xiao sun
fork BLE_API to add update adv payload API
Fork of
BLE_API
by 
Bluetooth Low Energy
Diff: public/Gap.h
- Revision:
- 710:b2e1a2660ec2
- Parent:
- 706:bb924c6a3dd2
--- a/public/Gap.h Fri Jun 19 15:53:06 2015 +0100
+++ b/public/Gap.h Fri Jun 19 15:53:28 2015 +0100
@@ -19,17 +19,13 @@
#include "GapAdvertisingData.h"
#include "GapAdvertisingParams.h"
-#include "GapScanningParams.h"
#include "GapEvents.h"
#include "CallChain.h"
#include "FunctionPointerWithContext.h"
using namespace mbed;
-/* Forward declarations for classes which will only be used for pointers or references in the following. */
-class GapAdvertisingParams;
-class GapScanningParams;
-class GapAdvertisingData;
+class GapScanningParams; /* forward declaration */
class Gap {
public:
@@ -45,11 +41,11 @@
typedef uint8_t Address_t[ADDR_LEN]; /* 48-bit address, LSB format. */
typedef Address_t address_t; /* @Note: deprecated. Use Address_t instead. */
- enum TimeoutSource_t {
- TIMEOUT_SRC_ADVERTISING = 0x00, /**< Advertising timeout. */
- TIMEOUT_SRC_SECURITY_REQUEST = 0x01, /**< Security request timeout. */
- TIMEOUT_SRC_SCAN = 0x02, /**< Scanning timeout. */
- TIMEOUT_SRC_CONN = 0x03, /**< Connection timeout. */
+ enum AdvertisementType_t {
+ ADV_IND = 0x00, /**< Connectable undirected. */
+ ADV_DIRECT_IND = 0x01, /**< Connectable directed. */
+ ADV_SCAN_IND = 0x02, /**< Scannable undirected. */
+ ADV_NONCONN_IND = 0x03, /**< Non connectable undirected. */
};
/**
@@ -60,12 +56,9 @@
* transport library.
*/
enum DisconnectionReason_t {
- CONNECTION_TIMEOUT = 0x08,
- REMOTE_USER_TERMINATED_CONNECTION = 0x13,
- REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES = 0x14, /**< Remote Device Terminated Connection due to low resources.*/
- REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF = 0x15, /**< Remote Device Terminated Connection due to power off. */
- LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
- CONN_INTERVAL_UNACCEPTABLE = 0x3B,
+ REMOTE_USER_TERMINATED_CONNECTION = 0x13,
+ LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
+ CONN_INTERVAL_UNACCEPTABLE = 0x3B,
};
/* Describes the current state of the device (more than one bit can be set) */
@@ -74,7 +67,7 @@
unsigned connected : 1; /**< peripheral is connected to a central */
};
- typedef uint16_t Handle_t; /* Type for connection handle. */
+ typedef uint16_t Handle_t;
typedef struct {
uint16_t minConnectionInterval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
@@ -83,49 +76,58 @@
uint16_t connectionSupervisionTimeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/
} ConnectionParams_t;
- enum Role_t {
- PERIPHERAL = 0x1, /**< Peripheral Role. */
- CENTRAL = 0x2, /**< Central Role. */
+ enum SecurityMode_t {
+ SECURITY_MODE_NO_ACCESS,
+ SECURITY_MODE_ENCRYPTION_OPEN_LINK, /**< require no protection, open link. */
+ SECURITY_MODE_ENCRYPTION_NO_MITM, /**< require encryption, but no MITM protection. */
+ SECURITY_MODE_ENCRYPTION_WITH_MITM, /**< require encryption and MITM protection. */
+ SECURITY_MODE_SIGNED_NO_MITM, /**< require signing or encryption, but no MITM protection. */
+ SECURITY_MODE_SIGNED_WITH_MITM, /**< require signing or encryption, and MITM protection. */
+ };
+
+ /**
+ * @brief Defines possible security status/states.
+ *
+ * @details Defines possible security status/states of a link when requested by getLinkSecurity().
