![](/media/cache/profiles/aa7fd480bd75d86948e7f7aac11d2704.jpg.50x50_q85.jpg)
support library for C027 helper functions for Buffer Pipes, Buffered Serial Port (rtos capable) and GPS parsing. It includes modem APIs for USSD, SMS and Sockets.
Fork of C027_Support by
GPS.h
- Committer:
- mazgch
- Date:
- 2014-04-11
- Revision:
- 40:295099ff5338
- Parent:
- 39:9b4b9433e220
- Child:
- 51:e7b81c31baec
File content as of revision 40:295099ff5338:
#pragma once #include "mbed.h" #include "Pipe.h" #include "SerialPipe.h" #ifdef TARGET_UBLOX_C027 // if we detect the C027 platform we will assign the // default pinname and baudrate in the constructor // this helper macro will be used. #define _C027DEFAULT(name) = name #else #define _C027DEFAULT(name) #endif /** basic gps parser class */ class GPSParser { public: // #define WAIT -1 //!< wait for more incoming data (the start of a message was found, or no data available) #define NOT_FOUND 0 //!< a parser concluded the the current offset of the pipe doe not contain a valid message #define UNKNOWN 0x000000 //!< message type is unknown #define UBX 0x100000 //!< message if of protocol NMEA #define NMEA 0x200000 //!< message if of protocol UBX #define LENGTH(x) (x & 0x00FFFF) //!< extract/mask the length #define PROTOCOL(x) (x & 0xFF0000) //!< extract/mask the type /** Get a line from the physical interface. This fucntion needs to be implemented in the inherited class. \param buf the buffer to store it \param len size of the buffer \return type and length if something was found, WAIT if not enough data is available NOT_FOUND if nothing was found */ virtual int getMessage(char* buf, int len) = 0; /** send a buffer \param buf the buffer to write \param len size of the buffer to write \return bytes written */ virtual int send(const char* buf, int len); /** send a NMEA message, this function just takes the payload and calculates and adds checksum. ($ and *XX\r\n will be added) \param buf the message payload to write \param len size of the message payload to write \return total bytes written */ virtual int sendNmea(const char* buf, int len); /** send a UBX message, this function just takes the payload and calculates and adds checksum. \param cls the UBX class id \param id the UBX message id \param buf the message payload to write \param len size of the message payload to write \return total bytes written */ virtual int sendUbx(unsigned char cls, unsigned char id, const void* buf = NULL, int len = 0); /** Power off the gps, it can be again woken up by an edge on the serial port on the external interrupt pin. */ void powerOff(void); /** get the first character of a NMEA field \param ix the index of the field to find \param start the start of the buffer \param end the end of the buffer \return the pointer to the first character of the field. */ static const char* findNmeaItemPos(int ix, const char* start, const char* end); /** extract a double value from a buffer containing a NMEA message \param ix the index of the field to extract \param buf the NMEA message \param len the size of the NMEA message \param val the extracted value \return true if successful, false otherwise */ static bool getNmeaItem(int ix, char* buf, int len, double& val); /** extract a interger value from a buffer containing a NMEA message \param ix the index of the field to extract \param buf the NMEA message \param len the size of the NMEA message \param val the extracted value \param base the numeric base to be used (e.g. 8, 10 or 16) \return true if successful, false otherwise */ static bool getNmeaItem(int ix, char* buf, int len, int& val, int base/*=10*/); /** extract a char value from a buffer containing a NMEA message \param ix the index of the field to extract \param buf the NMEA message \param len the size of the NMEA message \param val the extracted value \return true if successful, false otherwise */ static bool getNmeaItem(int ix, char* buf, int len, char& val); /** extract a latitude/longitude value from a buffer containing a NMEA message \param ix the index of the field to extract (will extract ix and ix + 1) \param buf the NMEA message \param len the size of the NMEA message \param val the extracted latitude or longitude \return true if successful, false otherwise */ static bool getNmeaAngle(int ix, char* buf, int len, double& val); protected: /** Get a line from the physical interface. \param pipe the receiveing pipe to parse messages \param buf the buffer to store it \param len size of the buffer \return type and length if something was found, WAIT if not enough data is available NOT_FOUND if nothing was found */ static int _getMessage(Pipe<char>* pipe, char* buf, int len); /** Check if the current offset of the pipe contains a NMEA message. \param pipe the receiveing pipe to parse messages \param len numer of bytes to parse at maximum \return length if something was found (including the NMEA frame) WAIT if not enough data is available NOT_FOUND if nothing was found */ static int _parseNmea(Pipe<char>* pipe, int len); /** Check if the current offset of the pipe contains a UBX message. \param pipe the receiveing pipe to parse messages \param len numer of bytes to parse at maximum \return length if something was found (including the UBX frame) WAIT if not enough data is available NOT_FOUND if nothing was found */ static int _parseUbx(Pipe<char>* pipe, int len); /** Write bytes to the physical interface. This function needs to be implemented by the inherited class. \param buf the buffer to write \param len size of the buffer to write \return bytes written */ virtual int _send(const void* buf, int len) = 0; static const char toHex[16]; //!< num to hex conversion }; /** gps class which uses a serial port as physical interface. */ class GPSSerial : public SerialPipe, public GPSParser { public: /** Constructor \param tx is the serial ports transmit pin (gps to CPU) \param rx is the serial ports receive pin (CPU to gps) \param baudrate the baudrate of the gps use 9600 \param rxSize the size of the serial rx buffer \param txSize the size of the serial tx buffer */ GPSSerial(PinName tx _C027DEFAULT( GPSTXD ), PinName rx _C027DEFAULT( GPSRXD ), int baudrate _C027DEFAULT( GPSBAUD ), int rxSize = 256 , int txSize = 128 ); /** Get a line from the physical interface. \param buf the buffer to store it \param len size of the buffer \return type and length if something was found, WAIT if not enough data is available NOT_FOUND if nothing was found */ virtual int getMessage(char* buf, int len); protected: /** Write bytes to the physical interface. \param buf the buffer to write \param len size of the buffer to write \return bytes written */ virtual int _send(const void* buf, int len); }; /** gps class which uses a i2c as physical interface. */ class GPSI2C : public I2C, public GPSParser { public: /** Constructor \param sda is the I2C SDA pin (between CPU and GPS) \param scl is the I2C SCL pin (CPU to GPS) \param adr the I2C address of the GPS set to (66<<1) \param rxSize the size of the serial rx buffer */ GPSI2C(PinName sda _C027DEFAULT( GPSSDA ), PinName scl _C027DEFAULT( GPSSCL ), unsigned char i2cAdr _C027DEFAULT( GPSADR ), int rxSize = 256 ); /** helper function to probe the i2c device \return true if successfully detected the gps. */ bool detect(void); /** Get a line from the physical interface. \param buf the buffer to store it \param len size of the buffer \return type and length if something was found, WAIT if not enough data is available NOT_FOUND if nothing was found */ virtual int getMessage(char* buf, int len); /** send a buffer \param buf the buffer to write \param len size of the buffer to write \return bytes written */ virtual int send(const char* buf, int len); /** send a NMEA message, this function just takes the payload and calculates and adds checksum. ($ and *XX\r\n will be added) \param buf the message payload to write \param len size of the message payload to write \return total bytes written */ virtual int sendNmea(const char* buf, int len); /** send a UBX message, this function just takes the payload and calculates and adds checksum. \param cls the UBX class id \param id the UBX message id \param buf the message payload to write \param len size of the message payload to write \return total bytes written */ virtual int sendUbx(unsigned char cls, unsigned char id, const void* buf = NULL, int len = 0); protected: /** check if the port is writeable (like SerialPipe) \return true if writeable */ bool writeable(void) { return true; } /** Write a character (like SerialPipe) \param c the character to write \return true if succesffully written */ bool putc(int c) { char ch = c; return send(&ch, 1); } /** Write bytes to the physical interface. \param buf the buffer to write \param len size of the buffer to write \return bytes written */ virtual int _send(const void* buf, int len); /** read bytes from the physical interface. \param buf the buffer to read into \param len size of the read buffer \return bytes read */ int _get(char* buf, int len); Pipe<char> _pipe; //!< the rx pipe bool found; //!< flag if device is detected. unsigned char _i2cAdr; //!< the i2c address static const char REGLEN; //!< the length i2c register address static const char REGSTREAM;//!< the stream i2c register address };