Cristi Stoican
jgh
Fork of
BLE_API
by 
Bluetooth Low Energy
Diff: ble/BLE.h
- Revision:
- 1176:8b308f971420
- Parent:
- 1175:1d25cd85e851
- Child:
- 1179:4ab722f8dca0
diff -r 1d25cd85e851 -r 8b308f971420 ble/BLE.h
--- a/ble/BLE.h Wed Apr 06 19:15:22 2016 +0100
+++ b/ble/BLE.h Wed Apr 06 19:15:24 2016 +0100
@@ -270,7 +270,8 @@
* Set the BTLE MAC address and type.
* @return BLE_ERROR_NONE on success.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::setAddress(). A former call to
* ble.setAddress(...) should be replaced with
* ble.gap().setAddress(...).
*/
@@ -282,7 +283,8 @@
* Fetch the Bluetooth Low Energy MAC address and type.
* @return BLE_ERROR_NONE on success.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::getAddress(). A former call to
* ble.getAddress(...) should be replaced with
* ble.gap().getAddress(...).
*/
@@ -293,7 +295,8 @@
/**
* Set the GAP advertising mode to use for this device.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::setAdvertisingType(). A former call to
* ble.setAdvertisingType(...) should be replaced with
* ble.gap().setAdvertisingType(...).
*/
@@ -316,7 +319,8 @@
* peripheral faster, at the expense of more power being used by the radio
* due to the higher data transmit rate.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::setAdvertisingInterval(). A former call to
* ble.setAdvertisingInterval(...) should be replaced with
* ble.gap().setAdvertisingInterval(...).
*
@@ -333,7 +337,8 @@
/**
* @return Minimum Advertising interval in milliseconds.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::getMinAdvertisingInterval(). A former call to
* ble.getMinAdvertisingInterval(...) should be replaced with
* ble.gap().getMinAdvertisingInterval(...).
*/
@@ -344,7 +349,8 @@
/**
* @return Minimum Advertising interval in milliseconds for non-connectible mode.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::MinNonConnectableAdvertisingInterval(). A former call to
* ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
* ble.gap().getMinNonConnectableAdvertisingInterval(...).
*/
@@ -355,7 +361,8 @@
/**
* @return Maximum Advertising interval in milliseconds.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::getMaxAdvertisingInterval(). A former call to
* ble.getMaxAdvertisingInterval(...) should be replaced with
* ble.gap().getMaxAdvertisingInterval(...).
*/
@@ -368,7 +375,8 @@
* Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
* and 16383). Use 0 to disable the advertising timeout.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::setAdvertisingTimeout(). A former call to
* ble.setAdvertisingTimeout(...) should be replaced with
* ble.gap().setAdvertisingTimeout(...).
*/
@@ -382,7 +390,8 @@
* directly; there are other APIs to tweak advertisement parameters
* individually (see above).
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::setAdvertisingParams(). A former call to
* ble.setAdvertisingParams(...) should be replaced with
* ble.gap().setAdvertisingParams(...).
*/
@@ -394,7 +403,8 @@
* @return Read back advertising parameters. Useful for storing and
* restoring parameters rapidly.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::getAdvertisingParams(). A former call to
* ble.getAdvertisingParams(...) should be replaced with
* ble.gap().getAdvertisingParams(...).
*/
@@ -413,7 +423,8 @@
* GapAdvertisingData::Flags for valid flags. Multiple
* flags may be specified in combination.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::accumulateAdvertisingPayload(uint8_t). A former call to
* ble.accumulateAdvertisingPayload(flags) should be replaced with
* ble.gap().accumulateAdvertisingPayload(flags).
*/
@@ -430,8 +441,10 @@
* @param[in] app
* The appearance of the peripheral.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
- * ble.accumulateAdvertisingPayload(appearance) should be replaced with
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::accumulateAdvertisingPayload(GapAdvertisingData::Appearance).
+ * A former call to ble.accumulateAdvertisingPayload(appearance)
+ * should be replaced with
* ble.gap().accumulateAdvertisingPayload(appearance).
