mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/device/MK64F12/MK64F12_fb.h
- Committer:
- shaoziyang
- Date:
- 2014-09-13
- Revision:
- 323:9e901b0a5aa1
- Parent:
- 320:be04b2b1e3f2
File content as of revision 323:9e901b0a5aa1:
/* * Copyright (c) 2014, Freescale Semiconductor, Inc. * All rights reserved. * * THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. */ /* * WARNING! DO NOT EDIT THIS FILE DIRECTLY! * * This file was generated automatically and any changes may be lost. */ #ifndef __HW_FB_REGISTERS_H__ #define __HW_FB_REGISTERS_H__ #include "regs.h" /* * MK64F12 FB * * FlexBus external bus interface * * Registers defined in this header file: * - HW_FB_CSARn - Chip Select Address Register * - HW_FB_CSMRn - Chip Select Mask Register * - HW_FB_CSCRn - Chip Select Control Register * - HW_FB_CSPMCR - Chip Select port Multiplexing Control Register * * - hw_fb_t - Struct containing all module registers. */ //! @name Module base addresses //@{ #ifndef REGS_FB_BASE #define HW_FB_INSTANCE_COUNT (1U) //!< Number of instances of the FB module. #define REGS_FB_BASE (0x4000C000U) //!< Base address for FB. #endif //@} //------------------------------------------------------------------------------------------- // HW_FB_CSARn - Chip Select Address Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_FB_CSARn - Chip Select Address Register (RW) * * Reset value: 0x00000000U * * Specifies the associated chip-select's base address. */ typedef union _hw_fb_csarn { uint32_t U; struct _hw_fb_csarn_bitfields { uint32_t RESERVED0 : 16; //!< [15:0] uint32_t BA : 16; //!< [31:16] Base Address } B; } hw_fb_csarn_t; #endif /*! * @name Constants and macros for entire FB_CSARn register */ //@{ #define HW_FB_CSARn_COUNT (6U) #define HW_FB_CSARn_ADDR(n) (REGS_FB_BASE + 0x0U + (0xCU * n)) #ifndef __LANGUAGE_ASM__ #define HW_FB_CSARn(n) (*(__IO hw_fb_csarn_t *) HW_FB_CSARn_ADDR(n)) #define HW_FB_CSARn_RD(n) (HW_FB_CSARn(n).U) #define HW_FB_CSARn_WR(n, v) (HW_FB_CSARn(n).U = (v)) #define HW_FB_CSARn_SET(n, v) (HW_FB_CSARn_WR(n, HW_FB_CSARn_RD(n) | (v))) #define HW_FB_CSARn_CLR(n, v) (HW_FB_CSARn_WR(n, HW_FB_CSARn_RD(n) & ~(v))) #define HW_FB_CSARn_TOG(n, v) (HW_FB_CSARn_WR(n, HW_FB_CSARn_RD(n) ^ (v))) #endif //@} /* * Constants & macros for individual FB_CSARn bitfields */ /*! * @name Register FB_CSARn, field BA[31:16] (RW) * * Defines the base address for memory dedicated to the associated chip-select. * BA is compared to bits 31-16 on the internal address bus to determine if the * associated chip-select's memory is being accessed. Because the FlexBus module * is one of the slaves connected to the crossbar switch, it is only accessible * within a certain memory range. See the chip memory map for the applicable * FlexBus "expansion" address range for which the chip-selects can be active. Set the * CSARn and CSMRn registers appropriately before accessing this region. */ //@{ #define BP_FB_CSARn_BA (16U) //!< Bit position for FB_CSARn_BA. #define BM_FB_CSARn_BA (0xFFFF0000U) //!< Bit mask for FB_CSARn_BA. #define BS_FB_CSARn_BA (16U) //!< Bit field size in bits for FB_CSARn_BA. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSARn_BA field. #define BR_FB_CSARn_BA(n) (HW_FB_CSARn(n).B.BA) #endif //! @brief Format value for bitfield FB_CSARn_BA. #define BF_FB_CSARn_BA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSARn_BA), uint32_t) & BM_FB_CSARn_BA) #ifndef __LANGUAGE_ASM__ //! @brief Set the BA field to a new value. #define BW_FB_CSARn_BA(n, v) (HW_FB_CSARn_WR(n, (HW_FB_CSARn_RD(n) & ~BM_FB_CSARn_BA) | BF_FB_CSARn_BA(v))) #endif //@} //------------------------------------------------------------------------------------------- // HW_FB_CSMRn - Chip Select Mask Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_FB_CSMRn - Chip Select Mask Register (RW) * * Reset value: 0x00000000U * * Specifies the address mask and allowable access types for the associated * chip-select. */ typedef union _hw_fb_csmrn { uint32_t U; struct _hw_fb_csmrn_bitfields { uint32_t V : 1; //!< [0] Valid uint32_t RESERVED0 : 7; //!< [7:1] uint32_t WP : 1; //!< [8] Write Protect uint32_t RESERVED1 : 7; //!< [15:9] uint32_t BAM : 16; //!