Cristi Stoican / BLE_API

jgh

Dependents:   Migration

Fork of BLE_API by Bluetooth Low Energy

ble/DiscoveredCharacteristic.h@1077:98d37e26903c, 2016-01-11 (annotated)

Committer:
vcoubard
Date:
Mon Jan 11 08:51:43 2016 +0000
Revision:
1077:98d37e26903c
Parent:
1074:1fedc77d9add
Child:
1078:79c089630b38
Synchronized with git rev 4dda9bf1

Author: Vincent Coubard

Fix function names:

  - isCharacteristicDescriptorsDiscoveryActive => isCharacteristicDescriptorDiscoveryActive

  - terminateCharacteristicDescriptorsDiscovery =>terminateCharacteristicDescriptorDiscovery

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rgrover1 716:11b41f651697 1 /* mbed Microcontroller Library
rgrover1 716:11b41f651697 2 * Copyright (c) 2006-2013 ARM Limited
rgrover1 716:11b41f651697 3 *
rgrover1 716:11b41f651697 4 * Licensed under the Apache License, Version 2.0 (the "License");
rgrover1 716:11b41f651697 5 * you may not use this file except in compliance with the License.
rgrover1 716:11b41f651697 6 * You may obtain a copy of the License at
rgrover1 716:11b41f651697 7 *
rgrover1 716:11b41f651697 8 * http://www.apache.org/licenses/LICENSE-2.0
rgrover1 716:11b41f651697 9 *
rgrover1 716:11b41f651697 10 * Unless required by applicable law or agreed to in writing, software
rgrover1 716:11b41f651697 11 * distributed under the License is distributed on an "AS IS" BASIS,
rgrover1 716:11b41f651697 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1 716:11b41f651697 13 * See the License for the specific language governing permissions and
rgrover1 716:11b41f651697 14 * limitations under the License.
rgrover1 716:11b41f651697 15 */
rgrover1 716:11b41f651697 16
rgrover1 716:11b41f651697 17 #ifndef __DISCOVERED_CHARACTERISTIC_H__
rgrover1 716:11b41f651697 18 #define __DISCOVERED_CHARACTERISTIC_H__
rgrover1 716:11b41f651697 19
rgrover1 716:11b41f651697 20 #include "UUID.h"
rgrover1 716:11b41f651697 21 #include "Gap.h"
rgrover1 716:11b41f651697 22 #include "GattAttribute.h"
rgrover1 716:11b41f651697 23 #include "GattClient.h"
vcoubard 1077:98d37e26903c 24 #include "CharacteristicDescriptorDiscovery.h"
vcoubard 1077:98d37e26903c 25 #include "ble/DiscoveredCharacteristicDescriptor.h"
vcoubard 1063:187f9929cb60 26
rgrover1 716:11b41f651697 27 /**
vcoubard 1077:98d37e26903c 28 * @brief Representation of a characteristic discovered during a GattClient
vcoubard 1077:98d37e26903c 29 * discovery procedure (see GattClient::launchServiceDiscovery ).
vcoubard 1077:98d37e26903c 30 *
vcoubard 1077:98d37e26903c 31 * @detail Provide detailed informations about a discovered characteristic like:
vcoubard 1077:98d37e26903c 32 * - Its UUID (see #getUUID).
vcoubard 1077:98d37e26903c 33 * - The most important handles of the characteristic definition
vcoubard 1077:98d37e26903c 34 * (see #getDeclHandle, #getValueHandle, #getLastHandle )
vcoubard 1077:98d37e26903c 35 * - Its properties (see #getProperties).
vcoubard 1077:98d37e26903c 36 * This class also provide functions to operate on the characteristic:
vcoubard 1077:98d37e26903c 37 * - Read the characteristic value (see #read)
vcoubard 1077:98d37e26903c 38 * - Writing a characteristic value (see #write or #writeWoResponse)
vcoubard 1077:98d37e26903c 39 * - Discover descriptors inside the characteristic definition. These descriptors
vcoubard 1077:98d37e26903c 40 * extends the characteristic. More information about descriptor usage is
vcoubard 1077:98d37e26903c 41 * available in DiscoveredCharacteristicDescriptor class.
