hsu han-lin
1.original from Cam Marshall 2.use for F446RE Test 3.use the interrupt method of uart 4.not change to RTOS yet
Dependents: RoboticArm Modbus_Gripper_Test
Revision 0:aefcdfe9ca2f, committed 2017-03-31
- Comitter:
- stanley1228
- Date:
- Fri Mar 31 01:47:35 2017 +0000
- Commit message:
- 1.change the file in "port" folder to F446RE use
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/functions/mbfunccoils.cpp Fri Mar 31 01:47:35 2017 +0000
@@ -0,0 +1,270 @@
+/*
+ * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
+ * Copyright (c) 2006 Christian Walter <wolti@sil.at>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * File: $Id: mbfunccoils.c,v 1.8 2007/02/18 23:47:16 wolti Exp $
+ */
+
+/* ----------------------- System includes ----------------------------------*/
+#include "stdlib.h"
+#include "string.h"
+
+/* ----------------------- Platform includes --------------------------------*/
+#include "port.h"
+
+/* ----------------------- Modbus includes ----------------------------------*/
+#include "mb.h"
+#include "mbframe.h"
+#include "mbproto.h"
+#include "mbconfig.h"
+
+/* ----------------------- Defines ------------------------------------------*/
+#define MB_PDU_FUNC_READ_ADDR_OFF ( MB_PDU_DATA_OFF )
+#define MB_PDU_FUNC_READ_COILCNT_OFF ( MB_PDU_DATA_OFF + 2 )
+#define MB_PDU_FUNC_READ_SIZE ( 4 )
+#define MB_PDU_FUNC_READ_COILCNT_MAX ( 0x07D0 )
+
+#define MB_PDU_FUNC_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF )
+#define MB_PDU_FUNC_WRITE_VALUE_OFF ( MB_PDU_DATA_OFF + 2 )
+#define MB_PDU_FUNC_WRITE_SIZE ( 4 )
+
+#define MB_PDU_FUNC_WRITE_MUL_ADDR_OFF ( MB_PDU_DATA_OFF )
+#define MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF ( MB_PDU_DATA_OFF + 2 )
+#define MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF ( MB_PDU_DATA_OFF + 4 )
+#define MB_PDU_FUNC_WRITE_MUL_VALUES_OFF ( MB_PDU_DATA_OFF + 5 )
+#define MB_PDU_FUNC_WRITE_MUL_SIZE_MIN ( 5 )
+#define MB_PDU_FUNC_WRITE_MUL_COILCNT_MAX ( 0x07B0 )
+
+/* ----------------------- Static functions ---------------------------------*/
+eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
+
+/* ----------------------- Start implementation -----------------------------*/
+
+#if MB_FUNC_READ_COILS_ENABLED > 0
+
+eMBException
+eMBFuncReadCoils( UCHAR * pucFrame, USHORT * usLen )
+{
+ USHORT usRegAddress;
+ USHORT usCoilCount;
+ UCHAR ucNBytes;
+ UCHAR *pucFrameCur;
+
+ eMBException eStatus = MB_EX_NONE;
+ eMBErrorCode eRegStatus;
+
+ if( *usLen == ( MB_PDU_FUNC_READ_SIZE + MB_PDU_SIZE_MIN ) )
+ {
+ usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF] << 8 );
+ usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF + 1] );
+ usRegAddress++;
+
+ usCoilCount = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_COILCNT_OFF] << 8 );
+ usCoilCount |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_COILCNT_OFF + 1] );
+
+ /* Check if the number of registers to read is valid. If not
+ * return Modbus illegal data value exception.
+ */
+ if( ( usCoilCount >= 1 ) &&
+ ( usCoilCount < MB_PDU_FUNC_READ_COILCNT_MAX ) )
+ {
+ /* Set the current PDU data pointer to the beginning. */
+ pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
+ *usLen = MB_PDU_FUNC_OFF;
+
+ /* First byte contains the function code. */
+ *pucFrameCur++ = MB_FUNC_READ_COILS;
+ *usLen += 1;
+
+ /* Test if the quantity of coils is a multiple of 8. If not last
+ * byte is only partially field with unused coils set to zero. */
+ if( ( usCoilCount & 0x0007 ) != 0 )
+ {
+ ucNBytes = ( UCHAR )( usCoilCount / 8 + 1 );
+ }
+ else
+ {
+ ucNBytes = ( UCHAR )( usCoilCount / 8 );
+ }
+ *pucFrameCur++ = ucNBytes;
+ *usLen += 1;
+
+ eRegStatus =
+ eMBRegCoilsCB( pucFrameCur, usRegAddress, usCoilCount,
+ MB_REG_READ );
+
+ /* If an error occured convert it into a Modbus exception. */
+ if( eRegStatus != MB_ENOERR )
+ {
+ eStatus = prveMBError2Exception( eRegStatus );
+ }
+ else
+ {
+ /* The response contains the function code, the starting address
+ * and the quantity of registers. We reuse the old values in the
+ * buffer because they are still valid. */
+ *usLen += ucNBytes;;
+ }
+ }
+ else
+ {
+ eStatus = MB_EX_ILLEGAL_DATA_VALUE;
+ }
+ }
+ else
+ {
+ /* Can't be a valid read coil register request because the length
+ * is incorrect. */
+ eStatus = MB_EX_ILLEGAL_DATA_VALUE;
+ }
+ return eStatus;
+}
+
+#if MB_FUNC_WRITE_COIL_ENABLED > 0
+eMBException
+eMBFuncWriteCoil( UCHAR * pucFrame, USHORT * usLen )
+{
+ USHORT usRegAddress;
+ UCHAR ucBuf[2];
+
+ eMBException eStatus = MB_EX_NONE;
+ eMBErrorCode eRegStatus;
+
+ if( *usLen == ( MB_PDU_FUNC_WRITE_SIZE + MB_PDU_SIZE_MIN ) )
+ {
+ usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF] << 8 );
+ usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF + 1] );
+ usRegAddress++;
+
+ if( ( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF + 1] == 0x00 ) &&
+ ( ( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0xFF ) ||
+ ( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0x00 ) ) )
+ {
+ ucBuf[1] = 0;
+ if( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0xFF )
+ {
+ ucBuf[0] = 1;
+ }
+ else
+ {
+ ucBuf[0] = 0;
+ }
+ eRegStatus =
+ eMBRegCoilsCB( &ucBuf[0], usRegAddress, 1, MB_REG_WRITE );
+
+ /* If an error occured convert it into a Modbus exception. */
+ if( eRegStatus != MB_ENOERR )
+ {
+ eStatus = prveMBError2Exception( eRegStatus );
+ }
+ }
+ else
+ {
+ eStatus = MB_EX_ILLEGAL_DATA_VALUE;
+ }
+ }
+ else
+ {
+ /* Can't be a valid write coil register request because the length
+ * is incorrect. */
+ eStatus = MB_EX_ILLEGAL_DATA_VALUE;
+ }
+ return eStatus;
+}
+
+#endif
+
+#if MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED > 0
+eMBException
+eMBFuncWriteMultipleCoils( UCHAR * pucFrame, USHORT * usLen )
+{
+ USHORT usRegAddress;
+ USHORT usCoilCnt;
+ UCHAR ucByteCount;
+ UCHAR ucByteCountVerify;
+
+ eMBException eStatus = MB_EX_NONE;
+ eMBErrorCode eRegStatus;
+
+ if( *usLen > ( MB_PDU_FUNC_WRITE_SIZE + MB_PDU_SIZE_MIN ) )
+ {
+ usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF] << 8 );
+ usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF + 1] );
+ usRegAddress++;
+
+ usCoilCnt = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF] << 8 );
+ usCoilCnt |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF + 1] );
+
+ ucByteCount = pucFrame[MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF];
+
+ /* Compute the number of expected bytes in the request. */
+ if( ( usCoilCnt & 0x0007 ) != 0 )
+ {
+ ucByteCountVerify = ( UCHAR )( usCoilCnt / 8 + 1 );
+ }
+ else
+ {
+ ucByteCountVerify = ( UCHAR )( usCoilCnt / 8 );
+ }
+
+ if( ( usCoilCnt >= 1 ) &&
+ ( usCoilCnt <= MB_PDU_FUNC_WRITE_MUL_COILCNT_MAX ) &&
+ ( ucByteCountVerify == ucByteCount ) )
+ {
+ eRegStatus =
+ eMBRegCoilsCB( &pucFrame[MB_PDU_FUNC_WRITE_MUL_VALUES_OFF],
+ usRegAddress, usCoilCnt, MB_REG_WRITE );
+
+ /* If an error occured convert it into a Modbus exception. */
+ if( eRegStatus != MB_ENOERR )
+ {
+ eStatus = prveMBError2Exception( eRegStatus );
+ }
+ else
+ {
+ /* The response contains the function code, the starting address
+ * and the quantity of registers. We reuse the old values in the
+ * buffer because they are still valid. */
+ *usLen = MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF;
+ }
+ }
+ else
+ {
+ eStatus = MB_EX_ILLEGAL_DATA_VALUE;
+ }
+ }
+ else
+ {
+ /* Can't be a valid write coil register request because the length
+ * is incorrect. */
+ eStatus = MB_EX_ILLEGAL_DATA_VALUE;
+ }
+ return eStatus;
+}
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/functions/mbfuncdiag.cpp Fri Mar 31 01:47:35 2017 +0000 @@ -0,0 +1,29 @@ +/* + * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU. + * Copyright (c) 2006 Christian Walter <wolti@sil.at> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * File: $Id: mbfuncdiag.c,v 1.3 2006/12/07 22:10:34 wolti Exp $ + */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/functions/mbfuncdisc.cpp Fri Mar 31 01:47:35 2017 +0000
@@ -0,0 +1,125 @@
+ /*
+ * FreeRTOS Modbus Libary: A Modbus serial implementation for FreeRTOS
+ * Copyright (C) 2006 Christian Walter <wolti@sil.at>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+
+/* ----------------------- System includes ----------------------------------*/
+#include "stdlib.h"
+#include "string.h"
+
+/* ----------------------- Platform includes --------------------------------*/
+#include "port.h"
+
+/* ----------------------- Modbus includes ----------------------------------*/
+#include "mb.h"
+#include "mbframe.h"
+#include "mbproto.h"
+#include "mbconfig.h"
+
+/* ----------------------- Defines ------------------------------------------*/
+#define MB_PDU_FUNC_READ_ADDR_OFF ( MB_PDU_DATA_OFF )
+#define MB_PDU_FUNC_READ_DISCCNT_OFF ( MB_PDU_DATA_OFF + 2 )
+#define MB_PDU_FUNC_READ_SIZE ( 4 )
+#define MB_PDU_FUNC_READ_DISCCNT_MAX ( 0x07D0 )
+
+/* ----------------------- Static functions ---------------------------------*/
+eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
+
+/* ----------------------- Start implementation -----------------------------*/
+
+#if MB_FUNC_READ_COILS_ENABLED > 0
+
+eMBException
+eMBFuncReadDiscreteInputs( UCHAR * pucFrame, USHORT * usLen )
+{
+ USHORT usRegAddress;
+ USHORT usDiscreteCnt;
+ UCHAR ucNBytes;
+ UCHAR *pucFrameCur;
+
+ eMBException eStatus = MB_EX_NONE;
+ eMBErrorCode eRegStatus;
+
+ if( *usLen == ( MB_PDU_FUNC_READ_SIZE + MB_PDU_SIZE_MIN ) )
+ {
+ usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF] << 8 );
+ usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF + 1] );
+ usRegAddress++;
+
+ usDiscreteCnt = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_DISCCNT_OFF] << 8 );
+ usDiscreteCnt |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_DISCCNT_OFF + 1] );
+
+ /* Check if the number of registers to read is valid. If not
+ * return Modbus illegal data value exception.
