Freeman Oldman / NUCLEO_STM32F401RE_CC3000_ILI9341

The code from https://github.com/vpcola/Nucleo

mbed-src/common/board.c@0:5464d5e415e5, 2014-10-08 (annotated)

Committer:
sinrab
Date:
Wed Oct 08 11:00:24 2014 +0000
Revision:
0:5464d5e415e5
The code from https://github.com/vpcola/Nucleo

Who changed what in which revision?

UserRevisionLine numberNew contents of line
sinrab 0:5464d5e415e5 1 /* mbed Microcontroller Library
sinrab 0:5464d5e415e5 2 * Copyright (c) 2006-2013 ARM Limited
sinrab 0:5464d5e415e5 3 *
sinrab 0:5464d5e415e5 4 * Licensed under the Apache License, Version 2.0 (the "License");
sinrab 0:5464d5e415e5 5 * you may not use this file except in compliance with the License.
sinrab 0:5464d5e415e5 6 * You may obtain a copy of the License at
sinrab 0:5464d5e415e5 7 *
sinrab 0:5464d5e415e5 8 * http://www.apache.org/licenses/LICENSE-2.0
sinrab 0:5464d5e415e5 9 *
sinrab 0:5464d5e415e5 10 * Unless required by applicable law or agreed to in writing, software
sinrab 0:5464d5e415e5 11 * distributed under the License is distributed on an "AS IS" BASIS,
sinrab 0:5464d5e415e5 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
sinrab 0:5464d5e415e5 13 * See the License for the specific language governing permissions and
sinrab 0:5464d5e415e5 14 * limitations under the License.
sinrab 0:5464d5e415e5 15 */
sinrab 0:5464d5e415e5 16 #include "gpio_api.h"
sinrab 0:5464d5e415e5 17 #include "wait_api.h"
sinrab 0:5464d5e415e5 18 #include "toolchain.h"
sinrab 0:5464d5e415e5 19 #include "mbed_interface.h"
sinrab 0:5464d5e415e5 20
sinrab 0:5464d5e415e5 21 WEAK void mbed_die(void) {
sinrab 0:5464d5e415e5 22 #ifndef NRF51_H
sinrab 0:5464d5e415e5 23 __disable_irq(); // dont allow interrupts to disturb the flash pattern
sinrab 0:5464d5e415e5 24 #endif
sinrab 0:5464d5e415e5 25 #if (DEVICE_ERROR_RED == 1)
sinrab 0:5464d5e415e5 26 gpio_t led_red; gpio_init_out(&led_red, LED_RED);
sinrab 0:5464d5e415e5 27 #elif (DEVICE_ERROR_PATTERN == 1)
sinrab 0:5464d5e415e5 28 gpio_t led_1; gpio_init_out(&led_1, LED1);
sinrab 0:5464d5e415e5 29 gpio_t led_2; gpio_init_out(&led_2, LED2);
sinrab 0:5464d5e415e5 30 gpio_t led_3; gpio_init_out(&led_3, LED3);
sinrab 0:5464d5e415e5 31 gpio_t led_4; gpio_init_out(&led_4, LED4);
sinrab 0:5464d5e415e5 32 #endif
sinrab 0:5464d5e415e5 33
sinrab 0:5464d5e415e5 34 while (1) {
sinrab 0:5464d5e415e5 35 #if (DEVICE_ERROR_RED == 1)
sinrab 0:5464d5e415e5 36 gpio_write(&led_red, 1);
sinrab 0:5464d5e415e5 37
sinrab 0:5464d5e415e5 38 #elif (DEVICE_ERROR_PATTERN == 1)
sinrab 0:5464d5e415e5 39 gpio_write(&led_1, 1);
sinrab 0:5464d5e415e5 40 gpio_write(&led_2, 0);
sinrab 0:5464d5e415e5 41 gpio_write(&led_3, 0);
sinrab 0:5464d5e415e5 42 gpio_write(&led_4, 1);
sinrab 0:5464d5e415e5 43 #endif
sinrab 0:5464d5e415e5 44
sinrab 0:5464d5e415e5 45 wait_ms(150);
sinrab 0:5464d5e415e5 46
sinrab 0:5464d5e415e5 47 #if (DEVICE_ERROR_RED == 1)
sinrab 0:5464d5e415e5 48 gpio_write(&led_red, 0);
sinrab 0:5464d5e415e5 49
sinrab 0:5464d5e415e5 50 #elif (DEVICE_ERROR_PATTERN == 1)
sinrab 0:5464d5e415e5 51 gpio_write(&led_1, 0);
sinrab 0:5464d5e415e5 52 gpio_write(&led_2, 1);
sinrab 0:5464d5e415e5 53 gpio_write(&led_3, 1);
sinrab 0:5464d5e415e5 54 gpio_write(&led_4, 0);
sinrab 0:5464d5e415e5 55 #endif
sinrab 0:5464d5e415e5 56
sinrab 0:5464d5e415e5 57 wait_ms(150);
sinrab 0:5464d5e415e5 58 }
sinrab 0:5464d5e415e5 59 }
sinrab 0:5464d5e415e5 60