BLE_API - jgh

Users » stoicancristi » Code » BLE_API

jgh

Fork of BLE_API by Bluetooth Low Energy

public/BLE.h@537:00d5affbb2b2, 2015-06-19 (annotated)

Committer:: rgrover1
Date:: Fri Jun 19 15:52:08 2015 +0100
Revision:: 537:00d5affbb2b2
Parent:: 533:c2aafeedaf8c
Child:: 538:fff02872b62f

Synchronized with git rev 68683f1c

Author: Rohit Grover

deprecate all GAP APIs from within BLE;

add consistent comment headers.

Who changed what in which revision?

User	Revision	Line number	New contents of line
rgrover1	528:8d21604fe31d	1	/* mbed Microcontroller Library
rgrover1	528:8d21604fe31d	2	* Copyright (c) 2006-2013 ARM Limited
rgrover1	528:8d21604fe31d	3	*
rgrover1	528:8d21604fe31d	4	* Licensed under the Apache License, Version 2.0 (the "License");
rgrover1	528:8d21604fe31d	5	* you may not use this file except in compliance with the License.
rgrover1	528:8d21604fe31d	6	* You may obtain a copy of the License at
rgrover1	528:8d21604fe31d	7	*
rgrover1	528:8d21604fe31d	8	* http://www.apache.org/licenses/LICENSE-2.0
rgrover1	528:8d21604fe31d	9	*
rgrover1	528:8d21604fe31d	10	* Unless required by applicable law or agreed to in writing, software
rgrover1	528:8d21604fe31d	11	* distributed under the License is distributed on an "AS IS" BASIS,
rgrover1	528:8d21604fe31d	12	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1	528:8d21604fe31d	13	* See the License for the specific language governing permissions and
rgrover1	528:8d21604fe31d	14	* limitations under the License.
rgrover1	528:8d21604fe31d	15	*/
rgrover1	528:8d21604fe31d	16
rgrover1	528:8d21604fe31d	17	#ifndef __BLE_H__
rgrover1	528:8d21604fe31d	18	#define __BLE_H__
rgrover1	528:8d21604fe31d	19
rgrover1	528:8d21604fe31d	20	#include "blecommon.h"
rgrover1	528:8d21604fe31d	21	#include "Gap.h"
rgrover1	528:8d21604fe31d	22	#include "GattServer.h"
rgrover1	528:8d21604fe31d	23	#include "GattClient.h"
rgrover1	528:8d21604fe31d	24	#include "BLEInstanceBase.h"
rgrover1	528:8d21604fe31d	25
rgrover1	528:8d21604fe31d	26	/**
rgrover1	528:8d21604fe31d	27	* The base class used to abstract away BLE capable radio transceivers or SOCs,
rgrover1	528:8d21604fe31d	28	* to enable this BLE API to work with any radio transparently.
rgrover1	528:8d21604fe31d	29	*/
rgrover1	528:8d21604fe31d	30	class BLE
rgrover1	528:8d21604fe31d	31	{
rgrover1	528:8d21604fe31d	32	public:
rgrover1	528:8d21604fe31d	33	/**
rgrover1	528:8d21604fe31d	34	* Initialize the BLE controller. This should be called before using
rgrover1	528:8d21604fe31d	35	* anything else in the BLE_API.
rgrover1	528:8d21604fe31d	36	*
rgrover1	528:8d21604fe31d	37	* init() hands control to the underlying BLE module to accomplish
rgrover1	528:8d21604fe31d	38	* initialization. This initialization may tacitly depend on other hardware
rgrover1	528:8d21604fe31d	39	* setup (such as clocks or power-modes) which happens early on during
rgrover1	528:8d21604fe31d	40	* system startup. It may not be safe to call init() from global static
rgrover1	528:8d21604fe31d	41	* context where ordering is compiler specific and can't be guaranteed--it
rgrover1	528:8d21604fe31d	42	* is safe to call BLE::init() from within main().
rgrover1	528:8d21604fe31d	43	*/
rgrover1	528:8d21604fe31d	44	ble_error_t init();
rgrover1	528:8d21604fe31d	45
rgrover1	537:00d5affbb2b2	46	/**
rgrover1	537:00d5affbb2b2	47	* Purge the BLE stack of GATT and GAP state. init() must be called
rgrover1	537:00d5affbb2b2	48	* afterwards to re-instate services and GAP state. This API offers a way to
rgrover1	537:00d5affbb2b2	49	* repopulate the GATT database with new services and characteristics.
rgrover1	537:00d5affbb2b2	50	*/
rgrover1	537:00d5affbb2b2	51	ble_error_t shutdown(void) {
rgrover1	537:00d5affbb2b2	52	clearAdvertisingPayload();
rgrover1	537:00d5affbb2b2	53	return transport->shutdown();
rgrover1	537:00d5affbb2b2	54	}
rgrover1	528:8d21604fe31d	55
rgrover1	528:8d21604fe31d	56	/**
rgrover1	537:00d5affbb2b2	57	* This call allows the application to get the BLE stack version information.
rgrover1	537:00d5affbb2b2	58	*
rgrover1	537:00d5affbb2b2	59	* @return A pointer to a const string representing the version.
rgrover1	537:00d5affbb2b2	60	* Note: The string is owned by the BLE_API.
rgrover1	528:8d21604fe31d	61	*/
rgrover1	537:00d5affbb2b2	62	const char *getVersion(void) {
rgrover1	537:00d5affbb2b2	63	return transport->getVersion();
rgrover1	537:00d5affbb2b2	64	}
rgrover1	528:8d21604fe31d	65
rgrover1	537:00d5affbb2b2	66	/*
rgrover1	537:00d5affbb2b2	67	* Accessors to GAP. Please refer to Gap.h. All GAP related functionality requires
rgrover1	537:00d5affbb2b2	68	* going through this accessor.
rgrover1	537:00d5affbb2b2	69	*/
rgrover1	529:ccfae9d8e56e	70	const Gap &gap() const {
rgrover1	529:ccfae9d8e56e	71	return transport->getGap();
rgrover1	529:ccfae9d8e56e	72	}
rgrover1	529:ccfae9d8e56e	73	Gap &gap() {
rgrover1	529:ccfae9d8e56e	74	return transport->getGap();
rgrover1	529:ccfae9d8e56e	75	}
rgrover1	529:ccfae9d8e56e	76
rgrover1	537:00d5affbb2b2	77	/**
rgrover1	537:00d5affbb2b2	78	* Yield control to the BLE stack or to other tasks waiting for events. This
rgrover1	537:00d5affbb2b2	79	* is a sleep function which will return when there is an application
rgrover1	537:00d5affbb2b2	80	* specific interrupt, but the MCU might wake up several times before
rgrover1	537:00d5affbb2b2	81	* returning (to service the stack). This is not always interchangeable with
rgrover1	537:00d5affbb2b2	82	* WFE().
rgrover1	537:00d5affbb2b2	83	*/
rgrover1	537:00d5affbb2b2	84	void waitForEvent(void) {
rgrover1	537:00d5affbb2b2	85	transport->waitForEvent();
rgrover1	537:00d5affbb2b2	86	}
rgrover1	537:00d5affbb2b2	87
rgrover1	537:00d5affbb2b2	88	/*
rgrover1	537:00d5affbb2b2	89	* Deprecation alert!
rgrover1	537:00d5affbb2b2	90	* All of the following are deprecated and may be dropped in a future
rgrover1	537:00d5affbb2b2	91	* release. Documentation should refer to alternative APIs.
rgrover1	537:00d5affbb2b2	92	*/
rgrover1	537:00d5affbb2b2	93
rgrover1	537:00d5affbb2b2	94	/* GAP specific APIs. */
rgrover1	531:bdcd44b03974	95	public:
rgrover1	528:8d21604fe31d	96	/**
rgrover1	528:8d21604fe31d	97	* Set the BTLE MAC address and type.
rgrover1	528:8d21604fe31d	98	* @return BLE_ERROR_NONE on success.
rgrover1	537:00d5affbb2b2	99	*
rgrover1	537:00d5affbb2b2	100	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	101	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	102	* ble.setAddress(...) should be replaced with
rgrover1	537:00d5affbb2b2	103	* ble.gap().setAddress(...).
rgrover1	528:8d21604fe31d	104	*/
rgrover1	537:00d5affbb2b2	105	ble_error_t setAddress(Gap::AddressType_t type, const Gap::Address_t address) {
rgrover1	537:00d5affbb2b2	106	return gap().setAddress(type, address);
rgrover1	537:00d5affbb2b2	107	}
rgrover1	528:8d21604fe31d	108
rgrover1	528:8d21604fe31d	109	/**
rgrover1	528:8d21604fe31d	110	* Fetch the BTLE MAC address and type.
rgrover1	528:8d21604fe31d	111	* @return BLE_ERROR_NONE on success.
rgrover1	537:00d5affbb2b2	112	*
rgrover1	537:00d5affbb2b2	113	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	114	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	115	* ble.getAddress(...) should be replaced with
rgrover1	537:00d5affbb2b2	116	* ble.gap().getAddress(...).
rgrover1	528:8d21604fe31d	117	*/
rgrover1	537:00d5affbb2b2	118	ble_error_t getAddress(Gap::AddressType_t *typeP, Gap::Address_t address) {
rgrover1	537:00d5affbb2b2	119	return gap().getAddress(typeP, address);
rgrover1	537:00d5affbb2b2	120	}
rgrover1	528:8d21604fe31d	121
rgrover1	528:8d21604fe31d	122	/**
rgrover1	537:00d5affbb2b2	123	* Set the GAP advertising mode to use for this device.
rgrover1	528:8d21604fe31d	124	*
rgrover1	537:00d5affbb2b2	125	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	126	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	127	* ble.setAdvertisingType(...) should be replaced with
rgrover1	537:00d5affbb2b2	128	* ble.gap().setAdvertisingType(...).
rgrover1	528:8d21604fe31d	129	*/
rgrover1	537:00d5affbb2b2	130	void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
rgrover1	537:00d5affbb2b2	131	gap().setAdvertisingType(advType);
rgrover1	537:00d5affbb2b2	132	}
rgrover1	528:8d21604fe31d	133
rgrover1	528:8d21604fe31d	134	/**
rgrover1	528:8d21604fe31d	135	* @param[in] interval
rgrover1	528:8d21604fe31d	136	* Advertising interval in units of milliseconds. Advertising
rgrover1	528:8d21604fe31d	137	* is disabled if interval is 0. If interval is smaller than
rgrover1	528:8d21604fe31d	138	* the minimum supported value, then the minimum supported
rgrover1	537:00d5affbb2b2	139	* value is used instead. This minimum value can be discovered
rgrover1	537:00d5affbb2b2	140	* using getMinAdvertisingInterval().
rgrover1	528:8d21604fe31d	141	*
rgrover1	537:00d5affbb2b2	142	* This field must be set to 0 if connectionMode is equal
rgrover1	537:00d5affbb2b2	143	* to ADV_CONNECTABLE_DIRECTED.
rgrover1	528:8d21604fe31d	144	*
rgrover1	537:00d5affbb2b2	145	* @note: Decreasing this value will allow central devices to detect a
rgrover1	537:00d5affbb2b2	146	* peripheral faster at the expense of more power being used by the radio
rgrover1	537:00d5affbb2b2	147	* due to the higher data transmit rate.
rgrover1	528:8d21604fe31d	148	*
rgrover1	537:00d5affbb2b2	149	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	150	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	151	* ble.setAdvertisingInterval(...) should be replaced with
rgrover1	537:00d5affbb2b2	152	* ble.gap().setAdvertisingInterval(...).
rgrover1	528:8d21604fe31d	153	*
rgrover1	537:00d5affbb2b2	154	* @note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1	528:8d21604fe31d	155	* 'interval' argument. That required an explicit conversion from
rgrover1	528:8d21604fe31d	156	* milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1	528:8d21604fe31d	157	* no longer required as the new units are milliseconds. Any application
rgrover1	528:8d21604fe31d	158	* code depending on the old semantics would need to be updated accordingly.