+ */
+ enum LinkSecurityStatus_t {
+ NOT_ENCRYPTED, /**< The link is not secured. */
+ ENCRYPTION_IN_PROGRESS, /**< Link security is being established.*/
+ ENCRYPTED /**< The link is secure.*/
};
- struct AdvertisementCallbackParams_t {
- Address_t peerAddr;
- int8_t rssi;
- bool isScanResponse;
- GapAdvertisingParams::AdvertisingType_t type;
- uint8_t advertisingDataLen;
- const uint8_t *advertisingData;
+ enum SecurityIOCapabilities_t {
+ IO_CAPS_DISPLAY_ONLY = 0x00, /**< Display Only. */
+ IO_CAPS_DISPLAY_YESNO = 0x01, /**< Display and Yes/No entry. */
+ IO_CAPS_KEYBOARD_ONLY = 0x02, /**< Keyboard Only. */
+ IO_CAPS_NONE = 0x03, /**< No I/O capabilities. */
+ IO_CAPS_KEYBOARD_DISPLAY = 0x04, /**< Keyboard and Display. */
};
- typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
-
- struct ConnectionCallbackParams_t {
- Handle_t handle;
- Role_t role;
- AddressType_t peerAddrType;
- Address_t peerAddr;
- AddressType_t ownAddrType;
- Address_t ownAddr;
- const ConnectionParams_t *connectionParams;
- ConnectionCallbackParams_t(Handle_t handleIn,
- Role_t roleIn,
- AddressType_t peerAddrTypeIn,
- const uint8_t *peerAddrIn,
- AddressType_t ownAddrTypeIn,
- const uint8_t *ownAddrIn,
- const ConnectionParams_t *connectionParamsIn) :
- handle(handleIn),
- role(roleIn),
- peerAddrType(peerAddrTypeIn),
- peerAddr(),
- ownAddrType(ownAddrTypeIn),
- ownAddr(),
- connectionParams(connectionParamsIn) {
- memcpy(peerAddr, peerAddrIn, ADDR_LEN);
- memcpy(ownAddr, ownAddrIn, ADDR_LEN);
- }
+ enum SecurityCompletionStatus_t {
+ SEC_STATUS_SUCCESS = 0x00, /**< Procedure completed with success. */
+ SEC_STATUS_TIMEOUT = 0x01, /**< Procedure timed out. */
+ SEC_STATUS_PDU_INVALID = 0x02, /**< Invalid PDU received. */
+ SEC_STATUS_PASSKEY_ENTRY_FAILED = 0x81, /**< Passkey entry failed (user canceled or other). */
+ SEC_STATUS_OOB_NOT_AVAILABLE = 0x82, /**< Out of Band Key not available. */
+ SEC_STATUS_AUTH_REQ = 0x83, /**< Authentication requirements not met. */
+ SEC_STATUS_CONFIRM_VALUE = 0x84, /**< Confirm value failed. */
+ SEC_STATUS_PAIRING_NOT_SUPP = 0x85, /**< Pairing not supported. */
+ SEC_STATUS_ENC_KEY_SIZE = 0x86, /**< Encryption key size. */
+ SEC_STATUS_SMP_CMD_UNSUPPORTED = 0x87, /**< Unsupported SMP command. */
+ SEC_STATUS_UNSPECIFIED = 0x88, /**< Unspecified reason. */
+ SEC_STATUS_REPEATED_ATTEMPTS = 0x89, /**< Too little time elapsed since last attempt. */
+ SEC_STATUS_INVALID_PARAMS = 0x8A, /**< Invalid parameters. */
};
+ /**
+ * Declaration of type containing a passkey to be used during pairing. This
+ * is passed into initializeSecurity() to specify a pre-programmed passkey
+ * for authentication instead of generating a random one.
+ */
+ static const unsigned PASSKEY_LEN = 6;
+ typedef uint8_t Passkey_t[PASSKEY_LEN]; /**< 6-digit passkey in ASCII ('0'-'9' digits only). */
+
static const uint16_t UNIT_1_25_MS = 1250; /**< Number of microseconds in 1.25 milliseconds. */
static const uint16_t UNIT_0_625_MS = 625; /**< Number of microseconds in 0.625 milliseconds. */
static uint16_t MSEC_TO_GAP_DURATION_UNITS(uint32_t durationInMillis) {
@@ -138,564 +140,59 @@
return (gapUnits * UNIT_0_625_MS) / 1000;
}
- typedef void (*TimeoutEventCallback_t)(TimeoutSource_t source);
- typedef void (*ConnectionEventCallback_t)(const ConnectionCallbackParams_t *params);
+ typedef void (*EventCallback_t)(void);
+ typedef void (*ConnectionEventCallback_t)(Handle_t,
+ AddressType_t peerAddrType, const Address_t peerAddr,
+ AddressType_t ownAddrType, const Address_t ownAddr,
+ const ConnectionParams_t *);
+ typedef void (*HandleSpecificEvent_t)(Handle_t handle);
typedef void (*DisconnectionEventCallback_t)(Handle_t, DisconnectionReason_t);
- typedef void (*RadioNotificationEventCallback_t)(bool radio_active); /* gets passed true for ACTIVE; false for INACTIVE. */
-
- /*
- * The following functions are meant to be overridden in the platform-specific sub-class.
- */
-public:
- /**
- * Set the BTLE MAC address and type. Please note that the address format is
- * LSB (least significant byte first). Please refer to Address_t.
- *
- * @return BLE_ERROR_NONE on success.
