mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_rtc.h
- Committer:
- mbed_official
- Date:
- 2014-04-03
- Revision:
- 149:1fb5f62b92bd
- Parent:
- targets/hal/TARGET_Freescale/TARGET_KSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_rtc.h@ 146:f64d43ff0c18
File content as of revision 149:1fb5f62b92bd:
/* * Copyright (c) 2014, Freescale Semiconductor, Inc. * All rights reserved. * * THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. */ /* * WARNING! DO NOT EDIT THIS FILE DIRECTLY! * * This file was generated automatically and any changes may be lost. */ #ifndef __HW_RTC_REGISTERS_H__ #define __HW_RTC_REGISTERS_H__ #include "regs.h" /* * MK64F12 RTC * * Secure Real Time Clock * * Registers defined in this header file: * - HW_RTC_TSR - RTC Time Seconds Register * - HW_RTC_TPR - RTC Time Prescaler Register * - HW_RTC_TAR - RTC Time Alarm Register * - HW_RTC_TCR - RTC Time Compensation Register * - HW_RTC_CR - RTC Control Register * - HW_RTC_SR - RTC Status Register * - HW_RTC_LR - RTC Lock Register * - HW_RTC_IER - RTC Interrupt Enable Register * - HW_RTC_WAR - RTC Write Access Register * - HW_RTC_RAR - RTC Read Access Register * * - hw_rtc_t - Struct containing all module registers. */ //! @name Module base addresses //@{ #ifndef REGS_RTC_BASE #define HW_RTC_INSTANCE_COUNT (1U) //!< Number of instances of the RTC module. #define REGS_RTC_BASE (0x4003D000U) //!< Base address for RTC. #endif //@} //------------------------------------------------------------------------------------------- // HW_RTC_TSR - RTC Time Seconds Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_RTC_TSR - RTC Time Seconds Register (RW) * * Reset value: 0x00000000U */ typedef union _hw_rtc_tsr { uint32_t U; struct _hw_rtc_tsr_bitfields { uint32_t TSR : 32; //!< [31:0] Time Seconds Register } B; } hw_rtc_tsr_t; #endif /*! * @name Constants and macros for entire RTC_TSR register */ //@{ #define HW_RTC_TSR_ADDR (REGS_RTC_BASE + 0x0U) #ifndef __LANGUAGE_ASM__ #define HW_RTC_TSR (*(__IO hw_rtc_tsr_t *) HW_RTC_TSR_ADDR) #define HW_RTC_TSR_RD() (HW_RTC_TSR.U) #define HW_RTC_TSR_WR(v) (HW_RTC_TSR.U = (v)) #define HW_RTC_TSR_SET(v) (HW_RTC_TSR_WR(HW_RTC_TSR_RD() | (v))) #define HW_RTC_TSR_CLR(v) (HW_RTC_TSR_WR(HW_RTC_TSR_RD() & ~(v))) #define HW_RTC_TSR_TOG(v) (HW_RTC_TSR_WR(HW_RTC_TSR_RD() ^ (v))) #endif //@} /* * Constants & macros for individual RTC_TSR bitfields */ /*! * @name Register RTC_TSR, field TSR[31:0] (RW) * * When the time counter is enabled, the TSR is read only and increments once a * second provided SR[TOF] or SR[TIF] are not set. The time counter will read as * zero when SR[TOF] or SR[TIF] are set. When the time counter is disabled, the * TSR can be read or written. Writing to the TSR when the time counter is * disabled will clear the SR[TOF] and/or the SR[TIF]. Writing to TSR with zero is * supported, but not recommended because TSR will read as zero when SR[TIF] or * SR[TOF] are set (indicating the time is invalid). */ //@{ #define BP_RTC_TSR_TSR (0U) //!< Bit position for RTC_TSR_TSR. #define BM_RTC_TSR_TSR (0xFFFFFFFFU) //!< Bit mask for RTC_TSR_TSR. #define BS_RTC_TSR_TSR (32U) //!< Bit field size in bits for RTC_TSR_TSR. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_TSR_TSR field. #define BR_RTC_TSR_TSR (HW_RTC_TSR.U) #endif //! @brief Format value for bitfield RTC_TSR_TSR. #define BF_RTC_TSR_TSR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_TSR_TSR), uint32_t) & BM_RTC_TSR_TSR) #ifndef __LANGUAGE_ASM__ //! @brief Set the TSR field to a new value. #define BW_RTC_TSR_TSR(v) (HW_RTC_TSR_WR(v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_RTC_TPR - RTC Time Prescaler Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_RTC_TPR - RTC Time Prescaler Register (RW) * * Reset value: 0x00000000U */ typedef union _hw_rtc_tpr { uint32_t U; struct _hw_rtc_tpr_bitfields { uint32_t TPR : 16; //!< [15:0] Time Prescaler Register uint32_t RESERVED0 : 16; //!< [31:16] } B; } hw_rtc_tpr_t; #endif /*! * @name Constants and macros for entire RTC_TPR register */ //@{ #define HW_RTC_TPR_ADDR (REGS_RTC_BASE + 0x4U) #ifndef __LANGUAGE_ASM__ #define HW_RTC_TPR (*(__IO hw_rtc_tpr_t *) HW_RTC_TPR_ADDR) #define HW_RTC_TPR_RD() (HW_RTC_TPR.U) #define HW_RTC_TPR_WR(v) (HW_RTC_TPR.U = (v)) #define HW_RTC_TPR_SET(v) (HW_RTC_TPR_WR(HW_RTC_TPR_RD() | (v))) #define HW_RTC_TPR_CLR(v) (HW_RTC_TPR_WR(HW_RTC_TPR_RD() & ~(v))) #define HW_RTC_TPR_TOG(v) (HW_RTC_TPR_WR(HW_RTC_TPR_RD() ^ (v))) #endif //@} /* * Constants & macros for individual RTC_TPR bitfields */ /*! * @name Register RTC_TPR, field TPR[15:0] (RW) * * When the time counter is enabled, the TPR is read only and increments every * 32.768 kHz clock cycle. The time counter will read as zero when SR[TOF] or * SR[TIF] are set. When the time counter is disabled, the TPR can be read or * written. The TSR[TSR] increments when bit 14 of the TPR transitions from a logic one * to a logic zero. */ //@{ #define BP_RTC_TPR_TPR (0U) //!< Bit position for RTC_TPR_TPR. #define BM_RTC_TPR_TPR (0x0000FFFFU) //!< Bit mask for RTC_TPR_TPR. #define BS_RTC_TPR_TPR (16U) //!< Bit field size in bits for RTC_TPR_TPR. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_TPR_TPR field. #define BR_RTC_TPR_TPR (HW_RTC_TPR.B.TPR) #endif //! @brief Format value for bitfield RTC_TPR_TPR. #define BF_RTC_TPR_TPR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_TPR_TPR), uint32_t) & BM_RTC_TPR_TPR) #ifndef __LANGUAGE_ASM__ //! @brief Set the TPR field to a new value. #define BW_RTC_TPR_TPR(v) (HW_RTC_TPR_WR((HW_RTC_TPR_RD() & ~BM_RTC_TPR_TPR) | BF_RTC_TPR_TPR(v))) #endif //@} //------------------------------------------------------------------------------------------- // HW_RTC_TAR - RTC Time Alarm Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_RTC_TAR - RTC Time Alarm Register (RW) * * Reset value: 0x00000000U */ typedef union _hw_rtc_tar { uint32_t U; struct _hw_rtc_tar_bitfields { uint32_t TAR : 32; //!< [31:0] Time Alarm Register } B; } hw_rtc_tar_t; #endif /*! * @name Constants and macros for entire RTC_TAR register */ //@{ #define HW_RTC_TAR_ADDR (REGS_RTC_BASE + 0x8U) #ifndef __LANGUAGE_ASM__ #define HW_RTC_TAR (*(__IO hw_rtc_tar_t *) HW_RTC_TAR_ADDR) #define HW_RTC_TAR_RD() (HW_RTC_TAR.U) #define HW_RTC_TAR_WR(v) (HW_RTC_TAR.U = (v)) #define HW_RTC_TAR_SET(v) (HW_RTC_TAR_WR(HW_RTC_TAR_RD() | (v))) #define HW_RTC_TAR_CLR(v) (HW_RTC_TAR_WR(HW_RTC_TAR_RD() & ~(v))) #define HW_RTC_TAR_TOG(v) (HW_RTC_TAR_WR(HW_RTC_TAR_RD() ^ (v))) #endif //@} /* * Constants & macros for individual RTC_TAR bitfields */ /*! * @name Register RTC_TAR, field TAR[31:0] (RW) * * When the time counter is enabled, the SR[TAF] is set whenever the TAR[TAR] * equals the TSR[TSR] and the TSR[TSR] increments. Writing to the TAR clears the * SR[TAF]. */ //@{ #define BP_RTC_TAR_TAR (0U) //!< Bit position for RTC_TAR_TAR. #define BM_RTC_TAR_TAR (0xFFFFFFFFU) //!< Bit mask for RTC_TAR_TAR. #define BS_RTC_TAR_TAR (32U) //!< Bit field size in bits for RTC_TAR_TAR. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_TAR_TAR field. #define BR_RTC_TAR_TAR (HW_RTC_TAR.U) #endif //! @brief Format value for bitfield RTC_TAR_TAR. #define BF_RTC_TAR_TAR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_TAR_TAR), uint32_t) & BM_RTC_TAR_TAR) #ifndef __LANGUAGE_ASM__ //! @brief Set the TAR field to a new value. #define BW_RTC_TAR_TAR(v) (HW_RTC_TAR_WR(v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_RTC_TCR - RTC Time Compensation Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_RTC_TCR - RTC Time Compensation Register (RW) * * Reset value: 0x00000000U */ typedef union _hw_rtc_tcr { uint32_t U; struct _hw_rtc_tcr_bitfields { uint32_t TCR : 8; //!