rgrover1 716:11b41f651697 42 */
rgrover1 716:11b41f651697 43 class DiscoveredCharacteristic {
rgrover1 716:11b41f651697 44 public:
rgrover1 716:11b41f651697 45 struct Properties_t {
vcoubard 1048:efb29faf12fc 46 uint8_t _broadcast :1; /**< Broadcasting the value permitted. */
rgrover1 716:11b41f651697 47 uint8_t _read :1; /**< Reading the value permitted. */
rgrover1 716:11b41f651697 48 uint8_t _writeWoResp :1; /**< Writing the value with Write Command permitted. */
rgrover1 716:11b41f651697 49 uint8_t _write :1; /**< Writing the value with Write Request permitted. */
vcoubard 1077:98d37e26903c 50 uint8_t _notify :1; /**< Notifications of the value permitted. */
rgrover1 716:11b41f651697 51 uint8_t _indicate :1; /**< Indications of the value permitted. */
rgrover1 716:11b41f651697 52 uint8_t _authSignedWrite :1; /**< Writing the value with Signed Write Command permitted. */
rgrover1 716:11b41f651697 53
rgrover1 716:11b41f651697 54 public:
rgrover1 716:11b41f651697 55 bool broadcast(void) const {return _broadcast; }
rgrover1 716:11b41f651697 56 bool read(void) const {return _read; }
rgrover1 716:11b41f651697 57 bool writeWoResp(void) const {return _writeWoResp; }
rgrover1 716:11b41f651697 58 bool write(void) const {return _write; }
rgrover1 716:11b41f651697 59 bool notify(void) const {return _notify; }
rgrover1 716:11b41f651697 60 bool indicate(void) const {return _indicate; }
rgrover1 716:11b41f651697 61 bool authSignedWrite(void) const {return _authSignedWrite;}
rgrover1 716:11b41f651697 62
vcoubard 1077:98d37e26903c 63 /**
vcoubard 1077:98d37e26903c 64 * @brief "Equal to" operator for DiscoveredCharacteristic::Properties_t
vcoubard 1077:98d37e26903c 65 *
vcoubard 1077:98d37e26903c 66 * @param lhs[in] The left hand side of the equality expression
vcoubard 1077:98d37e26903c 67 * @param rhs[in] The right hand side of the equality expression
vcoubard 1077:98d37e26903c 68 *
vcoubard 1077:98d37e26903c 69 * @return true if operands are equals, false otherwise.
vcoubard 1077:98d37e26903c 70 */
vcoubard 1077:98d37e26903c 71 friend bool operator==(Properties_t lhs, Properties_t rhs) {
vcoubard 1077:98d37e26903c 72 return lhs._broadcast == rhs._broadcast &&
vcoubard 1077:98d37e26903c 73 lhs._read == rhs._read &&
vcoubard 1077:98d37e26903c 74 lhs._writeWoResp == rhs._writeWoResp &&
vcoubard 1077:98d37e26903c 75 lhs._write == rhs._write &&
vcoubard 1077:98d37e26903c 76 lhs._notify == rhs._notify &&
vcoubard 1077:98d37e26903c 77 lhs._indicate == rhs._indicate &&
vcoubard 1077:98d37e26903c 78 lhs._authSignedWrite == rhs._authSignedWrite;
vcoubard 1077:98d37e26903c 79 }
vcoubard 1077:98d37e26903c 80
vcoubard 1077:98d37e26903c 81 /**
vcoubard 1077:98d37e26903c 82 * @brief "Not equal to" operator for DiscoveredCharacteristic::Properties_t
vcoubard 1077:98d37e26903c 83 *
vcoubard 1077:98d37e26903c 84 * @param lhs The right hand side of the expression
vcoubard 1077:98d37e26903c 85 * @param rhs The left hand side of the expression
vcoubard 1077:98d37e26903c 86 *
vcoubard 1077:98d37e26903c 87 * @return true if operands are not equals, false otherwise.