- */
- virtual ble_error_t setAddress(AddressType_t type, const Address_t address) {
- return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
- }
-
- /**
- * Fetch the BTLE MAC address and type.
- *
- * @return BLE_ERROR_NONE on success.
- */
- virtual ble_error_t getAddress(AddressType_t *typeP, Address_t address) {
- return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
- }
-
- /**
- * @return Minimum Advertising interval in milliseconds.
- */
- virtual uint16_t getMinAdvertisingInterval(void) const {
- return 0; /* default implementation; override this API if this capability is supported. */
- }
-
- /**
- * @return Minimum Advertising interval in milliseconds for non-connectible mode.
- */
- virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const {
- return 0; /* default implementation; override this API if this capability is supported. */
- }
-
- /**
- * @return Maximum Advertising interval in milliseconds.
- */
- virtual uint16_t getMaxAdvertisingInterval(void) const {
- return 0xFFFF; /* default implementation; override this API if this capability is supported. */
- }
-
- virtual ble_error_t stopAdvertising(void) {
- return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
- }
-
- /**
- * Stop scanning. The current scanning parameters remain in effect.
- *
- * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
- */
- virtual ble_error_t stopScan() {
- return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
- }
-
- /**
- * Create a connection (GAP Link Establishment).
- *
- * @param peerAddr
- * 48-bit address, LSB format.
- * @param peerAddrType
- * Address type of the peer.
- * @param connectionParams
- * Connection parameters.
- * @param scanParams
- * Paramters to be used while scanning for the peer.
- * @return BLE_ERROR_NONE if connection establishment procedure is started
- * successfully. The connectionCallback (if set) will be invoked upon
- * a connection event.
- */
- virtual ble_error_t connect(const Address_t peerAddr,
- Gap::AddressType_t peerAddrType,
- const ConnectionParams_t *connectionParams,
- const GapScanningParams *scanParams) {
- return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
- }
-
- /**
- * This call initiates the disconnection procedure, and its completion will
- * be communicated to the application with an invocation of the
- * disconnectionCallback.
- *
- * @param reason
- * The reason for disconnection to be sent back to the peer.
- */
- virtual ble_error_t disconnect(Handle_t connectionHandle, DisconnectionReason_t reason) {
- return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
- }
-
- /**
- * This call initiates the disconnection procedure, and its completion will
- * be communicated to the application with an invocation of the
- * disconnectionCallback.
- *
- * @param reason
- * The reason for disconnection to be sent back to the peer.
- *
- * @note: this version of disconnect() doesn't take a connection handle. It
- * will work reliably only for stacks which are limited to a single
- * connection. This API should be considered *deprecated* in favour of the
- * altertive which takes a connection handle. It will be dropped in the future.
- */
- virtual ble_error_t disconnect(DisconnectionReason_t reason) {
- return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
- }
+ typedef void (*RadioNotificationEventCallback_t) (bool radio_active); /* gets passed true for ACTIVE; false for INACTIVE. */
+ typedef void (*SecuritySetupInitiatedCallback_t)(Handle_t, bool allowBonding, bool requireMITM, SecurityIOCapabilities_t iocaps);
+ typedef void (*SecuritySetupCompletedCallback_t)(Handle_t, SecurityCompletionStatus_t status);
+ typedef void (*LinkSecuredCallback_t)(Handle_t handle, SecurityMode_t securityMode);
+ typedef void (*PasskeyDisplayCallback_t)(Handle_t handle, const Passkey_t passkey);
- /**
- * Get the GAP peripheral preferred connection parameters. These are the
- * defaults that the peripheral would like to have in a connection. The
- * choice of the connection parameters is eventually up to the central.
- *
- * @param[out] params
- * The structure where the parameters will be stored. Memory
- * for this is owned by the caller.
- *
- * @return BLE_ERROR_NONE if the parameters were successfully filled into
- * the given structure pointed to by params.
- */
- virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) {
- return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
- }
-
- /**
- * Set the GAP peripheral preferred connection parameters. These are the
- * defaults that the peripheral would like to have in a connection. The
- * choice of the connection parameters is eventually up to the central.
- *
- * @param[in] params
- * The structure containing the desired parameters.
- */
- virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) {
- return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
- }
-
- /**
- * Update connection parameters while in the peripheral role.
- * @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
- * the central to perform the procedure.
- * @param[in] handle
- * Connection Handle
- * @param[in] params
- * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
- * the parameters in the PPCP characteristic of the GAP service will be used instead.
- */
- virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) {
- return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
- }
-
- /**
- * Set the device name characteristic in the GAP service.
- * @param[in] deviceName
- * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
- */
- virtual ble_error_t setDeviceName(const uint8_t *deviceName) {
- return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
- }
+ struct AdvertisementCallbackParams_t {
+ Address_t peerAddr;
+ int8_t rssi;
+ bool isScanResponse;
+ AdvertisementType_t type;
+ uint8_t advertisingDataLen;
+ const uint8_t *advertisingData;
+ };
+ typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
- /**
- * Get the value of the device name characteristic in the GAP service.