< [7:0] Time Compensation Register uint32_t CIR : 8; //!< [15:8] Compensation Interval Register uint32_t TCV : 8; //!< [23:16] Time Compensation Value uint32_t CIC : 8; //!< [31:24] Compensation Interval Counter } B; } hw_rtc_tcr_t; #endif /*! * @name Constants and macros for entire RTC_TCR register */ //@{ #define HW_RTC_TCR_ADDR (REGS_RTC_BASE + 0xCU) #ifndef __LANGUAGE_ASM__ #define HW_RTC_TCR (*(__IO hw_rtc_tcr_t *) HW_RTC_TCR_ADDR) #define HW_RTC_TCR_RD() (HW_RTC_TCR.U) #define HW_RTC_TCR_WR(v) (HW_RTC_TCR.U = (v)) #define HW_RTC_TCR_SET(v) (HW_RTC_TCR_WR(HW_RTC_TCR_RD() | (v))) #define HW_RTC_TCR_CLR(v) (HW_RTC_TCR_WR(HW_RTC_TCR_RD() & ~(v))) #define HW_RTC_TCR_TOG(v) (HW_RTC_TCR_WR(HW_RTC_TCR_RD() ^ (v))) #endif //@} /* * Constants & macros for individual RTC_TCR bitfields */ /*! * @name Register RTC_TCR, field TCR[7:0] (RW) * * Configures the number of 32.768 kHz clock cycles in each second. This * register is double buffered and writes do not take affect until the end of the * current compensation interval. * * Values: * - 10000000 - Time Prescaler Register overflows every 32896 clock cycles. * - 11111111 - Time Prescaler Register overflows every 32769 clock cycles. * - 0 - Time Prescaler Register overflows every 32768 clock cycles. * - 1 - Time Prescaler Register overflows every 32767 clock cycles. * - 1111111 - Time Prescaler Register overflows every 32641 clock cycles. */ //@{ #define BP_RTC_TCR_TCR (0U) //!< Bit position for RTC_TCR_TCR. #define BM_RTC_TCR_TCR (0x000000FFU) //!< Bit mask for RTC_TCR_TCR. #define BS_RTC_TCR_TCR (8U) //!< Bit field size in bits for RTC_TCR_TCR. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_TCR_TCR field. #define BR_RTC_TCR_TCR (HW_RTC_TCR.B.TCR) #endif //! @brief Format value for bitfield RTC_TCR_TCR. #define BF_RTC_TCR_TCR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_TCR_TCR), uint32_t) & BM_RTC_TCR_TCR) #ifndef __LANGUAGE_ASM__ //! @brief Set the TCR field to a new value. #define BW_RTC_TCR_TCR(v) (HW_RTC_TCR_WR((HW_RTC_TCR_RD() & ~BM_RTC_TCR_TCR) | BF_RTC_TCR_TCR(v))) #endif //@} /*! * @name Register RTC_TCR, field CIR[15:8] (RW) * * Configures the compensation interval in seconds from 1 to 256 to control how * frequently the TCR should adjust the number of 32.768 kHz cycles in each * second. The value written should be one less than the number of seconds. For * example, write zero to configure for a compensation interval of one second. This * register is double buffered and writes do not take affect until the end of the * current compensation interval. */ //@{ #define BP_RTC_TCR_CIR (8U) //!< Bit position for RTC_TCR_CIR. #define BM_RTC_TCR_CIR (0x0000FF00U) //!< Bit mask for RTC_TCR_CIR. #define BS_RTC_TCR_CIR (8U) //!< Bit field size in bits for RTC_TCR_CIR. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_TCR_CIR field. #define BR_RTC_TCR_CIR (HW_RTC_TCR.B.CIR) #endif //! @brief Format value for bitfield RTC_TCR_CIR. #define BF_RTC_TCR_CIR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_TCR_CIR), uint32_t) & BM_RTC_TCR_CIR) #ifndef __LANGUAGE_ASM__ //! @brief Set the CIR field to a new value. #define BW_RTC_TCR_CIR(v) (HW_RTC_TCR_WR((HW_RTC_TCR_RD() & ~BM_RTC_TCR_CIR) | BF_RTC_TCR_CIR(v))) #endif //@} /*! * @name Register RTC_TCR, field TCV[23:16] (RO) * * Current value used by the compensation logic for the present second interval. * Updated once a second if the CIC equals 0 with the contents of the TCR field. * If the CIC does not equal zero then it is loaded with zero (compensation is * not enabled for that second increment). */ //@{ #define BP_RTC_TCR_TCV (16U) //!< Bit position for RTC_TCR_TCV. #define BM_RTC_TCR_TCV (0x00FF0000U) //!< Bit mask for RTC_TCR_TCV. #define BS_RTC_TCR_TCV (8U) //!< Bit field size in bits for RTC_TCR_TCV. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_TCR_TCV field. #define BR_RTC_TCR_TCV (HW_RTC_TCR.B.TCV) #endif //@} /*! * @name Register RTC_TCR, field CIC[31:24] (RO) * * Current value of the compensation interval counter. If the compensation * interval counter equals zero then it is loaded with the contents of the CIR. If the * CIC does not equal zero then it is decremented once a second. */ //@{ #define BP_RTC_TCR_CIC (24U) //!< Bit position for RTC_TCR_CIC. #define BM_RTC_TCR_CIC (0xFF000000U) //!< Bit mask for RTC_TCR_CIC. #define BS_RTC_TCR_CIC (8U) //!< Bit field size in bits for RTC_TCR_CIC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_TCR_CIC field. #define BR_RTC_TCR_CIC (HW_RTC_TCR.B.CIC) #endif //@} //------------------------------------------------------------------------------------------- // HW_RTC_CR - RTC Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_RTC_CR - RTC Control Register (RW) * * Reset value: 0x00000000U */ typedef union _hw_rtc_cr { uint32_t U; struct _hw_rtc_cr_bitfields { uint32_t SWR : 1; //!< [0] Software Reset uint32_t WPE : 1; //!< [1] Wakeup Pin Enable uint32_t SUP : 1; //!< [2] Supervisor Access uint32_t UM : 1; //!< [3] Update Mode uint32_t WPS : 1; //!< [4] Wakeup Pin Select uint32_t RESERVED0 : 3; //!< [7:5] uint32_t OSCE : 1; //!< [8] Oscillator Enable uint32_t CLKO : 1; //!< [9] Clock Output uint32_t SC16P : 1; //!< [10] Oscillator 16pF Load Configure uint32_t SC8P : 1; //!< [11] Oscillator 8pF Load Configure uint32_t SC4P : 1; //!< [12] Oscillator 4pF Load Configure uint32_t SC2P : 1; //!< [13] Oscillator 2pF Load Configure uint32_t RESERVED1 : 18; //!< [31:14] } B; } hw_rtc_cr_t; #endif /*! * @name Constants and macros for entire RTC_CR register */ //@{ #define HW_RTC_CR_ADDR (REGS_RTC_BASE + 0x10U) #ifndef __LANGUAGE_ASM__ #define HW_RTC_CR (*(__IO hw_rtc_cr_t *) HW_RTC_CR_ADDR) #define HW_RTC_CR_RD() (HW_RTC_CR.U) #define HW_RTC_CR_WR(v) (HW_RTC_CR.U = (v)) #define HW_RTC_CR_SET(v) (HW_RTC_CR_WR(HW_RTC_CR_RD() | (v))) #define HW_RTC_CR_CLR(v) (HW_RTC_CR_WR(HW_RTC_CR_RD() & ~(v))) #define HW_RTC_CR_TOG(v) (HW_RTC_CR_WR(HW_RTC_CR_RD() ^ (v))) #endif //@} /* * Constants & macros for individual RTC_CR bitfields */ /*! * @name Register RTC_CR, field SWR[0] (RW) * * Values: * - 0 - No effect. * - 1 - Resets all RTC registers except for the SWR bit and the RTC_WAR and * RTC_RAR registers . The SWR bit is cleared by VBAT POR and by software * explicitly clearing it. */ //@{ #define BP_RTC_CR_SWR (0U) //!< Bit position for RTC_CR_SWR. #define BM_RTC_CR_SWR (0x00000001U) //!< Bit mask for RTC_CR_SWR. #define BS_RTC_CR_SWR (1U) //!< Bit field size in bits for RTC_CR_SWR. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_CR_SWR field. #define BR_RTC_CR_SWR (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_SWR)) #endif //! @brief Format value for bitfield RTC_CR_SWR. #define BF_RTC_CR_SWR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_CR_SWR), uint32_t) & BM_RTC_CR_SWR) #ifndef __LANGUAGE_ASM__ //! @brief Set the SWR field to a new value. #define BW_RTC_CR_SWR(v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_SWR) = (v)) #endif //@} /*! * @name Register RTC_CR, field WPE[1] (RW) * * The wakeup pin is optional and not available on all devices. * * Values: * - 0 - Wakeup pin is disabled. * - 1 - Wakeup pin is enabled and wakeup pin asserts if the RTC interrupt * asserts or the wakeup pin is turned on. */ //@{ #define BP_RTC_CR_WPE (1U) //!