add rotary
Dependencies: X_NUCLEO_IKS01A1 LoRaWAN-lib SX1272Lib mbed
Fork of Canada-SX1272-LoRaWAN-Bootcamp by
LoRaWAN-SX1272-Mbed-Shield
Overview
LoRaWAN-SX1272-Mbed-Shield application demo is a LoRaWAN Class-A device example project using LoRaWAN-lib and SX1272Lib libraries that send out sensors data.
Prerequisites
1. NUCLEO_L152RE board.
2. SX1272-mbed-shield board.
3. X-NUCLEO-IKS01A1.
4. Grove Red LED.
5. Grove Button.
6. Grove Rotary Angle Sensor.
7. mbed online compiler.
8. Tera Term.
Hardware Configuration
Application 8, 9, 11
1. Connect NUCLEO_L152RE with X-NUCLEO-IKS01A1.
2. On top of X-NUCLEO-IKS01A1, connect SX1272-mbed-shield.
Application 13
1. Connect NUCLEO_L152RE with SX1272-mbed-shield.
2. Connect Grove Red LED with DIO_D6 port on SX1272-mbed-shield.
3. Connect Grove Button with DIO_D8 port on SX1272-mbed-shield.
4. Connect Grove Rotary Angle Sensor with ANA_A1 port SX1272-mbed-shield.
Software Configuration
The end-device must be configured with the following parameters:
- Commissioning.h
- Activation Type: OTA or ABP
- OTA: #define OVER_THE_AIR_ACTIVATION 1
- Network Type: Public or Private
- Public: #define LORAWAN_PUBLIC_NETWORK true
- LORAWAN_DEVICE_EUI (8 Bytes) : Fist 3 Bytes is the Organizationally Unique Identifier (OUI) followed by 5 bytes of unique ID. If not defined by user, then the firmware automatically assigns one to the end-device. (For OTA)
- #define IEEE_OUI 0x00, 0x00, 0x00
- #define LORAWAN_DEVICE_EUI { IEEE_OUI, 0x00, 0x00, 0x00, 0x00, 0x00 }
- #define IEEE_OUI 0x00, 0x00, 0x00
- LORAWAN_APPLICATION_EUI (8 Bytes) (For OTA)
- #define LORAWAN_APPLICATION_EUI { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
- LORAWAN_APPLICATION_KEY (16 Bytes) (For OTA)
- #define LORAWAN_APPLICATION_KEY { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff }
- #define LORAWAN_APPLICATION_KEY { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff }
- LORAWAN_DEVICE_ADDRESS (For ABP)
- #define LORAWAN_DEVICE_ADDRESS ( uint32_t )0x0
- LORAWAN_NWKSKEY (For ABP)
- #define LORAWAN_NWKSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
- LORAWAN_APPSKEY (For ABP)
- #define LORAWAN_APPSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
- Activation Type: OTA or ABP
- Configure.h
- Communication Type: Hybrid or FHSS
- Hybrid: #define USE_BAND_915_HYBRID
- Join request Period:
- 5 sec: #define OVER_THE_AIR_ACTIVATION_DUTYCYCLE 5000000 value in us
- TX Period:
- 5 sec: #define APP_TX_DUTYCYCLE 5000000 value in us
- Uplink message: Confirmed or Unconfirmed
- Confirmed: #define LORAWAN_CONFIRMED_MSG_ON 1
- ADR(Adaptive Data Rate): ON or OFF
- OFF: #define LORAWAN_ADR_ON 0
- Default data rate: DR_0 or DR_1 or DR_2 or DR_3 or DR_4
- DR_0: #define LORAWAN_DEFAULT_DATARATE DR_0
- Application Type: 8 (IKS01A1) or 9 (IKS01A1+Cayenne) or 11 (Push Button) or 13 (rotary+Cayenne)
- 9: #define LORAWAN_APP_PORT 9
- Tx Power: 10 to 30
- 20 dBm: #define LORAWAN_TX_POWER TX_POWER_20_DBM
- Communication Type: Hybrid or FHSS
Serial Terminal Display
- Use Tera Term to see the sending message (baud rate: 115200):
- button = 0 (if not press) button = 1 (if pressed)
- rotary = 0 ~ 300
- button = 0 (if not press) button = 1 (if pressed)
Diff: app/Config.h
- Revision:
- 0:6cc76d70e2a1
- Child:
- 2:5859f5872d6c