- * @param[out] deviceName
- * Pointer to an empty buffer where the UTF-8 *non NULL-
- * terminated* string will be placed. Set this
- * value to NULL in order to obtain the deviceName-length
- * from the 'length' parameter.
- *
- * @param[in/out] lengthP
- * (on input) Length of the buffer pointed to by deviceName;
- * (on output) the complete device name length (without the
- * null terminator).
- *
- * @note If the device name is longer than the size of the supplied buffer,
- * length will return the complete device name length, and not the
- * number of bytes actually returned in deviceName. The application may
- * use this information to retry with a suitable buffer size.
- */
- virtual ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
- return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
- }
-
- /**
- * Set the appearance characteristic in the GAP service.
- * @param[in] appearance
- * The new value for the device-appearance.
- */
- virtual ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
- return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
- }
-
- /**
- * Get the appearance characteristic in the GAP service.
- * @param[out] appearance
- * The new value for the device-appearance.
- */
- virtual ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
- return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
- }
-
- /**
- * Set the radio's transmit power.
- * @param[in] txPower Radio transmit power in dBm.
- */
- virtual ble_error_t setTxPower(int8_t txPower) {
- return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
- }
-
- /**
- * Query the underlying stack for permitted arguments for setTxPower().
- *
- * @param[out] valueArrayPP
- * Out parameter to receive the immutable array of Tx values.
- * @param[out] countP
- * Out parameter to receive the array's size.
- */
- virtual void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
- *countP = 0; /* default implementation; override this API if this capability is supported. */
- }
-
-protected:
- /* Override the following in the underlying adaptation layer to provide the functionality of scanning. */
- virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) {
- return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
- }
-
- /*
- * APIs with non-virtual implementations.
- */
-public:
- /**
- * Returns the current GAP state of the device using a bitmask which
- * describes whether the device is advertising and/or connected.
- */
- GapState_t getState(void) const {
- return state;
- }
-
- /**
- * Set the GAP advertising mode to use for this device.
- */
- void setAdvertisingType(GapAdvertisingParams::AdvertisingType_t advType) {
- _advParams.setAdvertisingType(advType);
- }
+ friend class BLEDevice;
- /**
- * @param[in] interval
- * Advertising interval in units of milliseconds. Advertising
- * is disabled if interval is 0. If interval is smaller than
- * the minimum supported value, then the minimum supported
- * value is used instead. This minimum value can be discovered
- * using getMinAdvertisingInterval().
- *
- * This field must be set to 0 if connectionMode is equal
- * to ADV_CONNECTABLE_DIRECTED.
- *
- * @note: Decreasing this value will allow central devices to detect a
- * peripheral faster at the expense of more power being used by the radio
- * due to the higher data transmit rate.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAdvertisingInterval(...) should now be achieved using
- * ble.gap().setAdvertisingInterval(...).
- *
- * @Note: [WARNING] This API previously used 0.625ms as the unit for its
- * 'interval' argument. That required an explicit conversion from
- * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
- * no longer required as the new units are milliseconds. Any application
- * code depending on the old semantics would need to be updated accordingly.
- */
- void setAdvertisingInterval(uint16_t interval) {
- if (interval == 0) {
- stopAdvertising();
- } else if (interval < getMinAdvertisingInterval()) {
- interval = getMinAdvertisingInterval();
- }
- _advParams.setInterval(MSEC_TO_ADVERTISEMENT_DURATION_UNITS(interval));
- }
-
- /**
- * @param[in] timeout
- * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
- * and 16383). Use 0 to disable the advertising timeout.
- */
- void setAdvertisingTimeout(uint16_t timeout) {
- _advParams.setTimeout(timeout);
- }
-
- /**
- * Start advertising.
- */
- ble_error_t startAdvertising(void) {
- setAdvertisingData(); /* update the underlying stack */
- return startAdvertising(_advParams);
- }
-
- /**
- * Reset any advertising payload prepared from prior calls to
- * accumulateAdvertisingPayload(). This automatically propagates the re-
- * initialized adv payload to the underlying stack.
- *
- * Note: This should be followed by a call to setAdvertisingPayload() or
- * startAdvertising() before the update takes effect.
- */
- void clearAdvertisingPayload(void) {
- _advPayload.clear();
- setAdvertisingData();
- }
-
- /**
- * Accumulate an AD structure in the advertising payload. Please note that
- * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
- * as an additional 31 bytes if the advertising payload proves to be too
- * small.
- *
- * @param[in] flags
- * The flags to be added. Please refer to
- * GapAdvertisingData::Flags for valid flags. Multiple
- * flags may be specified in combination.