< [31:16] Base Address Mask } B; } hw_fb_csmrn_t; #endif /*! * @name Constants and macros for entire FB_CSMRn register */ //@{ #define HW_FB_CSMRn_COUNT (6U) #define HW_FB_CSMRn_ADDR(n) (REGS_FB_BASE + 0x4U + (0xCU * n)) #ifndef __LANGUAGE_ASM__ #define HW_FB_CSMRn(n) (*(__IO hw_fb_csmrn_t *) HW_FB_CSMRn_ADDR(n)) #define HW_FB_CSMRn_RD(n) (HW_FB_CSMRn(n).U) #define HW_FB_CSMRn_WR(n, v) (HW_FB_CSMRn(n).U = (v)) #define HW_FB_CSMRn_SET(n, v) (HW_FB_CSMRn_WR(n, HW_FB_CSMRn_RD(n) | (v))) #define HW_FB_CSMRn_CLR(n, v) (HW_FB_CSMRn_WR(n, HW_FB_CSMRn_RD(n) & ~(v))) #define HW_FB_CSMRn_TOG(n, v) (HW_FB_CSMRn_WR(n, HW_FB_CSMRn_RD(n) ^ (v))) #endif //@} /* * Constants & macros for individual FB_CSMRn bitfields */ /*! * @name Register FB_CSMRn, field V[0] (RW) * * Specifies whether the corresponding CSAR, CSMR, and CSCR contents are valid. * Programmed chip-selects do not assert until the V bit is 1b (except for * FB_CS0, which acts as the global chip-select). At reset, FB_CS0 will fire for any * access to the FlexBus memory region. CSMR0[V] must be set as part of the chip * select initialization sequence to allow other chip selects to function as * programmed. * * Values: * - 0 - Chip-select is invalid. * - 1 - Chip-select is valid. */ //@{ #define BP_FB_CSMRn_V (0U) //!< Bit position for FB_CSMRn_V. #define BM_FB_CSMRn_V (0x00000001U) //!< Bit mask for FB_CSMRn_V. #define BS_FB_CSMRn_V (1U) //!< Bit field size in bits for FB_CSMRn_V. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSMRn_V field. #define BR_FB_CSMRn_V(n) (BITBAND_ACCESS32(HW_FB_CSMRn_ADDR(n), BP_FB_CSMRn_V)) #endif //! @brief Format value for bitfield FB_CSMRn_V. #define BF_FB_CSMRn_V(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSMRn_V), uint32_t) & BM_FB_CSMRn_V) #ifndef __LANGUAGE_ASM__ //! @brief Set the V field to a new value. #define BW_FB_CSMRn_V(n, v) (BITBAND_ACCESS32(HW_FB_CSMRn_ADDR(n), BP_FB_CSMRn_V) = (v)) #endif //@} /*! * @name Register FB_CSMRn, field WP[8] (RW) * * Controls write accesses to the address range in the corresponding CSAR. * * Values: * - 0 - Write accesses are allowed. * - 1 - Write accesses are not allowed. Attempting to write to the range of * addresses for which the WP bit is set results in a bus error termination of * the internal cycle and no external cycle. */ //@{ #define BP_FB_CSMRn_WP (8U) //!< Bit position for FB_CSMRn_WP. #define BM_FB_CSMRn_WP (0x00000100U) //!< Bit mask for FB_CSMRn_WP. #define BS_FB_CSMRn_WP (1U) //!< Bit field size in bits for FB_CSMRn_WP. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSMRn_WP field. #define BR_FB_CSMRn_WP(n) (BITBAND_ACCESS32(HW_FB_CSMRn_ADDR(n), BP_FB_CSMRn_WP)) #endif //! @brief Format value for bitfield FB_CSMRn_WP. #define BF_FB_CSMRn_WP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSMRn_WP), uint32_t) & BM_FB_CSMRn_WP) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP field to a new value. #define BW_FB_CSMRn_WP(n, v) (BITBAND_ACCESS32(HW_FB_CSMRn_ADDR(n), BP_FB_CSMRn_WP) = (v)) #endif //@} /*! * @name Register FB_CSMRn, field BAM[31:16] (RW) * * Defines the associated chip-select's block size by masking address bits. * * Values: * - 0 - The corresponding address bit in CSAR is used in the chip-select decode. * - 1 - The corresponding address bit in CSAR is a don't care in the * chip-select decode. */ //@{ #define BP_FB_CSMRn_BAM (16U) //!< Bit position for FB_CSMRn_BAM. #define BM_FB_CSMRn_BAM (0xFFFF0000U) //!< Bit mask for FB_CSMRn_BAM. #define BS_FB_CSMRn_BAM (16U) //!< Bit field size in bits for FB_CSMRn_BAM. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSMRn_BAM field. #define BR_FB_CSMRn_BAM(n) (HW_FB_CSMRn(n).B.BAM) #endif //! @brief Format value for bitfield FB_CSMRn_BAM. #define BF_FB_CSMRn_BAM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSMRn_BAM), uint32_t) & BM_FB_CSMRn_BAM) #ifndef __LANGUAGE_ASM__ //! @brief Set the BAM field to a new value. #define BW_FB_CSMRn_BAM(n, v) (HW_FB_CSMRn_WR(n, (HW_FB_CSMRn_RD(n) & ~BM_FB_CSMRn_BAM) | BF_FB_CSMRn_BAM(v))) #endif //@} //------------------------------------------------------------------------------------------- // HW_FB_CSCRn - Chip Select Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_FB_CSCRn - Chip Select Control Register (RW) * * Reset value: 0x003FFC00U * * Controls the auto-acknowledge, address setup and hold times, port size, burst * capability, and number of wait states for the associated chip select. To * support the global chip-select (FB_CS0), the CSCR0 reset values differ from the * other CSCRs. The reset value of CSCR0 is as follows: Bits 31-24 are 0b Bit 23-3 * are chip-dependent Bits 3-0 are 0b See the chip configuration details for your * particular chip for information on the exact CSCR0 reset value. */ typedef union _hw_fb_cscrn { uint32_t U; struct _hw_fb_cscrn_bitfields { uint32_t RESERVED0 : 3; //!