vcoubard 1077:98d37e26903c 88 */
vcoubard 1077:98d37e26903c 89 friend bool operator!=(Properties_t lhs, Properties_t rhs) {
vcoubard 1077:98d37e26903c 90 return !(lhs == rhs);
vcoubard 1077:98d37e26903c 91 }
vcoubard 1077:98d37e26903c 92
rgrover1 716:11b41f651697 93 private:
vcoubard 1048:efb29faf12fc 94 operator uint8_t() const; /* Disallow implicit conversion into an integer. */
vcoubard 1048:efb29faf12fc 95 operator unsigned() const; /* Disallow implicit conversion into an integer. */
rgrover1 716:11b41f651697 96 };
rgrover1 716:11b41f651697 97
rgrover1 716:11b41f651697 98 /**
rgrover1 716:11b41f651697 99 * Initiate (or continue) a read for the value attribute, optionally at a
vcoubard 1048:efb29faf12fc 100 * given offset. If the characteristic or descriptor to be read is longer
rgrover1 716:11b41f651697 101 * than ATT_MTU - 1, this function must be called multiple times with
rgrover1 716:11b41f651697 102 * appropriate offset to read the complete value.
rgrover1 716:11b41f651697 103 *
vcoubard 1077:98d37e26903c 104 * @param offset[in] The position - in the characteristic value bytes stream - where
vcoubard 1077:98d37e26903c 105 * the read operation begin.
vcoubard 1077:98d37e26903c 106 *
vcoubard 1048:efb29faf12fc 107 * @return BLE_ERROR_NONE if a read has been initiated, or
rgrover1 716:11b41f651697 108 * BLE_ERROR_INVALID_STATE if some internal state about the connection is invalid, or
vcoubard 1048:efb29faf12fc 109 * BLE_STACK_BUSY if some client procedure is already in progress, or
rgrover1 716:11b41f651697 110 * BLE_ERROR_OPERATION_NOT_PERMITTED due to the characteristic's properties.
rgrover1 716:11b41f651697 111 */
rgrover1 716:11b41f651697 112 ble_error_t read(uint16_t offset = 0) const;
rgrover1 716:11b41f651697 113
vcoubard 1077:98d37e26903c 114 /**
vcoubard 1077:98d37e26903c 115 * @brief Same as #read(uint16_t) const but allow the user to register a callback
vcoubard 1077:98d37e26903c 116 * which will be fired once the read is done.
vcoubard 1077:98d37e26903c 117 *
vcoubard 1077:98d37e26903c 118 * @param offset[in] The position - in the characteristic value bytes stream - where
vcoubard 1077:98d37e26903c 119 * the read operation begin.
vcoubard 1077:98d37e26903c 120 * @param onRead[in] Continuation of the read operation
vcoubard 1077:98d37e26903c 121 */
vcoubard 1052:b55e1ad3e1b3 122 ble_error_t read(uint16_t offset, const GattClient::ReadCallback_t& onRead) const;
vcoubard 1052:b55e1ad3e1b3 123
rgrover1 716:11b41f651697 124 /**
rgrover1 716:11b41f651697 125 * Perform a write without response procedure.
rgrover1 716:11b41f651697 126 *
vcoubard 1077:98d37e26903c 127 * @param[in] length
rgrover1 716:11b41f651697 128 * The amount of data being written.
vcoubard 1077:98d37e26903c 129 * @param[in] value
rgrover1 716:11b41f651697 130 * The bytes being written.
