Interface using Wiznet W5500 chip to connect to an IP-based network. More...

#include <EthernetInterface.h>

Inherits WIZnet_Chip.

Public Member Functions
	EthernetInterface (PinName mosi, PinName miso, PinName sclk, PinName cs, PinName reset)
	Constructor.
int	init ()
	Initialize the interface with DHCP w/o MAC address Initialize the interface and configure it to use DHCP (no connection at this point).
int	init (uint8_t *mac)
	Initialize the interface with DHCP.
int	init (const char ip, const char mask, const char *gateway)
	Initialize the interface with a static IP address without MAC.
int	init (uint8_t mac, const char ip, const char mask, const char gateway)
	Initialize the interface with a static IP address.
int	connect ()
	Connect Bring the interface up, start DHCP if needed.
int	disconnect ()
	Disconnect Bring the interface down.
char *	getIPAddress ()
	Get IP address.
void	setMR (uint8_t mr)
	Set Mode Register.
uint8_t	getMR ()
	Get Mode Register.
void	setGAR (uint8_t *gar)
	Set gateway IP address.
void	getGAR (uint8_t *gar)
	Get gateway IP address.
void	setSUBR (uint8_t *subr)
	Set subnet mask address.
void	getSUBR (uint8_t *subr)
	Get subnet mask address.
void	setSHAR (uint8_t *shar)
	Set local MAC address.
void	getSHAR (uint8_t *shar)
	Get local MAC address.
void	setSIPR (uint8_t *sipr)
	Set local IP address.
void	getSIPR (uint8_t *sipr)
	Get local IP address.
void	setINTLEVEL (uint16_t intlevel)
	Set INTLEVEL register.
uint16_t	getINTLEVEL ()
	Get INTLEVEL register.
void	setIR (uint8_t ir)
	Set IR register.
uint8_t	getIR ()
	Get IR register.
void	setIMR (uint8_t imr)
	Set IMR register.
uint8_t	getIMR ()
	Get IMR register.
void	setSIR (uint8_t sir)
	Set SIR register.
uint8_t	getSIR ()
	Get SIR register.
void	setSIMR (uint8_t simr)
	Set SIMR register.
uint8_t	getSIMR ()
	Get SIMR register.
void	setRTR (uint16_t rtr)
	Set RTR register.
uint16_t	getRTR ()
	Get RTR register.
void	setRCR (uint8_t rcr)
	Set RCR register.
uint8_t	getRCR ()
	Get RCR register.
void	setPTIMER (uint8_t ptimer)
	Set PTIMER register.
uint8_t	getPTIMER ()
	Get PTIMER register.
void	setPMAGIC (uint8_t pmagic)
	Set PMAGIC register.
uint8_t	getPMAGIC (uint8_t pmagic)
	Get PMAGIC register.
void	setPHAR (uint8_t *phar)
	Set PHAR address.
void	getPHAR (uint8_t *phar)
	Get local IP address.
void	setPSID (uint16_t psid)
	Set PSID register.
uint16_t	getPSID ()
	Get PSID register.
void	setPMRU (uint16_t pmru)
	Set PMRU register.
uint16_t	getPMRU ()
	Get PMRU register.
void	getUIPR (uint8_t *uipr)
	Get unreachable IP address.
uint16_t	getUPORTR ()
	Get UPORTR register.
void	setPHYCFGR (uint8_t phycfgr)
	Set PHYCFGR register.
uint8_t	getPHYCFGR ()
