_0 |
| wim | 34:e5a0dcb43ecc | 106 | |
| wim | 34:e5a0dcb43ecc | 107 | //Force I2C portexpander type |
| wim | 34:e5a0dcb43ecc | 108 | #define PCF8574 0 |
| wim | 34:e5a0dcb43ecc | 109 | #define MCP23008 1 |
| wim | 35:311be6444a39 | 110 | |
| wim | 35:311be6444a39 | 111 | //Inverted Backlight control |
| wim | 35:311be6444a39 | 112 | #define BACKLIGHT_INV 0 |
| wim | 34:e5a0dcb43ecc | 113 | #endif |
| wim | 34:e5a0dcb43ecc | 114 | |
| wim | 34:e5a0dcb43ecc | 115 | #if (DFROBOT==1) |
| wim | 34:e5a0dcb43ecc | 116 | //Definitions for DFROBOT LCD2004 Module mapping between serial port expander pins and LCD controller |
| wim | 34:e5a0dcb43ecc | 117 | //This hardware uses PCF8574 and is different from earlier/different Arduino I2C LCD displays |
| wim | 35:311be6444a39 | 118 | //Slaveaddress hardwired to 0x4E. SDA/SCL has pullup Resistors onboard. |
| wim | 35:311be6444a39 | 119 | //See http://arduino-info.wikispaces.com/LCD-Blue-I2C |
| wim | 35:311be6444a39 | 120 | // |
| wim | 35:311be6444a39 | 121 | //Definitions for DFROBOT V1.1 |
| wim | 35:311be6444a39 | 122 | //This hardware uses PCF8574. Slaveaddress may be set by jumpers (default 0x40). |
| wim | 35:311be6444a39 | 123 | //SDA/SCL has pullup Resistors onboard and features a voltage level converter 3V3 <-> 5V. |
| wim | 35:311be6444a39 | 124 | //See http://www.dfrobot.com/index.php?route=product/product&product_id=135 |
| wim | 35:311be6444a39 | 125 | // |
| wim | 35:311be6444a39 | 126 | // |
| wim | 35:311be6444a39 | 127 | //Note: LCD RW pin must be kept LOW |
| wim | 35:311be6444a39 | 128 | // E2 is not available on default Arduino hardware and so it does not support LCD40x4 (second controller) |
| wim | 35:311be6444a39 | 129 | // BL is used to control backlight |
| wim | 35:311be6444a39 | 130 | #define D_LCD_PIN_RS 0 |
| wim | 35:311be6444a39 | 131 | #define D_LCD_PIN_RW 1 |
| wim | 35:311be6444a39 | 132 | #define D_LCD_PIN_E 2 |
| wim | 35:311be6444a39 | 133 | #define D_LCD_PIN_BL 3 |
| wim | 35:311be6444a39 | 134 | #define D_LCD_PIN_D4 4 |
| wim | 35:311be6444a39 | 135 | #define D_LCD_PIN_D5 5 |
| wim | 35:311be6444a39 | 136 | #define D_LCD_PIN_D6 6 |
| wim | 35:311be6444a39 | 137 | #define D_LCD_PIN_D7 7 |
| wim | 35:311be6444a39 | 138 | |
| wim | 35:311be6444a39 | 139 | #define D_LCD_PIN_E2 D_LCD_PIN_RW |
| wim | 35:311be6444a39 | 140 | |
| wim | 35:311be6444a39 | 141 | //Force I2C portexpander type |
| wim | 35:311be6444a39 | 142 | #define PCF8574 1 |
| wim | 35:311be6444a39 | 143 | #define MCP23008 0 |
| wim | 35:311be6444a39 | 144 | |
| wim | 35:311be6444a39 | 145 | //Inverted Backlight control |
| wim | 35:311be6444a39 | 146 | #define BACKLIGHT_INV 0 |
| wim | 35:311be6444a39 | 147 | #endif |
| wim | 35:311be6444a39 | 148 | |
