Sam Musso / BLE_API

I don't know why this is happening.

Fork of BLE_API by Bluetooth Low Energy

services/UARTService.h@995:7249ab3ad1ab, 2016-02-05 (annotated)

Committer:
shibbs
Date:
Fri Feb 05 01:54:38 2016 +0000
Revision:
995:7249ab3ad1ab
Parent:
242:0e9201b67e2f
Child:
326:f79c1562312f
Un-changed the device info service; ;

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Rohit Grover 118:620d28e7a1ba 1 /* mbed Microcontroller Library
Rohit Grover 118:620d28e7a1ba 2 * Copyright (c) 2006-2013 ARM Limited
Rohit Grover 118:620d28e7a1ba 3 *
Rohit Grover 118:620d28e7a1ba 4 * Licensed under the Apache License, Version 2.0 (the "License");
Rohit Grover 118:620d28e7a1ba 5 * you may not use this file except in compliance with the License.
Rohit Grover 118:620d28e7a1ba 6 * You may obtain a copy of the License at
Rohit Grover 118:620d28e7a1ba 7 *
Rohit Grover 118:620d28e7a1ba 8 * http://www.apache.org/licenses/LICENSE-2.0
Rohit Grover 118:620d28e7a1ba 9 *
Rohit Grover 118:620d28e7a1ba 10 * Unless required by applicable law or agreed to in writing, software
Rohit Grover 118:620d28e7a1ba 11 * distributed under the License is distributed on an "AS IS" BASIS,
Rohit Grover 118:620d28e7a1ba 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
Rohit Grover 118:620d28e7a1ba 13 * See the License for the specific language governing permissions and
Rohit Grover 118:620d28e7a1ba 14 * limitations under the License.
Rohit Grover 118:620d28e7a1ba 15 */
Rohit Grover 118:620d28e7a1ba 16
Rohit Grover 118:620d28e7a1ba 17 #ifndef __BLE_UART_SERVICE_H__
Rohit Grover 118:620d28e7a1ba 18 #define __BLE_UART_SERVICE_H__
Rohit Grover 118:620d28e7a1ba 19
rgrover1 227:5c4cb4553821 20 #include "mbed.h"
Rohit Grover 118:620d28e7a1ba 21 #include "Stream.h"
Rohit Grover 118:620d28e7a1ba 22
Rohit Grover 118:620d28e7a1ba 23 #include "UUID.h"
Rohit Grover 118:620d28e7a1ba 24 #include "BLEDevice.h"
Rohit Grover 118:620d28e7a1ba 25
rgrover1 242:0e9201b67e2f 26 extern const uint8_t UARTServiceBaseUUID[LENGTH_OF_LONG_UUID];
Rohit Grover 118:620d28e7a1ba 27 extern const uint16_t UARTServiceShortUUID;
Rohit Grover 118:620d28e7a1ba 28 extern const uint16_t UARTServiceTXCharacteristicShortUUID;
Rohit Grover 118:620d28e7a1ba 29 extern const uint16_t UARTServiceRXCharacteristicShortUUID;
Rohit Grover 118:620d28e7a1ba 30
rgrover1 242:0e9201b67e2f 31 extern const uint8_t UARTServiceUUID[LENGTH_OF_LONG_UUID];
rgrover1 242:0e9201b67e2f 32 extern const uint8_t UARTServiceUUID_reversed[LENGTH_OF_LONG_UUID];
Rohit Grover 118:620d28e7a1ba 33
rgrover1 242:0e9201b67e2f 34 extern const uint8_t UARTServiceTXCharacteristicUUID[LENGTH_OF_LONG_UUID];
rgrover1 242:0e9201b67e2f 35 extern const uint8_t UARTServiceRXCharacteristicUUID[LENGTH_OF_LONG_UUID];
Rohit Grover 118:620d28e7a1ba 36
mbedAustin 233:4d570d99b8cb 37 /**
mbedAustin 233:4d570d99b8cb 38 * @class UARTService
rgrover1 242:0e9201b67e2f 39 * @brief BLE Service to enable UART over BLE
mbedAustin 233:4d570d99b8cb 40 */
rgrover1 197:5551036f054b 41 class UARTService {
Rohit Grover 118:620d28e7a1ba 42 public:
Rohit Grover 118:620d28e7a1ba 43 /**< Maximum length of data (in bytes) that can be transmitted by the UART service module to the peer. */
rgrover1 197:5551036f054b 44 static const unsigned GATT_MTU_SIZE_DEFAULT = 23;
Rohit Grover 118:620d28e7a1ba 45 static const unsigned BLE_UART_SERVICE_MAX_DATA_LEN = (GATT_MTU_SIZE_DEFAULT - 3);
Rohit Grover 118:620d28e7a1ba 46
Rohit Grover 118:620d28e7a1ba 47 public:
mbedAustin 233:4d570d99b8cb 48
mbedAustin 233:4d570d99b8cb 49 /**
mbedAustin 233:4d570d99b8cb 50 * @param[ref] ble
mbedAustin 233:4d570d99b8cb 51 * BLEDevice object for the underlying controller.