< Bit position for RTC_CR_WPE. #define BM_RTC_CR_WPE (0x00000002U) //!< Bit mask for RTC_CR_WPE. #define BS_RTC_CR_WPE (1U) //!< Bit field size in bits for RTC_CR_WPE. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_CR_WPE field. #define BR_RTC_CR_WPE (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_WPE)) #endif //! @brief Format value for bitfield RTC_CR_WPE. #define BF_RTC_CR_WPE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_CR_WPE), uint32_t) & BM_RTC_CR_WPE) #ifndef __LANGUAGE_ASM__ //! @brief Set the WPE field to a new value. #define BW_RTC_CR_WPE(v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_WPE) = (v)) #endif //@} /*! * @name Register RTC_CR, field SUP[2] (RW) * * Values: * - 0 - Non-supervisor mode write accesses are not supported and generate a bus * error. * - 1 - Non-supervisor mode write accesses are supported. */ //@{ #define BP_RTC_CR_SUP (2U) //!< Bit position for RTC_CR_SUP. #define BM_RTC_CR_SUP (0x00000004U) //!< Bit mask for RTC_CR_SUP. #define BS_RTC_CR_SUP (1U) //!< Bit field size in bits for RTC_CR_SUP. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_CR_SUP field. #define BR_RTC_CR_SUP (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_SUP)) #endif //! @brief Format value for bitfield RTC_CR_SUP. #define BF_RTC_CR_SUP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_CR_SUP), uint32_t) & BM_RTC_CR_SUP) #ifndef __LANGUAGE_ASM__ //! @brief Set the SUP field to a new value. #define BW_RTC_CR_SUP(v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_SUP) = (v)) #endif //@} /*! * @name Register RTC_CR, field UM[3] (RW) * * Allows SR[TCE] to be written even when the Status Register is locked. When * set, the SR[TCE] can always be written if the SR[TIF] or SR[TOF] are set or if * the SR[TCE] is clear. * * Values: * - 0 - Registers cannot be written when locked. * - 1 - Registers can be written when locked under limited conditions. */ //@{ #define BP_RTC_CR_UM (3U) //!< Bit position for RTC_CR_UM. #define BM_RTC_CR_UM (0x00000008U) //!< Bit mask for RTC_CR_UM. #define BS_RTC_CR_UM (1U) //!< Bit field size in bits for RTC_CR_UM. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_CR_UM field. #define BR_RTC_CR_UM (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_UM)) #endif //! @brief Format value for bitfield RTC_CR_UM. #define BF_RTC_CR_UM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_CR_UM), uint32_t) & BM_RTC_CR_UM) #ifndef __LANGUAGE_ASM__ //! @brief Set the UM field to a new value. #define BW_RTC_CR_UM(v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_UM) = (v)) #endif //@} /*! * @name Register RTC_CR, field WPS[4] (RW) * * The wakeup pin is optional and not available on all devices. * * Values: * - 0 - Wakeup pin asserts (active low, open drain) if the RTC interrupt * asserts or the wakeup pin is turned on. * - 1 - Wakeup pin instead outputs the RTC 32kHz clock, provided the wakeup pin * is turned on and the 32kHz clock is output to other peripherals. */ //@{ #define BP_RTC_CR_WPS (4U) //!< Bit position for RTC_CR_WPS. #define BM_RTC_CR_WPS (0x00000010U) //!< Bit mask for RTC_CR_WPS. #define BS_RTC_CR_WPS (1U) //!< Bit field size in bits for RTC_CR_WPS. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_CR_WPS field. #define BR_RTC_CR_WPS (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_WPS)) #endif //! @brief Format value for bitfield RTC_CR_WPS. #define BF_RTC_CR_WPS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_CR_WPS), uint32_t) & BM_RTC_CR_WPS) #ifndef __LANGUAGE_ASM__ //! @brief Set the WPS field to a new value. #define BW_RTC_CR_WPS(v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_WPS) = (v)) #endif //@} /*! * @name Register RTC_CR, field OSCE[8] (RW) * * Values: * - 0 - 32.768 kHz oscillator is disabled. * - 1 - 32.768 kHz oscillator is enabled. After setting this bit, wait the * oscillator startup time before enabling the time counter to allow the 32.768 * kHz clock time to stabilize. */ //@{ #define BP_RTC_CR_OSCE (8U) //!< Bit position for RTC_CR_OSCE. #define BM_RTC_CR_OSCE (0x00000100U) //!< Bit mask for RTC_CR_OSCE. #define BS_RTC_CR_OSCE (1U) //!< Bit field size in bits for RTC_CR_OSCE. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_CR_OSCE field. #define BR_RTC_CR_OSCE (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_OSCE)) #endif //! @brief Format value for bitfield RTC_CR_OSCE. #define BF_RTC_CR_OSCE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_CR_OSCE), uint32_t) & BM_RTC_CR_OSCE) #ifndef __LANGUAGE_ASM__ //! @brief Set the OSCE field to a new value. #define BW_RTC_CR_OSCE(v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_OSCE) = (v)) #endif //@} /*! * @name Register RTC_CR, field CLKO[9] (RW) * * Values: * - 0 - The 32 kHz clock is output to other peripherals. * - 1 - The 32 kHz clock is not output to other peripherals. */ //@{ #define BP_RTC_CR_CLKO (9U) //!< Bit position for RTC_CR_CLKO. #define BM_RTC_CR_CLKO (0x00000200U) //!< Bit mask for RTC_CR_CLKO. #define BS_RTC_CR_CLKO (1U) //!< Bit field size in bits for RTC_CR_CLKO. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_CR_CLKO field. #define BR_RTC_CR_CLKO (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_CLKO)) #endif //! @brief Format value for bitfield RTC_CR_CLKO. #define BF_RTC_CR_CLKO(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_CR_CLKO), uint32_t) & BM_RTC_CR_CLKO) #ifndef __LANGUAGE_ASM__ //! @brief Set the CLKO field to a new value. #define BW_RTC_CR_CLKO(v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_CLKO) = (v)) #endif //@} /*! * @name Register RTC_CR, field SC16P[10] (RW) * * Values: * - 0 - Disable the load. * - 1 - Enable the additional load. */ //@{ #define BP_RTC_CR_SC16P (10U) //!< Bit position for RTC_CR_SC16P. #define BM_RTC_CR_SC16P (0x00000400U) //!< Bit mask for RTC_CR_SC16P. #define BS_RTC_CR_SC16P (1U) //!< Bit field size in bits for RTC_CR_SC16P. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_CR_SC16P field. #define BR_RTC_CR_SC16P (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_SC16P)) #endif //! @brief Format value for bitfield RTC_CR_SC16P. #define BF_RTC_CR_SC16P(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_CR_SC16P), uint32_t) & BM_RTC_CR_SC16P) #ifndef __LANGUAGE_ASM__ //! @brief Set the SC16P field to a new value. #define BW_RTC_CR_SC16P(v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_SC16P) = (v)) #endif //@} /*! * @name Register RTC_CR, field SC8P[11] (RW) * * Values: * - 0 - Disable the load. * - 1 - Enable the additional load. */ //@{ #define BP_RTC_CR_SC8P (11U) //!< Bit position for RTC_CR_SC8P. #define BM_RTC_CR_SC8P (0x00000800U) //!< Bit mask for RTC_CR_SC8P. #define BS_RTC_CR_SC8P (1U) //!< Bit field size in bits for RTC_CR_SC8P. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_CR_SC8P field. #define BR_RTC_CR_SC8P (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_SC8P)) #endif //! @brief Format value for bitfield RTC_CR_SC8P. #define BF_RTC_CR_SC8P(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_CR_SC8P), uint32_t) & BM_RTC_CR_SC8P) #ifndef __LANGUAGE_ASM__ //! @brief Set the SC8P field to a new value. #define BW_RTC_CR_SC8P(v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_SC8P) = (v)) #endif //@} /*! * @name Register RTC_CR, field SC4P[12] (RW) * * Values: * - 0 - Disable the load. * - 1 - Enable the additional load. */ //@{ #define BP_RTC_CR_SC4P (12U) //!