| wim | 35:311be6444a39 | 149 | #if (YWROBOT==1) |
| wim | 35:311be6444a39 | 150 | //Definitions for YWROBOT LCM1602 V1 Module mapping between serial port expander pins and LCD controller. |
| wim | 35:311be6444a39 | 151 | //Very similar to DFROBOT. This hardware uses PCF8574. |
| wim | 35:311be6444a39 | 152 | //Slaveaddress may be set by solderbridges (default 0x4E). SDA/SCL has no pullup Resistors onboard. |
| wim | 34:e5a0dcb43ecc | 153 | //See http://arduino-info.wikispaces.com/LCD-Blue-I2C |
| wim | 34:e5a0dcb43ecc | 154 | // |
| wim | 34:e5a0dcb43ecc | 155 | //Note: LCD RW pin must be kept LOW |
| wim | 35:311be6444a39 | 156 | // E2 is not available on default hardware and so it does not support LCD40x4 (second controller) |
| wim | 34:e5a0dcb43ecc | 157 | // BL is used to control backlight, reverse logic: Low turns on Backlight. This is handled in setBacklight() |
| wim | 34:e5a0dcb43ecc | 158 | #define D_LCD_PIN_RS 0 |
| wim | 34:e5a0dcb43ecc | 159 | #define D_LCD_PIN_RW 1 |
| wim | 34:e5a0dcb43ecc | 160 | #define D_LCD_PIN_E 2 |
| wim | 34:e5a0dcb43ecc | 161 | #define D_LCD_PIN_BL 3 |
| wim | 34:e5a0dcb43ecc | 162 | #define D_LCD_PIN_D4 4 |
| wim | 34:e5a0dcb43ecc | 163 | #define D_LCD_PIN_D5 5 |
| wim | 34:e5a0dcb43ecc | 164 | #define D_LCD_PIN_D6 6 |
| wim | 34:e5a0dcb43ecc | 165 | #define D_LCD_PIN_D7 7 |
| wim | 34:e5a0dcb43ecc | 166 | |
| wim | 34:e5a0dcb43ecc | 167 | #define D_LCD_PIN_E2 D_LCD_PIN_RW |
| wim | 34:e5a0dcb43ecc | 168 | |
| wim | 34:e5a0dcb43ecc | 169 | //Force I2C portexpander type |
| wim | 34:e5a0dcb43ecc | 170 | #define PCF8574 1 |
| wim | 34:e5a0dcb43ecc | 171 | #define MCP23008 0 |
| wim | 35:311be6444a39 | 172 | |
| wim | 35:311be6444a39 | 173 | //Inverted Backlight control |
| wim | 35:311be6444a39 | 174 | #define BACKLIGHT_INV 0 |
| wim | 34:e5a0dcb43ecc | 175 | #endif |
| wim | 34:e5a0dcb43ecc | 176 | |
| wim | 35:311be6444a39 | 177 | #if (GYLCD==1) |
| wim | 35:311be6444a39 | 178 | //Definitions for Arduino-IIC-LCD GY-LCD-V1 Module mapping between serial port expander pins and LCD controller. |
| wim | 35:311be6444a39 | 179 | //Very similar to DFROBOT. This hardware uses PCF8574. |
| wim | 35:311be6444a39 | 180 | //Slaveaddress may be set by solderbridges (default 0x4E). SDA/SCL has pullup Resistors onboard. |
| wim | 35:311be6444a39 | 181 | //See http://arduino-info.wikispaces.com/LCD-Blue-I2C |
| wim | 35:311be6444a39 | 182 | // |
| wim | 35:311be6444a39 | 183 | //Note: LCD RW pin must be kept LOW |
| wim | 35:311be6444a39 | 184 | // E2 is not available on default hardware and so it does not support LCD40x4 (second controller) |
| wim | 35:311be6444a39 | 185 | // BL is used to control backlight, reverse logic: Low turns on Backlight. This is handled in setBacklight() |
