Diff: main.cpp

Revision:

0:2ce0698a332d

Child:

1:5c9bde92518d

diff -r 000000000000 -r 2ce0698a332d main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Mon Mar 14 21:26:39 2016 +0000
@@ -0,0 +1,69 @@
+#include "mbed.h"
+
+Serial pc(PA_2, PA_3);               // This is USB tx, rx
+Serial sensor_uart(PA_9, PA_10);        // This is USART2 tx, rx
+
+DigitalOut myled(PB_5);             // This is USER LED
+DigitalOut myled2(PA_7);             // This is USER LED
+DigitalIn BlueButton(PB_9);   // This is Blue-Button
+
+#define Pressed 0
+#define NotPressed 1
+
+int USBByte='\0';
+int GaugeByte='\0';
+int n=0;
+int readgauge = 0;
+Timer t;
+char str[5];
+long millis = 0;
+
+void PC_INT()  // USART2 used for Debug
+{
+    // Note: you need to actually read from the serial to clear the RX interrupt
+    pc.putc(pc.getc());
+    myled = (myled)?(0):(1);
+}
+
+void SENSOR_USART_INT()  // SENSOR_USART
+{
+    // Note: you need to actually read from the serial to clear the RX interrupt
+    //myled = 1;
+    //Serial3.scanf(str);
+    //sensor_uart.scanf("%5s", str);
+    //str = strcat ("   PISKA   ", str);
+    //sprintf(millis, "%d", t.read_ms());
+    //int k = 0;
+    //for (k = 0; k < 10; k++){;}
+    //str = strcat (millis, str);
+    //pc.printf(str);
+    //pc.printf(millis);
+    if (sensor_uart.getc() == 'R') {
+        myled = (myled)?(0):(1);
+        pc.printf("timestamp: %d; gauge value: %s\r\n", t.read_ms(), sensor_uart.gets(str, 5));
+    }
+}
+
+int main()
+{
+    myled = 0;
+
+    // SetUp the baud rate
+    pc.baud(9600);
+    sensor_uart.baud(9600);
+
+    sensor_uart.attach(&SENSOR_USART_INT);
+    pc.attach(&PC_INT);
+
+    t.start();
+
+    pc.printf("\n\r\n\r|||||START MAIN|||||\n\r");
+
+    while(1) {
+        // Test the Blue Button
+        while(BlueButton == Pressed) {
+            myled2 = BlueButton;
+            pc.printf("Please release the BLUE Button\n\r");
+        }
+    }
+}
\ No newline at end of file