< Bit position for RTC_CR_SC4P. #define BM_RTC_CR_SC4P (0x00001000U) //!< Bit mask for RTC_CR_SC4P. #define BS_RTC_CR_SC4P (1U) //!< Bit field size in bits for RTC_CR_SC4P. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_CR_SC4P field. #define BR_RTC_CR_SC4P (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_SC4P)) #endif //! @brief Format value for bitfield RTC_CR_SC4P. #define BF_RTC_CR_SC4P(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_CR_SC4P), uint32_t) & BM_RTC_CR_SC4P) #ifndef __LANGUAGE_ASM__ //! @brief Set the SC4P field to a new value. #define BW_RTC_CR_SC4P(v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_SC4P) = (v)) #endif //@} /*! * @name Register RTC_CR, field SC2P[13] (RW) * * Values: * - 0 - Disable the load. * - 1 - Enable the additional load. */ //@{ #define BP_RTC_CR_SC2P (13U) //!< Bit position for RTC_CR_SC2P. #define BM_RTC_CR_SC2P (0x00002000U) //!< Bit mask for RTC_CR_SC2P. #define BS_RTC_CR_SC2P (1U) //!< Bit field size in bits for RTC_CR_SC2P. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_CR_SC2P field. #define BR_RTC_CR_SC2P (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_SC2P)) #endif //! @brief Format value for bitfield RTC_CR_SC2P. #define BF_RTC_CR_SC2P(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_CR_SC2P), uint32_t) & BM_RTC_CR_SC2P) #ifndef __LANGUAGE_ASM__ //! @brief Set the SC2P field to a new value. #define BW_RTC_CR_SC2P(v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR, BP_RTC_CR_SC2P) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_RTC_SR - RTC Status Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_RTC_SR - RTC Status Register (RW) * * Reset value: 0x00000001U */ typedef union _hw_rtc_sr { uint32_t U; struct _hw_rtc_sr_bitfields { uint32_t TIF : 1; //!< [0] Time Invalid Flag uint32_t TOF : 1; //!< [1] Time Overflow Flag uint32_t TAF : 1; //!< [2] Time Alarm Flag uint32_t RESERVED0 : 1; //!< [3] uint32_t TCE : 1; //!< [4] Time Counter Enable uint32_t RESERVED1 : 27; //!< [31:5] } B; } hw_rtc_sr_t; #endif /*! * @name Constants and macros for entire RTC_SR register */ //@{ #define HW_RTC_SR_ADDR (REGS_RTC_BASE + 0x14U) #ifndef __LANGUAGE_ASM__ #define HW_RTC_SR (*(__IO hw_rtc_sr_t *) HW_RTC_SR_ADDR) #define HW_RTC_SR_RD() (HW_RTC_SR.U) #define HW_RTC_SR_WR(v) (HW_RTC_SR.U = (v)) #define HW_RTC_SR_SET(v) (HW_RTC_SR_WR(HW_RTC_SR_RD() | (v))) #define HW_RTC_SR_CLR(v) (HW_RTC_SR_WR(HW_RTC_SR_RD() & ~(v))) #define HW_RTC_SR_TOG(v) (HW_RTC_SR_WR(HW_RTC_SR_RD() ^ (v))) #endif //@} /* * Constants & macros for individual RTC_SR bitfields */ /*! * @name Register RTC_SR, field TIF[0] (RO) * * The time invalid flag is set on VBAT POR or software reset. The TSR and TPR * do not increment and read as zero when this bit is set. This bit is cleared by * writing the TSR register when the time counter is disabled. * * Values: * - 0 - Time is valid. * - 1 - Time is invalid and time counter is read as zero. */ //@{ #define BP_RTC_SR_TIF (0U) //!< Bit position for RTC_SR_TIF. #define BM_RTC_SR_TIF (0x00000001U) //!< Bit mask for RTC_SR_TIF. #define BS_RTC_SR_TIF (1U) //!< Bit field size in bits for RTC_SR_TIF. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_SR_TIF field. #define BR_RTC_SR_TIF (BITBAND_ACCESS32(HW_RTC_SR_ADDR, BP_RTC_SR_TIF)) #endif //@} /*! * @name Register RTC_SR, field TOF[1] (RO) * * Time overflow flag is set when the time counter is enabled and overflows. The * TSR and TPR do not increment and read as zero when this bit is set. This bit * is cleared by writing the TSR register when the time counter is disabled. * * Values: * - 0 - Time overflow has not occurred. * - 1 - Time overflow has occurred and time counter is read as zero. */ //@{ #define BP_RTC_SR_TOF (1U) //!< Bit position for RTC_SR_TOF. #define BM_RTC_SR_TOF (0x00000002U) //!< Bit mask for RTC_SR_TOF. #define BS_RTC_SR_TOF (1U) //!< Bit field size in bits for RTC_SR_TOF. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_SR_TOF field. #define BR_RTC_SR_TOF (BITBAND_ACCESS32(HW_RTC_SR_ADDR, BP_RTC_SR_TOF)) #endif //@} /*! * @name Register RTC_SR, field TAF[2] (RO) * * Time alarm flag is set when the TAR[TAR] equals the TSR[TSR] and the TSR[TSR] * increments. This bit is cleared by writing the TAR register. * * Values: * - 0 - Time alarm has not occurred. * - 1 - Time alarm has occurred. */ //@{ #define BP_RTC_SR_TAF (2U) //!< Bit position for RTC_SR_TAF. #define BM_RTC_SR_TAF (0x00000004U) //!< Bit mask for RTC_SR_TAF. #define BS_RTC_SR_TAF (1U) //!< Bit field size in bits for RTC_SR_TAF. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_SR_TAF field. #define BR_RTC_SR_TAF (BITBAND_ACCESS32(HW_RTC_SR_ADDR, BP_RTC_SR_TAF)) #endif //@} /*! * @name Register RTC_SR, field TCE[4] (RW) * * When time counter is disabled the TSR register and TPR register are * writeable, but do not increment. When time counter is enabled the TSR register and TPR * register are not writeable, but increment. * * Values: * - 0 - Time counter is disabled. * - 1 - Time counter is enabled. */ //@{ #define BP_RTC_SR_TCE (4U) //!< Bit position for RTC_SR_TCE. #define BM_RTC_SR_TCE (0x00000010U) //!< Bit mask for RTC_SR_TCE. #define BS_RTC_SR_TCE (1U) //!< Bit field size in bits for RTC_SR_TCE. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_SR_TCE field. #define BR_RTC_SR_TCE (BITBAND_ACCESS32(HW_RTC_SR_ADDR, BP_RTC_SR_TCE)) #endif //! @brief Format value for bitfield RTC_SR_TCE. #define BF_RTC_SR_TCE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_SR_TCE), uint32_t) & BM_RTC_SR_TCE) #ifndef __LANGUAGE_ASM__ //! @brief Set the TCE field to a new value. #define BW_RTC_SR_TCE(v) (BITBAND_ACCESS32(HW_RTC_SR_ADDR, BP_RTC_SR_TCE) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_RTC_LR - RTC Lock Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_RTC_LR - RTC Lock Register (RW) * * Reset value: 0x000000FFU */ typedef union _hw_rtc_lr { uint32_t U; struct _hw_rtc_lr_bitfields { uint32_t RESERVED0 : 3; //!< [2:0] uint32_t TCL : 1; //!< [3] Time Compensation Lock uint32_t CRL : 1; //!< [4] Control Register Lock uint32_t SRL : 1; //!< [5] Status Register Lock uint32_t LRL : 1; //!< [6] Lock Register Lock uint32_t RESERVED1 : 25; //!< [31:7] } B; } hw_rtc_lr_t; #endif /*! * @name Constants and macros for entire RTC_LR register */ //@{ #define HW_RTC_LR_ADDR (REGS_RTC_BASE + 0x18U) #ifndef __LANGUAGE_ASM__ #define HW_RTC_LR (*(__IO hw_rtc_lr_t *) HW_RTC_LR_ADDR) #define HW_RTC_LR_RD() (HW_RTC_LR.U) #define HW_RTC_LR_WR(v) (HW_RTC_LR.U = (v)) #define HW_RTC_LR_SET(v) (HW_RTC_LR_WR(HW_RTC_LR_RD() | (v))) #define HW_RTC_LR_CLR(v) (HW_RTC_LR_WR(HW_RTC_LR_RD() & ~(v))) #define HW_RTC_LR_TOG(v) (HW_RTC_LR_WR(HW_RTC_LR_RD() ^ (v))) #endif //@} /* * Constants & macros for individual RTC_LR bitfields */ /*! * @name Register RTC_LR, field TCL[3] (RW) * * After being cleared, this bit can be set only by VBAT POR or software reset. * * Values: * - 0 - Time Compensation Register is locked and writes are ignored. * - 1 - Time Compensation Register is not locked and writes complete as normal. */ //@{ #define BP_RTC_LR_TCL (3U) //!