Cristi Stoican
jgh
Fork of
BLE_API
by 
Bluetooth Low Energy
ble/Gap.h
- Committer:
- vcoubard
- Date:
- 2016-04-06
- Revision:
- 1185:a16103dfb50c
- Parent:
- 1183:1589830dbdb7
- Child:
- 1186:61ac7e01586f
File content as of revision 1185:a16103dfb50c:
/* mbed Microcontroller Library
* Copyright (c) 2006-2013 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __GAP_H__
#define __GAP_H__
#include "ble/BLEProtocol.h"
#include "GapAdvertisingData.h"
#include "GapAdvertisingParams.h"
#include "GapScanningParams.h"
#include "GapEvents.h"
#include "CallChainOfFunctionPointersWithContext.h"
#include "FunctionPointerWithContext.h"
#include "deprecate.h"
/* Forward declarations for classes that will only be used for pointers or references in the following. */
class GapAdvertisingParams;
class GapScanningParams;
class GapAdvertisingData;
class Gap {
/*
* DEPRECATION ALERT: all of the APIs in this `public` block are deprecated.
* They have been relocated to the class BLEProtocol.
*/
public:
/**
* Address-type for BLEProtocol addresses.
*
* @deprecated Use BLEProtocol::AddressType_t instead.
*/
typedef BLEProtocol::AddressType_t AddressType_t;
/**
* Address-type for BLEProtocol addresses.
*
* @deprecated Use BLEProtocol::AddressType_t instead.
*/
typedef BLEProtocol::AddressType_t addr_type_t;
/**
* Address-type for BLEProtocol addresses.
*
* @deprecated Use BLEProtocol::AddressType_t instead. The following
* constants have been left in their deprecated state to
* transparenly support existing applications which may have
* used Gap::ADDR_TYPE_*.
*/
enum DeprecatedAddressType_t {
ADDR_TYPE_PUBLIC = BLEProtocol::AddressType::PUBLIC,
ADDR_TYPE_RANDOM_STATIC = BLEProtocol::AddressType::RANDOM_STATIC,
ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE = BLEProtocol::AddressType::RANDOM_PRIVATE_RESOLVABLE,
ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE = BLEProtocol::AddressType::RANDOM_PRIVATE_NON_RESOLVABLE
};
/**
* Length (in octets) of the BLE MAC address.
*/
static const unsigned ADDR_LEN = BLEProtocol::ADDR_LEN;
/**
* 48-bit address, LSB format.
*
* @deprecated Use BLEProtocol::AddressBytes_t instead.
*/
typedef BLEProtocol::AddressBytes_t Address_t;
/**
* 48-bit address, LSB format.
*
* @deprecated Use BLEProtocol::AddressBytes_t instead.
*/
typedef BLEProtocol::AddressBytes_t address_t;
public:
/**
* Enumeration for timeout sources.
*/
enum TimeoutSource_t {
TIMEOUT_SRC_ADVERTISING = 0x00, /**< Advertising timeout. */
TIMEOUT_SRC_SECURITY_REQUEST = 0x01, /**< Security request timeout. */
TIMEOUT_SRC_SCAN = 0x02, /**< Scanning timeout. */
TIMEOUT_SRC_CONN = 0x03, /**< Connection timeout. */
};
/**
* Enumeration for disconnection reasons. The values for these reasons are
* derived from Nordic's implementation, but the reasons are meant to be
* independent of the transport. If you are returned a reason that is not
* covered by this enumeration, please refer to the underlying
* transport library.
*/
enum DisconnectionReason_t {
CONNECTION_TIMEOUT = 0x08,
REMOTE_USER_TERMINATED_CONNECTION = 0x13,
REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES = 0x14, /**< Remote device terminated connection due to low resources.*/
REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF = 0x15, /**< Remote device terminated connection due to power off. */
LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
CONN_INTERVAL_UNACCEPTABLE = 0x3B,
};
/**
* Enumeration for whitelist advertising policy filter modes. The possible
* filter modes were obtained from the Bluetooth Core Specification
* 4.2 (Vol. 6), Part B, Section 4.3.2.
*
* @experimental
*/
enum AdvertisingPolicyMode_t {
ADV_POLICY_IGNORE_WHITELIST = 0,
ADV_POLICY_FILTER_SCAN_REQS = 1,
ADV_POLICY_FILTER_CONN_REQS = 2,
ADV_POLICY_FILTER_ALL_REQS = 3,
};
/**
* Enumeration for whitelist scanning policy filter modes. The possible
* filter modes were obtained from the Bluetooth Core Specification
* 4.2 (Vol. 6), Part B, Section 4.3.3.
*
* @experimental
*/
enum ScanningPolicyMode_t {
SCAN_POLICY_IGNORE_WHITELIST = 0,
SCAN_POLICY_FILTER_ALL_ADV = 1,
};
/**
* Enumeration for the whitelist initiator policy fiter modes. The possible
* filter modes were obtained from the Bluetooth Core Specification
* 4.2 (vol. 6), Part B, Section 4.4.4.
*
* @experimental
*/
enum InitiatorPolicyMode_t {
INIT_POLICY_IGNORE_WHITELIST = 0,
INIT_POLICY_FILTER_ALL_ADV = 1,
};
/**
* Representation of a Bluetooth Low Enery Whitelist containing addresses.
*
* @experimental
*/
struct Whitelist_t {
BLEProtocol::Address_t *addresses; /**< List of BLE addresses in the whitelist. */
uint8_t size; /**< Total number of BLE addresses in this whitelist */
uint8_t capacity; /**< Maximum number of BLE addresses that can be added to this whitelist. */
};
/**
* Describes the current state of the device (more than one bit can be set).
*/
struct GapState_t {
unsigned advertising : 1; /**< Peripheral is currently advertising. */
unsigned connected : 1; /**< Peripheral is connected to a central. */
};
/**
* Type for connection handle.
*/
typedef uint16_t Handle_t;
/**
* Structure containing GAP connection parameters. When in peripheral role
* the connection parameters are suggestions. The choice of the connection
* parameters is eventually up to the central.
*/
typedef struct {
uint16_t minConnectionInterval; /**< Minimum Connection Interval in 1.25 ms units, see BLE_GAP_CP_LIMITS.*/
uint16_t maxConnectionInterval; /**< Maximum Connection Interval in 1.25 ms units, see BLE_GAP_CP_LIMITS.*/
uint16_t slaveLatency; /**< Slave Latency in number of connection events, see BLE_GAP_CP_LIMITS.*/
uint16_t connectionSupervisionTimeout; /**< Connection Supervision Timeout in 10 ms units, see BLE_GAP_CP_LIMITS.*/
} ConnectionParams_t;
/**
* Enumeration for the possible GAP roles of a BLE device.