	Get PHYCFGR register.
uint8_t	getVERSIONR ()
	Get VERSIONR register.
void	setSn_MR (uint8_t sn, uint8_t mr)
	Set Sn_MR register.
uint8_t	getSn_MR (uint8_t sn)
	Get Sn_MR register.
void	setSn_CR (uint8_t sn, uint8_t cr)
	Set Sn_CR register.
uint8_t	getSn_CR (uint8_t sn)
	Get Sn_CR register.
void	setSn_IR (uint8_t sn, uint8_t ir)
	Set Sn_IR register.
uint8_t	getSn_IR (uint8_t sn)
	Get Sn_IR register.
void	setSn_IMR (uint8_t sn, uint8_t imr)
	Set Sn_IMR register.
uint8_t	getSn_IMR (uint8_t sn)
	Get Sn_IMR register.
uint8_t	getSn_SR (uint8_t sn)
	Get Sn_SR register.
void	setSn_PORT (uint8_t sn, uint16_t port)
	Set Sn_PORT register.
uint16_t	getSn_PORT (uint8_t sn)
	Get Sn_PORT register.
void	setSn_DHAR (uint8_t sn, uint8_t *dhar)
	Set Sn_DHAR register.
void	getSn_DHAR (uint8_t sn, uint8_t *dhar)
	Get Sn_MR register.
void	setSn_DIPR (uint8_t sn, uint8_t *dipr)
	Set Sn_DIPR register.
void	getSn_DIPR (uint8_t sn, uint8_t *dipr)
	Get Sn_DIPR register.
void	setSn_DPORT (uint8_t sn, uint16_t dport)
	Set Sn_DPORT register.
uint16_t	getSn_DPORT (uint8_t sn)
	Get Sn_DPORT register.
void	setSn_MSSR (uint8_t sn, uint16_t mss)
	Set Sn_MSSR register.
uint16_t	getSn_MSSR (uint16_t sn)
	Get Sn_MSSR register.
void	setSn_TOS (uint8_t sn, uint8_t tos)
	Set Sn_TOS register.
uint8_t	getSn_TOS (uint8_t sn)
	Get Sn_TOS register.
void	setSn_TTL (uint8_t sn, uint8_t ttl)
	Set Sn_TTL register.
uint8_t	getSn_TTL (uint8_t sn)
	Get Sn_TTL register.
void	setSn_RXBUF_SIZE (uint8_t sn, uint8_t rxbufsize)
	Set Sn_RXBUF_SIZE register.
uint8_t	getSn_RXBUF_SIZE (uint8_t sn)
	Get Sn_RXBUF_SIZE register.
void	setSn_TXBUF_SIZE (uint8_t sn, uint8_t txbufsize)
	Set Sn_TXBUF_SIZE register.
uint8_t	getSn_TXBUF_SIZE (uint8_t sn)
	Get Sn_TXBUF_SIZE register.
uint16_t	getSn_TX_FSR (uint8_t sn)
	Get Sn_TX_FSR register.
uint16_t	getSn_TX_RD (uint8_t sn)
	Get Sn_TX_RD register.
void	setSn_TX_WR (uint8_t sn, uint16_t txwr)
	Set Sn_TX_WR register.
uint16_t	getSn_TX_WR (uint8_t sn)
	Get Sn_TX_WR register.
uint16_t	getSn_RX_RSR (uint8_t sn)
	Get Sn_RX_RSR register.
void	setSn_RX_RD (uint8_t sn, uint16_t rxrd)
	Set Sn_RX_RD register.
uint16_t	getSn_RX_RD (uint8_t sn)
	Get Sn_RX_RD register.
uint16_t	getSn_RX_WR (uint8_t sn)
	Get Sn_RX_WR register.
void	setSn_FRAG (uint8_t sn, uint16_t frag)
	Set Sn_FRAG register.
uint16_t	getSn_FRAG (uint8_t sn)
	Get Sn_FRAG register.
void	setSn_KPALVTR (uint8_t sn, uint8_t kpalvt)
	Set Sn_KPALVTR register.
uint8_t	getSn_KPALVTR (uint8_t sn)
	Get Sn_KPALVTR register.
uint16_t	getSn_RxMAX (uint8_t sn)
	Gets the max buffer size of socket sn passed as parameter.
uint16_t	getSn_TxMAX (uint8_t sn)
	Gets the max buffer size of socket sn passed as parameters.

