Diff: public/DiscoveredCharacteristic.h

Revision:

710:b2e1a2660ec2

Parent:

709:77f6fc6999cd

Child:

711:ea0c4bf9ec99

--- a/public/DiscoveredCharacteristic.h	Fri Jun 19 15:53:06 2015 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,191 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __DISCOVERED_CHARACTERISTIC_H__
-#define __DISCOVERED_CHARACTERISTIC_H__
-
-#include "UUID.h"
-#include "Gap.h"
-#include "GattAttribute.h"
-#include "GattClient.h"
-
-/**
- * Structure for holding information about the service and the characteristics
- * found during the discovery process.
- */
-class DiscoveredCharacteristic {
-public:
-    struct Properties_t {
-        uint8_t _broadcast       :1; /**< Broadcasting of the value permitted. */
-        uint8_t _read            :1; /**< Reading the value permitted. */
-        uint8_t _writeWoResp     :1; /**< Writing the value with Write Command permitted. */
-        uint8_t _write           :1; /**< Writing the value with Write Request permitted. */
-        uint8_t _notify          :1; /**< Notications of the value permitted. */
-        uint8_t _indicate        :1; /**< Indications of the value permitted. */
-        uint8_t _authSignedWrite :1; /**< Writing the value with Signed Write Command permitted. */
-
-    public:
-        bool broadcast(void)       const {return _broadcast;      }
-        bool read(void)            const {return _read;           }
-        bool writeWoResp(void)     const {return _writeWoResp;    }
-        bool write(void)           const {return _write;          }
-        bool notify(void)          const {return _notify;         }
-        bool indicate(void)        const {return _indicate;       }
-        bool authSignedWrite(void) const {return _authSignedWrite;}
-
-    private:
-        operator uint8_t()  const; /* disallow implicit conversion into an integer */
-        operator unsigned() const; /* disallow implicit conversion into an integer */
-    };
-
-    /**
-     * Structure for holding information about the service and the characteristics
-     * found during the discovery process.
-     */
-    struct DiscoveredDescriptor {
-        GattAttribute::Handle_t handle; /**< Descriptor Handle. */
-        UUID                    uuid;   /**< Descriptor UUID. */
-    };
-
-    /**
-     * Callback type for when a characteristic descriptor is found during descriptor-
-     * discovery. The receiving function is passed in a pointer to a
-     * DiscoveredDescriptor object which will remain valid for the lifetime
-     * of the callback. Memory for this object is owned by the BLE_API eventing
-     * framework. The application can safely make a persistent shallow-copy of
-     * this object in order to work with the characteristic beyond the callback.
-     */
-    typedef void (*DescriptorCallback_t)(const DiscoveredDescriptor *);
-
-    /**
-     * Initiate (or continue) a read for the value attribute, optionally at a
-     * given offset. If the Characteristic or Descriptor to be read is longer
-     * than ATT_MTU - 1, this function must be called multiple times with
-     * appropriate offset to read the complete value.
-     *
-     * @return BLE_ERROR_NONE if a read has been initiated, else
-     *         BLE_ERROR_INVALID_STATE if some internal state about the connection is invalid, or
-     *         BLE_STACK_BUSY if some client procedure already in progress, or
-     *         BLE_ERROR_OPERATION_NOT_PERMITTED due to the characteristic's properties.
-     */
-    ble_error_t read(uint16_t offset = 0) const;
-
-    /**
-     * Perform a write without response procedure.
-     *
-     * @param  length
-     *           The amount of data being written.
-     * @param  value
-     *           The bytes being written.
-     *
-     * @note   It is important to note that a write without response will generate
-     *         an onDataSent() callback when the packet has been transmitted. There
-     *         will be a BLE-stack specific limit to the number of pending
-     *         writeWoResponse operations; the user may want to use the onDataSent()
-     *         callback for flow-control.
-     *
-     * @retval BLE_ERROR_NONE Successfully started the Write procedure, else
-     *         BLE_ERROR_INVALID_STATE if some internal state about the connection is invalid, or
-     *         BLE_STACK_BUSY if some client procedure already in progress, or
-     *         BLE_ERROR_NO_MEM if there are no available buffers left to process the request, or
-     *         BLE_ERROR_OPERATION_NOT_PERMITTED due to the characteristic's properties.
-     */
-    ble_error_t writeWoResponse(uint16_t length, const uint8_t *value) const;
-
-    /**
-     * Initiate a GATT Characteristic Descriptor Discovery procedure for descriptors within this characteristic.
-     *
-     * @param  callback
-     * @param  matchingUUID
-     *           filter for descriptors. Defaults to wildcard which will discover all descriptors.
-     *
-     * @return  BLE_ERROR_NONE if descriptor discovery is launched successfully; else an appropriate error.
-     */
-    ble_error_t discoverDescriptors(DescriptorCallback_t callback, const UUID &matchingUUID = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN)) const;
-
-    /**
-     * Perform a write procedure.
-     *
-     * @param  length
-     *           The amount of data being written.
-     * @param  value
-     *           The bytes being written.
-     *
-     * @note   It is important to note that a write will generate
-     *         an onDataWritten() callback when the peer acknowledges the request.
-     *
-     * @retval BLE_ERROR_NONE Successfully started the Write procedure, else
-     *         BLE_ERROR_INVALID_STATE if some internal state about the connection is invalid, or
-     *         BLE_STACK_BUSY if some client procedure already in progress, or
-     *         BLE_ERROR_NO_MEM if there are no available buffers left to process the request, or
-     *         BLE_ERROR_OPERATION_NOT_PERMITTED due to the characteristic's properties.
-     */
-    ble_error_t write(uint16_t length, const uint8_t *value) const;
-
-    static void setupOnDataRead(GattClient::ReadCallback_t callback) {
-        onDataReadCallback = callback;
-    }
-
-    static void setupOnDataWrite(GattClient::WriteCallback_t callback) {
-        onDataWriteCallback = callback;
-    }
-
-    void setupLongUUID(UUID::LongUUIDBytes_t longUUID) {
-        uuid.setupLong(longUUID);
-    }
-
-public:
-    UUID::ShortUUIDBytes_t getShortUUID(void) const {
-        return uuid.getShortUUID();
-    }
-
-    const Properties_t& getProperties(void) const {
-        return props;
-    }
-
-    const GattAttribute::Handle_t& getDeclHandle(void) const {
-        return declHandle;
-    }
-    const GattAttribute::Handle_t& getValueHandle(void) const {
-        return valueHandle;
-    }
-
-public:
-    DiscoveredCharacteristic() : gattc(NULL),
-                                 uuid(UUID::ShortUUIDBytes_t(0)),
-                                 props(),
-                                 declHandle(GattAttribute::INVALID_HANDLE),
-                                 valueHandle(GattAttribute::INVALID_HANDLE) {
-        /* empty */
-    }
-
-protected:
-    GattClient              *gattc;
-
-protected:
-    UUID                     uuid;
-    Properties_t             props;
-    GattAttribute::Handle_t  declHandle;
-    GattAttribute::Handle_t  valueHandle;
-
-    Gap::Handle_t            connHandle;
-
-public:
-    static GattClient::ReadCallback_t  onDataReadCallback;
-    static GattClient::WriteCallback_t onDataWriteCallback;
-};
-
-#endif /*__DISCOVERED_CHARACTERISTIC_H__*/
\ No newline at end of file