*/
enum Role_t {
PERIPHERAL = 0x1, /**< Peripheral Role. */
CENTRAL = 0x2, /**< Central Role. */
};
/**
* Structure containing data and metadata of a scanned advertising packet.
*/
struct AdvertisementCallbackParams_t {
BLEProtocol::AddressBytes_t peerAddr; /**< The peer's BLE address. */
int8_t rssi; /**< The advertisement packet RSSI value. */
bool isScanResponse; /**< Whether this packet is the response to a scan request. */
GapAdvertisingParams::AdvertisingType_t type; /**< The type of advertisement. */
uint8_t advertisingDataLen; /**< Length of the advertisement data. */
const uint8_t *advertisingData; /**< Pointer to the advertisement packet's data. */
};
/**
* Type for the handlers of advertisement callback events. Refer to
* Gap::startScan().
*/
typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
/**
* Encapsulates the parameters of a connection. This information is passed
* to the registered handler of connection events. Refer to Gap::onConnection().
*/
struct ConnectionCallbackParams_t {
Handle_t handle; /**< The ID for this connection */
Role_t role; /**< This device's role in the connection */
BLEProtocol::AddressType_t peerAddrType; /**< The peer's BLE address type */
BLEProtocol::AddressBytes_t peerAddr; /**< The peer's BLE address */
BLEProtocol::AddressType_t ownAddrType; /**< This device's BLE address type */
BLEProtocol::AddressBytes_t ownAddr; /**< This devices's BLE address */
const ConnectionParams_t *connectionParams; /**< The currently configured connection parameters */
/**
* Constructor for ConnectionCallbackParams_t.
*
* @param[in] handleIn
* Value for ConnectionCallbackParams_t::handle
* @param[in] roleIn
* Value for ConnectionCallbackParams_t::role
* @param[in] peerAddrTypeIn
* Value for ConnectionCallbackParams_t::peerAddrType
* @param[in] peerAddrIn
* Value for ConnectionCallbackParams_t::peerAddr
* @param[in] ownAddrTypeIn
* Value for ConnectionCallbackParams_t::ownAddrType
* @param[in] ownAddrIn
* Value for ConnectionCallbackParams_t::ownAddr
* @param[in] connectionParamsIn
* Value for ConnectionCallbackParams_t::connectionParams
*/
ConnectionCallbackParams_t(Handle_t handleIn,
Role_t roleIn,
BLEProtocol::AddressType_t peerAddrTypeIn,
const uint8_t *peerAddrIn,
BLEProtocol::AddressType_t ownAddrTypeIn,
const uint8_t *ownAddrIn,
const ConnectionParams_t *connectionParamsIn) :
handle(handleIn),
role(roleIn),
peerAddrType(peerAddrTypeIn),
peerAddr(),
ownAddrType(ownAddrTypeIn),
ownAddr(),
connectionParams(connectionParamsIn) {
memcpy(peerAddr, peerAddrIn, ADDR_LEN);
memcpy(ownAddr, ownAddrIn, ADDR_LEN);
}
};
/**
* Structure that encapsulates information about a disconnection event.
* Refer to Gap::onDisconnection().
*/
struct DisconnectionCallbackParams_t {
Handle_t handle; /**< The ID of the connection that caused the disconnection event */
DisconnectionReason_t reason; /**< The reason of the disconnection event */
/**
* Constructor for DisconnectionCallbackParams_t.
*
* @param[in] handleIn
* Value for DisconnectionCallbackParams_t::handle.
* @param[in] reasonIn
* Value for DisconnectionCallbackParams_t::reason.
*/
DisconnectionCallbackParams_t(Handle_t handleIn,
DisconnectionReason_t reasonIn) :
handle(handleIn),
reason(reasonIn)
{}
};
static const uint16_t UNIT_1_25_MS = 1250; /**< Number of microseconds in 1.25 milliseconds. */
/**
* Helper function to convert from units of milliseconds to GAP duration
* units.
*
* @param[in] durationInMillis
* The duration in milliseconds.
*
* @return The duration in GAP duration units.
*/
static uint16_t MSEC_TO_GAP_DURATION_UNITS(uint32_t durationInMillis) {
return (durationInMillis * 1000) / UNIT_1_25_MS;
}
/**
* Type for the registered callbacks added to the timeout event callchain.
* Refer to Gap::onTimeout().
*/
typedef FunctionPointerWithContext<TimeoutSource_t> TimeoutEventCallback_t;
/**
* Type for the timeout event callchain. Refer to Gap::onTimeout().
*/
typedef CallChainOfFunctionPointersWithContext<TimeoutSource_t> TimeoutEventCallbackChain_t;
/**
* Type for the registered callbacks added to the connection event
* callchain. Refer to Gap::onConnection().
*/
typedef FunctionPointerWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallback_t;
/**
* Type for the connection event callchain. Refer to Gap::onConnection().
*/
typedef CallChainOfFunctionPointersWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallbackChain_t;
/**
* Type for the registered callbacks added to the disconnection event
* callchain. Refer to Gap::onDisconnetion().
*/
typedef FunctionPointerWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallback_t;
/**
* Type for the disconnection event callchain. Refer to Gap::onDisconnection().
*/
typedef CallChainOfFunctionPointersWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallbackChain_t;
/**
* Type for the handlers of radio notification callback events. Refer to
* Gap::onRadioNotification().
*/
typedef FunctionPointerWithContext<bool> RadioNotificationEventCallback_t;
/**
* Type for the handlers of shutdown callback events. Refer to
* Gap::onShutdown().
*/
typedef FunctionPointerWithContext<const Gap *> GapShutdownCallback_t;
/**
* Type for the shutdown event callchain. Refer to Gap::onShutdown().
*/
typedef CallChainOfFunctionPointersWithContext<const Gap *> GapShutdownCallbackChain_t;
/*
* The following functions are meant to be overridden in the platform-specific sub-class.
*/
public:
/**
* Set the BTLE MAC address and type. Please note that the address format is
* least significant byte first (LSB). Please refer to BLEProtocol::AddressBytes_t.
*
* @param[in] type
* The type of the BLE address to set.
* @param[in] address
* The BLE address to set.
*
* @return BLE_ERROR_NONE on success.
*/
virtual ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::AddressBytes_t address) {
/* avoid compiler warnings about unused variables */
(void)type;
(void)address;
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* Fetch the BTLE MAC address and type.
*
* @param[out] typeP
* The current BLE address type.
* @param[out] address
* The current BLE address.
*
* @return BLE_ERROR_NONE on success.
*/
virtual ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::AddressBytes_t address) {
/* Avoid compiler warnings about unused variables. */
(void)typeP;
(void)address;
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* Get the minimum advertising interval in milliseconds for connectable
* undirected and connectable directed event types supported by the
* underlying BLE stack.