rgrover1 716:11b41f651697 131 *
rgrover1 716:11b41f651697 132 * @note It is important to note that a write without response will generate
rgrover1 716:11b41f651697 133 * an onDataSent() callback when the packet has been transmitted. There
rgrover1 716:11b41f651697 134 * will be a BLE-stack specific limit to the number of pending
rgrover1 716:11b41f651697 135 * writeWoResponse operations; the user may want to use the onDataSent()
rgrover1 716:11b41f651697 136 * callback for flow-control.
rgrover1 716:11b41f651697 137 *
vcoubard 1048:efb29faf12fc 138 * @retval BLE_ERROR_NONE Successfully started the Write procedure, or
rgrover1 716:11b41f651697 139 * BLE_ERROR_INVALID_STATE if some internal state about the connection is invalid, or
vcoubard 1048:efb29faf12fc 140 * BLE_STACK_BUSY if some client procedure is already in progress, or
rgrover1 716:11b41f651697 141 * BLE_ERROR_NO_MEM if there are no available buffers left to process the request, or
rgrover1 716:11b41f651697 142 * BLE_ERROR_OPERATION_NOT_PERMITTED due to the characteristic's properties.
rgrover1 716:11b41f651697 143 */
rgrover1 716:11b41f651697 144 ble_error_t writeWoResponse(uint16_t length, const uint8_t *value) const;
rgrover1 716:11b41f651697 145
rgrover1 716:11b41f651697 146 /**
rgrover1 716:11b41f651697 147 * Initiate a GATT Characteristic Descriptor Discovery procedure for descriptors within this characteristic.
rgrover1 716:11b41f651697 148 *
vcoubard 1077:98d37e26903c 149 * @param[in] onDescriptorDiscovered This callback will be called every time a descriptor is discovered
vcoubard 1077:98d37e26903c 150 * @param[in] onTermination This callback will be called when the discovery process is over.
rgrover1 716:11b41f651697 151 *
vcoubard 1077:98d37e26903c 152 * @return BLE_ERROR_NONE if descriptor discovery is launched successfully; else an appropriate error.
rgrover1 716:11b41f651697 153 */
vcoubard 1077:98d37e26903c 154 ble_error_t discoverDescriptors(const CharacteristicDescriptorDiscovery::DiscoveryCallback_t& onDescriptorDiscovered,
vcoubard 1077:98d37e26903c 155 const CharacteristicDescriptorDiscovery::TerminationCallback_t& onTermination) const;
rgrover1 716:11b41f651697 156
rgrover1 716:11b41f651697 157 /**
rgrover1 716:11b41f651697 158 * Perform a write procedure.
rgrover1 716:11b41f651697 159 *
vcoubard 1077:98d37e26903c 160 * @param[in] length
rgrover1 716:11b41f651697 161 * The amount of data being written.
vcoubard 1077:98d37e26903c 162 * @param[in] value
rgrover1 716:11b41f651697 163 * The bytes being written.
rgrover1 716:11b41f651697 164 *
rgrover1 716:11b41f651697 165 * @note It is important to note that a write will generate
rgrover1 716:11b41f651697 166 * an onDataWritten() callback when the peer acknowledges the request.
rgrover1 716:11b41f651697 167 *
vcoubard 1048:efb29faf12fc 168 * @retval BLE_ERROR_NONE Successfully started the Write procedure, or
rgrover1 716:11b41f651697 169 * BLE_ERROR_INVALID_STATE if some internal state about the connection is invalid, or
vcoubard 1048:efb29faf12fc 170 * BLE_STACK_BUSY if some client procedure is already in progress, or
rgrover1 716:11b41f651697 171 * BLE_ERROR_NO_MEM if there are no available buffers left to process the request, or
rgrover1 716:11b41f651697 172 * BLE_ERROR_OPERATION_NOT_PERMITTED due to the characteristic's properties.
rgrover1 716:11b41f651697 173 */
rgrover1 716:11b41f651697 174 ble_error_t write(uint16_t length, const uint8_t *value) const;
rgrover1 716:11b41f651697 175
vcoubard 1056:ce2fb3d09929 176 /**
vcoubard 1077:98d37e26903c 177 * Same as #write(uint16_t, const uint8_t *) const but register a callback
vcoubard 1077:98d37e26903c 178 * which will be called once the data has been written.
