add rotary
Dependencies: X_NUCLEO_IKS01A1 LoRaWAN-lib SX1272Lib mbed
Fork of Canada-SX1272-LoRaWAN-Bootcamp by
LoRaWAN-SX1272-Mbed-Shield
Overview
LoRaWAN-SX1272-Mbed-Shield application demo is a LoRaWAN Class-A device example project using LoRaWAN-lib and SX1272Lib libraries that send out sensors data.
Prerequisites
1. NUCLEO_L152RE board.
2. SX1272-mbed-shield board.
3. X-NUCLEO-IKS01A1.
4. Grove Red LED.
5. Grove Button.
6. Grove Rotary Angle Sensor.
7. mbed online compiler.
8. Tera Term.
Hardware Configuration
Application 8, 9, 11
1. Connect NUCLEO_L152RE with X-NUCLEO-IKS01A1.
2. On top of X-NUCLEO-IKS01A1, connect SX1272-mbed-shield.
Application 13
1. Connect NUCLEO_L152RE with SX1272-mbed-shield.
2. Connect Grove Red LED with DIO_D6 port on SX1272-mbed-shield.
3. Connect Grove Button with DIO_D8 port on SX1272-mbed-shield.
4. Connect Grove Rotary Angle Sensor with ANA_A1 port SX1272-mbed-shield.
Software Configuration
The end-device must be configured with the following parameters:
- Commissioning.h
- Activation Type: OTA or ABP
- OTA: #define OVER_THE_AIR_ACTIVATION 1
- Network Type: Public or Private
- Public: #define LORAWAN_PUBLIC_NETWORK true
- LORAWAN_DEVICE_EUI (8 Bytes) : Fist 3 Bytes is the Organizationally Unique Identifier (OUI) followed by 5 bytes of unique ID. If not defined by user, then the firmware automatically assigns one to the end-device. (For OTA)
- #define IEEE_OUI 0x00, 0x00, 0x00
- #define LORAWAN_DEVICE_EUI { IEEE_OUI, 0x00, 0x00, 0x00, 0x00, 0x00 }
- #define IEEE_OUI 0x00, 0x00, 0x00
- LORAWAN_APPLICATION_EUI (8 Bytes) (For OTA)
- #define LORAWAN_APPLICATION_EUI { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
- LORAWAN_APPLICATION_KEY (16 Bytes) (For OTA)
- #define LORAWAN_APPLICATION_KEY { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff }
- #define LORAWAN_APPLICATION_KEY { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff }
- LORAWAN_DEVICE_ADDRESS (For ABP)
- #define LORAWAN_DEVICE_ADDRESS ( uint32_t )0x0
- LORAWAN_NWKSKEY (For ABP)
- #define LORAWAN_NWKSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
- LORAWAN_APPSKEY (For ABP)
- #define LORAWAN_APPSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
- Activation Type: OTA or ABP
- Configure.h
- Communication Type: Hybrid or FHSS
- Hybrid: #define USE_BAND_915_HYBRID
- Join request Period:
- 5 sec: #define OVER_THE_AIR_ACTIVATION_DUTYCYCLE 5000000 value in us
- TX Period:
- 5 sec: #define APP_TX_DUTYCYCLE 5000000 value in us
- Uplink message: Confirmed or Unconfirmed
- Confirmed: #define LORAWAN_CONFIRMED_MSG_ON 1
- ADR(Adaptive Data Rate): ON or OFF
- OFF: #define LORAWAN_ADR_ON 0
- Default data rate: DR_0 or DR_1 or DR_2 or DR_3 or DR_4
- DR_0: #define LORAWAN_DEFAULT_DATARATE DR_0
- Application Type: 8 (IKS01A1) or 9 (IKS01A1+Cayenne) or 11 (Push Button) or 13 (rotary+Cayenne)
- 9: #define LORAWAN_APP_PORT 9