+ */
+ if( ( usDiscreteCnt >= 1 ) &&
+ ( usDiscreteCnt < MB_PDU_FUNC_READ_DISCCNT_MAX ) )
+ {
+ /* Set the current PDU data pointer to the beginning. */
+ pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
+ *usLen = MB_PDU_FUNC_OFF;
+
+ /* First byte contains the function code. */
+ *pucFrameCur++ = MB_FUNC_READ_DISCRETE_INPUTS;
+ *usLen += 1;
+
+ /* Test if the quantity of coils is a multiple of 8. If not last
+ * byte is only partially field with unused coils set to zero. */
+ if( ( usDiscreteCnt & 0x0007 ) != 0 )
+ {
+ ucNBytes = ( UCHAR ) ( usDiscreteCnt / 8 + 1 );
+ }
+ else
+ {
+ ucNBytes = ( UCHAR ) ( usDiscreteCnt / 8 );
+ }
+ *pucFrameCur++ = ucNBytes;
+ *usLen += 1;
+
+ eRegStatus =
+ eMBRegDiscreteCB( pucFrameCur, usRegAddress, usDiscreteCnt );
+
+ /* If an error occured convert it into a Modbus exception. */
+ if( eRegStatus != MB_ENOERR )
+ {
+ eStatus = prveMBError2Exception( eRegStatus );
+ }
+ else
+ {
+ /* The response contains the function code, the starting address
+ * and the quantity of registers. We reuse the old values in the
+ * buffer because they are still valid. */
+ *usLen += ucNBytes;;
+ }
+ }
+ else
+ {
+ eStatus = MB_EX_ILLEGAL_DATA_VALUE;
+ }
+ }
+ else
+ {
+ /* Can't be a valid read coil register request because the length
+ * is incorrect. */
+ eStatus = MB_EX_ILLEGAL_DATA_VALUE;
+ }
+ return eStatus;
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/functions/mbfuncholding.cpp Fri Mar 31 01:47:35 2017 +0000
@@ -0,0 +1,308 @@
+/*
+ * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
+ * Copyright (c) 2006 Christian Walter <wolti@sil.at>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * File: $Id: mbfuncholding.c,v 1.12 2007/02/18 23:48:22 wolti Exp $
+ */
+
+/* ----------------------- System includes ----------------------------------*/
+#include "stdlib.h"
+#include "string.h"
+
+/* ----------------------- Platform includes --------------------------------*/
+#include "port.h"
+
+/* ----------------------- Modbus includes ----------------------------------*/
+#include "mb.h"
+#include "mbframe.h"
+#include "mbproto.h"
+#include "mbconfig.h"
+
+/* ----------------------- Defines ------------------------------------------*/
+#define MB_PDU_FUNC_READ_ADDR_OFF ( MB_PDU_DATA_OFF + 0)
+#define MB_PDU_FUNC_READ_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
+#define MB_PDU_FUNC_READ_SIZE ( 4 )
+#define MB_PDU_FUNC_READ_REGCNT_MAX ( 0x007D )
+
+#define MB_PDU_FUNC_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF + 0)
+#define MB_PDU_FUNC_WRITE_VALUE_OFF ( MB_PDU_DATA_OFF + 2 )
+#define MB_PDU_FUNC_WRITE_SIZE ( 4 )
+
+#define MB_PDU_FUNC_WRITE_MUL_ADDR_OFF ( MB_PDU_DATA_OFF + 0 )
+#define MB_PDU_FUNC_WRITE_MUL_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
+#define MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF ( MB_PDU_DATA_OFF + 4 )
+#define MB_PDU_FUNC_WRITE_MUL_VALUES_OFF ( MB_PDU_DATA_OFF + 5 )
+#define MB_PDU_FUNC_WRITE_MUL_SIZE_MIN ( 5 )
+#define MB_PDU_FUNC_WRITE_MUL_REGCNT_MAX ( 0x0078 )
+
+#define MB_PDU_FUNC_READWRITE_READ_ADDR_OFF ( MB_PDU_DATA_OFF + 0 )
+#define MB_PDU_FUNC_READWRITE_READ_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
+#define MB_PDU_FUNC_READWRITE_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF + 4 )
+#define MB_PDU_FUNC_READWRITE_WRITE_REGCNT_OFF ( MB_PDU_DATA_OFF + 6 )
+#define MB_PDU_FUNC_READWRITE_BYTECNT_OFF ( MB_PDU_DATA_OFF + 8 )
+#define MB_PDU_FUNC_READWRITE_WRITE_VALUES_OFF ( MB_PDU_DATA_OFF + 9 )
+#define MB_PDU_FUNC_READWRITE_SIZE_MIN ( 9 )
+
+/* ----------------------- Static functions ---------------------------------*/
+eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
+
+/* ----------------------- Start implementation -----------------------------*/
+
+#if MB_FUNC_WRITE_HOLDING_ENABLED > 0
+
+eMBException
+eMBFuncWriteHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
+{
+ USHORT usRegAddress;
+ eMBException eStatus = MB_EX_NONE;
+ eMBErrorCode eRegStatus;
+
+ if( *usLen == ( MB_PDU_FUNC_WRITE_SIZE + MB_PDU_SIZE_MIN ) )
+ {
+ usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF] << 8 );
+ usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF + 1] );
+ usRegAddress++;
+
+ /* Make callback to update the value. */
+ eRegStatus = eMBRegHoldingCB( &pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF],
+ usRegAddress, 1, MB_REG_WRITE );
+
+ /* If an error occured convert it into a Modbus exception. */
+ if( eRegStatus != MB_ENOERR )
+ {
+ eStatus = prveMBError2Exception( eRegStatus );
+ }
+ }
+ else
+ {
+ /* Can't be a valid request because the length is incorrect. */
+ eStatus = MB_EX_ILLEGAL_DATA_VALUE;
+ }
+ return eStatus;
+}
+#endif
+
+#if MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED > 0
+eMBException
+eMBFuncWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
+{
+ USHORT usRegAddress;
+ USHORT usRegCount;
+ UCHAR ucRegByteCount;
+
+ eMBException eStatus = MB_EX_NONE;
+ eMBErrorCode eRegStatus;
+
+ if( *usLen >= ( MB_PDU_FUNC_WRITE_MUL_SIZE_MIN + MB_PDU_SIZE_MIN ) )
+ {
+ usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF] << 8 );
+ usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF + 1] );
+ usRegAddress++;
+
+ usRegCount = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_REGCNT_OFF] << 8 );
+ usRegCount |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_REGCNT_OFF + 1] );
+
+ ucRegByteCount = pucFrame[MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF];
+
+ if( ( usRegCount >= 1 ) &&
+ ( usRegCount <= MB_PDU_FUNC_WRITE_MUL_REGCNT_MAX ) &&
+ ( ucRegByteCount == ( UCHAR ) ( 2 * usRegCount ) ) )
+ {
+ /* Make callback to update the register values. */
+ eRegStatus =
+ eMBRegHoldingCB( &pucFrame[MB_PDU_FUNC_WRITE_MUL_VALUES_OFF],
+ usRegAddress, usRegCount, MB_REG_WRITE );
+
+ /* If an error occured convert it into a Modbus exception. */
+ if( eRegStatus != MB_ENOERR )
+ {
+ eStatus = prveMBError2Exception( eRegStatus );
+ }
+ else
+ {
+ /* The response contains the function code, the starting
+ * address and the quantity of registers. We reuse the
+ * old values in the buffer because they are still valid.
+ */
+ *usLen = MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF;
+ }
+ }
+ else
+ {
+ eStatus = MB_EX_ILLEGAL_DATA_VALUE;
+ }
+ }
+ else
+ {
+ /* Can't be a valid request because the length is incorrect. */
+ eStatus = MB_EX_ILLEGAL_DATA_VALUE;
+ }
+ return eStatus;
+}
+#endif
+
+#if MB_FUNC_READ_HOLDING_ENABLED > 0
+
+eMBException
+eMBFuncReadHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
+{
+ USHORT usRegAddress;
+ USHORT usRegCount;
+ UCHAR *pucFrameCur;
+
+ eMBException eStatus = MB_EX_NONE;
+ eMBErrorCode eRegStatus;
+
+ if( *usLen == ( MB_PDU_FUNC_READ_SIZE + MB_PDU_SIZE_MIN ) )
+ {
+ usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF] << 8 );
+ usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF + 1] );
+ usRegAddress++;
+
+ usRegCount = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_REGCNT_OFF] << 8 );
+ usRegCount = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_REGCNT_OFF + 1] );
+
+ /* Check if the number of registers to read is valid. If not
+ * return Modbus illegal data value exception.
+ */
+ if( ( usRegCount >= 1 ) && ( usRegCount <= MB_PDU_FUNC_READ_REGCNT_MAX ) )
+ {
+ /* Set the current PDU data pointer to the beginning. */
+ pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
+ *usLen = MB_PDU_FUNC_OFF;
+
+ /* First byte contains the function code. */
+ *pucFrameCur++ = MB_FUNC_READ_HOLDING_REGISTER;
+ *usLen += 1;
+
+ /* Second byte in the response contain the number of bytes. */
+ *pucFrameCur++ = ( UCHAR ) ( usRegCount * 2 );
+ *usLen += 1;
+
+ /* Make callback to fill the buffer. */
+ eRegStatus = eMBRegHoldingCB( pucFrameCur, usRegAddress, usRegCount, MB_REG_READ );
+ /* If an error occured convert it into a Modbus exception. */
+ if( eRegStatus != MB_ENOERR )
+ {
+ eStatus = prveMBError2Exception( eRegStatus );
+ }
+ else
+ {
+ *usLen += usRegCount * 2;
+ }
+ }
+ else
+ {
+ eStatus = MB_EX_ILLEGAL_DATA_VALUE;
+ }
+ }
+ else
+ {
+ /* Can't be a valid request because the length is incorrect. */
+ eStatus = MB_EX_ILLEGAL_DATA_VALUE;
+ }
+ return eStatus;
+}
+
+#endif
+
+#if MB_FUNC_READWRITE_HOLDING_ENABLED > 0
+
+eMBException
+eMBFuncReadWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
+{
+ USHORT usRegReadAddress;
+ USHORT usRegReadCount;
+ USHORT usRegWriteAddress;
+ USHORT usRegWriteCount;
+ UCHAR ucRegWriteByteCount;
+ UCHAR *pucFrameCur;
+
+ eMBException eStatus = MB_EX_NONE;
+ eMBErrorCode eRegStatus;
+
+ if( *usLen >= ( MB_PDU_FUNC_READWRITE_SIZE_MIN + MB_PDU_SIZE_MIN ) )
+ {
+ usRegReadAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_READ_ADDR_OFF] << 8U );
+ usRegReadAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_READ_ADDR_OFF + 1] );
+ usRegReadAddress++;
+
+ usRegReadCount = ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_READ_REGCNT_OFF] << 8U );
+ usRegReadCount |= ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_READ_REGCNT_OFF + 1] );
+
+ usRegWriteAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_WRITE_ADDR_OFF] << 8U );
+ usRegWriteAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_WRITE_ADDR_OFF + 1] );
+ usRegWriteAddress++;
+
+ usRegWriteCount = ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_WRITE_REGCNT_OFF] << 8U );
+ usRegWriteCount |= ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_WRITE_REGCNT_OFF + 1] );
+
+ ucRegWriteByteCount = pucFrame[MB_PDU_FUNC_READWRITE_BYTECNT_OFF];
+
+ if( ( usRegReadCount >= 1 ) && ( usRegReadCount <= 0x7D ) &&
+ ( usRegWriteCount >= 1 ) && ( usRegWriteCount <= 0x79 ) &&
+ ( ( 2 * usRegWriteCount ) == ucRegWriteByteCount ) )
+ {
+ /* Make callback to update the register values. */
+ eRegStatus = eMBRegHoldingCB( &pucFrame[MB_PDU_FUNC_READWRITE_WRITE_VALUES_OFF],
+ usRegWriteAddress, usRegWriteCount, MB_REG_WRITE );
+
+ if( eRegStatus == MB_ENOERR )
+ {
+ /* Set the current PDU data pointer to the beginning. */
+ pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
+ *usLen = MB_PDU_FUNC_OFF;
+
+ /* First byte contains the function code. */
+ *pucFrameCur++ = MB_FUNC_READWRITE_MULTIPLE_REGISTERS;
+ *usLen += 1;
+
+ /* Second byte in the response contain the number of bytes. */
+ *pucFrameCur++ = ( UCHAR ) ( usRegReadCount * 2 );
+ *usLen += 1;
+
+ /* Make the read callback. */
+ eRegStatus =
+ eMBRegHoldingCB( pucFrameCur, usRegReadAddress, usRegReadCount, MB_REG_READ );
+ if( eRegStatus == MB_ENOERR )
+ {
+ *usLen += 2 * usRegReadCount;
+ }
+ }
+ if( eRegStatus != MB_ENOERR )
+ {
+ eStatus = prveMBError2Exception( eRegStatus );
+ }
+ }
+ else
+ {
+ eStatus = MB_EX_ILLEGAL_DATA_VALUE;
+ }
+ }
+ return eStatus;
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/functions/mbfuncinput.cpp Fri Mar 31 01:47:35 2017 +0000
@@ -0,0 +1,121 @@
+/*
+ * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
+ * Copyright (c) 2006 Christian Walter <wolti@sil.at>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * File: $Id: mbfuncinput.c,v 1.10 2007/09/12 10:15:56 wolti Exp $
+ */
+
+/* ----------------------- System includes ----------------------------------*/
+#include "stdlib.h"
+#include "string.h"
+
+/* ----------------------- Platform includes --------------------------------*/
+#include "port.h"
+
+/* ----------------------- Modbus includes ----------------------------------*/
+#include "mb.h"
+#include "mbframe.h"
+#include "mbproto.h"
+#include "mbconfig.h"
+
+/* ----------------------- Defines ------------------------------------------*/
+#define MB_PDU_FUNC_READ_ADDR_OFF ( MB_PDU_DATA_OFF )
+#define MB_PDU_FUNC_READ_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
+#define MB_PDU_FUNC_READ_SIZE ( 4 )
+#define MB_PDU_FUNC_READ_REGCNT_MAX ( 0x007D )
+
+#define MB_PDU_FUNC_READ_RSP_BYTECNT_OFF ( MB_PDU_DATA_OFF )
+
+/* ----------------------- Static functions ---------------------------------*/
+eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
+
+/* ----------------------- Start implementation -----------------------------*/
+#if MB_FUNC_READ_INPUT_ENABLED > 0
+
+eMBException
+eMBFuncReadInputRegister( UCHAR * pucFrame, USHORT * usLen )
+{
+ USHORT usRegAddress;
+ USHORT usRegCount;
+ UCHAR *pucFrameCur;
+
+ eMBException eStatus = MB_EX_NONE;
+ eMBErrorCode eRegStatus;
+
+ if( *usLen == ( MB_PDU_FUNC_READ_SIZE + MB_PDU_SIZE_MIN ) )
+ {
+ usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF] << 8 );
+ usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF + 1] );
+ usRegAddress++;
+
+ usRegCount = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_REGCNT_OFF] << 8 );
+ usRegCount |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_REGCNT_OFF + 1] );
+
+ /* Check if the number of registers to read is valid. If not
+ * return Modbus illegal data value exception.