*/
ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
@@ -448,7 +461,8 @@
* The max transmit power to be used by the controller. This
* is only a hint.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::accumulateAdvertisingPayloadTxPower(). A former call to
* ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
* ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
*/
@@ -466,9 +480,10 @@
* @param data Data bytes.
* @param len Data length.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
- * ble.accumulateAdvertisingPayload(...) should be replaced with
- * ble.gap().accumulateAdvertisingPayload(...).
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::accumulateAdvertisingPayload(GapAdvertisingData::DataType, const uint8_t, uint8_t).
+ * A former call to ble.accumulateAdvertisingPayload(...) should
+ * be replaced with ble.gap().accumulateAdvertisingPayload(...).
*/
ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
return gap().accumulateAdvertisingPayload(type, data, len);
@@ -479,7 +494,8 @@
* underlying stack. It would be uncommon for this API to be used directly;
* there are other APIs to build an advertisement payload (see above).
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::setAdvertisingData(). A former call to
* ble.setAdvertisingData(...) should be replaced with
* ble.gap().setAdvertisingPayload(...).
*/
@@ -491,7 +507,8 @@
* @return Read back advertising data. Useful for storing and
* restoring payload.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::getAdvertisingData(). A former call to
* ble.getAdvertisingData(...) should be replaced with
* ble.gap().getAdvertisingPayload()(...).
*/
@@ -504,7 +521,8 @@
* accumulateAdvertisingPayload(). This automatically propagates the re-
* initialized advertising payload to the underlying stack.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::clearAdvertisingPayload(). A former call to
* ble.clearAdvertisingPayload(...) should be replaced with
* ble.gap().clearAdvertisingPayload(...).
*/
@@ -520,7 +538,8 @@
*
* @return BLE_ERROR_NONE when the advertising payload is set successfully.
*
- * @deprecated You should use the parallel API from Gap directly.
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::setAdvertisingPayload().
*
* @note The new APIs in Gap update the underlying advertisement payload
* implicitly.
@@ -537,7 +556,8 @@
* @param[in] data Data bytes.
* @param[in] len Data length.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::accumulateScanResponse(). A former call to
* ble.accumulateScanResponse(...) should be replaced with
* ble.gap().accumulateScanResponse(...).
*/
@@ -549,7 +569,8 @@
* Reset any scan response prepared from prior calls to
* accumulateScanResponse().
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::clearScanResponse(). A former call to
* ble.clearScanResponse(...) should be replaced with
* ble.gap().clearScanResponse(...).
*/
@@ -560,7 +581,8 @@
/**
* Start advertising.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::startAdvertising(). A former call to
* ble.startAdvertising(...) should be replaced with
* ble.gap().startAdvertising(...).
*/
@@ -571,7 +593,8 @@
/**
* Stop advertising.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::stopAdvertising(). A former call to
* ble.stopAdvertising(...) should be replaced with
* ble.gap().stopAdvertising(...).
*/
@@ -603,7 +626,8 @@
*
* @note The scan interval and window are recommendations to the BLE stack.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::setScanParams(). A former call to
* ble.setScanParams(...) should be replaced with
* ble.gap().setScanParams(...).
*/
@@ -629,7 +653,8 @@
* Once the scanning parameters have been configured, scanning can be
* enabled by using startScan().
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::setScanInterval(). A former call to
* ble.setScanInterval(interval) should be replaced with
* ble.gap().setScanInterval(interval).
*/
@@ -652,7 +677,8 @@
* Once the scanning parameters have been configured, scanning can be
* enabled by using startScan().
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::setScanWindow(). A former call to
* ble.setScanWindow(window) should be replaced with
* ble.gap().setScanWindow(window).
*/
@@ -677,7 +703,8 @@
*
* @note The scan interval and window are recommendations to the BLE stack.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::setScanTimeout(). A former call to
* ble.setScanTimeout(...) should be replaced with
* ble.gap().setScanTimeout(...).
*/
@@ -694,7 +721,8 @@
* Once the scanning parameters have been configured, scanning can be
* enabled by using startScan().