- Tx Power: 10 to 30
- 20 dBm: #define LORAWAN_TX_POWER TX_POWER_20_DBM
- Communication Type: Hybrid or FHSS
Serial Terminal Display
- Use Tera Term to see the sending message (baud rate: 115200):
- button = 0 (if not press) button = 1 (if pressed)
- rotary = 0 ~ 300
- button = 0 (if not press) button = 1 (if pressed)
app/Config.h@2:5859f5872d6c, 2017-07-18 (annotated)
- Committer:
- terence304
- Date:
- Tue Jul 18 01:18:28 2017 +0000
- Revision:
- 2:5859f5872d6c
- Parent:
- 0:6cc76d70e2a1
- Child:
- 6:ab743407f248
Add external button and rotary sensor
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
ubhat | 0:6cc76d70e2a1 | 1 | /* |
ubhat | 0:6cc76d70e2a1 | 2 | / _____) _ | | |
ubhat | 0:6cc76d70e2a1 | 3 | ( (____ _____ ____ _| |_ _____ ____| |__ |
ubhat | 0:6cc76d70e2a1 | 4 | \____ \| ___ | (_ _) ___ |/ ___) _ \ |
ubhat | 0:6cc76d70e2a1 | 5 | _____) ) ____| | | || |_| ____( (___| | | | |
ubhat | 0:6cc76d70e2a1 | 6 | (______/|_____)_|_|_| \__)_____)\____)_| |_| |
ubhat | 0:6cc76d70e2a1 | 7 | (C)2015 Semtech |
ubhat | 0:6cc76d70e2a1 | 8 | |
ubhat | 0:6cc76d70e2a1 | 9 | Description: End device communication parameters |
ubhat | 0:6cc76d70e2a1 | 10 | |
ubhat | 0:6cc76d70e2a1 | 11 | License: Revised BSD License, see LICENSE.TXT file include in the project |
ubhat | 0:6cc76d70e2a1 | 12 | |
ubhat | 0:6cc76d70e2a1 | 13 | Maintainer: Uttam Bhat |
ubhat | 0:6cc76d70e2a1 | 14 | */ |
ubhat | 0:6cc76d70e2a1 | 15 | |
ubhat | 0:6cc76d70e2a1 | 16 | #ifndef __LORA_CONFIG_H__ |
ubhat | 0:6cc76d70e2a1 | 17 | #define __LORA_CONFIG_H__ |
ubhat | 0:6cc76d70e2a1 | 18 | |
ubhat | 0:6cc76d70e2a1 | 19 | /*! |
ubhat | 0:6cc76d70e2a1 | 20 | * Configure End-Device to use 8-channels corresponding to Block A |
ubhat | 0:6cc76d70e2a1 | 21 | * Comment/Uncomment to disable/enable Hybrid mode |
ubhat | 0:6cc76d70e2a1 | 22 | */ |
ubhat | 0:6cc76d70e2a1 | 23 | #define USE_BAND_915_HYBRID |
ubhat | 0:6cc76d70e2a1 | 24 | |
ubhat | 0:6cc76d70e2a1 | 25 | #ifndef USE_BAND_915_HYBRID |
ubhat | 0:6cc76d70e2a1 | 26 | /*! |
ubhat | 0:6cc76d70e2a1 | 27 | * Configure End-Device to use 64-channels across to Block A thru Block H |
ubhat | 0:6cc76d70e2a1 | 28 | */ |
ubhat | 0:6cc76d70e2a1 | 29 | #define USE_BAND_915 |
ubhat | 0:6cc76d70e2a1 | 30 | |
ubhat | 0:6cc76d70e2a1 | 31 | #endif |
ubhat | 0:6cc76d70e2a1 | 32 | |
ubhat | 0:6cc76d70e2a1 | 33 | /*! |
ubhat | 0:6cc76d70e2a1 | 34 | * Join requests trials periodicity. It is the time between RX1/RX2 and next TX |
ubhat | 0:6cc76d70e2a1 | 35 | */ |
ubhat | 0:6cc76d70e2a1 | 36 | #define OVER_THE_AIR_ACTIVATION_DUTYCYCLE 5000000 // value in us |
ubhat | 0:6cc76d70e2a1 | 37 | |
ubhat | 0:6cc76d70e2a1 | 38 | /*! |
ubhat | 0:6cc76d70e2a1 | 39 | * Defines the application data transmission periodicity. It is the time between RX1/RX2 and next TX |
ubhat | 0:6cc76d70e2a1 | 40 | */ |
ubhat | 0:6cc76d70e2a1 | 41 | #define APP_TX_DUTYCYCLE 5000000 // value in us |