+ */
+ if( ( usRegCount >= 1 )
+ && ( usRegCount < MB_PDU_FUNC_READ_REGCNT_MAX ) )
+ {
+ /* Set the current PDU data pointer to the beginning. */
+ pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
+ *usLen = MB_PDU_FUNC_OFF;
+
+ /* First byte contains the function code. */
+ *pucFrameCur++ = MB_FUNC_READ_INPUT_REGISTER;
+ *usLen += 1;
+
+ /* Second byte in the response contain the number of bytes. */
+ *pucFrameCur++ = ( UCHAR )( usRegCount * 2 );
+ *usLen += 1;
+
+ eRegStatus = eMBRegInputCB( pucFrameCur, usRegAddress, usRegCount );
+
+ /* If an error occured convert it into a Modbus exception. */
+ if( eRegStatus != MB_ENOERR )
+ {
+ eStatus = prveMBError2Exception( eRegStatus );
+ }
+ else
+ {
+ *usLen += usRegCount * 2;
+ }
+ }
+ else
+ {
+ eStatus = MB_EX_ILLEGAL_DATA_VALUE;
+ }
+ }
+ else
+ {
+ /* Can't be a valid read input register request because the length
+ * is incorrect. */
+ eStatus = MB_EX_ILLEGAL_DATA_VALUE;
+ }
+ return eStatus;
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/functions/mbfuncother.cpp Fri Mar 31 01:47:35 2017 +0000
@@ -0,0 +1,88 @@
+/*
+ * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
+ * Copyright (c) 2006 Christian Walter <wolti@sil.at>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * File: $Id: mbfuncother.c,v 1.8 2006/12/07 22:10:34 wolti Exp $
+ */
+
+/* ----------------------- System includes ----------------------------------*/
+#include "stdlib.h"
+#include "string.h"
+
+/* ----------------------- Platform includes --------------------------------*/
+#include "port.h"
+
+/* ----------------------- Modbus includes ----------------------------------*/
+#include "mb.h"
+#include "mbframe.h"
+#include "mbproto.h"
+#include "mbconfig.h"
+
+#if MB_FUNC_OTHER_REP_SLAVEID_ENABLED > 0
+
+/* ----------------------- Static variables ---------------------------------*/
+static UCHAR ucMBSlaveID[MB_FUNC_OTHER_REP_SLAVEID_BUF];
+static USHORT usMBSlaveIDLen;
+
+/* ----------------------- Start implementation -----------------------------*/
+
+eMBErrorCode
+eMBSetSlaveID( UCHAR ucSlaveID, BOOL xIsRunning,
+ UCHAR const *pucAdditional, USHORT usAdditionalLen )
+{
+ eMBErrorCode eStatus = MB_ENOERR;
+
+ /* the first byte and second byte in the buffer is reserved for
+ * the parameter ucSlaveID and the running flag. The rest of
+ * the buffer is available for additional data. */
+ if( usAdditionalLen + 2 < MB_FUNC_OTHER_REP_SLAVEID_BUF )
+ {
+ usMBSlaveIDLen = 0;
+ ucMBSlaveID[usMBSlaveIDLen++] = ucSlaveID;
+ ucMBSlaveID[usMBSlaveIDLen++] = ( UCHAR )( xIsRunning ? 0xFF : 0x00 );
+ if( usAdditionalLen > 0 )
+ {
+ memcpy( &ucMBSlaveID[usMBSlaveIDLen], pucAdditional,
+ ( size_t )usAdditionalLen );
+ usMBSlaveIDLen += usAdditionalLen;
+ }
+ }
+ else
+ {
+ eStatus = MB_ENORES;
+ }
+ return eStatus;
+}
+
+eMBException
+eMBFuncReportSlaveID( UCHAR * pucFrame, USHORT * usLen )
+{
+ memcpy( &pucFrame[MB_PDU_DATA_OFF], &ucMBSlaveID[0], ( size_t )usMBSlaveIDLen );
+ *usLen = ( USHORT )( MB_PDU_DATA_OFF + usMBSlaveIDLen );
+ return MB_EX_NONE;
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/functions/mbutils.cpp Fri Mar 31 01:47:35 2017 +0000
@@ -0,0 +1,141 @@
+/*
+ * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
+ * Copyright (c) 2006 Christian Walter <wolti@sil.at>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * File: $Id: mbutils.c,v 1.6 2007/02/18 23:49:07 wolti Exp $
+ */
+
+/* ----------------------- System includes ----------------------------------*/
+#include "stdlib.h"
+#include "string.h"
+
+/* ----------------------- Platform includes --------------------------------*/
+#include "port.h"
+
+/* ----------------------- Modbus includes ----------------------------------*/
+#include "mb.h"
+#include "mbproto.h"
+
+/* ----------------------- Defines ------------------------------------------*/
+#define BITS_UCHAR 8U
+
+/* ----------------------- Start implementation -----------------------------*/
+void
+xMBUtilSetBits( UCHAR * ucByteBuf, USHORT usBitOffset, UCHAR ucNBits,
+ UCHAR ucValue )
+{
+ USHORT usWordBuf;
+ USHORT usMask;
+ USHORT usByteOffset;
+ USHORT usNPreBits;
+ USHORT usValue = ucValue;
+
+ assert( ucNBits <= 8 );
+ assert( ( size_t )BITS_UCHAR == sizeof( UCHAR ) * 8 );
+
+ /* Calculate byte offset for first byte containing the bit values starting
+ * at usBitOffset. */
+ usByteOffset = ( USHORT )( ( usBitOffset ) / BITS_UCHAR );
+
+ /* How many bits precede our bits to set. */
+ usNPreBits = ( USHORT )( usBitOffset - usByteOffset * BITS_UCHAR );
+
+ /* Move bit field into position over bits to set */
+ usValue <<= usNPreBits;
+
+ /* Prepare a mask for setting the new bits. */
+ usMask = ( USHORT )( ( 1 << ( USHORT ) ucNBits ) - 1 );
+ usMask <<= usBitOffset - usByteOffset * BITS_UCHAR;
+
+ /* copy bits into temporary storage. */
+ usWordBuf = ucByteBuf[usByteOffset];
+ usWordBuf |= ucByteBuf[usByteOffset + 1] << BITS_UCHAR;
+
+ /* Zero out bit field bits and then or value bits into them. */
+ usWordBuf = ( USHORT )( ( usWordBuf & ( ~usMask ) ) | usValue );
+
+ /* move bits back into storage */
+ ucByteBuf[usByteOffset] = ( UCHAR )( usWordBuf & 0xFF );
+ ucByteBuf[usByteOffset + 1] = ( UCHAR )( usWordBuf >> BITS_UCHAR );
+}
+
+UCHAR
+xMBUtilGetBits( UCHAR * ucByteBuf, USHORT usBitOffset, UCHAR ucNBits )
+{
+ USHORT usWordBuf;
+ USHORT usMask;
+ USHORT usByteOffset;
+ USHORT usNPreBits;
+
+ /* Calculate byte offset for first byte containing the bit values starting
+ * at usBitOffset. */
+ usByteOffset = ( USHORT )( ( usBitOffset ) / BITS_UCHAR );
+
+ /* How many bits precede our bits to set. */
+ usNPreBits = ( USHORT )( usBitOffset - usByteOffset * BITS_UCHAR );
+
+ /* Prepare a mask for setting the new bits. */
+ usMask = ( USHORT )( ( 1 << ( USHORT ) ucNBits ) - 1 );
+
+ /* copy bits into temporary storage. */
+ usWordBuf = ucByteBuf[usByteOffset];
+ usWordBuf |= ucByteBuf[usByteOffset + 1] << BITS_UCHAR;
+
+ /* throw away unneeded bits. */
+ usWordBuf >>= usNPreBits;
+
+ /* mask away bits above the requested bitfield. */
+ usWordBuf &= usMask;
+
+ return ( UCHAR ) usWordBuf;
+}
+
+eMBException
+prveMBError2Exception( eMBErrorCode eErrorCode )
+{
+ eMBException eStatus;
+
+ switch ( eErrorCode )
+ {
+ case MB_ENOERR:
+ eStatus = MB_EX_NONE;
+ break;
+
+ case MB_ENOREG:
+ eStatus = MB_EX_ILLEGAL_DATA_ADDRESS;
+ break;
+
+ case MB_ETIMEDOUT:
+ eStatus = MB_EX_SLAVE_BUSY;
+ break;
+
+ default:
+ eStatus = MB_EX_SLAVE_DEVICE_FAILURE;
+ break;
+ }
+
+ return eStatus;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/include/mb.h Fri Mar 31 01:47:35 2017 +0000
@@ -0,0 +1,417 @@
+/*
+ * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
+ * Copyright (c) 2006 Christian Walter <wolti@sil.at>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * File: $Id: mb.h,v 1.17 2006/12/07 22:10:34 wolti Exp $
+ */
+
+#ifndef _MB_H
+#define _MB_H
+
+#include "port.h"
+
+#ifdef __cplusplus
+PR_BEGIN_EXTERN_C
+#endif
+
+#include "mbport.h"
+#include "mbproto.h"
+
+/*! \defgroup modbus Modbus
+ * \code #include "mb.h" \endcode
+ *
+ * This module defines the interface for the application. It contains
+ * the basic functions and types required to use the Modbus protocol stack.
+ * A typical application will want to call eMBInit() first. If the device
+ * is ready to answer network requests it must then call eMBEnable() to activate
+ * the protocol stack. In the main loop the function eMBPoll() must be called
+ * periodically. The time interval between pooling depends on the configured
+ * Modbus timeout. If an RTOS is available a separate task should be created
+ * and the task should always call the function eMBPoll().
+ *
+ * \code
+ * // Initialize protocol stack in RTU mode for a slave with address 10 = 0x0A
+ * eMBInit( MB_RTU, 0x0A, 38400, MB_PAR_EVEN );
+ * // Enable the Modbus Protocol Stack.
+ * eMBEnable( );
+ * for( ;; )
+ * {
+ * // Call the main polling loop of the Modbus protocol stack.
+ * eMBPoll( );
+ * ...
+ * }
+ * \endcode
+ */
+
+/* ----------------------- Defines ------------------------------------------*/
+
+/*! \ingroup modbus
+ * \brief Use the default Modbus TCP port (502)
+ */
+#define MB_TCP_PORT_USE_DEFAULT 0
+
+/* ----------------------- Type definitions ---------------------------------*/
+
+/*! \ingroup modbus
+ * \brief Modbus serial transmission modes (RTU/ASCII).
+ *
+ * Modbus serial supports two transmission modes. Either ASCII or RTU. RTU
+ * is faster but has more hardware requirements and requires a network with
+ * a low jitter. ASCII is slower and more reliable on slower links (E.g. modems)
+ */
+ typedef enum
+{
+ MB_RTU, /*!< RTU transmission mode. */
+ MB_ASCII, /*!< ASCII transmission mode. */
+ MB_TCP /*!< TCP mode. */
+} eMBMode;
+
+/*! \ingroup modbus
+ * \brief If register should be written or read.
+ *
+ * This value is passed to the callback functions which support either
+ * reading or writing register values. Writing means that the application
+ * registers should be updated and reading means that the modbus protocol
+ * stack needs to know the current register values.
+ *
+ * \see eMBRegHoldingCB( ), eMBRegCoilsCB( ), eMBRegDiscreteCB( ) and
+ * eMBRegInputCB( ).
+ */
+typedef enum
+{
+ MB_REG_READ, /*!< Read register values and pass to protocol stack. */
+ MB_REG_WRITE /*!< Update register values. */
+} eMBRegisterMode;
+
+/*! \ingroup modbus
+ * \brief Errorcodes used by all function in the protocol stack.
+ */
+typedef enum
+{
+ MB_ENOERR, /*!< no error. */
+ MB_ENOREG, /*!< illegal register address. */
+ MB_EINVAL, /*!< illegal argument. */
+ MB_EPORTERR, /*!< porting layer error. */
+ MB_ENORES, /*!< insufficient resources. */
+ MB_EIO, /*!< I/O error. */
+ MB_EILLSTATE, /*!< protocol stack in illegal state. */
+ MB_ETIMEDOUT /*!< timeout error occurred. */
+} eMBErrorCode;
+
+
+/* ----------------------- Function prototypes ------------------------------*/
+/*! \ingroup modbus
+ * \brief Initialize the Modbus protocol stack.
+ *
+ * This functions initializes the ASCII or RTU module and calls the
+ * init functions of the porting layer to prepare the hardware. Please
+ * note that the receiver is still disabled and no Modbus frames are
+ * processed until eMBEnable( ) has been called.
+ *
+ * \param eMode If ASCII or RTU mode should be used.
+ * \param ucSlaveAddress The slave address. Only frames sent to this
+ * address or to the broadcast address are processed.
+ * \param ucPort The port to use. E.g. 1 for COM1 on windows. This value
+ * is platform dependent and some ports simply choose to ignore it.
+ * \param ulBaudRate The baudrate. E.g. 19200. Supported baudrates depend
+ * on the porting layer.
+ * \param eParity Parity used for serial transmission.
+ *
+ * \return If no error occurs the function returns eMBErrorCode::MB_ENOERR.
+ * The protocol is then in the disabled state and ready for activation
+ * by calling eMBEnable( ). Otherwise one of the following error codes
+ * is returned:
+ * - eMBErrorCode::MB_EINVAL If the slave address was not valid. Valid
+ * slave addresses are in the range 1 - 247.
+ * - eMBErrorCode::MB_EPORTERR IF the porting layer returned an error.
+ */
+eMBErrorCode eMBInit( eMBMode eMode, UCHAR ucSlaveAddress,
+ UCHAR ucPort, ULONG ulBaudRate, eMBParity eParity );
+
+/*! \ingroup modbus
+ * \brief Initialize the Modbus protocol stack for Modbus TCP.
+ *
+ * This function initializes the Modbus TCP Module. Please note that
+ * frame processing is still disabled until eMBEnable( ) is called.
+ *
+ * \param usTCPPort The TCP port to listen on.
+ * \return If the protocol stack has been initialized correctly the function
+ * returns eMBErrorCode::MB_ENOERR. Otherwise one of the following error
+ * codes is returned:
+ * - eMBErrorCode::MB_EINVAL If the slave address was not valid. Valid
+ * slave addresses are in the range 1 - 247.
+ * - eMBErrorCode::MB_EPORTERR IF the porting layer returned an error.
+ */
+eMBErrorCode eMBTCPInit( USHORT usTCPPort );
+
+/*! \ingroup modbus
+ * \brief Release resources used by the protocol stack.
+ *
+ * This function disables the Modbus protocol stack and release all
+ * hardware resources. It must only be called when the protocol stack
+ * is disabled.
+ *
+ * \note Note all ports implement this function. A port which wants to
+ * get an callback must define the macro MB_PORT_HAS_CLOSE to 1.
+ *
+ * \return If the resources where released it return eMBErrorCode::MB_ENOERR.
+ * If the protocol stack is not in the disabled state it returns
+ * eMBErrorCode::MB_EILLSTATE.
+ */
+eMBErrorCode eMBClose( void );
+
+/*! \ingroup modbus
+ * \brief Enable the Modbus protocol stack.
+ *
+ * This function enables processing of Modbus frames. Enabling the protocol
+ * stack is only possible if it is in the disabled state.
+ *
+ * \return If the protocol stack is now in the state enabled it returns
+ * eMBErrorCode::MB_ENOERR. If it was not in the disabled state it
+ * return eMBErrorCode::MB_EILLSTATE.
+ */
+eMBErrorCode eMBEnable( void );
+
+/*! \ingroup modbus
+ * \brief Disable the Modbus protocol stack.
+ *
+ * This function disables processing of Modbus frames.