< [2:0] uint32_t BSTW : 1; //!< [3] Burst-Write Enable uint32_t BSTR : 1; //!< [4] Burst-Read Enable uint32_t BEM : 1; //!< [5] Byte-Enable Mode uint32_t PS : 2; //!< [7:6] Port Size uint32_t AA : 1; //!< [8] Auto-Acknowledge Enable uint32_t BLS : 1; //!< [9] Byte-Lane Shift uint32_t WS : 6; //!< [15:10] Wait States uint32_t WRAH : 2; //!< [17:16] Write Address Hold or Deselect uint32_t RDAH : 2; //!< [19:18] Read Address Hold or Deselect uint32_t ASET : 2; //!< [21:20] Address Setup uint32_t EXTS : 1; //!< [22] uint32_t SWSEN : 1; //!< [23] Secondary Wait State Enable uint32_t RESERVED1 : 2; //!< [25:24] uint32_t SWS : 6; //!< [31:26] Secondary Wait States } B; } hw_fb_cscrn_t; #endif /*! * @name Constants and macros for entire FB_CSCRn register */ //@{ #define HW_FB_CSCRn_COUNT (6U) #define HW_FB_CSCRn_ADDR(n) (REGS_FB_BASE + 0x8U + (0xCU * n)) #ifndef __LANGUAGE_ASM__ #define HW_FB_CSCRn(n) (*(__IO hw_fb_cscrn_t *) HW_FB_CSCRn_ADDR(n)) #define HW_FB_CSCRn_RD(n) (HW_FB_CSCRn(n).U) #define HW_FB_CSCRn_WR(n, v) (HW_FB_CSCRn(n).U = (v)) #define HW_FB_CSCRn_SET(n, v) (HW_FB_CSCRn_WR(n, HW_FB_CSCRn_RD(n) | (v))) #define HW_FB_CSCRn_CLR(n, v) (HW_FB_CSCRn_WR(n, HW_FB_CSCRn_RD(n) & ~(v))) #define HW_FB_CSCRn_TOG(n, v) (HW_FB_CSCRn_WR(n, HW_FB_CSCRn_RD(n) ^ (v))) #endif //@} /* * Constants & macros for individual FB_CSCRn bitfields */ /*! * @name Register FB_CSCRn, field BSTW[3] (RW) * * Specifies whether burst writes are enabled for memory associated with each * chip select. * * Values: * - 0 - Disabled. Data exceeding the specified port size is broken into * individual, port-sized, non-burst writes. For example, a 32-bit write to an 8-bit * port takes four byte writes. * - 1 - Enabled. Enables burst write of data larger than the specified port * size, including 32-bit writes to 8- and 16-bit ports, 16-bit writes to 8-bit * ports, and line writes to 8-, 16-, and 32-bit ports. */ //@{ #define BP_FB_CSCRn_BSTW (3U) //!< Bit position for FB_CSCRn_BSTW. #define BM_FB_CSCRn_BSTW (0x00000008U) //!< Bit mask for FB_CSCRn_BSTW. #define BS_FB_CSCRn_BSTW (1U) //!< Bit field size in bits for FB_CSCRn_BSTW. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSCRn_BSTW field. #define BR_FB_CSCRn_BSTW(n) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(n), BP_FB_CSCRn_BSTW)) #endif //! @brief Format value for bitfield FB_CSCRn_BSTW. #define BF_FB_CSCRn_BSTW(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSCRn_BSTW), uint32_t) & BM_FB_CSCRn_BSTW) #ifndef __LANGUAGE_ASM__ //! @brief Set the BSTW field to a new value. #define BW_FB_CSCRn_BSTW(n, v) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(n), BP_FB_CSCRn_BSTW) = (v)) #endif //@} /*! * @name Register FB_CSCRn, field BSTR[4] (RW) * * Specifies whether burst reads are enabled for memory associated with each * chip select. * * Values: * - 0 - Disabled. Data exceeding the specified port size is broken into * individual, port-sized, non-burst reads. For example, a 32-bit read from an 8-bit * port is broken into four 8-bit reads. * - 1 - Enabled. Enables data burst reads larger than the specified port size, * including 32-bit reads from 8- and 16-bit ports, 16-bit reads from 8-bit * ports, and line reads from 8-, 16-, and 32-bit ports. */ //@{ #define BP_FB_CSCRn_BSTR (4U) //!< Bit position for FB_CSCRn_BSTR. #define BM_FB_CSCRn_BSTR (0x00000010U) //!< Bit mask for FB_CSCRn_BSTR. #define BS_FB_CSCRn_BSTR (1U) //!< Bit field size in bits for FB_CSCRn_BSTR. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSCRn_BSTR field. #define BR_FB_CSCRn_BSTR(n) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(n), BP_FB_CSCRn_BSTR)) #endif //! @brief Format value for bitfield FB_CSCRn_BSTR. #define BF_FB_CSCRn_BSTR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSCRn_BSTR), uint32_t) & BM_FB_CSCRn_BSTR) #ifndef __LANGUAGE_ASM__ //! @brief Set the BSTR field to a new value. #define BW_FB_CSCRn_BSTR(n, v) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(n), BP_FB_CSCRn_BSTR) = (v)) #endif //@} /*! * @name Register FB_CSCRn, field BEM[5] (RW) * * Specifies whether the corresponding FB_BE is asserted for read accesses. * Certain memories have byte enables that must be asserted during reads and writes. * Write 1b to the BEM bit in the relevant CSCR to provide the appropriate mode * of byte enable support for these SRAMs. * * Values: * - 0 - FB_BE is asserted for data write only. * - 1 - FB_BE is asserted for data read and write accesses. */ //@{ #define BP_FB_CSCRn_BEM (5U) //!< Bit position for FB_CSCRn_BEM. #define BM_FB_CSCRn_BEM (0x00000020U) //!< Bit mask for FB_CSCRn_BEM. #define BS_FB_CSCRn_BEM (1U) //!< Bit field size in bits for FB_CSCRn_BEM. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSCRn_BEM field. #define BR_FB_CSCRn_BEM(n) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(n), BP_FB_CSCRn_BEM)) #endif //! @brief Format value for bitfield FB_CSCRn_BEM. #define BF_FB_CSCRn_BEM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSCRn_BEM), uint32_t) & BM_FB_CSCRn_BEM) #ifndef __LANGUAGE_ASM__ //! @brief Set the BEM field to a new value. #define BW_FB_CSCRn_BEM(n, v) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(n), BP_FB_CSCRn_BEM) = (v)) #endif //@} /*! * @name Register FB_CSCRn, field PS[7:6] (RW) * * Specifies the data port width of the associated chip-select, and determines * where data is driven during write cycles and where data is sampled during read * cycles. * * Values: * - 00 - 32-bit port size. Valid data is sampled and driven on FB_D[31:0]. * - 01 - 8-bit port size. Valid data is sampled and driven on FB_D[31:24] when * BLS is 0b, or FB_D[7:0] when BLS is 1b. */ //@{ #define BP_FB_CSCRn_PS (6U) //!< Bit position for FB_CSCRn_PS. #define BM_FB_CSCRn_PS (0x000000C0U) //!< Bit mask for FB_CSCRn_PS. #define BS_FB_CSCRn_PS (2U) //!< Bit field size in bits for FB_CSCRn_PS. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSCRn_PS field. #define BR_FB_CSCRn_PS(n) (HW_FB_CSCRn(n).B.PS) #endif //! @brief Format value for bitfield FB_CSCRn_PS. #define BF_FB_CSCRn_PS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSCRn_PS), uint32_t) & BM_FB_CSCRn_PS) #ifndef __LANGUAGE_ASM__ //! @brief Set the PS field to a new value. #define BW_FB_CSCRn_PS(n, v) (HW_FB_CSCRn_WR(n, (HW_FB_CSCRn_RD(n) & ~BM_FB_CSCRn_PS) | BF_FB_CSCRn_PS(v))) #endif //@} /*! * @name Register FB_CSCRn, field AA[8] (RW) * * Asserts the internal transfer acknowledge for accesses specified by the * chip-select address. If AA is 1b for a corresponding FB_CSn and the external system * asserts an external FB_TA before the wait-state countdown asserts the * internal FB_TA, the cycle is terminated. Burst cycles increment the address bus * between each internal termination. This field must be 1b if CSPMCR disables FB_TA. * * Values: * - 0 - Disabled. No internal transfer acknowledge is asserted and the cycle is * terminated externally. * - 1 - Enabled. Internal transfer acknowledge is asserted as specified by WS. */ //@{ #define BP_FB_CSCRn_AA (8U) //!< Bit position for FB_CSCRn_AA. #define BM_FB_CSCRn_AA (0x00000100U) //!< Bit mask for FB_CSCRn_AA. #define BS_FB_CSCRn_AA (1U) //!< Bit field size in bits for FB_CSCRn_AA. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSCRn_AA field. #define BR_FB_CSCRn_AA(n) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(n), BP_FB_CSCRn_AA)) #endif //! @brief Format value for bitfield FB_CSCRn_AA. #define BF_FB_CSCRn_AA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSCRn_AA), uint32_t) & BM_FB_CSCRn_AA) #ifndef __LANGUAGE_ASM__ //! @brief Set the AA field to a new value. #define BW_FB_CSCRn_AA(n, v) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(n), BP_FB_CSCRn_AA) = (v)) #endif //@} /*! * @name Register FB_CSCRn, field BLS[9] (RW) * * Specifies if data on FB_AD appears left-aligned or right-aligned during the * data phase of a FlexBus access. * * Values: * - 0 - Not shifted. Data is left-aligned on FB_AD. * - 1 - Shifted. Data is right-aligned on FB_AD. */ //@{ #define BP_FB_CSCRn_BLS (9U) //!