ubhat | 0:6cc76d70e2a1 | 42 | |
ubhat | 0:6cc76d70e2a1 | 43 | /*! |
ubhat | 0:6cc76d70e2a1 | 44 | * LoRaWAN confirmed messages |
ubhat | 0:6cc76d70e2a1 | 45 | * \remark 1 : Confirmed messages enabled. Must receive ACK from network server |
ubhat | 0:6cc76d70e2a1 | 46 | 0 : Confirmed messages disabled. |
ubhat | 0:6cc76d70e2a1 | 47 | */ |
ubhat | 0:6cc76d70e2a1 | 48 | #define LORAWAN_CONFIRMED_MSG_ON 1 |
ubhat | 0:6cc76d70e2a1 | 49 | |
ubhat | 0:6cc76d70e2a1 | 50 | /*! |
ubhat | 0:6cc76d70e2a1 | 51 | * LoRaWAN Adaptive Data Rate |
ubhat | 0:6cc76d70e2a1 | 52 | * |
ubhat | 0:6cc76d70e2a1 | 53 | * \remark Please note that when ADR is enabled the end-device uses default datarate of DR_0 |
ubhat | 0:6cc76d70e2a1 | 54 | */ |
ubhat | 0:6cc76d70e2a1 | 55 | #define LORAWAN_ADR_ON 0 |
ubhat | 0:6cc76d70e2a1 | 56 | |
ubhat | 0:6cc76d70e2a1 | 57 | /*! |
ubhat | 0:6cc76d70e2a1 | 58 | * Default mote datarate |
ubhat | 0:6cc76d70e2a1 | 59 | * \remark DR_0 : 980 bps; DR_1 : 1760 bps; DR_2 : 3125 bps; DR_3 : 5470 bps; DR_4 : 12500 bps |
ubhat | 0:6cc76d70e2a1 | 60 | */ |
ubhat | 0:6cc76d70e2a1 | 61 | #define LORAWAN_DEFAULT_DATARATE DR_0 |
ubhat | 0:6cc76d70e2a1 | 62 | |
ubhat | 0:6cc76d70e2a1 | 63 | /*! |
ubhat | 0:6cc76d70e2a1 | 64 | * LoRaWAN application port |
ubhat | 0:6cc76d70e2a1 | 65 | */ |
terence304 | 2:5859f5872d6c | 66 | #define LORAWAN_APP_PORT 13 |
ubhat | 0:6cc76d70e2a1 | 67 | |
ubhat | 0:6cc76d70e2a1 | 68 | /*! |
ubhat | 0:6cc76d70e2a1 | 69 | * LoRaWAN User defined Tx Power |
ubhat | 0:6cc76d70e2a1 | 70 | * |
ubhat | 0:6cc76d70e2a1 | 71 | * \remark The Tx power level is set as TX_POWER_P_DBM, where 10 <= P <= 30 and P is even value { i.e. P = 10, 12, 14 ... 28 or 30 } |
ubhat | 0:6cc76d70e2a1 | 72 | */ |
ubhat | 0:6cc76d70e2a1 | 73 | #define LORAWAN_TX_POWER TX_POWER_20_DBM |
ubhat | 0:6cc76d70e2a1 | 74 | |
ubhat | 0:6cc76d70e2a1 | 75 | #if ( LORAWAN_APP_PORT == 5 ) |
ubhat | 0:6cc76d70e2a1 | 76 | /*==================================================== |
ubhat | 0:6cc76d70e2a1 | 77 | US01 GPS APPLICATION DEMO (PORT 5) |
ubhat | 0:6cc76d70e2a1 | 78 | ====================================================*/ |
ubhat | 0:6cc76d70e2a1 | 79 | |
ubhat | 0:6cc76d70e2a1 | 80 | /*! |
ubhat | 0:6cc76d70e2a1 | 81 | * User application data buffer size |
ubhat | 0:6cc76d70e2a1 | 82 | */ |
ubhat | 0:6cc76d70e2a1 | 83 | #define LORAWAN_APP_DATA_SIZE 11 |
ubhat | 0:6cc76d70e2a1 | 84 | |
ubhat | 0:6cc76d70e2a1 | 85 | /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/ |
ubhat | 0:6cc76d70e2a1 | 86 | |
ubhat | 0:6cc76d70e2a1 | 87 | #elif ( LORAWAN_APP_PORT == 8 ) |
ubhat | 0:6cc76d70e2a1 | 88 | /*==================================================== |
ubhat | 0:6cc76d70e2a1 | 89 | IKS01A1 SENSOR DATA (PORT 8) |
ubhat | 0:6cc76d70e2a1 | 90 | ====================================================*/ |
ubhat | 0:6cc76d70e2a1 | 91 | |
