Revision 274:6937b19af361, committed 2014-08-06

Comitter:

mbed_official

Date:

Wed Aug 06 08:15:07 2014 +0100

Parent:

273:92da1fd309d2

Child:

275:8287c40fc7ee

Commit message:

Synchronized with git revision 5b145e4f6c509376173c3ea2aa35a6da879a2124

Full URL: https://github.com/mbedmicro/mbed/commit/5b145e4f6c509376173c3ea2aa35a6da879a2124/

[TARGET_LPC11UXX] PeripheralNames.h and PinMap definitions separation for LPC11UXX platforms

Changed in this revision

--- a/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_ARM_MICRO/TARGET_GHI_MBUINO/LPC11U24.sct	Wed Aug 06 07:45:07 2014 +0100
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_ARM_MICRO/TARGET_GHI_MBUINO/LPC11U24.sct	Wed Aug 06 08:15:07 2014 +0100
@@ -6,8 +6,8 @@
    .ANY (+RO)
   }
   ; 8_byte_aligned(48 vect * 4 bytes) =  8_byte_aligned(0xC0) = 0xC0
-  ; 8KB - 0xC0 = 0x1F40
-  RW_IRAM1 0x100000C0 0x1F40  {
+  ; 6KB - 0xC0 = 0x1740
+  RW_IRAM1 0x100000C0 0x1740  {
    .ANY (+RW +ZI)
   }
   RW_IRAM2 0x20004000 0x800   { ; RW data, USB RAM

--- a/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_ARM_STD/TARGET_GHI_MBUINO/LPC11U24.sct	Wed Aug 06 07:45:07 2014 +0100
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_ARM_STD/TARGET_GHI_MBUINO/LPC11U24.sct	Wed Aug 06 08:15:07 2014 +0100
@@ -6,8 +6,8 @@
    .ANY (+RO)
   }
   ; 8_byte_aligned(48 vect * 4 bytes) =  8_byte_aligned(0xC0) = 0xC0
-  ; 8KB - 0xC0 = 0x1F40
-  RW_IRAM1 0x100000C0 0x1F40  {
+  ; 6KB - 0xC0 = 0x1740
+  RW_IRAM1 0x100000C0 0x1740  {
    .ANY (+RW +ZI)
   }
   RW_IRAM2 0x20004000 0x800   { ; RW data, USB RAM

--- a/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_GCC_ARM/TARGET_GHI_MBUINO/LPC11U24.ld	Wed Aug 06 07:45:07 2014 +0100
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_GCC_ARM/TARGET_GHI_MBUINO/LPC11U24.ld	Wed Aug 06 08:15:07 2014 +0100
@@ -4,7 +4,7 @@
 MEMORY
 {
   FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 32K
-  RAM (rwx) : ORIGIN = 0x100000C0, LENGTH = 0x1F40
+  RAM (rwx) : ORIGIN = 0x100000C0, LENGTH = 0x1740
   USB_RAM (rwx): ORIGIN = 0x20004000, LENGTH = 0x800
 }
 

