Stepan Smejkal
Toto je má konečná verze maturitního projektu
Dependencies: mbed mbed-rtos UTouch_vyrobek UniGraphic
Diff: display.cpp
- Revision:
- 4:c7ca936cdd1f
- Parent:
- 3:dadb214885c1
- Child:
- 5:7c757a7c97c5
diff -r dadb214885c1 -r c7ca936cdd1f display.cpp
--- a/display.cpp Thu Dec 09 22:15:04 2021 +0000
+++ b/display.cpp Sat Dec 11 19:12:09 2021 +0000
@@ -2,7 +2,6 @@
#include "UTouch.h"
#include "ILI9341.h"
-
UTouch touch(D4,D9,D3,D2,D5);//clk,chip_select,MOSI,miso,irq(pripojeno je ale nevim co to dela)
ILI9341 spi(SPI_8,320000000,PTD2,PTD3,PTD1,PTC12, PTC3, PTC2, "TFT",240,320);// mosi, miso, sclk, chip_select, reset, dc
@@ -15,23 +14,45 @@
*/
-void grafika(unsigned short int press = 0){
+void grafika(unsigned short int press = 0){
+ int pravy[] = {0,0,200,70,Blue};
+ int levy[] = {0,250,199,320,Blue};
+ int cudlik[] = {20,80,38,130,Red};
+ int spodni_levy[] = {200,240,240,320,Green};
+ int stredni_levy[] = {200,159,240,239,Red};
+ int stredni_pravy[] = {200,78,240,158,Purple};
+ int spodni_pravy[] = {200,0,240,77,Yellow};
+
switch(press)
{
case 1:
- spi.fillrect(0,0,180,70,Blue);// pravy
+ spi.fillrect(pravy[0],pravy[1],pravy[2],pravy[3],pravy[4]);// pravy
break;
- case 2 :
- spi.fillrect(0,320,180,250,Blue);// levy
+ case 2:
+ spi.fillrect(levy[0],levy[1],levy[2],levy[3],levy[4]);// levy
+ break;
+ case 3:
+ spi.fillrect(spodni_levy[0],spodni_levy[1],spodni_levy[2],spodni_levy[3],spodni_levy[4]);// levy kraj spodni
break;
-
- default :
-
- spi.fillrect(0,0,180,70,Blue); //pravy
- spi.fillrect(0,140,180,71,Black); //stred
- spi.fillrect(0,320,180,250,Blue); //levy
- spi.fillrect(20,80,38,130,Red); //letajici cudlik
- spi.pixel(30,105,Blue);
+ case 4:
+ spi.fillrect(stredni_levy[0],stredni_levy[1],stredni_levy[2],stredni_levy[3],stredni_levy[4]);// stred levy spodni
+ break;
+ case 5:
+ spi.fillrect(stredni_pravy[0],stredni_pravy[1],stredni_pravy[2],stredni_pravy[3],stredni_pravy[4]);//stred pravy spodni
+ break;
+ case 6:
+ spi.fillrect(spodni_pravy[0],spodni_pravy[1],spodni_pravy[2],spodni_pravy[3],spodni_pravy[4]); //pravy kraj spodni
+ break;
+
+
+ default:
+ spi.fillrect(pravy[0],pravy[1],pravy[2],pravy[3],pravy[4]); //pravy
+ spi.fillrect(0,140,180,71,Green); //stred
+ spi.fillrect(levy[0],levy[1],levy[2],levy[3],levy[4]); //levy
+ spi.fillrect(spodni_levy[0],spodni_levy[1],spodni_levy[2],spodni_levy[3],spodni_levy[4]); //levy kraj spodni
+ spi.fillrect(stredni_levy[0],stredni_levy[1],stredni_levy[2],stredni_levy[3],stredni_levy[4]); //stred levy spodni
+ spi.fillrect(stredni_pravy[0],stredni_pravy[1],stredni_pravy[2],stredni_pravy[3],stredni_pravy[4]); //stred pravy spodni