rgrover1	528:8d21604fe31d	159	*/
rgrover1	537:00d5affbb2b2	160	void setAdvertisingInterval(uint16_t interval) {
rgrover1	537:00d5affbb2b2	161	gap().setAdvertisingInterval(interval);
rgrover1	537:00d5affbb2b2	162	}
rgrover1	528:8d21604fe31d	163
rgrover1	528:8d21604fe31d	164	/**
rgrover1	528:8d21604fe31d	165	* @return Minimum Advertising interval in milliseconds.
rgrover1	537:00d5affbb2b2	166	*
rgrover1	537:00d5affbb2b2	167	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	168	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	169	* ble.getMinAdvertisingInterval(...) should be replaced with
rgrover1	537:00d5affbb2b2	170	* ble.gap().getMinAdvertisingInterval(...).
rgrover1	528:8d21604fe31d	171	*/
rgrover1	537:00d5affbb2b2	172	uint16_t getMinAdvertisingInterval(void) const {
rgrover1	537:00d5affbb2b2	173	return gap().getMinAdvertisingInterval();
rgrover1	537:00d5affbb2b2	174	}
rgrover1	537:00d5affbb2b2	175
rgrover1	528:8d21604fe31d	176	/**
rgrover1	537:00d5affbb2b2	177	* @return Minimum Advertising interval in milliseconds for non-connectible mode.
rgrover1	537:00d5affbb2b2	178	*
rgrover1	537:00d5affbb2b2	179	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	180	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	181	* ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
rgrover1	537:00d5affbb2b2	182	* ble.gap().getMinNonConnectableAdvertisingInterval(...).
rgrover1	528:8d21604fe31d	183	*/
rgrover1	537:00d5affbb2b2	184	uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1	537:00d5affbb2b2	185	return gap().getMinNonConnectableAdvertisingInterval();
rgrover1	537:00d5affbb2b2	186	}
rgrover1	537:00d5affbb2b2	187
rgrover1	528:8d21604fe31d	188	/**
rgrover1	528:8d21604fe31d	189	* @return Maximum Advertising interval in milliseconds.
rgrover1	537:00d5affbb2b2	190	*
rgrover1	537:00d5affbb2b2	191	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	192	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	193	* ble.getMaxAdvertisingInterval(...) should be replaced with
rgrover1	537:00d5affbb2b2	194	* ble.gap().getMaxAdvertisingInterval(...).
rgrover1	528:8d21604fe31d	195	*/
rgrover1	537:00d5affbb2b2	196	uint16_t getMaxAdvertisingInterval(void) const {
rgrover1	537:00d5affbb2b2	197	return gap().getMaxAdvertisingInterval();
rgrover1	537:00d5affbb2b2	198	}
rgrover1	528:8d21604fe31d	199
rgrover1	528:8d21604fe31d	200	/**
rgrover1	528:8d21604fe31d	201	* @param[in] timeout
rgrover1	537:00d5affbb2b2	202	* Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1	537:00d5affbb2b2	203	* and 16383). Use 0 to disable the advertising timeout.
rgrover1	537:00d5affbb2b2	204	*
rgrover1	537:00d5affbb2b2	205	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	206	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	207	* ble.setAdvertisingTimeout(...) should be replaced with
rgrover1	537:00d5affbb2b2	208	* ble.gap().setAdvertisingTimeout(...).
rgrover1	528:8d21604fe31d	209	*/
rgrover1	537:00d5affbb2b2	210	void setAdvertisingTimeout(uint16_t timeout) {
rgrover1	537:00d5affbb2b2	211	gap().setAdvertisingTimeout(timeout);
rgrover1	537:00d5affbb2b2	212	}
rgrover1	528:8d21604fe31d	213
rgrover1	528:8d21604fe31d	214	/**
rgrover1	537:00d5affbb2b2	215	* Setup a particular, user-constructed set of advertisement parameters for
rgrover1	537:00d5affbb2b2	216	* the underlying stack. It would be uncommon for this API to be used
rgrover1	537:00d5affbb2b2	217	* directly; there are other APIs to tweak advertisement parameters
rgrover1	537:00d5affbb2b2	218	* individually (see above).
rgrover1	537:00d5affbb2b2	219	*
rgrover1	537:00d5affbb2b2	220	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	221	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	222	* ble.setAdvertisingParams(...) should be replaced with
rgrover1	537:00d5affbb2b2	223	* ble.gap().setAdvertisingParams(...).
rgrover1	528:8d21604fe31d	224	*/
rgrover1	537:00d5affbb2b2	225	void setAdvertisingParams(const GapAdvertisingParams &advParams) {
rgrover1	537:00d5affbb2b2	226	gap().setAdvertisingParams(advParams);
rgrover1	537:00d5affbb2b2	227	}
rgrover1	528:8d21604fe31d	228
rgrover1	528:8d21604fe31d	229	/**
rgrover1	528:8d21604fe31d	230	* @return Read back advertising parameters. Useful for storing and
rgrover1	528:8d21604fe31d	231	* restoring parameters rapidly.
rgrover1	537:00d5affbb2b2	232	*
rgrover1	537:00d5affbb2b2	233	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	234	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	235	* ble.getAdvertisingParams(...) should be replaced with
rgrover1	537:00d5affbb2b2	236	* ble.gap().getAdvertisingParams(...).
rgrover1	528:8d21604fe31d	237	*/
rgrover1	537:00d5affbb2b2	238	const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1	537:00d5affbb2b2	239	return gap().getAdvertisingParams();
rgrover1	537:00d5affbb2b2	240	}
rgrover1	528:8d21604fe31d	241
rgrover1	528:8d21604fe31d	242	/**
rgrover1	528:8d21604fe31d	243	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	528:8d21604fe31d	244	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	528:8d21604fe31d	245	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	528:8d21604fe31d	246	* small.
rgrover1	528:8d21604fe31d	247	*
rgrover1	537:00d5affbb2b2	248	* @param[in] flags
rgrover1	537:00d5affbb2b2	249	* The flags to be added. Please refer to
rgrover1	537:00d5affbb2b2	250	* GapAdvertisingData::Flags for valid flags. Multiple
rgrover1	537:00d5affbb2b2	251	* flags may be specified in combination.
rgrover1	537:00d5affbb2b2	252	*
rgrover1	537:00d5affbb2b2	253	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	254	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	255	* ble.accumulateAdvertisingPayload(flags) should be replaced with
rgrover1	537:00d5affbb2b2	256	* ble.gap().accumulateAdvertisingPayload(flags).
rgrover1	528:8d21604fe31d	257	*/
rgrover1	537:00d5affbb2b2	258	ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1	537:00d5affbb2b2	259	return gap().accumulateAdvertisingPayload(flags);
rgrover1	537:00d5affbb2b2	260	}
rgrover1	528:8d21604fe31d	261
rgrover1	528:8d21604fe31d	262	/**
rgrover1	528:8d21604fe31d	263	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	528:8d21604fe31d	264	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	528:8d21604fe31d	265	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	528:8d21604fe31d	266	* small.
rgrover1	528:8d21604fe31d	267	*
rgrover1	537:00d5affbb2b2	268	* @param[in] app
rgrover1	537:00d5affbb2b2	269	* The appearance of the peripheral.
rgrover1	537:00d5affbb2b2	270	*
rgrover1	537:00d5affbb2b2	271	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	272	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	273	* ble.accumulateAdvertisingPayload(appearance) should be replaced with
rgrover1	537:00d5affbb2b2	274	* ble.gap().accumulateAdvertisingPayload(appearance).
rgrover1	528:8d21604fe31d	275	*/
rgrover1	537:00d5affbb2b2	276	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1	537:00d5affbb2b2	277	return gap().accumulateAdvertisingPayload(app);
rgrover1	537:00d5affbb2b2	278	}
rgrover1	528:8d21604fe31d	279
rgrover1	528:8d21604fe31d	280	/**
rgrover1	528:8d21604fe31d	281	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	528:8d21604fe31d	282	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	528:8d21604fe31d	283	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	528:8d21604fe31d	284	* small.
rgrover1	528:8d21604fe31d	285	*
rgrover1	537:00d5affbb2b2	286	* @param[in] app
rgrover1	537:00d5affbb2b2	287	* The max transmit power to be used by the controller. This
rgrover1	537:00d5affbb2b2	288	* is only a hint.
rgrover1	537:00d5affbb2b2	289	*
rgrover1	537:00d5affbb2b2	290	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	291	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	292	* ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
rgrover1	537:00d5affbb2b2	293	* ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
rgrover1	528:8d21604fe31d	294	*/
rgrover1	537:00d5affbb2b2	295	ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1	537:00d5affbb2b2	296	return gap().accumulateAdvertisingPayloadTxPower(power);
rgrover1	537:00d5affbb2b2	297	}
rgrover1	528:8d21604fe31d	298
rgrover1	528:8d21604fe31d	299	/**
rgrover1	528:8d21604fe31d	300	* Accumulate a variable length byte-stream as an AD structure in the
rgrover1	528:8d21604fe31d	301	* advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1	528:8d21604fe31d	302	* The SCAN_RESPONSE message may be used as an additional 31 bytes if the
rgrover1	528:8d21604fe31d	303	* advertising payload proves to be too small.
rgrover1	528:8d21604fe31d	304	*
rgrover1	528:8d21604fe31d	305	* @param type The type which describes the variable length data.
rgrover1	528:8d21604fe31d	306	* @param data data bytes.
rgrover1	528:8d21604fe31d	307	* @param len length of data.
rgrover1	537:00d5affbb2b2	308	*
rgrover1	537:00d5affbb2b2	309	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	310	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	311	* ble.accumulateAdvertisingPayload(...) should be replaced with
rgrover1	537:00d5affbb2b2	312	* ble.gap().accumulateAdvertisingPayload(...).
rgrover1	528:8d21604fe31d	313	*/
rgrover1	537:00d5affbb2b2	314	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1	537:00d5affbb2b2	315	return gap().accumulateAdvertisingPayload(type, data, len);
rgrover1	537:00d5affbb2b2	316	}
rgrover1	537:00d5affbb2b2	317
rgrover1	537:00d5affbb2b2	318	/**
rgrover1	537:00d5affbb2b2	319	* Setup a particular, user-constructed advertisement payload for the
rgrover1	537:00d5affbb2b2	320	* underlying stack. It would be uncommon for this API to be used directly;
rgrover1	537:00d5affbb2b2	321	* there are other APIs to build an advertisement payload (see above).
rgrover1	537:00d5affbb2b2	322	*
rgrover1	537:00d5affbb2b2	323	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	324	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	325	* ble.setAdvertisingData(...) should be replaced with
rgrover1	537:00d5affbb2b2	326	* ble.gap().setAdvertisingPayload(...).
rgrover1	537:00d5affbb2b2	327	*/
rgrover1	537:00d5affbb2b2	328	ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
rgrover1	537:00d5affbb2b2	329	return gap().setAdvertisingPayload(advData);
rgrover1	537:00d5affbb2b2	330	}
rgrover1	537:00d5affbb2b2	331
rgrover1	537:00d5affbb2b2	332	/**
rgrover1	537:00d5affbb2b2	333	* @return Read back advertising data. Useful for storing and
rgrover1	537:00d5affbb2b2	334	* restoring payload.
rgrover1	537:00d5affbb2b2	335	*
rgrover1	537:00d5affbb2b2	336	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	337	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	338	* ble.getAdvertisingData(...) should be replaced with
rgrover1	537:00d5affbb2b2	339	* ble.gap().getAdvertisingPayload()(...).
