Diff: ble/GapScanningParams.h

Revision:

714:a6130aaa0fd9

Parent:

713:9f4251b3355c

Child:

715:6d415ac147aa

--- a/ble/GapScanningParams.h	Fri Jun 19 23:45:12 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,63 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
-*/
-
-#ifndef __GAP_SCANNING_PARAMS_H__
-#define __GAP_SCANNING_PARAMS_H__
-
-class GapScanningParams {
-public:
-    static const unsigned SCAN_INTERVAL_MIN = 0x0004; /**< Minimum Scan interval in 625 us units, i.e. 2.5 ms. */
-    static const unsigned SCAN_INTERVAL_MAX = 0x4000; /**< Maximum Scan interval in 625 us units, i.e. 10.24 s. */
-    static const unsigned SCAN_WINDOW_MIN   = 0x0004; /**< Minimum Scan window in 625 us units, i.e. 2.5 ms. */
-    static const unsigned SCAN_WINDOW_MAX   = 0x4000; /**< Maximum Scan window in 625 us units, i.e. 10.24 s. */
-    static const unsigned SCAN_TIMEOUT_MIN  = 0x0001; /**< Minimum Scan timeout in seconds. */
-    static const unsigned SCAN_TIMEOUT_MAX  = 0xFFFF; /**< Maximum Scan timeout in seconds. */
-
-public:
-    GapScanningParams(uint16_t interval       = SCAN_INTERVAL_MAX,
-                      uint16_t window         = SCAN_WINDOW_MAX,
-                      uint16_t timeout        = 0,
-                      bool     activeScanning = false);
-
-    ble_error_t setInterval(uint16_t newIntervalInMS);
-
-    ble_error_t setWindow(uint16_t newWindowInMS);
-
-    ble_error_t setTimeout(uint16_t newTimeout);
-
-    void        setActiveScanning(bool activeScanning);
-
-public:
-    /* @Note: The following return durations in units of 0.625 ms */
-    uint16_t getInterval(void) const {return _interval;}
-    uint16_t getWindow(void)   const {return _window;  }
-
-    uint16_t getTimeout(void)  const {return _timeout; }
-    bool     getActiveScanning(void) const {return _activeScanning;}
-
-private:
-    uint16_t _interval; /**< Scan interval in units of 625us (between 2.5ms to 10.24s). */
-    uint16_t _window;   /**< Scan window in units of 625us (between 2.5ms to 10.24s). */
-    uint16_t _timeout;  /**< Scan timeout between 0x0001 and 0xFFFF in seconds, 0x0000 disables timeout. */
-    bool     _activeScanning; /**< obtain not only the advertising data from the peer device, but also their scanResponse if possible. */
-
-private:
-    /* disallow copy constructor */
-    GapScanningParams(const GapScanningParams &);
-    GapScanningParams& operator =(const GapScanningParams &in);
-};
-
-#endif // ifndef __GAP_SCANNING_PARAMS_H__
\ No newline at end of file