< Bit position for FB_CSCRn_BLS. #define BM_FB_CSCRn_BLS (0x00000200U) //!< Bit mask for FB_CSCRn_BLS. #define BS_FB_CSCRn_BLS (1U) //!< Bit field size in bits for FB_CSCRn_BLS. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSCRn_BLS field. #define BR_FB_CSCRn_BLS(n) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(n), BP_FB_CSCRn_BLS)) #endif //! @brief Format value for bitfield FB_CSCRn_BLS. #define BF_FB_CSCRn_BLS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSCRn_BLS), uint32_t) & BM_FB_CSCRn_BLS) #ifndef __LANGUAGE_ASM__ //! @brief Set the BLS field to a new value. #define BW_FB_CSCRn_BLS(n, v) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(n), BP_FB_CSCRn_BLS) = (v)) #endif //@} /*! * @name Register FB_CSCRn, field WS[15:10] (RW) * * Specifies the number of wait states inserted after FlexBus asserts the * associated chip-select and before an internal transfer acknowledge is generated (WS * = 00h inserts 0 wait states, ..., WS = 3Fh inserts 63 wait states). */ //@{ #define BP_FB_CSCRn_WS (10U) //!< Bit position for FB_CSCRn_WS. #define BM_FB_CSCRn_WS (0x0000FC00U) //!< Bit mask for FB_CSCRn_WS. #define BS_FB_CSCRn_WS (6U) //!< Bit field size in bits for FB_CSCRn_WS. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSCRn_WS field. #define BR_FB_CSCRn_WS(n) (HW_FB_CSCRn(n).B.WS) #endif //! @brief Format value for bitfield FB_CSCRn_WS. #define BF_FB_CSCRn_WS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSCRn_WS), uint32_t) & BM_FB_CSCRn_WS) #ifndef __LANGUAGE_ASM__ //! @brief Set the WS field to a new value. #define BW_FB_CSCRn_WS(n, v) (HW_FB_CSCRn_WR(n, (HW_FB_CSCRn_RD(n) & ~BM_FB_CSCRn_WS) | BF_FB_CSCRn_WS(v))) #endif //@} /*! * @name Register FB_CSCRn, field WRAH[17:16] (RW) * * Controls the address, data, and attribute hold time after the termination of * a write cycle that hits in the associated chip-select's address space. The * hold time applies only at the end of a transfer. Therefore, during a burst * transfer or a transfer to a port size smaller than the transfer size, the hold time * is only added after the last bus cycle. * * Values: * - 00 - 1 cycle (default for all but FB_CS0 ) * - 01 - 2 cycles * - 10 - 3 cycles * - 11 - 4 cycles (default for FB_CS0 ) */ //@{ #define BP_FB_CSCRn_WRAH (16U) //!< Bit position for FB_CSCRn_WRAH. #define BM_FB_CSCRn_WRAH (0x00030000U) //!< Bit mask for FB_CSCRn_WRAH. #define BS_FB_CSCRn_WRAH (2U) //!< Bit field size in bits for FB_CSCRn_WRAH. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSCRn_WRAH field. #define BR_FB_CSCRn_WRAH(n) (HW_FB_CSCRn(n).B.WRAH) #endif //! @brief Format value for bitfield FB_CSCRn_WRAH. #define BF_FB_CSCRn_WRAH(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSCRn_WRAH), uint32_t) & BM_FB_CSCRn_WRAH) #ifndef __LANGUAGE_ASM__ //! @brief Set the WRAH field to a new value. #define BW_FB_CSCRn_WRAH(n, v) (HW_FB_CSCRn_WR(n, (HW_FB_CSCRn_RD(n) & ~BM_FB_CSCRn_WRAH) | BF_FB_CSCRn_WRAH(v))) #endif //@} /*! * @name Register FB_CSCRn, field RDAH[19:18] (RW) * * Controls the address and attribute hold time after the termination during a * read cycle that hits in the associated chip-select's address space. The hold * time applies only at the end of a transfer. Therefore, during a burst transfer * or a transfer to a port size smaller than the transfer size, the hold time is * only added after the last bus cycle. The number of cycles the address and * attributes are held after FB_CSn deassertion depends on the value of the AA bit. * * Values: * - 00 - When AA is 0b, 1 cycle. When AA is 1b, 0 cycles. * - 01 - When AA is 0b, 2 cycles. When AA is 1b, 1 cycle. * - 10 - When AA is 0b, 3 cycles. When AA is 1b, 2 cycles. * - 11 - When AA is 0b, 4 cycles. When AA is 1b, 3 cycles. */ //@{ #define BP_FB_CSCRn_RDAH (18U) //!< Bit position for FB_CSCRn_RDAH. #define BM_FB_CSCRn_RDAH (0x000C0000U) //!< Bit mask for FB_CSCRn_RDAH. #define BS_FB_CSCRn_RDAH (2U) //!< Bit field size in bits for FB_CSCRn_RDAH. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSCRn_RDAH field. #define BR_FB_CSCRn_RDAH(n) (HW_FB_CSCRn(n).B.RDAH) #endif //! @brief Format value for bitfield FB_CSCRn_RDAH. #define BF_FB_CSCRn_RDAH(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSCRn_RDAH), uint32_t) & BM_FB_CSCRn_RDAH) #ifndef __LANGUAGE_ASM__ //! @brief Set the RDAH field to a new value. #define BW_FB_CSCRn_RDAH(n, v) (HW_FB_CSCRn_WR(n, (HW_FB_CSCRn_RD(n) & ~BM_FB_CSCRn_RDAH) | BF_FB_CSCRn_RDAH(v))) #endif //@} /*! * @name Register FB_CSCRn, field ASET[21:20] (RW) * * Controls when the chip-select is asserted with respect to assertion of a * valid address and attributes. * * Values: * - 00 - Assert FB_CSn on the first rising clock edge after the address is * asserted (default for all but FB_CS0 ). * - 01 - Assert FB_CSn on the second rising clock edge after the address is * asserted. * - 10 - Assert FB_CSn on the third rising clock edge after the address is * asserted. * - 11 - Assert FB_CSn on the fourth rising clock edge after the address is * asserted (default for FB_CS0 ). */ //@{ #define BP_FB_CSCRn_ASET (20U) //!< Bit position for FB_CSCRn_ASET. #define BM_FB_CSCRn_ASET (0x00300000U) //!< Bit mask for FB_CSCRn_ASET. #define BS_FB_CSCRn_ASET (2U) //!< Bit field size in bits for FB_CSCRn_ASET. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSCRn_ASET field. #define BR_FB_CSCRn_ASET(n) (HW_FB_CSCRn(n).B.ASET) #endif //! @brief Format value for bitfield FB_CSCRn_ASET. #define BF_FB_CSCRn_ASET(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSCRn_ASET), uint32_t) & BM_FB_CSCRn_ASET) #ifndef __LANGUAGE_ASM__ //! @brief Set the ASET field to a new value. #define BW_FB_CSCRn_ASET(n, v) (HW_FB_CSCRn_WR(n, (HW_FB_CSCRn_RD(n) & ~BM_FB_CSCRn_ASET) | BF_FB_CSCRn_ASET(v))) #endif //@} /*! * @name Register FB_CSCRn, field EXTS[22] (RW) * * Extended Transfer Start/Extended Address Latch Enable Controls how long FB_TS * /FB_ALE is asserted. * * Values: * - 0 - Disabled. FB_TS /FB_ALE asserts for one bus clock cycle. * - 1 - Enabled. FB_TS /FB_ALE remains asserted until the first positive clock * edge after FB_CSn asserts. */ //@{ #define BP_FB_CSCRn_EXTS (22U) //!< Bit position for FB_CSCRn_EXTS. #define BM_FB_CSCRn_EXTS (0x00400000U) //!< Bit mask for FB_CSCRn_EXTS. #define BS_FB_CSCRn_EXTS (1U) //!< Bit field size in bits for FB_CSCRn_EXTS. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSCRn_EXTS field. #define BR_FB_CSCRn_EXTS(n) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(n), BP_FB_CSCRn_EXTS)) #endif //! @brief Format value for bitfield FB_CSCRn_EXTS. #define BF_FB_CSCRn_EXTS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSCRn_EXTS), uint32_t) & BM_FB_CSCRn_EXTS) #ifndef __LANGUAGE_ASM__ //! @brief Set the EXTS field to a new value. #define BW_FB_CSCRn_EXTS(n, v) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(n), BP_FB_CSCRn_EXTS) = (v)) #endif //@} /*! * @name Register FB_CSCRn, field SWSEN[23] (RW) * * Values: * - 0 - Disabled. A number of wait states (specified by WS) are inserted before * an internal transfer acknowledge is generated for all transfers. * - 1 - Enabled. A number of wait states (specified by SWS) are inserted before * an internal transfer acknowledge is generated for burst transfer * secondary terminations. */ //@{ #define BP_FB_CSCRn_SWSEN (23U) //!< Bit position for FB_CSCRn_SWSEN. #define BM_FB_CSCRn_SWSEN (0x00800000U) //!< Bit mask for FB_CSCRn_SWSEN. #define BS_FB_CSCRn_SWSEN (1U) //!< Bit field size in bits for FB_CSCRn_SWSEN. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSCRn_SWSEN field. #define BR_FB_CSCRn_SWSEN(n) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(n), BP_FB_CSCRn_SWSEN)) #endif //! @brief Format value for bitfield FB_CSCRn_SWSEN. #define BF_FB_CSCRn_SWSEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSCRn_SWSEN), uint32_t) & BM_FB_CSCRn_SWSEN) #ifndef __LANGUAGE_ASM__ //! @brief Set the SWSEN field to a new value. #define BW_FB_CSCRn_SWSEN(n, v) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(n), BP_FB_CSCRn_SWSEN) = (v)) #endif //@} /*! * @name Register FB_CSCRn, field SWS[31:26] (RW) * * Used only when the SWSEN bit is 1b. Specifies the number of wait states * inserted before an internal transfer acknowledge is generated for a burst transfer * (except for the first termination, which is controlled by WS). */ //@{ #define BP_FB_CSCRn_SWS (26U) //!