rgrover1	537:00d5affbb2b2	340	*/
rgrover1	537:00d5affbb2b2	341	const GapAdvertisingData &getAdvertisingData(void) const {
rgrover1	537:00d5affbb2b2	342	return gap().getAdvertisingPayload();
rgrover1	537:00d5affbb2b2	343	}
rgrover1	537:00d5affbb2b2	344
rgrover1	537:00d5affbb2b2	345	/**
rgrover1	537:00d5affbb2b2	346	* Reset any advertising payload prepared from prior calls to
rgrover1	537:00d5affbb2b2	347	* accumulateAdvertisingPayload(). This automatically propagates the re-
rgrover1	537:00d5affbb2b2	348	* initialized adv payload to the underlying stack.
rgrover1	537:00d5affbb2b2	349	*
rgrover1	537:00d5affbb2b2	350	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	351	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	352	* ble.clearAdvertisingPayload(...) should be replaced with
rgrover1	537:00d5affbb2b2	353	* ble.gap().clearAdvertisingPayload(...).
rgrover1	537:00d5affbb2b2	354	*/
rgrover1	537:00d5affbb2b2	355	void clearAdvertisingPayload(void) {
rgrover1	537:00d5affbb2b2	356	gap().clearAdvertisingPayload();
rgrover1	537:00d5affbb2b2	357	}
rgrover1	537:00d5affbb2b2	358
rgrover1	537:00d5affbb2b2	359	/**
rgrover1	537:00d5affbb2b2	360	* This API is deprecated and resolves to a no-operation. It is left here
rgrover1	537:00d5affbb2b2	361	* to allow older code to compile. Please avoid using this API in new code.
rgrover1	537:00d5affbb2b2	362	* This API will be dropped in a future release.
rgrover1	537:00d5affbb2b2	363	*
rgrover1	537:00d5affbb2b2	364	* Formerly, it would be used to dynamically reset the accumulated advertising
rgrover1	537:00d5affbb2b2	365	* payload and scanResponse; to do this, the application would clear and re-
rgrover1	537:00d5affbb2b2	366	* accumulate a new advertising payload (and scanResponse) before using this
rgrover1	537:00d5affbb2b2	367	* API. Updates to the underlying advertisement payload now happen
rgrover1	537:00d5affbb2b2	368	* implicitly.
rgrover1	537:00d5affbb2b2	369	*/
rgrover1	537:00d5affbb2b2	370	ble_error_t setAdvertisingPayload(void) {
rgrover1	537:00d5affbb2b2	371	return BLE_ERROR_NONE;
rgrover1	537:00d5affbb2b2	372	}
rgrover1	528:8d21604fe31d	373
rgrover1	528:8d21604fe31d	374	/**
rgrover1	528:8d21604fe31d	375	* Accumulate a variable length byte-stream as an AD structure in the
rgrover1	528:8d21604fe31d	376	* scanResponse payload.
rgrover1	528:8d21604fe31d	377	*
rgrover1	537:00d5affbb2b2	378	* @param[in] type The type which describes the variable length data.
rgrover1	537:00d5affbb2b2	379	* @param[in] data data bytes.
rgrover1	537:00d5affbb2b2	380	* @param[in] len length of data.
rgrover1	537:00d5affbb2b2	381	*
rgrover1	537:00d5affbb2b2	382	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	383	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	384	* ble.accumulateScanResponse(...) should be replaced with
rgrover1	537:00d5affbb2b2	385	* ble.gap().accumulateScanResponse(...).
rgrover1	528:8d21604fe31d	386	*/
rgrover1	537:00d5affbb2b2	387	ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1	537:00d5affbb2b2	388	return gap().accumulateScanResponse(type, data, len);
rgrover1	537:00d5affbb2b2	389	}
rgrover1	528:8d21604fe31d	390
rgrover1	528:8d21604fe31d	391	/**
rgrover1	528:8d21604fe31d	392	* Reset any scan response prepared from prior calls to
rgrover1	528:8d21604fe31d	393	* accumulateScanResponse().
rgrover1	528:8d21604fe31d	394	*
rgrover1	537:00d5affbb2b2	395	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	396	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	397	* ble.clearScanResponse(...) should be replaced with
rgrover1	537:00d5affbb2b2	398	* ble.gap().clearScanResponse(...).
rgrover1	528:8d21604fe31d	399	*/
rgrover1	537:00d5affbb2b2	400	void clearScanResponse(void) {
rgrover1	537:00d5affbb2b2	401	gap().clearScanResponse();
rgrover1	537:00d5affbb2b2	402	}
rgrover1	528:8d21604fe31d	403
rgrover1	528:8d21604fe31d	404	/**
rgrover1	537:00d5affbb2b2	405	* Start advertising.
rgrover1	537:00d5affbb2b2	406	*
rgrover1	537:00d5affbb2b2	407	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	408	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	409	* ble.startAdvertising(...) should be replaced with
rgrover1	537:00d5affbb2b2	410	* ble.gap().startAdvertising(...).
rgrover1	528:8d21604fe31d	411	*/
rgrover1	537:00d5affbb2b2	412	ble_error_t startAdvertising(void) {
rgrover1	537:00d5affbb2b2	413	/* HACK ALERT! the following bit with initializeGATTDatabase() is additional to
rgrover1	537:00d5affbb2b2	414	* gap().startAdvertising(). This was put in place to get some stacks to
rgrover1	537:00d5affbb2b2	415	* work--like CSR. We need to reach a point where this shouldn't be
rgrover1	537:00d5affbb2b2	416	* necessary. */
rgrover1	537:00d5affbb2b2	417	ble_error_t rc;
rgrover1	537:00d5affbb2b2	418	if ((rc = transport->getGattServer().initializeGATTDatabase()) != BLE_ERROR_NONE) {
rgrover1	537:00d5affbb2b2	419	return rc;
rgrover1	537:00d5affbb2b2	420	}
rgrover1	537:00d5affbb2b2	421
rgrover1	537:00d5affbb2b2	422	return gap().startAdvertising();
rgrover1	537:00d5affbb2b2	423	}
rgrover1	528:8d21604fe31d	424
rgrover1	528:8d21604fe31d	425	/**
rgrover1	537:00d5affbb2b2	426	* Stop advertising.
rgrover1	537:00d5affbb2b2	427	*
rgrover1	537:00d5affbb2b2	428	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	429	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	430	* ble.stopAdvertising(...) should be replaced with
rgrover1	537:00d5affbb2b2	431	* ble.gap().stopAdvertising(...).
rgrover1	528:8d21604fe31d	432	*/
rgrover1	537:00d5affbb2b2	433	ble_error_t stopAdvertising(void) {
rgrover1	537:00d5affbb2b2	434	return gap().stopAdvertising();
rgrover1	537:00d5affbb2b2	435	}
rgrover1	528:8d21604fe31d	436
rgrover1	528:8d21604fe31d	437	/**
rgrover1	528:8d21604fe31d	438	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	537:00d5affbb2b2	439	* @param[in] interval
rgrover1	537:00d5affbb2b2	440	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	537:00d5affbb2b2	441	* @param[in] window
rgrover1	537:00d5affbb2b2	442	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	537:00d5affbb2b2	443	* @param[in] timeout
rgrover1	537:00d5affbb2b2	444	* Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1	537:00d5affbb2b2	445	* @param[in] activeScanning
rgrover1	537:00d5affbb2b2	446	* Set to True if active-scanning is required. This is used to fetch the
rgrover1	537:00d5affbb2b2	447	* scan response from a peer if possible.
rgrover1	528:8d21604fe31d	448	*
rgrover1	528:8d21604fe31d	449	* The scanning window divided by the interval determines the duty cycle for
rgrover1	528:8d21604fe31d	450	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	528:8d21604fe31d	451	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	528:8d21604fe31d	452	* to have the interval and window set to the same value. In this case,
rgrover1	528:8d21604fe31d	453	* scanning is continuous, with a change of scanning frequency once every
rgrover1	528:8d21604fe31d	454	* interval.
rgrover1	528:8d21604fe31d	455	*
rgrover1	528:8d21604fe31d	456	* Once the scanning parameters have been configured, scanning can be
rgrover1	528:8d21604fe31d	457	* enabled by using startScan().
rgrover1	528:8d21604fe31d	458	*
rgrover1	528:8d21604fe31d	459	* @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1	537:00d5affbb2b2	460	*
rgrover1	537:00d5affbb2b2	461	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	462	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	463	* ble.setScanParams(...) should be replaced with
rgrover1	537:00d5affbb2b2	464	* ble.gap().setScanParams(...).
rgrover1	528:8d21604fe31d	465	*/
rgrover1	528:8d21604fe31d	466	ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1	528:8d21604fe31d	467	uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1	528:8d21604fe31d	468	uint16_t timeout = 0,
rgrover1	537:00d5affbb2b2	469	bool activeScanning = false) {
rgrover1	537:00d5affbb2b2	470	return gap().setScanParams(interval, window, timeout, activeScanning);
rgrover1	537:00d5affbb2b2	471	}
rgrover1	537:00d5affbb2b2	472
rgrover1	537:00d5affbb2b2	473	/**
rgrover1	537:00d5affbb2b2	474	* Setup the scanInterval parameter for GAP scanning--i.e. observer mode.
rgrover1	537:00d5affbb2b2	475	* @param[in] interval
rgrover1	537:00d5affbb2b2	476	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	537:00d5affbb2b2	477	*
rgrover1	537:00d5affbb2b2	478	* The scanning window divided by the interval determines the duty cycle for
rgrover1	537:00d5affbb2b2	479	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	537:00d5affbb2b2	480	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	537:00d5affbb2b2	481	* to have the interval and window set to the same value. In this case,
rgrover1	537:00d5affbb2b2	482	* scanning is continuous, with a change of scanning frequency once every
rgrover1	537:00d5affbb2b2	483	* interval.
rgrover1	537:00d5affbb2b2	484	*
rgrover1	537:00d5affbb2b2	485	* Once the scanning parameters have been configured, scanning can be
rgrover1	537:00d5affbb2b2	486	* enabled by using startScan().
rgrover1	537:00d5affbb2b2	487	*
rgrover1	537:00d5affbb2b2	488	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	489	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	490	* ble.setScanInterval(interval) should be replaced with
rgrover1	537:00d5affbb2b2	491	* ble.gap().setScanInterval(interval).
rgrover1	537:00d5affbb2b2	492	*/
rgrover1	537:00d5affbb2b2	493	ble_error_t setScanInterval(uint16_t interval) {
rgrover1	537:00d5affbb2b2	494	return gap().setScanInterval(interval);
rgrover1	537:00d5affbb2b2	495	}
rgrover1	537:00d5affbb2b2	496
rgrover1	537:00d5affbb2b2	497	/**
rgrover1	537:00d5affbb2b2	498	* Setup the scanWindow parameter for GAP scanning--i.e. observer mode.
rgrover1	537:00d5affbb2b2	499	* @param[in] window
rgrover1	537:00d5affbb2b2	500	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	537:00d5affbb2b2	501	*
rgrover1	537:00d5affbb2b2	502	* The scanning window divided by the interval determines the duty cycle for
rgrover1	537:00d5affbb2b2	503	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	537:00d5affbb2b2	504	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	537:00d5affbb2b2	505	* to have the interval and window set to the same value. In this case,
rgrover1	537:00d5affbb2b2	506	* scanning is continuous, with a change of scanning frequency once every
rgrover1	537:00d5affbb2b2	507	* interval.
rgrover1	537:00d5affbb2b2	508	*
rgrover1	537:00d5affbb2b2	509	* Once the scanning parameters have been configured, scanning can be
rgrover1	537:00d5affbb2b2	510	* enabled by using startScan().
rgrover1	537:00d5affbb2b2	511	*
rgrover1	537:00d5affbb2b2	512	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	513	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	514	* ble.setScanWindow(window) should be replaced with
rgrover1	537:00d5affbb2b2	515	* ble.gap().setScanWindow(window).