- */
- ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
- ble_error_t rc;
- if ((rc = _advPayload.addFlags(flags)) != BLE_ERROR_NONE) {
- return rc;
- }
-
- return setAdvertisingData();
- }
-
- /**
- * Accumulate an AD structure in the advertising payload. Please note that
- * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
- * as an additional 31 bytes if the advertising payload proves to be too
- * small.
- *
- * @param app
- * The appearance of the peripheral.
- */
- ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
- setAppearance(app);
-
- ble_error_t rc;
- if ((rc = _advPayload.addAppearance(app)) != BLE_ERROR_NONE) {
- return rc;
- }
-
- return setAdvertisingData();
- }
-
- /**
- * Accumulate an AD structure in the advertising payload. Please note that
- * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
- * as an additional 31 bytes if the advertising payload proves to be too
- * small.
- *
- * @param app
- * The max transmit power to be used by the controller. This is
- * only a hint.
- */
- ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
- ble_error_t rc;
- if ((rc = _advPayload.addTxPower(power)) != BLE_ERROR_NONE) {
- return rc;
- }
-
- return setAdvertisingData();
- }
-
- /**
- * Accumulate a variable length byte-stream as an AD structure in the
- * advertising payload. Please note that the payload is limited to 31 bytes.
- * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
- * advertising payload proves to be too small.
- *
- * @param type The type which describes the variable length data.
- * @param data data bytes.
- * @param len length of data.
- */
- ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
- if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
- setDeviceName(data);
- }
-
- ble_error_t rc;
- if ((rc = _advPayload.addData(type, data, len)) != BLE_ERROR_NONE) {
- return rc;
- }
-
- return setAdvertisingData();
- }
+private:
+ /* These functions must be defined in the sub-class */
+ virtual ble_error_t setAddress(AddressType_t type, const Address_t address) = 0;
+ virtual ble_error_t getAddress(AddressType_t *typeP, Address_t address) = 0;
+ virtual ble_error_t setAdvertisingData(const GapAdvertisingData &, const GapAdvertisingData &) = 0;
+ virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
+ virtual ble_error_t stopAdvertising(void) = 0;
+ virtual ble_error_t stopScan() = 0;
+ virtual uint16_t getMinAdvertisingInterval(void) const = 0;
+ virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const = 0;
+ virtual uint16_t getMaxAdvertisingInterval(void) const = 0;
+ virtual ble_error_t disconnect(DisconnectionReason_t reason) = 0;
+ virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) = 0;
+ virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) = 0;
+ virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) = 0;
- /**
- * Setup a particular, user-constructed advertisement payload for the
- * underlying stack. It would be uncommon for this API to be used directly;
- * there are other APIs to build an advertisement payload (see above).
- */
- ble_error_t setAdvertisingPayload(const GapAdvertisingData &payload) {
- _advPayload = payload;
- return setAdvertisingData();
- }
-
- /**
- * @return Read back advertising data. Useful for storing and
- * restoring payload.
- */
- const GapAdvertisingData &getAdvertisingPayload(void) const {
- return _advPayload;
- }
-
- /**
- * Accumulate a variable length byte-stream as an AD structure in the
- * scanResponse payload.
- *
- * @param[in] type The type which describes the variable length data.
- * @param[in] data data bytes.
- * @param[in] len length of data.
- */
- ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
- ble_error_t rc;
- if ((rc = _scanResponse.addData(type, data, len)) != BLE_ERROR_NONE) {
- return rc;
- }
-
- return setAdvertisingData();
- }
-
- /**
- * Reset any scan response prepared from prior calls to
- * accumulateScanResponse().
- *
- * Note: This should be followed by a call to setAdvertisingPayload() or
- * startAdvertising() before the update takes effect.
- */
- void clearScanResponse(void) {
- _scanResponse.clear();
- setAdvertisingData();
- }
+ virtual ble_error_t purgeAllBondingState(void) = 0;
+ virtual ble_error_t getLinkSecurity(Handle_t connectionHandle, LinkSecurityStatus_t *securityStatusP) = 0;
- /**
- * Setup parameters for GAP scanning--i.e. observer mode.
- * @param[in] interval
- * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
- * @param[in] window
- * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
- * @param[in] timeout
- * Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
- * @param[in] activeScanning
- * Set to True if active-scanning is required. This is used to fetch the
- * scan response from a peer if possible.
- *
- * The scanning window divided by the interval determines the duty cycle for
- * scanning. For example, if the interval is 100ms and the window is 10ms,
- * then the controller will scan for 10 percent of the time. It is possible
- * to have the interval and window set to the same value. In this case,
- * scanning is continuous, with a change of scanning frequency once every
- * interval.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- *
- * @Note: The scan interval and window are recommendations to the BLE stack.