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::setActiveScan(). A former call to
* ble.setActiveScan(...) should be replaced with
* ble.gap().setActiveScanning(...).
*/
@@ -711,7 +739,8 @@
* receiving every advertisement report. This can be passed in
* as NULL, in which case scanning may not be enabled at all.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::startScan(). A former call to
* ble.startScan(callback) should be replaced with
* ble.gap().startScan(callback).
*/
@@ -722,7 +751,8 @@
/**
* Same as above, but this takes an (object, method) pair for a callback.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::startScan(). A former call to
* ble.startScan(callback) should be replaced with
* ble.gap().startScan(object, callback).
*/
@@ -734,7 +764,8 @@
*
* @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::stopScan(). A former call to
* ble.stopScan() should be replaced with
* ble.gap().stopScan().
*/
@@ -756,7 +787,8 @@
* successfully. The onConnection callback (if set) is invoked upon
* a connection event.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::connect(). A former call to
* ble.connect(...) should be replaced with
* ble.gap().connect(...).
*/
@@ -788,15 +820,14 @@
* @param reason
* The reason for disconnection; sent back to the peer.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::disconnect(). A former call to
* ble.disconnect(reason) should be replaced with
* ble.gap().disconnect(reason).
*
* @note This version of disconnect() doesn't take a connection handle. It
* works reliably only for stacks that are limited to a single
* connection.
- *
- * @deprecated You should use the parallel API from Gap directly.
*/
ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
return gap().disconnect(reason);
@@ -806,7 +837,8 @@
* Returns the current Gap state of the device using a bitmask that
* describes whether the device is advertising or connected.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::getState(). A former call to
* ble.getGapState() should be replaced with
* ble.gap().getState().
*/
@@ -826,7 +858,8 @@
* @return BLE_ERROR_NONE if the parameters were successfully filled into
* the given structure pointed to by params.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::getPreferredConnectionParams(). A former call to
* ble.getPreferredConnectionParams() should be replaced with
* ble.gap().getPreferredConnectionParams().
*/
@@ -842,7 +875,8 @@
* @param[in] params
* The structure containing the desired parameters.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::setPreferredConnectionParams(). A former call to
* ble.setPreferredConnectionParams() should be replaced with
* ble.gap().setPreferredConnectionParams().
*/
@@ -860,7 +894,8 @@
* Pointer to desired connection parameters. If NULL is provided on a peripheral role,
* the parameters in the PPCP characteristic of the GAP service will be used instead.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::updateConnectionParams(). A former call to
* ble.updateConnectionParams() should be replaced with
* ble.gap().updateConnectionParams().
*/
@@ -873,7 +908,8 @@
* @param[in] deviceName
* The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::setDeviceName(). A former call to
* ble.setDeviceName() should be replaced with
* ble.gap().setDeviceName().
*/
@@ -899,7 +935,8 @@
* number of bytes actually returned in deviceName. The application may
* use this information to retry with a suitable buffer size.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::getDeviceName(). A former call to
* ble.getDeviceName() should be replaced with
* ble.gap().getDeviceName().
*/
@@ -912,7 +949,8 @@
* @param[in] appearance
* The new value for the device-appearance.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::setAppearance(). A former call to
* ble.setAppearance() should be replaced with
* ble.gap().setAppearance().
*/
@@ -925,7 +963,8 @@
* @param[out] appearanceP
* The new value for the device-appearance.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::getAppearance(). A former call to
* ble.getAppearance() should be replaced with
* ble.gap().getAppearance().
*/
@@ -937,7 +976,8 @@
* Set the radio's transmit power.
* @param[in] txPower Radio transmit power in dBm.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::setTxPower(). A former call to
* ble.setTxPower() should be replaced with
* ble.gap().setTxPower().
*/
@@ -953,7 +993,8 @@
* @param[out] countP
* Out parameter to receive the array's size.