Detailed Description

Interface using Wiznet W5500 chip to connect to an IP-based network.

Definition at line 11 of file EthernetInterface.h.

Constructor & Destructor Documentation

EthernetInterface	(	PinName	mosi,
		PinName	miso,
		PinName	sclk,
		PinName	cs,
		PinName	reset
	)

Constructor.

Parameters:

mosi	mbed pin to use for SPI
miso	mbed pin to use for SPI
sclk	mbed pin to use for SPI
cs	chip select of the WIZnet_Chip
reset	reset pin of the WIZnet_Chip

Definition at line 33 of file EthernetInterface.cpp.

Member Function Documentation

int connect ( )

Connect Bring the interface up, start DHCP if needed.

Returns:: 0 on success, a negative number on failure

Definition at line 108 of file EthernetInterface.cpp.

int disconnect ( )

Disconnect Bring the interface down.

Returns:: 0 on success, a negative number on failure

Definition at line 122 of file EthernetInterface.cpp.

void getGAR ( uint8_t * gar ) [inherited]

Get gateway IP address.

Parameters:

(uint8_t*)gar Pointer variable to get gateway IP address. It should be allocated 4 bytes.

See also:: setGAR()

Definition at line 423 of file W5500.h.

uint8_t getIMR ( ) [inherited]

Get IMR register.

Returns:: uint8_t. Value of IMR register.

See also:: setIMR()

Definition at line 545 of file W5500.h.

uint16_t getINTLEVEL ( ) [inherited]

Get INTLEVEL register.

Returns:: uint16_t. Value of INTLEVEL register.

See also:: setINTLEVEL()

Definition at line 505 of file W5500.h.

char * getIPAddress ( )

Get IP address.

@ returns ip address

Definition at line 136 of file EthernetInterface.cpp.

uint8_t getIR ( ) [inherited]

Get IR register.

Returns:: uint8_t. Value of IR register.

See also:: setIR()

Definition at line 525 of file W5500.h.

uint8_t getMR ( ) [inherited]

Get Mode Register.

Returns:: uint8_t. The value of Mode register.

See also:: setMR()

Definition at line 403 of file W5500.h.

void getPHAR ( uint8_t * phar ) [inherited]

Get local IP address.

Parameters:

(uint8_t*)phar Pointer variable to PPP destination MAC register address. It should be allocated 6 bytes.

See also:: setPHAR()

Definition at line 693 of file W5500.h.

uint8_t getPHYCFGR ( ) [inherited]

Get PHYCFGR register.

Returns:: uint8_t. Value of PHYCFGR register.

See also:: setPHYCFGR()

Definition at line 772 of file W5500.h.

uint8_t getPMAGIC ( uint8_t pmagic ) [inherited]

Get PMAGIC register.

Returns:: uint8_t. Value of PMAGIC register.

See also:: setPMAGIC()

Definition at line 674 of file W5500.h.

uint16_t getPMRU ( ) [inherited]

Get PMRU register.

Returns:: uint16_t. Value of PMRU register.

See also:: setPMRU()

Definition at line 734 of file W5500.h.

uint16_t getPSID ( ) [inherited]

Get PSID register.

Returns:: uint16_t. Value of PSID register.

See also:: setPSID()

Definition at line 714 of file W5500.h.

uint8_t getPTIMER ( ) [inherited]

Get PTIMER register.

Returns:: uint8_t. Value of PTIMER register.

See also:: setPTIMER()

Definition at line 647 of file W5500.h.

uint8_t getRCR ( ) [inherited]

Get RCR register.

Returns:: uint8_t. Value of RCR register.

See also:: setRCR()

Definition at line 625 of file W5500.h.

uint16_t getRTR ( ) [inherited]

Get RTR register.

Returns:: uint16_t. Value of RTR register.

See also:: setRTR()

Definition at line 605 of file W5500.h.

void getSHAR ( uint8_t * shar ) [inherited]

Get local MAC address.

Parameters:

(uint8_t*)shar Pointer variable to get local MAC address. It should be allocated 6 bytes.

See also:: setSHAR()

Definition at line 464 of file W5500.h.

uint8_t getSIMR ( ) [inherited]

Get SIMR register.

Returns:: uint8_t. Value of SIMR register.

See also:: setSIMR()

Definition at line 585 of file W5500.h.

void getSIPR ( uint8_t * sipr ) [inherited]

Get local IP address.

Parameters:

(uint8_t*)sipr Pointer variable to get local IP address. It should be allocated 4 bytes.

See also:: setSIPR()

Definition at line 484 of file W5500.h.

uint8_t getSIR ( ) [inherited]

Get SIR register.

Returns:: uint8_t. Value of SIR register.

See also:: setSIR()

Definition at line 566 of file W5500.h.

uint8_t getSn_CR ( uint8_t sn ) [inherited]

Get Sn_CR register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint8_t. Value of Sn_CR.

See also:: setSn_CR()

Definition at line 830 of file W5500.h.

void getSn_DHAR	(	uint8_t	sn,
		uint8_t *	dhar
	)		`[inherited]`

Get Sn_MR register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint8_t*)dhar	Pointer variable to get socket n destination hardware address. It should be allocated 6 bytes.