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/PeripheralPins.h	Wed Aug 06 08:15:07 2014 +0100
@@ -0,0 +1,43 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ 
+#ifndef MBED_PERIPHERALPINS_H
+#define MBED_PERIPHERALPINS_H
+
+#include "pinmap.h"
+#include "PeripheralNames.h"
+
+/************ADC***************/
+extern const PinMap PinMap_ADC[];
+
+/************I2C***************/
+extern const PinMap PinMap_I2C_SDA[];
+extern const PinMap PinMap_I2C_SCL[];
+
+/************UART***************/
+extern const PinMap PinMap_UART_TX[];
+extern const PinMap PinMap_UART_RX[];
+
+/************SPI***************/
+extern const PinMap PinMap_SPI_SCLK[];
+extern const PinMap PinMap_SPI_MOSI[];
+extern const PinMap PinMap_SPI_MISO[];
+extern const PinMap PinMap_SPI_SSEL[];
+
+/************PWM***************/
+extern const PinMap PinMap_PWM[];
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_ARCH_GPRS/PeripheralPins.c	Wed Aug 06 08:15:07 2014 +0100
@@ -0,0 +1,117 @@
+
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ 
+#include "PeripheralPins.h"
+
+/************ADC***************/
+const PinMap PinMap_ADC[] = {
+    {P0_11, ADC0_0, 0x02},
+    {P0_12, ADC0_1, 0x02},
+    {P0_13, ADC0_2, 0x02},
+    {P0_14, ADC0_3, 0x02},
+    {P0_15, ADC0_4, 0x02},
+    {P0_16, ADC0_5, 0x01},
+    {P0_22, ADC0_6, 0x01},
+    {P0_23, ADC0_7, 0x01},
+    {NC   , NC    , 0   }
+};
+
+/************I2C***************/
+const PinMap PinMap_I2C_SDA[] = {
+    {P0_5, I2C_0, 1},
+    {NC  , NC   , 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+    {P0_4, I2C_0, 1},
+    {NC  , NC,    0}
+};
+
+/************UART***************/
+const PinMap PinMap_UART_TX[] = {
+    {P0_19, UART_0, 1},
+    {P1_13, UART_0, 3},
+    {P1_27, UART_0, 2},
+    { NC  , NC    , 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+    {P0_18, UART_0, 1},
+    {P1_14, UART_0, 3},
+    {P1_26, UART_0, 2},
+    {NC   , NC    , 0}
+};
+
+/************SPI***************/
+const PinMap PinMap_SPI_SCLK[] = {
+    {P0_6 , SPI_0, 0x02},
+    {P0_10, SPI_0, 0x02},
+    {P1_29, SPI_0, 0x01},
+    {P1_15, SPI_1, 0x03},
+    {P1_20, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_MOSI[] = {
+    {P0_9 , SPI_0, 0x01},
+    {P0_21, SPI_1, 0x02},
+    {P1_22, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+    {P0_8 , SPI_0, 0x01},
+    {P0_22, SPI_1, 0x03},
+    {P1_21, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+    {P0_2 , SPI_0, 0x01},
+    {P1_19, SPI_1, 0x02},
+    {P1_23, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+/************PWM***************/
+/* To have a PWM where we can change both the period and the duty cycle,
+ * we need an entire timer. With the following conventions:
+ *   * MR3 is used for the PWM period
+ *   * MR0, MR1, MR2 are used for the duty cycle
+ */
+const PinMap PinMap_PWM[] = {
+    /* CT16B0 */
+    {P0_8 , PWM_1, 2}, {P1_13, PWM_1, 2},    /* MR0 */
+    {P0_9 , PWM_2, 2}, {P1_14, PWM_2, 2},   /* MR1 */
+    {P0_10, PWM_3, 3}, {P1_15, PWM_3, 2},   /* MR2 */
+
+    /* CT16B1 */
+    {P0_21, PWM_4, 1},                      /* MR0 */
+    {P0_22, PWM_5, 2}, {P1_23, PWM_5, 1},   /* MR1 */
+
+    /* CT32B0 */
+    {P0_18, PWM_6, 2}, {P1_24, PWM_6, 1},   /* MR0 */
+    {P0_19, PWM_7, 2}, {P1_25, PWM_7, 1},   /* MR1 */
+    {P0_1 , PWM_8, 2}, {P1_26, PWM_8, 1},   /* MR2 */
+
+    /* CT32B1 */
+    {P0_13, PWM_9 , 3}, {P1_0, PWM_9 , 1},  /* MR0 */
+    {P0_14, PWM_10, 3}, {P1_1, PWM_10, 1},  /* MR1 */
+    {P0_15, PWM_11, 3}, {P1_2, PWM_11, 1},  /* MR2 */
+
+    {NC, NC, 0}
+};

--- a/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_GHI_MBUINO/PeripheralNames.h	Wed Aug 06 07:45:07 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_GHI_MBUINO/PeripheralNames.h	Wed Aug 06 08:15:07 2014 +0100
@@ -57,7 +57,9 @@
     PWM_8,
     PWM_9,
     PWM_10,
-    PWM_11
+    PWM_11,
+    PWM_12,
+    PWM_13
 } PWMName;
 
 #define STDIO_UART_TX     USBTX
@@ -65,20 +67,22 @@
 #define STDIO_UART        UART_0
 
 // Default peripherals
-#define MBED_SPI0         p5, p6, p7, p8
-#define MBED_SPI1         p11, p12, p13, p14
+#define MBED_SPI0         P0_9, P0_8, P0_6, P0_2        // MOSI, MISO, CLK, SEL
+#define MBED_SPI1         P0_21, P0_22, P1_15, P01_19   // MOSI, MISO, CLK, SEL
 
-#define MBED_UART0        p9, p10
+#define MBED_UART0        USBTX, USBRX
 #define MBED_UARTUSB      USBTX, USBRX
 
-#define MBED_I2C0         p28, p27
+#define MBED_I2C0         P0_5, P0_4
 
-#define MBED_ANALOGIN0    p15
-#define MBED_ANALOGIN1    p16
-#define MBED_ANALOGIN2    p17
-#define MBED_ANALOGIN3    p18
-#define MBED_ANALOGIN4    p19
-#define MBED_ANALOGIN5    p20
+#define MBED_ANALOGIN0    P0_11
+#define MBED_ANALOGIN1    P0_12
+#define MBED_ANALOGIN2    P0_13
+#define MBED_ANALOGIN3    P0_14
+#define MBED_ANALOGIN4    P0_15
+#define MBED_ANALOGIN5    P0_16
+#define MBED_ANALOGIN6    P0_22
+#define MBED_ANALOGIN7    P0_23
 