*
- * @deprecated You should use the parallel API from Gap directly. A former call to
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::getPermittedTxPowerValues(). A former call to
* ble.getPermittedTxPowerValues() should be replaced with
* ble.gap().getPermittedTxPowerValues().
*/
@@ -965,7 +1006,8 @@
* Add a service declaration to the local server ATT table. Also add the
* characteristics contained within.
*
- * @deprecated You should use the parallel API from GattServer directly. A former call
+ * @deprecated You should use the parallel API from GattServer directly, refer to
+ * GattServer::addService(). A former call
* to ble.addService() should be replaced with
* ble.gattServer().addService().
*/
@@ -988,7 +1030,8 @@
*
* @return BLE_ERROR_NONE if a value was read successfully into the buffer.
*
- * @deprecated You should use the parallel API from GattServer directly. A former call
+ * @deprecated You should use the parallel API from GattServer directly,
+ * GattServer::read(GattAttribute::Handle_t,uint8_t,uint16_t). A former call
* to ble.readCharacteristicValue() should be replaced with
* ble.gattServer().read().
*/
@@ -1017,8 +1060,9 @@
* parameter to allow fetches for connection-specific multivalued
* attributes (such as the CCCDs).
*
- * @deprecated You should use the parallel API from GattServer directly. A former call
- * to ble.readCharacteristicValue() should be replaced with
+ * @deprecated You should use the parallel API from GattServer directly, refer to
+ * GattServer::read(Gap::Handle_t,GattAttribute::Handle_t,uint8_t,uint16_t).
+ * A former call to ble.readCharacteristicValue() should be replaced with
* ble.gattServer().read().
*/
ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
@@ -1043,8 +1087,9 @@
*
* @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
*
- * @deprecated You should use the parallel API from GattServer directly. A former call
- * to ble.updateCharacteristicValue() should be replaced with
+ * @deprecated You should use the parallel API from GattServer directly, refer to
+ * GattServer::write(GattAttribute::Handle_t,const uint8_t,uint16_t,bool).
+ * A former call to ble.updateCharacteristicValue() should be replaced with
* ble.gattServer().write().
*/
ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
@@ -1076,8 +1121,9 @@
*
* @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
*
- * @deprecated You should use the parallel API from GattServer directly. A former call
- * to ble.updateCharacteristicValue() should be replaced with
+ * @deprecated You should use the parallel API from GattServer directly, refer to
+ * GattServer::write(Gap::Handle_t,GattAttribute::Handle_t,const uint8_t,uint16_t,bool).
+ * A former call to ble.updateCharacteristicValue() should be replaced with
* ble.gattServer().write().
*/
ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
@@ -1103,7 +1149,8 @@
*
* @return BLE_ERROR_NONE on success.
*
- * @deprecated You should use the parallel API from SecurityManager directly. A former
+ * @deprecated You should use the parallel API from SecurityManager directly, refer to
+ * SecurityManager.init(). A former
* call to ble.initializeSecurity(...) should be replaced with
* ble.securityManager().init(...).
*/
@@ -1122,7 +1169,8 @@
*
* @return BLE_SUCCESS or appropriate error code indicating the reason of failure.
*
- * @deprecated You should use the parallel API from SecurityManager directly. A former
+ * @deprecated You should use the parallel API from SecurityManager directly, refer to
+ * SecurityManager::getLinkSecurity(). A former
* call to ble.getLinkSecurity(...) should be replaced with
* ble.securityManager().getLinkSecurity(...).
*/
@@ -1138,7 +1186,8 @@
* @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization or
* application registration.
*
- * @deprecated You should use the parallel API from SecurityManager directly. A former
+ * @deprecated You should use the parallel API from SecurityManager directly, refer to
+ * SecurityManager::purgeAllBondingState(). A former
* call to ble.purgeAllBondingState() should be replaced with
* ble.securityManager().purgeAllBondingState().
*/
@@ -1150,7 +1199,8 @@
* Set up a callback for timeout events. Refer to Gap::TimeoutSource_t for
* possible event types.