| wim | 35:311be6444a39 | 186 | #define D_LCD_PIN_D4 0 |
| wim | 35:311be6444a39 | 187 | #define D_LCD_PIN_D5 1 |
| wim | 35:311be6444a39 | 188 | #define D_LCD_PIN_D6 2 |
| wim | 35:311be6444a39 | 189 | #define D_LCD_PIN_D7 3 |
| wim | 35:311be6444a39 | 190 | #define D_LCD_PIN_EN 4 |
| wim | 35:311be6444a39 | 191 | #define D_LCD_PIN_RW 5 |
| wim | 35:311be6444a39 | 192 | #define D_LCD_PIN_RS 6 |
| wim | 35:311be6444a39 | 193 | #define D_LCD_PIN_BL 7 |
| wim | 35:311be6444a39 | 194 | |
| wim | 35:311be6444a39 | 195 | #define D_LCD_PIN_E2 D_LCD_PIN_RW |
| wim | 35:311be6444a39 | 196 | |
| wim | 35:311be6444a39 | 197 | //Force I2C portexpander type |
| wim | 35:311be6444a39 | 198 | #define PCF8574 1 |
| wim | 35:311be6444a39 | 199 | #define MCP23008 0 |
| wim | 35:311be6444a39 | 200 | |
| wim | 35:311be6444a39 | 201 | //Force Inverted Backlight control |
| wim | 35:311be6444a39 | 202 | #define BACKLIGHT_INV 1 |
| wim | 35:311be6444a39 | 203 | #endif |
| wim | 35:311be6444a39 | 204 | |
| wim | 35:311be6444a39 | 205 | #if (SYDZ==1) |
| wim | 35:311be6444a39 | 206 | //Definitions for SYDZ Module mapping between serial port expander pins and LCD controller. |
| wim | 35:311be6444a39 | 207 | //Very similar to DFROBOT. This hardware uses PCF8574A and uses inverted Backlight control |
| wim | 35:311be6444a39 | 208 | //Slaveaddress may be set by switches (default 0x40). SDA/SCL has pullup Resistors onboard. |
| wim | 35:311be6444a39 | 209 | //See ebay |
| wim | 35:311be6444a39 | 210 | // |
| wim | 35:311be6444a39 | 211 | //Note: LCD RW pin must be kept LOW |
| wim | 35:311be6444a39 | 212 | // E2 is not available on default hardware and so it does not support LCD40x4 (second controller) |
| wim | 35:311be6444a39 | 213 | // BL is used to control backlight, reverse logic: Low turns on Backlight. This is handled in setBacklight() |
| wim | 35:311be6444a39 | 214 | #define D_LCD_PIN_RS 0 |
| wim | 35:311be6444a39 | 215 | #define D_LCD_PIN_RW 1 |
| wim | 35:311be6444a39 | 216 | #define D_LCD_PIN_E 2 |
| wim | 35:311be6444a39 | 217 | #define D_LCD_PIN_BL 3 |
| wim | 35:311be6444a39 | 218 | #define D_LCD_PIN_D4 4 |
| wim | 35:311be6444a39 | 219 | #define D_LCD_PIN_D5 5 |
| wim | 35:311be6444a39 | 220 | #define D_LCD_PIN_D6 6 |
| wim | 35:311be6444a39 | 221 | #define D_LCD_PIN_D7 7 |
| wim | 35:311be6444a39 | 222 | |
| wim | 35:311be6444a39 | 223 | #define D_LCD_PIN_E2 D_LCD_PIN_RW |
| wim | 35:311be6444a39 | 224 | |
| wim | 35:311be6444a39 | 225 | //Force I2C portexpander type |
| wim | 35:311be6444a39 | 226 | #define PCF8574 1 |
| wim | 35:311be6444a39 | 227 | #define MCP23008 0 |
| wim | 35:311be6444a39 | 228 | |
| wim | 35:311be6444a39 | 229 | //Force Inverted Backlight control |
| wim | 35:311be6444a39 | 230 | #define BACKLIGHT_INV 1 |