 #ifdef __cplusplus
 }

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_GHI_MBUINO/PeripheralPins.c	Wed Aug 06 08:15:07 2014 +0100
@@ -0,0 +1,104 @@
+
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ 
+#include "PeripheralPins.h"
+
+/************ADC***************/
+const PinMap PinMap_ADC[] = {
+    {P0_11, ADC0_0, 0x02},
+    {P0_12, ADC0_1, 0x02},
+    {P0_13, ADC0_2, 0x02},
+    {P0_14, ADC0_3, 0x02},
+    {P0_15, ADC0_4, 0x02},
+    {P0_16, ADC0_5, 0x01},
+    {P0_22, ADC0_6, 0x01},
+    {P0_23, ADC0_7, 0x01},
+    {NC   , NC    , 0   }
+};
+
+/************UART***************/
+const PinMap PinMap_UART_TX[] = {
+    {P0_19, UART_0, 1},
+//    {P1_13, UART_0, 3},
+//    {P1_27, UART_0, 2},
+    { NC  , NC    , 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+    {P0_18, UART_0, 1},
+//    {P1_14, UART_0, 3},
+//    {P1_26, UART_0, 2},
+    {NC   , NC    , 0}
+};
+
+/************SPI***************/
+const PinMap PinMap_SPI_SCLK[] = {
+    {P0_6 , SPI_0, 0x02},
+    {P0_10, SPI_0, 0x02},
+//    {P1_29, SPI_0, 0x01},
+    {P1_15, SPI_1, 0x03},
+//    {P1_20, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_MOSI[] = {
+    {P0_9 , SPI_0, 0x01},
+    {P0_21, SPI_1, 0x02},
+//    {P1_22, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+    {P0_8 , SPI_0, 0x01},
+    {P0_22, SPI_1, 0x03},
+//    {P1_21, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+    {P0_2 , SPI_0, 0x01},
+    {P1_19, SPI_1, 0x02},
+//    {P1_23, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+/************PWM***************/
+const PinMap PinMap_PWM[] = {
+    /* CT16B0 */
+    {P0_8 , PWM_1, 2},                      /* MR0 */
+    {P0_9 , PWM_2, 2},                      /* MR1 */
+    {P0_10, PWM_3, 3},                      /* MR2 */
+    {P1_15, PWM_3, 2},                      /* MR2 */ // Same channel as P0_10
+
+    /* CT16B1 */
+    {P0_21, PWM_4, 1},                      /* MR0 */
+    {P0_22, PWM_5, 2},                      /* MR1 */
+
+    /* CT32B0 */
+    {P0_18, PWM_6, 2},                      /* MR0 */
+    {P0_19, PWM_7, 2},                      /* MR1 */
+    {P0_1 , PWM_8, 2},                      /* MR2 */
+	{P0_11, PWM_9, 3},                      /* MR3 */
+
+    /* CT32B1 */
+    {P0_13, PWM_10, 3},                     /* MR0 */
+    {P0_14, PWM_11, 3},                     /* MR1 */
+    {P0_15, PWM_12, 3},                     /* MR2 */
+	{P0_16, PWM_13, 2},                     /* MR3 */
+
+    {NC, NC, 0}
+};

--- a/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_GHI_MBUINO/PinNames.h	Wed Aug 06 07:45:07 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_GHI_MBUINO/PinNames.h	Wed Aug 06 08:15:07 2014 +0100
@@ -30,7 +30,7 @@
 #define PORT_SHIFT  5
 
 typedef enum {
-    // LPC11U Pin Names
+    // LPC11U24 HVQFN33 Pin Names
     P0_0 = 0,
     P0_1 = 1,
     P0_2 = 2,
@@ -55,114 +55,24 @@
     P0_21 = 21,
     P0_22 = 22,
     P0_23 = 23,
-    P0_24 = 24,
-    P0_25 = 25,
-    P0_26 = 26,
-    P0_27 = 27,
 
-    P1_0 = 32,
-    P1_1 = 33,
-    P1_2 = 34,
-    P1_3 = 35,
-    P1_4 = 36,
-    P1_5 = 37,
-    P1_6 = 38,
-    P1_7 = 39,
-    P1_8 = 40,
-    P1_9 = 41,
-    P1_10 = 42,
-    P1_11 = 43,
-    P1_12 = 44,
-    P1_13 = 45,
-    P1_14 = 46,
     P1_15 = 47,
-    P1_16 = 48,
-    P1_17 = 49,
-    P1_18 = 50,
     P1_19 = 51,
-    P1_20 = 52,
-    P1_21 = 53,
-    P1_22 = 54,
-    P1_23 = 55,
-    P1_24 = 56,
-    P1_25 = 57,
-    P1_26 = 58,
-    P1_27 = 59,
-    P1_28 = 60,
-    P1_29 = 61,
-
-    P1_31 = 63,
-
-    // mbed DIP Pin Names
-    p5  = P0_9,
-    p6  = P0_8,
-    p7  = P1_29,
-    p8  = P0_2,
-    p9  = P1_27,
-    p10 = P1_26,
-    p11 = P1_22,
-    p12 = P1_21,
-    p13 = P1_20,
-    p14 = P1_23,
-    p15 = P0_11,
-    p16 = P0_12,
-    p17 = P0_13,
-    p18 = P0_14,
-    p19 = P0_16,
-    p20 = P0_22,
-    p21 = P0_7,
-    p22 = P0_17,
-    p23 = P1_17,
-    p24 = P1_18,
-    p25 = P1_24,
-    p26 = P1_25,
-    p27 = P0_4,
-    p28 = P0_5,
-    p29 = P1_5,
-    p30 = P1_2,
-
-    p33 = P0_3,
-    p34 = P1_15,
-    p35 = P0_20,
-    p36 = P0_21,
 
     // Other mbed Pin Names
-    LED1 = P1_8,
-    LED2 = P1_9,
-    LED3 = P1_10,
-    LED4 = P1_11,
+    LED1 = P0_7,
+    LED2 = P0_8,
+    LED3 = P0_2,
+    LED4 = P0_20,
+    LED5 = P1_19,
+    LED6 = P0_17,
+    LED7 = P0_23,
 