+ *
+ * \return If the protocol stack has been disabled it returns
+ * eMBErrorCode::MB_ENOERR. If it was not in the enabled state it returns
+ * eMBErrorCode::MB_EILLSTATE.
+ */
+eMBErrorCode eMBDisable( void );
+
+/*! \ingroup modbus
+ * \brief The main pooling loop of the Modbus protocol stack.
+ *
+ * This function must be called periodically. The timer interval required
+ * is given by the application dependent Modbus slave timeout. Internally the
+ * function calls xMBPortEventGet() and waits for an event from the receiver or
+ * transmitter state machines.
+ *
+ * \return If the protocol stack is not in the enabled state the function
+ * returns eMBErrorCode::MB_EILLSTATE. Otherwise it returns
+ * eMBErrorCode::MB_ENOERR.
+ */
+eMBErrorCode eMBPoll( void );
+
+/*! \ingroup modbus
+ * \brief Configure the slave id of the device.
+ *
+ * This function should be called when the Modbus function <em>Report Slave ID</em>
+ * is enabled ( By defining MB_FUNC_OTHER_REP_SLAVEID_ENABLED in mbconfig.h ).
+ *
+ * \param ucSlaveID Values is returned in the <em>Slave ID</em> byte of the
+ * <em>Report Slave ID</em> response.
+ * \param xIsRunning If TRUE the <em>Run Indicator Status</em> byte is set to 0xFF.
+ * otherwise the <em>Run Indicator Status</em> is 0x00.
+ * \param pucAdditional Values which should be returned in the <em>Additional</em>
+ * bytes of the <em> Report Slave ID</em> response.
+ * \param usAdditionalLen Length of the buffer <code>pucAdditonal</code>.
+ *
+ * \return If the static buffer defined by MB_FUNC_OTHER_REP_SLAVEID_BUF in
+ * mbconfig.h is to small it returns eMBErrorCode::MB_ENORES. Otherwise
+ * it returns eMBErrorCode::MB_ENOERR.
+ */
+eMBErrorCode eMBSetSlaveID( UCHAR ucSlaveID, BOOL xIsRunning,
+ UCHAR const *pucAdditional,
+ USHORT usAdditionalLen );
+
+/*! \ingroup modbus
+ * \brief Registers a callback handler for a given function code.
+ *
+ * This function registers a new callback handler for a given function code.
+ * The callback handler supplied is responsible for interpreting the Modbus PDU and
+ * the creation of an appropriate response. In case of an error it should return
+ * one of the possible Modbus exceptions which results in a Modbus exception frame
+ * sent by the protocol stack.
+ *
+ * \param ucFunctionCode The Modbus function code for which this handler should
+ * be registers. Valid function codes are in the range 1 to 127.
+ * \param pxHandler The function handler which should be called in case
+ * such a frame is received. If \c NULL a previously registered function handler
+ * for this function code is removed.
+ *
+ * \return eMBErrorCode::MB_ENOERR if the handler has been installed. If no
+ * more resources are available it returns eMBErrorCode::MB_ENORES. In this
+ * case the values in mbconfig.h should be adjusted. If the argument was not
+ * valid it returns eMBErrorCode::MB_EINVAL.
+ */
+eMBErrorCode eMBRegisterCB( UCHAR ucFunctionCode,
+ pxMBFunctionHandler pxHandler );
+
+/* ----------------------- Callback -----------------------------------------*/
+
+/*! \defgroup modbus_registers Modbus Registers
+ * \code #include "mb.h" \endcode
+ * The protocol stack does not internally allocate any memory for the
+ * registers. This makes the protocol stack very small and also usable on
+ * low end targets. In addition the values don't have to be in the memory
+ * and could for example be stored in a flash.<br>
+ * Whenever the protocol stack requires a value it calls one of the callback
+ * function with the register address and the number of registers to read
+ * as an argument. The application should then read the actual register values
+ * (for example the ADC voltage) and should store the result in the supplied
+ * buffer.<br>
+ * If the protocol stack wants to update a register value because a write
+ * register function was received a buffer with the new register values is
+ * passed to the callback function. The function should then use these values
+ * to update the application register values.
+ */
+
+/*! \ingroup modbus_registers
+ * \brief Callback function used if the value of a <em>Input Register</em>
+ * is required by the protocol stack. The starting register address is given
+ * by \c usAddress and the last register is given by <tt>usAddress +
+ * usNRegs - 1</tt>.
+ *
+ * \param pucRegBuffer A buffer where the callback function should write
+ * the current value of the modbus registers to.
+ * \param usAddress The starting address of the register. Input registers
+ * are in the range 1 - 65535.
+ * \param usNRegs Number of registers the callback function must supply.
+ *
+ * \return The function must return one of the following error codes:
+ * - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
+ * Modbus response is sent.
+ * - eMBErrorCode::MB_ENOREG If the application can not supply values
+ * for registers within this range. In this case a
+ * <b>ILLEGAL DATA ADDRESS</b> exception frame is sent as a response.
+ * - eMBErrorCode::MB_ETIMEDOUT If the requested register block is
+ * currently not available and the application dependent response
+ * timeout would be violated. In this case a <b>SLAVE DEVICE BUSY</b>
+ * exception is sent as a response.
+ * - eMBErrorCode::MB_EIO If an unrecoverable error occurred. In this case
+ * a <b>SLAVE DEVICE FAILURE</b> exception is sent as a response.
+ */
+eMBErrorCode eMBRegInputCB( UCHAR * pucRegBuffer, USHORT usAddress,
+ USHORT usNRegs );
+
+/*! \ingroup modbus_registers
+ * \brief Callback function used if a <em>Holding Register</em> value is
+ * read or written by the protocol stack. The starting register address
+ * is given by \c usAddress and the last register is given by
+ * <tt>usAddress + usNRegs - 1</tt>.
+ *
+ * \param pucRegBuffer If the application registers values should be updated the
+ * buffer points to the new registers values. If the protocol stack needs
+ * to now the current values the callback function should write them into
+ * this buffer.
+ * \param usAddress The starting address of the register.
+ * \param usNRegs Number of registers to read or write.
+ * \param eMode If eMBRegisterMode::MB_REG_WRITE the application register
+ * values should be updated from the values in the buffer. For example
+ * this would be the case when the Modbus master has issued an
+ * <b>WRITE SINGLE REGISTER</b> command.
+ * If the value eMBRegisterMode::MB_REG_READ the application should copy
+ * the current values into the buffer \c pucRegBuffer.
+ *
+ * \return The function must return one of the following error codes:
+ * - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
+ * Modbus response is sent.
+ * - eMBErrorCode::MB_ENOREG If the application can not supply values
+ * for registers within this range. In this case a
+ * <b>ILLEGAL DATA ADDRESS</b> exception frame is sent as a response.
+ * - eMBErrorCode::MB_ETIMEDOUT If the requested register block is
+ * currently not available and the application dependent response
+ * timeout would be violated. In this case a <b>SLAVE DEVICE BUSY</b>
+ * exception is sent as a response.
+ * - eMBErrorCode::MB_EIO If an unrecoverable error occurred. In this case
+ * a <b>SLAVE DEVICE FAILURE</b> exception is sent as a response.
+ */
+eMBErrorCode eMBRegHoldingCB( UCHAR * pucRegBuffer, USHORT usAddress,
+ USHORT usNRegs, eMBRegisterMode eMode );
+
+/*! \ingroup modbus_registers
+ * \brief Callback function used if a <em>Coil Register</em> value is
+ * read or written by the protocol stack. If you are going to use
+ * this function you might use the functions xMBUtilSetBits( ) and
+ * xMBUtilGetBits( ) for working with bitfields.
+ *
+ * \param pucRegBuffer The bits are packed in bytes where the first coil
+ * starting at address \c usAddress is stored in the LSB of the
+ * first byte in the buffer <code>pucRegBuffer</code>.
+ * If the buffer should be written by the callback function unused
+ * coil values (I.e. if not a multiple of eight coils is used) should be set
+ * to zero.
+ * \param usAddress The first coil number.
+ * \param usNCoils Number of coil values requested.
+ * \param eMode If eMBRegisterMode::MB_REG_WRITE the application values should
+ * be updated from the values supplied in the buffer \c pucRegBuffer.
+ * If eMBRegisterMode::MB_REG_READ the application should store the current
+ * values in the buffer \c pucRegBuffer.
+ *
+ * \return The function must return one of the following error codes:
+ * - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
+ * Modbus response is sent.
+ * - eMBErrorCode::MB_ENOREG If the application does not map an coils
+ * within the requested address range. In this case a
+ * <b>ILLEGAL DATA ADDRESS</b> is sent as a response.
+ * - eMBErrorCode::MB_ETIMEDOUT If the requested register block is
+ * currently not available and the application dependent response
+ * timeout would be violated. In this case a <b>SLAVE DEVICE BUSY</b>
+ * exception is sent as a response.
+ * - eMBErrorCode::MB_EIO If an unrecoverable error occurred. In this case
+ * a <b>SLAVE DEVICE FAILURE</b> exception is sent as a response.
+ */
+eMBErrorCode eMBRegCoilsCB( UCHAR * pucRegBuffer, USHORT usAddress,
+ USHORT usNCoils, eMBRegisterMode eMode );
+
+/*! \ingroup modbus_registers
+ * \brief Callback function used if a <em>Input Discrete Register</em> value is
+ * read by the protocol stack.
+ *
+ * If you are going to use his function you might use the functions
+ * xMBUtilSetBits( ) and xMBUtilGetBits( ) for working with bitfields.
+ *
+ * \param pucRegBuffer The buffer should be updated with the current
+ * coil values. The first discrete input starting at \c usAddress must be
+ * stored at the LSB of the first byte in the buffer. If the requested number
+ * is not a multiple of eight the remaining bits should be set to zero.
+ * \param usAddress The starting address of the first discrete input.
+ * \param usNDiscrete Number of discrete input values.
+ * \return The function must return one of the following error codes:
+ * - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
+ * Modbus response is sent.
+ * - eMBErrorCode::MB_ENOREG If no such discrete inputs exists.
+ * In this case a <b>ILLEGAL DATA ADDRESS</b> exception frame is sent
+ * as a response.
+ * - eMBErrorCode::MB_ETIMEDOUT If the requested register block is
+ * currently not available and the application dependent response
+ * timeout would be violated. In this case a <b>SLAVE DEVICE BUSY</b>
+ * exception is sent as a response.
+ * - eMBErrorCode::MB_EIO If an unrecoverable error occurred. In this case
+ * a <b>SLAVE DEVICE FAILURE</b> exception is sent as a response.
+ */
+eMBErrorCode eMBRegDiscreteCB( UCHAR * pucRegBuffer, USHORT usAddress,
+ USHORT usNDiscrete );
+
+#ifdef __cplusplus
+PR_END_EXTERN_C
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/include/mbconfig.h Fri Mar 31 01:47:35 2017 +0000
@@ -0,0 +1,103 @@
+/*
+ * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
+ * Copyright (c) 2006 Christian Walter <wolti@sil.at>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * File: $Id: mbconfig.h,v 1.14 2006/12/07 22:10:34 wolti Exp $
+ */
+
+#ifndef _MB_CONFIG_H
+#define _MB_CONFIG_H
+
+#ifdef __cplusplus
+PR_BEGIN_EXTERN_C
+#endif
+/* ----------------------- Defines ------------------------------------------*/
+/*! \defgroup modbus_cfg Modbus Configuration
+ *
+ * Most modules in the protocol stack are completly optional and can be
+ * excluded. This is specially important if target resources are very small
+ * and program memory space should be saved.<br>
+ *
+ * All of these settings are available in the file <code>mbconfig.h</code>
+ */
+/*! \addtogroup modbus_cfg
+ * @{
+ */
+/*! \brief If Modbus ASCII support is enabled. */
+#define MB_ASCII_ENABLED ( 0 )
+/*! \brief If Modbus RTU support is enabled. */
+#define MB_RTU_ENABLED ( 1 )
+/*! \brief If Modbus TCP support is enabled. */
+#define MB_TCP_ENABLED ( 0 )
+/*! \brief The character timeout value for Modbus ASCII.
+ *
+ * The character timeout value is not fixed for Modbus ASCII and is therefore
+ * a configuration option. It should be set to the maximum expected delay
+ * time of the network.
+ */
+#define MB_ASCII_TIMEOUT_SEC ( 0 )
+/*! \brief Maximum number of Modbus functions codes the protocol stack
+ * should support.
+ *
+ * The maximum number of supported Modbus functions must be greater than
+ * the sum of all enabled functions in this file and custom function
+ * handlers. If set to small adding more functions will fail.
+ */
+#define MB_FUNC_HANDLERS_MAX ( 16 )
+/*! \brief Number of bytes which should be allocated for the <em>Report Slave ID
+ * </em>command.
+ *
+ * This number limits the maximum size of the additional segment in the
+ * report slave id function. See eMBSetSlaveID( ) for more information on
+ * how to set this value. It is only used if MB_FUNC_OTHER_REP_SLAVEID_ENABLED
+ * is set to <code>1</code>.