| wim | 35:311be6444a39 | 231 | #endif |
| wim | 34:e5a0dcb43ecc | 232 | |
| wim | 34:e5a0dcb43ecc | 233 | //Bitpattern Defines for I2C PCF8574/PCF8574A, MCP23008 and SPI 74595 Bus expanders |
| wim | 37:ce348c002929 | 234 | //Don't change! |
| wim | 34:e5a0dcb43ecc | 235 | // |
| wim | 34:e5a0dcb43ecc | 236 | #define D_LCD_D4 (1<<D_LCD_PIN_D4) |
| wim | 34:e5a0dcb43ecc | 237 | #define D_LCD_D5 (1<<D_LCD_PIN_D5) |
| wim | 34:e5a0dcb43ecc | 238 | #define D_LCD_D6 (1<<D_LCD_PIN_D6) |
| wim | 34:e5a0dcb43ecc | 239 | #define D_LCD_D7 (1<<D_LCD_PIN_D7) |
| wim | 34:e5a0dcb43ecc | 240 | #define D_LCD_RS (1<<D_LCD_PIN_RS) |
| wim | 34:e5a0dcb43ecc | 241 | #define D_LCD_E (1<<D_LCD_PIN_E) |
| wim | 34:e5a0dcb43ecc | 242 | #define D_LCD_E2 (1<<D_LCD_PIN_E2) |
| wim | 34:e5a0dcb43ecc | 243 | #define D_LCD_BL (1<<D_LCD_PIN_BL) |
| wim | 34:e5a0dcb43ecc | 244 | //#define D_LCD_RW (1<<D_LCD_PIN_RW) |
| wim | 34:e5a0dcb43ecc | 245 | |
| wim | 34:e5a0dcb43ecc | 246 | #define D_LCD_BUS_MSK (D_LCD_D4 | D_LCD_D5 | D_LCD_D6 | D_LCD_D7) |
| wim | 34:e5a0dcb43ecc | 247 | #define D_LCD_BUS_DEF 0x00 |
| wim | 34:e5a0dcb43ecc | 248 | |
| wim | 34:e5a0dcb43ecc | 249 | /* PCF8574/PCF8574A I2C portexpander slave address */ |
| wim | 34:e5a0dcb43ecc | 250 | #define PCF8574_SA0 0x40 |
| wim | 34:e5a0dcb43ecc | 251 | #define PCF8574_SA1 0x42 |
| wim | 34:e5a0dcb43ecc | 252 | #define PCF8574_SA2 0x44 |
| wim | 34:e5a0dcb43ecc | 253 | #define PCF8574_SA3 0x46 |
| wim | 34:e5a0dcb43ecc | 254 | #define PCF8574_SA4 0x48 |
| wim | 34:e5a0dcb43ecc | 255 | #define PCF8574_SA5 0x4A |
| wim | 34:e5a0dcb43ecc | 256 | #define PCF8574_SA6 0x4C |
| wim | 34:e5a0dcb43ecc | 257 | #define PCF8574_SA7 0x4E |
| wim | 34:e5a0dcb43ecc | 258 | |
| wim | 34:e5a0dcb43ecc | 259 | #define PCF8574A_SA0 0x70 |
| wim | 34:e5a0dcb43ecc | 260 | #define PCF8574A_SA1 0x72 |
| wim | 34:e5a0dcb43ecc | 261 | #define PCF8574A_SA2 0x74 |
| wim | 34:e5a0dcb43ecc | 262 | #define PCF8574A_SA3 0x76 |
| wim | 34:e5a0dcb43ecc | 263 | #define PCF8574A_SA4 0x78 |
| wim | 34:e5a0dcb43ecc | 264 | #define PCF8574A_SA5 0x7A |
| wim | 34:e5a0dcb43ecc | 265 | #define PCF8574A_SA6 0x7C |
| wim | 34:e5a0dcb43ecc | 266 | #define PCF8574A_SA7 0x7E |
| wim | 34:e5a0dcb43ecc | 267 | |
| wim | 34:e5a0dcb43ecc | 268 | /* MCP23008 I2C portexpander slave address */ |
| wim | 34:e5a0dcb43ecc | 269 | #define MCP23008_SA0 0x40 |
| wim | 34:e5a0dcb43ecc | 270 | #define MCP23008_SA1 0x42 |
| wim | 34:e5a0dcb43ecc | 271 | #define MCP23008_SA2 0x44 |
| wim | 34:e5a0dcb43ecc | 272 | #define MCP23008_SA3 0x46 |
| wim | 34:e5a0dcb43ecc | 273 | #define MCP23008_SA4 0x48 |
| wim | 34:e5a0dcb43ecc | 274 | #define MCP23008_SA5 0x4A |
| wim | 34:e5a0dcb43ecc | 275 | #define MCP23008_SA6 0x4C |