See also:: setSn_DHAR()

Definition at line 928 of file W5500.h.

void getSn_DIPR	(	uint8_t	sn,
		uint8_t *	dipr
	)		`[inherited]`

Get Sn_DIPR register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint8_t*)dipr	Pointer variable to get socket n destination IP address. It should be allocated 4 bytes.

See also:: SetSn_DIPR()

Definition at line 950 of file W5500.h.

uint16_t getSn_DPORT ( uint8_t sn ) [inherited]

Get Sn_DPORT register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint16_t. Value of Sn_DPORT.

See also:: setSn_DPORT()

Definition at line 972 of file W5500.h.

uint16_t getSn_FRAG ( uint8_t sn ) [inherited]

Get Sn_FRAG register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint16_t. Value of Sn_FRAG.

See also:: setSn_FRAG()

Definition at line 1195 of file W5500.h.

uint8_t getSn_IMR ( uint8_t sn ) [inherited]

Get Sn_IMR register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint8_t. Value of Sn_IMR.

See also:: setSn_IMR()

Definition at line 874 of file W5500.h.

uint8_t getSn_IR ( uint8_t sn ) [inherited]

Get Sn_IR register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint8_t. Value of Sn_IR.

See also:: setSn_IR()

Definition at line 852 of file W5500.h.

uint8_t getSn_KPALVTR ( uint8_t sn ) [inherited]

Get Sn_KPALVTR register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint8_t. Value of Sn_KPALVTR.

See also:: setSn_KPALVTR()

Definition at line 1217 of file W5500.h.

uint8_t getSn_MR ( uint8_t sn ) [inherited]

Get Sn_MR register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint8_t. Value of Sn_MR.

See also:: setSn_MR()

Definition at line 808 of file W5500.h.

uint16_t getSn_MSSR ( uint16_t sn ) [inherited]

Get Sn_MSSR register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint16_t. Value of Sn_MSSR.

See also:: setSn_MSSR()

Definition at line 994 of file W5500.h.

uint16_t getSn_PORT ( uint8_t sn ) [inherited]

Get Sn_PORT register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint16_t. Value of Sn_PORT.

See also:: setSn_PORT()

Definition at line 906 of file W5500.h.

uint16_t getSn_RX_RD ( uint8_t sn ) [inherited]

Get Sn_RX_RD register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7. uint16_t. Value of Sn_RX_RD.

See also:: setSn_RX_RD()

Definition at line 1162 of file W5500.h.

uint16_t getSn_RX_RSR ( uint8_t sn ) [inherited]

Get Sn_RX_RSR register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint16_t. Value of Sn_RX_RSR.

Definition at line 1139 of file W5500.h.

uint16_t getSn_RX_WR ( uint8_t sn ) [inherited]

Get Sn_RX_WR register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint16_t. Value of Sn_RX_WR.

Definition at line 1172 of file W5500.h.

uint8_t getSn_RXBUF_SIZE ( uint8_t sn ) [inherited]

Get Sn_RXBUF_SIZE register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint8_t. Value of Sn_RXBUF_SIZE.

See also:: setSn_RXBUF_SIZE()

Definition at line 1063 of file W5500.h.

uint16_t getSn_RxMAX ( uint8_t sn ) [inherited]

Gets the max buffer size of socket sn passed as parameter.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint16_t. Value of Socket n RX max buffer size.

Definition at line 1231 of file W5500.h.

uint8_t getSn_SR ( uint8_t sn ) [inherited]

Get Sn_SR register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint8_t. Value of Sn_SR.

Definition at line 884 of file W5500.h.

uint8_t getSn_TOS ( uint8_t sn ) [inherited]

Get Sn_TOS register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint8_t. Value of Sn_TOS.

See also:: setSn_TOS()

Definition at line 1016 of file W5500.h.

uint8_t getSn_TTL ( uint8_t sn ) [inherited]

Get Sn_TTL register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint8_t. Value of Sn_TTL.

See also:: setSn_TTL()

Definition at line 1039 of file W5500.h.

uint16_t getSn_TX_FSR ( uint8_t sn ) [inherited]

Get Sn_TX_FSR register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint16_t. Value of Sn_TX_FSR.