- */
- ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
- uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
- uint16_t timeout = 0,
- bool activeScanning = false) {
- ble_error_t rc;
- if (((rc = _scanningParams.setInterval(interval)) == BLE_ERROR_NONE) &&
- ((rc = _scanningParams.setWindow(window)) == BLE_ERROR_NONE) &&
- ((rc = _scanningParams.setTimeout(timeout)) == BLE_ERROR_NONE)) {
- _scanningParams.setActiveScanning(activeScanning);
- return BLE_ERROR_NONE;
- }
-
- return rc;
- }
+ virtual ble_error_t setDeviceName(const uint8_t *deviceName) = 0;
+ virtual ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) = 0;
+ virtual ble_error_t setAppearance(uint16_t appearance) = 0;
+ virtual ble_error_t getAppearance(uint16_t *appearanceP) = 0;
- /**
- * Setup the scanInterval parameter for GAP scanning--i.e. observer mode.
- * @param[in] interval
- * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
- *
- * The scanning window divided by the interval determines the duty cycle for
- * scanning. For example, if the interval is 100ms and the window is 10ms,
- * then the controller will scan for 10 percent of the time. It is possible
- * to have the interval and window set to the same value. In this case,
- * scanning is continuous, with a change of scanning frequency once every
- * interval.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- */
- ble_error_t setScanInterval(uint16_t interval) {
- return _scanningParams.setInterval(interval);
- }
-
- /**
- * Setup the scanWindow parameter for GAP scanning--i.e. observer mode.
- * @param[in] window
- * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
- *
- * The scanning window divided by the interval determines the duty cycle for
- * scanning. For example, if the interval is 100ms and the window is 10ms,
- * then the controller will scan for 10 percent of the time. It is possible
- * to have the interval and window set to the same value. In this case,
- * scanning is continuous, with a change of scanning frequency once every
- * interval.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- */
- ble_error_t setScanWindow(uint16_t window) {
- return _scanningParams.setWindow(window);
- }
-
- /**
- * Setup parameters for GAP scanning--i.e. observer mode.
- * @param[in] timeout
- * Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- */
- ble_error_t setScanTimeout(uint16_t timeout) {
- return _scanningParams.setTimeout(timeout);
- }
-
- /**
- * Setup parameters for GAP scanning--i.e. observer mode.
- * @param[in] activeScanning
- * Set to True if active-scanning is required. This is used to fetch the
- * scan response from a peer if possible.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- */
- void setActiveScanning(bool activeScanning) {
- _scanningParams.setActiveScanning(activeScanning);
- }
-
- /**
- * Start scanning (Observer Procedure) based on the parameters currently in
- * effect.
- *
- * @param[in] callback
- * The application specific callback to be invoked upon
- * receiving every advertisement report. This can be passed in
- * as NULL, in which case scanning may not be enabled at all.
- */
- ble_error_t startScan(void (*callback)(const AdvertisementCallbackParams_t *params)) {
+ ble_error_t startScan(const GapScanningParams &scanningParams, void (*callback)(const AdvertisementCallbackParams_t *params)) {
ble_error_t err = BLE_ERROR_NONE;
if (callback) {
- if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
+ if ((err = startRadioScan(scanningParams)) == BLE_ERROR_NONE) {
onAdvertisementReport.attach(callback);
}
}
@@ -703,14 +200,11 @@
return err;
}
- /**
- * Same as above, but this takes an (object, method) pair for a callback.
- */
template<typename T>
- ble_error_t startScan(T *object, void (T::*callbackMember)(const AdvertisementCallbackParams_t *params)) {
+ ble_error_t startScan(const GapScanningParams &scanningParams, T *object, void (T::*callbackMember)(const AdvertisementCallbackParams_t *params)) {
ble_error_t err = BLE_ERROR_NONE;
if (object && callbackMember) {
- if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
+ if ((err = startRadioScan(scanningParams)) == BLE_ERROR_NONE) {
onAdvertisementReport.attach(object, callbackMember);
}
}
@@ -718,133 +212,144 @@
return err;
}
-private:
- ble_error_t setAdvertisingData(void) {
- return setAdvertisingData(_advPayload, _scanResponse);
- }
-
-private:
- virtual ble_error_t setAdvertisingData(const GapAdvertisingData &, const GapAdvertisingData &) = 0;
- virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
-
-public:
- /**
- * Accessors to read back currently active advertising params.
- */
- GapAdvertisingParams &getAdvertisingParams(void) {
- return _advParams;
- }
- const GapAdvertisingParams &getAdvertisingParams(void) const {
- return _advParams;
- }
+protected:
+ virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) = 0;
- /**
- * Setup a particular, user-constructed set of advertisement parameters for
- * the underlying stack. It would be uncommon for this API to be used
- * directly; there are other APIs to tweak advertisement parameters
- * individually.