mbedAustin 233:4d570d99b8cb 52 */
Rohit Grover 118:620d28e7a1ba 53 UARTService(BLEDevice &_ble) :
Rohit Grover 118:620d28e7a1ba 54 ble(_ble),
Rohit Grover 118:620d28e7a1ba 55 receiveBuffer(),
Rohit Grover 118:620d28e7a1ba 56 sendBuffer(),
Rohit Grover 118:620d28e7a1ba 57 sendBufferIndex(0),
Rohit Grover 118:620d28e7a1ba 58 numBytesReceived(0),
Rohit Grover 118:620d28e7a1ba 59 receiveBufferIndex(0),
Rohit Grover 118:620d28e7a1ba 60 txCharacteristic(UARTServiceTXCharacteristicUUID, receiveBuffer, 1, BLE_UART_SERVICE_MAX_DATA_LEN,
Rohit Grover 118:620d28e7a1ba 61 GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE_WITHOUT_RESPONSE),
Rohit Grover 118:620d28e7a1ba 62 rxCharacteristic(UARTServiceRXCharacteristicUUID, sendBuffer, 1, BLE_UART_SERVICE_MAX_DATA_LEN, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY) {
Rohit Grover 118:620d28e7a1ba 63 GattCharacteristic *charTable[] = {&txCharacteristic, &rxCharacteristic};
Rohit Grover 118:620d28e7a1ba 64 GattService uartService(UARTServiceUUID, charTable, sizeof(charTable) / sizeof(GattCharacteristic *));
Rohit Grover 118:620d28e7a1ba 65
Rohit Grover 118:620d28e7a1ba 66 ble.addService(uartService);
Rohit Grover 118:620d28e7a1ba 67 ble.onDataWritten(this, &UARTService::onDataWritten);
Rohit Grover 118:620d28e7a1ba 68 }
Rohit Grover 118:620d28e7a1ba 69
Rohit Grover 118:620d28e7a1ba 70 /**
Rohit Grover 118:620d28e7a1ba 71 * Note: TX and RX characteristics are to be interpreted from the viewpoint of the GATT client using this service.
Rohit Grover 118:620d28e7a1ba 72 */
Rohit Grover 118:620d28e7a1ba 73 uint16_t getTXCharacteristicHandle() {
Rohit Grover 118:620d28e7a1ba 74 return txCharacteristic.getValueAttribute().getHandle();
Rohit Grover 118:620d28e7a1ba 75 }
Rohit Grover 118:620d28e7a1ba 76
Rohit Grover 118:620d28e7a1ba 77 /**
Rohit Grover 118:620d28e7a1ba 78 * Note: TX and RX characteristics are to be interpreted from the viewpoint of the GATT client using this service.
Rohit Grover 118:620d28e7a1ba 79 */
Rohit Grover 118:620d28e7a1ba 80 uint16_t getRXCharacteristicHandle() {
Rohit Grover 118:620d28e7a1ba 81 return rxCharacteristic.getValueAttribute().getHandle();
Rohit Grover 118:620d28e7a1ba 82 }
Rohit Grover 118:620d28e7a1ba 83
Rohit Grover 118:620d28e7a1ba 84 /**
Rohit Grover 118:620d28e7a1ba 85 * We attempt to collect bytes before pushing them to the UART RX
Rohit Grover 118:620d28e7a1ba 86 * characteristic--writing to the RX characteristic will then generate
Rohit Grover 118:620d28e7a1ba 87 * notifications for the client. Updates made in quick succession to a
Rohit Grover 118:620d28e7a1ba 88 * notification-generating characteristic will result in data being buffered
Rohit Grover 118:620d28e7a1ba 89 * in the bluetooth stack as notifications are sent out. The stack will have
Rohit Grover 118:620d28e7a1ba 90 * its limits for this buffering; typically a small number under 10.
Rohit Grover 118:620d28e7a1ba 91 * Collecting data into the sendBuffer buffer helps mitigate the rate of
Rohit Grover 118:620d28e7a1ba 92 * updates. But we shouldn't buffer a large amount of data before updating
Rohit Grover 118:620d28e7a1ba 93 * the characteristic otherwise the client will need to turn around and make
Rohit Grover 118:620d28e7a1ba 94 * a long read request; this is because notifications include only the first
Rohit Grover 118:620d28e7a1ba 95 * 20 bytes of the updated data.
Rohit Grover 118:620d28e7a1ba 96 *
Rohit Grover 118:620d28e7a1ba 97 * @param buffer The received update
Rohit Grover 118:620d28e7a1ba 98 * @param length Amount of characters to be appended.
Rohit Grover 118:620d28e7a1ba 99 * @return Amount of characters appended to the rxCharacteristic.
Rohit Grover 118:620d28e7a1ba 100 */
rgrover1 242:0e9201b67e2f 101 ssize_t write(const void *_buffer, size_t length) {
rgrover1 242:0e9201b67e2f 102 size_t origLength = length;
rgrover1 242:0e9201b67e2f 103 const uint8_t *buffer = static_cast<const uint8_t *>(_buffer);
Rohit Grover 118:620d28e7a1ba 104
Rohit Grover 118:620d28e7a1ba 105 if (ble.getGapState().connected) {
Rohit Grover 118:620d28e7a1ba 106 unsigned bufferIndex = 0;
Rohit Grover 118:620d28e7a1ba 107 while (length) {
Rohit Grover 118:620d28e7a1ba 108 unsigned bytesRemainingInSendBuffer = BLE_UART_SERVICE_MAX_DATA_LEN - sendBufferIndex;
rgrover1 242:0e9201b67e2f 109 unsigned bytesToCopy = (length < bytesRemainingInSendBuffer) ? length : bytesRemainingInSendBuffer;
Rohit Grover 118:620d28e7a1ba 110
Rohit Grover 118:620d28e7a1ba 111 /* copy bytes into sendBuffer */
Rohit Grover 118:620d28e7a1ba 112 memcpy(&sendBuffer[sendBufferIndex], &buffer[bufferIndex], bytesToCopy);
Rohit Grover 118:620d28e7a1ba 113 length -= bytesToCopy;
Rohit Grover 118:620d28e7a1ba 114 sendBufferIndex += bytesToCopy;
Rohit Grover 118:620d28e7a1ba 115 bufferIndex += bytesToCopy;
Rohit Grover 118:620d28e7a1ba 116
Rohit Grover 118:620d28e7a1ba 117 /* have we collected enough? */
Rohit Grover 118:620d28e7a1ba 118 if ((sendBufferIndex == BLE_UART_SERVICE_MAX_DATA_LEN) ||
Rohit Grover 118:620d28e7a1ba 119 // (sendBuffer[sendBufferIndex - 1] == '\r') ||
Rohit Grover 118:620d28e7a1ba 120 (sendBuffer[sendBufferIndex - 1] == '\n')) {
Rohit Grover 118:620d28e7a1ba 121 ble.updateCharacteristicValue(getRXCharacteristicHandle(), static_cast<const uint8_t *>(sendBuffer), sendBufferIndex);
Rohit Grover 118:620d28e7a1ba 122 sendBufferIndex = 0;
Rohit Grover 118:620d28e7a1ba 123 }
Rohit Grover 118:620d28e7a1ba 124 }
Rohit Grover 118:620d28e7a1ba 125 }
Rohit Grover 118:620d28e7a1ba 126
Rohit Grover 118:620d28e7a1ba 127 return origLength;
Rohit Grover 118:620d28e7a1ba 128 }
Rohit Grover 118:620d28e7a1ba 129
Rohit Grover 118:620d28e7a1ba 130 /**
Rohit Grover 118:620d28e7a1ba 131 * Override for Stream::_putc()
Rohit Grover 118:620d28e7a1ba 132 * @param c
Rohit Grover 118:620d28e7a1ba 133 * This function writes the character c, cast to an unsigned char, to stream.
Rohit Grover 118:620d28e7a1ba 134 * @return
Rohit Grover 118:620d28e7a1ba 135 * The character written as an unsigned char cast to an int or EOF on error.
