1.original from Cam Marshall 2.use for F446RE Test 3.use the interrupt method of uart 4.not change to RTOS yet
Dependents: RoboticArm Modbus_Gripper_Test
Diff: rtu/mbrtu.cpp
- Revision:
- 0:aefcdfe9ca2f
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/rtu/mbrtu.cpp Fri Mar 31 01:47:35 2017 +0000 @@ -0,0 +1,361 @@ +/* + * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU. + * Copyright (c) 2006 Christian Walter <wolti@sil.at> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * File: $Id: mbrtu.c,v 1.18 2007/09/12 10:15:56 wolti Exp $ + */ + +/* ----------------------- System includes ----------------------------------*/ +#include "stdlib.h" +#include "string.h" + +/* ----------------------- Platform includes --------------------------------*/ +#include "port.h" + +/* ----------------------- Modbus includes ----------------------------------*/ +#include "mb.h" +#include "mbrtu.h" +#include "mbframe.h" + +#include "mbcrc.h" +#include "mbport.h" + +/* ----------------------- Defines ------------------------------------------*/ +#define MB_SER_PDU_SIZE_MIN 4 /*!< Minimum size of a Modbus RTU frame. */ +#define MB_SER_PDU_SIZE_MAX 256 /*!< Maximum size of a Modbus RTU frame. */ +#define MB_SER_PDU_SIZE_CRC 2 /*!< Size of CRC field in PDU. */ +#define MB_SER_PDU_ADDR_OFF 0 /*!< Offset of slave address in Ser-PDU. */ +#define MB_SER_PDU_PDU_OFF 1 /*!< Offset of Modbus-PDU in Ser-PDU. */ + +/* ----------------------- Type definitions ---------------------------------*/ +typedef enum +{ + STATE_RX_INIT, /*!< Receiver is in initial state. */ + STATE_RX_IDLE, /*!< Receiver is in idle state. */ + STATE_RX_RCV, /*!< Frame is beeing received. */ + STATE_RX_ERROR /*!< If the frame is invalid. */ +} eMBRcvState; + +typedef enum +{ + STATE_TX_IDLE, /*!< Transmitter is in idle state. */ + STATE_TX_XMIT /*!< Transmitter is in transfer state. */ +} eMBSndState; + +/* ----------------------- Static variables ---------------------------------*/ +static volatile eMBSndState eSndState; +static volatile eMBRcvState eRcvState; + +volatile UCHAR ucRTUBuf[MB_SER_PDU_SIZE_MAX]; + +static volatile UCHAR *pucSndBufferCur; +static volatile USHORT usSndBufferCount; + +static volatile USHORT usRcvBufferPos; + +/* ----------------------- Start implementation -----------------------------*/ +eMBErrorCode +eMBRTUInit( UCHAR ucSlaveAddress, UCHAR ucPort, ULONG ulBaudRate, eMBParity eParity ) +{ + eMBErrorCode eStatus = MB_ENOERR; + ULONG usTimerT35_50us; + + ( void )ucSlaveAddress; + ENTER_CRITICAL_SECTION( ); + + /* Modbus RTU uses 8 Databits. */ + if( xMBPortSerialInit( ucPort, ulBaudRate, 8, eParity ) != TRUE ) + { + eStatus = MB_EPORTERR; + } + else + { + /* If baudrate > 19200 then we should use the fixed timer values + * t35 = 1750us. Otherwise t35 must be 3.5 times the character time. + */ + if( ulBaudRate > 19200 ) + { + usTimerT35_50us = 35; /* 1800us. */ + } + else + { + /* The timer reload value for a character is given by: + * + * ChTimeValue = Ticks_per_1s / ( Baudrate / 11 ) + * = 11 * Ticks_per_1s / Baudrate + * = 220000 / Baudrate + * The reload for t3.5 