Opencv 3.1 project on GR-PEACH board
Fork of gr-peach-opencv-project by
Diff: platform/mbed_board.c
- Revision:
- 167:1657b442184c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/platform/mbed_board.c Thu Jun 29 11:01:39 2017 +0000 @@ -0,0 +1,104 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include <stdio.h> +#include "hal/gpio_api.h" +#include "platform/mbed_wait_api.h" +#include "platform/mbed_toolchain.h" +#include "platform/mbed_interface.h" +#include "platform/mbed_critical.h" +#include "hal/serial_api.h" + +#if DEVICE_SERIAL +extern int stdio_uart_inited; +extern serial_t stdio_uart; +#endif + +WEAK void mbed_die(void) { +#if !defined (NRF51_H) && !defined(TARGET_EFM32) + core_util_critical_section_enter(); +#endif +#if (DEVICE_ERROR_RED == 1) + gpio_t led_red; gpio_init_out(&led_red, LED_RED); +#elif (DEVICE_ERROR_PATTERN == 1) + gpio_t led_1; gpio_init_out(&led_1, LED1); + gpio_t led_2; gpio_init_out(&led_2, LED2); + gpio_t led_3; gpio_init_out(&led_3, LED3); + gpio_t led_4; gpio_init_out(&led_4, LED4); +#endif + + while (1) { +#if (DEVICE_ERROR_RED == 1) + gpio_write(&led_red, 1); + +#elif (DEVICE_ERROR_PATTERN == 1) + gpio_write(&led_1, 1); + gpio_write(&led_2, 0); + gpio_write(&led_3, 0); + gpio_write(&led_4, 1); +#endif + + wait_ms(150); + +#if (DEVICE_ERROR_RED == 1) + gpio_write(&led_red, 0); + +#elif (DEVICE_ERROR_PATTERN == 1) + gpio_write(&led_1, 0); + gpio_write(&led_2, 1); + gpio_write(&led_3, 1); + gpio_write(&led_4, 0); +#endif + + wait_ms(150); + } +} + +void mbed_error_printf(const char* format, ...) { + va_list arg; + va_start(arg, format); + mbed_error_vfprintf(format, arg); + va_end(arg); +} + +void mbed_error_vfprintf(const char * format, va_list arg) { +#if DEVICE_SERIAL +#define ERROR_BUF_SIZE (128) + core_util_critical_section_enter(); + char buffer[ERROR_BUF_SIZE]; + int size = vsnprintf(buffer, ERROR_BUF_SIZE, format, arg); + if (size > 0) { + if (!stdio_uart_inited) { + serial_init(&stdio_uart, STDIO_UART_TX, STDIO_UART_RX); + } +#if MBED_CONF_PLATFORM_STDIO_CONVERT_NEWLINES + char stdio_out_prev = '\0'; + for (int i = 0; i < size; i++) { + if (buffer[i] == '\n' && stdio_out_prev != '\r') { + serial_putc(&stdio_uart, '\r'); + } + serial_putc(&stdio_uart, buffer[i]); + stdio_out_prev = buffer[i]; + } +#else + for (int i = 0; i < size; i++) { + serial_putc(&stdio_uart, buffer[i]); + } +#endif + } + core_util_critical_section_exit(); +#endif +} +