+ spi.fillrect(spodni_pravy[0],spodni_pravy[1],spodni_pravy[2],spodni_pravy[3],spodni_pravy[4]); //pravy kraj spodni
}
}
@@ -52,54 +73,23 @@
}
}
}
-/*
-void Slider(int cudlik[],int stred_cudliku[]){
- int pressure= touch.GetPressure();
- while(pressure > 0){
-
- printf("%d\r\n",pressure);
- unsigned short int touch_x = touch.GetY(); // 0-240
-
-
- unsigned short int x0 = cudlik[0];
- unsigned short int x1 = cudlik[2];
- unsigned short int y0 = cudlik[1];
- unsigned short int y1 = cudlik[3];
- if(touch_x > stred_cudliku[0]){
-
- stred_cudliku[0] = touch_x - (stred_cudliku[0] + (stred_cudliku[0] + 1));
- }else if(touch_x < stred_cudliku[0]){
-
- stred_cudliku[0] = touch_x + (stred_cudliku[0] - (stred_cudliku[0] - 1));
- }
-
-
- //stred_cudliku[0] = ((x0-x1)/2);
-
- cudlik[0] = (touch_x*2) - x1;
- cudlik[2] = (touch_x*2) - x0;
-
- //cudlik[1] = (touch_y*2) - y1;
- //cudlik[3] = (touch_y*2) - y0;
-
- spi.fillrect(x0,y0,x1,y1,Black);
- spi.fillrect(cudlik[0],cudlik[1],cudlik[2],cudlik[3],cudlik[4]);
- spi.pixel(stred_cudliku[0],stred_cudliku[1],stred_cudliku[2]);
- pressure = touch.GetPressure();
-
- }
-
- }
-*/
void Button(){
int R_is_pressed = 0; //pro pravy čudlik
int L_is_pressed = 0; //pro levy čudlik
+ int Ls_is_pressed = 0; //pro levy spodni čudlik
+ int Sl_is_pressed = 0; //pro levy stredni čudlik
+ int Sr_is_pressed = 0; //pro pravy stredni čudlik
+ int Rs_is_pressed = 0; //pro pravy spodni čudlik
- int pravy[] = {0,0,180,70,Black}; //pravý čudlík
- int levy[] = {0,320,180,250,Black}; //levý čudlík
- int cudlik[] = {20,80,42,130,Orange}; // čudlík
- int stred_cudliku[] = {30,105,Blue};
+ int pravy[] = {0,0,200,70,Black}; //pravý čudlík
+ int levy[] = {0,250,199,320,Black}; //levý čudlík
+ //int cudlik[] = {20,80,42,130,Orange}; //slider nepovedeny projekt
+ //int stred_cudliku[] = {30,105,Blue}; //střed čudliku
+ int spodni_levy[] = {200,240,240,320,Red}; // levy spodni cudlik
+ int stredni_levy[] = {200,159,240,239,Green}; //stred levy spodni cudlik
+ int stredni_pravy[] = {200,78,240,158,Yellow}; //stred pravy spodni cudlik
+ int spodni_pravy[] = {200,0,240,77,Purple}; // pravy spodni cudlik
while(1)
@@ -114,54 +104,87 @@
touch_y = touch_y + 10;
//spi.pixel(touch_x,touch_y,Blue);
int pressure = touch.GetPressure();
-
+ printf("x %d ,y %d\r\n",touch_x,touch_y);
//pravý čudlik
- if ((touch_x > pravy[0]) && (touch_x < pravy[2]) && (touch_y < pravy [3]) && (touch_y > pravy [1]) && (R_is_pressed == 1)){
+ if ((touch_x > pravy[0]) && (touch_x < pravy[2]) && (touch_y < pravy[3]) && (touch_y > pravy[1]) && (R_is_pressed == 1)){
