Opencv 3.1 project on GR-PEACH board
Fork of gr-peach-opencv-project by
GR-PEACH_video/inc/lcd_gr_peach_ch0.h
- Committer:
- thedo
- Date:
- 2017-07-04
- Revision:
- 170:54ff26da7eb6
- Parent:
- 166:3a9487d57a5c
File content as of revision 170:54ff26da7eb6:
/******************************************************************************* * DISCLAIMER * This software is supplied by Renesas Electronics Corporation and is only * intended for use with Renesas products. No other uses are authorized. This * software is owned by Renesas Electronics Corporation and is protected under * all applicable laws, including copyright laws. * THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING * THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT * LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE * AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED. * TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS * ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE * FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR * ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE * BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. * Renesas reserves the right, without notice, to make changes to this software * and to discontinue the availability of this software. By using this software, * you agree to the additional terms and conditions found by accessing the * following link: * http://www.renesas.com/disclaimer * Copyright (C) 2012 - 2015 Renesas Electronics Corporation. All rights reserved. *******************************************************************************/ /**************************************************************************//** * @file lcd_gr_peach_ch0.h * @version 1.00 * $Rev: 199 $ * $Date:: 2014-05-23 16:33:52 +0900#$ * @brief LCD panel for vdc5 channel 0 definition header ******************************************************************************/ #ifndef LCD_GR_PEACH_CH0_H #define LCD_GR_PEACH_CH0_H #ifndef LCD_PANEL_H #error Do not include this file directly! #else /****************************************************************************** Includes <System Includes> , "Project Includes" ******************************************************************************/ #include <stdlib.h> #include "r_typedefs.h" #include "r_vdc5.h" /****************************************************************************** Macro definitions ******************************************************************************/ /* Not support */ #define LCD_CH0_DISP_HS (128u) /* LCD display area size, horizontal start position */ #define LCD_CH0_DISP_HW (800u) /* LCD display area size, horizontal width */ #define LCD_CH0_DISP_VS (10u) /* LCD display area size, vertical start position */ #define LCD_CH0_DISP_VW (480u) /* LCD display area size, height (vertical width) */ #define LCD_CH0_SIG_FV (525u - 1u) /* Free-running Vsync period */ #define LCD_CH0_SIG_FH (1056u - 1u) /* Hsync period */ /* Pixel data is latched in the falling edge of pixel clock. Therefore, pixel data should be output from VDC5 at the rising edge of the clock. */ #define LCD_CH0_OUT_EDGE VDC5_EDGE_RISING /* Output phase control of LCD_DATA[23:0] signal */ #define LCD_CH0_OUT_FORMAT VDC5_LCD_OUTFORMAT_RGB666 /* LCD output format select */ #define LCD_CH0_PANEL_CLK VDC5_PANEL_ICKSEL_PERI /* Panel clock select */ #define LCD_CH0_PANEL_CLK_DIV VDC5_PANEL_CLKDIV_1_2 /* Panel clock frequency division ratio */ #define LCD_CH0_TCON_HALF (LCD_CH0_SIG_FH / 2u) /* TCON reference timing, 1/2fH timing */ #define LCD_CH0_TCON_OFFSET (0u) /* TCON reference timing, offset Hsync signal timing */ /****************************************************************************** Typedef definitions ******************************************************************************/ /****************************************************************************** Exported global functions (to be accessed by other files) ******************************************************************************/ void GRAPHICS_SetLcdPanel_Ch0(void); void GRAPHICS_SetLcdTconSettings_Ch0(const vdc5_lcd_tcon_timing_t * * const outctrl); #endif /* LCD_PANEL_H not defined */ #endif /* LCD_GR_PEACH_CH0_H */