< Bit position for RTC_LR_TCL. #define BM_RTC_LR_TCL (0x00000008U) //!< Bit mask for RTC_LR_TCL. #define BS_RTC_LR_TCL (1U) //!< Bit field size in bits for RTC_LR_TCL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_LR_TCL field. #define BR_RTC_LR_TCL (BITBAND_ACCESS32(HW_RTC_LR_ADDR, BP_RTC_LR_TCL)) #endif //! @brief Format value for bitfield RTC_LR_TCL. #define BF_RTC_LR_TCL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_LR_TCL), uint32_t) & BM_RTC_LR_TCL) #ifndef __LANGUAGE_ASM__ //! @brief Set the TCL field to a new value. #define BW_RTC_LR_TCL(v) (BITBAND_ACCESS32(HW_RTC_LR_ADDR, BP_RTC_LR_TCL) = (v)) #endif //@} /*! * @name Register RTC_LR, field CRL[4] (RW) * * After being cleared, this bit can only be set by VBAT POR. * * Values: * - 0 - Control Register is locked and writes are ignored. * - 1 - Control Register is not locked and writes complete as normal. */ //@{ #define BP_RTC_LR_CRL (4U) //!< Bit position for RTC_LR_CRL. #define BM_RTC_LR_CRL (0x00000010U) //!< Bit mask for RTC_LR_CRL. #define BS_RTC_LR_CRL (1U) //!< Bit field size in bits for RTC_LR_CRL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_LR_CRL field. #define BR_RTC_LR_CRL (BITBAND_ACCESS32(HW_RTC_LR_ADDR, BP_RTC_LR_CRL)) #endif //! @brief Format value for bitfield RTC_LR_CRL. #define BF_RTC_LR_CRL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_LR_CRL), uint32_t) & BM_RTC_LR_CRL) #ifndef __LANGUAGE_ASM__ //! @brief Set the CRL field to a new value. #define BW_RTC_LR_CRL(v) (BITBAND_ACCESS32(HW_RTC_LR_ADDR, BP_RTC_LR_CRL) = (v)) #endif //@} /*! * @name Register RTC_LR, field SRL[5] (RW) * * After being cleared, this bit can be set only by VBAT POR or software reset. * * Values: * - 0 - Status Register is locked and writes are ignored. * - 1 - Status Register is not locked and writes complete as normal. */ //@{ #define BP_RTC_LR_SRL (5U) //!< Bit position for RTC_LR_SRL. #define BM_RTC_LR_SRL (0x00000020U) //!< Bit mask for RTC_LR_SRL. #define BS_RTC_LR_SRL (1U) //!< Bit field size in bits for RTC_LR_SRL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_LR_SRL field. #define BR_RTC_LR_SRL (BITBAND_ACCESS32(HW_RTC_LR_ADDR, BP_RTC_LR_SRL)) #endif //! @brief Format value for bitfield RTC_LR_SRL. #define BF_RTC_LR_SRL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_LR_SRL), uint32_t) & BM_RTC_LR_SRL) #ifndef __LANGUAGE_ASM__ //! @brief Set the SRL field to a new value. #define BW_RTC_LR_SRL(v) (BITBAND_ACCESS32(HW_RTC_LR_ADDR, BP_RTC_LR_SRL) = (v)) #endif //@} /*! * @name Register RTC_LR, field LRL[6] (RW) * * After being cleared, this bit can be set only by VBAT POR or software reset. * * Values: * - 0 - Lock Register is locked and writes are ignored. * - 1 - Lock Register is not locked and writes complete as normal. */ //@{ #define BP_RTC_LR_LRL (6U) //!< Bit position for RTC_LR_LRL. #define BM_RTC_LR_LRL (0x00000040U) //!< Bit mask for RTC_LR_LRL. #define BS_RTC_LR_LRL (1U) //!< Bit field size in bits for RTC_LR_LRL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_LR_LRL field. #define BR_RTC_LR_LRL (BITBAND_ACCESS32(HW_RTC_LR_ADDR, BP_RTC_LR_LRL)) #endif //! @brief Format value for bitfield RTC_LR_LRL. #define BF_RTC_LR_LRL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_LR_LRL), uint32_t) & BM_RTC_LR_LRL) #ifndef __LANGUAGE_ASM__ //! @brief Set the LRL field to a new value. #define BW_RTC_LR_LRL(v) (BITBAND_ACCESS32(HW_RTC_LR_ADDR, BP_RTC_LR_LRL) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_RTC_IER - RTC Interrupt Enable Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_RTC_IER - RTC Interrupt Enable Register (RW) * * Reset value: 0x00000007U */ typedef union _hw_rtc_ier { uint32_t U; struct _hw_rtc_ier_bitfields { uint32_t TIIE : 1; //!< [0] Time Invalid Interrupt Enable uint32_t TOIE : 1; //!< [1] Time Overflow Interrupt Enable uint32_t TAIE : 1; //!< [2] Time Alarm Interrupt Enable uint32_t RESERVED0 : 1; //!< [3] uint32_t TSIE : 1; //!< [4] Time Seconds Interrupt Enable uint32_t RESERVED1 : 2; //!< [6:5] uint32_t WPON : 1; //!< [7] Wakeup Pin On uint32_t RESERVED2 : 24; //!< [31:8] } B; } hw_rtc_ier_t; #endif /*! * @name Constants and macros for entire RTC_IER register */ //@{ #define HW_RTC_IER_ADDR (REGS_RTC_BASE + 0x1CU) #ifndef __LANGUAGE_ASM__ #define HW_RTC_IER (*(__IO hw_rtc_ier_t *) HW_RTC_IER_ADDR) #define HW_RTC_IER_RD() (HW_RTC_IER.U) #define HW_RTC_IER_WR(v) (HW_RTC_IER.U = (v)) #define HW_RTC_IER_SET(v) (HW_RTC_IER_WR(HW_RTC_IER_RD() | (v))) #define HW_RTC_IER_CLR(v) (HW_RTC_IER_WR(HW_RTC_IER_RD() & ~(v))) #define HW_RTC_IER_TOG(v) (HW_RTC_IER_WR(HW_RTC_IER_RD() ^ (v))) #endif //@} /* * Constants & macros for individual RTC_IER bitfields */ /*! * @name Register RTC_IER, field TIIE[0] (RW) * * Values: * - 0 - Time invalid flag does not generate an interrupt. * - 1 - Time invalid flag does generate an interrupt. */ //@{ #define BP_RTC_IER_TIIE (0U) //!< Bit position for RTC_IER_TIIE. #define BM_RTC_IER_TIIE (0x00000001U) //!< Bit mask for RTC_IER_TIIE. #define BS_RTC_IER_TIIE (1U) //!< Bit field size in bits for RTC_IER_TIIE. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_IER_TIIE field. #define BR_RTC_IER_TIIE (BITBAND_ACCESS32(HW_RTC_IER_ADDR, BP_RTC_IER_TIIE)) #endif //! @brief Format value for bitfield RTC_IER_TIIE. #define BF_RTC_IER_TIIE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_IER_TIIE), uint32_t) & BM_RTC_IER_TIIE) #ifndef __LANGUAGE_ASM__ //! @brief Set the TIIE field to a new value. #define BW_RTC_IER_TIIE(v) (BITBAND_ACCESS32(HW_RTC_IER_ADDR, BP_RTC_IER_TIIE) = (v)) #endif //@} /*! * @name Register RTC_IER, field TOIE[1] (RW) * * Values: * - 0 - Time overflow flag does not generate an interrupt. * - 1 - Time overflow flag does generate an interrupt. */ //@{ #define BP_RTC_IER_TOIE (1U) //!< Bit position for RTC_IER_TOIE. #define BM_RTC_IER_TOIE (0x00000002U) //!< Bit mask for RTC_IER_TOIE. #define BS_RTC_IER_TOIE (1U) //!< Bit field size in bits for RTC_IER_TOIE. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_IER_TOIE field. #define BR_RTC_IER_TOIE (BITBAND_ACCESS32(HW_RTC_IER_ADDR, BP_RTC_IER_TOIE)) #endif //! @brief Format value for bitfield RTC_IER_TOIE. #define BF_RTC_IER_TOIE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_IER_TOIE), uint32_t) & BM_RTC_IER_TOIE) #ifndef __LANGUAGE_ASM__ //! @brief Set the TOIE field to a new value. #define BW_RTC_IER_TOIE(v) (BITBAND_ACCESS32(HW_RTC_IER_ADDR, BP_RTC_IER_TOIE) = (v)) #endif //@} /*! * @name Register RTC_IER, field TAIE[2] (RW) * * Values: * - 0 - Time alarm flag does not generate an interrupt. * - 1 - Time alarm flag does generate an interrupt. */ //@{ #define BP_RTC_IER_TAIE (2U) //!< Bit position for RTC_IER_TAIE. #define BM_RTC_IER_TAIE (0x00000004U) //!< Bit mask for RTC_IER_TAIE. #define BS_RTC_IER_TAIE (1U) //!< Bit field size in bits for RTC_IER_TAIE. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_IER_TAIE field. #define BR_RTC_IER_TAIE (BITBAND_ACCESS32(HW_RTC_IER_ADDR, BP_RTC_IER_TAIE)) #endif //! @brief Format value for bitfield RTC_IER_TAIE. #define BF_RTC_IER_TAIE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_IER_TAIE), uint32_t) & BM_RTC_IER_TAIE) #ifndef __LANGUAGE_ASM__ //! @brief Set the TAIE field to a new value. #define BW_RTC_IER_TAIE(v) (BITBAND_ACCESS32(HW_RTC_IER_ADDR, BP_RTC_IER_TAIE) = (v)) #endif //@} /*! * @name Register RTC_IER, field TSIE[4] (RW) * * The seconds interrupt is an edge-sensitive interrupt with a dedicated * interrupt vector. It is generated once a second and requires no software overhead * (there is no corresponding status flag to clear). * * Values: * - 0 - Seconds interrupt is disabled. * - 1 - Seconds interrupt is enabled. */ //@{ #define BP_RTC_IER_TSIE (4U) //!