add rotary

Dependencies:   X_NUCLEO_IKS01A1 LoRaWAN-lib SX1272Lib mbed

Fork of Canada-SX1272-LoRaWAN-Bootcamp by Uttam Bhat

LoRaWAN-SX1272-Mbed-Shield


Overview

LoRaWAN-SX1272-Mbed-Shield application demo is a LoRaWAN Class-A device example project using LoRaWAN-lib and SX1272Lib libraries that send out sensors data.

Prerequisites

1. NUCLEO_L152RE board.
2. SX1272-mbed-shield board.
3. X-NUCLEO-IKS01A1.
4. Grove Red LED.
5. Grove Button.
6. Grove Rotary Angle Sensor.
7. mbed online compiler.
8. Tera Term.

Hardware Configuration

Application 8, 9, 11
1. Connect NUCLEO_L152RE with X-NUCLEO-IKS01A1.
2. On top of X-NUCLEO-IKS01A1, connect SX1272-mbed-shield.
Application 13
1. Connect NUCLEO_L152RE with SX1272-mbed-shield.
2. Connect Grove Red LED with DIO_D6 port on SX1272-mbed-shield.
3. Connect Grove Button with DIO_D8 port on SX1272-mbed-shield.
4. Connect Grove Rotary Angle Sensor with ANA_A1 port SX1272-mbed-shield.

Software Configuration

The end-device must be configured with the following parameters:

  • Commissioning.h
    • Activation Type: OTA or ABP
      • OTA: #define OVER_THE_AIR_ACTIVATION 1
    • Network Type: Public or Private
      • Public: #define LORAWAN_PUBLIC_NETWORK true
    • LORAWAN_DEVICE_EUI (8 Bytes) : Fist 3 Bytes is the Organizationally Unique Identifier (OUI) followed by 5 bytes of unique ID. If not defined by user, then the firmware automatically assigns one to the end-device. (For OTA)
      • #define IEEE_OUI 0x00, 0x00, 0x00
      • #define LORAWAN_DEVICE_EUI { IEEE_OUI, 0x00, 0x00, 0x00, 0x00, 0x00 }
    • LORAWAN_APPLICATION_EUI (8 Bytes) (For OTA)
      • #define LORAWAN_APPLICATION_EUI { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
    • LORAWAN_APPLICATION_KEY (16 Bytes) (For OTA)
      • #define LORAWAN_APPLICATION_KEY { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff }
    • LORAWAN_DEVICE_ADDRESS (For ABP)
      • #define LORAWAN_DEVICE_ADDRESS ( uint32_t )0x0
    • LORAWAN_NWKSKEY (For ABP)
      • #define LORAWAN_NWKSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
    • LORAWAN_APPSKEY (For ABP)
      • #define LORAWAN_APPSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
  • Configure.h
    • Communication Type: Hybrid or FHSS
      • Hybrid: #define USE_BAND_915_HYBRID
    • Join request Period:
      • 5 sec: #define OVER_THE_AIR_ACTIVATION_DUTYCYCLE 5000000 value in us
    • TX Period:
      • 5 sec: #define APP_TX_DUTYCYCLE 5000000 value in us
    • Uplink message: Confirmed or Unconfirmed
      • Confirmed: #define LORAWAN_CONFIRMED_MSG_ON 1
    • ADR(Adaptive Data Rate): ON or OFF
      • OFF: #define LORAWAN_ADR_ON 0
    • Default data rate: DR_0 or DR_1 or DR_2 or DR_3 or DR_4
      • DR_0: #define LORAWAN_DEFAULT_DATARATE DR_0
    • Application Type: 8 (IKS01A1) or 9 (IKS01A1+Cayenne) or 11 (Push Button) or 13 (rotary+Cayenne)
      • 9: #define LORAWAN_APP_PORT 9
    • Tx Power: 10 to 30
      • 20 dBm: #define LORAWAN_TX_POWER TX_POWER_20_DBM

Serial Terminal Display

  • Use Tera Term to see the sending message (baud rate: 115200):
    • button = 0 (if not press) button = 1 (if pressed)
    • rotary = 0 ~ 300

1800

Committer:
terence304
Date:
Tue Jul 18 01:18:28 2017 +0000
Revision:
2:5859f5872d6c
Parent:
0:6cc76d70e2a1
Child:
6:ab743407f248
Add external button and rotary sensor

Who changed what in which revision?

