hsu han-lin / Modbus_For_F446RE

1.original from Cam Marshall 2.use for F446RE Test 3.use the interrupt method of uart 4.not change to RTOS yet

Dependents:   RoboticArm Modbus_Gripper_Test

include/mbconfig.h@0:aefcdfe9ca2f, 2017-03-31 (annotated)

Committer:
stanley1228
Date:
Fri Mar 31 01:47:35 2017 +0000
Revision:
0:aefcdfe9ca2f
1.change the file in "port" folder to F446RE use

Who changed what in which revision?

UserRevisionLine numberNew contents of line
stanley1228 0:aefcdfe9ca2f 1 /*
stanley1228 0:aefcdfe9ca2f 2 * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
stanley1228 0:aefcdfe9ca2f 3 * Copyright (c) 2006 Christian Walter <wolti@sil.at>
stanley1228 0:aefcdfe9ca2f 4 * All rights reserved.
stanley1228 0:aefcdfe9ca2f 5 *
stanley1228 0:aefcdfe9ca2f 6 * Redistribution and use in source and binary forms, with or without
stanley1228 0:aefcdfe9ca2f 7 * modification, are permitted provided that the following conditions
stanley1228 0:aefcdfe9ca2f 8 * are met:
stanley1228 0:aefcdfe9ca2f 9 * 1. Redistributions of source code must retain the above copyright
stanley1228 0:aefcdfe9ca2f 10 * notice, this list of conditions and the following disclaimer.
stanley1228 0:aefcdfe9ca2f 11 * 2. Redistributions in binary form must reproduce the above copyright
stanley1228 0:aefcdfe9ca2f 12 * notice, this list of conditions and the following disclaimer in the
stanley1228 0:aefcdfe9ca2f 13 * documentation and/or other materials provided with the distribution.
stanley1228 0:aefcdfe9ca2f 14 * 3. The name of the author may not be used to endorse or promote products
stanley1228 0:aefcdfe9ca2f 15 * derived from this software without specific prior written permission.
stanley1228 0:aefcdfe9ca2f 16 *
stanley1228 0:aefcdfe9ca2f 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
stanley1228 0:aefcdfe9ca2f 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
stanley1228 0:aefcdfe9ca2f 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
stanley1228 0:aefcdfe9ca2f 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
stanley1228 0:aefcdfe9ca2f 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
stanley1228 0:aefcdfe9ca2f 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
stanley1228 0:aefcdfe9ca2f 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
stanley1228 0:aefcdfe9ca2f 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
stanley1228 0:aefcdfe9ca2f 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
stanley1228 0:aefcdfe9ca2f 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
stanley1228 0:aefcdfe9ca2f 27 *
stanley1228 0:aefcdfe9ca2f 28 * File: $Id: mbconfig.h,v 1.14 2006/12/07 22:10:34 wolti Exp $
stanley1228 0:aefcdfe9ca2f 29 */
stanley1228 0:aefcdfe9ca2f 30
stanley1228 0:aefcdfe9ca2f 31 #ifndef _MB_CONFIG_H
stanley1228 0:aefcdfe9ca2f 32 #define _MB_CONFIG_H
stanley1228 0:aefcdfe9ca2f 33
stanley1228 0:aefcdfe9ca2f 34 #ifdef __cplusplus
stanley1228 0:aefcdfe9ca2f 35 PR_BEGIN_EXTERN_C
stanley1228 0:aefcdfe9ca2f 36 #endif
stanley1228 0:aefcdfe9ca2f 37 /* ----------------------- Defines ------------------------------------------*/
stanley1228 0:aefcdfe9ca2f 38 /*! \defgroup modbus_cfg Modbus Configuration
stanley1228 0:aefcdfe9ca2f 39 *
stanley1228 0:aefcdfe9ca2f 40 * Most modules in the protocol stack are completly optional and can be
stanley1228 0:aefcdfe9ca2f 41 * excluded. This is specially important if target resources are very small
stanley1228 0:aefcdfe9ca2f 42 * and program memory space should be saved.<br>
stanley1228 0:aefcdfe9ca2f 43 *
stanley1228 0:aefcdfe9ca2f 44 * All of these settings are available in the file <code>mbconfig.h</code>
stanley1228 0:aefcdfe9ca2f 45 */
stanley1228 0:aefcdfe9ca2f 46 /*! \addtogroup modbus_cfg
stanley1228 0:aefcdfe9ca2f 47 * @{
stanley1228 0:aefcdfe9ca2f 48 */
stanley1228 0:aefcdfe9ca2f 49 /*! \brief If Modbus ASCII support is enabled. */
stanley1228 0:aefcdfe9ca2f 50 #define MB_ASCII_ENABLED ( 0 )
stanley1228 0:aefcdfe9ca2f 51 /*! \brief If Modbus RTU support is enabled. */