< Bit position for RTC_IER_TSIE. #define BM_RTC_IER_TSIE (0x00000010U) //!< Bit mask for RTC_IER_TSIE. #define BS_RTC_IER_TSIE (1U) //!< Bit field size in bits for RTC_IER_TSIE. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_IER_TSIE field. #define BR_RTC_IER_TSIE (BITBAND_ACCESS32(HW_RTC_IER_ADDR, BP_RTC_IER_TSIE)) #endif //! @brief Format value for bitfield RTC_IER_TSIE. #define BF_RTC_IER_TSIE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_IER_TSIE), uint32_t) & BM_RTC_IER_TSIE) #ifndef __LANGUAGE_ASM__ //! @brief Set the TSIE field to a new value. #define BW_RTC_IER_TSIE(v) (BITBAND_ACCESS32(HW_RTC_IER_ADDR, BP_RTC_IER_TSIE) = (v)) #endif //@} /*! * @name Register RTC_IER, field WPON[7] (RW) * * The wakeup pin is optional and not available on all devices. Whenever the * wakeup pin is enabled and this bit is set, the wakeup pin will assert. * * Values: * - 0 - No effect. * - 1 - If the wakeup pin is enabled, then the wakeup pin will assert. */ //@{ #define BP_RTC_IER_WPON (7U) //!< Bit position for RTC_IER_WPON. #define BM_RTC_IER_WPON (0x00000080U) //!< Bit mask for RTC_IER_WPON. #define BS_RTC_IER_WPON (1U) //!< Bit field size in bits for RTC_IER_WPON. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_IER_WPON field. #define BR_RTC_IER_WPON (BITBAND_ACCESS32(HW_RTC_IER_ADDR, BP_RTC_IER_WPON)) #endif //! @brief Format value for bitfield RTC_IER_WPON. #define BF_RTC_IER_WPON(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_IER_WPON), uint32_t) & BM_RTC_IER_WPON) #ifndef __LANGUAGE_ASM__ //! @brief Set the WPON field to a new value. #define BW_RTC_IER_WPON(v) (BITBAND_ACCESS32(HW_RTC_IER_ADDR, BP_RTC_IER_WPON) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_RTC_WAR - RTC Write Access Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_RTC_WAR - RTC Write Access Register (RW) * * Reset value: 0x000000FFU */ typedef union _hw_rtc_war { uint32_t U; struct _hw_rtc_war_bitfields { uint32_t TSRW : 1; //!< [0] Time Seconds Register Write uint32_t TPRW : 1; //!< [1] Time Prescaler Register Write uint32_t TARW : 1; //!< [2] Time Alarm Register Write uint32_t TCRW : 1; //!< [3] Time Compensation Register Write uint32_t CRW : 1; //!< [4] Control Register Write uint32_t SRW : 1; //!< [5] Status Register Write uint32_t LRW : 1; //!< [6] Lock Register Write uint32_t IERW : 1; //!< [7] Interrupt Enable Register Write uint32_t RESERVED0 : 24; //!< [31:8] } B; } hw_rtc_war_t; #endif /*! * @name Constants and macros for entire RTC_WAR register */ //@{ #define HW_RTC_WAR_ADDR (REGS_RTC_BASE + 0x800U) #ifndef __LANGUAGE_ASM__ #define HW_RTC_WAR (*(__IO hw_rtc_war_t *) HW_RTC_WAR_ADDR) #define HW_RTC_WAR_RD() (HW_RTC_WAR.U) #define HW_RTC_WAR_WR(v) (HW_RTC_WAR.U = (v)) #define HW_RTC_WAR_SET(v) (HW_RTC_WAR_WR(HW_RTC_WAR_RD() | (v))) #define HW_RTC_WAR_CLR(v) (HW_RTC_WAR_WR(HW_RTC_WAR_RD() & ~(v))) #define HW_RTC_WAR_TOG(v) (HW_RTC_WAR_WR(HW_RTC_WAR_RD() ^ (v))) #endif //@} /* * Constants & macros for individual RTC_WAR bitfields */ /*! * @name Register RTC_WAR, field TSRW[0] (RW) * * After being cleared, this bit is set only by system reset. It is not affected * by VBAT POR or software reset. * * Values: * - 0 - Writes to the Time Seconds Register are ignored. * - 1 - Writes to the Time Seconds Register complete as normal. */ //@{ #define BP_RTC_WAR_TSRW (0U) //!< Bit position for RTC_WAR_TSRW. #define BM_RTC_WAR_TSRW (0x00000001U) //!< Bit mask for RTC_WAR_TSRW. #define BS_RTC_WAR_TSRW (1U) //!< Bit field size in bits for RTC_WAR_TSRW. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_WAR_TSRW field. #define BR_RTC_WAR_TSRW (BITBAND_ACCESS32(HW_RTC_WAR_ADDR, BP_RTC_WAR_TSRW)) #endif //! @brief Format value for bitfield RTC_WAR_TSRW. #define BF_RTC_WAR_TSRW(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_WAR_TSRW), uint32_t) & BM_RTC_WAR_TSRW) #ifndef __LANGUAGE_ASM__ //! @brief Set the TSRW field to a new value. #define BW_RTC_WAR_TSRW(v) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR, BP_RTC_WAR_TSRW) = (v)) #endif //@} /*! * @name Register RTC_WAR, field TPRW[1] (RW) * * After being cleared, this bit is set only by system reset. It is not affected * by VBAT POR or software reset. * * Values: * - 0 - Writes to the Time Prescaler Register are ignored. * - 1 - Writes to the Time Prescaler Register complete as normal. */ //@{ #define BP_RTC_WAR_TPRW (1U) //!< Bit position for RTC_WAR_TPRW. #define BM_RTC_WAR_TPRW (0x00000002U) //!< Bit mask for RTC_WAR_TPRW. #define BS_RTC_WAR_TPRW (1U) //!< Bit field size in bits for RTC_WAR_TPRW. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_WAR_TPRW field. #define BR_RTC_WAR_TPRW (BITBAND_ACCESS32(HW_RTC_WAR_ADDR, BP_RTC_WAR_TPRW)) #endif //! @brief Format value for bitfield RTC_WAR_TPRW. #define BF_RTC_WAR_TPRW(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_WAR_TPRW), uint32_t) & BM_RTC_WAR_TPRW) #ifndef __LANGUAGE_ASM__ //! @brief Set the TPRW field to a new value. #define BW_RTC_WAR_TPRW(v) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR, BP_RTC_WAR_TPRW) = (v)) #endif //@} /*! * @name Register RTC_WAR, field TARW[2] (RW) * * After being cleared, this bit is set only by system reset. It is not affected * by VBAT POR or software reset. * * Values: * - 0 - Writes to the Time Alarm Register are ignored. * - 1 - Writes to the Time Alarm Register complete as normal. */ //@{ #define BP_RTC_WAR_TARW (2U) //!< Bit position for RTC_WAR_TARW. #define BM_RTC_WAR_TARW (0x00000004U) //!< Bit mask for RTC_WAR_TARW. #define BS_RTC_WAR_TARW (1U) //!< Bit field size in bits for RTC_WAR_TARW. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_WAR_TARW field. #define BR_RTC_WAR_TARW (BITBAND_ACCESS32(HW_RTC_WAR_ADDR, BP_RTC_WAR_TARW)) #endif //! @brief Format value for bitfield RTC_WAR_TARW. #define BF_RTC_WAR_TARW(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_WAR_TARW), uint32_t) & BM_RTC_WAR_TARW) #ifndef __LANGUAGE_ASM__ //! @brief Set the TARW field to a new value. #define BW_RTC_WAR_TARW(v) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR, BP_RTC_WAR_TARW) = (v)) #endif //@} /*! * @name Register RTC_WAR, field TCRW[3] (RW) * * After being cleared, this bit is set only by system reset. It is not affected * by VBAT POR or software reset. * * Values: * - 0 - Writes to the Time Compensation Register are ignored. * - 1 - Writes to the Time Compensation Register complete as normal. */ //@{ #define BP_RTC_WAR_TCRW (3U) //!< Bit position for RTC_WAR_TCRW. #define BM_RTC_WAR_TCRW (0x00000008U) //!< Bit mask for RTC_WAR_TCRW. #define BS_RTC_WAR_TCRW (1U) //!< Bit field size in bits for RTC_WAR_TCRW. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_WAR_TCRW field. #define BR_RTC_WAR_TCRW (BITBAND_ACCESS32(HW_RTC_WAR_ADDR, BP_RTC_WAR_TCRW)) #endif //! @brief Format value for bitfield RTC_WAR_TCRW. #define BF_RTC_WAR_TCRW(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_WAR_TCRW), uint32_t) & BM_RTC_WAR_TCRW) #ifndef __LANGUAGE_ASM__ //! @brief Set the TCRW field to a new value. #define BW_RTC_WAR_TCRW(v) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR, BP_RTC_WAR_TCRW) = (v)) #endif //@} /*! * @name Register RTC_WAR, field CRW[4] (RW) * * After being cleared, this bit is set only by system reset. It is not affected * by VBAT POR or software reset. * * Values: * - 0 - Writes to the Control Register are ignored. * - 1 - Writes to the Control Register complete as normal. */ //@{ #define BP_RTC_WAR_CRW (4U) //!