| wim | 34:e5a0dcb43ecc | 276 | #define MCP23008_SA7 0x4E |
| wim | 34:e5a0dcb43ecc | 277 | |
| wim | 34:e5a0dcb43ecc | 278 | /* MCP23008 I2C portexpander internal registers */ |
| wim | 34:e5a0dcb43ecc | 279 | #define IODIR 0x00 |
| wim | 34:e5a0dcb43ecc | 280 | #define IPOL 0x01 |
| wim | 34:e5a0dcb43ecc | 281 | #define GPINTEN 0x02 |
| wim | 34:e5a0dcb43ecc | 282 | #define DEFVAL 0x03 |
| wim | 34:e5a0dcb43ecc | 283 | #define INTCON 0x04 |
| wim | 34:e5a0dcb43ecc | 284 | #define IOCON 0x05 |
| wim | 34:e5a0dcb43ecc | 285 | #define GPPU 0x06 |
| wim | 34:e5a0dcb43ecc | 286 | #define INTF 0x07 |
| wim | 34:e5a0dcb43ecc | 287 | #define INTCAP 0x08 |
| wim | 34:e5a0dcb43ecc | 288 | #define GPIO 0x09 |
| wim | 34:e5a0dcb43ecc | 289 | #define OLAT 0x0A |
| wim | 34:e5a0dcb43ecc | 290 | |
| wim | 34:e5a0dcb43ecc | 291 | /* ST7032i I2C slave address */ |
| wim | 34:e5a0dcb43ecc | 292 | #define ST7032_SA 0x7C |
| wim | 34:e5a0dcb43ecc | 293 | |
| wim | 34:e5a0dcb43ecc | 294 | /* ST7036i I2C slave address */ |
| wim | 34:e5a0dcb43ecc | 295 | #define ST7036_SA0 0x78 |
| wim | 34:e5a0dcb43ecc | 296 | #define ST7036_SA1 0x7A |
| wim | 34:e5a0dcb43ecc | 297 | #define ST7036_SA2 0x7C |
| wim | 34:e5a0dcb43ecc | 298 | #define ST7036_SA3 0x7E |
| wim | 34:e5a0dcb43ecc | 299 | |
| wim | 37:ce348c002929 | 300 | /* ST7066_ACM I2C slave address, Added for ACM1602 module */ |
| wim | 37:ce348c002929 | 301 | #define ST7066_SA0 0xA0 |
| wim | 37:ce348c002929 | 302 | |
| wim | 34:e5a0dcb43ecc | 303 | /* PCF21XX I2C slave address */ |
| wim | 34:e5a0dcb43ecc | 304 | #define PCF21XX_SA0 0x74 |
| wim | 34:e5a0dcb43ecc | 305 | #define PCF21XX_SA1 0x76 |
| wim | 34:e5a0dcb43ecc | 306 | |
| wim | 34:e5a0dcb43ecc | 307 | /* AIP31068 I2C slave address */ |
| wim | 34:e5a0dcb43ecc | 308 | #define AIP31068_SA 0x7C |
| wim | 34:e5a0dcb43ecc | 309 | |
| wim | 34:e5a0dcb43ecc | 310 | /* SSD1803 I2C slave address */ |
| wim | 34:e5a0dcb43ecc | 311 | #define SSD1803_SA0 0x78 |
| wim | 34:e5a0dcb43ecc | 312 | #define SSD1803_SA1 0x7A |
| wim | 34:e5a0dcb43ecc | 313 | |
| wim | 34:e5a0dcb43ecc | 314 | /* US2066/SSD1311 I2C slave address */ |
| wim | 34:e5a0dcb43ecc | 315 | #define US2066_SA0 0x78 |
| wim | 34:e5a0dcb43ecc | 316 | #define US2066_SA1 0x7A |
| wim | 34:e5a0dcb43ecc | 317 | |
| wim | 34:e5a0dcb43ecc | 318 | /* AC780 I2C slave address */ |
| wim | 34:e5a0dcb43ecc | 319 | #define AC780_SA0 0x78 |
| wim | 34:e5a0dcb43ecc | 320 | #define AC780_SA1 0x7A |
| wim | 34:e5a0dcb43ecc | 321 | #define AC780_SA2 0x7C |
| wim | 34:e5a0dcb43ecc | 322 | #define AC780_SA3 0x7E |
| wim | 34:e5a0dcb43ecc | 323 | |
| wim | 34:e5a0dcb43ecc | 324 | //Some native I2C controllers dont support ACK. Set define to '0' to allow code to proceed even without ACK |