*
* @return Minimum Advertising interval in milliseconds for connectable
* undirected and connectable directed event types.
*/
virtual uint16_t getMinAdvertisingInterval(void) const {
return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* Get the minimum advertising interval in milliseconds for scannable
* undirected and non-connectable undirected even types supported by the
* underlying BLE stack.
*
* @return Minimum Advertising interval in milliseconds for scannable
* undirected and non-connectable undirected event types.
*/
virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const {
return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* Get the maximum advertising interval in milliseconds for all event types
* supported by the underlying BLE stack.
*
* @return Maximum Advertising interval in milliseconds.
*/
virtual uint16_t getMaxAdvertisingInterval(void) const {
return 0xFFFF; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* Stop advertising. The current advertising parameters remain in effect.
*
* @retval BLE_ERROR_NONE if successfully stopped advertising procedure.
*/
virtual ble_error_t stopAdvertising(void) {
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* Stop scanning. The current scanning parameters remain in effect.
*
* @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
*/
virtual ble_error_t stopScan() {
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* Create a connection (GAP Link Establishment).
*
* @param[in] peerAddr
* 48-bit address, LSB format.
* @param[in] peerAddrType
* Address type of the peer.
* @param[in] connectionParams
* Connection parameters.
* @param[in] scanParams
* Paramters to be used while scanning for the peer.
*
* @return BLE_ERROR_NONE if connection establishment procedure is started
* successfully. The connectionCallChain (if set) will be invoked upon
* a connection event.
*/
virtual ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
BLEProtocol::AddressType_t peerAddrType,
const ConnectionParams_t *connectionParams,
const GapScanningParams *scanParams) {
/* Avoid compiler warnings about unused variables. */
(void)peerAddr;
(void)peerAddrType;
(void)connectionParams;
(void)scanParams;
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* Create a connection (GAP Link Establishment).
*
* @deprecated This funtion overloads Gap::connect(const BLEProtocol::Address_t peerAddr,
* BLEProtocol::AddressType_t peerAddrType,
* const ConnectionParams_t *connectionParams,
* const GapScanningParams *scanParams)
* to maintain backward compatibility for change from Gap::AddressType_t to
* BLEProtocol::AddressType_t.
*/
ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
DeprecatedAddressType_t peerAddrType,
const ConnectionParams_t *connectionParams,
const GapScanningParams *scanParams)
__deprecated_message("Gap::DeprecatedAddressType_t is deprecated, use BLEProtocol::AddressType_t instead") {
return connect(peerAddr, (BLEProtocol::AddressType_t) peerAddrType, connectionParams, scanParams);
}
/**
* This call initiates the disconnection procedure, and its completion will
* be communicated to the application with an invocation of the
* disconnectionCallback.
*
* @param[in] reason
* The reason for disconnection; to be sent back to the peer.
* @param[in] connectionHandle
* The handle of the connection to disconnect from.
*
* @return BLE_ERROR_NONE if disconnection was successful.
*/
virtual ble_error_t disconnect(Handle_t connectionHandle, DisconnectionReason_t reason) {
/* avoid compiler warnings about unused variables */
(void)connectionHandle;
(void)reason;
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* This call initiates the disconnection procedure, and its completion will
* be communicated to the application with an invocation of the
* disconnectionCallback.
*
* @param[in] reason
* The reason for disconnection; to be sent back to the peer.
*
* @return BLE_ERROR_NONE if disconnection was successful.
*
* @deprecated This version of disconnect() doesn't take a connection handle. It
* works reliably only for stacks that are limited to a single
* connection. Use instead Gap::disconnect(Handle_t connectionHandle,
* DisconnectionReason_t reason) instead.
*/
virtual ble_error_t disconnect(DisconnectionReason_t reason) {
/* Avoid compiler warnings about unused variables. */
(void)reason;
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* Get the GAP peripheral preferred connection parameters. These are the
* defaults that the peripheral would like to have in a connection. The
* choice of the connection parameters is eventually up to the central.
*
* @param[out] params
* The structure where the parameters will be stored. Memory
* for this is owned by the caller.
*
* @return BLE_ERROR_NONE if the parameters were successfully filled into
* the given structure pointed to by params.
*/
virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) {
/* Avoid compiler warnings about unused variables. */
(void)params;
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* Set the GAP peripheral preferred connection parameters. These are the
* defaults that the peripheral would like to have in a connection. The
* choice of the connection parameters is eventually up to the central.
*
* @param[in] params
* The structure containing the desired parameters.
*
* @return BLE_ERROR_NONE if the preferred connection params were set
* correctly.
*/
virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) {
/* Avoid compiler warnings about unused variables. */
(void)params;
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* Update connection parameters. In the central role this will initiate a
* Link Layer connection parameter update procedure. In the peripheral role,
* this will send the corresponding L2CAP request and wait for the central
* to perform the procedure.
*
* @param[in] handle
* Connection Handle.
* @param[in] params
* Pointer to desired connection parameters. If NULL is provided on a peripheral role,
* the parameters in the PPCP characteristic of the GAP service will be used instead.
*
* @return BLE_ERROR_NONE if the connection parameters were updated correctly.
*/
virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) {
/* avoid compiler warnings about unused variables */
(void)handle;
(void)params;
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* Set the device name characteristic in the GAP service.
*
* @param[in] deviceName
* The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
*
* @return BLE_ERROR_NONE if the device name was set correctly.
*/
virtual ble_error_t setDeviceName(const uint8_t *deviceName) {
/* Avoid compiler warnings about unused variables. */
(void)deviceName;
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* Get the value of the device name characteristic in the GAP service.
*
* @param[out] deviceName
* Pointer to an empty buffer where the UTF-8 *non NULL-
* terminated* string will be placed. Set this
* value to NULL in order to obtain the deviceName-length
* from the 'length' parameter.
*
* @param[in,out] lengthP
* (on input) Length of the buffer pointed to by deviceName;
* (on output) the complete device name length (without the
* null terminator).
*
* @return BLE_ERROR_NONE if the device name was fetched correctly from the
* underlying BLE stack.
*
* @note If the device name is longer than the size of the supplied buffer,
* length will return the complete device name length, and not the
* number of bytes actually returned in deviceName. The application may
* use this information to retry with a suitable buffer size.
*/
virtual ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
/* avoid compiler warnings about unused variables */
(void)deviceName;
(void)lengthP;
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* Set the appearance characteristic in the GAP service.
*
* @param[in] appearance
* The new value for the device-appearance.
*
* @return BLE_ERROR_NONE if the new appearance was set correctly.
*/
virtual ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
/* Avoid compiler warnings about unused variables. */
(void)appearance;
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* Get the appearance characteristic in the GAP service.
*
* @param[out] appearance
* The current device-appearance value.
*
* @return BLE_ERROR_NONE if the device-appearance was fetched correctly
* from the underlying BLE stack.