     USBTX = P0_19,
     USBRX = P0_18,
 
-    // for Arch V1.1
-    D0 = P0_18,
-    D1 = P0_19,
-    D2 = P0_17,
-    D3 = P1_17,
-    D4 = P1_18,
-    D5 = P1_24,
-    D6 = P1_25,
-    D7 = P1_5,
-    D8 = P1_26,
-    D9 = P1_27,
-    D10 = P0_2,
-    D11 = P0_9,  // P1_29 for Arch V1.0
-    D12 = P0_8,
-    D13 = P1_29, // P0_9 for Arch V1.0
-
-    D14 = P0_5,
-    D15 = P0_4,
-
-    A0 = P0_11,
-    A1 = P0_12,
-    A2 = P0_13,
-    A3 = P0_14,
-    A4 = P0_16,
-    A5 = P0_22,
-
-    I2C_SCL = D15,
-    I2C_SDA = D14,
+    I2C_SCL = P0_4,
+    I2C_SDA = P0_5,
 
     // Not connected
     NC = (int)0xFFFFFFFF,

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_301/PeripheralPins.c	Wed Aug 06 08:15:07 2014 +0100
@@ -0,0 +1,117 @@
+
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ 
+#include "PeripheralPins.h"
+
+/************ADC***************/
+const PinMap PinMap_ADC[] = {
+    {P0_11, ADC0_0, 0x02},
+    {P0_12, ADC0_1, 0x02},
+    {P0_13, ADC0_2, 0x02},
+    {P0_14, ADC0_3, 0x02},
+    {P0_15, ADC0_4, 0x02},
+    {P0_16, ADC0_5, 0x01},
+    {P0_22, ADC0_6, 0x01},
+    {P0_23, ADC0_7, 0x01},
+    {NC   , NC    , 0   }
+};
+
+/************I2C***************/
+const PinMap PinMap_I2C_SDA[] = {
+    {P0_5, I2C_0, 1},
+    {NC  , NC   , 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+    {P0_4, I2C_0, 1},
+    {NC  , NC,    0}
+};
+
+/************UART***************/
+const PinMap PinMap_UART_TX[] = {
+    {P0_19, UART_0, 1},
+    {P1_13, UART_0, 3},
+    {P1_27, UART_0, 2},
+    { NC  , NC    , 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+    {P0_18, UART_0, 1},
+    {P1_14, UART_0, 3},
+    {P1_26, UART_0, 2},
+    {NC   , NC    , 0}
+};
+
+/************SPI***************/
+const PinMap PinMap_SPI_SCLK[] = {
+    {P0_6 , SPI_0, 0x02},
+    {P0_10, SPI_0, 0x02},
+    {P1_29, SPI_0, 0x01},
+    {P1_15, SPI_1, 0x03},
+    {P1_20, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_MOSI[] = {
+    {P0_9 , SPI_0, 0x01},
+    {P0_21, SPI_1, 0x02},
+    {P1_22, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+    {P0_8 , SPI_0, 0x01},
+    {P0_22, SPI_1, 0x03},
+    {P1_21, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+    {P0_2 , SPI_0, 0x01},
+    {P1_19, SPI_1, 0x02},
+    {P1_23, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+/************PWM***************/
+/* To have a PWM where we can change both the period and the duty cycle,
+ * we need an entire timer. With the following conventions:
+ *   * MR3 is used for the PWM period
+ *   * MR0, MR1, MR2 are used for the duty cycle
+ */
+const PinMap PinMap_PWM[] = {
+    /* CT16B0 */
+    {P0_8 , PWM_1, 2}, {P1_13, PWM_1, 2},    /* MR0 */
+    {P0_9 , PWM_2, 2}, {P1_14, PWM_2, 2},   /* MR1 */
+    {P0_10, PWM_3, 3}, {P1_15, PWM_3, 2},   /* MR2 */
+
+    /* CT16B1 */
+    {P0_21, PWM_4, 1},                      /* MR0 */
+    {P0_22, PWM_5, 2}, {P1_23, PWM_5, 1},   /* MR1 */
+
+    /* CT32B0 */
+    {P0_18, PWM_6, 2}, {P1_24, PWM_6, 1},   /* MR0 */
+    {P0_19, PWM_7, 2}, {P1_25, PWM_7, 1},   /* MR1 */
+    {P0_1 , PWM_8, 2}, {P1_26, PWM_8, 1},   /* MR2 */
+
+    /* CT32B1 */
+    {P0_13, PWM_9 , 3}, {P1_0, PWM_9 , 1},  /* MR0 */
+    {P0_14, PWM_10, 3}, {P1_1, PWM_10, 1},  /* MR1 */
+    {P0_15, PWM_11, 3}, {P1_2, PWM_11, 1},  /* MR2 */
+
+    {NC, NC, 0}
+};