stanley1228 0:aefcdfe9ca2f 52 #define MB_RTU_ENABLED ( 1 )
stanley1228 0:aefcdfe9ca2f 53 /*! \brief If Modbus TCP support is enabled. */
stanley1228 0:aefcdfe9ca2f 54 #define MB_TCP_ENABLED ( 0 )
stanley1228 0:aefcdfe9ca2f 55 /*! \brief The character timeout value for Modbus ASCII.
stanley1228 0:aefcdfe9ca2f 56 *
stanley1228 0:aefcdfe9ca2f 57 * The character timeout value is not fixed for Modbus ASCII and is therefore
stanley1228 0:aefcdfe9ca2f 58 * a configuration option. It should be set to the maximum expected delay
stanley1228 0:aefcdfe9ca2f 59 * time of the network.
stanley1228 0:aefcdfe9ca2f 60 */
stanley1228 0:aefcdfe9ca2f 61 #define MB_ASCII_TIMEOUT_SEC ( 0 )
stanley1228 0:aefcdfe9ca2f 62 /*! \brief Maximum number of Modbus functions codes the protocol stack
stanley1228 0:aefcdfe9ca2f 63 * should support.
stanley1228 0:aefcdfe9ca2f 64 *
stanley1228 0:aefcdfe9ca2f 65 * The maximum number of supported Modbus functions must be greater than
stanley1228 0:aefcdfe9ca2f 66 * the sum of all enabled functions in this file and custom function
stanley1228 0:aefcdfe9ca2f 67 * handlers. If set to small adding more functions will fail.
stanley1228 0:aefcdfe9ca2f 68 */
stanley1228 0:aefcdfe9ca2f 69 #define MB_FUNC_HANDLERS_MAX ( 16 )
stanley1228 0:aefcdfe9ca2f 70 /*! \brief Number of bytes which should be allocated for the <em>Report Slave ID
stanley1228 0:aefcdfe9ca2f 71 * </em>command.
stanley1228 0:aefcdfe9ca2f 72 *
stanley1228 0:aefcdfe9ca2f 73 * This number limits the maximum size of the additional segment in the
stanley1228 0:aefcdfe9ca2f 74 * report slave id function. See eMBSetSlaveID( ) for more information on
stanley1228 0:aefcdfe9ca2f 75 * how to set this value. It is only used if MB_FUNC_OTHER_REP_SLAVEID_ENABLED
stanley1228 0:aefcdfe9ca2f 76 * is set to <code>1</code>.
stanley1228 0:aefcdfe9ca2f 77 */
stanley1228 0:aefcdfe9ca2f 78 #define MB_FUNC_OTHER_REP_SLAVEID_BUF ( 32 )
stanley1228 0:aefcdfe9ca2f 79 /*! \brief If the <em>Report Slave ID</em> function should be enabled. */
stanley1228 0:aefcdfe9ca2f 80 #define MB_FUNC_OTHER_REP_SLAVEID_ENABLED ( 1 )
stanley1228 0:aefcdfe9ca2f 81 /*! \brief If the <em>Read Input Registers</em> function should be enabled. */
stanley1228 0:aefcdfe9ca2f 82 #define MB_FUNC_READ_INPUT_ENABLED ( 1 )
stanley1228 0:aefcdfe9ca2f 83 /*! \brief If the <em>Read Holding Registers</em> function should be enabled. */
stanley1228 0:aefcdfe9ca2f 84 #define MB_FUNC_READ_HOLDING_ENABLED ( 1 )
stanley1228 0:aefcdfe9ca2f 85 /*! \brief If the <em>Write Single Register</em> function should be enabled. */
stanley1228 0:aefcdfe9ca2f 86 #define MB_FUNC_WRITE_HOLDING_ENABLED ( 1 )
stanley1228 0:aefcdfe9ca2f 87 /*! \brief If the <em>Write Multiple registers</em> function should be enabled. */
stanley1228 0:aefcdfe9ca2f 88 #define MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED ( 1 )
stanley1228 0:aefcdfe9ca2f 89 /*! \brief If the <em>Read Coils</em> function should be enabled. */
stanley1228 0:aefcdfe9ca2f 90 #define MB_FUNC_READ_COILS_ENABLED ( 1 )
stanley1228 0:aefcdfe9ca2f 91 /*! \brief If the <em>Write Coils</em> function should be enabled. */
stanley1228 0:aefcdfe9ca2f 92 #define MB_FUNC_WRITE_COIL_ENABLED ( 1 )
stanley1228 0:aefcdfe9ca2f 93 /*! \brief If the <em>Write Multiple Coils</em> function should be enabled. */
stanley1228 0:aefcdfe9ca2f 94 #define MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED ( 1 )
stanley1228 0:aefcdfe9ca2f 95 /*! \brief If the <em>Read Discrete Inputs</em> function should be enabled. */
stanley1228 0:aefcdfe9ca2f 96 #define MB_FUNC_READ_DISCRETE_INPUTS_ENABLED ( 1 )
stanley1228 0:aefcdfe9ca2f 97 /*! \brief If the <em>Read/Write Multiple Registers</em> function should be enabled. */
stanley1228 0:aefcdfe9ca2f 98 #define MB_FUNC_READWRITE_HOLDING_ENABLED ( 1 )
stanley1228 0:aefcdfe9ca2f 99 /*! @} */
stanley1228 0:aefcdfe9ca2f 100 #ifdef __cplusplus
stanley1228 0:aefcdfe9ca2f 101 PR_END_EXTERN_C
stanley1228 0:aefcdfe9ca2f 102 #endif
stanley1228 0:aefcdfe9ca2f 103 #endif