< Bit position for FB_CSCRn_SWS. #define BM_FB_CSCRn_SWS (0xFC000000U) //!< Bit mask for FB_CSCRn_SWS. #define BS_FB_CSCRn_SWS (6U) //!< Bit field size in bits for FB_CSCRn_SWS. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSCRn_SWS field. #define BR_FB_CSCRn_SWS(n) (HW_FB_CSCRn(n).B.SWS) #endif //! @brief Format value for bitfield FB_CSCRn_SWS. #define BF_FB_CSCRn_SWS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSCRn_SWS), uint32_t) & BM_FB_CSCRn_SWS) #ifndef __LANGUAGE_ASM__ //! @brief Set the SWS field to a new value. #define BW_FB_CSCRn_SWS(n, v) (HW_FB_CSCRn_WR(n, (HW_FB_CSCRn_RD(n) & ~BM_FB_CSCRn_SWS) | BF_FB_CSCRn_SWS(v))) #endif //@} //------------------------------------------------------------------------------------------- // HW_FB_CSPMCR - Chip Select port Multiplexing Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_FB_CSPMCR - Chip Select port Multiplexing Control Register (RW) * * Reset value: 0x00000000U * * Controls the multiplexing of the FlexBus signals. A bus error occurs when you * do any of the following: Write to a reserved address Write to a reserved * field in this register, or Access this register using a size other than 32 bits. */ typedef union _hw_fb_cspmcr { uint32_t U; struct _hw_fb_cspmcr_bitfields { uint32_t RESERVED0 : 12; //!< [11:0] uint32_t GROUP5 : 4; //!< [15:12] FlexBus Signal Group 5 Multiplex //! control uint32_t GROUP4 : 4; //!< [19:16] FlexBus Signal Group 4 Multiplex //! control uint32_t GROUP3 : 4; //!< [23:20] FlexBus Signal Group 3 Multiplex //! control uint32_t GROUP2 : 4; //!< [27:24] FlexBus Signal Group 2 Multiplex //! control uint32_t GROUP1 : 4; //!< [31:28] FlexBus Signal Group 1 Multiplex //! control } B; } hw_fb_cspmcr_t; #endif /*! * @name Constants and macros for entire FB_CSPMCR register */ //@{ #define HW_FB_CSPMCR_ADDR (REGS_FB_BASE + 0x60U) #ifndef __LANGUAGE_ASM__ #define HW_FB_CSPMCR (*(__IO hw_fb_cspmcr_t *) HW_FB_CSPMCR_ADDR) #define HW_FB_CSPMCR_RD() (HW_FB_CSPMCR.U) #define HW_FB_CSPMCR_WR(v) (HW_FB_CSPMCR.U = (v)) #define HW_FB_CSPMCR_SET(v) (HW_FB_CSPMCR_WR(HW_FB_CSPMCR_RD() | (v))) #define HW_FB_CSPMCR_CLR(v) (HW_FB_CSPMCR_WR(HW_FB_CSPMCR_RD() & ~(v))) #define HW_FB_CSPMCR_TOG(v) (HW_FB_CSPMCR_WR(HW_FB_CSPMCR_RD() ^ (v))) #endif //@} /* * Constants & macros for individual FB_CSPMCR bitfields */ /*! * @name Register FB_CSPMCR, field GROUP5[15:12] (RW) * * Controls the multiplexing of the FB_TA , FB_CS3 , and FB_BE_7_0 signals. When * GROUP5 is not 0000b, you must write 1b to the CSCR[AA] bit. Otherwise, the * bus hangs during a transfer. * * Values: * - 0000 - FB_TA * - 0001 - FB_CS3 . You must also write 1b to CSCR[AA]. * - 0010 - FB_BE_7_0 . You must also write 1b to CSCR[AA]. */ //@{ #define BP_FB_CSPMCR_GROUP5 (12U) //!< Bit position for FB_CSPMCR_GROUP5. #define BM_FB_CSPMCR_GROUP5 (0x0000F000U) //!< Bit mask for FB_CSPMCR_GROUP5. #define BS_FB_CSPMCR_GROUP5 (4U) //!< Bit field size in bits for FB_CSPMCR_GROUP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSPMCR_GROUP5 field. #define BR_FB_CSPMCR_GROUP5 (HW_FB_CSPMCR.B.GROUP5) #endif //! @brief Format value for bitfield FB_CSPMCR_GROUP5. #define BF_FB_CSPMCR_GROUP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSPMCR_GROUP5), uint32_t) & BM_FB_CSPMCR_GROUP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the GROUP5 field to a new value. #define BW_FB_CSPMCR_GROUP5(v) (HW_FB_CSPMCR_WR((HW_FB_CSPMCR_RD() & ~BM_FB_CSPMCR_GROUP5) | BF_FB_CSPMCR_GROUP5(v))) #endif //@} /*! * @name Register FB_CSPMCR, field GROUP4[19:16] (RW) * * Controls the multiplexing of the FB_TBST , FB_CS2 , and FB_BE_15_8 signals. * * Values: * - 0000 - FB_TBST * - 0001 - FB_CS2 * - 0010 - FB_BE_15_8 */ //@{ #define BP_FB_CSPMCR_GROUP4 (16U) //!< Bit position for FB_CSPMCR_GROUP4. #define BM_FB_CSPMCR_GROUP4 (0x000F0000U) //!< Bit mask for FB_CSPMCR_GROUP4. #define BS_FB_CSPMCR_GROUP4 (4U) //!