*/
virtual ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
/* Avoid compiler warnings about unused variables. */
(void)appearanceP;
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* Set the radio's transmit power.
*
* @param[in] txPower
* Radio's transmit power in dBm.
*
* @return BLE_ERROR_NONE if the new radio's transmit power was set
* correctly.
*/
virtual ble_error_t setTxPower(int8_t txPower) {
/* Avoid compiler warnings about unused variables. */
(void)txPower;
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* Query the underlying stack for permitted arguments for setTxPower().
*
* @param[out] valueArrayPP
* Out parameter to receive the immutable array of Tx values.
* @param[out] countP
* Out parameter to receive the array's size.
*/
virtual void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
/* Avoid compiler warnings about unused variables. */
(void)valueArrayPP;
(void)countP;
*countP = 0; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
* Get the maximum size of the whitelist.
*
* @return Maximum size of the whitelist.
*
* @note If using mbed OS the size of the whitelist can be configured by
* setting the YOTTA_CFG_WHITELIST_MAX_SIZE macro in your yotta
* config file.
*
* @experimental
*/
virtual uint8_t getMaxWhitelistSize(void) const
{
return 0;
}
/**
* Get the internal whitelist to be used by the Link Layer when scanning,
* advertising or initiating a connection depending on the filter policies.
*
* @param[in,out] whitelist
* (on input) whitelist.capacity contains the maximum number
* of addresses to be returned.
* (on output) The populated whitelist with copies of the
* addresses in the implementation's whitelist.
*
* @return BLE_ERROR_NONE if the implementation's whitelist was successfully
* copied into the supplied reference.
*
* @experimental
*/
virtual ble_error_t getWhitelist(Whitelist_t &whitelist) const
{
(void) whitelist;
return BLE_ERROR_NOT_IMPLEMENTED;
}
/**
* Set the internal whitelist to be used by the Link Layer when scanning,
* advertising or initiating a connection depending on the filter policies.
*
* @param[in] whitelist
* A reference to a whitelist containing the addresses to
* be added to the internal whitelist.
*
* @return BLE_ERROR_NONE if the implementation's whitelist was successfully
* populated with the addresses in the given whitelist.
*
* @note The whitelist must not contain addresses of type @ref
* BLEProtocol::AddressType_t::RANDOM_PRIVATE_NON_RESOLVABLE, this
* this will result in a @ref BLE_ERROR_INVALID_PARAM since the
* remote peer might change its private address at any time and it
* is not possible to resolve it.
* @note If the input whitelist is larger than @ref getMaxWhitelistSize()
* the @ref BLE_ERROR_PARAM_OUT_OF_RANGE is returned.
*
* @experimental
*/
virtual ble_error_t setWhitelist(const Whitelist_t &whitelist)
{
(void) whitelist;
return BLE_ERROR_NOT_IMPLEMENTED;
}
/**
* Set the advertising policy filter mode to be used in the next call
* to startAdvertising().
*
* @param[in] mode
* The new advertising policy filter mode.
*
* @return BLE_ERROR_NONE if the specified policy filter mode was set
* successfully.
*
* @experimental
*/
virtual ble_error_t setAdvertisingPolicyMode(AdvertisingPolicyMode_t mode)
{
(void) mode;
return BLE_ERROR_NOT_IMPLEMENTED;
}
/**
* Set the scan policy filter mode to be used in the next call
* to startScan().
*
* @param[in] mode
* The new scan policy filter mode.
*
* @return BLE_ERROR_NONE if the specified policy filter mode was set
* successfully.
*
* @experimental
*/
virtual ble_error_t setScanningPolicyMode(ScanningPolicyMode_t mode)
{
(void) mode;
return BLE_ERROR_NOT_IMPLEMENTED;
}
/**
* Set the initiator policy filter mode to be used.
*
* @param[in] mode
* The new initiator policy filter mode.
*
* @return BLE_ERROR_NONE if the specified policy filter mode was set
* successfully.
*
* @experimental
*/
virtual ble_error_t setInitiatorPolicyMode(InitiatorPolicyMode_t mode)
{
(void) mode;
return BLE_ERROR_NOT_IMPLEMENTED;
}
/**
* Get the advertising policy filter mode that will be used in the next
* call to startAdvertising().
*
* @return The set advertising policy filter mode.
*
* @experimental
*/
virtual AdvertisingPolicyMode_t getAdvertisingPolicyMode(void) const
{
return ADV_POLICY_IGNORE_WHITELIST;
}
/**
* Get the scan policy filter mode that will be used in the next
* call to startScan().
*
* @return The set scan policy filter mode.
*
* @experimental
*/
virtual ScanningPolicyMode_t getScanningPolicyMode(void) const
{
return SCAN_POLICY_IGNORE_WHITELIST;
}
/**
* Get the initiator policy filter mode that will be used.
*
* @return The set scan policy filter mode.
*
* @experimental
*/
virtual InitiatorPolicyMode_t getInitiatorPolicyMode(void) const
{
return INIT_POLICY_IGNORE_WHITELIST;
}
protected:
/* Override the following in the underlying adaptation layer to provide the functionality of scanning. */
/**
* Start scanning procedure in the underlying BLE stack.
*
* @param[in] scanningParams
* The GAP scanning parameters.
*
* @return BLE_ERROR_NONE if the scan procedure started successfully.
*/
virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) {
(void)scanningParams;
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/*
* APIs with non-virtual implementations.
*/
public:
/**
* Get the current GAP state of the device using a bitmask that
* describes whether the device is advertising or connected.
*
* @return The current GAP state of the device.
*/
GapState_t getState(void) const {
return state;
}
/**
* Set the GAP advertising mode to use for this device.
*
* @param[in] advType
* The new type of the advertising packets.
*/
void setAdvertisingType(GapAdvertisingParams::AdvertisingType_t advType) {
_advParams.setAdvertisingType(advType);
}
/**
* Set the advertising interval.
*
* @param[in] interval
* Advertising interval in units of milliseconds. Advertising
* is disabled if interval is 0. If interval is smaller than
* the minimum supported value, then the minimum supported
* value is used instead. This minimum value can be discovered
* using getMinAdvertisingInterval().
*
* This field must be set to 0 if connectionMode is equal
* to ADV_CONNECTABLE_DIRECTED.
*
* @note Decreasing this value will allow central devices to detect a
* peripheral faster, at the expense of more power being used by the radio
* due to the higher data transmit rate.
*
* @note [WARNING] This API previously used 0.625ms as the unit for its
* @p interval argument. That required an explicit conversion from
* milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
* no longer required as the new units are milliseconds. Any application
* code depending on the old semantics needs to be updated accordingly.