< Bit position for RTC_WAR_CRW. #define BM_RTC_WAR_CRW (0x00000010U) //!< Bit mask for RTC_WAR_CRW. #define BS_RTC_WAR_CRW (1U) //!< Bit field size in bits for RTC_WAR_CRW. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_WAR_CRW field. #define BR_RTC_WAR_CRW (BITBAND_ACCESS32(HW_RTC_WAR_ADDR, BP_RTC_WAR_CRW)) #endif //! @brief Format value for bitfield RTC_WAR_CRW. #define BF_RTC_WAR_CRW(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_WAR_CRW), uint32_t) & BM_RTC_WAR_CRW) #ifndef __LANGUAGE_ASM__ //! @brief Set the CRW field to a new value. #define BW_RTC_WAR_CRW(v) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR, BP_RTC_WAR_CRW) = (v)) #endif //@} /*! * @name Register RTC_WAR, field SRW[5] (RW) * * After being cleared, this bit is set only by system reset. It is not affected * by VBAT POR or software reset. * * Values: * - 0 - Writes to the Status Register are ignored. * - 1 - Writes to the Status Register complete as normal. */ //@{ #define BP_RTC_WAR_SRW (5U) //!< Bit position for RTC_WAR_SRW. #define BM_RTC_WAR_SRW (0x00000020U) //!< Bit mask for RTC_WAR_SRW. #define BS_RTC_WAR_SRW (1U) //!< Bit field size in bits for RTC_WAR_SRW. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_WAR_SRW field. #define BR_RTC_WAR_SRW (BITBAND_ACCESS32(HW_RTC_WAR_ADDR, BP_RTC_WAR_SRW)) #endif //! @brief Format value for bitfield RTC_WAR_SRW. #define BF_RTC_WAR_SRW(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_WAR_SRW), uint32_t) & BM_RTC_WAR_SRW) #ifndef __LANGUAGE_ASM__ //! @brief Set the SRW field to a new value. #define BW_RTC_WAR_SRW(v) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR, BP_RTC_WAR_SRW) = (v)) #endif //@} /*! * @name Register RTC_WAR, field LRW[6] (RW) * * After being cleared, this bit is set only by system reset. It is not affected * by VBAT POR or software reset. * * Values: * - 0 - Writes to the Lock Register are ignored. * - 1 - Writes to the Lock Register complete as normal. */ //@{ #define BP_RTC_WAR_LRW (6U) //!< Bit position for RTC_WAR_LRW. #define BM_RTC_WAR_LRW (0x00000040U) //!< Bit mask for RTC_WAR_LRW. #define BS_RTC_WAR_LRW (1U) //!< Bit field size in bits for RTC_WAR_LRW. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_WAR_LRW field. #define BR_RTC_WAR_LRW (BITBAND_ACCESS32(HW_RTC_WAR_ADDR, BP_RTC_WAR_LRW)) #endif //! @brief Format value for bitfield RTC_WAR_LRW. #define BF_RTC_WAR_LRW(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_WAR_LRW), uint32_t) & BM_RTC_WAR_LRW) #ifndef __LANGUAGE_ASM__ //! @brief Set the LRW field to a new value. #define BW_RTC_WAR_LRW(v) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR, BP_RTC_WAR_LRW) = (v)) #endif //@} /*! * @name Register RTC_WAR, field IERW[7] (RW) * * After being cleared, this bit is set only by system reset. It is not affected * by VBAT POR or software reset. * * Values: * - 0 - Writes to the Interupt Enable Register are ignored. * - 1 - Writes to the Interrupt Enable Register complete as normal. */ //@{ #define BP_RTC_WAR_IERW (7U) //!< Bit position for RTC_WAR_IERW. #define BM_RTC_WAR_IERW (0x00000080U) //!< Bit mask for RTC_WAR_IERW. #define BS_RTC_WAR_IERW (1U) //!< Bit field size in bits for RTC_WAR_IERW. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_WAR_IERW field. #define BR_RTC_WAR_IERW (BITBAND_ACCESS32(HW_RTC_WAR_ADDR, BP_RTC_WAR_IERW)) #endif //! @brief Format value for bitfield RTC_WAR_IERW. #define BF_RTC_WAR_IERW(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_WAR_IERW), uint32_t) & BM_RTC_WAR_IERW) #ifndef __LANGUAGE_ASM__ //! @brief Set the IERW field to a new value. #define BW_RTC_WAR_IERW(v) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR, BP_RTC_WAR_IERW) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_RTC_RAR - RTC Read Access Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_RTC_RAR - RTC Read Access Register (RW) * * Reset value: 0x000000FFU */ typedef union _hw_rtc_rar { uint32_t U; struct _hw_rtc_rar_bitfields { uint32_t TSRR : 1; //!< [0] Time Seconds Register Read uint32_t TPRR : 1; //!< [1] Time Prescaler Register Read uint32_t TARR : 1; //!< [2] Time Alarm Register Read uint32_t TCRR : 1; //!< [3] Time Compensation Register Read uint32_t CRR : 1; //!< [4] Control Register Read uint32_t SRR : 1; //!< [5] Status Register Read uint32_t LRR : 1; //!< [6] Lock Register Read uint32_t IERR : 1; //!< [7] Interrupt Enable Register Read uint32_t RESERVED0 : 24; //!< [31:8] } B; } hw_rtc_rar_t; #endif /*! * @name Constants and macros for entire RTC_RAR register */ //@{ #define HW_RTC_RAR_ADDR (REGS_RTC_BASE + 0x804U) #ifndef __LANGUAGE_ASM__ #define HW_RTC_RAR (*(__IO hw_rtc_rar_t *) HW_RTC_RAR_ADDR) #define HW_RTC_RAR_RD() (HW_RTC_RAR.U) #define HW_RTC_RAR_WR(v) (HW_RTC_RAR.U = (v)) #define HW_RTC_RAR_SET(v) (HW_RTC_RAR_WR(HW_RTC_RAR_RD() | (v))) #define HW_RTC_RAR_CLR(v) (HW_RTC_RAR_WR(HW_RTC_RAR_RD() & ~(v))) #define HW_RTC_RAR_TOG(v) (HW_RTC_RAR_WR(HW_RTC_RAR_RD() ^ (v))) #endif //@} /* * Constants & macros for individual RTC_RAR bitfields */ /*! * @name Register RTC_RAR, field TSRR[0] (RW) * * After being cleared, this bit is set only by system reset. It is not affected * by VBAT POR or software reset. * * Values: * - 0 - Reads to the Time Seconds Register are ignored. * - 1 - Reads to the Time Seconds Register complete as normal. */ //@{ #define BP_RTC_RAR_TSRR (0U) //!< Bit position for RTC_RAR_TSRR. #define BM_RTC_RAR_TSRR (0x00000001U) //!< Bit mask for RTC_RAR_TSRR. #define BS_RTC_RAR_TSRR (1U) //!< Bit field size in bits for RTC_RAR_TSRR. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_RAR_TSRR field. #define BR_RTC_RAR_TSRR (BITBAND_ACCESS32(HW_RTC_RAR_ADDR, BP_RTC_RAR_TSRR)) #endif //! @brief Format value for bitfield RTC_RAR_TSRR. #define BF_RTC_RAR_TSRR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_RAR_TSRR), uint32_t) & BM_RTC_RAR_TSRR) #ifndef __LANGUAGE_ASM__ //! @brief Set the TSRR field to a new value. #define BW_RTC_RAR_TSRR(v) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR, BP_RTC_RAR_TSRR) = (v)) #endif //@} /*! * @name Register RTC_RAR, field TPRR[1] (RW) * * After being cleared, this bit is set only by system reset. It is not affected * by VBAT POR or software reset. * * Values: * - 0 - Reads to the Time Pprescaler Register are ignored. * - 1 - Reads to the Time Prescaler Register complete as normal. */ //@{ #define BP_RTC_RAR_TPRR (1U) //!< Bit position for RTC_RAR_TPRR. #define BM_RTC_RAR_TPRR (0x00000002U) //!< Bit mask for RTC_RAR_TPRR. #define BS_RTC_RAR_TPRR (1U) //!< Bit field size in bits for RTC_RAR_TPRR. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_RAR_TPRR field. #define BR_RTC_RAR_TPRR (BITBAND_ACCESS32(HW_RTC_RAR_ADDR, BP_RTC_RAR_TPRR)) #endif //! @brief Format value for bitfield RTC_RAR_TPRR. #define BF_RTC_RAR_TPRR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_RAR_TPRR), uint32_t) & BM_RTC_RAR_TPRR) #ifndef __LANGUAGE_ASM__ //! @brief Set the TPRR field to a new value. #define BW_RTC_RAR_TPRR(v) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR, BP_RTC_RAR_TPRR) = (v)) #endif //@} /*! * @name Register RTC_RAR, field TARR[2] (RW) * * After being cleared, this bit is set only by system reset. It is not affected * by VBAT POR or software reset. * * Values: * - 0 - Reads to the Time Alarm Register are ignored. * - 1 - Reads to the Time Alarm Register complete as normal. */ //@{ #define BP_RTC_RAR_TARR (2U) //!< Bit position for RTC_RAR_TARR. #define BM_RTC_RAR_TARR (0x00000004U) //!< Bit mask for RTC_RAR_TARR. #define BS_RTC_RAR_TARR (1U) //!< Bit field size in bits for RTC_RAR_TARR. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_RAR_TARR field. #define BR_RTC_RAR_TARR (BITBAND_ACCESS32(HW_RTC_RAR_ADDR, BP_RTC_RAR_TARR)) #endif //! @brief Format value for bitfield RTC_RAR_TARR. #define BF_RTC_RAR_TARR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_RAR_TARR), uint32_t) & BM_RTC_RAR_TARR) #ifndef __LANGUAGE_ASM__ //! @brief Set the TARR field to a new value. #define BW_RTC_RAR_TARR(v) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR, BP_RTC_RAR_TARR) = (v)) #endif //@} /*! * @name Register RTC_RAR, field TCRR[3] (RW) * * After being cleared, this bit is set only by system reset. It is not affected * by VBAT POR or software reset. * * Values: * - 0 - Reads to the Time Compensation Register are ignored. * - 1 - Reads to the Time Compensation Register complete as normal. */ //@{ #define BP_RTC_RAR_TCRR (3U) //!< Bit position for RTC_RAR_TCRR. #define BM_RTC_RAR_TCRR (0x00000008U) //!< Bit mask for RTC_RAR_TCRR. #define BS_RTC_RAR_TCRR (1U) //!< Bit field size in bits for RTC_RAR_TCRR. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_RAR_TCRR field. #define BR_RTC_RAR_TCRR (BITBAND_ACCESS32(HW_RTC_RAR_ADDR, BP_RTC_RAR_TCRR)) #endif //! @brief Format value for bitfield RTC_RAR_TCRR. #define BF_RTC_RAR_TCRR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_RAR_TCRR), uint32_t) & BM_RTC_RAR_TCRR) #ifndef __LANGUAGE_ASM__ //! @brief Set the TCRR field to a new value. #define BW_RTC_RAR_TCRR(v) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR, BP_RTC_RAR_TCRR) = (v)) #endif //@} /*! * @name Register RTC_RAR, field CRR[4] (RW) * * After being cleared, this bit is set only by system reset. It is not affected * by VBAT POR or software reset. * * Values: * - 0 - Reads to the Control Register are ignored. * - 1 - Reads to the Control Register complete as normal. */ //@{ #define BP_RTC_RAR_CRR (4U) //!< Bit position for RTC_RAR_CRR. #define BM_RTC_RAR_CRR (0x00000010U) //!< Bit mask for RTC_RAR_CRR. #define BS_RTC_RAR_CRR (1U) //!< Bit field size in bits for RTC_RAR_CRR. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_RAR_CRR field. #define BR_RTC_RAR_CRR (BITBAND_ACCESS32(HW_RTC_RAR_ADDR, BP_RTC_RAR_CRR)) #endif //! @brief Format value for bitfield RTC_RAR_CRR. #define BF_RTC_RAR_CRR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_RAR_CRR), uint32_t) & BM_RTC_RAR_CRR) #ifndef __LANGUAGE_ASM__ //! @brief Set the CRR field to a new value. #define BW_RTC_RAR_CRR(v) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR, BP_RTC_RAR_CRR) = (v)) #endif //@} /*! * @name Register RTC_RAR, field SRR[5] (RW) * * After being cleared, this bit is set only by system reset. It is not affected * by VBAT POR or software reset. * * Values: * - 0 - Reads to the Status Register are ignored. * - 1 - Reads to the Status Register complete as normal. */ //@{ #define BP_RTC_RAR_SRR (5U) //!< Bit position for RTC_RAR_SRR. #define BM_RTC_RAR_SRR (0x00000020U) //!< Bit mask for RTC_RAR_SRR. #define BS_RTC_RAR_SRR (1U) //!< Bit field size in bits for RTC_RAR_SRR. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_RAR_SRR field. #define BR_RTC_RAR_SRR (BITBAND_ACCESS32(HW_RTC_RAR_ADDR, BP_RTC_RAR_SRR)) #endif //! @brief Format value for bitfield RTC_RAR_SRR. #define BF_RTC_RAR_SRR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_RAR_SRR), uint32_t) & BM_RTC_RAR_SRR) #ifndef __LANGUAGE_ASM__ //! @brief Set the SRR field to a new value. #define BW_RTC_RAR_SRR(v) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR, BP_RTC_RAR_SRR) = (v)) #endif //@} /*! * @name Register RTC_RAR, field LRR[6] (RW) * * After being cleared, this bit is set only by system reset. It is not affected * by VBAT POR or software reset. * * Values: * - 0 - Reads to the Lock Register are ignored. * - 1 - Reads to the Lock Register complete as normal. */ //@{ #define BP_RTC_RAR_LRR (6U) //!< Bit position for RTC_RAR_LRR. #define BM_RTC_RAR_LRR (0x00000040U) //!< Bit mask for RTC_RAR_LRR. #define BS_RTC_RAR_LRR (1U) //!< Bit field size in bits for RTC_RAR_LRR. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_RAR_LRR field. #define BR_RTC_RAR_LRR (BITBAND_ACCESS32(HW_RTC_RAR_ADDR, BP_RTC_RAR_LRR)) #endif //! @brief Format value for bitfield RTC_RAR_LRR. #define BF_RTC_RAR_LRR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_RAR_LRR), uint32_t) & BM_RTC_RAR_LRR) #ifndef __LANGUAGE_ASM__ //! @brief Set the LRR field to a new value. #define BW_RTC_RAR_LRR(v) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR, BP_RTC_RAR_LRR) = (v)) #endif //@} /*! * @name Register RTC_RAR, field IERR[7] (RW) * * After being cleared, this bit is set only by system reset. It is not affected * by VBAT POR or software reset. * * Values: * - 0 - Reads to the Interrupt Enable Register are ignored. * - 1 - Reads to the Interrupt Enable Register complete as normal. */ //@{ #define BP_RTC_RAR_IERR (7U) //!< Bit position for RTC_RAR_IERR. #define BM_RTC_RAR_IERR (0x00000080U) //!< Bit mask for RTC_RAR_IERR. #define BS_RTC_RAR_IERR (1U) //!< Bit field size in bits for RTC_RAR_IERR. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the RTC_RAR_IERR field. #define BR_RTC_RAR_IERR (BITBAND_ACCESS32(HW_RTC_RAR_ADDR, BP_RTC_RAR_IERR)) #endif //! @brief Format value for bitfield RTC_RAR_IERR. #define BF_RTC_RAR_IERR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_RTC_RAR_IERR), uint32_t) & BM_RTC_RAR_IERR) #ifndef __LANGUAGE_ASM__ //! @brief Set the IERR field to a new value. #define BW_RTC_RAR_IERR(v) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR, BP_RTC_RAR_IERR) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // hw_rtc_t - module struct //------------------------------------------------------------------------------------------- /*! * @brief All RTC module registers. */ #ifndef __LANGUAGE_ASM__ #pragma pack(1) typedef struct _hw_rtc { __IO hw_rtc_tsr_t TSR; //!< [0x0] RTC Time Seconds Register __IO hw_rtc_tpr_t TPR; //!< [0x4] RTC Time Prescaler Register __IO hw_rtc_tar_t TAR; //!< [0x8] RTC Time Alarm Register __IO hw_rtc_tcr_t TCR; //!< [0xC] RTC Time Compensation Register __IO hw_rtc_cr_t CR; //!< [0x10] RTC Control Register __IO hw_rtc_sr_t SR; //!< [0x14] RTC Status Register __IO hw_rtc_lr_t LR; //!< [0x18] RTC Lock Register __IO hw_rtc_ier_t IER; //!< [0x1C] RTC Interrupt Enable Register uint8_t _reserved0[2016]; __IO hw_rtc_war_t WAR; //!< [0x800] RTC Write Access Register __IO hw_rtc_rar_t RAR; //!< [0x804] RTC Read Access Register } hw_rtc_t; #pragma pack() //! @brief Macro to access all RTC registers. //! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, //! use the '&' operator, like <code>&HW_RTC</code>. #define HW_RTC (*(hw_rtc_t *) REGS_RTC_BASE) #endif #endif // __HW_RTC_REGISTERS_H__ // v22/130726/0.9 // EOF