+ */
+#define MB_FUNC_OTHER_REP_SLAVEID_BUF ( 32 )
+/*! \brief If the <em>Report Slave ID</em> function should be enabled. */
+#define MB_FUNC_OTHER_REP_SLAVEID_ENABLED ( 1 )
+/*! \brief If the <em>Read Input Registers</em> function should be enabled. */
+#define MB_FUNC_READ_INPUT_ENABLED ( 1 )
+/*! \brief If the <em>Read Holding Registers</em> function should be enabled. */
+#define MB_FUNC_READ_HOLDING_ENABLED ( 1 )
+/*! \brief If the <em>Write Single Register</em> function should be enabled. */
+#define MB_FUNC_WRITE_HOLDING_ENABLED ( 1 )
+/*! \brief If the <em>Write Multiple registers</em> function should be enabled. */
+#define MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED ( 1 )
+/*! \brief If the <em>Read Coils</em> function should be enabled. */
+#define MB_FUNC_READ_COILS_ENABLED ( 1 )
+/*! \brief If the <em>Write Coils</em> function should be enabled. */
+#define MB_FUNC_WRITE_COIL_ENABLED ( 1 )
+/*! \brief If the <em>Write Multiple Coils</em> function should be enabled. */
+#define MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED ( 1 )
+/*! \brief If the <em>Read Discrete Inputs</em> function should be enabled. */
+#define MB_FUNC_READ_DISCRETE_INPUTS_ENABLED ( 1 )
+/*! \brief If the <em>Read/Write Multiple Registers</em> function should be enabled. */
+#define MB_FUNC_READWRITE_HOLDING_ENABLED ( 1 )
+/*! @} */
+#ifdef __cplusplus
+PR_END_EXTERN_C
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/include/mbframe.h Fri Mar 31 01:47:35 2017 +0000 @@ -0,0 +1,87 @@ +/* + * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU. + * Copyright (c) 2006 Christian Walter <wolti@sil.at> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * File: $Id: mbframe.h,v 1.9 2006/12/07 22:10:34 wolti Exp $ + */ + +#ifndef _MB_FRAME_H +#define _MB_FRAME_H + +#ifdef __cplusplus +PR_BEGIN_EXTERN_C +#endif + +/*! + * Constants which defines the format of a modbus frame. The example is + * shown for a Modbus RTU/ASCII frame. Note that the Modbus PDU is not + * dependent on the underlying transport. + * + * <code> + * <------------------------ MODBUS SERIAL LINE PDU (1) -------------------> + * <----------- MODBUS PDU (1') ----------------> + * +-----------+---------------+----------------------------+-------------+ + * | Address | Function Code | Data | CRC/LRC | + * +-----------+---------------+----------------------------+-------------+ + * | | | | + * (2) (3/2') (3') (4) + * + * (1) ... MB_SER_PDU_SIZE_MAX = 256 + * (2) ... MB_SER_PDU_ADDR_OFF = 0 + * (3) ... MB_SER_PDU_PDU_OFF = 1 + * (4) ... MB_SER_PDU_SIZE_CRC = 2 + * + * (1') ... MB_PDU_SIZE_MAX = 253 + * (2') ... MB_PDU_FUNC_OFF = 0 + * (3') ... MB_PDU_DATA_OFF = 1 + * </code> + */ + +/* ----------------------- Defines ------------------------------------------*/ +#define MB_PDU_SIZE_MAX 253 /*!< Maximum size of a PDU. */ +#define MB_PDU_SIZE_MIN 1 /*!< Function Code */ +#define MB_PDU_FUNC_OFF 0 /*!< Offset of function code in PDU. */ +#define MB_PDU_DATA_OFF 1 /*!< Offset for response data in PDU. */ + +/* ----------------------- Prototypes 0-------------------------------------*/ +typedef void ( *pvMBFrameStart ) ( void ); + +typedef void ( *pvMBFrameStop ) ( void ); + +typedef eMBErrorCode( *peMBFrameReceive ) ( UCHAR * pucRcvAddress, + UCHAR ** pucFrame, + USHORT * pusLength ); + +typedef eMBErrorCode( *peMBFrameSend ) ( UCHAR slaveAddress, + const UCHAR * pucFrame, + USHORT usLength ); + +typedef void( *pvMBFrameClose ) ( void ); + +#ifdef __cplusplus +PR_END_EXTERN_C +#endif +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/include/mbfunc.h Fri Mar 31 01:47:35 2017 +0000 @@ -0,0 +1,80 @@ +/* + * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU. + * Copyright (c) 2006 Christian Walter <wolti@sil.at> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * File: $Id: mbfunc.h,v 1.12 2006/12/07 22:10:34 wolti Exp $ + */ + +#ifndef _MB_FUNC_H +#define _MB_FUNC_H + +#ifdef __cplusplus +PR_BEGIN_EXTERN_C +#endif +#if MB_FUNC_OTHER_REP_SLAVEID_BUF > 0 + eMBException eMBFuncReportSlaveID( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#if MB_FUNC_READ_INPUT_ENABLED > 0 +eMBException eMBFuncReadInputRegister( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#if MB_FUNC_READ_HOLDING_ENABLED > 0 +eMBException eMBFuncReadHoldingRegister( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#if MB_FUNC_WRITE_HOLDING_ENABLED > 0 +eMBException eMBFuncWriteHoldingRegister( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#if MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED > 0 +eMBException eMBFuncWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#if MB_FUNC_READ_COILS_ENABLED > 0 +eMBException eMBFuncReadCoils( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#if MB_FUNC_WRITE_COIL_ENABLED > 0 +eMBException eMBFuncWriteCoil( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#if MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED > 0 +eMBException eMBFuncWriteMultipleCoils( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#if MB_FUNC_READ_DISCRETE_INPUTS_ENABLED > 0 +eMBException eMBFuncReadDiscreteInputs( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#if MB_FUNC_READWRITE_HOLDING_ENABLED > 0 +eMBException eMBFuncReadWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#ifdef __cplusplus +PR_END_EXTERN_C +#endif +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/include/mbport.h Fri Mar 31 01:47:35 2017 +0000
@@ -0,0 +1,127 @@
+/*
+ * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
+ * Copyright (c) 2006 Christian Walter <wolti@sil.at>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * File: $Id: mbport.h,v 1.17 2006/12/07 22:10:34 wolti Exp $
+ */
+
+#ifndef _MB_PORT_H
+#define _MB_PORT_H
+
+#ifdef __cplusplus
+PR_BEGIN_EXTERN_C
+#endif
+
+/* ----------------------- Type definitions ---------------------------------*/
+
+typedef enum
+{
+ EV_READY, /*!< Startup finished. */
+ EV_FRAME_RECEIVED, /*!< Frame received. */
+ EV_EXECUTE, /*!< Execute function. */
+ EV_FRAME_SENT /*!< Frame sent. */
+} eMBEventType;
+
+/*! \ingroup modbus
+ * \brief Parity used for characters in serial mode.
+ *
+ * The parity which should be applied to the characters sent over the serial
+ * link. Please note that this values are actually passed to the porting
+ * layer and therefore not all parity modes might be available.
+ */
+typedef enum
+{
+ MB_PAR_NONE, /*!< No parity. */
+ MB_PAR_ODD, /*!< Odd parity. */
+ MB_PAR_EVEN /*!< Even parity. */
+} eMBParity;
+
+/* ----------------------- Supporting functions -----------------------------*/
+BOOL xMBPortEventInit( void );
+
+BOOL xMBPortEventPost( eMBEventType eEvent );
+
+BOOL xMBPortEventGet( /*@out@ */ eMBEventType * eEvent );
+
+/* ----------------------- Serial port functions ----------------------------*/
+
+BOOL xMBPortSerialInit( UCHAR ucPort, ULONG ulBaudRate,
+ UCHAR ucDataBits, eMBParity eParity );
+
+void vMBPortClose( void );
+
+void xMBPortSerialClose( void );
+
+void vMBPortSerialEnable( BOOL xRxEnable, BOOL xTxEnable );
+
+INLINE BOOL xMBPortSerialGetByte( CHAR * pucByte );
+
+INLINE BOOL xMBPortSerialPutByte( CHAR ucByte );
+
+/* ----------------------- Timers functions ---------------------------------*/
+BOOL xMBPortTimersInit( USHORT usTimeOut50us );
+
+void xMBPortTimersClose( void );
+
+INLINE void vMBPortTimersEnable( void );
+
+INLINE void vMBPortTimersDisable( void );
+
+/* ----------------------- Callback for the protocol stack ------------------*/
+
+/*!
+ * \brief Callback function for the porting layer when a new byte is
+ * available.
+ *
+ * Depending upon the mode this callback function is used by the RTU or
+ * ASCII transmission layers. In any case a call to xMBPortSerialGetByte()
+ * must immediately return a new character.
+ *
+ * \return <code>TRUE</code> if a event was posted to the queue because
+ * a new byte was received. The port implementation should wake up the
+ * tasks which are currently blocked on the eventqueue.
+ */
+extern BOOL( *pxMBFrameCBByteReceived ) ( void );
+
+extern BOOL( *pxMBFrameCBTransmitterEmpty ) ( void );
+
+extern BOOL( *pxMBPortCBTimerExpired ) ( void );
+
+/* ----------------------- TCP port functions -------------------------------*/
+BOOL xMBTCPPortInit( USHORT usTCPPort );
+
+void vMBTCPPortClose( void );
+
+void vMBTCPPortDisable( void );
+
+BOOL xMBTCPPortGetRequest( UCHAR **ppucMBTCPFrame, USHORT * usTCPLength );
+
+BOOL xMBTCPPortSendResponse( const UCHAR *pucMBTCPFrame, USHORT usTCPLength );
+
+#ifdef __cplusplus
+PR_END_EXTERN_C
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/include/mbproto.h Fri Mar 31 01:47:35 2017 +0000
@@ -0,0 +1,83 @@
+/*
+ * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
+ * Copyright (c) 2006 Christian Walter <wolti@sil.at>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * File: $Id: mbproto.h,v 1.14 2006/12/07 22:10:34 wolti Exp $
+ */
+
+#ifndef _MB_PROTO_H
+#define _MB_PROTO_H
+
+#ifdef __cplusplus
+PR_BEGIN_EXTERN_C
+#endif
+/* ----------------------- Defines ------------------------------------------*/
+#define MB_ADDRESS_BROADCAST ( 0 ) /*! Modbus broadcast address. */
+#define MB_ADDRESS_MIN ( 1 ) /*! Smallest possible slave address. */
+#define MB_ADDRESS_MAX ( 247 ) /*! Biggest possible slave address. */
+#define MB_FUNC_NONE ( 0 )
+#define MB_FUNC_READ_COILS ( 1 )
+#define MB_FUNC_READ_DISCRETE_INPUTS ( 2 )
+#define MB_FUNC_WRITE_SINGLE_COIL ( 5 )
+#define MB_FUNC_WRITE_MULTIPLE_COILS ( 15 )
+#define MB_FUNC_READ_HOLDING_REGISTER ( 3 )
+#define MB_FUNC_READ_INPUT_REGISTER ( 4 )
+#define MB_FUNC_WRITE_REGISTER ( 6 )
+#define MB_FUNC_WRITE_MULTIPLE_REGISTERS ( 16 )
+#define MB_FUNC_READWRITE_MULTIPLE_REGISTERS ( 23 )
+#define MB_FUNC_DIAG_READ_EXCEPTION ( 7 )
+#define MB_FUNC_DIAG_DIAGNOSTIC ( 8 )
+#define MB_FUNC_DIAG_GET_COM_EVENT_CNT ( 11 )
+#define MB_FUNC_DIAG_GET_COM_EVENT_LOG ( 12 )
+#define MB_FUNC_OTHER_REPORT_SLAVEID ( 17 )
+#define MB_FUNC_ERROR ( 128 )
+/* ----------------------- Type definitions ---------------------------------*/
+ typedef enum
+{
+ MB_EX_NONE = 0x00,
+ MB_EX_ILLEGAL_FUNCTION = 0x01,
+ MB_EX_ILLEGAL_DATA_ADDRESS = 0x02,
+ MB_EX_ILLEGAL_DATA_VALUE = 0x03,
+ MB_EX_SLAVE_DEVICE_FAILURE = 0x04,
+ MB_EX_ACKNOWLEDGE = 0x05,
+ MB_EX_SLAVE_BUSY = 0x06,
+ MB_EX_MEMORY_PARITY_ERROR = 0x08,
+ MB_EX_GATEWAY_PATH_FAILED = 0x0A,
+ MB_EX_GATEWAY_TGT_FAILED = 0x0B
+} eMBException;
+
+typedef eMBException( *pxMBFunctionHandler ) ( UCHAR * pucFrame, USHORT * pusLength );
+
+typedef struct
+{
+ UCHAR ucFunctionCode;
+ pxMBFunctionHandler pxHandler;
+} xMBFunctionHandler;
+
+#ifdef __cplusplus
+PR_END_EXTERN_C
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/include/mbutils.h Fri Mar 31 01:47:35 2017 +0000
@@ -0,0 +1,108 @@
+/*
+ * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
+ * Copyright (c) 2006 Christian Walter <wolti@sil.at>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * File: $Id: mbutils.h,v 1.5 2006/12/07 22:10:34 wolti Exp $
+ */
+
+#ifndef _MB_UTILS_H
+#define _MB_UTILS_H
+
+#ifdef __cplusplus
+PR_BEGIN_EXTERN_C
+#endif
+/*! \defgroup modbus_utils Utilities
+ *
+ * This module contains some utility functions which can be used by
+ * the application. It includes some special functions for working with
+ * bitfields backed by a character array buffer.
+ *
+ */
+/*! \addtogroup modbus_utils
+ * @{
+ */
+/*! \brief Function to set bits in a byte buffer.
+ *
+ * This function allows the efficient use of an array to implement bitfields.
+ * The array used for storing the bits must always be a multiple of two
+ * bytes. Up to eight bits can be set or cleared in one operation.
+ *
+ * \param ucByteBuf A buffer where the bit values are stored. Must be a
+ * multiple of 2 bytes. No length checking is performed and if
+ * usBitOffset / 8 is greater than the size of the buffer memory contents
+ * is overwritten.
+ * \param usBitOffset The starting address of the bits to set. The first
+ * bit has the offset 0.
+ * \param ucNBits Number of bits to modify. The value must always be smaller
+ * than 8.
+ * \param ucValues Thew new values for the bits. The value for the first bit
+ * starting at <code>usBitOffset</code> is the LSB of the value
+ * <code>ucValues</code>
+ *
+ * \code
+ * ucBits[2] = {0, 0};
+ *
+ * // Set bit 4 to 1 (read: set 1 bit starting at bit offset 4 to value 1)
+ * xMBUtilSetBits( ucBits, 4, 1, 1 );
+ *
+ * // Set bit 7 to 1 and bit 8 to 0.
+ * xMBUtilSetBits( ucBits, 7, 2, 0x01 );
+ *
+ * // Set bits 8 - 11 to 0x05 and bits 12 - 15 to 0x0A;
+ * xMBUtilSetBits( ucBits, 8, 8, 0x5A);
+ * \endcode
+ */
+void xMBUtilSetBits( UCHAR * ucByteBuf, USHORT usBitOffset,
+ UCHAR ucNBits, UCHAR ucValues );
+
+/*! \brief Function to read bits in a byte buffer.
+ *
+ * This function is used to extract up bit values from an array. Up to eight
+ * bit values can be extracted in one step.