Definition at line 1095 of file W5500.h.

uint16_t getSn_TX_RD ( uint8_t sn ) [inherited]

Get Sn_TX_RD register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint16_t. Value of Sn_TX_RD.

Definition at line 1106 of file W5500.h.

uint16_t getSn_TX_WR ( uint8_t sn ) [inherited]

Get Sn_TX_WR register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint16_t. Value of Sn_TX_WR.

See also:: setSn_TX_WR()

Definition at line 1128 of file W5500.h.

uint8_t getSn_TXBUF_SIZE ( uint8_t sn ) [inherited]

Get Sn_TXBUF_SIZE register.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint8_t. Value of Sn_TXBUF_SIZE.

See also:: setSn_TXBUF_SIZE()

Definition at line 1085 of file W5500.h.

uint16_t getSn_TxMAX ( uint8_t sn ) [inherited]

Gets the max buffer size of socket sn passed as parameters.

Parameters:

(uint8_t)sn Socket number. It should be 0 ~ 7.

Returns:: uint16_t. Value of Socket n TX max buffer size.

Definition at line 1241 of file W5500.h.

void getSUBR ( uint8_t * subr ) [inherited]

Get subnet mask address.

Parameters:

(uint8_t*)subr Pointer variable to get subnet mask address. It should be allocated 4 bytes.

See also:: setSUBR()

Definition at line 444 of file W5500.h.

void getUIPR ( uint8_t * uipr ) [inherited]

Get unreachable IP address.

Parameters:

(uint8_t*)uipr Pointer variable to get unreachable IP address. It should be allocated 4 bytes.

Definition at line 743 of file W5500.h.

uint16_t getUPORTR ( ) [inherited]

Get UPORTR register.

Returns:: uint16_t. Value of UPORTR register.

Definition at line 752 of file W5500.h.

uint8_t getVERSIONR ( ) [inherited]

Get VERSIONR register.

Returns:: uint8_t. Value of VERSIONR register.

Definition at line 781 of file W5500.h.

int init	(	uint8_t *	mac,
		const char *	ip,
		const char *	mask,
		const char *	gateway
	)

Initialize the interface with a static IP address.

Initialize the interface and configure it with the following static configuration (no connection at this point).

Parameters:

mac	the MAC address to use
ip	the IP address to use
mask	the IP address mask
gateway	the gateway to use

Returns:: 0 on success, a negative number on failure

Definition at line 87 of file EthernetInterface.cpp.

int init ( )

Initialize the interface with DHCP w/o MAC address Initialize the interface and configure it to use DHCP (no connection at this point).

Returns:: 0 on success, a negative number on failure

Definition at line 46 of file EthernetInterface.cpp.

int init	(	const char *	ip,
		const char *	mask,
		const char *	gateway
	)

Initialize the interface with a static IP address without MAC.

Initialize the interface and configure it with the following static configuration (no connection at this point).

Parameters:

ip	the IP address to use
mask	the IP address mask
gateway	the gateway to use

Returns:: 0 on success, a negative number on failure

Definition at line 68 of file EthernetInterface.cpp.

int init ( uint8_t * mac )

Initialize the interface with DHCP.

Initialize the interface and configure it to use DHCP (no connection at this point).

Parameters:

mac	the MAC address to use

Returns:: 0 on success, a negative number on failure

Definition at line 56 of file EthernetInterface.cpp.

void setGAR ( uint8_t * gar ) [inherited]

Set gateway IP address.

Parameters:

(uint8_t*)gar Pointer variable to set gateway IP address. It should be allocated 4 bytes.

See also:: getGAR()

Definition at line 413 of file W5500.h.

void setIMR ( uint8_t imr ) [inherited]

Set IMR register.

Parameters:

(uint8_t)imr Value to set IMR register.

See also:: getIMR()

Definition at line 535 of file W5500.h.

void setINTLEVEL ( uint16_t intlevel ) [inherited]

Set INTLEVEL register.

Parameters:

(uint16_t)intlevel Value to set INTLEVEL register.

See also:: getINTLEVEL()

Definition at line 494 of file W5500.h.

void setIR ( uint8_t ir ) [inherited]

Set IR register.

Parameters:

(uint8_t)ir Value to set IR register.