*/
void setAdvertisingInterval(uint16_t interval) {
if (interval == 0) {
stopAdvertising();
} else if (interval < getMinAdvertisingInterval()) {
interval = getMinAdvertisingInterval();
}
_advParams.setInterval(interval);
}
/**
* Set the advertising timeout. The length of time to advertise for before
* a timeout event is generated.
*
* @param[in] timeout
* Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
* and 16383). Use 0 to disable the advertising timeout.
*/
void setAdvertisingTimeout(uint16_t timeout) {
_advParams.setTimeout(timeout);
}
/**
* Start advertising.
*
* @return BLE_ERROR_NONE if the device started advertising successfully.
*/
ble_error_t startAdvertising(void) {
ble_error_t rc;
setAdvertisingData(); /* Update the underlying stack. */
if ((rc = startAdvertising(_advParams)) == BLE_ERROR_NONE) {
state.advertising = 1;
}
return rc;
}
/**
* Reset any advertising payload prepared from prior calls to
* accumulateAdvertisingPayload(). This automatically propagates the re-
* initialized advertising payload to the underlying stack.
*/
void clearAdvertisingPayload(void) {
_advPayload.clear();
setAdvertisingData();
}
/**
* Accumulate an AD structure in the advertising payload. Please note that
* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
* as an additional 31 bytes if the advertising payload is too
* small.
*
* @param[in] flags
* The flags to be added. Please refer to
* GapAdvertisingData::Flags for valid flags. Multiple
* flags may be specified in combination.
*
* @return BLE_ERROR_NONE if the data was successfully added to the
* advertising payload.
*/
ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
ble_error_t rc;
if ((rc = _advPayload.addFlags(flags)) != BLE_ERROR_NONE) {
return rc;
}
return setAdvertisingData();
}
/**
* Accumulate an AD structure in the advertising payload. Please note that
* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
* as an additional 31 bytes if the advertising payload is too
* small.
*
* @param[in] app
* The appearance of the peripheral.
*
* @return BLE_ERROR_NONE if the data was successfully added to the
* advertising payload.
*/
ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
setAppearance(app);
ble_error_t rc;
if ((rc = _advPayload.addAppearance(app)) != BLE_ERROR_NONE) {
return rc;
}
return setAdvertisingData();
}
/**
* Accumulate an AD structure in the advertising payload. Please note that
* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
* as an additional 31 bytes if the advertising payload is too
* small.
*
* @param[in] power
* The max transmit power to be used by the controller (in dBm).
*
* @return BLE_ERROR_NONE if the data was successfully added to the
* advertising payload.
*/
ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
ble_error_t rc;
if ((rc = _advPayload.addTxPower(power)) != BLE_ERROR_NONE) {
return rc;
}
return setAdvertisingData();
}
/**
* Accumulate a variable length byte-stream as an AD structure in the
* advertising payload. Please note that the payload is limited to 31 bytes.
* The SCAN_RESPONSE message may be used as an additional 31 bytes if the
* advertising payload is too small.
*
* @param[in] type
* The type describing the variable length data.
* @param[in] data
* Data bytes.
* @param[in] len
* Length of data.
*
* @return BLE_ERROR_NONE if the advertisement payload was updated based on
* matching AD type; otherwise, an appropriate error.
*
* @note When the specified AD type is INCOMPLETE_LIST_16BIT_SERVICE_IDS,
* COMPLETE_LIST_16BIT_SERVICE_IDS, INCOMPLETE_LIST_32BIT_SERVICE_IDS,
* COMPLETE_LIST_32BIT_SERVICE_IDS, INCOMPLETE_LIST_128BIT_SERVICE_IDS,
* COMPLETE_LIST_128BIT_SERVICE_IDS or LIST_128BIT_SOLICITATION_IDS the
* supplied value is appended to the values previously added to the
* payload.
*/
ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
setDeviceName(data);
}
ble_error_t rc;
if ((rc = _advPayload.addData(type, data, len)) != BLE_ERROR_NONE) {
return rc;
}
return setAdvertisingData();
}
/**
* Update a particular ADV field in the advertising payload (based on
* matching type).
*
* @param[in] type
* The ADV type field describing the variable length data.
* @param[in] data
* Data bytes.
* @param[in] len
* Length of data.
*
* @note If advertisements are enabled, then the update will take effect immediately.
*
* @return BLE_ERROR_NONE if the advertisement payload was updated based on
* matching AD type; otherwise, an appropriate error.
*/
ble_error_t updateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
setDeviceName(data);
}
ble_error_t rc;
if ((rc = _advPayload.updateData(type, data, len)) != BLE_ERROR_NONE) {
return rc;
}
return setAdvertisingData();
}
/**
* Set up a particular, user-constructed advertisement payload for the
* underlying stack. It would be uncommon for this API to be used directly;
* there are other APIs to build an advertisement payload (refer to
* Gap::accumulateAdvertisingPayload()).
*
* @param[in] payload
* A reference to a user constructed advertisement
* payload.
*
* @return BLE_ERROR_NONE if the advertisement payload was successfully
* set.
*/
ble_error_t setAdvertisingPayload(const GapAdvertisingData &payload) {
_advPayload = payload;
return setAdvertisingData();
}
/**
* Get a reference to the advertising payload.
*
* @return Read back advertising data.
*
* @note Useful for storing and restoring payload.
*/
const GapAdvertisingData &getAdvertisingPayload(void) const {
return _advPayload;
}
/**
* Accumulate a variable length byte-stream as an AD structure in the
* scanResponse payload.
*
* @param[in] type
* The type describing the variable length data.
* @param[in] data
* Data bytes.
* @param[in] len
* Length of data.
*
* @return BLE_ERROR_NONE if the data was successfully added to the scan
* response payload.
*/
ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
ble_error_t rc;
if ((rc = _scanResponse.addData(type, data, len)) != BLE_ERROR_NONE) {
return rc;
}
return setAdvertisingData();
}
/**
* Reset any scan response prepared from prior calls to
* Gap::accumulateScanResponse().
*
* @note This should be followed by a call to Gap::setAdvertisingPayload() or
* Gap::startAdvertising() before the update takes effect.
*/
void clearScanResponse(void) {
_scanResponse.clear();
setAdvertisingData();
}
/**
* Set up parameters for GAP scanning (observer mode).
*
* @param[in] interval
* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
* @param[in] window
* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
* @param[in] timeout
* Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
* @param[in] activeScanning
* Set to True if active-scanning is required. This is used to fetch the
* scan response from a peer if possible.
*
* @return BLE_ERROR_NONE if the scan parameters were correctly set.
*
* @note The scanning window divided by the interval determines the duty cycle for
* scanning. For example, if the interval is 100ms and the window is 10ms,
* then the controller will scan for 10 percent of the time. It is possible
* to have the interval and window set to the same value. In this case,
* scanning is continuous, with a change of scanning frequency once every
* interval.
*
* @note Once the scanning parameters have been configured, scanning can be
* enabled by using startScan().