+ *
+ * \param ucByteBuf A buffer where the bit values are stored.
+ * \param usBitOffset The starting address of the bits to set. The first
+ * bit has the offset 0.
+ * \param ucNBits Number of bits to modify. The value must always be smaller
+ * than 8.
+ *
+ * \code
+ * UCHAR ucBits[2] = {0, 0};
+ * UCHAR ucResult;
+ *
+ * // Extract the bits 3 - 10.
+ * ucResult = xMBUtilGetBits( ucBits, 3, 8 );
+ * \endcode
+ */
+UCHAR xMBUtilGetBits( UCHAR * ucByteBuf, USHORT usBitOffset,
+ UCHAR ucNBits );
+
+/*! @} */
+
+#ifdef __cplusplus
+PR_END_EXTERN_C
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mb.cpp Fri Mar 31 01:47:35 2017 +0000
@@ -0,0 +1,357 @@
+/*
+ * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
+ * Copyright (c) 2006 Christian Walter <wolti@sil.at>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * File: $Id: mb.c,v 1.27 2007/02/18 23:45:41 wolti Exp $
+ */
+
+/* ----------------------- System includes ----------------------------------*/
+#include "stdlib.h"
+#include "string.h"
+
+/* ----------------------- Platform includes --------------------------------*/
+#include "port.h"
+
+/* ----------------------- Modbus includes ----------------------------------*/
+#include "mb.h"
+#include "mbconfig.h"
+#include "mbframe.h"
+#include "mbproto.h"
+#include "mbfunc.h"
+#include "mbport.h"
+#if MB_RTU_ENABLED == 1
+#include "mbrtu.h"
+#endif
+#if MB_ASCII_ENABLED == 1
+#include "mbascii.h"
+#endif
+#if MB_TCP_ENABLED == 1
+#include "mbtcp.h"
+#endif
+
+#ifndef MB_PORT_HAS_CLOSE
+#define MB_PORT_HAS_CLOSE 0
+#endif
+
+/* ----------------------- Static variables ---------------------------------*/
+
+
+static UCHAR ucMBAddress;
+static eMBMode eMBCurrentMode;
+
+static enum {
+ STATE_ENABLED,
+ STATE_DISABLED,
+ STATE_NOT_INITIALIZED
+} eMBState = STATE_NOT_INITIALIZED;
+
+/* Functions pointer which are initialized in eMBInit( ). Depending on the
+ * mode (RTU or ASCII) the are set to the correct implementations.
+ */
+static peMBFrameSend peMBFrameSendCur;
+static pvMBFrameStart pvMBFrameStartCur;
+static pvMBFrameStop pvMBFrameStopCur;
+static peMBFrameReceive peMBFrameReceiveCur;
+static pvMBFrameClose pvMBFrameCloseCur;
+
+/* Callback functions required by the porting layer. They are called when
+ * an external event has happend which includes a timeout or the reception
+ * or transmission of a character.
+ */
+BOOL( *pxMBFrameCBByteReceived ) ( void );
+BOOL( *pxMBFrameCBTransmitterEmpty ) ( void );
+BOOL( *pxMBPortCBTimerExpired ) ( void );
+
+BOOL( *pxMBFrameCBReceiveFSMCur ) ( void );
+BOOL( *pxMBFrameCBTransmitFSMCur ) ( void );
+
+/* An array of Modbus functions handlers which associates Modbus function
+ * codes with implementing functions.
+ */
+static xMBFunctionHandler xFuncHandlers[MB_FUNC_HANDLERS_MAX] = {
+#if MB_FUNC_OTHER_REP_SLAVEID_ENABLED > 0
+ {MB_FUNC_OTHER_REPORT_SLAVEID, eMBFuncReportSlaveID},
+#endif
+#if MB_FUNC_READ_INPUT_ENABLED > 0
+ {MB_FUNC_READ_INPUT_REGISTER, eMBFuncReadInputRegister},
+#endif
+#if MB_FUNC_READ_HOLDING_ENABLED > 0
+ {MB_FUNC_READ_HOLDING_REGISTER, eMBFuncReadHoldingRegister},
+#endif
+#if MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED > 0
+ {MB_FUNC_WRITE_MULTIPLE_REGISTERS, eMBFuncWriteMultipleHoldingRegister},
+#endif
+#if MB_FUNC_WRITE_HOLDING_ENABLED > 0
+ {MB_FUNC_WRITE_REGISTER, eMBFuncWriteHoldingRegister},
+#endif
+#if MB_FUNC_READWRITE_HOLDING_ENABLED > 0
+ {MB_FUNC_READWRITE_MULTIPLE_REGISTERS, eMBFuncReadWriteMultipleHoldingRegister},
+#endif
+#if MB_FUNC_READ_COILS_ENABLED > 0
+ {MB_FUNC_READ_COILS, eMBFuncReadCoils},
+#endif
+#if MB_FUNC_WRITE_COIL_ENABLED > 0
+ {MB_FUNC_WRITE_SINGLE_COIL, eMBFuncWriteCoil},
+#endif
+#if MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED > 0
+ {MB_FUNC_WRITE_MULTIPLE_COILS, eMBFuncWriteMultipleCoils},
+#endif
+#if MB_FUNC_READ_DISCRETE_INPUTS_ENABLED > 0
+ {MB_FUNC_READ_DISCRETE_INPUTS, eMBFuncReadDiscreteInputs},
+#endif
+};
+
+/* ----------------------- Start implementation -----------------------------*/
+eMBErrorCode
+eMBInit( eMBMode eMode, UCHAR ucSlaveAddress, UCHAR ucPort, ULONG ulBaudRate, eMBParity eParity ) {
+ eMBErrorCode eStatus = MB_ENOERR;
+
+ /* check preconditions */
+ if ( ( ucSlaveAddress == MB_ADDRESS_BROADCAST ) ||
+ ( ucSlaveAddress < MB_ADDRESS_MIN ) || ( ucSlaveAddress > MB_ADDRESS_MAX ) ) {
+ eStatus = MB_EINVAL;
+ } else {
+ ucMBAddress = ucSlaveAddress;
+
+ switch ( eMode ) {
+#if MB_RTU_ENABLED > 0
+ case MB_RTU:
+ pvMBFrameStartCur = eMBRTUStart;
+ pvMBFrameStopCur = eMBRTUStop;
+ peMBFrameSendCur = eMBRTUSend;
+ peMBFrameReceiveCur = eMBRTUReceive;
+ pvMBFrameCloseCur = MB_PORT_HAS_CLOSE ? vMBPortClose : NULL;
+ pxMBFrameCBByteReceived = xMBRTUReceiveFSM;
+ pxMBFrameCBTransmitterEmpty = xMBRTUTransmitFSM;
+ pxMBPortCBTimerExpired = xMBRTUTimerT35Expired;
+
+ eStatus = eMBRTUInit( ucMBAddress, ucPort, ulBaudRate, eParity );
+ break;
+#endif
+#if MB_ASCII_ENABLED > 0
+ case MB_ASCII:
+ pvMBFrameStartCur = eMBASCIIStart;
+ pvMBFrameStopCur = eMBASCIIStop;
+ peMBFrameSendCur = eMBASCIISend;
+ peMBFrameReceiveCur = eMBASCIIReceive;
+ pvMBFrameCloseCur = MB_PORT_HAS_CLOSE ? vMBPortClose : NULL;
+ pxMBFrameCBByteReceived = xMBASCIIReceiveFSM;
+ pxMBFrameCBTransmitterEmpty = xMBASCIITransmitFSM;
+ pxMBPortCBTimerExpired = xMBASCIITimerT1SExpired;
+
+ eStatus = eMBASCIIInit( ucMBAddress, ucPort, ulBaudRate, eParity );
+ break;
+#endif
+ default:
+ eStatus = MB_EINVAL;
+ }
+
+ if ( eStatus == MB_ENOERR ) {
+ if ( !xMBPortEventInit( ) ) {
+ /* port dependent event module initalization failed. */
+ eStatus = MB_EPORTERR;
+ } else {
+ eMBCurrentMode = eMode;
+ eMBState = STATE_DISABLED;
+ }
+ }
+ }
+ return eStatus;
+}
+
+#if MB_TCP_ENABLED > 0
+eMBErrorCode
+eMBTCPInit( USHORT ucTCPPort ) {
+ eMBErrorCode eStatus = MB_ENOERR;
+
+ if ( ( eStatus = eMBTCPDoInit( ucTCPPort ) ) != MB_ENOERR ) {
+ eMBState = STATE_DISABLED;
+ } else if ( !xMBPortEventInit( ) ) {
+ /* Port dependent event module initalization failed. */
+ eStatus = MB_EPORTERR;
+ } else {
+ pvMBFrameStartCur = eMBTCPStart;
+ pvMBFrameStopCur = eMBTCPStop;
+ peMBFrameReceiveCur = eMBTCPReceive;
+ peMBFrameSendCur = eMBTCPSend;
+ pvMBFrameCloseCur = MB_PORT_HAS_CLOSE ? vMBTCPPortClose : NULL;
+ ucMBAddress = MB_TCP_PSEUDO_ADDRESS;
+ eMBCurrentMode = MB_TCP;
+ eMBState = STATE_DISABLED;
+ }
+ return eStatus;
+}
+#endif
+
+
+eMBErrorCode
+eMBRegisterCB( UCHAR ucFunctionCode, pxMBFunctionHandler pxHandler ) {
+ int i;
+ eMBErrorCode eStatus;
+
+ if ( ( 0 < ucFunctionCode ) && ( ucFunctionCode <= 127 ) ) {
+ ENTER_CRITICAL_SECTION( );
+ if ( pxHandler != NULL ) {
+ for ( i = 0; i < MB_FUNC_HANDLERS_MAX; i++ ) {
+ if ( ( xFuncHandlers[i].pxHandler == NULL ) ||
+ ( xFuncHandlers[i].pxHandler == pxHandler ) ) {
+ xFuncHandlers[i].ucFunctionCode = ucFunctionCode;
+ xFuncHandlers[i].pxHandler = pxHandler;
+ break;
+ }
+ }
+ eStatus = ( i != MB_FUNC_HANDLERS_MAX ) ? MB_ENOERR : MB_ENORES;
+ } else {
+ for ( i = 0; i < MB_FUNC_HANDLERS_MAX; i++ ) {
+ if ( xFuncHandlers[i].ucFunctionCode == ucFunctionCode ) {
+ xFuncHandlers[i].ucFunctionCode = 0;
+ xFuncHandlers[i].pxHandler = NULL;
+ break;
+ }
+ }
+ /* Remove can't fail. */
+ eStatus = MB_ENOERR;
+ }
+ EXIT_CRITICAL_SECTION( );
+ } else {
+ eStatus = MB_EINVAL;
+ }
+ return eStatus;
+}
+
+
+eMBErrorCode
+eMBClose( void ) {
+ eMBErrorCode eStatus = MB_ENOERR;
+
+ if ( eMBState == STATE_DISABLED ) {
+ if ( pvMBFrameCloseCur != NULL ) {
+ pvMBFrameCloseCur( );
+ }
+ } else {
+ eStatus = MB_EILLSTATE;
+ }
+ return eStatus;
+}
+
+eMBErrorCode
+eMBEnable( void ) {
+ eMBErrorCode eStatus = MB_ENOERR;
+
+ if ( eMBState == STATE_DISABLED ) {
+ /* Activate the protocol stack. */
+ pvMBFrameStartCur( );
+ eMBState = STATE_ENABLED;
+ } else {
+ eStatus = MB_EILLSTATE;
+ }
+ return eStatus;
+}
+
+eMBErrorCode
+eMBDisable( void ) {
+ eMBErrorCode eStatus;
+
+ if ( eMBState == STATE_ENABLED ) {
+ pvMBFrameStopCur( );
+ eMBState = STATE_DISABLED;
+ eStatus = MB_ENOERR;
+ } else if ( eMBState == STATE_DISABLED ) {
+ eStatus = MB_ENOERR;
+ } else {
+ eStatus = MB_EILLSTATE;
+ }
+ return eStatus;
+}
+
+eMBErrorCode
+eMBPoll( void ) {
+ static UCHAR *ucMBFrame;
+ static UCHAR ucRcvAddress;
+ static UCHAR ucFunctionCode;
+ static USHORT usLength;
+ static eMBException eException;
+
+ int i;
+ eMBErrorCode eStatus = MB_ENOERR;
+ eMBEventType eEvent;
+
+ /* Check if the protocol stack is ready. */
+ if ( eMBState != STATE_ENABLED ) {
+ return MB_EILLSTATE;
+ }
+
+ /* Check if there is a event available. If not return control to caller.
