Terence Huang / Canada-SX1272-LoRaWAN-Bootcamp-rotary

add rotary

Dependencies:   X_NUCLEO_IKS01A1 LoRaWAN-lib SX1272Lib mbed

Fork of Canada-SX1272-LoRaWAN-Bootcamp by Uttam Bhat

LoRaWAN-SX1272-Mbed-Shield

Overview

LoRaWAN-SX1272-Mbed-Shield application demo is a LoRaWAN Class-A device example project using LoRaWAN-lib and SX1272Lib libraries that send out sensors data.

Prerequisites

1. NUCLEO_L152RE board.
2. SX1272-mbed-shield board.
3. X-NUCLEO-IKS01A1.
4. Grove Red LED.
5. Grove Button.
6. Grove Rotary Angle Sensor.
7. mbed online compiler.
8. Tera Term.

Hardware Configuration

Application 8, 9, 11
1. Connect NUCLEO_L152RE with X-NUCLEO-IKS01A1.
2. On top of X-NUCLEO-IKS01A1, connect SX1272-mbed-shield.
Application 13
1. Connect NUCLEO_L152RE with SX1272-mbed-shield.
2. Connect Grove Red LED with DIO_D6 port on SX1272-mbed-shield.
3. Connect Grove Button with DIO_D8 port on SX1272-mbed-shield.
4. Connect Grove Rotary Angle Sensor with ANA_A1 port SX1272-mbed-shield.

Software Configuration

The end-device must be configured with the following parameters:

  • Commissioning.h
    • Activation Type: OTA or ABP
      • OTA: #define OVER_THE_AIR_ACTIVATION 1
    • Network Type: Public or Private
      • Public: #define LORAWAN_PUBLIC_NETWORK true
    • LORAWAN_DEVICE_EUI (8 Bytes) : Fist 3 Bytes is the Organizationally Unique Identifier (OUI) followed by 5 bytes of unique ID. If not defined by user, then the firmware automatically assigns one to the end-device. (For OTA)
      • #define IEEE_OUI 0x00, 0x00, 0x00
      • #define LORAWAN_DEVICE_EUI { IEEE_OUI, 0x00, 0x00, 0x00, 0x00, 0x00 }
    • LORAWAN_APPLICATION_EUI (8 Bytes) (For OTA)
      • #define LORAWAN_APPLICATION_EUI { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
    • LORAWAN_APPLICATION_KEY (16 Bytes) (For OTA)
      • #define LORAWAN_APPLICATION_KEY { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff }
    • LORAWAN_DEVICE_ADDRESS (For ABP)
      • #define LORAWAN_DEVICE_ADDRESS ( uint32_t )0x0
    • LORAWAN_NWKSKEY (For ABP)
      • #define LORAWAN_NWKSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
    • LORAWAN_APPSKEY (For ABP)
      • #define LORAWAN_APPSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
  • Configure.h
    • Communication Type: Hybrid or FHSS
      • Hybrid: #define USE_BAND_915_HYBRID
    • Join request Period:
      • 5 sec: #define OVER_THE_AIR_ACTIVATION_DUTYCYCLE 5000000 value in us
    • TX Period:
      • 5 sec: #define APP_TX_DUTYCYCLE 5000000 value in us
    • Uplink message: Confirmed or Unconfirmed
      • Confirmed: #define LORAWAN_CONFIRMED_MSG_ON 1
    • ADR(Adaptive Data Rate): ON or OFF
      • OFF: #define LORAWAN_ADR_ON 0
    • Default data rate: DR_0 or DR_1 or DR_2 or DR_3 or DR_4
      • DR_0: #define LORAWAN_DEFAULT_DATARATE DR_0
    • Application Type: 8 (IKS01A1) or 9 (IKS01A1+Cayenne) or 11 (Push Button) or 13 (rotary+Cayenne)
      • 9: #define LORAWAN_APP_PORT 9
    • Tx Power: 10 to 30
      • 20 dBm: #define LORAWAN_TX_POWER TX_POWER_20_DBM

Serial Terminal Display

  • Use Tera Term to see the sending message (baud rate: 115200):
    • button = 0 (if not press) button = 1 (if pressed)
    • rotary = 0 ~ 300