*
- * @deprecated You should use the parallel API from Gap directly. A former call
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::onTimeout(). A former call
* to ble.onTimeout(callback) should be replaced with
* ble.gap().onTimeout(callback).
*/
@@ -1161,7 +1211,8 @@
/**
* Set up a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
*
- * @deprecated You should use the parallel API from Gap directly. A former call
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::onConnection(). A former call
* to ble.onConnection(callback) should be replaced with
* ble.gap().onConnection(callback).
*/
@@ -1172,7 +1223,8 @@
/**
* Append to a chain of callbacks to be invoked upon GAP disconnection.
*
- * @deprecated You should use the parallel API from Gap directly. A former call
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::onDisconnection(). A former call
* to ble.onDisconnection(callback) should be replaced with
* ble.gap().onDisconnection(callback).
*/
@@ -1184,7 +1236,8 @@
* The same as onDisconnection(), but allows an object reference and member function
* to be added to the chain of callbacks.
*
- * @deprecated You should use the parallel API from Gap directly. A former call
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::onDisconnection(). A former call
* to ble.onDisconnection(callback) should be replaced with
* ble.gap().onDisconnection(callback).
*/
@@ -1209,7 +1262,8 @@
* The application handler to be invoked in response to a radio
* ACTIVE/INACTIVE event.
*
- * @deprecated You should use the parallel API from Gap directly. A former call
+ * @deprecated You should use the parallel API from Gap directly, refer to
+ * Gap::onRadioNotification(). A former call
* to ble.onRadioNotification(...) should be replaced with
* ble.gap().onRadioNotification(...).
*/
@@ -1228,7 +1282,8 @@
* @note It is also possible to set up a callback into a member function of
* some object.
*
- * @deprecated You should use the parallel API from GattServer directly. A former call
+ * @deprecated You should use the parallel API from GattServer directly, refer to
+ * GattServer::onDataSent(). A former call
* to ble.onDataSent(...) should be replaced with
* ble.gattServer().onDataSent(...).
*/
@@ -1240,7 +1295,8 @@
* The same as onDataSent(), but allows an object reference and member function
* to be added to the chain of callbacks.
*
- * @deprecated You should use the parallel API from GattServer directly. A former call
+ * @deprecated You should use the parallel API from GattServer directly, refer to
+ * GattServer::onDataSent(). A former call
* to ble.onDataSent(...) should be replaced with
* ble.gattServer().onDataSent(...).
*/
@@ -1263,7 +1319,8 @@
* @note It is also possible to set up a callback into a member function of
* some object.
*
- * @deprecated You should use the parallel API from GattServer directly. A former call
+ * @deprecated You should use the parallel API from GattServer directly, refer to
+ * GattServer::onDataWritten(). A former call
* to ble.onDataWritten(...) should be replaced with
* ble.gattServer().onDataWritten(...).
*/
@@ -1275,7 +1332,8 @@
* The same as onDataWritten(), but allows an object reference and member function
* to be added to the chain of callbacks.
*
- * @deprecated You should use the parallel API from GattServer directly. A former call
+ * @deprecated You should use the parallel API from GattServer directly, refer to
+ * GattServer::onDataWritten(). A former call
* to ble.onDataWritten(...) should be replaced with
* ble.gattServer().onDataWritten(...).
*/
@@ -1302,7 +1360,8 @@
* @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
* else BLE_ERROR_NONE.
*
- * @deprecated You should use the parallel API from GattServer directly. A former call
+ * @deprecated You should use the parallel API from GattServer directly, refer to
+ * GattServer::onDataRead(). A former call
* to ble.onDataRead(...) should be replaced with
* ble.gattServer().onDataRead(...).
*/
@@ -1314,7 +1373,8 @@
* The same as onDataRead(), but allows an object reference and member function
* to be added to the chain of callbacks.
*
- * @deprecated You should use the parallel API from GattServer directly. A former call
+ * @deprecated You should use the parallel API from GattServer directly, refer to
+ * GattServer::onDataRead(). A former call
* to ble.onDataRead(...) should be replaced with
* ble.gattServer().onDataRead(...).