- */
- void setAdvertisingParams(const GapAdvertisingParams &newParams) {
- _advParams = newParams;
- }
-
- /* Event callback handlers. */
-public:
- /**
- * Setup a callback for timeout events. Refer to TimeoutSource_t for
- * possible event types.
- */
- void onTimeout(TimeoutEventCallback_t callback) {timeoutCallback = callback;}
-
- /**
- * Setup a callback for connection events. Refer to ConnectionEventCallback_t.
- */
- void onConnection(ConnectionEventCallback_t callback) {connectionCallback = callback;}
+ /* Event callback handlers */
+ void setOnTimeout(EventCallback_t callback) {onTimeout = callback;}
+ void setOnConnection(ConnectionEventCallback_t callback) {onConnection = callback;}
/**
* Set the application callback for disconnection events.
* @param callback
* Pointer to the unique callback.
*/
- void onDisconnection(DisconnectionEventCallback_t callback) {disconnectionCallback = callback;}
+ void setOnDisconnection(DisconnectionEventCallback_t callback) {onDisconnection = callback;}
+
+ /**
+ * Set the application callback for radio-notification events.
+ * @param callback
+ * Handler to be executed in response to a radio notification event.
+ */
+ virtual void setOnRadioNotification(RadioNotificationEventCallback_t callback) {onRadioNotification = callback;}
+
+ /**
+ * To indicate that security procedure for link has started.
+ */
+ virtual void setOnSecuritySetupInitiated(SecuritySetupInitiatedCallback_t callback) {onSecuritySetupInitiated = callback;}
+
+ /**
+ * To indicate that security procedure for link has completed.
+ */
+ virtual void setOnSecuritySetupCompleted(SecuritySetupCompletedCallback_t callback) {onSecuritySetupCompleted = callback;}
+
+ /**
+ * To indicate that link with the peer is secured. For bonded devices,
+ * subsequent re-connections with bonded peer will result only in this callback
+ * when the link is secured and setup procedures will not occur unless the
+ * bonding information is either lost or deleted on either or both sides.
+ */
+ virtual void setOnLinkSecured(LinkSecuredCallback_t callback) {onLinkSecured = callback;}
+
+ /**
+ * To indicate that device context is stored persistently.
+ */
+ virtual void setOnSecurityContextStored(HandleSpecificEvent_t callback) {onSecurityContextStored = callback;}
+
+ /**
+ * To set the callback for when the passkey needs to be displayed on a peripheral with DISPLAY capability.
+ */
+ virtual void setOnPasskeyDisplay(PasskeyDisplayCallback_t callback) {onPasskeyDisplay = callback;}
/**
* Append to a chain of callbacks to be invoked upon disconnection; these
* callbacks receive no context and are therefore different from the
- * disconnectionCallback callback.
+ * onDisconnection callback.
* @param callback
* function pointer to be invoked upon disconnection; receives no context.
+ *
+ * @note the disconnection CallChain should have been merged with
+ * onDisconnctionCallback; but this was not possible because
+ * FunctionPointer (which is a building block for CallChain) doesn't
+ * accept variadic templates.
*/
template<typename T>
void addToDisconnectionCallChain(T *tptr, void (T::*mptr)(void)) {disconnectionCallChain.add(tptr, mptr);}
- /**
- * Set the application callback for radio-notification events.
- *
- * Radio Notification is a feature that enables ACTIVE and INACTIVE
- * (nACTIVE) signals from the stack that notify the application when the
- * radio is in use. The signal is sent using software interrupt.
- *
- * The ACTIVE signal is sent before the Radio Event starts. The nACTIVE
- * signal is sent at the end of the Radio Event. These signals can be used
- * by the application programmer to synchronize application logic with radio
- * activity. For example, the ACTIVE signal can be used to shut off external
- * devices to manage peak current drawn during periods when the radio is on,
- * or to trigger sensor data collection for transmission in the Radio Event.
- *
- * @param callback
- * The application handler to be invoked in response to a radio
- * ACTIVE/INACTIVE event.