diff -r 000000000000 -r 6cc76d70e2a1 app/Config.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/app/Config.h Thu Apr 06 21:59:50 2017 +0000 @@ -0,0 +1,129 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2015 Semtech + +Description: End device communication parameters + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Uttam Bhat +*/ + +#ifndef __LORA_CONFIG_H__ +#define __LORA_CONFIG_H__ + +/*! + * Configure End-Device to use 8-channels corresponding to Block A + * Comment/Uncomment to disable/enable Hybrid mode + */ +#define USE_BAND_915_HYBRID + +#ifndef USE_BAND_915_HYBRID +/*! + * Configure End-Device to use 64-channels across to Block A thru Block H + */ +#define USE_BAND_915 + +#endif + +/*! + * Join requests trials periodicity. It is the time between RX1/RX2 and next TX + */ +#define OVER_THE_AIR_ACTIVATION_DUTYCYCLE 5000000 // value in us + +/*! + * Defines the application data transmission periodicity. It is the time between RX1/RX2 and next TX + */ +#define APP_TX_DUTYCYCLE 5000000 // value in us + +/*! + * LoRaWAN confirmed messages + * \remark 1 : Confirmed messages enabled. Must receive ACK from network server + 0 : Confirmed messages disabled. + */ +#define LORAWAN_CONFIRMED_MSG_ON 1 + +/*! + * LoRaWAN Adaptive Data Rate + * + * \remark Please note that when ADR is enabled the end-device uses default datarate of DR_0 + */ +#define LORAWAN_ADR_ON 0 + +/*! + * Default mote datarate + * \remark DR_0 : 980 bps; DR_1 : 1760 bps; DR_2 : 3125 bps; DR_3 : 5470 bps; DR_4 : 12500 bps + */ +#define LORAWAN_DEFAULT_DATARATE DR_0 + +/*! + * LoRaWAN application port + */ +#define LORAWAN_APP_PORT 9 + +/*! + * LoRaWAN User defined Tx Power + * + * \remark The Tx power level is set as TX_POWER_P_DBM, where 10 <= P <= 30 and P is even value { i.e. P = 10, 12, 14 ... 28 or 30 } + */ +#define LORAWAN_TX_POWER TX_POWER_20_DBM + +#if ( LORAWAN_APP_PORT == 5 ) +/*==================================================== + US01 GPS APPLICATION DEMO (PORT 5) +====================================================*/ + +/*! + * User application data buffer size + */ +#define LORAWAN_APP_DATA_SIZE 11 + +/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/ + +#elif ( LORAWAN_APP_PORT == 8 ) +/*==================================================== + IKS01A1 SENSOR DATA (PORT 8) +====================================================*/ + +#define USE_IKS01A1_SENSOR +/*! + * User application data buffer size + */ +#define LORAWAN_APP_DATA_SIZE 11 + +/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/ + +#elif ( LORAWAN_APP_PORT == 9 ) +/*==================================================== + IKS01A1 SENSOR DATA (PORT 9) + CAYENNE LPP +====================================================*/ + +#define USE_IKS01A1_SENSOR + +#define USE_CAYENNE_LPP +/*! + * User application data buffer size + */ +#define LORAWAN_APP_DATA_SIZE 11 + +/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/ + +#elif ( LORAWAN_APP_PORT == 11 ) +/*==================================================== + PUSH BUTTON DEMO (PORT 11) +====================================================*/ + +/*! + * User application data buffer size + */ +#define LORAWAN_APP_DATA_SIZE 2 + +/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/ + +#endif + +#endif // __LORA_CONFIG_H__