vcoubard 1077:98d37e26903c 179 *
vcoubard 1077:98d37e26903c 180 * @param[in] length The amount of bytes to write.
vcoubard 1077:98d37e26903c 181 * @param[in] value The bytes to write.
vcoubard 1077:98d37e26903c 182 * @param[in] onRead Continuation callback for the write operation
vcoubard 1052:b55e1ad3e1b3 183 */
vcoubard 1077:98d37e26903c 184 ble_error_t write(uint16_t length, const uint8_t *value, const GattClient::WriteCallback_t& onWrite) const;
vcoubard 1052:b55e1ad3e1b3 185
vcoubard 1056:ce2fb3d09929 186 void setupLongUUID(UUID::LongUUIDBytes_t longUUID, UUID::ByteOrder_t order = UUID::MSB) {
vcoubard 1056:ce2fb3d09929 187 uuid.setupLong(longUUID, order);
rgrover1 716:11b41f651697 188 }
rgrover1 716:11b41f651697 189
rgrover1 716:11b41f651697 190 public:
vcoubard 1077:98d37e26903c 191 /**
vcoubard 1077:98d37e26903c 192 * @brief Get the UUID of the discovered characteristic
vcoubard 1077:98d37e26903c 193 * @return the UUID of this characteristic
vcoubard 1077:98d37e26903c 194 */
rgrover1 741:d6dceefb844e 195 const UUID& getUUID(void) const {
rgrover1 741:d6dceefb844e 196 return uuid;
rgrover1 716:11b41f651697 197 }
rgrover1 716:11b41f651697 198
vcoubard 1077:98d37e26903c 199 /**
vcoubard 1077:98d37e26903c 200 * @brief Get the properties of this characteristic
vcoubard 1077:98d37e26903c 201 * @return the set of properties of this characteristic
vcoubard 1077:98d37e26903c 202 */
rgrover1 716:11b41f651697 203 const Properties_t& getProperties(void) const {
rgrover1 716:11b41f651697 204 return props;
rgrover1 716:11b41f651697 205 }
rgrover1 716:11b41f651697 206
vcoubard 1077:98d37e26903c 207 /**
vcoubard 1077:98d37e26903c 208 * @brief Get the declaration handle of this characteristic.
vcoubard 1077:98d37e26903c 209 * @detail The declaration handle is the first handle of a characteristic
vcoubard 1077:98d37e26903c 210 * definition. The value accessible at this handle contains the following
vcoubard 1077:98d37e26903c 211 * informations:
vcoubard 1077:98d37e26903c 212 * - The characteristics properties (see Properties_t). This value can
vcoubard 1077:98d37e26903c 213 * be accessed by using #getProperties .
vcoubard 1077:98d37e26903c 214 * - The characteristic value attribute handle. This field can be accessed
vcoubard 1077:98d37e26903c 215 * by using #getValueHandle .
vcoubard 1077:98d37e26903c 216 * - The characteristic UUID, this value can be accessed by using the
vcoubard 1077:98d37e26903c 217 * function #getUUID .
vcoubard 1077:98d37e26903c 218 * @return the declaration handle of this characteristic.
vcoubard 1077:98d37e26903c 219 */
vcoubard 1077:98d37e26903c 220 GattAttribute::Handle_t getDeclHandle(void) const {
rgrover1 716:11b41f651697 221 return declHandle;
rgrover1 716:11b41f651697 222 }
vcoubard 1077:98d37e26903c 223
vcoubard 1077:98d37e26903c 224 /**
vcoubard 1077:98d37e26903c 225 * @brief Return the handle used to access the value of this characteristic.