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_401/PeripheralPins.c	Wed Aug 06 08:15:07 2014 +0100
@@ -0,0 +1,117 @@
+
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ 
+#include "PeripheralPins.h"
+
+/************ADC***************/
+const PinMap PinMap_ADC[] = {
+    {P0_11, ADC0_0, 0x02},
+    {P0_12, ADC0_1, 0x02},
+    {P0_13, ADC0_2, 0x02},
+    {P0_14, ADC0_3, 0x02},
+    {P0_15, ADC0_4, 0x02},
+    {P0_16, ADC0_5, 0x01},
+    {P0_22, ADC0_6, 0x01},
+    {P0_23, ADC0_7, 0x01},
+    {NC   , NC    , 0   }
+};
+
+/************I2C***************/
+const PinMap PinMap_I2C_SDA[] = {
+    {P0_5, I2C_0, 1},
+    {NC  , NC   , 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+    {P0_4, I2C_0, 1},
+    {NC  , NC,    0}
+};
+
+/************UART***************/
+const PinMap PinMap_UART_TX[] = {
+    {P0_19, UART_0, 1},
+    {P1_13, UART_0, 3},
+    {P1_27, UART_0, 2},
+    { NC  , NC    , 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+    {P0_18, UART_0, 1},
+    {P1_14, UART_0, 3},
+    {P1_26, UART_0, 2},
+    {NC   , NC    , 0}
+};
+
+/************SPI***************/
+const PinMap PinMap_SPI_SCLK[] = {
+    {P0_6 , SPI_0, 0x02},
+    {P0_10, SPI_0, 0x02},
+    {P1_29, SPI_0, 0x01},
+    {P1_15, SPI_1, 0x03},
+    {P1_20, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_MOSI[] = {
+    {P0_9 , SPI_0, 0x01},
+    {P0_21, SPI_1, 0x02},
+    {P1_22, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+    {P0_8 , SPI_0, 0x01},
+    {P0_22, SPI_1, 0x03},
+    {P1_21, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+    {P0_2 , SPI_0, 0x01},
+    {P1_19, SPI_1, 0x02},
+    {P1_23, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+/************PWM***************/
+/* To have a PWM where we can change both the period and the duty cycle,
+ * we need an entire timer. With the following conventions:
+ *   * MR3 is used for the PWM period
+ *   * MR0, MR1, MR2 are used for the duty cycle
+ */
+const PinMap PinMap_PWM[] = {
+    /* CT16B0 */
+    {P0_8 , PWM_1, 2}, {P1_13, PWM_1, 2},    /* MR0 */
+    {P0_9 , PWM_2, 2}, {P1_14, PWM_2, 2},   /* MR1 */
+    {P0_10, PWM_3, 3}, {P1_15, PWM_3, 2},   /* MR2 */
+
+    /* CT16B1 */
+    {P0_21, PWM_4, 1},                      /* MR0 */
+    {P0_22, PWM_5, 2}, {P1_23, PWM_5, 1},   /* MR1 */
+
+    /* CT32B0 */
+    {P0_18, PWM_6, 2}, {P1_24, PWM_6, 1},   /* MR0 */
+    {P0_19, PWM_7, 2}, {P1_25, PWM_7, 1},   /* MR1 */
+    {P0_1 , PWM_8, 2}, {P1_26, PWM_8, 1},   /* MR2 */
+
+    /* CT32B1 */
+    {P0_13, PWM_9 , 3}, {P1_0, PWM_9 , 1},  /* MR0 */
+    {P0_14, PWM_10, 3}, {P1_1, PWM_10, 1},  /* MR1 */
+    {P0_15, PWM_11, 3}, {P1_2, PWM_11, 1},  /* MR2 */
+
+    {NC, NC, 0}
+};

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U35_401/PeripheralPins.c	Wed Aug 06 08:15:07 2014 +0100
@@ -0,0 +1,117 @@
+
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ 
+#include "PeripheralPins.h"
+
+/************ADC***************/
+const PinMap PinMap_ADC[] = {
+    {P0_11, ADC0_0, 0x02},
+    {P0_12, ADC0_1, 0x02},
+    {P0_13, ADC0_2, 0x02},
+    {P0_14, ADC0_3, 0x02},
+    {P0_15, ADC0_4, 0x02},
+    {P0_16, ADC0_5, 0x01},
+    {P0_22, ADC0_6, 0x01},
+    {P0_23, ADC0_7, 0x01},
+    {NC   , NC    , 0   }
+};
+
+/************I2C***************/
+const PinMap PinMap_I2C_SDA[] = {
+    {P0_5, I2C_0, 1},
+    {NC  , NC   , 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+    {P0_4, I2C_0, 1},
+    {NC  , NC,    0}
+};
+
+/************UART***************/
+const PinMap PinMap_UART_TX[] = {
+    {P0_19, UART_0, 1},
+    {P1_13, UART_0, 3},
+    {P1_27, UART_0, 2},
+    { NC  , NC    , 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+    {P0_18, UART_0, 1},
+    {P1_14, UART_0, 3},
+    {P1_26, UART_0, 2},
+    {NC   , NC    , 0}
+};
+
+/************SPI***************/
+const PinMap PinMap_SPI_SCLK[] = {
+    {P0_6 , SPI_0, 0x02},
+    {P0_10, SPI_0, 0x02},
+    {P1_29, SPI_0, 0x01},
+    {P1_15, SPI_1, 0x03},
+    {P1_20, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_MOSI[] = {
+    {P0_9 , SPI_0, 0x01},
+    {P0_21, SPI_1, 0x02},
+    {P1_22, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+    {P0_8 , SPI_0, 0x01},
+    {P0_22, SPI_1, 0x03},
+    {P1_21, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+    {P0_2 , SPI_0, 0x01},
+    {P1_19, SPI_1, 0x02},
+    {P1_23, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+/************PWM***************/
+/* To have a PWM where we can change both the period and the duty cycle,
+ * we need an entire timer. With the following conventions:
+ *   * MR3 is used for the PWM period
+ *   * MR0, MR1, MR2 are used for the duty cycle
+ */
+const PinMap PinMap_PWM[] = {
+    /* CT16B0 */
+    {P0_8 , PWM_1, 2}, {P1_13, PWM_1, 2},    /* MR0 */
+    {P0_9 , PWM_2, 2}, {P1_14, PWM_2, 2},   /* MR1 */
+    {P0_10, PWM_3, 3}, {P1_15, PWM_3, 2},   /* MR2 */
+
+    /* CT16B1 */
+    {P0_21, PWM_4, 1},                      /* MR0 */
+    {P0_22, PWM_5, 2}, {P1_23, PWM_5, 1},   /* MR1 */
+
+    /* CT32B0 */
+    {P0_18, PWM_6, 2}, {P1_24, PWM_6, 1},   /* MR0 */
+    {P0_19, PWM_7, 2}, {P1_25, PWM_7, 1},   /* MR1 */
+    {P0_1 , PWM_8, 2}, {P1_26, PWM_8, 1},   /* MR2 */
+
+    /* CT32B1 */
+    {P0_13, PWM_9 , 3}, {P1_0, PWM_9 , 1},  /* MR0 */
+    {P0_14, PWM_10, 3}, {P1_1, PWM_10, 1},  /* MR1 */
+    {P0_15, PWM_11, 3}, {P1_2, PWM_11, 1},  /* MR2 */
+
+    {NC, NC, 0}
+};