| wim | 34:e5a0dcb43ecc | 325 | //#define LCD_I2C_ACK 0 |
| wim | 34:e5a0dcb43ecc | 326 | #define LCD_I2C_ACK 1 |
| wim | 34:e5a0dcb43ecc | 327 | |
| wim | 34:e5a0dcb43ecc | 328 | |
| wim | 34:e5a0dcb43ecc | 329 | // Contrast setting, 6 significant bits (only supported for controllers with extended features) |
| wim | 34:e5a0dcb43ecc | 330 | // Voltage Multiplier setting, 2 or 3 significant bits (only supported for controllers with extended features) |
| wim | 34:e5a0dcb43ecc | 331 | #define LCD_DEF_CONTRAST 0x20 |
| wim | 34:e5a0dcb43ecc | 332 | |
| wim | 34:e5a0dcb43ecc | 333 | //ST7032 EastRising ERC1602FS-4 display |
| wim | 34:e5a0dcb43ecc | 334 | //Contrast setting 6 significant bits |
| wim | 34:e5a0dcb43ecc | 335 | //Voltage Multiplier setting 3 significant bits |
| wim | 37:ce348c002929 | 336 | #define LCD_ST7032_CONTRAST 0x28 |
| wim | 34:e5a0dcb43ecc | 337 | #define LCD_ST7032_RAB 0x04 |
| wim | 34:e5a0dcb43ecc | 338 | |
| wim | 34:e5a0dcb43ecc | 339 | //ST7036 EA DOGM1603 display |
| wim | 34:e5a0dcb43ecc | 340 | //Contrast setting 6 significant bits |
| wim | 34:e5a0dcb43ecc | 341 | //Voltage Multiplier setting 3 significant bits |
| wim | 34:e5a0dcb43ecc | 342 | #define LCD_ST7036_CONTRAST 0x28 |
| wim | 34:e5a0dcb43ecc | 343 | #define LCD_ST7036_RAB 0x04 |
| wim | 34:e5a0dcb43ecc | 344 | |
| wim | 34:e5a0dcb43ecc | 345 | //SSD1803 EA DOGM204 display |
| wim | 34:e5a0dcb43ecc | 346 | //Contrast setting 6 significant bits |
| wim | 34:e5a0dcb43ecc | 347 | //Voltage Multiplier setting 3 significant bits |
| wim | 34:e5a0dcb43ecc | 348 | #define LCD_SSD1_CONTRAST 0x28 |
| wim | 34:e5a0dcb43ecc | 349 | #define LCD_SSD1_RAB 0x06 |
| wim | 34:e5a0dcb43ecc | 350 | |
| wim | 34:e5a0dcb43ecc | 351 | //US2066/SSD1311 EastRising ER-OLEDM2002-4 display |
| wim | 34:e5a0dcb43ecc | 352 | //Contrast setting 8 significant bits, use 6 for compatibility |
| wim | 34:e5a0dcb43ecc | 353 | #define LCD_US20_CONTRAST 0x3F |
| wim | 34:e5a0dcb43ecc | 354 | //#define LCD_US20_CONTRAST 0x1F |
| wim | 34:e5a0dcb43ecc | 355 | |
| wim | 34:e5a0dcb43ecc | 356 | //PCF2113, PCF2119 display |
| wim | 34:e5a0dcb43ecc | 357 | //Contrast setting 6 significant bits |
| wim | 34:e5a0dcb43ecc | 358 | //Voltage Multiplier setting 2 significant bits |
| wim | 34:e5a0dcb43ecc | 359 | #define LCD_PCF2_CONTRAST 0x20 |
| wim | 34:e5a0dcb43ecc | 360 | #define LCD_PCF2_S12 0x02 |
| wim | 34:e5a0dcb43ecc | 361 | |
| wim | 34:e5a0dcb43ecc | 362 | //PT6314 VFD display |
| wim | 34:e5a0dcb43ecc | 363 | //Contrast setting 2 significant bits, use 6 for compatibility |
| wim | 34:e5a0dcb43ecc | 364 | #define LCD_PT63_CONTRAST 0x3F |
| wim | 34:e5a0dcb43ecc | 365 | |
| wim | 34:e5a0dcb43ecc | 366 | |
| wim | 34:e5a0dcb43ecc | 367 | #endif //MBED_TEXTLCDCONFIG_H |