rgrover1	537:00d5affbb2b2	516	*/
rgrover1	537:00d5affbb2b2	517	ble_error_t setScanWindow(uint16_t window) {
rgrover1	537:00d5affbb2b2	518	return gap().setScanWindow(window);
rgrover1	537:00d5affbb2b2	519	}
rgrover1	528:8d21604fe31d	520
rgrover1	528:8d21604fe31d	521	/**
rgrover1	537:00d5affbb2b2	522	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	537:00d5affbb2b2	523	* @param[in] timeout
rgrover1	537:00d5affbb2b2	524	* Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1	537:00d5affbb2b2	525	*
rgrover1	537:00d5affbb2b2	526	* The scanning window divided by the interval determines the duty cycle for
rgrover1	537:00d5affbb2b2	527	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	537:00d5affbb2b2	528	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	537:00d5affbb2b2	529	* to have the interval and window set to the same value. In this case,
rgrover1	537:00d5affbb2b2	530	* scanning is continuous, with a change of scanning frequency once every
rgrover1	537:00d5affbb2b2	531	* interval.
rgrover1	528:8d21604fe31d	532	*
rgrover1	537:00d5affbb2b2	533	* Once the scanning parameters have been configured, scanning can be
rgrover1	537:00d5affbb2b2	534	* enabled by using startScan().
rgrover1	537:00d5affbb2b2	535	*
rgrover1	537:00d5affbb2b2	536	* @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1	537:00d5affbb2b2	537	*
rgrover1	537:00d5affbb2b2	538	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	539	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	540	* ble.setScanTimeout(...) should be replaced with
rgrover1	537:00d5affbb2b2	541	* ble.gap().setScanTimeout(...).
rgrover1	528:8d21604fe31d	542	*/
rgrover1	537:00d5affbb2b2	543	ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1	537:00d5affbb2b2	544	return gap().setScanTimeout(timeout);
rgrover1	537:00d5affbb2b2	545	}
rgrover1	528:8d21604fe31d	546
rgrover1	528:8d21604fe31d	547	/**
rgrover1	537:00d5affbb2b2	548	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	537:00d5affbb2b2	549	* @param[in] activeScanning
rgrover1	537:00d5affbb2b2	550	* Set to True if active-scanning is required. This is used to fetch the
rgrover1	537:00d5affbb2b2	551	* scan response from a peer if possible.
rgrover1	537:00d5affbb2b2	552	*
rgrover1	537:00d5affbb2b2	553	* Once the scanning parameters have been configured, scanning can be
rgrover1	537:00d5affbb2b2	554	* enabled by using startScan().
rgrover1	537:00d5affbb2b2	555	*
rgrover1	537:00d5affbb2b2	556	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	557	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	558	* ble.setActiveScan(...) should be replaced with
rgrover1	537:00d5affbb2b2	559	* ble.gap().setActiveScanning(...).
rgrover1	537:00d5affbb2b2	560	*/
rgrover1	537:00d5affbb2b2	561	void setActiveScan(bool activeScanning) {
rgrover1	537:00d5affbb2b2	562	gap().setActiveScanning(activeScanning);
rgrover1	537:00d5affbb2b2	563	}
rgrover1	537:00d5affbb2b2	564
rgrover1	537:00d5affbb2b2	565	/**
rgrover1	537:00d5affbb2b2	566	* Start scanning (Observer Procedure) based on the parameters currently in
rgrover1	537:00d5affbb2b2	567	* effect.
rgrover1	528:8d21604fe31d	568	*
rgrover1	537:00d5affbb2b2	569	* @param[in] callback
rgrover1	537:00d5affbb2b2	570	* The application specific callback to be invoked upon
rgrover1	537:00d5affbb2b2	571	* receiving every advertisement report. This can be passed in
rgrover1	537:00d5affbb2b2	572	* as NULL, in which case scanning may not be enabled at all.
rgrover1	537:00d5affbb2b2	573	*
rgrover1	537:00d5affbb2b2	574	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	575	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	576	* ble.startScan(callback) should be replaced with
rgrover1	537:00d5affbb2b2	577	* ble.gap().startScan(callback).
rgrover1	537:00d5affbb2b2	578	*/
rgrover1	537:00d5affbb2b2	579	ble_error_t startScan(void (callback)(const Gap::AdvertisementCallbackParams_t params)) {
rgrover1	537:00d5affbb2b2	580	return gap().startScan(callback);
rgrover1	537:00d5affbb2b2	581	}
rgrover1	537:00d5affbb2b2	582
rgrover1	537:00d5affbb2b2	583	/**
rgrover1	537:00d5affbb2b2	584	* Same as above, but this takes an (object, method) pair for a callback.
rgrover1	537:00d5affbb2b2	585	*
rgrover1	537:00d5affbb2b2	586	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	587	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	588	* ble.startScan(callback) should be replaced with
rgrover1	537:00d5affbb2b2	589	* ble.gap().startScan(object, callback).
rgrover1	528:8d21604fe31d	590	*/
rgrover1	528:8d21604fe31d	591	template<typename T>
rgrover1	528:8d21604fe31d	592	ble_error_t startScan(T object, void (T::memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
rgrover1	528:8d21604fe31d	593
rgrover1	528:8d21604fe31d	594	/**
rgrover1	528:8d21604fe31d	595	* Stop scanning. The current scanning parameters remain in effect.
rgrover1	528:8d21604fe31d	596	*
rgrover1	528:8d21604fe31d	597	* @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1	537:00d5affbb2b2	598	*
rgrover1	537:00d5affbb2b2	599	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	600	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	601	* ble.stopScan() should be replaced with
rgrover1	537:00d5affbb2b2	602	* ble.gap().stopScan().
rgrover1	528:8d21604fe31d	603	*/
rgrover1	537:00d5affbb2b2	604	ble_error_t stopScan(void) {
rgrover1	537:00d5affbb2b2	605	return gap().stopScan();
rgrover1	537:00d5affbb2b2	606	}
rgrover1	528:8d21604fe31d	607
rgrover1	528:8d21604fe31d	608	/**
rgrover1	528:8d21604fe31d	609	* Create a connection (GAP Link Establishment).
rgrover1	528:8d21604fe31d	610	* @param peerAddr
rgrover1	528:8d21604fe31d	611	* 48-bit address, LSB format.
rgrover1	528:8d21604fe31d	612	* @param peerAddrType
rgrover1	528:8d21604fe31d	613	* Address type of the peer.
rgrover1	528:8d21604fe31d	614	* @param connectionParams
rgrover1	528:8d21604fe31d	615	* Connection parameters.
rgrover1	528:8d21604fe31d	616	* @param scanParams
rgrover1	528:8d21604fe31d	617	* Paramters to be used while scanning for the peer.
rgrover1	528:8d21604fe31d	618	* @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1	528:8d21604fe31d	619	* successfully. The onConnection callback (if set) will be invoked upon
rgrover1	528:8d21604fe31d	620	* a connection event.
rgrover1	537:00d5affbb2b2	621	*
rgrover1	537:00d5affbb2b2	622	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	623	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	624	* ble.connect(...) should be replaced with
rgrover1	537:00d5affbb2b2	625	* ble.gap().connect(...).
rgrover1	528:8d21604fe31d	626	*/
rgrover1	528:8d21604fe31d	627	ble_error_t connect(const Gap::Address_t peerAddr,
rgrover1	528:8d21604fe31d	628	Gap::AddressType_t peerAddrType = Gap::ADDR_TYPE_RANDOM_STATIC,
rgrover1	528:8d21604fe31d	629	const Gap::ConnectionParams_t *connectionParams = NULL,
rgrover1	537:00d5affbb2b2	630	const GapScanningParams *scanParams = NULL) {
rgrover1	537:00d5affbb2b2	631	return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
rgrover1	537:00d5affbb2b2	632	}
rgrover1	528:8d21604fe31d	633
rgrover1	528:8d21604fe31d	634	/**
rgrover1	528:8d21604fe31d	635	* This call initiates the disconnection procedure, and its completion will
rgrover1	528:8d21604fe31d	636	* be communicated to the application with an invocation of the
rgrover1	528:8d21604fe31d	637	* onDisconnection callback.
rgrover1	528:8d21604fe31d	638	*
rgrover1	528:8d21604fe31d	639	* @param reason
rgrover1	528:8d21604fe31d	640	* The reason for disconnection to be sent back to the peer.
rgrover1	537:00d5affbb2b2	641	*
rgrover1	537:00d5affbb2b2	642	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	643	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	644	* ble.disconnect(reason) should be replaced with
rgrover1	537:00d5affbb2b2	645	* ble.gap().disconnect(reason).
rgrover1	528:8d21604fe31d	646	*/
rgrover1	537:00d5affbb2b2	647	ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
rgrover1	537:00d5affbb2b2	648	return gap().disconnect(reason);
rgrover1	537:00d5affbb2b2	649	}
rgrover1	537:00d5affbb2b2	650
rgrover1	537:00d5affbb2b2	651	/**
rgrover1	537:00d5affbb2b2	652	* Returns the current GAP state of the device using a bitmask which
rgrover1	537:00d5affbb2b2	653	* describes whether the device is advertising and/or connected.
rgrover1	537:00d5affbb2b2	654	*
rgrover1	537:00d5affbb2b2	655	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	656	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	657	* ble.getGapState() should be replaced with
rgrover1	537:00d5affbb2b2	658	* ble.gap().getState().
rgrover1	537:00d5affbb2b2	659	*/
rgrover1	537:00d5affbb2b2	660	Gap::GapState_t getGapState(void) const {
rgrover1	537:00d5affbb2b2	661	return gap().getState();
rgrover1	537:00d5affbb2b2	662	}
rgrover1	537:00d5affbb2b2	663
rgrover1	537:00d5affbb2b2	664	/**
rgrover1	537:00d5affbb2b2	665	* Get the GAP peripheral preferred connection parameters. These are the
rgrover1	537:00d5affbb2b2	666	* defaults that the peripheral would like to have in a connection. The
rgrover1	537:00d5affbb2b2	667	* choice of the connection parameters is eventually up to the central.
rgrover1	537:00d5affbb2b2	668	*
rgrover1	537:00d5affbb2b2	669	* @param[out] params
rgrover1	537:00d5affbb2b2	670	* The structure where the parameters will be stored. Memory
rgrover1	537:00d5affbb2b2	671	* for this is owned by the caller.
rgrover1	537:00d5affbb2b2	672	*
rgrover1	537:00d5affbb2b2	673	* @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1	537:00d5affbb2b2	674	* the given structure pointed to by params.
rgrover1	537:00d5affbb2b2	675	*
rgrover1	537:00d5affbb2b2	676	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	677	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	678	* ble.getPreferredConnectionParams() should be replaced with
rgrover1	537:00d5affbb2b2	679	* ble.gap().getPreferredConnectionParams().
rgrover1	537:00d5affbb2b2	680	*/
rgrover1	537:00d5affbb2b2	681	ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
rgrover1	537:00d5affbb2b2	682	return gap().getPreferredConnectionParams(params);
rgrover1	537:00d5affbb2b2	683	}
rgrover1	537:00d5affbb2b2	684
rgrover1	537:00d5affbb2b2	685	/**
rgrover1	537:00d5affbb2b2	686	* Set the GAP peripheral preferred connection parameters. These are the
rgrover1	537:00d5affbb2b2	687	* defaults that the peripheral would like to have in a connection. The
rgrover1	537:00d5affbb2b2	688	* choice of the connection parameters is eventually up to the central.
rgrover1	537:00d5affbb2b2	689	*
rgrover1	537:00d5affbb2b2	690	* @param[in] params
rgrover1	537:00d5affbb2b2	691	* The structure containing the desired parameters.
rgrover1	537:00d5affbb2b2	692	*
rgrover1	537:00d5affbb2b2	693	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	694	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	695	* ble.setPreferredConnectionParams() should be replaced with
rgrover1	537:00d5affbb2b2	696	* ble.gap().setPreferredConnectionParams().
rgrover1	537:00d5affbb2b2	697	*/
rgrover1	537:00d5affbb2b2	698	ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
rgrover1	537:00d5affbb2b2	699	return gap().setPreferredConnectionParams(params);
rgrover1	537:00d5affbb2b2	700	}
rgrover1	537:00d5affbb2b2	701
rgrover1	537:00d5affbb2b2	702	/**
rgrover1	537:00d5affbb2b2	703	* Update connection parameters while in the peripheral role.