is 1.5 times this value and similary + * for t3.5. + */ + usTimerT35_50us = ( 7UL * 220000UL ) / ( 2UL * ulBaudRate ); + } + if( xMBPortTimersInit( ( USHORT ) usTimerT35_50us ) != TRUE ) + { + eStatus = MB_EPORTERR; + } + } + EXIT_CRITICAL_SECTION( ); + + return eStatus; +} + +void +eMBRTUStart( void ) +{ + ENTER_CRITICAL_SECTION( ); + /* Initially the receiver is in the state STATE_RX_INIT. we start + * the timer and if no character is received within t3.5 we change + * to STATE_RX_IDLE. This makes sure that we delay startup of the + * modbus protocol stack until the bus is free. + */ + eRcvState = STATE_RX_INIT; + vMBPortSerialEnable( TRUE, FALSE ); + vMBPortTimersEnable( ); + + EXIT_CRITICAL_SECTION( ); +} + +void +eMBRTUStop( void ) +{ + ENTER_CRITICAL_SECTION( ); + vMBPortSerialEnable( FALSE, FALSE ); + vMBPortTimersDisable( ); + EXIT_CRITICAL_SECTION( ); +} + +eMBErrorCode +eMBRTUReceive( UCHAR * pucRcvAddress, UCHAR ** pucFrame, USHORT * pusLength ) +{ + BOOL xFrameReceived = FALSE; + eMBErrorCode eStatus = MB_ENOERR; + + ENTER_CRITICAL_SECTION( ); + assert( usRcvBufferPos < MB_SER_PDU_SIZE_MAX ); + + /* Length and CRC check */ + if( ( usRcvBufferPos >= MB_SER_PDU_SIZE_MIN ) + && ( usMBCRC16( ( UCHAR * ) ucRTUBuf, usRcvBufferPos ) == 0 ) ) + { + /* Save the address field. All frames are passed to the upper layed + * and the decision if a frame is used is done there. + */ + *pucRcvAddress = ucRTUBuf[MB_SER_PDU_ADDR_OFF]; + + /* Total length of Modbus-PDU is Modbus-Serial-Line-PDU minus + * size of address field and CRC checksum. + */ + *pusLength = ( USHORT )( usRcvBufferPos - MB_SER_PDU_PDU_OFF - MB_SER_PDU_SIZE_CRC ); + + /* Return the start of the Modbus PDU to the caller. */ + *pucFrame = ( UCHAR * ) & ucRTUBuf[MB_SER_PDU_PDU_OFF]; + xFrameReceived = TRUE; + + // Added by Cam + // Now that the poll routine knows about the received frame, + // clear the receive buffer position ready for the next frame received + //usRcvBufferPos = 0; + + } + else + { + eStatus = MB_EIO; + } + + EXIT_CRITICAL_SECTION( ); + return eStatus; +} + +eMBErrorCode +eMBRTUSend( UCHAR ucSlaveAddress, const UCHAR * pucFrame, USHORT usLength ) +{ + eMBErrorCode eStatus = MB_ENOERR; + USHORT usCRC16; + + ENTER_CRITICAL_SECTION( ); + + /* Check if the receiver is still in idle state. If not we where to + * slow with processing the received frame and the master sent another + * frame on the network. We have to abort sending the frame. + */ + if( eRcvState == STATE_RX_IDLE ) + { + /* First byte before the Modbus-PDU is the slave address. */ + pucSndBufferCur = ( UCHAR * ) pucFrame - 1; + usSndBufferCount = 1; + + /* Now copy the Modbus-PDU into the Modbus-Serial-Line-PDU. */ + pucSndBufferCur[MB_SER_PDU_ADDR_OFF] = ucSlaveAddress; + usSndBufferCount += usLength; + + /* Calculate CRC16 checksum for Modbus-Serial-Line-PDU. */ + usCRC16 = usMBCRC16( ( UCHAR * ) pucSndBufferCur, usSndBufferCount ); + ucRTUBuf[usSndBufferCount++] = ( UCHAR )( usCRC16 & 0xFF ); + ucRTUBuf[usSndBufferCount++] = ( UCHAR )( usCRC16 >> 8 ); + + /* Activate the transmitter. */ + eSndState = STATE_TX_XMIT; + vMBPortSerialEnable( FALSE, TRUE ); + } + else + { + eStatus = MB_EIO; + } + EXIT_CRITICAL_SECTION( ); + return eStatus; +} + +BOOL +xMBRTUReceiveFSM( void ) +{ + BOOL xTaskNeedSwitch = FALSE; + UCHAR ucByte; + + assert( eSndState == STATE_TX_IDLE ); + + /* Always read the character. */ + ( void )xMBPortSerialGetByte( ( CHAR * ) & ucByte ); + + switch ( eRcvState ) + { + /* If we have received a character in the init state we have to + * wait until the frame is finished. + */ + case STATE_RX_INIT: + vMBPortTimersEnable( ); + break; + + /* In the error state we wait until all characters in the + * damaged frame are transmitted. + */ + case STATE_RX_ERROR: + vMBPortTimersEnable( ); + break; + + /* In the idle state we wait for a new character. If a character + * is received the t1.5 and t3.5 timers are started and the + * receiver is in the state STATE_RX_RECEIVCE. + */ + case STATE_RX_IDLE: + usRcvBufferPos = 0; //cam will comment this + ucRTUBuf[usRcvBufferPos++] = ucByte; + eRcvState = STATE_RX_RCV; + + /* Enable t3.5 timers. */ + vMBPortTimersEnable( ); + break; + + /* We are currently receiving a frame. Reset the timer after + * every character received. If more than the maximum possible + * number of bytes in a modbus frame is received the frame is + * ignored. + */ + case STATE_RX_RCV: + if( usRcvBufferPos < MB_SER_PDU_SIZE_MAX ) + { + ucRTUBuf[usRcvBufferPos++] = ucByte; + } + else + { + eRcvState = STATE_RX_ERROR; + } + vMBPortTimersEnable( ); + break; + } + return xTaskNeedSwitch; +} + +BOOL +xMBRTUTransmitFSM( void ) +{ + BOOL xNeedPoll = FALSE; + + assert( eRcvState == STATE_RX_IDLE ); + + switch ( eSndState ) + { + /* We should not get a transmitter event if the transmitter is in + * idle state. */ + case STATE_TX_IDLE: + /* enable receiver/disable transmitter. */ + vMBPortSerialEnable( TRUE, FALSE ); + break; + + case STATE_TX_XMIT: + /* check if we are finished. */ + if( usSndBufferCount != 0 ) + { + xMBPortSerialPutByte( ( CHAR )*pucSndBufferCur ); + pucSndBufferCur++; /* next byte in sendbuffer. */ + usSndBufferCount--; + } + else + { + xNeedPoll = xMBPortEventPost( EV_FRAME_SENT ); + /* Disable transmitter. This prevents another transmit buffer + * empty interrupt. */ + vMBPortSerialEnable( TRUE, FALSE ); + eSndState = STATE_TX_IDLE; + } + break; + } + + return xNeedPoll; +} + +BOOL +xMBRTUTimerT35Expired( void ) +{ + BOOL xNeedPoll = FALSE; + + switch ( eRcvState ) + { + /* Timer t35 expired. Startup phase is finished. */ + case STATE_RX_INIT: + xNeedPoll = xMBPortEventPost( EV_READY ); + break; + + /* A frame was received and t35 expired. Notify the listener that + * a new frame was received. */ + case STATE_RX_RCV: + xNeedPoll = xMBPortEventPost( EV_FRAME_RECEIVED ); + break; + + /* An error occured while receiving the frame. */ + case STATE_RX_ERROR: + break; + + /* Function called in an illegal state. */ + default: + assert( ( eRcvState == STATE_RX_INIT ) || + ( eRcvState == STATE_RX_RCV ) || ( eRcvState == STATE_RX_ERROR ) ); + } + + vMBPortTimersDisable( ); + eRcvState = STATE_RX_IDLE; + + return xNeedPoll; +}