*
* @note The scan interval and window are recommendations to the BLE stack.
*/
ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
uint16_t timeout = 0,
bool activeScanning = false) {
ble_error_t rc;
if (((rc = _scanningParams.setInterval(interval)) == BLE_ERROR_NONE) &&
((rc = _scanningParams.setWindow(window)) == BLE_ERROR_NONE) &&
((rc = _scanningParams.setTimeout(timeout)) == BLE_ERROR_NONE)) {
_scanningParams.setActiveScanning(activeScanning);
return BLE_ERROR_NONE;
}
return rc;
}
/**
* Set up the scanInterval parameter for GAP scanning (observer mode).
*
* @param[in] interval
* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
*
* @return BLE_ERROR_NONE if the scan interval was correctly set.
*
* @note The scanning window divided by the interval determines the duty cycle for
* scanning. For example, if the interval is 100ms and the window is 10ms,
* then the controller will scan for 10 percent of the time. It is possible
* to have the interval and window set to the same value. In this case,
* scanning is continuous, with a change of scanning frequency once every
* interval.
*
* @note Once the scanning parameters have been configured, scanning can be
* enabled by using startScan().
*/
ble_error_t setScanInterval(uint16_t interval) {
return _scanningParams.setInterval(interval);
}
/**
* Set up the scanWindow parameter for GAP scanning (observer mode).
*
* @param[in] window
* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
*
* @return BLE_ERROR_NONE if the scan window was correctly set.
*
* @note The scanning window divided by the interval determines the duty cycle for
* scanning. For example, if the interval is 100ms and the window is 10ms,
* then the controller will scan for 10 percent of the time. It is possible
* to have the interval and window set to the same value. In this case,
* scanning is continuous, with a change of scanning frequency once every
* interval.
*
* @note Once the scanning parameters have been configured, scanning can be
* enabled by using startScan().
*
* @note If scanning is already active, the updated value of scanWindow will be
* propagated to the underlying BLE stack.
*/
ble_error_t setScanWindow(uint16_t window) {
ble_error_t rc;
if ((rc = _scanningParams.setWindow(window)) != BLE_ERROR_NONE) {
return rc;
}
/* If scanning is already active, propagate the new setting to the stack. */
if (scanningActive) {
return startRadioScan(_scanningParams);
}
return BLE_ERROR_NONE;
}
/**
* Set up parameters for GAP scanning (observer mode).
*
* @param[in] timeout
* Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
*
* @return BLE_ERROR_NONE if the scan timeout was correctly set.
*
* @note Once the scanning parameters have been configured, scanning can be
* enabled by using startScan().
*
* @note If scanning is already active, the updated value of scanTimeout will be
* propagated to the underlying BLE stack.
*/
ble_error_t setScanTimeout(uint16_t timeout) {
ble_error_t rc;
if ((rc = _scanningParams.setTimeout(timeout)) != BLE_ERROR_NONE) {
return rc;
}
/* If scanning is already active, propagate the new settings to the stack. */
if (scanningActive) {
return startRadioScan(_scanningParams);
}
return BLE_ERROR_NONE;
}
/**
* Modify the active scanning parameter for GAP scanning (observer mode).
* This is used to fetch the scan response from a peer if possible.
*
* @param[in] activeScanning
* Set to True if active-scanning is required.
*
* @return BLE_ERROR_NONE if active scanning was successfully set.
*
* @note Once the scanning parameters have been configured, scanning can be
* enabled by using startScan().
*
* @note If scanning is already in progress, then active-scanning will be enabled
* for the underlying BLE stack.
*/
ble_error_t setActiveScanning(bool activeScanning) {
_scanningParams.setActiveScanning(activeScanning);
/* If scanning is already active, propagate the new settings to the stack. */
if (scanningActive) {
return startRadioScan(_scanningParams);
}
return BLE_ERROR_NONE;
}
/**
* Start scanning (Observer Procedure) based on the parameters currently in
* effect.
*
* @param[in] callback
* The application-specific callback to be invoked upon
* receiving every advertisement report. This can be passed in
* as NULL, in which case scanning may not be enabled at all.
*
* @return BLE_ERROR_NONE if the device successfully started the scan
* procedure.
*/
ble_error_t startScan(void (*callback)(const AdvertisementCallbackParams_t *params)) {
ble_error_t err = BLE_ERROR_NONE;
if (callback) {
if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
scanningActive = true;
onAdvertisementReport.attach(callback);
}
}
return err;
}
/**
* Same as Gap::startScan(), but allows the possibility to add an object
* reference and member function as handler for advertisement event
* callbacks.
*
* @param[in] object
* Pointer to the object of a class defining the member callback
* function (@p callbackMember).
* @param[in] callbackMember
* The member callback (within the context of an object) to be
* invoked.
*
* @return BLE_ERROR_NONE if the device successfully started the scan
* procedure.
*/
template<typename T>
ble_error_t startScan(T *object, void (T::*callbackMember)(const AdvertisementCallbackParams_t *params)) {
ble_error_t err = BLE_ERROR_NONE;
if (object && callbackMember) {
if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
scanningActive = true;
onAdvertisementReport.attach(object, callbackMember);
}
}
return err;
}
/**
* Initialize radio-notification events to be generated from the stack.
* This API doesn't need to be called directly.
*
* Radio Notification is a feature that enables ACTIVE and INACTIVE
* (nACTIVE) signals from the stack that notify the application when the
* radio is in use.
*
* The ACTIVE signal is sent before the radio event starts. The nACTIVE
* signal is sent at the end of the radio event. These signals can be used
* by the application programmer to synchronize application logic with radio
* activity. For example, the ACTIVE signal can be used to shut off external
* devices, to manage peak current drawn during periods when the radio is on,
* or to trigger sensor data collection for transmission in the Radio Event.
*
* @return BLE_ERROR_NONE on successful initialization, otherwise an error code.
*/
virtual ble_error_t initRadioNotification(void) {
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
}
private:
/**
* Helper function used to set the advertising data in the underlying BLE stack.
*
* @return BLE_ERROR_NONE if the advertising data was successfully set.
*/
ble_error_t setAdvertisingData(void) {
return setAdvertisingData(_advPayload, _scanResponse);
}
private:
/**
* Functionality that is BLE stack-dependent and must be implemented by the
* ported. This is a helper function to set the advertising data in the
* BLE stack.
*
* @param[in] advData
* The new advertising data.
* @param[in] scanResponse
* The new scan response data.
*
* @return BLE_ERROR_NONE if the advertising data was set successfully.
*/
virtual ble_error_t setAdvertisingData(const GapAdvertisingData &advData, const GapAdvertisingData &scanResponse) = 0;
/**
* Functionality that is BLE stack-dependent and must be implemented by the
* ported. This is a helper function to start the advertising procedure in
* the underlying BLE stack.
*
* @param[in]
* The advertising parameters.
*
* @return BLE_ERROR_NONE if the advertising procedure was successfully
* started.
*/
virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
public:
/**
* Accessor to read back currently active advertising parameters.
*
* @return A reference to the current advertising parameters.
*/
GapAdvertisingParams &getAdvertisingParams(void) {
return _advParams;
}
/**
* A const alternative to Gap::getAdvertisingParams().
*
* @return A const reference to the current advertising parameters.
*/
const GapAdvertisingParams &getAdvertisingParams(void) const {
return _advParams;
}
/**
* Set up a particular, user-constructed set of advertisement parameters for
* the underlying stack. It would be uncommon for this API to be used
* directly; there are other APIs to tweak advertisement parameters
* individually.
*
* @param[in] newParams
* The new advertising parameters.
*/
void setAdvertisingParams(const GapAdvertisingParams &newParams) {
_advParams = newParams;
}
/* Event callback handlers. */
public:
/**
* Set up a callback for timeout events. Refer to TimeoutSource_t for
* possible event types.
*
* @param[in] callback
* Event handler being registered.
*
* @note It is possible to unregister callbacks using onTimeout().detach(callback).
*/
void onTimeout(TimeoutEventCallback_t callback) {
timeoutCallbackChain.add(callback);
}
/**
* @brief Provide access to the callchain of timeout event callbacks.
*
* @note It is possible to register callbacks using onTimeout().add(callback).
*
* @note It is possible to unregister callbacks using onTimeout().detach(callback).
*
* @return A reference to the timeout event callbacks chain.
*/
TimeoutEventCallbackChain_t& onTimeout() {
return timeoutCallbackChain;
}
/**
* Append to a chain of callbacks to be invoked upon GAP connection.
*
* @param[in] callback
* Event handler being registered.
*
* @note It is possible to unregister callbacks using onConnection().detach(callback)
*/
void onConnection(ConnectionEventCallback_t callback) {
connectionCallChain.add(callback);
}
/**
* Same as Gap::onConnection(), but allows the possibility to add an object
* reference and member function as handler for connection event
* callbacks.
*
* @param[in] tptr
* Pointer to the object of a class defining the member callback
* function (@p mptr).
* @param[in] mptr
* The member callback (within the context of an object) to be
* invoked.
*/
template<typename T>
void onConnection(T *tptr, void (T::*mptr)(const ConnectionCallbackParams_t*)) {
connectionCallChain.add(tptr, mptr);
}
/**
* @brief Provide access to the callchain of connection event callbacks.
*
* @return A reference to the connection event callbacks chain.
*
* @note It is possible to register callbacks using onConnection().add(callback).
*
* @note It is possible to unregister callbacks using onConnection().detach(callback).
*/
ConnectionEventCallbackChain_t& onConnection() {
return connectionCallChain;
}
/**
* Append to a chain of callbacks to be invoked upon GAP disconnection.
*
* @param[in] callback
Event handler being registered.
*
* @note It is possible to unregister callbacks using onDisconnection().detach(callback).
*/
void onDisconnection(DisconnectionEventCallback_t callback) {
disconnectionCallChain.add(callback);
}
/**
* Same as Gap::onDisconnection(), but allows the possibility to add an object
* reference and member function as handler for disconnection event
* callbacks.
*
* @param[in] tptr
* Pointer to the object of a class defining the member callback
* function (@p mptr).
* @param[in] mptr
* The member callback (within the context of an object) to be
* invoked.
*/
template<typename T>
void onDisconnection(T *tptr, void (T::*mptr)(const DisconnectionCallbackParams_t*)) {
disconnectionCallChain.add(tptr, mptr);
}
/**
* @brief Provide access to the callchain of disconnection event callbacks.
*
* @return A reference to the disconnection event callback chain.
*
* @note It is possible to register callbacks using onDisconnection().add(callback).
*
* @note It is possible to unregister callbacks using onDisconnection().detach(callback).
*/
DisconnectionEventCallbackChain_t& onDisconnection() {
return disconnectionCallChain;
}
/**
* Set the application callback for radio-notification events.
*
* Radio Notification is a feature that enables ACTIVE and INACTIVE
* (nACTIVE) signals from the stack that notify the application when the
* radio is in use.
*
* The ACTIVE signal is sent before the radio event starts. The nACTIVE
* signal is sent at the end of the radio event. These signals can be used
* by the application programmer to synchronize application logic with radio
* activity. For example, the ACTIVE signal can be used to shut off external
* devices, to manage peak current drawn during periods when the radio is on,
* or to trigger sensor data collection for transmission in the Radio Event.
*
* @param[in] callback
* The application handler to be invoked in response to a radio
* ACTIVE/INACTIVE event.
*/
void onRadioNotification(void (*callback)(bool param)) {
radioNotificationCallback.attach(callback);
}
/**
* Same as Gap::onRadioNotification(), but allows the posibility to
* register an object reference and member function as handler for radio
* notification events.
*
* @param[in] tptr
* Pointer to the object of a class defining the member callback
* function (@p mptr).
* @param[in] mptr
* The member callback (within the context of an object) to be
* invoked in response to a radio ACTIVE/INACTIVE event.
*/
template <typename T>
void onRadioNotification(T *tptr, void (T::*mptr)(bool)) {
radioNotificationCallback.attach(tptr, mptr);
}
/**
* Setup a callback to be invoked to notify the user application that the
* Gap instance is about to shutdown (possibly as a result of a call
* to BLE::shutdown()).
*
* @param[in] callback
* The handler that is being registered to be notified of
* shutdown events.
*
* @note It is possible to chain together multiple onShutdown callbacks
* (potentially from different modules of an application) to be notified
* before the Gap instance is shutdown.
*
* @note It is also possible to set up a callback into a member function of
* some object.
*
* @note It is possible to unregister a callback using onShutdown().detach(callback)
*/
void onShutdown(const GapShutdownCallback_t& callback) {
shutdownCallChain.add(callback);
}
/**
* Same as Gap::onShutdown(), but allows the posibility to
* register an object reference and member function as handler for shutdown
* events.
*
* @param[in] objPtr
* Pointer to the object of a class defining the member callback
* function (@p memberPtr).
* @param[in] memberPtr
* The member callback (within the context of an object) to be
* invoked in response to a shutdown event.
*/
template <typename T>
void onShutdown(T *objPtr, void (T::*memberPtr)(void)) {
shutdownCallChain.add(objPtr, memberPtr);
}
/**
* @brief Provide access to the callchain of shutdown event callbacks.
*
* @return A reference to the shutdown event callback chain.
*
* @note It is possible to register callbacks using onShutdown().add(callback).
*
* @note It is possible to unregister callbacks using onShutdown().detach(callback).