< Bit field size in bits for FB_CSPMCR_GROUP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSPMCR_GROUP4 field. #define BR_FB_CSPMCR_GROUP4 (HW_FB_CSPMCR.B.GROUP4) #endif //! @brief Format value for bitfield FB_CSPMCR_GROUP4. #define BF_FB_CSPMCR_GROUP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSPMCR_GROUP4), uint32_t) & BM_FB_CSPMCR_GROUP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the GROUP4 field to a new value. #define BW_FB_CSPMCR_GROUP4(v) (HW_FB_CSPMCR_WR((HW_FB_CSPMCR_RD() & ~BM_FB_CSPMCR_GROUP4) | BF_FB_CSPMCR_GROUP4(v))) #endif //@} /*! * @name Register FB_CSPMCR, field GROUP3[23:20] (RW) * * Controls the multiplexing of the FB_CS5 , FB_TSIZ1, and FB_BE_23_16 signals. * * Values: * - 0000 - FB_CS5 * - 0001 - FB_TSIZ1 * - 0010 - FB_BE_23_16 */ //@{ #define BP_FB_CSPMCR_GROUP3 (20U) //!< Bit position for FB_CSPMCR_GROUP3. #define BM_FB_CSPMCR_GROUP3 (0x00F00000U) //!< Bit mask for FB_CSPMCR_GROUP3. #define BS_FB_CSPMCR_GROUP3 (4U) //!< Bit field size in bits for FB_CSPMCR_GROUP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSPMCR_GROUP3 field. #define BR_FB_CSPMCR_GROUP3 (HW_FB_CSPMCR.B.GROUP3) #endif //! @brief Format value for bitfield FB_CSPMCR_GROUP3. #define BF_FB_CSPMCR_GROUP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSPMCR_GROUP3), uint32_t) & BM_FB_CSPMCR_GROUP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the GROUP3 field to a new value. #define BW_FB_CSPMCR_GROUP3(v) (HW_FB_CSPMCR_WR((HW_FB_CSPMCR_RD() & ~BM_FB_CSPMCR_GROUP3) | BF_FB_CSPMCR_GROUP3(v))) #endif //@} /*! * @name Register FB_CSPMCR, field GROUP2[27:24] (RW) * * Controls the multiplexing of the FB_CS4 , FB_TSIZ0, and FB_BE_31_24 signals. * * Values: * - 0000 - FB_CS4 * - 0001 - FB_TSIZ0 * - 0010 - FB_BE_31_24 */ //@{ #define BP_FB_CSPMCR_GROUP2 (24U) //!< Bit position for FB_CSPMCR_GROUP2. #define BM_FB_CSPMCR_GROUP2 (0x0F000000U) //!< Bit mask for FB_CSPMCR_GROUP2. #define BS_FB_CSPMCR_GROUP2 (4U) //!< Bit field size in bits for FB_CSPMCR_GROUP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSPMCR_GROUP2 field. #define BR_FB_CSPMCR_GROUP2 (HW_FB_CSPMCR.B.GROUP2) #endif //! @brief Format value for bitfield FB_CSPMCR_GROUP2. #define BF_FB_CSPMCR_GROUP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSPMCR_GROUP2), uint32_t) & BM_FB_CSPMCR_GROUP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the GROUP2 field to a new value. #define BW_FB_CSPMCR_GROUP2(v) (HW_FB_CSPMCR_WR((HW_FB_CSPMCR_RD() & ~BM_FB_CSPMCR_GROUP2) | BF_FB_CSPMCR_GROUP2(v))) #endif //@} /*! * @name Register FB_CSPMCR, field GROUP1[31:28] (RW) * * Controls the multiplexing of the FB_ALE, FB_CS1 , and FB_TS signals. * * Values: * - 0000 - FB_ALE * - 0001 - FB_CS1 * - 0010 - FB_TS */ //@{ #define BP_FB_CSPMCR_GROUP1 (28U) //!< Bit position for FB_CSPMCR_GROUP1. #define BM_FB_CSPMCR_GROUP1 (0xF0000000U) //!< Bit mask for FB_CSPMCR_GROUP1. #define BS_FB_CSPMCR_GROUP1 (4U) //!< Bit field size in bits for FB_CSPMCR_GROUP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the FB_CSPMCR_GROUP1 field. #define BR_FB_CSPMCR_GROUP1 (HW_FB_CSPMCR.B.GROUP1) #endif //! @brief Format value for bitfield FB_CSPMCR_GROUP1. #define BF_FB_CSPMCR_GROUP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FB_CSPMCR_GROUP1), uint32_t) & BM_FB_CSPMCR_GROUP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the GROUP1 field to a new value. #define BW_FB_CSPMCR_GROUP1(v) (HW_FB_CSPMCR_WR((HW_FB_CSPMCR_RD() & ~BM_FB_CSPMCR_GROUP1) | BF_FB_CSPMCR_GROUP1(v))) #endif //@} //------------------------------------------------------------------------------------------- // hw_fb_t - module struct //------------------------------------------------------------------------------------------- /*! * @brief All FB module registers. */ #ifndef __LANGUAGE_ASM__ #pragma pack(1) typedef struct _hw_fb { struct { __IO hw_fb_csarn_t CSARn; //!< [0x0] Chip Select Address Register __IO hw_fb_csmrn_t CSMRn; //!< [0x4] Chip Select Mask Register __IO hw_fb_cscrn_t CSCRn; //!< [0x8] Chip Select Control Register } CS[6]; uint8_t _reserved0[24]; __IO hw_fb_cspmcr_t CSPMCR; //!< [0x60] Chip Select port Multiplexing Control Register } hw_fb_t; #pragma pack() //! @brief Macro to access all FB registers. //! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, //! use the '&' operator, like <code>&HW_FB</code>. #define HW_FB (*(hw_fb_t *) REGS_FB_BASE) #endif #endif // __HW_FB_REGISTERS_H__ // v22/130726/0.9 // EOF