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U35_501/PeripheralPins.c	Wed Aug 06 08:15:07 2014 +0100
@@ -0,0 +1,117 @@
+
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ 
+#include "PeripheralPins.h"
+
+/************ADC***************/
+const PinMap PinMap_ADC[] = {
+    {P0_11, ADC0_0, 0x02},
+    {P0_12, ADC0_1, 0x02},
+    {P0_13, ADC0_2, 0x02},
+    {P0_14, ADC0_3, 0x02},
+    {P0_15, ADC0_4, 0x02},
+    {P0_16, ADC0_5, 0x01},
+    {P0_22, ADC0_6, 0x01},
+    {P0_23, ADC0_7, 0x01},
+    {NC   , NC    , 0   }
+};
+
+/************I2C***************/
+const PinMap PinMap_I2C_SDA[] = {
+    {P0_5, I2C_0, 1},
+    {NC  , NC   , 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+    {P0_4, I2C_0, 1},
+    {NC  , NC,    0}
+};
+
+/************UART***************/
+const PinMap PinMap_UART_TX[] = {
+    {P0_19, UART_0, 1},
+    {P1_13, UART_0, 3},
+    {P1_27, UART_0, 2},
+    { NC  , NC    , 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+    {P0_18, UART_0, 1},
+    {P1_14, UART_0, 3},
+    {P1_26, UART_0, 2},
+    {NC   , NC    , 0}
+};
+
+/************SPI***************/
+const PinMap PinMap_SPI_SCLK[] = {
+    {P0_6 , SPI_0, 0x02},
+    {P0_10, SPI_0, 0x02},
+    {P1_29, SPI_0, 0x01},
+    {P1_15, SPI_1, 0x03},
+    {P1_20, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_MOSI[] = {
+    {P0_9 , SPI_0, 0x01},
+    {P0_21, SPI_1, 0x02},
+    {P1_22, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+    {P0_8 , SPI_0, 0x01},
+    {P0_22, SPI_1, 0x03},
+    {P1_21, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+    {P0_2 , SPI_0, 0x01},
+    {P1_19, SPI_1, 0x02},
+    {P1_23, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+/************PWM***************/
+/* To have a PWM where we can change both the period and the duty cycle,
+ * we need an entire timer. With the following conventions:
+ *   * MR3 is used for the PWM period
+ *   * MR0, MR1, MR2 are used for the duty cycle
+ */
+const PinMap PinMap_PWM[] = {
+    /* CT16B0 */
+    {P0_8 , PWM_1, 2}, {P1_13, PWM_1, 2},    /* MR0 */
+    {P0_9 , PWM_2, 2}, {P1_14, PWM_2, 2},   /* MR1 */
+    {P0_10, PWM_3, 3}, {P1_15, PWM_3, 2},   /* MR2 */
+
+    /* CT16B1 */
+    {P0_21, PWM_4, 1},                      /* MR0 */
+    {P0_22, PWM_5, 2}, {P1_23, PWM_5, 1},   /* MR1 */
+
+    /* CT32B0 */
+    {P0_18, PWM_6, 2}, {P1_24, PWM_6, 1},   /* MR0 */
+    {P0_19, PWM_7, 2}, {P1_25, PWM_7, 1},   /* MR1 */
+    {P0_1 , PWM_8, 2}, {P1_26, PWM_8, 1},   /* MR2 */
+
+    /* CT32B1 */
+    {P0_13, PWM_9 , 3}, {P1_0, PWM_9 , 1},  /* MR0 */
+    {P0_14, PWM_10, 3}, {P1_1, PWM_10, 1},  /* MR1 */
+    {P0_15, PWM_11, 3}, {P1_2, PWM_11, 1},  /* MR2 */
+
+    {NC, NC, 0}
+};