vcoubard 1077:98d37e26903c 226 * @details This handle is the one provided in the characteristic declaration
vcoubard 1077:98d37e26903c 227 * value. Usually, it is equal to #getDeclHandle() + 1. But it is not always
vcoubard 1077:98d37e26903c 228 * the case. Anyway, users are allowed to use #getDeclHandle() + 1 to access
vcoubard 1077:98d37e26903c 229 * the value of a characteristic.
vcoubard 1077:98d37e26903c 230 * @return The handle to access the value of this characteristic.
vcoubard 1077:98d37e26903c 231 */
vcoubard 1077:98d37e26903c 232 GattAttribute::Handle_t getValueHandle(void) const {
rgrover1 716:11b41f651697 233 return valueHandle;
rgrover1 716:11b41f651697 234 }
rgrover1 716:11b41f651697 235
vcoubard 1077:98d37e26903c 236 /**
vcoubard 1077:98d37e26903c 237 * @brief Return the last handle of the characteristic definition.
vcoubard 1077:98d37e26903c 238 * @details A Characteristic definition can contain a lot of handles:
vcoubard 1077:98d37e26903c 239 * - one for the declaration (see #getDeclHandle)
vcoubard 1077:98d37e26903c 240 * - one for the value (see #getValueHandle)
vcoubard 1077:98d37e26903c 241 * - zero of more for the characteristic descriptors.
vcoubard 1077:98d37e26903c 242 * This handle is the last handle of the characteristic definition.
vcoubard 1077:98d37e26903c 243 * @return The last handle of this characteristic definition.
vcoubard 1077:98d37e26903c 244 */
vcoubard 1077:98d37e26903c 245 GattAttribute::Handle_t getLastHandle(void) const {
vcoubard 1077:98d37e26903c 246 return lastHandle;
vcoubard 1077:98d37e26903c 247 }
vcoubard 1077:98d37e26903c 248
vcoubard 1077:98d37e26903c 249 /**
vcoubard 1077:98d37e26903c 250 * @brief Return the GattClient which can operate on this characteristic.
vcoubard 1077:98d37e26903c 251 * @return The GattClient which can operate on this characteristic.
vcoubard 1077:98d37e26903c 252 */
vcoubard 1077:98d37e26903c 253 GattClient* getGattClient() {
vcoubard 1077:98d37e26903c 254 return gattc;
vcoubard 1077:98d37e26903c 255 }
vcoubard 1077:98d37e26903c 256
vcoubard 1077:98d37e26903c 257 /**
vcoubard 1077:98d37e26903c 258 * @brief Return the GattClient which can operate on this characteristic.
vcoubard 1077:98d37e26903c 259 * @return The GattClient which can operate on this characteristic.
vcoubard 1077:98d37e26903c 260 */
vcoubard 1077:98d37e26903c 261 const GattClient* getGattClient() const {
vcoubard 1077:98d37e26903c 262 return gattc;
vcoubard 1077:98d37e26903c 263 }
vcoubard 1077:98d37e26903c 264
vcoubard 1077:98d37e26903c 265 /**
vcoubard 1077:98d37e26903c 266 * @brief Return the connection handle to the GattServer which contain
vcoubard 1077:98d37e26903c 267 * this characteristic.
vcoubard 1077:98d37e26903c 268 * @return the connection handle to the GattServer which contain
vcoubard 1077:98d37e26903c 269 * this characteristic.
vcoubard 1077:98d37e26903c 270 */
vcoubard 1077:98d37e26903c 271 Gap::Handle_t getConnectionHandle() const {
vcoubard 1077:98d37e26903c 272 return connHandle;
vcoubard 1077:98d37e26903c 273 }
vcoubard 1077:98d37e26903c 274
vcoubard 1077:98d37e26903c 275 /**
vcoubard 1077:98d37e26903c 276 * @brief "Equal to" operator for DiscoveredCharacteristic
vcoubard 1077:98d37e26903c 277 *
vcoubard 1077:98d37e26903c 278 * @param lhs[in] The left hand side of the equality expression
vcoubard 1077:98d37e26903c 279 * @param rhs[in] The right hand side of the equality expression
vcoubard 1077:98d37e26903c 280 *
vcoubard 1077:98d37e26903c 281 * @return true if operands are equals, false otherwise.