ubhat | 0:6cc76d70e2a1 | 92 | #define USE_IKS01A1_SENSOR |
ubhat | 0:6cc76d70e2a1 | 93 | /*! |
ubhat | 0:6cc76d70e2a1 | 94 | * User application data buffer size |
ubhat | 0:6cc76d70e2a1 | 95 | */ |
ubhat | 0:6cc76d70e2a1 | 96 | #define LORAWAN_APP_DATA_SIZE 11 |
ubhat | 0:6cc76d70e2a1 | 97 | |
ubhat | 0:6cc76d70e2a1 | 98 | /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/ |
ubhat | 0:6cc76d70e2a1 | 99 | |
ubhat | 0:6cc76d70e2a1 | 100 | #elif ( LORAWAN_APP_PORT == 9 ) |
ubhat | 0:6cc76d70e2a1 | 101 | /*==================================================== |
ubhat | 0:6cc76d70e2a1 | 102 | IKS01A1 SENSOR DATA (PORT 9) + CAYENNE LPP |
ubhat | 0:6cc76d70e2a1 | 103 | ====================================================*/ |
ubhat | 0:6cc76d70e2a1 | 104 | |
ubhat | 0:6cc76d70e2a1 | 105 | #define USE_IKS01A1_SENSOR |
ubhat | 0:6cc76d70e2a1 | 106 | |
ubhat | 0:6cc76d70e2a1 | 107 | #define USE_CAYENNE_LPP |
ubhat | 0:6cc76d70e2a1 | 108 | /*! |
ubhat | 0:6cc76d70e2a1 | 109 | * User application data buffer size |
ubhat | 0:6cc76d70e2a1 | 110 | */ |
ubhat | 0:6cc76d70e2a1 | 111 | #define LORAWAN_APP_DATA_SIZE 11 |
ubhat | 0:6cc76d70e2a1 | 112 | |
ubhat | 0:6cc76d70e2a1 | 113 | /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/ |
ubhat | 0:6cc76d70e2a1 | 114 | |
ubhat | 0:6cc76d70e2a1 | 115 | #elif ( LORAWAN_APP_PORT == 11 ) |
ubhat | 0:6cc76d70e2a1 | 116 | /*==================================================== |
ubhat | 0:6cc76d70e2a1 | 117 | PUSH BUTTON DEMO (PORT 11) |
ubhat | 0:6cc76d70e2a1 | 118 | ====================================================*/ |
ubhat | 0:6cc76d70e2a1 | 119 | |
ubhat | 0:6cc76d70e2a1 | 120 | /*! |
ubhat | 0:6cc76d70e2a1 | 121 | * User application data buffer size |
ubhat | 0:6cc76d70e2a1 | 122 | */ |
ubhat | 0:6cc76d70e2a1 | 123 | #define LORAWAN_APP_DATA_SIZE 2 |
ubhat | 0:6cc76d70e2a1 | 124 | |
ubhat | 0:6cc76d70e2a1 | 125 | /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/ |
ubhat | 0:6cc76d70e2a1 | 126 | |
terence304 | 2:5859f5872d6c | 127 | #elif ( LORAWAN_APP_PORT == 13 ) |
terence304 | 2:5859f5872d6c | 128 | /*==================================================== |
terence304 | 2:5859f5872d6c | 129 | Rotary AND BUTTON DEMO + CAYENNE LPP (PORT 13) |
terence304 | 2:5859f5872d6c | 130 | ====================================================*/ |
terence304 | 2:5859f5872d6c | 131 | |
terence304 | 2:5859f5872d6c | 132 | /*! |
terence304 | 2:5859f5872d6c | 133 | * User application data buffer size |
terence304 | 2:5859f5872d6c | 134 | */ |
terence304 | 2:5859f5872d6c | 135 | #define LORAWAN_APP_DATA_SIZE 7 |
terence304 | 2:5859f5872d6c | 136 | |
terence304 | 2:5859f5872d6c | 137 | /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/ |
terence304 | 2:5859f5872d6c | 138 | |
ubhat | 0:6cc76d70e2a1 | 139 | #endif |
ubhat | 0:6cc76d70e2a1 | 140 | |
ubhat | 0:6cc76d70e2a1 | 141 | #endif // __LORA_CONFIG_H__ |