rgrover1	537:00d5affbb2b2	704	* @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
rgrover1	537:00d5affbb2b2	705	* the central to perform the procedure.
rgrover1	537:00d5affbb2b2	706	* @param[in] handle
rgrover1	537:00d5affbb2b2	707	* Connection Handle
rgrover1	537:00d5affbb2b2	708	* @param[in] params
rgrover1	537:00d5affbb2b2	709	* Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1	537:00d5affbb2b2	710	* the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1	537:00d5affbb2b2	711	*
rgrover1	537:00d5affbb2b2	712	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	713	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	714	* ble.updateConnectionParams() should be replaced with
rgrover1	537:00d5affbb2b2	715	* ble.gap().updateConnectionParams().
rgrover1	537:00d5affbb2b2	716	*/
rgrover1	537:00d5affbb2b2	717	ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
rgrover1	537:00d5affbb2b2	718	return gap().updateConnectionParams(handle, params);
rgrover1	537:00d5affbb2b2	719	}
rgrover1	537:00d5affbb2b2	720
rgrover1	537:00d5affbb2b2	721	/**
rgrover1	537:00d5affbb2b2	722	* Set the device name characteristic in the GAP service.
rgrover1	537:00d5affbb2b2	723	* @param[in] deviceName
rgrover1	537:00d5affbb2b2	724	* The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1	537:00d5affbb2b2	725	*
rgrover1	537:00d5affbb2b2	726	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	727	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	728	* ble.setDeviceName() should be replaced with
rgrover1	537:00d5affbb2b2	729	* ble.gap().setDeviceName().
rgrover1	537:00d5affbb2b2	730	*/
rgrover1	537:00d5affbb2b2	731	ble_error_t setDeviceName(const uint8_t *deviceName) {
rgrover1	537:00d5affbb2b2	732	return gap().setDeviceName(deviceName);
rgrover1	537:00d5affbb2b2	733	}
rgrover1	537:00d5affbb2b2	734
rgrover1	537:00d5affbb2b2	735	/**
rgrover1	537:00d5affbb2b2	736	* Get the value of the device name characteristic in the GAP service.
rgrover1	537:00d5affbb2b2	737	* @param[out] deviceName
rgrover1	537:00d5affbb2b2	738	* Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1	537:00d5affbb2b2	739	* terminated* string will be placed. Set this
rgrover1	537:00d5affbb2b2	740	* value to NULL in order to obtain the deviceName-length
rgrover1	537:00d5affbb2b2	741	* from the 'length' parameter.
rgrover1	537:00d5affbb2b2	742	*
rgrover1	537:00d5affbb2b2	743	* @param[in/out] lengthP
rgrover1	537:00d5affbb2b2	744	* (on input) Length of the buffer pointed to by deviceName;
rgrover1	537:00d5affbb2b2	745	* (on output) the complete device name length (without the
rgrover1	537:00d5affbb2b2	746	* null terminator).
rgrover1	537:00d5affbb2b2	747	*
rgrover1	537:00d5affbb2b2	748	* @note If the device name is longer than the size of the supplied buffer,
rgrover1	537:00d5affbb2b2	749	* length will return the complete device name length, and not the
rgrover1	537:00d5affbb2b2	750	* number of bytes actually returned in deviceName. The application may
rgrover1	537:00d5affbb2b2	751	* use this information to retry with a suitable buffer size.
rgrover1	537:00d5affbb2b2	752	*
rgrover1	537:00d5affbb2b2	753	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	754	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	755	* ble.getDeviceName() should be replaced with
rgrover1	537:00d5affbb2b2	756	* ble.gap().getDeviceName().
rgrover1	537:00d5affbb2b2	757	*/
rgrover1	537:00d5affbb2b2	758	ble_error_t getDeviceName(uint8_t deviceName, unsigned lengthP) {
rgrover1	537:00d5affbb2b2	759	return gap().getDeviceName(deviceName, lengthP);
rgrover1	537:00d5affbb2b2	760	}
rgrover1	537:00d5affbb2b2	761
rgrover1	537:00d5affbb2b2	762	/**
rgrover1	537:00d5affbb2b2	763	* Set the appearance characteristic in the GAP service.
rgrover1	537:00d5affbb2b2	764	* @param[in] appearance
rgrover1	537:00d5affbb2b2	765	* The new value for the device-appearance.
rgrover1	537:00d5affbb2b2	766	*
rgrover1	537:00d5affbb2b2	767	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	768	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	769	* ble.setAppearance() should be replaced with
rgrover1	537:00d5affbb2b2	770	* ble.gap().setAppearance().
rgrover1	537:00d5affbb2b2	771	*/
rgrover1	537:00d5affbb2b2	772	ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
rgrover1	537:00d5affbb2b2	773	return gap().setAppearance(appearance);
rgrover1	537:00d5affbb2b2	774	}
rgrover1	537:00d5affbb2b2	775
rgrover1	537:00d5affbb2b2	776	/**
rgrover1	537:00d5affbb2b2	777	* Get the appearance characteristic in the GAP service.
rgrover1	537:00d5affbb2b2	778	* @param[out] appearance
rgrover1	537:00d5affbb2b2	779	* The new value for the device-appearance.
rgrover1	537:00d5affbb2b2	780	*
rgrover1	537:00d5affbb2b2	781	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	782	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	783	* ble.getAppearance() should be replaced with
rgrover1	537:00d5affbb2b2	784	* ble.gap().getAppearance().
rgrover1	537:00d5affbb2b2	785	*/
rgrover1	537:00d5affbb2b2	786	ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
rgrover1	537:00d5affbb2b2	787	return gap().getAppearance(appearanceP);
rgrover1	537:00d5affbb2b2	788	}
rgrover1	537:00d5affbb2b2	789
rgrover1	537:00d5affbb2b2	790	/**
rgrover1	537:00d5affbb2b2	791	* Set the radio's transmit power.
rgrover1	537:00d5affbb2b2	792	* @param[in] txPower Radio transmit power in dBm.
rgrover1	537:00d5affbb2b2	793	*
rgrover1	537:00d5affbb2b2	794	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	795	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	796	* ble.setTxPower() should be replaced with
rgrover1	537:00d5affbb2b2	797	* ble.gap().setTxPower().
rgrover1	537:00d5affbb2b2	798	*/
rgrover1	537:00d5affbb2b2	799	ble_error_t setTxPower(int8_t txPower) {
rgrover1	537:00d5affbb2b2	800	return gap().setTxPower(txPower);
rgrover1	537:00d5affbb2b2	801	}
rgrover1	537:00d5affbb2b2	802
rgrover1	537:00d5affbb2b2	803	/**
rgrover1	537:00d5affbb2b2	804	* Query the underlying stack for permitted arguments for setTxPower().
rgrover1	537:00d5affbb2b2	805	*
rgrover1	537:00d5affbb2b2	806	* @param[out] valueArrayPP
rgrover1	537:00d5affbb2b2	807	* Out parameter to receive the immutable array of Tx values.
rgrover1	537:00d5affbb2b2	808	* @param[out] countP
rgrover1	537:00d5affbb2b2	809	* Out parameter to receive the array's size.
rgrover1	537:00d5affbb2b2	810	*
rgrover1	537:00d5affbb2b2	811	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	812	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	813	* ble.getPermittedTxPowerValues() should be replaced with
rgrover1	537:00d5affbb2b2	814	* ble.gap().getPermittedTxPowerValues().
rgrover1	537:00d5affbb2b2	815	*/
rgrover1	537:00d5affbb2b2	816	void getPermittedTxPowerValues(const int8_t *valueArrayPP, size_t countP) {
rgrover1	537:00d5affbb2b2	817	gap().getPermittedTxPowerValues(valueArrayPP, countP);
rgrover1	537:00d5affbb2b2	818	}
rgrover1	528:8d21604fe31d	819
rgrover1	528:8d21604fe31d	820	/* APIs to set GAP callbacks. */
rgrover1	528:8d21604fe31d	821	void onTimeout(Gap::EventCallback_t timeoutCallback);
rgrover1	528:8d21604fe31d	822
rgrover1	528:8d21604fe31d	823	void onConnection(Gap::ConnectionEventCallback_t connectionCallback);
rgrover1	528:8d21604fe31d	824	/**
rgrover1	528:8d21604fe31d	825	* Used to setup a callback for GAP disconnection.
rgrover1	528:8d21604fe31d	826	*/
rgrover1	528:8d21604fe31d	827	void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback);
rgrover1	528:8d21604fe31d	828
rgrover1	528:8d21604fe31d	829	/**
rgrover1	528:8d21604fe31d	830	* Append to a chain of callbacks to be invoked upon disconnection; these
rgrover1	528:8d21604fe31d	831	* callbacks receive no context and are therefore different from the
rgrover1	528:8d21604fe31d	832	* onDisconnection callback.
rgrover1	528:8d21604fe31d	833	*/
rgrover1	528:8d21604fe31d	834	template<typename T>
rgrover1	528:8d21604fe31d	835	void addToDisconnectionCallChain(T tptr, void (T::mptr)(void));
rgrover1	528:8d21604fe31d	836
rgrover1	528:8d21604fe31d	837	/**
rgrover1	528:8d21604fe31d	838	* Add a callback for the GATT event DATA_SENT (which is triggered when
rgrover1	528:8d21604fe31d	839	* updates are sent out by GATT in the form of notifications).
rgrover1	528:8d21604fe31d	840	*
rgrover1	528:8d21604fe31d	841	* @Note: it is possible to chain together multiple onDataSent callbacks
rgrover1	528:8d21604fe31d	842	* (potentially from different modules of an application) to receive updates
rgrover1	528:8d21604fe31d	843	* to characteristics.
rgrover1	528:8d21604fe31d	844	*
rgrover1	528:8d21604fe31d	845	* @Note: it is also possible to setup a callback into a member function of
rgrover1	528:8d21604fe31d	846	* some object.
rgrover1	528:8d21604fe31d	847	*/
rgrover1	528:8d21604fe31d	848	void onDataSent(void (*callback)(unsigned count));
rgrover1	528:8d21604fe31d	849	template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count));
rgrover1	528:8d21604fe31d	850
rgrover1	528:8d21604fe31d	851	/**
rgrover1	528:8d21604fe31d	852	* Setup a callback for when a characteristic has its value updated by a
rgrover1	528:8d21604fe31d	853	* client.
rgrover1	528:8d21604fe31d	854	*
rgrover1	528:8d21604fe31d	855	* @Note: it is possible to chain together multiple onDataWritten callbacks
rgrover1	528:8d21604fe31d	856	* (potentially from different modules of an application) to receive updates
rgrover1	528:8d21604fe31d	857	* to characteristics. Many services, such as DFU and UART add their own
rgrover1	528:8d21604fe31d	858	* onDataWritten callbacks behind the scenes to trap interesting events.
rgrover1	528:8d21604fe31d	859	*
rgrover1	528:8d21604fe31d	860	* @Note: it is also possible to setup a callback into a member function of
rgrover1	528:8d21604fe31d	861	* some object.
rgrover1	528:8d21604fe31d	862	*/
rgrover1	528:8d21604fe31d	863	void onDataWritten(void (callback)(const GattWriteCallbackParams eventDataP));
rgrover1	528:8d21604fe31d	864	template <typename T> void onDataWritten(T * objPtr, void (T::memberPtr)(const GattWriteCallbackParams context));
rgrover1	528:8d21604fe31d	865
rgrover1	528:8d21604fe31d	866	/**
rgrover1	528:8d21604fe31d	867	* Setup a callback for when a characteristic is being read by a client.
rgrover1	528:8d21604fe31d	868	*
rgrover1	528:8d21604fe31d	869	* @Note: this functionality may not be available on all underlying stacks.
rgrover1	528:8d21604fe31d	870	* You could use GattCharacteristic::setReadAuthorizationCallback() as an
rgrover1	528:8d21604fe31d	871	* alternative.