- */
- virtual void onRadioNotification(RadioNotificationEventCallback_t callback) {radioNotificationCallback = callback;}
+private:
+ GapState_t getState(void) const {
+ return state;
+ }
protected:
Gap() :
- _advParams(),
- _advPayload(),
- _scanningParams(),
- _scanResponse(),
state(),
- timeoutCallback(NULL),
- connectionCallback(NULL),
- disconnectionCallback(NULL),
- radioNotificationCallback(),
+ onTimeout(NULL),
+ onConnection(NULL),
+ onDisconnection(NULL),
+ onRadioNotification(),
+ onSecuritySetupInitiated(),
+ onSecuritySetupCompleted(),
+ onLinkSecured(),
+ onSecurityContextStored(),
+ onPasskeyDisplay(),
onAdvertisementReport(),
disconnectionCallChain() {
- _advPayload.clear();
- _scanResponse.clear();
+ /* empty */
}
- /* Entry points for the underlying stack to report events back to the user. */
public:
- void processConnectionEvent(Handle_t handle,
- Role_t role,
- AddressType_t peerAddrType,
- const Address_t peerAddr,
- AddressType_t ownAddrType,
- const Address_t ownAddr,
- const ConnectionParams_t *connectionParams) {
+ void processConnectionEvent(Handle_t handle, AddressType_t peerAddrType, const Address_t peerAddr, AddressType_t ownAddrType, const Address_t ownAddr, const ConnectionParams_t *params) {
state.connected = 1;
- if (connectionCallback) {
- ConnectionCallbackParams_t callbackParams(handle, role, peerAddrType, peerAddr, ownAddrType, ownAddr, connectionParams);
- connectionCallback(&callbackParams);
+ if (onConnection) {
+ onConnection(handle, peerAddrType, peerAddr, ownAddrType, ownAddr, params);
}
}
void processDisconnectionEvent(Handle_t handle, DisconnectionReason_t reason) {
state.connected = 0;
- if (disconnectionCallback) {
- disconnectionCallback(handle, reason);
+ if (onDisconnection) {
+ onDisconnection(handle, reason);
}
disconnectionCallChain.call();
}
- void processAdvertisementReport(const Address_t peerAddr,
- int8_t rssi,
- bool isScanResponse,
- GapAdvertisingParams::AdvertisingType_t type,
- uint8_t advertisingDataLen,
- const uint8_t *advertisingData) {
+ void processSecuritySetupInitiatedEvent(Handle_t handle, bool allowBonding, bool requireMITM, SecurityIOCapabilities_t iocaps) {
+ if (onSecuritySetupInitiated) {
+ onSecuritySetupInitiated(handle, allowBonding, requireMITM, iocaps);
+ }
+ }
+
+ void processSecuritySetupCompletedEvent(Handle_t handle, SecurityCompletionStatus_t status) {
+ if (onSecuritySetupCompleted) {
+ onSecuritySetupCompleted(handle, status);
+ }
+ }
+
+ void processLinkSecuredEvent(Handle_t handle, SecurityMode_t securityMode) {
+ if (onLinkSecured) {
+ onLinkSecured(handle, securityMode);
+ }
+ }
+
+ void processSecurityContextStoredEvent(Handle_t handle) {
+ if (onSecurityContextStored) {
+ onSecurityContextStored(handle);
+ }
+ }
+
+ void processPasskeyDisplayEvent(Handle_t handle, const Passkey_t passkey) {
+ if (onPasskeyDisplay) {
+ onPasskeyDisplay(handle, passkey);
+ }
+ }
+
+ void processAdvertisementReport(const Address_t peerAddr,
+ int8_t rssi,
+ bool isScanResponse,
+ AdvertisementType_t type,
+ uint8_t advertisingDataLen,
+ const uint8_t *advertisingData) {
AdvertisementCallbackParams_t params;
memcpy(params.peerAddr, peerAddr, ADDR_LEN);
params.rssi = rssi;
@@ -855,25 +360,32 @@
onAdvertisementReport.call(¶ms);
}
- void processTimeoutEvent(TimeoutSource_t source) {
- if (timeoutCallback) {
- timeoutCallback(source);
+ void processEvent(GapEvents::gapEvent_e type) {
+ switch (type) {
+ case GapEvents::GAP_EVENT_TIMEOUT:
+ state.advertising = 0;
+ if (onTimeout) {
+ onTimeout();
+ }
+ break;
+ default:
+ break;
}
}
protected:
- GapAdvertisingParams _advParams;
- GapAdvertisingData _advPayload;
- GapScanningParams _scanningParams;
- GapAdvertisingData _scanResponse;
-
GapState_t state;
protected:
- TimeoutEventCallback_t timeoutCallback;
- ConnectionEventCallback_t connectionCallback;
- DisconnectionEventCallback_t disconnectionCallback;
- RadioNotificationEventCallback_t radioNotificationCallback;
+ EventCallback_t onTimeout;
+ ConnectionEventCallback_t onConnection;
+ DisconnectionEventCallback_t onDisconnection;
+ RadioNotificationEventCallback_t onRadioNotification;
+ SecuritySetupInitiatedCallback_t onSecuritySetupInitiated;
+ SecuritySetupCompletedCallback_t onSecuritySetupCompleted;
+ LinkSecuredCallback_t onLinkSecured;
+ HandleSpecificEvent_t onSecurityContextStored;
+ PasskeyDisplayCallback_t onPasskeyDisplay;
AdvertisementReportCallback_t onAdvertisementReport;
CallChain disconnectionCallChain;