See also:: getIR()

Definition at line 515 of file W5500.h.

void setMR ( uint8_t mr ) [inherited]

Set Mode Register.

Parameters:

(uint8_t)mr The value to be set.

See also:: getMR()

Definition at line 392 of file W5500.h.

void setPHAR ( uint8_t * phar ) [inherited]

Set PHAR address.

Parameters:

(uint8_t*)phar Pointer variable to set PPP destination MAC register address. It should be allocated 6 bytes.

See also:: getPHAR()

Definition at line 683 of file W5500.h.

void setPHYCFGR ( uint8_t phycfgr ) [inherited]

Set PHYCFGR register.

Parameters:

(uint8_t)phycfgr Value to set PHYCFGR register.

See also:: getPHYCFGR()

Definition at line 762 of file W5500.h.

void setPMAGIC ( uint8_t pmagic ) [inherited]

Set PMAGIC register.

Parameters:

(uint8_t)pmagic Value to set PMAGIC register.

See also:: getPMAGIC()

Definition at line 661 of file W5500.h.

void setPMRU ( uint16_t pmru ) [inherited]

Set PMRU register.

Parameters:

(uint16_t)pmru Value to set PMRU register.

See also:: getPMRU()

Definition at line 724 of file W5500.h.

void setPSID ( uint16_t psid ) [inherited]

Set PSID register.

Parameters:

(uint16_t)psid Value to set PSID register.

See also:: getPSID()

Definition at line 703 of file W5500.h.

void setPTIMER ( uint8_t ptimer ) [inherited]

Set PTIMER register.

Parameters:

(uint8_t)ptimer Value to set PTIMER register.

See also:: getPTIMER()

Definition at line 637 of file W5500.h.

void setRCR ( uint8_t rcr ) [inherited]

Set RCR register.

Parameters:

(uint8_t)rcr Value to set RCR register.

See also:: getRCR()

Definition at line 615 of file W5500.h.

void setRTR ( uint16_t rtr ) [inherited]

Set RTR register.

Parameters:

(uint16_t)rtr Value to set RTR register.

See also:: getRTR()

Definition at line 595 of file W5500.h.

void setSHAR ( uint8_t * shar ) [inherited]

Set local MAC address.

Parameters:

(uint8_t*)shar Pointer variable to set local MAC address. It should be allocated 6 bytes.

See also:: getSHAR()

Definition at line 454 of file W5500.h.

void setSIMR ( uint8_t simr ) [inherited]

Set SIMR register.

Parameters:

(uint8_t)simr Value to set SIMR register.

See also:: getSIMR()

Definition at line 575 of file W5500.h.

void setSIPR ( uint8_t * sipr ) [inherited]

Set local IP address.

Parameters:

(uint8_t*)sipr Pointer variable to set local IP address. It should be allocated 4 bytes.

See also:: getSIPR()

Definition at line 474 of file W5500.h.

void setSIR ( uint8_t sir ) [inherited]

Set SIR register.

Parameters:

(uint8_t)sir Value to set SIR register.

See also:: getSIR()

Definition at line 556 of file W5500.h.

void setSn_CR	(	uint8_t	sn,
		uint8_t	cr
	)		`[inherited]`

Set Sn_CR register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint8_t)cr	Value to set Sn_CR

See also:: getSn_CR()

Definition at line 819 of file W5500.h.

void setSn_DHAR	(	uint8_t	sn,
		uint8_t *	dhar
	)		`[inherited]`

Set Sn_DHAR register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint8_t*)dhar	Pointer variable to set socket n destination hardware address. It should be allocated 6 bytes.

See also:: getSn_DHAR()

Definition at line 917 of file W5500.h.

void setSn_DIPR	(	uint8_t	sn,
		uint8_t *	dipr
	)		`[inherited]`

Set Sn_DIPR register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint8_t*)dipr	Pointer variable to set socket n destination IP address. It should be allocated 4 bytes.