rgrover1	528:8d21604fe31d	872	*
rgrover1	528:8d21604fe31d	873	* @Note: it is possible to chain together multiple onDataRead callbacks
rgrover1	528:8d21604fe31d	874	* (potentially from different modules of an application) to receive updates
rgrover1	528:8d21604fe31d	875	* to characteristics. Services may add their own onDataRead callbacks
rgrover1	528:8d21604fe31d	876	* behind the scenes to trap interesting events.
rgrover1	528:8d21604fe31d	877	*
rgrover1	528:8d21604fe31d	878	* @Note: it is also possible to setup a callback into a member function of
rgrover1	528:8d21604fe31d	879	* some object.
rgrover1	528:8d21604fe31d	880	*
rgrover1	528:8d21604fe31d	881	* @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
rgrover1	528:8d21604fe31d	882	* else BLE_ERROR_NONE.
rgrover1	528:8d21604fe31d	883	*/
rgrover1	528:8d21604fe31d	884	ble_error_t onDataRead(void (callback)(const GattReadCallbackParams eventDataP));
rgrover1	528:8d21604fe31d	885	template <typename T> ble_error_t onDataRead(T * objPtr, void (T::memberPtr)(const GattReadCallbackParams context));
rgrover1	528:8d21604fe31d	886
rgrover1	528:8d21604fe31d	887	void onUpdatesEnabled(GattServer::EventCallback_t callback);
rgrover1	528:8d21604fe31d	888	void onUpdatesDisabled(GattServer::EventCallback_t callback);
rgrover1	528:8d21604fe31d	889	void onConfirmationReceived(GattServer::EventCallback_t callback);
rgrover1	528:8d21604fe31d	890
rgrover1	528:8d21604fe31d	891	/**
rgrover1	528:8d21604fe31d	892	* Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1	528:8d21604fe31d	893	* (nACTIVE) signals from the stack that notify the application when the
rgrover1	528:8d21604fe31d	894	* radio is in use. The signal is sent using software interrupt.
rgrover1	528:8d21604fe31d	895	*
rgrover1	528:8d21604fe31d	896	* The ACTIVE signal is sent before the Radio Event starts. The nACTIVE
rgrover1	528:8d21604fe31d	897	* signal is sent at the end of the Radio Event. These signals can be used
rgrover1	528:8d21604fe31d	898	* by the application programmer to synchronize application logic with radio
rgrover1	528:8d21604fe31d	899	* activity. For example, the ACTIVE signal can be used to shut off external
rgrover1	528:8d21604fe31d	900	* devices to manage peak current drawn during periods when the radio is on,
rgrover1	528:8d21604fe31d	901	* or to trigger sensor data collection for transmission in the Radio Event.
rgrover1	528:8d21604fe31d	902	*
rgrover1	528:8d21604fe31d	903	* @param callback
rgrover1	528:8d21604fe31d	904	* The application handler to be invoked in response to a radio
rgrover1	528:8d21604fe31d	905	* ACTIVE/INACTIVE event.
rgrover1	528:8d21604fe31d	906	*/
rgrover1	528:8d21604fe31d	907	void onRadioNotification(Gap::RadioNotificationEventCallback_t callback);
rgrover1	528:8d21604fe31d	908
rgrover1	528:8d21604fe31d	909	/**
rgrover1	528:8d21604fe31d	910	* Add a service declaration to the local server ATT table. Also add the
rgrover1	528:8d21604fe31d	911	* characteristics contained within.
rgrover1	528:8d21604fe31d	912	*/
rgrover1	528:8d21604fe31d	913	ble_error_t addService(GattService &service);
rgrover1	528:8d21604fe31d	914
rgrover1	528:8d21604fe31d	915	/**
rgrover1	528:8d21604fe31d	916	* @param[in/out] lengthP
rgrover1	528:8d21604fe31d	917	* input: Length in bytes to be read,
rgrover1	528:8d21604fe31d	918	* output: Total length of attribute value upon successful return.
rgrover1	528:8d21604fe31d	919	*/
rgrover1	528:8d21604fe31d	920	ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP);
rgrover1	528:8d21604fe31d	921	/**
rgrover1	528:8d21604fe31d	922	* A version of the same as above with connection handle parameter to allow fetches for connection-specific multivalued attribtues (such as the CCCDs).
rgrover1	528:8d21604fe31d	923	*/
rgrover1	528:8d21604fe31d	924	ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP);
rgrover1	528:8d21604fe31d	925
rgrover1	528:8d21604fe31d	926	/**
rgrover1	528:8d21604fe31d	927	* @param localOnly
rgrover1	528:8d21604fe31d	928	* Only update the characteristic locally regardless of notify/indicate flags in the CCCD.
rgrover1	528:8d21604fe31d	929	*/
rgrover1	528:8d21604fe31d	930	ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle, const uint8_t *value, uint16_t size, bool localOnly = false);
rgrover1	528:8d21604fe31d	931	/**
rgrover1	528:8d21604fe31d	932	* A version of the same as above with connection handle parameter to allow updates for connection-specific multivalued attribtues (such as the CCCDs).
rgrover1	528:8d21604fe31d	933	*/
rgrover1	528:8d21604fe31d	934	ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
rgrover1	528:8d21604fe31d	935	GattAttribute::Handle_t attributeHandle,
rgrover1	528:8d21604fe31d	936	const uint8_t *value,
rgrover1	528:8d21604fe31d	937	uint16_t size,
rgrover1	528:8d21604fe31d	938	bool localOnly = false);
rgrover1	528:8d21604fe31d	939
rgrover1	528:8d21604fe31d	940	/**
rgrover1	528:8d21604fe31d	941	* Enable the BLE stack's Security Manager. The Security Manager implements
rgrover1	528:8d21604fe31d	942	* the actual cryptographic algorithms and protocol exchanges that allow two
rgrover1	528:8d21604fe31d	943	* devices to securely exchange data and privately detect each other.
rgrover1	528:8d21604fe31d	944	* Calling this API is a prerequisite for encryption and pairing (bonding).
rgrover1	528:8d21604fe31d	945	*
rgrover1	528:8d21604fe31d	946	* @param[in] enableBonding Allow for bonding.
rgrover1	528:8d21604fe31d	947	* @param[in] requireMITM Require protection for man-in-the-middle attacks.
rgrover1	528:8d21604fe31d	948	* @param[in] iocaps To specify IO capabilities of this peripheral,
rgrover1	528:8d21604fe31d	949	* such as availability of a display or keyboard to
rgrover1	528:8d21604fe31d	950	* support out-of-band exchanges of security data.
rgrover1	528:8d21604fe31d	951	* @param[in] passkey To specify a static passkey.
rgrover1	528:8d21604fe31d	952	*
rgrover1	528:8d21604fe31d	953	* @return BLE_ERROR_NONE on success.
rgrover1	528:8d21604fe31d	954	*/
rgrover1	528:8d21604fe31d	955	ble_error_t initializeSecurity(bool enableBonding = true,
rgrover1	528:8d21604fe31d	956	bool requireMITM = true,
rgrover1	528:8d21604fe31d	957	Gap::SecurityIOCapabilities_t iocaps = Gap::IO_CAPS_NONE,
rgrover1	528:8d21604fe31d	958	const Gap::Passkey_t passkey = NULL);
rgrover1	528:8d21604fe31d	959
rgrover1	528:8d21604fe31d	960	/**
rgrover1	528:8d21604fe31d	961	* Setup a callback for when the security setup procedure (key generation
rgrover1	528:8d21604fe31d	962	* and exchange) for a link has started. This will be skipped for bonded
rgrover1	528:8d21604fe31d	963	* devices. The callback is passed in parameters received from the peer's
rgrover1	528:8d21604fe31d	964	* security request: bool allowBonding, bool requireMITM, and
rgrover1	528:8d21604fe31d	965	* SecurityIOCapabilities_t.
rgrover1	528:8d21604fe31d	966	*/
rgrover1	528:8d21604fe31d	967	void onSecuritySetupInitiated(Gap::SecuritySetupInitiatedCallback_t callback);
rgrover1	528:8d21604fe31d	968
rgrover1	528:8d21604fe31d	969	/**
rgrover1	528:8d21604fe31d	970	* Setup a callback for when the security setup procedure (key generation
rgrover1	528:8d21604fe31d	971	* and exchange) for a link has completed. This will be skipped for bonded
rgrover1	528:8d21604fe31d	972	* devices. The callback is passed in the success/failure status of the
rgrover1	528:8d21604fe31d	973	* security setup procedure.
rgrover1	528:8d21604fe31d	974	*/
rgrover1	528:8d21604fe31d	975	void onSecuritySetupCompleted(Gap::SecuritySetupCompletedCallback_t callback);
rgrover1	528:8d21604fe31d	976
rgrover1	528:8d21604fe31d	977	/**
rgrover1	528:8d21604fe31d	978	* Setup a callback for when a link with the peer is secured. For bonded
rgrover1	528:8d21604fe31d	979	* devices, subsequent reconnections with bonded peer will result only in
rgrover1	528:8d21604fe31d	980	* this callback when the link is secured and setup procedures will not
rgrover1	528:8d21604fe31d	981	* occur unless the bonding information is either lost or deleted on either
rgrover1	528:8d21604fe31d	982	* or both sides. The callback is passed in a Gap::SecurityMode_t according
rgrover1	528:8d21604fe31d	983	* to the level of security in effect for the secured link.
rgrover1	528:8d21604fe31d	984	*/
rgrover1	528:8d21604fe31d	985	void onLinkSecured(Gap::LinkSecuredCallback_t callback);
rgrover1	528:8d21604fe31d	986
rgrover1	528:8d21604fe31d	987	/**
rgrover1	528:8d21604fe31d	988	* Setup a callback for successful bonding; i.e. that link-specific security
rgrover1	528:8d21604fe31d	989	* context is stored persistently for a peer device.
rgrover1	528:8d21604fe31d	990	*/
rgrover1	528:8d21604fe31d	991	void onSecurityContextStored(Gap::HandleSpecificEvent_t callback);
rgrover1	528:8d21604fe31d	992
rgrover1	528:8d21604fe31d	993	/**
rgrover1	528:8d21604fe31d	994	* Setup a callback for when the passkey needs to be displayed on a
rgrover1	528:8d21604fe31d	995	* peripheral with DISPLAY capability. This happens when security is
rgrover1	528:8d21604fe31d	996	* configured to prevent Man-In-The-Middle attacks, and a PIN (or passkey)
rgrover1	528:8d21604fe31d	997	* needs to be exchanged between the peers to authenticate the connection
rgrover1	528:8d21604fe31d	998	* attempt.
rgrover1	528:8d21604fe31d	999	*/
rgrover1	528:8d21604fe31d	1000	void onPasskeyDisplay(Gap::PasskeyDisplayCallback_t callback);
rgrover1	528:8d21604fe31d	1001
rgrover1	528:8d21604fe31d	1002	/**
rgrover1	528:8d21604fe31d	1003	* Get the security status of a connection.
rgrover1	528:8d21604fe31d	1004	*
rgrover1	528:8d21604fe31d	1005	* @param[in] connectionHandle Handle to identify the connection.
rgrover1	528:8d21604fe31d	1006	* @param[out] securityStatusP security status.
rgrover1	528:8d21604fe31d	1007	*
rgrover1	528:8d21604fe31d	1008	* @return BLE_SUCCESS Or appropriate error code indicating reason for failure.
rgrover1	528:8d21604fe31d	1009	*/
rgrover1	528:8d21604fe31d	1010	ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, Gap::LinkSecurityStatus_t *securityStatusP);
rgrover1	528:8d21604fe31d	1011
rgrover1	528:8d21604fe31d	1012	/**
rgrover1	528:8d21604fe31d	1013	* Delete all peer device context and all related bonding information from
rgrover1	528:8d21604fe31d	1014	* the database within the security manager.
rgrover1	528:8d21604fe31d	1015	*
rgrover1	528:8d21604fe31d	1016	* @retval BLE_ERROR_NONE On success, else an error code indicating reason for failure.
rgrover1	528:8d21604fe31d	1017	* @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization and/or
rgrover1	528:8d21604fe31d	1018	* application registration.
rgrover1	528:8d21604fe31d	1019	*/
rgrover1	528:8d21604fe31d	1020	ble_error_t purgeAllBondingState(void);
rgrover1	528:8d21604fe31d	1021
rgrover1	528:8d21604fe31d	1022	/**
rgrover1	528:8d21604fe31d	1023	* Launch service discovery. Once launched, service discovery will remain
rgrover1	528:8d21604fe31d	1024	* active with callbacks being issued back into the application for matching
rgrover1	528:8d21604fe31d	1025	* services/characteristics. isServiceDiscoveryActive() can be used to
rgrover1	528:8d21604fe31d	1026	* determine status; and a termination callback (if setup) will be invoked
rgrover1	528:8d21604fe31d	1027	* at the end. Service discovery can be terminated prematurely if needed
rgrover1	528:8d21604fe31d	1028	* using terminateServiceDiscovery().
rgrover1	528:8d21604fe31d	1029	*
rgrover1	528:8d21604fe31d	1030	* @param connectionHandle
rgrover1	528:8d21604fe31d	1031	* Handle for the connection with the peer.
rgrover1	528:8d21604fe31d	1032	* @param sc
rgrover1	528:8d21604fe31d	1033	* This is the application callback for matching service. Taken as
rgrover1	528:8d21604fe31d	1034	* NULL by default. Note: service discovery may still be active
rgrover1	528:8d21604fe31d	1035	* when this callback is issued; calling asynchronous BLE-stack
rgrover1	528:8d21604fe31d	1036	* APIs from within this application callback might cause the
rgrover1	528:8d21604fe31d	1037	* stack to abort service discovery. If this becomes an issue, it
rgrover1	528:8d21604fe31d	1038	* may be better to make local copy of the discoveredService and
rgrover1	528:8d21604fe31d	1039	* wait for service discovery to terminate before operating on the
rgrover1	528:8d21604fe31d	1040	* service.
rgrover1	528:8d21604fe31d	1041	* @param cc
rgrover1	528:8d21604fe31d	1042	* This is the application callback for matching characteristic.
rgrover1	528:8d21604fe31d	1043	* Taken as NULL by default. Note: service discovery may still be
rgrover1	528:8d21604fe31d	1044	* active when this callback is issued; calling asynchronous
rgrover1	528:8d21604fe31d	1045	* BLE-stack APIs from within this application callback might cause
rgrover1	528:8d21604fe31d	1046	* the stack to abort service discovery. If this becomes an issue,
rgrover1	528:8d21604fe31d	1047	* it may be better to make local copy of the discoveredCharacteristic
rgrover1	528:8d21604fe31d	1048	* and wait for service discovery to terminate before operating on the
rgrover1	528:8d21604fe31d	1049	* characteristic.
rgrover1	528:8d21604fe31d	1050	* @param matchingServiceUUID
rgrover1	528:8d21604fe31d	1051	* UUID based filter for specifying a service in which the application is
rgrover1	528:8d21604fe31d	1052	* interested. By default it is set as the wildcard UUID_UNKNOWN,
rgrover1	528:8d21604fe31d	1053	* in which case it matches all services. If characteristic-UUID
rgrover1	528:8d21604fe31d	1054	* filter (below) is set to the wildcard value, then a service
rgrover1	528:8d21604fe31d	1055	* callback will be invoked for the matching service (or for every
rgrover1	528:8d21604fe31d	1056	* service if the service filter is a wildcard).
rgrover1	528:8d21604fe31d	1057	* @param matchingCharacteristicUUIDIn
rgrover1	528:8d21604fe31d	1058	* UUID based filter for specifying characteristic in which the application
rgrover1	528:8d21604fe31d	1059	* is interested. By default it is set as the wildcard UUID_UKNOWN
rgrover1	528:8d21604fe31d	1060	* to match against any characteristic. If both service-UUID
rgrover1	528:8d21604fe31d	1061	* filter and characteristic-UUID filter are used with non- wildcard
rgrover1	528:8d21604fe31d	1062	* values, then only a single characteristic callback is
rgrover1	528:8d21604fe31d	1063	* invoked for the matching characteristic.
rgrover1	528:8d21604fe31d	1064	*
rgrover1	528:8d21604fe31d	1065	* @Note Using wildcard values for both service-UUID and characteristic-
rgrover1	528:8d21604fe31d	1066	* UUID will result in complete service discovery--callbacks being
rgrover1	528:8d21604fe31d	1067	* called for every service and characteristic.
rgrover1	528:8d21604fe31d	1068	*
rgrover1	528:8d21604fe31d	1069	* @return
rgrover1	528:8d21604fe31d	1070	* BLE_ERROR_NONE if service discovery is launched successfully; else an appropriate error.
rgrover1	528:8d21604fe31d	1071	*/
rgrover1	528:8d21604fe31d	1072	ble_error_t launchServiceDiscovery(Gap::Handle_t connectionHandle,
rgrover1	528:8d21604fe31d	1073	ServiceDiscovery::ServiceCallback_t sc = NULL,
rgrover1	528:8d21604fe31d	1074	ServiceDiscovery::CharacteristicCallback_t cc = NULL,
rgrover1	528:8d21604fe31d	1075	const UUID &matchingServiceUUID = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN),
rgrover1	528:8d21604fe31d	1076	const UUID &matchingCharacteristicUUIDIn = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN));
rgrover1	528:8d21604fe31d	1077
rgrover1	528:8d21604fe31d	1078	/**
rgrover1	528:8d21604fe31d	1079	* Setup callback for when serviceDiscovery terminates.
rgrover1	528:8d21604fe31d	1080	*/
rgrover1	528:8d21604fe31d	1081	void onServiceDiscoveryTermination(ServiceDiscovery::TerminationCallback_t callback);
rgrover1	528:8d21604fe31d	1082
rgrover1	528:8d21604fe31d	1083	/**
rgrover1	528:8d21604fe31d	1084	* Is service-discovery currently active?
rgrover1	528:8d21604fe31d	1085	*/
rgrover1	528:8d21604fe31d	1086	bool isServiceDiscoveryActive(void);
rgrover1	528:8d21604fe31d	1087
rgrover1	528:8d21604fe31d	1088	/**
rgrover1	528:8d21604fe31d	1089	* Terminate an ongoing service-discovery. This should result in an
rgrover1	528:8d21604fe31d	1090	* invocation of the TerminationCallback if service-discovery is active.
rgrover1	528:8d21604fe31d	1091	*/
rgrover1	528:8d21604fe31d	1092	void terminateServiceDiscovery(void);
rgrover1	528:8d21604fe31d	1093
rgrover1	528:8d21604fe31d	1094	public:
rgrover1	531:bdcd44b03974	1095	BLE() : transport(createBLEInstance()) {
rgrover1	531:bdcd44b03974	1096	/* empty */
rgrover1	528:8d21604fe31d	1097	}
rgrover1	528:8d21604fe31d	1098
rgrover1	528:8d21604fe31d	1099	private:
rgrover1	528:8d21604fe31d	1100	BLEInstanceBase const transport; / the device specific backend */
rgrover1	528:8d21604fe31d	1101	};
rgrover1	528:8d21604fe31d	1102
rgrover1	537:00d5affbb2b2	1103	typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
rgrover1	528:8d21604fe31d	1104	* code. Will be dropped at some point soon.*/
rgrover1	528:8d21604fe31d	1105
rgrover1	528:8d21604fe31d	1106	/* BLE methods. Most of these simply forward the calls to the underlying
rgrover1	528:8d21604fe31d	1107	* transport.*/
rgrover1	528:8d21604fe31d	1108
rgrover1	528:8d21604fe31d	1109	inline void
rgrover1	528:8d21604fe31d	1110	BLE::onTimeout(Gap::EventCallback_t timeoutCallback)
rgrover1	528:8d21604fe31d	1111	{
rgrover1	531:bdcd44b03974	1112	gap().setOnTimeout(timeoutCallback);
rgrover1	528:8d21604fe31d	1113	}
rgrover1	528:8d21604fe31d	1114
rgrover1	528:8d21604fe31d	1115	inline void
rgrover1	528:8d21604fe31d	1116	BLE::onConnection(Gap::ConnectionEventCallback_t connectionCallback)
rgrover1	528:8d21604fe31d	1117	{
rgrover1	531:bdcd44b03974	1118	gap().setOnConnection(connectionCallback);
rgrover1	528:8d21604fe31d	1119	}
rgrover1	528:8d21604fe31d	1120
rgrover1	528:8d21604fe31d	1121	inline void
rgrover1	528:8d21604fe31d	1122	BLE::onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback)
rgrover1	528:8d21604fe31d	1123	{
rgrover1	531:bdcd44b03974	1124	gap().setOnDisconnection(disconnectionCallback);
rgrover1	528:8d21604fe31d	1125	}
rgrover1	528:8d21604fe31d	1126
rgrover1	528:8d21604fe31d	1127	template<typename T>
rgrover1	528:8d21604fe31d	1128	inline void
rgrover1	528:8d21604fe31d	1129	BLE::addToDisconnectionCallChain(T tptr, void (T::mptr)(void)) {
rgrover1	531:bdcd44b03974	1130	gap().addToDisconnectionCallChain(tptr, mptr);
rgrover1	528:8d21604fe31d	1131	}
rgrover1	528:8d21604fe31d	1132
rgrover1	528:8d21604fe31d	1133	inline void
rgrover1	528:8d21604fe31d	1134	BLE::onDataSent(void (*callback)(unsigned count)) {
rgrover1	528:8d21604fe31d	1135	transport->getGattServer().setOnDataSent(callback);
rgrover1	528:8d21604fe31d	1136	}
rgrover1	528:8d21604fe31d	1137
rgrover1	528:8d21604fe31d	1138	template <typename T> inline void
rgrover1	528:8d21604fe31d	1139	BLE::onDataSent(T objPtr, void (T::memberPtr)(unsigned count)) {
rgrover1	528:8d21604fe31d	1140	transport->getGattServer().setOnDataSent(objPtr, memberPtr);
rgrover1	528:8d21604fe31d	1141	}
rgrover1	528:8d21604fe31d	1142
rgrover1	528:8d21604fe31d	1143	inline void
rgrover1	528:8d21604fe31d	1144	BLE::onDataWritten(void (callback)(const GattWriteCallbackParams eventDataP)) {
rgrover1	528:8d21604fe31d	1145	transport->getGattServer().setOnDataWritten(callback);
rgrover1	528:8d21604fe31d	1146	}
rgrover1	528:8d21604fe31d	1147
rgrover1	528:8d21604fe31d	1148	template <typename T> inline void
rgrover1	528:8d21604fe31d	1149	BLE::onDataWritten(T objPtr, void (T::memberPtr)(const GattWriteCallbackParams *context)) {
rgrover1	528:8d21604fe31d	1150	transport->getGattServer().setOnDataWritten(objPtr, memberPtr);
rgrover1	528:8d21604fe31d	1151	}
rgrover1	528:8d21604fe31d	1152
rgrover1	528:8d21604fe31d	1153	inline ble_error_t