*/
@@ -1326,7 +1386,8 @@
* Set up a callback for when notifications or indications are enabled for a
* characteristic on the local GattServer.
*
- * @deprecated You should use the parallel API from GattServer directly. A former call
+ * @deprecated You should use the parallel API from GattServer directly, refer to
+ * GattServer::onUpdatesEnabled(). A former call
* to ble.onUpdatesEnabled(callback) should be replaced with
* ble.gattServer().onUpdatesEnabled(callback).
*/
@@ -1338,7 +1399,8 @@
* Set up a callback for when notifications or indications are disabled for a
* characteristic on the local GattServer.
*
- * @deprecated You should use the parallel API from GattServer directly. A former call
+ * @deprecated You should use the parallel API from GattServer directly, refer to
+ * GattServer::onUpdatesDisabled(). A former call
* to ble.onUpdatesEnabled(callback) should be replaced with
* ble.gattServer().onUpdatesEnabled(callback).
*/
@@ -1350,7 +1412,8 @@
* Set up a callback for when the GATT server receives a response for an
* indication event sent previously.
*
- * @deprecated You should use the parallel API from GattServer directly. A former call
+ * @deprecated You should use the parallel API from GattServer directly, refer to
+ * GattServer::onConfirmationReceived(). A former call
* to ble.onConfirmationReceived(callback) should be replaced with
* ble.gattServer().onConfirmationReceived(callback).
*/
@@ -1365,7 +1428,8 @@
* security request: bool allowBonding, bool requireMITM, and
* SecurityIOCapabilities_t.
*
- * @deprecated You should use the parallel API from SecurityManager directly. A former
+ * @deprecated You should use the parallel API from SecurityManager directly, refer to
+ * SecurityManager::onSecuritySetupInitiated(). A former
* call to ble.onSecuritySetupInitiated(callback) should be replaced with
* ble.securityManager().onSecuritySetupInitiated(callback).
*/
@@ -1379,7 +1443,8 @@
* devices. The callback is passed in the success/failure status of the
* security setup procedure.
*
- * @deprecated You should use the parallel API from SecurityManager directly. A former
+ * @deprecated You should use the parallel API from SecurityManager directly, refer to
+ * SecurityManager::onSecuritySetupCompleted(). A former
* call to ble.onSecuritySetupCompleted(callback) should be replaced with
* ble.securityManager().onSecuritySetupCompleted(callback).
*/
@@ -1395,7 +1460,8 @@
* or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
* to the level of security in effect for the secured link.
*
- * @deprecated You should use the parallel API from SecurityManager directly. A former
+ * @deprecated You should use the parallel API from SecurityManager directly, refer to
+ * SecurityManager::onLinkSecured(). A former
* call to ble.onLinkSecured(callback) should be replaced with
* ble.securityManager().onLinkSecured(callback).
*/
@@ -1407,7 +1473,8 @@
* Set up a callback for successful bonding, meaning that link-specific security
* context is stored persistently for a peer device.
*
- * @deprecated You should use the parallel API from SecurityManager directly. A former
+ * @deprecated You should use the parallel API from SecurityManager directly, refer to
+ * SecurityManager::onSecurityContextStored(). A former
* call to ble.onSecurityContextStored(callback) should be replaced with
* ble.securityManager().onSecurityContextStored(callback).
*/
@@ -1422,7 +1489,8 @@
* a passkey (or PIN) to authenticate the connection
* attempt.
*
- * @deprecated You should use the parallel API from SecurityManager directly. A former
+ * @deprecated You should use the parallel API from SecurityManager directly, refer to
+ * SecurityManager::onPasskeyDisplay(). A former
* call to ble.onPasskeyDisplay(callback) should be replaced with
* ble.securityManager().onPasskeyDisplay(callback).
*/
@@ -1452,4 +1520,4 @@
* sake of compatibility with older
* code. Will be dropped at some point soon.*/
-#endif // ifndef __BLE_H__
\ No newline at end of file
+#endif /* ifndef __BLE_H__ */
\ No newline at end of file