mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/hal/TARGET_NXP/TARGET_LPC11UXX/pwmout_api.c
- Revision:
- 274:6937b19af361
- Parent:
- 227:7bd0639b8911
diff -r 92da1fd309d2 -r 6937b19af361 targets/hal/TARGET_NXP/TARGET_LPC11UXX/pwmout_api.c --- a/targets/hal/TARGET_NXP/TARGET_LPC11UXX/pwmout_api.c Wed Aug 06 07:45:07 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/pwmout_api.c Wed Aug 06 08:15:07 2014 +0100 @@ -17,38 +17,11 @@ #include "pwmout_api.h" #include "cmsis.h" #include "pinmap.h" +#include "PeripheralPins.h" // For the Peripheral to Pin Definitions found in the individual Target's Platform #define TCR_CNT_EN 0x00000001 #define TCR_RESET 0x00000002 -/* To have a PWM where we can change both the period and the duty cycle, - * we need an entire timer. With the following conventions: - * * MR3 is used for the PWM period - * * MR0, MR1, MR2 are used for the duty cycle - */ -static const PinMap PinMap_PWM[] = { - /* CT16B0 */ - {P0_8 , PWM_1, 2}, {P1_13, PWM_1, 2}, /* MR0 */ - {P0_9 , PWM_2, 2}, {P1_14, PWM_2, 2}, /* MR1 */ - {P0_10, PWM_3, 3}, {P1_15, PWM_3, 2}, /* MR2 */ - - /* CT16B1 */ - {P0_21, PWM_4, 1}, /* MR0 */ - {P0_22, PWM_5, 2}, {P1_23, PWM_5, 1}, /* MR1 */ - - /* CT32B0 */ - {P0_18, PWM_6, 2}, {P1_24, PWM_6, 1}, /* MR0 */ - {P0_19, PWM_7, 2}, {P1_25, PWM_7, 1}, /* MR1 */ - {P0_1 , PWM_8, 2}, {P1_26, PWM_8, 1}, /* MR2 */ - - /* CT32B1 */ - {P0_13, PWM_9 , 3}, {P1_0, PWM_9 , 1}, /* MR0 */ - {P0_14, PWM_10, 3}, {P1_1, PWM_10, 1}, /* MR1 */ - {P0_15, PWM_11, 3}, {P1_2, PWM_11, 1}, /* MR2 */ - - {NC, NC, 0} -}; - typedef struct { uint8_t timer; uint8_t mr;