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPCCAPPUCCINO/PeripheralPins.c	Wed Aug 06 08:15:07 2014 +0100
@@ -0,0 +1,117 @@
+
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ 
+#include "PeripheralPins.h"
+
+/************ADC***************/
+const PinMap PinMap_ADC[] = {
+    {P0_11, ADC0_0, 0x02},
+    {P0_12, ADC0_1, 0x02},
+    {P0_13, ADC0_2, 0x02},
+    {P0_14, ADC0_3, 0x02},
+    {P0_15, ADC0_4, 0x02},
+    {P0_16, ADC0_5, 0x01},
+    {P0_22, ADC0_6, 0x01},
+    {P0_23, ADC0_7, 0x01},
+    {NC   , NC    , 0   }
+};
+
+/************I2C***************/
+const PinMap PinMap_I2C_SDA[] = {
+    {P0_5, I2C_0, 1},
+    {NC  , NC   , 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+    {P0_4, I2C_0, 1},
+    {NC  , NC,    0}
+};
+
+/************UART***************/
+const PinMap PinMap_UART_TX[] = {
+    {P0_19, UART_0, 1},
+    {P1_13, UART_0, 3},
+    {P1_27, UART_0, 2},
+    { NC  , NC    , 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+    {P0_18, UART_0, 1},
+    {P1_14, UART_0, 3},
+    {P1_26, UART_0, 2},
+    {NC   , NC    , 0}
+};
+
+/************SPI***************/
+const PinMap PinMap_SPI_SCLK[] = {
+    {P0_6 , SPI_0, 0x02},
+    {P0_10, SPI_0, 0x02},
+    {P1_29, SPI_0, 0x01},
+    {P1_15, SPI_1, 0x03},
+    {P1_20, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_MOSI[] = {
+    {P0_9 , SPI_0, 0x01},
+    {P0_21, SPI_1, 0x02},
+    {P1_22, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+    {P0_8 , SPI_0, 0x01},
+    {P0_22, SPI_1, 0x03},
+    {P1_21, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+    {P0_2 , SPI_0, 0x01},
+    {P1_19, SPI_1, 0x02},
+    {P1_23, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+/************PWM***************/
+/* To have a PWM where we can change both the period and the duty cycle,
+ * we need an entire timer. With the following conventions:
+ *   * MR3 is used for the PWM period
+ *   * MR0, MR1, MR2 are used for the duty cycle
+ */
+const PinMap PinMap_PWM[] = {
+    /* CT16B0 */
+    {P0_8 , PWM_1, 2}, {P1_13, PWM_1, 2},    /* MR0 */
+    {P0_9 , PWM_2, 2}, {P1_14, PWM_2, 2},   /* MR1 */
+    {P0_10, PWM_3, 3}, {P1_15, PWM_3, 2},   /* MR2 */
+
+    /* CT16B1 */
+    {P0_21, PWM_4, 1},                      /* MR0 */
+    {P0_22, PWM_5, 2}, {P1_23, PWM_5, 1},   /* MR1 */
+
+    /* CT32B0 */
+    {P0_18, PWM_6, 2}, {P1_24, PWM_6, 1},   /* MR0 */
+    {P0_19, PWM_7, 2}, {P1_25, PWM_7, 1},   /* MR1 */
+    {P0_1 , PWM_8, 2}, {P1_26, PWM_8, 1},   /* MR2 */
+
+    /* CT32B1 */
+    {P0_13, PWM_9 , 3}, {P1_0, PWM_9 , 1},  /* MR0 */
+    {P0_14, PWM_10, 3}, {P1_1, PWM_10, 1},  /* MR1 */
+    {P0_15, PWM_11, 3}, {P1_2, PWM_11, 1},  /* MR2 */
+
+    {NC, NC, 0}
+};

--- a/targets/hal/TARGET_NXP/TARGET_LPC11UXX/analogin_api.c	Wed Aug 06 07:45:07 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/analogin_api.c	Wed Aug 06 08:15:07 2014 +0100
@@ -18,6 +18,7 @@
 #include "cmsis.h"
 #include "pinmap.h"
 #include "error.h"
+#include "PeripheralPins.h" // For the Peripheral to Pin Definitions found in the individual Target's Platform
 
 #define ANALOGIN_MEDIAN_FILTER      1
 
@@ -28,18 +29,6 @@
   return (x + (y - 1)) / y;
 }
 
-static const PinMap PinMap_ADC[] = {
-    {P0_11, ADC0_0, 0x02},
-    {P0_12, ADC0_1, 0x02},
-    {P0_13, ADC0_2, 0x02},
-    {P0_14, ADC0_3, 0x02},
-    {P0_15, ADC0_4, 0x02},
-    {P0_16, ADC0_5, 0x01},
-    {P0_22, ADC0_6, 0x01},
-    {P0_23, ADC0_7, 0x01},
-    {NC   , NC    , 0   }
-};
-
 #define LPC_IOCON0_BASE (LPC_IOCON_BASE)
 #define LPC_IOCON1_BASE (LPC_IOCON_BASE + 0x60)
 

--- a/targets/hal/TARGET_NXP/TARGET_LPC11UXX/i2c_api.c	Wed Aug 06 07:45:07 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/i2c_api.c	Wed Aug 06 08:15:07 2014 +0100
@@ -17,16 +17,7 @@
 #include "i2c_api.h"
 #include "cmsis.h"
 #include "pinmap.h"
-
-static const PinMap PinMap_I2C_SDA[] = {
-    {P0_5, I2C_0, 1},
-    {NC  , NC   , 0}
-};
-
-static const PinMap PinMap_I2C_SCL[] = {
-    {P0_4, I2C_0, 1},
-    {NC  , NC,    0}
-};
+#include "PeripheralPins.h" // For the Peripheral to Pin Definitions found in the individual Target's Platform
 
