mavlink_msg_set_mode.h

00001 // MESSAGE SET_MODE PACKING
00002 
00003 #define MAVLINK_MSG_ID_SET_MODE 11
00004 
00005 typedef struct __mavlink_set_mode_t 
00006 {
00007     uint8_t target; ///< The system setting the mode
00008     uint8_t mode; ///< The new mode
00009 
00010 } mavlink_set_mode_t;
00011 
00012 
00013 
00014 /**
00015  * @brief Pack a set_mode message
00016  * @param system_id ID of this system
00017  * @param component_id ID of this component (e.g. 200 for IMU)
00018  * @param msg The MAVLink message to compress the data into
00019  *
00020  * @param target The system setting the mode
00021  * @param mode The new mode
00022  * @return length of the message in bytes (excluding serial stream start sign)
00023  */
00024 static inline uint16_t mavlink_msg_set_mode_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, uint8_t target, uint8_t mode)
00025 {
00026     uint16_t i = 0;
00027     msg->msgid = MAVLINK_MSG_ID_SET_MODE;
00028 
00029     i += put_uint8_t_by_index(target, i, msg->payload); // The system setting the mode
00030     i += put_uint8_t_by_index(mode, i, msg->payload); // The new mode
00031 
00032     return mavlink_finalize_message(msg, system_id, component_id, i);
00033 }
00034 
00035 /**
00036  * @brief Pack a set_mode message
00037  * @param system_id ID of this system
00038  * @param component_id ID of this component (e.g. 200 for IMU)
00039  * @param chan The MAVLink channel this message was sent over
00040  * @param msg The MAVLink message to compress the data into
00041  * @param target The system setting the mode
00042  * @param mode The new mode
00043  * @return length of the message in bytes (excluding serial stream start sign)
00044  */
00045 static inline uint16_t mavlink_msg_set_mode_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, uint8_t target, uint8_t mode)
00046 {
00047     uint16_t i = 0;
00048     msg->msgid = MAVLINK_MSG_ID_SET_MODE;
00049 
00050     i += put_uint8_t_by_index(target, i, msg->payload); // The system setting the mode
00051     i += put_uint8_t_by_index(mode, i, msg->payload); // The new mode
00052 
00053     return mavlink_finalize_message_chan(msg, system_id, component_id, chan, i);
00054 }
00055 
00056 /**
00057  * @brief Encode a set_mode struct into a message
00058  *
00059  * @param system_id ID of this system
00060  * @param component_id ID of this component (e.g. 200 for IMU)
00061  * @param msg The MAVLink message to compress the data into
00062  * @param set_mode C-struct to read the message contents from
00063  */
00064 static inline uint16_t mavlink_msg_set_mode_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_set_mode_t* set_mode)
00065 {
00066     return mavlink_msg_set_mode_pack(system_id, component_id, msg, set_mode->target, set_mode->mode);
00067 }
00068 
00069 /**
00070  * @brief Send a set_mode message
00071  * @param chan MAVLink channel to send the message
00072  *
00073  * @param target The system setting the mode
00074  * @param mode The new mode
00075  */
00076 #ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS
00077 
00078 static inline void mavlink_msg_set_mode_send(mavlink_channel_t chan, uint8_t target, uint8_t mode)
00079 {
00080     mavlink_message_t msg;
00081     mavlink_msg_set_mode_pack_chan(mavlink_system.sysid, mavlink_system.compid, chan, &msg, target, mode);
00082     mavlink_send_uart(chan, &msg);
00083 }
00084 
00085 #endif
00086 // MESSAGE SET_MODE UNPACKING
00087 
00088 /**
00089  * @brief Get field target from set_mode message
00090  *
00091  * @return The system setting the mode
00092  */
00093 static inline uint8_t mavlink_msg_set_mode_get_target(const mavlink_message_t* msg)
00094 {
00095     return (uint8_t)(msg->payload)[0];
00096 }
00097 
00098 /**
00099  * @brief Get field mode from set_mode message
00100  *
00101  * @return The new mode
00102  */
00103 static inline uint8_t mavlink_msg_set_mode_get_mode(const mavlink_message_t* msg)
00104 {
00105     return (uint8_t)(msg->payload+sizeof(uint8_t))[0];
00106 }
00107 
00108 /**
00109  * @brief Decode a set_mode message into a struct
00110  *
00111  * @param msg The message to decode
00112  * @param set_mode C-struct to decode the message contents into
00113  */
00114 static inline void mavlink_msg_set_mode_decode(const mavlink_message_t* msg, mavlink_set_mode_t* set_mode)
00115 {
00116     set_mode->target = mavlink_msg_set_mode_get_target(msg);
00117     set_mode->mode = mavlink_msg_set_mode_get_mode(msg);
00118 }