+ * Otherwise we will handle the event. */
+ if ( xMBPortEventGet( &eEvent ) == TRUE ) {
+ switch ( eEvent ) {
+ case EV_READY:
+ break;
+
+ case EV_FRAME_RECEIVED:
+ eStatus = peMBFrameReceiveCur( &ucRcvAddress, &ucMBFrame, &usLength );
+ if ( eStatus == MB_ENOERR ) {
+ /* Check if the frame is for us. If not ignore the frame. */
+ if ( ( ucRcvAddress == ucMBAddress ) || ( ucRcvAddress == MB_ADDRESS_BROADCAST ) ) {
+ ( void )xMBPortEventPost( EV_EXECUTE );
+ }
+ }
+ break;
+
+ case EV_EXECUTE:
+ ucFunctionCode = ucMBFrame[MB_PDU_FUNC_OFF];
+ eException = MB_EX_ILLEGAL_FUNCTION;
+
+
+ for ( i = 0; i < MB_FUNC_HANDLERS_MAX; i++ ) {
+ /* No more function handlers registered. Abort. */
+ if ( xFuncHandlers[i].ucFunctionCode == 0 ) {
+ break;
+ } else if ( xFuncHandlers[i].ucFunctionCode == ucFunctionCode ) {
+ eException = xFuncHandlers[i].pxHandler( ucMBFrame, &usLength );
+ break;
+ }
+ }
+
+ /* If the request was not sent to the broadcast address we
+ * return a reply. */
+ if ( ucRcvAddress != MB_ADDRESS_BROADCAST ) {
+ if ( eException != MB_EX_NONE ) {
+ /* An exception occured. Build an error frame. */
+ usLength = 0;
+ ucMBFrame[usLength++] = ( UCHAR )( ucFunctionCode | MB_FUNC_ERROR );
+ ucMBFrame[usLength++] = eException;
+ }
+ eStatus = peMBFrameSendCur( ucMBAddress, ucMBFrame, usLength );
+ }
+ break;
+
+ case EV_FRAME_SENT:
+ break;
+ }
+ }
+ return MB_ENOERR;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/port/port.h Fri Mar 31 01:47:35 2017 +0000
@@ -0,0 +1,54 @@
+/*
+ * FreeModbus Libary: BARE Port
+ * Copyright (C) 2006 Christian Walter <wolti@sil.at>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * File: $Id: port.h,v 1.1 2006/08/22 21:35:13 wolti Exp $
+ */
+
+#ifndef _PORT_H
+#define _PORT_H
+
+#include <assert.h>
+#include <inttypes.h>
+#include "mbed.h" //stanley
+#define INLINE //inline
+#define PR_BEGIN_EXTERN_C //extern "C" {
+#define PR_END_EXTERN_C //}
+
+#define ENTER_CRITICAL_SECTION( ) __disable_irq() //stanley
+#define EXIT_CRITICAL_SECTION( ) __enable_irq() //stanley
+
+typedef uint8_t BOOL;
+
+typedef unsigned char UCHAR;
+typedef char CHAR;
+
+typedef uint16_t USHORT;
+typedef int16_t SHORT;
+
+typedef uint32_t ULONG;
+typedef int32_t LONG;
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/port/portevent.cpp Fri Mar 31 01:47:35 2017 +0000
@@ -0,0 +1,58 @@
+/*
+ * FreeModbus Libary: BARE Port
+ * Copyright (C) 2006 Christian Walter <wolti@sil.at>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * File: $Id: portevent.c,v 1.1 2006/08/22 21:35:13 wolti Exp $
+ */
+
+/* ----------------------- Modbus includes ----------------------------------*/
+#include "mb.h"
+#include "mbport.h"
+
+/* ----------------------- Variables ----------------------------------------*/
+static eMBEventType eQueuedEvent;
+static BOOL xEventInQueue;
+
+/* ----------------------- Start implementation -----------------------------*/
+BOOL
+xMBPortEventInit( void )
+{
+ xEventInQueue = FALSE;
+ return TRUE;
+}
+
+BOOL
+xMBPortEventPost( eMBEventType eEvent )
+{
+ xEventInQueue = TRUE;
+ eQueuedEvent = eEvent;
+ return TRUE;
+}
+
+BOOL
+xMBPortEventGet( eMBEventType * eEvent )
+{
+ BOOL xEventHappened = FALSE;
+
+ if( xEventInQueue )
+ {
+ *eEvent = eQueuedEvent;
+ xEventInQueue = FALSE;
+ xEventHappened = TRUE;
+ }
+ return xEventHappened;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/port/portserial.cpp Fri Mar 31 01:47:35 2017 +0000
@@ -0,0 +1,140 @@
+/*
+ * FreeModbus Libary: BARE Port
+ * Copyright (C) 2006 Christian Walter <wolti@sil.at>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * File: $Id: portserial.c,v 1.1 2006/08/22 21:35:13 wolti Exp $
+ */
+
+/* ----------------------- System includes ----------------------------------*/
+#include "mbed.h" // Cam
+
+/* ----------------------- Platform includes --------------------------------*/
+#include "port.h"
+
+/* ----------------------- Modbus includes ----------------------------------*/
+#include "mb.h"
+#include "mbport.h"
+
+
+/* ----------------------- static functions ---------------------------------*/
+static void prvvUARTTxReadyISR( void );
+static void prvvUARTRxISR( void );
+
+
+/* ----------------------- System Variables ---------------------------------*/
+Serial ser3(PB_10, PC_5); //serial3
+extern Serial pc;
+static uint8_t grx_buf=0;
+
+/* ----------------------- Start implementation -----------------------------*/
+void
+vMBPortSerialEnable( BOOL xRxEnable, BOOL xTxEnable )
+{
+ /* If xRXEnable enable serial receive interrupts. If xTxENable enable
+ * transmitter empty interrupts.
+ */
+
+
+ //stanley
+ ENTER_CRITICAL_SECTION( );
+
+
+ ser3.attach(NULL); //close all
+
+ if(xRxEnable)
+ ser3.attach(&prvvUARTRxISR,Serial::RxIrq);
+
+ if(xTxEnable)
+ {
+ ser3.attach(&prvvUARTTxReadyISR,Serial::TxIrq);
+ while(!ser3.writeable());
+ prvvUARTTxReadyISR();
+ }
+ EXIT_CRITICAL_SECTION( );
+
+ //if(xTxEnable)
+ //¤£¥Î¦b³oÃä³]©wser3.write(tx_buf,TX_BUFF_LENGTH,serialTxCBEvent,SERIAL_EVENT_TX_COMPLETE);
+
+ //else
+ //{
+ // ser3.attach(NULL,Serial::RxIrq); //stanley the test result find that this may disable RxIrq and TxIrq so have to enable TxIrq
+ // ser3.attach(&prvvUARTTxReadyISR,Serial::TxIrq);
+ //}
+}
+
+BOOL
+xMBPortSerialInit( UCHAR ucPORT, ULONG ulBaudRate, UCHAR ucDataBits, eMBParity eParity )
+{
+
+ ser3.baud(ulBaudRate); //stanley
+
+
+ return TRUE;
+}
+
+BOOL
+xMBPortSerialPutByte( CHAR ucByte )
+{
+ /* Put a byte in the UARTs transmit buffer. This function is called
+ * by the protocol stack if pxMBFrameCBTransmitterEmpty( ) has been
+ * called. */
+
+ //stanley
+ ser3.putc( ucByte);
+
+ return TRUE;
+}
+
+BOOL
+xMBPortSerialGetByte( CHAR * pucByte )
+{
+ /* Return the byte in the UARTs receive buffer. This function is called
+ * by the protocol stack after pxMBFrameCBByteReceived( ) has been called.
+ */
+
+ *pucByte = grx_buf;//stanley
+
+
+
+ return TRUE;
+}
+
+/* Create an interrupt handler for the transmit buffer empty interrupt
+ * (or an equivalent) for your target processor. This function should then
+ * call pxMBFrameCBTransmitterEmpty( ) which tells the protocol stack that
+ * a new character can be sent. The protocol stack will then call
+ * xMBPortSerialPutByte( ) to send the character.
+ */
+static void prvvUARTTxReadyISR( void )
+{
+ pxMBFrameCBTransmitterEmpty();
+}
+
+/* Create an interrupt handler for the receive interrupt for your target
+ * processor. This function should then call pxMBFrameCBByteReceived( ). The
+ * protocol stack will then call xMBPortSerialGetByte( ) to retrieve the
+ * character.
+ */
+static void prvvUARTRxISR( void )
+{
+ if(ser3.readable()) //stanlely RX ISR must contain getc
+ grx_buf=ser3.getc();
+
+ pxMBFrameCBByteReceived();
+}
+
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/port/porttimer.cpp Fri Mar 31 01:47:35 2017 +0000
@@ -0,0 +1,79 @@
+/*
+ * FreeModbus Libary: BARE Port
+ * Copyright (C) 2006 Christian Walter <wolti@sil.at>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * File: $Id: porttimer.c,v 1.1 2006/08/22 21:35:13 wolti Exp $
+ */
+
+/* ----------------------- System includes ----------------------------------*/
+#include "mbed.h" // Cam
+
+/* ----------------------- Platform includes --------------------------------*/
+#include "port.h"
+
+/* ----------------------- Modbus includes ----------------------------------*/
+#include "mb.h"
+#include "mbport.h"
+extern DigitalOut testD8; //stanley
+/* ----------------------- static functions ---------------------------------*/
+static void prvvTIMERExpiredISR( void );
+
+/* ----------------------- System Variables ---------------------------------*/
+Timeout toMBUS; // Cam - mbed timeout
+static ULONG usInterval; // Cam - timeout interval in microseconds
+
+/* ----------------------- Start implementation -----------------------------*/
+BOOL
+xMBPortTimersInit( USHORT usTim1Timerout50us )
+{
+ usInterval = 50 * usTim1Timerout50us;
+ return TRUE;
+}
+
+
+/*inline*/ void
+vMBPortTimersEnable( )
+{
+ /* Enable the timer with the timeout passed to xMBPortTimersInit( ) */
+
+ // Cam - firstly detach from any existing timeout
+ toMBUS.detach();
+ // Cam - now attach the timeout to the prvvTIMERExpiredISR routine
+ toMBUS.attach_us(&prvvTIMERExpiredISR, usInterval);
+}
+
+/*inline*/ void
+vMBPortTimersDisable( )
+{
+ /* Disable any pending timers. */
+
+ // Cam - disable further interrupts by detaching
+ toMBUS.detach();
+}
+
+/* Create an ISR which is called whenever the timer has expired. This function
+ * must then call pxMBPortCBTimerExpired( ) to notify the protocol stack that
+ * the timer has expired.
+ */
+static void prvvTIMERExpiredISR( void )
+{
+
+ (void)pxMBPortCBTimerExpired( );
+ // Cam - disable further interrupts by detaching
+ toMBUS.detach();
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/rtu/mbcrc.cpp Fri Mar 31 01:47:35 2017 +0000
@@ -0,0 +1,98 @@
+/*
+ * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
+ * Copyright (c) 2006 Christian Walter <wolti@sil.at>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * File: $Id: mbcrc.c,v 1.7 2007/02/18 23:50:27 wolti Exp $
+ */
+
+/* ----------------------- Platform includes --------------------------------*/
+#include "port.h"
+
+static const UCHAR aucCRCHi[] = {
+ 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
+ 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
+ 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
+ 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
+ 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
+ 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
+ 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
+ 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
+ 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
+ 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
+ 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
+ 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
+ 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
+ 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
+ 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
+ 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
+ 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
+ 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
+ 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
+ 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
+ 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
+ 0x00, 0xC1, 0x81, 0x40
+};
+
+static const UCHAR aucCRCLo[] = {
+ 0x00, 0xC0, 0xC1, 0x01, 0xC3, 0x03, 0x02, 0xC2, 0xC6, 0x06, 0x07, 0xC7,
+ 0x05, 0xC5, 0xC4, 0x04, 0xCC, 0x0C, 0x0D, 0xCD, 0x0F, 0xCF, 0xCE, 0x0E,
+ 0x0A, 0xCA, 0xCB, 0x0B, 0xC9, 0x09, 0x08, 0xC8, 0xD8, 0x18, 0x19, 0xD9,
+ 0x1B, 0xDB, 0xDA, 0x1A, 0x1E, 0xDE, 0xDF, 0x1F, 0xDD, 0x1D, 0x1C, 0xDC,
+ 0x14, 0xD4, 0xD5, 0x15, 0xD7, 0x17, 0x16, 0xD6, 0xD2, 0x12, 0x13, 0xD3,
+ 0x11, 0xD1, 0xD0, 0x10, 0xF0, 0x30, 0x31, 0xF1, 0x33, 0xF3, 0xF2, 0x32,
+ 0x36, 0xF6, 0xF7, 0x37, 0xF5, 0x35, 0x34, 0xF4, 0x3C, 0xFC, 0xFD, 0x3D,
+ 0xFF, 0x3F, 0x3E, 0xFE, 0xFA, 0x3A, 0x3B, 0xFB, 0x39, 0xF9, 0xF8, 0x38,
+ 0x28, 0xE8, 0xE9, 0x29, 0xEB, 0x2B, 0x2A, 0xEA, 0xEE, 0x2E, 0x2F, 0xEF,
+ 0x2D, 0xED, 0xEC, 0x2C, 0xE4, 0x24, 0x25, 0xE5, 0x27, 0xE7, 0xE6, 0x26,
+ 0x22, 0xE2, 0xE3, 0x23, 0xE1, 0x21, 0x20, 0xE0, 0xA0, 0x60, 0x61, 0xA1,
+ 0x63, 0xA3, 0xA2, 0x62, 0x66, 0xA6, 0xA7, 0x67, 0xA5, 0x65, 0x64, 0xA4,
+ 0x6C, 0xAC, 0xAD, 0x6D, 0xAF, 0x6F, 0x6E, 0xAE, 0xAA, 0x6A, 0x6B, 0xAB,
+ 0x69, 0xA9, 0xA8, 0x68, 0x78, 0xB8, 0xB9, 0x79, 0xBB, 0x7B, 0x7A, 0xBA,
+ 0xBE, 0x7E, 0x7F, 0xBF, 0x7D, 0xBD, 0xBC, 0x7C, 0xB4, 0x74, 0x75, 0xB5,
+ 0x77, 0xB7, 0xB6, 0x76, 0x72, 0xB2, 0xB3, 0x73, 0xB1, 0x71, 0x70, 0xB0,
+ 0x50, 0x90, 0x91, 0x51, 0x93, 0x53, 0x52, 0x92, 0x96, 0x56, 0x57, 0x97,
+ 0x55, 0x95, 0x94, 0x54, 0x9C, 0x5C, 0x5D, 0x9D, 0x5F, 0x9F, 0x9E, 0x5E,
+ 0x5A, 0x9A, 0x9B, 0x5B, 0x99, 0x59, 0x58, 0x98, 0x88, 0x48, 0x49, 0x89,
+ 0x4B, 0x8B, 0x8A, 0x4A, 0x4E, 0x8E, 0x8F, 0x4F, 0x8D, 0x4D, 0x4C, 0x8C,
+ 0x44, 0x84, 0x85, 0x45, 0x87, 0x47, 0x46, 0x86, 0x82, 0x42, 0x43, 0x83,
+ 0x41, 0x81, 0x80, 0x40
+};
+
+USHORT
+usMBCRC16( UCHAR * pucFrame, USHORT usLen )
+{
+ UCHAR ucCRCHi = 0xFF;
+ UCHAR ucCRCLo = 0xFF;
+ int iIndex;
+
+ while( usLen-- )
+ {
+ iIndex = ucCRCLo ^ *( pucFrame++ );
+ ucCRCLo = ( UCHAR )( ucCRCHi ^ aucCRCHi[iIndex] );
+ ucCRCHi = aucCRCLo[iIndex];
+ }
+ return ( USHORT )( ucCRCHi << 8 | ucCRCLo );
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/rtu/mbcrc.h Fri Mar 31 01:47:35 2017 +0000 @@ -0,0 +1,36 @@ +/* + * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU. + * Copyright (c) 2006 Christian Walter <wolti@sil.at> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * File: $Id: mbcrc.h,v 1.5 2006/12/07 22:10:34 wolti Exp $ + */ + +#ifndef _MB_CRC_H +#define _MB_CRC_H + +USHORT usMBCRC16( UCHAR * pucFrame, USHORT usLen ); + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/rtu/mbrtu.cpp Fri Mar 31 01:47:35 2017 +0000
@@ -0,0 +1,361 @@
+/*
+ * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
+ * Copyright (c) 2006 Christian Walter <wolti@sil.at>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * File: $Id: mbrtu.c,v 1.18 2007/09/12 10:15:56 wolti Exp $
+ */
+
+/* ----------------------- System includes ----------------------------------*/
+#include "stdlib.h"
+#include "string.h"
+
+/* ----------------------- Platform includes --------------------------------*/
+#include "port.h"
+
+/* ----------------------- Modbus includes ----------------------------------*/
+#include "mb.h"
+#include "mbrtu.h"
+#include "mbframe.h"
+
+#include "mbcrc.h"
+#include "mbport.h"
+
+/* ----------------------- Defines ------------------------------------------*/
+#define MB_SER_PDU_SIZE_MIN 4 /*!< Minimum size of a Modbus RTU frame. */
+#define MB_SER_PDU_SIZE_MAX 256 /*!< Maximum size of a Modbus RTU frame. */
+#define MB_SER_PDU_SIZE_CRC 2 /*!< Size of CRC field in PDU. */
+#define MB_SER_PDU_ADDR_OFF 0 /*!< Offset of slave address in Ser-PDU. */
+#define MB_SER_PDU_PDU_OFF 1 /*!< Offset of Modbus-PDU in Ser-PDU. */
+
+/* ----------------------- Type definitions ---------------------------------*/
+typedef enum
+{
+ STATE_RX_INIT, /*!< Receiver is in initial state. */
+ STATE_RX_IDLE, /*!< Receiver is in idle state. */
+ STATE_RX_RCV, /*!< Frame is beeing received. */
+ STATE_RX_ERROR /*!< If the frame is invalid. */
+} eMBRcvState;
+
+typedef enum
+{
+ STATE_TX_IDLE, /*!< Transmitter is in idle state. */
+ STATE_TX_XMIT /*!< Transmitter is in transfer state. */
+} eMBSndState;
+
+/* ----------------------- Static variables ---------------------------------*/
+static volatile eMBSndState eSndState;
+static volatile eMBRcvState eRcvState;
+
+volatile UCHAR ucRTUBuf[MB_SER_PDU_SIZE_MAX];
+
+static volatile UCHAR *pucSndBufferCur;
+static volatile USHORT usSndBufferCount;
+
+static volatile USHORT usRcvBufferPos;
+
+/* ----------------------- Start implementation -----------------------------*/
+eMBErrorCode
+eMBRTUInit( UCHAR ucSlaveAddress, UCHAR ucPort, ULONG ulBaudRate, eMBParity eParity )
+{
+ eMBErrorCode eStatus = MB_ENOERR;
+ ULONG usTimerT35_50us;
+
+ ( void )ucSlaveAddress;
+ ENTER_CRITICAL_SECTION( );
+
+ /* Modbus RTU uses 8 Databits. */
+ if( xMBPortSerialInit( ucPort, ulBaudRate, 8, eParity ) != TRUE )
+ {
+ eStatus = MB_EPORTERR;
+ }
+ else
+ {
+ /* If baudrate > 19200 then we should use the fixed timer values
+ * t35 = 1750us. Otherwise t35 must be 3.5 times the character time.