 #define I2C_CONSET(x)       (x->i2c->CONSET)
 #define I2C_CONCLR(x)       (x->i2c->CONCLR)

--- a/targets/hal/TARGET_NXP/TARGET_LPC11UXX/pwmout_api.c	Wed Aug 06 07:45:07 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/pwmout_api.c	Wed Aug 06 08:15:07 2014 +0100
@@ -17,38 +17,11 @@
 #include "pwmout_api.h"
 #include "cmsis.h"
 #include "pinmap.h"
+#include "PeripheralPins.h" // For the Peripheral to Pin Definitions found in the individual Target's Platform
 
 #define TCR_CNT_EN       0x00000001
 #define TCR_RESET        0x00000002
 
-/* To have a PWM where we can change both the period and the duty cycle,
- * we need an entire timer. With the following conventions:
- *   * MR3 is used for the PWM period
- *   * MR0, MR1, MR2 are used for the duty cycle
- */
-static const PinMap PinMap_PWM[] = {
-    /* CT16B0 */
-    {P0_8 , PWM_1, 2}, {P1_13, PWM_1, 2},    /* MR0 */
-    {P0_9 , PWM_2, 2}, {P1_14, PWM_2, 2},   /* MR1 */
-    {P0_10, PWM_3, 3}, {P1_15, PWM_3, 2},   /* MR2 */
-
-    /* CT16B1 */
-    {P0_21, PWM_4, 1},                      /* MR0 */
-    {P0_22, PWM_5, 2}, {P1_23, PWM_5, 1},   /* MR1 */
-
-    /* CT32B0 */
-    {P0_18, PWM_6, 2}, {P1_24, PWM_6, 1},   /* MR0 */
-    {P0_19, PWM_7, 2}, {P1_25, PWM_7, 1},   /* MR1 */
-    {P0_1 , PWM_8, 2}, {P1_26, PWM_8, 1},   /* MR2 */
-
-    /* CT32B1 */
-    {P0_13, PWM_9 , 3}, {P1_0, PWM_9 , 1},  /* MR0 */
-    {P0_14, PWM_10, 3}, {P1_1, PWM_10, 1},  /* MR1 */
-    {P0_15, PWM_11, 3}, {P1_2, PWM_11, 1},  /* MR2 */
-
-    {NC, NC, 0}
-};
-
 typedef struct {
     uint8_t timer;
     uint8_t mr;

--- a/targets/hal/TARGET_NXP/TARGET_LPC11UXX/serial_api.c	Wed Aug 06 07:45:07 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/serial_api.c	Wed Aug 06 08:15:07 2014 +0100
@@ -21,26 +21,13 @@
 #include "serial_api.h"
 #include "cmsis.h"
 #include "pinmap.h"
+#include "PeripheralPins.h" // For the Peripheral to Pin Definitions found in the individual Target's Platform
 
 /******************************************************************************
  * INITIALIZATION
  ******************************************************************************/
 #define UART_NUM    1
 
-static const PinMap PinMap_UART_TX[] = {
-    {P0_19, UART_0, 1},
-    {P1_13, UART_0, 3},
-    {P1_27, UART_0, 2},
-    { NC  , NC    , 0}
-};
-
-static const PinMap PinMap_UART_RX[] = {
-    {P0_18, UART_0, 1},
-    {P1_14, UART_0, 3},
-    {P1_26, UART_0, 2},
-    {NC   , NC    , 0}
-};
-
 static uint32_t serial_irq_ids[UART_NUM] = {0};
 static uart_irq_handler irq_handler;
 

--- a/targets/hal/TARGET_NXP/TARGET_LPC11UXX/spi_api.c	Wed Aug 06 07:45:07 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/spi_api.c	Wed Aug 06 08:15:07 2014 +0100
@@ -19,36 +19,7 @@
 #include "cmsis.h"
 #include "pinmap.h"
 #include "error.h"
-
-static const PinMap PinMap_SPI_SCLK[] = {
-    {P0_6 , SPI_0, 0x02},
-    {P0_10, SPI_0, 0x02},
-    {P1_29, SPI_0, 0x01},
-    {P1_15, SPI_1, 0x03},
-    {P1_20, SPI_1, 0x02},
-    {NC   , NC   , 0}
-};
-
-static const PinMap PinMap_SPI_MOSI[] = {
-    {P0_9 , SPI_0, 0x01},
-    {P0_21, SPI_1, 0x02},
-    {P1_22, SPI_1, 0x02},
-    {NC   , NC   , 0}
-};
-
-static const PinMap PinMap_SPI_MISO[] = {
-    {P0_8 , SPI_0, 0x01},
-    {P0_22, SPI_1, 0x03},
-    {P1_21, SPI_1, 0x02},
-    {NC   , NC   , 0}
-};
-
-static const PinMap PinMap_SPI_SSEL[] = {
-    {P0_2 , SPI_0, 0x01},
-    {P1_19, SPI_1, 0x02},
-    {P1_23, SPI_1, 0x02},
-    {NC   , NC   , 0}
-};
+#include "PeripheralPins.h" // For the Peripheral to Pin Definitions found in the individual Target's Platform
 
 static inline int ssp_disable(spi_t *obj);
 static inline int ssp_enable(spi_t *obj);