See also:: getSn_DIPR()

Definition at line 939 of file W5500.h.

void setSn_DPORT	(	uint8_t	sn,
		uint16_t	dport
	)		`[inherited]`

Set Sn_DPORT register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint16_t)dport	Value to set Sn_DPORT

See also:: getSn_DPORT()

Definition at line 961 of file W5500.h.

void setSn_FRAG	(	uint8_t	sn,
		uint16_t	frag
	)		`[inherited]`

Set Sn_FRAG register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint16_t)frag	Value to set Sn_FRAG

See also:: getSn_FRAD()

Definition at line 1184 of file W5500.h.

void setSn_IMR	(	uint8_t	sn,
		uint8_t	imr
	)		`[inherited]`

Set Sn_IMR register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint8_t)imr	Value to set Sn_IMR

See also:: getSn_IMR()

Definition at line 863 of file W5500.h.

void setSn_IR	(	uint8_t	sn,
		uint8_t	ir
	)		`[inherited]`

Set Sn_IR register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint8_t)ir	Value to set Sn_IR

See also:: getSn_IR()

Definition at line 841 of file W5500.h.

void setSn_KPALVTR	(	uint8_t	sn,
		uint8_t	kpalvt
	)		`[inherited]`

Set Sn_KPALVTR register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint8_t)kpalvt	Value to set Sn_KPALVTR

See also:: getSn_KPALVTR()

Definition at line 1206 of file W5500.h.

void setSn_MR	(	uint8_t	sn,
		uint8_t	mr
	)		`[inherited]`

Set Sn_MR register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint8_t)mr	Value to set Sn_MR

See also:: getSn_MR()

Definition at line 797 of file W5500.h.

void setSn_MSSR	(	uint8_t	sn,
		uint16_t	mss
	)		`[inherited]`

Set Sn_MSSR register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint16_t)mss	Value to set Sn_MSSR

See also:: setSn_MSSR()

Definition at line 983 of file W5500.h.

void setSn_PORT	(	uint8_t	sn,
		uint16_t	port
	)		`[inherited]`

Set Sn_PORT register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint16_t)port	Value to set Sn_PORT.

See also:: getSn_PORT()

Definition at line 895 of file W5500.h.

void setSn_RX_RD	(	uint8_t	sn,
		uint16_t	rxrd
	)		`[inherited]`

Set Sn_RX_RD register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint16_t)rxrd	Value to set Sn_RX_RD

See also:: getSn_RX_RD()

Definition at line 1151 of file W5500.h.

void setSn_RXBUF_SIZE	(	uint8_t	sn,
		uint8_t	rxbufsize
	)		`[inherited]`

Set Sn_RXBUF_SIZE register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint8_t)rxbufsize	Value to set Sn_RXBUF_SIZE

See also:: getSn_RXBUF_SIZE()

Definition at line 1051 of file W5500.h.

void setSn_TOS	(	uint8_t	sn,
		uint8_t	tos
	)		`[inherited]`

Set Sn_TOS register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint8_t)tos	Value to set Sn_TOS

See also:: getSn_TOS()

Definition at line 1005 of file W5500.h.

void setSn_TTL	(	uint8_t	sn,
		uint8_t	ttl
	)		`[inherited]`

Set Sn_TTL register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint8_t)ttl	Value to set Sn_TTL

See also:: getSn_TTL()

Definition at line 1027 of file W5500.h.

void setSn_TX_WR	(	uint8_t	sn,
		uint16_t	txwr
	)		`[inherited]`

Set Sn_TX_WR register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint16_t)txwr	Value to set Sn_TX_WR

See also:: GetSn_TX_WR()

Definition at line 1117 of file W5500.h.

void setSn_TXBUF_SIZE	(	uint8_t	sn,
		uint8_t	txbufsize
	)		`[inherited]`

Set Sn_TXBUF_SIZE register.

Parameters:

(uint8_t)sn	Socket number. It should be 0 ~ 7.
(uint8_t)txbufsize	Value to set Sn_TXBUF_SIZE

See also:: getSn_TXBUF_SIZE()

Definition at line 1074 of file W5500.h.

void setSUBR ( uint8_t * subr ) [inherited]

Set subnet mask address.

Parameters:

(uint8_t*)subr Pointer variable to set subnet mask address. It should be allocated 4 bytes.

See also:: getSUBR()

Definition at line 433 of file W5500.h.

Type:	Library
Created:	02 May 2019
Imports:	4
Forks:	0
Commits:	1
Dependents:	1
Dependencies:	0
Followers:	1

Important changes to repositories hosted on mbed.com

EthernetInterface Class Reference

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Repository toolbox

Repository details

Important Information for this Arm website

Important changes to repositories hosted on mbed.com

EthernetInterface Class Reference

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning