Opencv 3.1 project on GR-PEACH board

Fork of gr-peach-opencv-project by the do

Revision:
151:5eaa88a5bcc7
Parent:
150:02e0a0aed4ec
Child:
152:9a67f0b066fc
--- a/targets/targets.json	Tue Nov 08 17:45:16 2016 +0000
+++ b/targets/targets.json	Thu Nov 24 17:03:03 2016 +0000
@@ -815,8 +815,8 @@
         "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
         "inherits": ["Target"],
         "macros": ["TRANSACTION_QUEUE_SIZE_SPI=2"],
-        "detect_code": ["0740"],
-        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES", "TRNG"],
+        "detect_code": ["0744"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES", "TRNG"],
         "release_versions": ["2", "5"],
         "device_name": "STM32F410RB"
     },
@@ -1156,7 +1156,7 @@
         "inherits": ["Target"],
         "macros": ["TRANSACTION_QUEUE_SIZE_SPI=2"],
         "detect_code": ["0788"],
-        "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES", "TRNG"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_RED", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES", "TRNG"],
         "release_versions": ["2", "5"],
         "device_name": "STM32F469NI"
     },
@@ -2355,7 +2355,7 @@
         "is_disk_virtual": true,
         "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
         "inherits": ["Target"],
-        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "TRNG", "CAN"],
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "STDIO_MESSAGES", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "TRNG", "CAN"],
         "features": ["LWIP"],
         "release_versions": ["5"],
         "device_name": "NUC472HI8AE"
@@ -2364,6 +2364,32 @@
         "inherits": ["Target"],
         "core": "Cortex-M3",
         "extra_labels": ["ONSEMI"],
+        "config": {
+            "mac-addr-low": {
+                "help": "Lower 32 bits of the MAC extended address. All FFs indicates that factory programmed MAC address shall be used. In order to override the factory programmed MAC address this value needs to be changed from 0xFFFFFFFF to any chosen value.",
+                "value": "0xFFFFFFFF"
+            },
+            "mac-addr-high": {
+                "help": "Higher 32 bits of the MAC extended address. All FFs indicates that factory programmed MAC address shall be used. In order to override the factory programmed MAC address this value needs to be changed from 0xFFFFFFFF to any chosen value.",
+                "value": "0xFFFFFFFF"
+            },
+            "32KHz-clk-trim": {
+                "help": "32KHz clock trim",
+                "value": "0x39"
+            },
+            "32MHz-clk-trim": {
+                "help": "32MHz clock trim",
+                "value": "0x17"
+            },
+            "rssi-trim": {
+                "help": "RSSI trim",
+                "value": "0x3D"
+            },
+            "txtune-trim": {
+                "help": "TX tune trim",
+                "value": "0xFFFFFFFF"
+            }
+        },
         "post_binary_hook": {"function": "NCS36510TargetCode.ncs36510_addfib"},
         "macros": ["CM3", "CPU_NCS36510", "TARGET_NCS36510", "LOAD_ADDRESS=0x3000"],
         "supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
@@ -2379,7 +2405,7 @@
         "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
         "inherits": ["Target"],
         "progen": {"target": "numaker-pfm-m453"},
-        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "CAN"],
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "STDIO_MESSAGES", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "CAN"],
         "release_versions": ["2", "5"],
         "device_name": "M453VG6AE"
     },