SUNGTAE KIM / Mbed OS mbed-os-example-cellular-BG96-TCP

Set specific IP Address/Port

You are viewing an older revision! See the latest version

Homepage

Table of Contents

  1. Overview
  2. Requirement
  3. Example functionality

Overview

This code could be access via Cat.M1(BG96 module) of SK telecom network in Korea. Need a WIZnet IoT Shield BG96 board and development board. The code forked Daniel_Lee's mbed-os-example-cellular-BG96 repository(https://os.mbed.com/users/Daniel_Lee/code/mbed-os-example-cellular-BG96/) and added some features.

This example is known to work great on the following platforms:

/media/uploads/stkim92/pel01.png

Requirement

  1. FRDM-K64F or FRDM-K66F
  2. WIZnet IoT Shield BG96 board
  3. USIM card

Example functionality

This example showcases the following device functionality:

1. Import into Compiler

/media/uploads/stkim92/cellular_1.png

2. Compile and Program

\/media/uploads/stkim92/cellular_2.png

3. If successfully connect to cellular networks(SKTelecom) then you can get below message

Device's Result

include the mbed library with this snippet

mbed-os-example-cellular


Built: Sep  6 2019, 07:06:26


[MAIN], plmn: NULL
Establishing connection
M2Mnet(BG96) Power ON
[00005500ms][INFO][CELL]: New CellularContext  (20004120)
[00005500ms][INFO][CELL]: CellularContext plmn NULL
[00005501ms][INFO][CELL]: CellularContext connect
[00006502ms][INFO][CELL]: Start connecting (timeout 1000 ms)
[00006511ms][INFO][CELL]: RSSI unknown
[00006519ms][INFO][CELL]: Modem ready
[00006523ms][INFO][CELL]: RSSI unknown
[00006523ms][INFO][CELL]: Setup SIM (timeout 1000 ms)
[00006528ms][INFO][CELL]: SIM is ready
[00006555ms][INFO][CELL]: RSSI unknown
[00006563ms][INFO][CELL]: Network registration (timeout 1000 ms)
[00006567ms][INFO][CELL]: Continue after 1 seconds
[00006688ms][ERR ][CELL]: AT overflow
[00007572ms][INFO][CELL]: RSSI unknown
[00007578ms][INFO][CELL]: Registering network => Attaching network
[00007582ms][INFO][CELL]: RSSI unknown
[00007582ms][INFO][CELL]: Attaching network (timeout 1000 ms)
[00007606ms][INFO][CELL]: Found PDP context 2
[00007609ms][INFO][CELL]: Activate PDP context 2
[00009626ms][INFO][CELL]: Found PDP context 2


Connection Established.
[00009635ms][INFO][CELL]: Socket 0 open
[00009741ms][INFO][CELL]: Socket 0 sent 4 bytes to 222.98.173.203 port 7878
TCP: Sent 4 Bytes to 222.98.173.203
[00010873ms][INFO][CELL]: Socket 0 recv 4 bytes
[00011421ms][INFO][CELL]: Socket 0 closed
Received from server 4 Bytes
[00011421ms][INFO][CELL]: CellularContext disconnect()
[00011422ms][INFO][CELL]: cb: CellularContext disconnected


Success. Exiting

Server Result

/media/uploads/stkim92/mbed_guide_bg96_cellular-3.png

All wikipages