rgrover1	528:8d21604fe31d	1154	BLE::onDataRead(void (callback)(const GattReadCallbackParams eventDataP)) {
rgrover1	528:8d21604fe31d	1155	return transport->getGattServer().setOnDataRead(callback);
rgrover1	528:8d21604fe31d	1156	}
rgrover1	528:8d21604fe31d	1157
rgrover1	528:8d21604fe31d	1158	template <typename T> inline ble_error_t
rgrover1	528:8d21604fe31d	1159	BLE::onDataRead(T objPtr, void (T::memberPtr)(const GattReadCallbackParams *context)) {
rgrover1	528:8d21604fe31d	1160	return transport->getGattServer().setOnDataRead(objPtr, memberPtr);
rgrover1	528:8d21604fe31d	1161	}
rgrover1	528:8d21604fe31d	1162
rgrover1	528:8d21604fe31d	1163	inline void
rgrover1	528:8d21604fe31d	1164	BLE::onUpdatesEnabled(GattServer::EventCallback_t callback)
rgrover1	528:8d21604fe31d	1165	{
rgrover1	528:8d21604fe31d	1166	transport->getGattServer().setOnUpdatesEnabled(callback);
rgrover1	528:8d21604fe31d	1167	}
rgrover1	528:8d21604fe31d	1168
rgrover1	528:8d21604fe31d	1169	inline void
rgrover1	528:8d21604fe31d	1170	BLE::onUpdatesDisabled(GattServer::EventCallback_t callback)
rgrover1	528:8d21604fe31d	1171	{
rgrover1	528:8d21604fe31d	1172	transport->getGattServer().setOnUpdatesDisabled(callback);
rgrover1	528:8d21604fe31d	1173	}
rgrover1	528:8d21604fe31d	1174
rgrover1	528:8d21604fe31d	1175	inline void
rgrover1	528:8d21604fe31d	1176	BLE::onConfirmationReceived(GattServer::EventCallback_t callback)
rgrover1	528:8d21604fe31d	1177	{
rgrover1	528:8d21604fe31d	1178	transport->getGattServer().setOnConfirmationReceived(callback);
rgrover1	528:8d21604fe31d	1179	}
rgrover1	528:8d21604fe31d	1180
rgrover1	528:8d21604fe31d	1181	inline void
rgrover1	528:8d21604fe31d	1182	BLE::onRadioNotification(Gap::RadioNotificationEventCallback_t callback)
rgrover1	528:8d21604fe31d	1183	{
rgrover1	531:bdcd44b03974	1184	gap().setOnRadioNotification(callback);
rgrover1	528:8d21604fe31d	1185	}
rgrover1	528:8d21604fe31d	1186
rgrover1	528:8d21604fe31d	1187	inline ble_error_t
rgrover1	528:8d21604fe31d	1188	BLE::addService(GattService &service)
rgrover1	528:8d21604fe31d	1189	{
rgrover1	528:8d21604fe31d	1190	return transport->getGattServer().addService(service);
rgrover1	528:8d21604fe31d	1191	}
rgrover1	528:8d21604fe31d	1192
rgrover1	528:8d21604fe31d	1193	inline ble_error_t
rgrover1	528:8d21604fe31d	1194	BLE::readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP)
rgrover1	528:8d21604fe31d	1195	{
rgrover1	528:8d21604fe31d	1196	return transport->getGattServer().readValue(attributeHandle, buffer, lengthP);
rgrover1	528:8d21604fe31d	1197	}
rgrover1	528:8d21604fe31d	1198
rgrover1	528:8d21604fe31d	1199	inline ble_error_t
rgrover1	528:8d21604fe31d	1200	BLE::readCharacteristicValue(Gap::Handle_t connectionHandle,
rgrover1	528:8d21604fe31d	1201	GattAttribute::Handle_t attributeHandle,
rgrover1	528:8d21604fe31d	1202	uint8_t *buffer,
rgrover1	528:8d21604fe31d	1203	uint16_t *lengthP)
rgrover1	528:8d21604fe31d	1204	{
rgrover1	528:8d21604fe31d	1205	return transport->getGattServer().readValue(connectionHandle, attributeHandle, buffer, lengthP);
rgrover1	528:8d21604fe31d	1206	}
rgrover1	528:8d21604fe31d	1207
rgrover1	528:8d21604fe31d	1208	inline ble_error_t
rgrover1	528:8d21604fe31d	1209	BLE::updateCharacteristicValue(GattAttribute::Handle_t attributeHandle, const uint8_t *value, uint16_t size, bool localOnly)
rgrover1	528:8d21604fe31d	1210	{
rgrover1	528:8d21604fe31d	1211	return transport->getGattServer().updateValue(attributeHandle, const_cast<uint8_t *>(value), size, localOnly);
rgrover1	528:8d21604fe31d	1212	}
rgrover1	528:8d21604fe31d	1213
rgrover1	528:8d21604fe31d	1214	inline ble_error_t
rgrover1	528:8d21604fe31d	1215	BLE::updateCharacteristicValue(Gap::Handle_t connectionHandle,
rgrover1	528:8d21604fe31d	1216	GattAttribute::Handle_t attributeHandle,
rgrover1	528:8d21604fe31d	1217	const uint8_t *value,
rgrover1	528:8d21604fe31d	1218	uint16_t size,
rgrover1	528:8d21604fe31d	1219	bool localOnly)
rgrover1	528:8d21604fe31d	1220	{
rgrover1	528:8d21604fe31d	1221	return transport->getGattServer().updateValue(connectionHandle, attributeHandle, const_cast<uint8_t *>(value), size, localOnly);
rgrover1	528:8d21604fe31d	1222	}
rgrover1	528:8d21604fe31d	1223
rgrover1	528:8d21604fe31d	1224	inline ble_error_t
rgrover1	528:8d21604fe31d	1225	BLE::initializeSecurity(bool enableBonding,
rgrover1	528:8d21604fe31d	1226	bool requireMITM,
rgrover1	528:8d21604fe31d	1227	Gap::SecurityIOCapabilities_t iocaps,
rgrover1	528:8d21604fe31d	1228	const Gap::Passkey_t passkey)
rgrover1	528:8d21604fe31d	1229	{
rgrover1	528:8d21604fe31d	1230	return transport->initializeSecurity(enableBonding, requireMITM, iocaps, passkey);
rgrover1	528:8d21604fe31d	1231	}
rgrover1	528:8d21604fe31d	1232
rgrover1	528:8d21604fe31d	1233	inline void
rgrover1	528:8d21604fe31d	1234	BLE::onSecuritySetupInitiated(Gap::SecuritySetupInitiatedCallback_t callback)
rgrover1	528:8d21604fe31d	1235	{
rgrover1	531:bdcd44b03974	1236	gap().setOnSecuritySetupInitiated(callback);
rgrover1	528:8d21604fe31d	1237	}
rgrover1	528:8d21604fe31d	1238
rgrover1	528:8d21604fe31d	1239	inline void
rgrover1	528:8d21604fe31d	1240	BLE::onSecuritySetupCompleted(Gap::SecuritySetupCompletedCallback_t callback)
rgrover1	528:8d21604fe31d	1241	{
rgrover1	531:bdcd44b03974	1242	gap().setOnSecuritySetupCompleted(callback);
rgrover1	528:8d21604fe31d	1243	}
rgrover1	528:8d21604fe31d	1244
rgrover1	528:8d21604fe31d	1245	inline void
rgrover1	528:8d21604fe31d	1246	BLE::onLinkSecured(Gap::LinkSecuredCallback_t callback)
rgrover1	528:8d21604fe31d	1247	{
rgrover1	531:bdcd44b03974	1248	gap().setOnLinkSecured(callback);
rgrover1	528:8d21604fe31d	1249	}
rgrover1	528:8d21604fe31d	1250
rgrover1	528:8d21604fe31d	1251	inline void
rgrover1	528:8d21604fe31d	1252	BLE::onSecurityContextStored(Gap::HandleSpecificEvent_t callback)
rgrover1	528:8d21604fe31d	1253	{
rgrover1	531:bdcd44b03974	1254	gap().setOnSecurityContextStored(callback);
rgrover1	528:8d21604fe31d	1255	}
rgrover1	528:8d21604fe31d	1256
rgrover1	528:8d21604fe31d	1257	inline void
rgrover1	528:8d21604fe31d	1258	BLE::onPasskeyDisplay(Gap::PasskeyDisplayCallback_t callback)
rgrover1	528:8d21604fe31d	1259	{
rgrover1	531:bdcd44b03974	1260	return gap().setOnPasskeyDisplay(callback);
rgrover1	528:8d21604fe31d	1261	}
rgrover1	528:8d21604fe31d	1262
rgrover1	528:8d21604fe31d	1263	inline ble_error_t
rgrover1	528:8d21604fe31d	1264	BLE::getLinkSecurity(Gap::Handle_t connectionHandle, Gap::LinkSecurityStatus_t *securityStatusP)
rgrover1	528:8d21604fe31d	1265	{
rgrover1	531:bdcd44b03974	1266	return gap().getLinkSecurity(connectionHandle, securityStatusP);
rgrover1	528:8d21604fe31d	1267	}
rgrover1	528:8d21604fe31d	1268
rgrover1	528:8d21604fe31d	1269	inline ble_error_t
rgrover1	528:8d21604fe31d	1270	BLE::purgeAllBondingState(void)
rgrover1	528:8d21604fe31d	1271	{
rgrover1	531:bdcd44b03974	1272	return gap().purgeAllBondingState();
rgrover1	528:8d21604fe31d	1273	}
rgrover1	528:8d21604fe31d	1274
rgrover1	528:8d21604fe31d	1275	inline ble_error_t
rgrover1	528:8d21604fe31d	1276	BLE::launchServiceDiscovery(Gap::Handle_t connectionHandle,
rgrover1	528:8d21604fe31d	1277	ServiceDiscovery::ServiceCallback_t sc,
rgrover1	528:8d21604fe31d	1278	ServiceDiscovery::CharacteristicCallback_t cc,
rgrover1	528:8d21604fe31d	1279	const UUID &matchingServiceUUID,
rgrover1	528:8d21604fe31d	1280	const UUID &matchingCharacteristicUUID)
rgrover1	528:8d21604fe31d	1281	{
rgrover1	528:8d21604fe31d	1282	return transport->getGattClient().launchServiceDiscovery(connectionHandle, sc, cc, matchingServiceUUID, matchingCharacteristicUUID);
rgrover1	528:8d21604fe31d	1283	}
rgrover1	528:8d21604fe31d	1284
rgrover1	528:8d21604fe31d	1285	inline void
rgrover1	528:8d21604fe31d	1286	BLE::onServiceDiscoveryTermination(ServiceDiscovery::TerminationCallback_t callback)
rgrover1	528:8d21604fe31d	1287	{
rgrover1	528:8d21604fe31d	1288	transport->getGattClient().onServiceDiscoveryTermination(callback);
rgrover1	528:8d21604fe31d	1289	}
rgrover1	528:8d21604fe31d	1290
rgrover1	528:8d21604fe31d	1291	/**
rgrover1	528:8d21604fe31d	1292	* Is service-discovery currently active?
rgrover1	528:8d21604fe31d	1293	*/
rgrover1	528:8d21604fe31d	1294	inline bool
rgrover1	528:8d21604fe31d	1295	BLE::isServiceDiscoveryActive(void)
rgrover1	528:8d21604fe31d	1296	{
rgrover1	528:8d21604fe31d	1297	return transport->getGattClient().isServiceDiscoveryActive();
rgrover1	528:8d21604fe31d	1298	}
rgrover1	528:8d21604fe31d	1299
rgrover1	528:8d21604fe31d	1300	/**
rgrover1	528:8d21604fe31d	1301	* Terminate an ongoing service-discovery. This should result in an
rgrover1	528:8d21604fe31d	1302	* invocation of the TerminationCallback if service-discovery is active.
rgrover1	528:8d21604fe31d	1303	*/
rgrover1	528:8d21604fe31d	1304	inline void
rgrover1	528:8d21604fe31d	1305	BLE::terminateServiceDiscovery(void)
rgrover1	528:8d21604fe31d	1306	{
rgrover1	528:8d21604fe31d	1307	transport->getGattClient().terminateServiceDiscovery();
rgrover1	528:8d21604fe31d	1308	}
rgrover1	528:8d21604fe31d	1309
rgrover1	528:8d21604fe31d	1310	#endif // ifndef __BLE_H__

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	05 Feb 2017
Imports:	1
Forks:	0
Commits:	1210
Dependents:	1
Dependencies:	0
Followers:	1

public/BLE.h@537:00d5affbb2b2, 2015-06-19 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning