Diff: main.cpp

Revision:

0:00dc6f54b3dc

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Sun Jun 06 19:36:07 2010 +0000
@@ -0,0 +1,33 @@
+// example to test out OLED on mbed + XPresso baseboard, sford
+
+#include "mbed.h"
+#include "EAOLED.h"
+
+// NOTE: The xpresso board does not provide the data/command signal to the mbed, so I added a wire:
+// Connect:
+//  PIO2_7 of baseboard mbed socket (empty 2nd hole below mbed pin 21)
+// to
+//   PIO0_8(p13) of J6 (7th hole down on left side of J6)
+// to provide OLED data/command signal
+
+EAOLED oled(p5, p6, p7, p8, p25); // mosi, dnc, sclk, cs, power
+
+int main() {
+    oled.cls();
+    oled.printf("Hello World!");
+    wait(1);
+    oled.locate(0,5);
+    oled.printf("I'm an OLED!");
+    wait(1);
+    for (int y=30; y<64; y++) {
+        for (int x=5; x<90; x++) {
+            oled.pixel(x - 4, y, 0x000000);
+            oled.pixel(x + 4, y, 0xFFFFFF);
+            wait(0.002);
+        }
+    }
+    oled.locate(1,5);
+    oled.printf("Bye from");
+    oled.locate(1,6);
+    oled.printf("mbed.org");
+}