*/
GapShutdownCallbackChain_t& onShutdown() {
return shutdownCallChain;
}
public:
/**
* Notify all registered onShutdown callbacks that the Gap instance is
* about to be shutdown and clear all Gap state of the
* associated object.
*
* This function is meant to be overridden in the platform-specific
* sub-class. Nevertheless, the sub-class is only expected to reset its
* state and not the data held in Gap members. This shall be achieved by a
* call to Gap::reset() from the sub-class' reset() implementation.
*
* @return BLE_ERROR_NONE on success.
*
* @note Currently a call to reset() does not reset the advertising and
* scan parameters to default values.
*/
virtual ble_error_t reset(void) {
/* Notify that the instance is about to shutdown */
shutdownCallChain.call(this);
shutdownCallChain.clear();
/* Clear Gap state */
state.advertising = 0;
state.connected = 0;
connectionCount = 0;
/* Clear scanning state */
scanningActive = false;
/* Clear advertising and scanning data */
_advPayload.clear();
_scanResponse.clear();
/* Clear callbacks */
timeoutCallbackChain.clear();
connectionCallChain.clear();
disconnectionCallChain.clear();
radioNotificationCallback = NULL;
onAdvertisementReport = NULL;
return BLE_ERROR_NONE;
}
protected:
/**
* Construct a Gap instance.
*/
Gap() :
_advParams(),
_advPayload(),
_scanningParams(),
_scanResponse(),
connectionCount(0),
state(),
scanningActive(false),
timeoutCallbackChain(),
radioNotificationCallback(),
onAdvertisementReport(),
connectionCallChain(),
disconnectionCallChain() {
_advPayload.clear();
_scanResponse.clear();
}
/* Entry points for the underlying stack to report events back to the user. */
public:
/**
* Helper function that notifies all registered handlers of an occurrence
* of a connection event. This function is meant to be called from the
* BLE stack specific implementation when a connection event occurs.
*
* @param[in] handle
* The ID of the connection that generated the event.
* @param[in] role
* The role of this BLE device in the connection.
* @param[in] peerAddrType
* The peer's BLE address type.
* @param[in] peerAddr
* The peer's BLE address.
* @param[in] ownAddrType
* This device's BLE address type.
* @param[in] ownAddr
* This device's BLE address.
* @param[in] connectionParams
* The parameters configured for this connection.
*/
void processConnectionEvent(Handle_t handle,
Role_t role,
BLEProtocol::AddressType_t peerAddrType,
const BLEProtocol::AddressBytes_t peerAddr,
BLEProtocol::AddressType_t ownAddrType,
const BLEProtocol::AddressBytes_t ownAddr,
const ConnectionParams_t *connectionParams) {
/* Update Gap state */
state.advertising = 0;
state.connected = 1;
++connectionCount;
ConnectionCallbackParams_t callbackParams(handle, role, peerAddrType, peerAddr, ownAddrType, ownAddr, connectionParams);
connectionCallChain.call(&callbackParams);
}
/**
* Helper function that notifies all registered handlers of an occurrence
* of a disconnection event. This function is meant to be called from the
* BLE stack specific implementation when a disconnection event occurs.
*
* @param[in] handle
* The ID of the connection that generated the event.
* @param[in] reason
* The reason for disconnection.
*/
void processDisconnectionEvent(Handle_t handle, DisconnectionReason_t reason) {
/* Update Gap state */
--connectionCount;
if (!connectionCount) {
state.connected = 0;
}
DisconnectionCallbackParams_t callbackParams(handle, reason);
disconnectionCallChain.call(&callbackParams);
}
/**
* Helper function that notifies the registered handler of a scanned
* advertisement packet. This function is meant to be called from the
* BLE stack specific implementation when a such event occurs.
*
* @param[in] peerAddr
* The peer's BLE address.
* @param[in] rssi
* The advertisement packet RSSI value.
* @param[in] isScanReponse
* Whether this packet is the response to a scan request.
* @param[in] type
* The type of advertisement.
* @param[in] advertisingDataLen
* Length of the advertisement data.
* @param[in] advertisingData
* Pointer to the advertisement packet's data.
*/
void processAdvertisementReport(const BLEProtocol::AddressBytes_t peerAddr,
int8_t rssi,
bool isScanResponse,
GapAdvertisingParams::AdvertisingType_t type,
uint8_t advertisingDataLen,
const uint8_t *advertisingData) {
AdvertisementCallbackParams_t params;
memcpy(params.peerAddr, peerAddr, ADDR_LEN);
params.rssi = rssi;
params.isScanResponse = isScanResponse;
params.type = type;
params.advertisingDataLen = advertisingDataLen;
params.advertisingData = advertisingData;
onAdvertisementReport.call(¶ms);
}
/**
* Helper function that notifies all registered handlers of an occurrence
* of a timeout event. This function is meant to be called from the
* BLE stack specific implementation when a timeout event occurs.
*
* @param[in] source
* The source of the timout event.
*/
void processTimeoutEvent(TimeoutSource_t source) {
if (source == TIMEOUT_SRC_ADVERTISING) {
/* Update gap state if the source is an advertising timeout */
state.advertising = 0;
}
if (timeoutCallbackChain) {
timeoutCallbackChain(source);
}
}
protected:
/**
* Currently set advertising parameters.
*/
GapAdvertisingParams _advParams;
/**
* Currently set advertising data.
*/
GapAdvertisingData _advPayload;
/**
* Currently set scanning parameters.
*/
GapScanningParams _scanningParams;
/**
* Currently set scan response data.
*/
GapAdvertisingData _scanResponse;
/**
* Total number of open connections.
*/
uint8_t connectionCount;
/**
* The current GAP state.
*/
GapState_t state;
/**
* Whether active scanning is set. This is used to fetch the scan response
* from a peer if possible.
*/
bool scanningActive;
protected:
/**
* Callchain containing all registered callback handlers for timeout
* events.
*/
TimeoutEventCallbackChain_t timeoutCallbackChain;
/**
* The registered callback handler for radio notification events.
*/
RadioNotificationEventCallback_t radioNotificationCallback;
/**
* The registered callback handler for scanned advertisement packet
* notifications.
*/
AdvertisementReportCallback_t onAdvertisementReport;
/**
* Callchain containing all registered callback handlers for connection
* events.
*/
ConnectionEventCallbackChain_t connectionCallChain;
/**
* Callchain containing all registered callback handlers for disconnection
* events.
*/
DisconnectionEventCallbackChain_t disconnectionCallChain;
private:
/**
* Callchain containing all registered callback handlers for shutdown
* events.
*/
GapShutdownCallbackChain_t shutdownCallChain;
private:
/* Disallow copy and assignment. */
Gap(const Gap &);
Gap& operator=(const Gap &);
};
#endif // ifndef __GAP_H__