grafika(R_is_pressed);
R_is_pressed = 0;
wait(0.3);
- }else if ((touch_x > pravy[0]) && (touch_x < pravy[2]) && (touch_y < pravy [3]) && (touch_y > pravy [1])){
+ }else if ((touch_x > pravy[0]) && (touch_x < pravy[2]) && (touch_y < pravy[3]) && (touch_y > pravy [1])){
R_is_pressed = 1;
spi.fillrect(pravy[0],pravy[1],pravy[2],pravy[3],pravy[4]);
wait(0.3);
}
//pravý čudlik
- //levý čudlik
- if ((touch_x > levy[0]) && (touch_x < levy[2]) && (touch_y < levy [1]) && (touch_y > levy [3]) && (L_is_pressed == 2)){
+ //levý čudlik
+ if ((touch_x > levy[0]) && (touch_x < levy[2]) && (touch_y < levy[3]) && (touch_y > levy[1]) && (L_is_pressed == 2)){
grafika(L_is_pressed);
L_is_pressed = 0;
wait(0.3);
- }else if ((touch_x > levy[0]) && (touch_x < levy[2]) && (touch_y < levy [1]) && (touch_y > levy [3])){
+ }else if ((touch_x > levy[0]) && (touch_x < levy[2]) && (touch_y < levy[3]) && (touch_y > levy[1])){
L_is_pressed = 2;
spi.fillrect(levy[0],levy[1],levy[2],levy[3],levy[4]);
wait(0.3);
}
//levý čudlik
+
+ //levý spodni čudlik
+ if ((touch_x > spodni_levy[0]) && (touch_x < spodni_levy[2]) && (touch_y < spodni_levy[3]) && (touch_y > spodni_levy[1]) && (Ls_is_pressed == 3)){
+ grafika(Ls_is_pressed);
+ Ls_is_pressed = 0;
+ wait(0.3);
+ }else if ((touch_x > spodni_levy[0]) && (touch_x < spodni_levy[2]) && (touch_y < spodni_levy[3]) && (touch_y > spodni_levy[1])){
+ Ls_is_pressed = 3;
+ spi.fillrect(spodni_levy[0],spodni_levy[1],spodni_levy[2],spodni_levy[3],spodni_levy[4]);
+ wait(0.3);
+ }
+ //levý spodni čudlik
- //cudlik
- if ((touch_x > cudlik[0]) && (touch_x < cudlik[2]) && (touch_y > cudlik [1]) && (touch_y < cudlik [3]) && (pressure > 0)){
-
- unsigned short int x0 = cudlik[0];
- unsigned short int x1 = cudlik[2];
- unsigned short int y0 = cudlik[1];
- unsigned short int y1 = cudlik[3];
-
- stred_cudliku[0] = touch_x;
-
- cudlik[0] = stred_cudliku[0] - 10;
- cudlik[1] = stred_cudliku[1] - 25;
- cudlik[2] = stred_cudliku[0] + 10;
- cudlik[3] = stred_cudliku[1] + 25;
-
- spi.pixel(stred_cudliku[0],stred_cudliku[1],stred_cudliku[2]);
- spi.fillrect(x0,y0,x1,y1,Black);
- spi.fillrect(cudlik[0],cudlik[1],cudlik[2],cudlik[3],cudlik[4]);
- printf("%d new \r\n",cudlik[1]);
+
+ //stred levy spodni cudlik
+ if ((touch_x > stredni_levy[0]) && (touch_x < stredni_levy[2]) && (touch_y < stredni_levy[3]) && (touch_y > stredni_levy[1]) && (Sl_is_pressed == 4)){
+ grafika(Sl_is_pressed);
+ Sl_is_pressed = 0;
+ wait(0.3);
+ }else if ((touch_x > stredni_levy[0]) && (touch_x < stredni_levy[2]) && (touch_y < stredni_levy[3]) && (touch_y > stredni_levy[1])){
+ Sl_is_pressed = 4;
+ spi.fillrect(stredni_levy[0],stredni_levy[1],stredni_levy[2],stredni_levy[3],stredni_levy[4]);
+ wait(0.3);
}
+ //stred levy spodni cudlik
+
+
+ //stred pravy spodni cudlik
+ if ((touch_x > stredni_pravy[0]) && (touch_x < stredni_pravy[2]) && (touch_y < stredni_pravy[3]) && (touch_y > stredni_pravy[1]) && (Sr_is_pressed == 5)){
+ grafika(Sr_is_pressed);
+ Sr_is_pressed = 0;
+ wait(0.3);
+ }else if ((touch_x > stredni_pravy[0]) && (touch_x < stredni_pravy[2]) && (touch_y < stredni_pravy[3]) && (touch_y > stredni_pravy[1])){
+ Sr_is_pressed = 5;
+ spi.fillrect(stredni_pravy[0],stredni_pravy[1],stredni_pravy[2],stredni_pravy[3],stredni_pravy[4]);
+ wait(0.3);
+ }
+ //stred pravy spodni cudlik
+
+ //kraj pravy spodni cudlik
+ if ((touch_x > spodni_pravy[0]) && (touch_x < spodni_pravy[2]) && (touch_y < spodni_pravy[3]) && (touch_y > spodni_pravy[1]) && (Rs_is_pressed == 6)){
+ grafika(Rs_is_pressed);
+ Rs_is_pressed = 0;
+ wait(0.3);
+ }else if ((touch_x > spodni_pravy[0]) && (touch_x < spodni_pravy[2]) && (touch_y < spodni_pravy[3]) && (touch_y > spodni_pravy[1])){
+ Rs_is_pressed = 6;
+ spi.fillrect(spodni_pravy[0],spodni_pravy[1],spodni_pravy[2],spodni_pravy[3],spodni_pravy[4]);
+ wait(0.3);
+ }
+ //kraj pravy spodni cudlik
+
+
- //cudlik
+
+
+
}
}
@@ -177,10 +200,75 @@
touch.SetPrecision(PREC_EXTREME);
spi.background(White);
spi.cls();
- spi.circle(240,320,20,Black);
+ //spi.circle(240,320,20,Black);
grafika();
Button();
}
+
+
+
+
+/* fail projekty
+
+
+
+
+
+
+
+
+
+
+
+
+
+ //slider
+ if ((touch_x > cudlik[0]) && (touch_x < cudlik[2]) && (touch_y > cudlik[1]) && (touch_y < cudlik[3]) && (pressure > 0)){
+
+
+ //if je udelany tady pro nastavení minima a maxima
+ if ((touch_x > 25) && (touch_x < 140)){
+
+ unsigned short int y0 = cudlik[1];
+ unsigned short int y1 = cudlik[3];
+ unsigned short int x_zadelavani_chyby = cudlik[0];
+ unsigned short int x0 = x_zadelavani_chyby - 8;
+
+ //printf("%d\r\n",touch_x);
+ stred_cudliku[0] = touch_x;
+
+ cudlik[0] = stred_cudliku[0] - 10;
+ cudlik[1] = stred_cudliku[1] - 25;
+ cudlik[2] = stred_cudliku[0] + 10;
+ cudlik[3] = stred_cudliku[1] + 25;
+
+
+
+ if (touch_x > 34){
+ x0 = x_zadelavani_chyby + 8;
+ spi.fillrect(x0,y0,x_zadelavani_chyby,y1,Green);
+
+ }else{
+spi.fillrect(x0,y0,x_zadelavani_chyby,y1,Black);
+ }
+
+ if (touch_x < 34){
+ spi.fillrect(x0,y0,x_zadelavani_chyby,y1,Black);
+
+ }else{
+ x0 = x_zadelavani_chyby + 8;
+ spi.fillrect(x0,y0,x_zadelavani_chyby,y1,Green);
+ }
+ spi.fillrect(cudlik[0],cudlik[1],cudlik[2],cudlik[3],cudlik[4]);
+
+
+
+ }
+ }
+
+ //slider */
+
+