vcoubard 1077:98d37e26903c 282 */
vcoubard 1077:98d37e26903c 283 friend bool operator==(const DiscoveredCharacteristic& lhs, const DiscoveredCharacteristic& rhs) {
vcoubard 1077:98d37e26903c 284 return lhs.gattc == rhs.gattc &&
vcoubard 1077:98d37e26903c 285 lhs.uuid == rhs.uuid &&
vcoubard 1077:98d37e26903c 286 lhs.props == rhs.props &&
vcoubard 1077:98d37e26903c 287 lhs.declHandle == rhs.declHandle &&
vcoubard 1077:98d37e26903c 288 lhs.valueHandle == rhs.valueHandle &&
vcoubard 1077:98d37e26903c 289 lhs.lastHandle == rhs.lastHandle &&
vcoubard 1077:98d37e26903c 290 lhs.connHandle == rhs.connHandle;
vcoubard 1077:98d37e26903c 291 }
vcoubard 1077:98d37e26903c 292
vcoubard 1077:98d37e26903c 293 /**
vcoubard 1077:98d37e26903c 294 * @brief "Not equal to" operator for DiscoveredCharacteristic
vcoubard 1077:98d37e26903c 295 *
vcoubard 1077:98d37e26903c 296 * @param lhs[in] The right hand side of the expression
vcoubard 1077:98d37e26903c 297 * @param rhs[in] The left hand side of the expression
vcoubard 1077:98d37e26903c 298 *
vcoubard 1077:98d37e26903c 299 * @return true if operands are not equals, false otherwise.
vcoubard 1077:98d37e26903c 300 */
vcoubard 1077:98d37e26903c 301 friend bool operator !=(const DiscoveredCharacteristic& lhs, const DiscoveredCharacteristic& rhs) {
vcoubard 1077:98d37e26903c 302 return !(lhs == rhs);
vcoubard 1077:98d37e26903c 303 }
vcoubard 1077:98d37e26903c 304
rgrover1 716:11b41f651697 305 public:
rgrover1 716:11b41f651697 306 DiscoveredCharacteristic() : gattc(NULL),
rgrover1 716:11b41f651697 307 uuid(UUID::ShortUUIDBytes_t(0)),
rgrover1 716:11b41f651697 308 props(),
rgrover1 716:11b41f651697 309 declHandle(GattAttribute::INVALID_HANDLE),
vcoubard 1077:98d37e26903c 310 valueHandle(GattAttribute::INVALID_HANDLE),
vcoubard 1077:98d37e26903c 311 lastHandle(GattAttribute::INVALID_HANDLE),
vcoubard 1077:98d37e26903c 312 connHandle() {
rgrover1 716:11b41f651697 313 /* empty */
rgrover1 716:11b41f651697 314 }
rgrover1 716:11b41f651697 315
rgrover1 716:11b41f651697 316 protected:
rgrover1 716:11b41f651697 317 GattClient *gattc;
rgrover1 716:11b41f651697 318
rgrover1 716:11b41f651697 319 protected:
rgrover1 716:11b41f651697 320 UUID uuid;
rgrover1 716:11b41f651697 321 Properties_t props;
rgrover1 716:11b41f651697 322 GattAttribute::Handle_t declHandle;
rgrover1 716:11b41f651697 323 GattAttribute::Handle_t valueHandle;
vcoubard 1077:98d37e26903c 324 GattAttribute::Handle_t lastHandle;
rgrover1 716:11b41f651697 325
rgrover1 716:11b41f651697 326 Gap::Handle_t connHandle;
rgrover1 716:11b41f651697 327 };
rgrover1 716:11b41f651697 328
rgrover1 716:11b41f651697 329 #endif /*__DISCOVERED_CHARACTERISTIC_H__*/