1800

Diff: app/Config.h

Revision:
0:6cc76d70e2a1
Child:
2:5859f5872d6c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/app/Config.h	Thu Apr 06 21:59:50 2017 +0000
@@ -0,0 +1,129 @@
+/*
+ / _____)             _              | |
+( (____  _____ ____ _| |_ _____  ____| |__
+ \____ \| ___ |    (_   _) ___ |/ ___)  _ \
+ _____) ) ____| | | || |_| ____( (___| | | |
+(______/|_____)_|_|_| \__)_____)\____)_| |_|
+    (C)2015 Semtech
+
+Description: End device communication parameters
+
+License: Revised BSD License, see LICENSE.TXT file include in the project
+
+Maintainer: Uttam Bhat
+*/
+
+#ifndef __LORA_CONFIG_H__
+#define __LORA_CONFIG_H__
+
+/*!
+ * Configure End-Device to use 8-channels corresponding to Block A
+ * Comment/Uncomment to disable/enable Hybrid mode
+ */
+#define USE_BAND_915_HYBRID
+
+#ifndef USE_BAND_915_HYBRID
+/*!
+ * Configure End-Device to use 64-channels across to Block A thru Block H
+ */
+#define USE_BAND_915
+
+#endif
+
+/*!
+ * Join requests trials periodicity. It is the time between RX1/RX2 and next TX
+ */
+#define OVER_THE_AIR_ACTIVATION_DUTYCYCLE           5000000  // value in us
+
+/*!
+ * Defines the application data transmission periodicity. It is the time between RX1/RX2 and next TX
+ */
+#define APP_TX_DUTYCYCLE                            5000000  // value in us
+
+/*!
+ * LoRaWAN confirmed messages
+ * \remark 1 : Confirmed messages enabled. Must receive ACK from network server
+           0 : Confirmed messages disabled. 
+ */
+#define LORAWAN_CONFIRMED_MSG_ON                    1
+
+/*!
+ * LoRaWAN Adaptive Data Rate
+ *
+ * \remark Please note that when ADR is enabled the end-device uses default datarate of DR_0
+ */
+#define LORAWAN_ADR_ON                              0
+
+/*!
+ * Default mote datarate
+ * \remark DR_0 : 980 bps; DR_1 : 1760 bps; DR_2 : 3125 bps; DR_3 : 5470 bps; DR_4 : 12500 bps
+ */
+#define LORAWAN_DEFAULT_DATARATE                    DR_0
+
+/*!
+ * LoRaWAN application port
+ */
+#define LORAWAN_APP_PORT                            9
+
+/*!
+ * LoRaWAN User defined Tx Power
+ *
+ * \remark The Tx power level is set as TX_POWER_P_DBM, where 10 <= P <= 30 and P is even value { i.e. P = 10, 12, 14 ... 28 or 30 }
+ */
+#define LORAWAN_TX_POWER                            TX_POWER_20_DBM
+
+#if ( LORAWAN_APP_PORT == 5 )
+/*====================================================
+            US01 GPS APPLICATION DEMO (PORT 5)
+====================================================*/
+
+/*!
+ * User application data buffer size
+ */
+#define LORAWAN_APP_DATA_SIZE                       11
+
+/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
+
+#elif ( LORAWAN_APP_PORT == 8 )
+/*====================================================
+                IKS01A1 SENSOR DATA (PORT 8)
+====================================================*/
+
+#define USE_IKS01A1_SENSOR
+/*!
+ * User application data buffer size
+ */
+#define LORAWAN_APP_DATA_SIZE                       11
+
+/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
+
+#elif ( LORAWAN_APP_PORT == 9 )
+/*====================================================
+    IKS01A1 SENSOR DATA (PORT 9) + CAYENNE LPP
+====================================================*/
+
+#define USE_IKS01A1_SENSOR
+
+#define USE_CAYENNE_LPP
+/*!
+ * User application data buffer size
+ */
+#define LORAWAN_APP_DATA_SIZE                       11
+
+/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
+
+#elif ( LORAWAN_APP_PORT == 11 )
+/*====================================================
+                PUSH BUTTON DEMO (PORT 11)
+====================================================*/
+
+/*!
+ * User application data buffer size
+ */
+#define LORAWAN_APP_DATA_SIZE                       2
+
+/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
+
+#endif
+
+#endif //  __LORA_CONFIG_H__