Rohit Grover 118:620d28e7a1ba 136 */
rgrover1 197:5551036f054b 137 int _putc(int c) {
Rohit Grover 118:620d28e7a1ba 138 return (write(&c, 1) == 1) ? 1 : EOF;
Rohit Grover 118:620d28e7a1ba 139 }
Rohit Grover 118:620d28e7a1ba 140
mbedAustin 233:4d570d99b8cb 141 /**
mbedAustin 233:4d570d99b8cb 142 * Override for Stream::_getc()
mbedAustin 233:4d570d99b8cb 143 * @return
mbedAustin 233:4d570d99b8cb 144 * The character read.
mbedAustin 233:4d570d99b8cb 145 */
rgrover1 197:5551036f054b 146 int _getc() {
Rohit Grover 118:620d28e7a1ba 147 if (receiveBufferIndex == numBytesReceived) {
Rohit Grover 118:620d28e7a1ba 148 return EOF;
Rohit Grover 118:620d28e7a1ba 149 }
Rohit Grover 118:620d28e7a1ba 150
Rohit Grover 118:620d28e7a1ba 151 return receiveBuffer[receiveBufferIndex++];
Rohit Grover 118:620d28e7a1ba 152 }
Rohit Grover 118:620d28e7a1ba 153
rgrover1 197:5551036f054b 154 private:
rgrover1 197:5551036f054b 155 /**
rgrover1 197:5551036f054b 156 * This callback allows the UART service to receive updates to the
rgrover1 197:5551036f054b 157 * txCharacteristic. The application should forward the call to this
rgrover1 197:5551036f054b 158 * function from the global onDataWritten() callback handler; or if that's
rgrover1 197:5551036f054b 159 * not used, this method can be used as a callback directly.
rgrover1 197:5551036f054b 160 */
rgrover1 197:5551036f054b 161 void onDataWritten(const GattCharacteristicWriteCBParams *params) {
rgrover1 197:5551036f054b 162 if (params->charHandle == getTXCharacteristicHandle()) {
rgrover1 197:5551036f054b 163 uint16_t bytesRead = params->len;
rgrover1 197:5551036f054b 164 if (bytesRead <= BLE_UART_SERVICE_MAX_DATA_LEN) {
rgrover1 197:5551036f054b 165 numBytesReceived = bytesRead;
rgrover1 197:5551036f054b 166 receiveBufferIndex = 0;
rgrover1 197:5551036f054b 167 memcpy(receiveBuffer, params->data, numBytesReceived);
rgrover1 197:5551036f054b 168 }
rgrover1 197:5551036f054b 169 }
Rohit Grover 118:620d28e7a1ba 170 }
Rohit Grover 118:620d28e7a1ba 171
Rohit Grover 118:620d28e7a1ba 172 private:
Rohit Grover 118:620d28e7a1ba 173 BLEDevice &ble;
Rohit Grover 118:620d28e7a1ba 174
Rohit Grover 118:620d28e7a1ba 175 uint8_t receiveBuffer[BLE_UART_SERVICE_MAX_DATA_LEN]; /**< The local buffer into which we receive
Rohit Grover 118:620d28e7a1ba 176 * inbound data before forwarding it to the
Rohit Grover 118:620d28e7a1ba 177 * application. */
Rohit Grover 118:620d28e7a1ba 178
Rohit Grover 118:620d28e7a1ba 179 uint8_t sendBuffer[BLE_UART_SERVICE_MAX_DATA_LEN]; /**< The local buffer into which outbound data is
Rohit Grover 118:620d28e7a1ba 180 * accumulated before being pushed to the
Rohit Grover 118:620d28e7a1ba 181 * rxCharacteristic. */
Rohit Grover 118:620d28e7a1ba 182 uint8_t sendBufferIndex;
Rohit Grover 118:620d28e7a1ba 183 uint8_t numBytesReceived;
Rohit Grover 118:620d28e7a1ba 184 uint8_t receiveBufferIndex;
Rohit Grover 118:620d28e7a1ba 185
Rohit Grover 118:620d28e7a1ba 186 GattCharacteristic txCharacteristic; /**< From the point of view of the external client, this is the characteristic
Rohit Grover 118:620d28e7a1ba 187 * they'd write into in order to communicate with this application. */
Rohit Grover 118:620d28e7a1ba 188 GattCharacteristic rxCharacteristic; /**< From the point of view of the external client, this is the characteristic
Rohit Grover 118:620d28e7a1ba 189 * they'd read from in order to receive the bytes transmitted by this
Rohit Grover 118:620d28e7a1ba 190 * application. */
Rohit Grover 118:620d28e7a1ba 191 };
Rohit Grover 118:620d28e7a1ba 192
rgrover1 242:0e9201b67e2f 193 #endif /* #ifndef __BLE_UART_SERVICE_H__*/