UserRevisionLine numberNew contents of line
ubhat 0:6cc76d70e2a1 1 /*
ubhat 0:6cc76d70e2a1 2 / _____) _ | |
ubhat 0:6cc76d70e2a1 3 ( (____ _____ ____ _| |_ _____ ____| |__
ubhat 0:6cc76d70e2a1 4 \____ \| ___ | (_ _) ___ |/ ___) _ \
ubhat 0:6cc76d70e2a1 5 _____) ) ____| | | || |_| ____( (___| | | |
ubhat 0:6cc76d70e2a1 6 (______/|_____)_|_|_| \__)_____)\____)_| |_|
ubhat 0:6cc76d70e2a1 7 (C)2015 Semtech
ubhat 0:6cc76d70e2a1 8
ubhat 0:6cc76d70e2a1 9 Description: End device communication parameters
ubhat 0:6cc76d70e2a1 10
ubhat 0:6cc76d70e2a1 11 License: Revised BSD License, see LICENSE.TXT file include in the project
ubhat 0:6cc76d70e2a1 12
ubhat 0:6cc76d70e2a1 13 Maintainer: Uttam Bhat
ubhat 0:6cc76d70e2a1 14 */
ubhat 0:6cc76d70e2a1 15
ubhat 0:6cc76d70e2a1 16 #ifndef __LORA_CONFIG_H__
ubhat 0:6cc76d70e2a1 17 #define __LORA_CONFIG_H__
ubhat 0:6cc76d70e2a1 18
ubhat 0:6cc76d70e2a1 19 /*!
ubhat 0:6cc76d70e2a1 20 * Configure End-Device to use 8-channels corresponding to Block A
ubhat 0:6cc76d70e2a1 21 * Comment/Uncomment to disable/enable Hybrid mode
ubhat 0:6cc76d70e2a1 22 */
ubhat 0:6cc76d70e2a1 23 #define USE_BAND_915_HYBRID
ubhat 0:6cc76d70e2a1 24
ubhat 0:6cc76d70e2a1 25 #ifndef USE_BAND_915_HYBRID
ubhat 0:6cc76d70e2a1 26 /*!
ubhat 0:6cc76d70e2a1 27 * Configure End-Device to use 64-channels across to Block A thru Block H
ubhat 0:6cc76d70e2a1 28 */
ubhat 0:6cc76d70e2a1 29 #define USE_BAND_915
ubhat 0:6cc76d70e2a1 30
ubhat 0:6cc76d70e2a1 31 #endif
ubhat 0:6cc76d70e2a1 32
ubhat 0:6cc76d70e2a1 33 /*!
ubhat 0:6cc76d70e2a1 34 * Join requests trials periodicity. It is the time between RX1/RX2 and next TX
ubhat 0:6cc76d70e2a1 35 */
ubhat 0:6cc76d70e2a1 36 #define OVER_THE_AIR_ACTIVATION_DUTYCYCLE 5000000 // value in us
ubhat 0:6cc76d70e2a1 37
ubhat 0:6cc76d70e2a1 38 /*!
ubhat 0:6cc76d70e2a1 39 * Defines the application data transmission periodicity. It is the time between RX1/RX2 and next TX
ubhat 0:6cc76d70e2a1 40 */
ubhat 0:6cc76d70e2a1 41 #define APP_TX_DUTYCYCLE 5000000 // value in us
ubhat 0:6cc76d70e2a1 42
ubhat 0:6cc76d70e2a1 43 /*!
ubhat 0:6cc76d70e2a1 44 * LoRaWAN confirmed messages
ubhat 0:6cc76d70e2a1 45 * \remark 1 : Confirmed messages enabled. Must receive ACK from network server
ubhat 0:6cc76d70e2a1 46 0 : Confirmed messages disabled.
ubhat 0:6cc76d70e2a1 47 */
ubhat 0:6cc76d70e2a1 48 #define LORAWAN_CONFIRMED_MSG_ON 1
ubhat 0:6cc76d70e2a1 49
ubhat 0:6cc76d70e2a1 50 /*!
ubhat 0:6cc76d70e2a1 51 * LoRaWAN Adaptive Data Rate
ubhat 0:6cc76d70e2a1 52 *
ubhat 0:6cc76d70e2a1 53 * \remark Please note that when ADR is enabled the end-device uses default datarate of DR_0
ubhat 0:6cc76d70e2a1 54 */
ubhat 0:6cc76d70e2a1 55 #define LORAWAN_ADR_ON 0
ubhat 0:6cc76d70e2a1 56
ubhat 0:6cc76d70e2a1 57 /*!
ubhat 0:6cc76d70e2a1 58 * Default mote datarate
ubhat 0:6cc76d70e2a1 59 * \remark DR_0 : 980 bps; DR_1 : 1760 bps; DR_2 : 3125 bps; DR_3 : 5470 bps; DR_4 : 12500 bps
ubhat 0:6cc76d70e2a1 60 */
ubhat 0:6cc76d70e2a1 61 #define LORAWAN_DEFAULT_DATARATE DR_0
ubhat 0:6cc76d70e2a1 62
ubhat 0:6cc76d70e2a1 63 /*!
ubhat 0:6cc76d70e2a1 64 * LoRaWAN application port
ubhat 0:6cc76d70e2a1 65 */
terence304 2:5859f5872d6c 66 #define LORAWAN_APP_PORT 13
ubhat 0:6cc76d70e2a1 67
ubhat 0:6cc76d70e2a1 68 /*!
ubhat 0:6cc76d70e2a1 69 * LoRaWAN User defined Tx Power
ubhat 0:6cc76d70e2a1 70 *
ubhat 0:6cc76d70e2a1 71 * \remark The Tx power level is set as TX_POWER_P_DBM, where 10 <= P <= 30 and P is even value { i.e. P = 10, 12, 14 ... 28 or 30 }
