File content as of revision 540:1fb1e0b809eb:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef __GATT_CLIENT_H__
#define __GATT_CLIENT_H__

#include "Gap.h"
#include "GattAttribute.h"
#include "ServiceDiscovery.h"

#include "GattCallbackParamTypes.h"

class GattClient {
public:
    typedef void (*ReadCallback_t)(const GattReadCallbackParams *params);

    enum WriteOp_t {
        GATT_OP_WRITE_REQ      = 0x01,  /**< Write Request. */
        GATT_OP_WRITE_CMD      = 0x02,  /**< Write Command. */
    };

    typedef void (*WriteCallback_t)(const GattWriteCallbackParams *params);

public:
    /**
     * Launch service discovery. Once launched, service discovery will remain
     * active with callbacks being issued back into the application for matching
     * services/characteristics. isServiceDiscoveryActive() can be used to
     * determine status; and a termination callback (if setup) will be invoked
     * at the end. Service discovery can be terminated prematurely if needed
     * using terminateServiceDiscovery().
     *
     * @param  connectionHandle
     *           Handle for the connection with the peer.
     * @param  sc
     *           This is the application callback for matching service. Taken as
     *           NULL by default. Note: service discovery may still be active
     *           when this callback is issued; calling asynchronous BLE-stack
     *           APIs from within this application callback might cause the
     *           stack to abort service discovery. If this becomes an issue, it
     *           may be better to make local copy of the discoveredService and
     *           wait for service discovery to terminate before operating on the
     *           service.
     * @param  cc
     *           This is the application callback for matching characteristic.
     *           Taken as NULL by default. Note: service discovery may still be
     *           active when this callback is issued; calling asynchronous
     *           BLE-stack APIs from within this application callback might cause
     *           the stack to abort service discovery. If this becomes an issue,
     *           it may be better to make local copy of the discoveredCharacteristic
     *           and wait for service discovery to terminate before operating on the
     *           characteristic.
     * @param  matchingServiceUUID
     *           UUID based filter for specifying a service in which the application is
     *           interested. By default it is set as the wildcard UUID_UNKNOWN,
     *           in which case it matches all services. If characteristic-UUID
     *           filter (below) is set to the wildcard value, then a service
     *           callback will be invoked for the matching service (or for every
     *           service if the service filter is a wildcard).
     * @param  matchingCharacteristicUUIDIn
     *           UUID based filter for specifying characteristic in which the application
     *           is interested. By default it is set as the wildcard UUID_UKNOWN
     *           to match against any characteristic. If both service-UUID
     *           filter and characteristic-UUID filter are used with non- wildcard
     *           values, then only a single characteristic callback is
     *           invoked for the matching characteristic.
     *
     * @note     Using wildcard values for both service-UUID and characteristic-
     *           UUID will result in complete service discovery--callbacks being
     *           called for every service and characteristic.
     *

     * @note     Providing NULL for the characteristic callback will result in
     *           characteristic discovery being skipped. This allows for an
     *           inexpensive method to discover services.
     *
     * @return
     *           BLE_ERROR_NONE if service discovery is launched successfully; else an appropriate error.
     */
    virtual ble_error_t launchServiceDiscovery(Gap::Handle_t                               connectionHandle,
                                               ServiceDiscovery::ServiceCallback_t         sc                           = NULL,
                                               ServiceDiscovery::CharacteristicCallback_t  cc                           = NULL,
                                               const UUID                                 &matchingServiceUUID          = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN),
                                               const UUID                                 &matchingCharacteristicUUIDIn = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN)) = 0;

    /**
     * Setup callback for when serviceDiscovery terminates.
     */
    virtual void onServiceDiscoveryTermination(ServiceDiscovery::TerminationCallback_t callback) = 0;

    /**
     * Is service-discovery currently active?
     */
    virtual bool isServiceDiscoveryActive(void) const = 0;

    /**
     * Terminate an ongoing service-discovery. This should result in an
     * invocation of the TerminationCallback if service-discovery is active.
     */
    virtual void terminateServiceDiscovery(void) = 0;

    /* Initiate a Gatt Client read procedure by attribute-handle.*/
    virtual ble_error_t read(Gap::Handle_t connHandle, GattAttribute::Handle_t attributeHandle, uint16_t offset) const = 0;

    /**
     * Initiate a GATT Client write procedure.
     *
     * @param[in] cmd
     *              Command can be either a write-request (which generates a
     *              matching response from the peripheral), or a write-command,
     *              which doesn't require the connected peer to respond.
     * @param[in] connHandle
     *              Connection handle.
     * @param[in] attributeHandle
     *              handle for the target attribtue on the remote GATT server.
     * @param[in] length
     *              length of the new value.
     * @param[in] value
     *              new value being written.
     */
    virtual ble_error_t write(GattClient::WriteOp_t    cmd,
                              Gap::Handle_t            connHandle,
                              GattAttribute::Handle_t  attributeHandle,
                              size_t                   length,
                              const uint8_t           *value) const = 0;

protected:
    GattClient() {
        /* empty */
    }

private:
    /* disallow copy and assignment */
    GattClient(const GattClient &);
    GattClient& operator=(const GattClient &);
};

#endif // ifndef __GATT_CLIENT_H__