+ */
+ if( ulBaudRate > 19200 )
+ {
+ usTimerT35_50us = 35; /* 1800us. */
+ }
+ else
+ {
+ /* The timer reload value for a character is given by:
+ *
+ * ChTimeValue = Ticks_per_1s / ( Baudrate / 11 )
+ * = 11 * Ticks_per_1s / Baudrate
+ * = 220000 / Baudrate
+ * The reload for t3.5 is 1.5 times this value and similary
+ * for t3.5.
+ */
+ usTimerT35_50us = ( 7UL * 220000UL ) / ( 2UL * ulBaudRate );
+ }
+ if( xMBPortTimersInit( ( USHORT ) usTimerT35_50us ) != TRUE )
+ {
+ eStatus = MB_EPORTERR;
+ }
+ }
+ EXIT_CRITICAL_SECTION( );
+
+ return eStatus;
+}
+
+void
+eMBRTUStart( void )
+{
+ ENTER_CRITICAL_SECTION( );
+ /* Initially the receiver is in the state STATE_RX_INIT. we start
+ * the timer and if no character is received within t3.5 we change
+ * to STATE_RX_IDLE. This makes sure that we delay startup of the
+ * modbus protocol stack until the bus is free.
+ */
+ eRcvState = STATE_RX_INIT;
+ vMBPortSerialEnable( TRUE, FALSE );
+ vMBPortTimersEnable( );
+
+ EXIT_CRITICAL_SECTION( );
+}
+
+void
+eMBRTUStop( void )
+{
+ ENTER_CRITICAL_SECTION( );
+ vMBPortSerialEnable( FALSE, FALSE );
+ vMBPortTimersDisable( );
+ EXIT_CRITICAL_SECTION( );
+}
+
+eMBErrorCode
+eMBRTUReceive( UCHAR * pucRcvAddress, UCHAR ** pucFrame, USHORT * pusLength )
+{
+ BOOL xFrameReceived = FALSE;
+ eMBErrorCode eStatus = MB_ENOERR;
+
+ ENTER_CRITICAL_SECTION( );
+ assert( usRcvBufferPos < MB_SER_PDU_SIZE_MAX );
+
+ /* Length and CRC check */
+ if( ( usRcvBufferPos >= MB_SER_PDU_SIZE_MIN )
+ && ( usMBCRC16( ( UCHAR * ) ucRTUBuf, usRcvBufferPos ) == 0 ) )
+ {
+ /* Save the address field. All frames are passed to the upper layed
+ * and the decision if a frame is used is done there.
+ */
+ *pucRcvAddress = ucRTUBuf[MB_SER_PDU_ADDR_OFF];
+
+ /* Total length of Modbus-PDU is Modbus-Serial-Line-PDU minus
+ * size of address field and CRC checksum.
+ */
+ *pusLength = ( USHORT )( usRcvBufferPos - MB_SER_PDU_PDU_OFF - MB_SER_PDU_SIZE_CRC );
+
+ /* Return the start of the Modbus PDU to the caller. */
+ *pucFrame = ( UCHAR * ) & ucRTUBuf[MB_SER_PDU_PDU_OFF];
+ xFrameReceived = TRUE;
+
+ // Added by Cam
+ // Now that the poll routine knows about the received frame,
+ // clear the receive buffer position ready for the next frame received
+ //usRcvBufferPos = 0;
+
+ }
+ else
+ {
+ eStatus = MB_EIO;
+ }
+
+ EXIT_CRITICAL_SECTION( );
+ return eStatus;
+}
+
+eMBErrorCode
+eMBRTUSend( UCHAR ucSlaveAddress, const UCHAR * pucFrame, USHORT usLength )
+{
+ eMBErrorCode eStatus = MB_ENOERR;
+ USHORT usCRC16;
+
+ ENTER_CRITICAL_SECTION( );
+
+ /* Check if the receiver is still in idle state. If not we where to
+ * slow with processing the received frame and the master sent another
+ * frame on the network. We have to abort sending the frame.
+ */
+ if( eRcvState == STATE_RX_IDLE )
+ {
+ /* First byte before the Modbus-PDU is the slave address. */
+ pucSndBufferCur = ( UCHAR * ) pucFrame - 1;
+ usSndBufferCount = 1;
+
+ /* Now copy the Modbus-PDU into the Modbus-Serial-Line-PDU. */
+ pucSndBufferCur[MB_SER_PDU_ADDR_OFF] = ucSlaveAddress;
+ usSndBufferCount += usLength;
+
+ /* Calculate CRC16 checksum for Modbus-Serial-Line-PDU. */
+ usCRC16 = usMBCRC16( ( UCHAR * ) pucSndBufferCur, usSndBufferCount );
+ ucRTUBuf[usSndBufferCount++] = ( UCHAR )( usCRC16 & 0xFF );
+ ucRTUBuf[usSndBufferCount++] = ( UCHAR )( usCRC16 >> 8 );
+
+ /* Activate the transmitter. */
+ eSndState = STATE_TX_XMIT;
+ vMBPortSerialEnable( FALSE, TRUE );
+ }
+ else
+ {
+ eStatus = MB_EIO;
+ }
+ EXIT_CRITICAL_SECTION( );
+ return eStatus;
+}
+
+BOOL
+xMBRTUReceiveFSM( void )
+{
+ BOOL xTaskNeedSwitch = FALSE;
+ UCHAR ucByte;
+
+ assert( eSndState == STATE_TX_IDLE );
+
+ /* Always read the character. */
+ ( void )xMBPortSerialGetByte( ( CHAR * ) & ucByte );
+
+ switch ( eRcvState )
+ {
+ /* If we have received a character in the init state we have to
+ * wait until the frame is finished.
+ */
+ case STATE_RX_INIT:
+ vMBPortTimersEnable( );
+ break;
+
+ /* In the error state we wait until all characters in the
+ * damaged frame are transmitted.
+ */
+ case STATE_RX_ERROR:
+ vMBPortTimersEnable( );
+ break;
+
+ /* In the idle state we wait for a new character. If a character
+ * is received the t1.5 and t3.5 timers are started and the
+ * receiver is in the state STATE_RX_RECEIVCE.
+ */
+ case STATE_RX_IDLE:
+ usRcvBufferPos = 0; //cam will comment this
+ ucRTUBuf[usRcvBufferPos++] = ucByte;
+ eRcvState = STATE_RX_RCV;
+
+ /* Enable t3.5 timers. */
+ vMBPortTimersEnable( );
+ break;
+
+ /* We are currently receiving a frame. Reset the timer after
+ * every character received. If more than the maximum possible
+ * number of bytes in a modbus frame is received the frame is
+ * ignored.
+ */
+ case STATE_RX_RCV:
+ if( usRcvBufferPos < MB_SER_PDU_SIZE_MAX )
+ {
+ ucRTUBuf[usRcvBufferPos++] = ucByte;
+ }
+ else
+ {
+ eRcvState = STATE_RX_ERROR;
+ }
+ vMBPortTimersEnable( );
+ break;
+ }
+ return xTaskNeedSwitch;
+}
+
+BOOL
+xMBRTUTransmitFSM( void )
+{
+ BOOL xNeedPoll = FALSE;
+
+ assert( eRcvState == STATE_RX_IDLE );
+
+ switch ( eSndState )
+ {
+ /* We should not get a transmitter event if the transmitter is in
+ * idle state. */
+ case STATE_TX_IDLE:
+ /* enable receiver/disable transmitter. */
+ vMBPortSerialEnable( TRUE, FALSE );
+ break;
+
+ case STATE_TX_XMIT:
+ /* check if we are finished. */
+ if( usSndBufferCount != 0 )
+ {
+ xMBPortSerialPutByte( ( CHAR )*pucSndBufferCur );
+ pucSndBufferCur++; /* next byte in sendbuffer. */
+ usSndBufferCount--;
+ }
+ else
+ {
+ xNeedPoll = xMBPortEventPost( EV_FRAME_SENT );
+ /* Disable transmitter. This prevents another transmit buffer
+ * empty interrupt. */
+ vMBPortSerialEnable( TRUE, FALSE );
+ eSndState = STATE_TX_IDLE;
+ }
+ break;
+ }
+
+ return xNeedPoll;
+}
+
+BOOL
+xMBRTUTimerT35Expired( void )
+{
+ BOOL xNeedPoll = FALSE;
+
+ switch ( eRcvState )
+ {
+ /* Timer t35 expired. Startup phase is finished. */
+ case STATE_RX_INIT:
+ xNeedPoll = xMBPortEventPost( EV_READY );
+ break;
+
+ /* A frame was received and t35 expired. Notify the listener that
+ * a new frame was received. */
+ case STATE_RX_RCV:
+ xNeedPoll = xMBPortEventPost( EV_FRAME_RECEIVED );
+ break;
+
+ /* An error occured while receiving the frame. */
+ case STATE_RX_ERROR:
+ break;
+
+ /* Function called in an illegal state. */
+ default:
+ assert( ( eRcvState == STATE_RX_INIT ) ||
+ ( eRcvState == STATE_RX_RCV ) || ( eRcvState == STATE_RX_ERROR ) );
+ }
+
+ vMBPortTimersDisable( );
+ eRcvState = STATE_RX_IDLE;
+
+ return xNeedPoll;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/rtu/mbrtu.h Fri Mar 31 01:47:35 2017 +0000 @@ -0,0 +1,51 @@ +/* + * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU. + * Copyright (c) 2006 Christian Walter <wolti@sil.at> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * File: $Id: mbrtu.h,v 1.9 2006/12/07 22:10:34 wolti Exp $ + */ + +#ifndef _MB_RTU_H +#define _MB_RTU_H + +#ifdef __cplusplus +PR_BEGIN_EXTERN_C +#endif + eMBErrorCode eMBRTUInit( UCHAR slaveAddress, UCHAR ucPort, ULONG ulBaudRate, + eMBParity eParity ); +void eMBRTUStart( void ); +void eMBRTUStop( void ); +eMBErrorCode eMBRTUReceive( UCHAR * pucRcvAddress, UCHAR ** pucFrame, USHORT * pusLength ); +eMBErrorCode eMBRTUSend( UCHAR slaveAddress, const UCHAR * pucFrame, USHORT usLength ); +BOOL xMBRTUReceiveFSM( void ); +BOOL xMBRTUTransmitFSM( void ); +BOOL xMBRTUTimerT15Expired( void ); +BOOL xMBRTUTimerT35Expired( void ); + +#ifdef __cplusplus +PR_END_EXTERN_C +#endif +#endif