ubhat 0:6cc76d70e2a1 72 */
ubhat 0:6cc76d70e2a1 73 #define LORAWAN_TX_POWER TX_POWER_20_DBM
ubhat 0:6cc76d70e2a1 74
ubhat 0:6cc76d70e2a1 75 #if ( LORAWAN_APP_PORT == 5 )
ubhat 0:6cc76d70e2a1 76 /*====================================================
ubhat 0:6cc76d70e2a1 77 US01 GPS APPLICATION DEMO (PORT 5)
ubhat 0:6cc76d70e2a1 78 ====================================================*/
ubhat 0:6cc76d70e2a1 79
ubhat 0:6cc76d70e2a1 80 /*!
ubhat 0:6cc76d70e2a1 81 * User application data buffer size
ubhat 0:6cc76d70e2a1 82 */
ubhat 0:6cc76d70e2a1 83 #define LORAWAN_APP_DATA_SIZE 11
ubhat 0:6cc76d70e2a1 84
ubhat 0:6cc76d70e2a1 85 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
ubhat 0:6cc76d70e2a1 86
ubhat 0:6cc76d70e2a1 87 #elif ( LORAWAN_APP_PORT == 8 )
ubhat 0:6cc76d70e2a1 88 /*====================================================
ubhat 0:6cc76d70e2a1 89 IKS01A1 SENSOR DATA (PORT 8)
ubhat 0:6cc76d70e2a1 90 ====================================================*/
ubhat 0:6cc76d70e2a1 91
ubhat 0:6cc76d70e2a1 92 #define USE_IKS01A1_SENSOR
ubhat 0:6cc76d70e2a1 93 /*!
ubhat 0:6cc76d70e2a1 94 * User application data buffer size
ubhat 0:6cc76d70e2a1 95 */
ubhat 0:6cc76d70e2a1 96 #define LORAWAN_APP_DATA_SIZE 11
ubhat 0:6cc76d70e2a1 97
ubhat 0:6cc76d70e2a1 98 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
ubhat 0:6cc76d70e2a1 99
ubhat 0:6cc76d70e2a1 100 #elif ( LORAWAN_APP_PORT == 9 )
ubhat 0:6cc76d70e2a1 101 /*====================================================
ubhat 0:6cc76d70e2a1 102 IKS01A1 SENSOR DATA (PORT 9) + CAYENNE LPP
ubhat 0:6cc76d70e2a1 103 ====================================================*/
ubhat 0:6cc76d70e2a1 104
ubhat 0:6cc76d70e2a1 105 #define USE_IKS01A1_SENSOR
ubhat 0:6cc76d70e2a1 106
ubhat 0:6cc76d70e2a1 107 #define USE_CAYENNE_LPP
ubhat 0:6cc76d70e2a1 108 /*!
ubhat 0:6cc76d70e2a1 109 * User application data buffer size
ubhat 0:6cc76d70e2a1 110 */
ubhat 0:6cc76d70e2a1 111 #define LORAWAN_APP_DATA_SIZE 11
ubhat 0:6cc76d70e2a1 112
ubhat 0:6cc76d70e2a1 113 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
ubhat 0:6cc76d70e2a1 114
ubhat 0:6cc76d70e2a1 115 #elif ( LORAWAN_APP_PORT == 11 )
ubhat 0:6cc76d70e2a1 116 /*====================================================
ubhat 0:6cc76d70e2a1 117 PUSH BUTTON DEMO (PORT 11)
ubhat 0:6cc76d70e2a1 118 ====================================================*/
ubhat 0:6cc76d70e2a1 119
ubhat 0:6cc76d70e2a1 120 /*!
ubhat 0:6cc76d70e2a1 121 * User application data buffer size
ubhat 0:6cc76d70e2a1 122 */
ubhat 0:6cc76d70e2a1 123 #define LORAWAN_APP_DATA_SIZE 2
ubhat 0:6cc76d70e2a1 124
ubhat 0:6cc76d70e2a1 125 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
ubhat 0:6cc76d70e2a1 126
terence304 2:5859f5872d6c 127 #elif ( LORAWAN_APP_PORT == 13 )
terence304 2:5859f5872d6c 128 /*====================================================
terence304 2:5859f5872d6c 129 Rotary AND BUTTON DEMO + CAYENNE LPP (PORT 13)
terence304 2:5859f5872d6c 130 ====================================================*/
terence304 2:5859f5872d6c 131
terence304 2:5859f5872d6c 132 /*!
terence304 2:5859f5872d6c 133 * User application data buffer size
terence304 2:5859f5872d6c 134 */
terence304 2:5859f5872d6c 135 #define LORAWAN_APP_DATA_SIZE 7
terence304 2:5859f5872d6c 136
terence304 2:5859f5872d6c 137 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
terence304 2:5859f5872d6c 138
ubhat 0:6cc76d70e2a1 139 #endif
ubhat 0:6cc76d70e2a1 140
ubhat 0:6cc76d70e2a1 141 #endif // __LORA_CONFIG_H__